diff options
author | Linus Walleij <linus.walleij@linaro.org> | 2010-10-14 13:57:59 +0200 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2011-03-14 14:05:14 +0100 |
commit | 5d7b8467e18b14ed44c5781d77993bfdcd8c826b (patch) | |
tree | 0bc8e0cd883c9c6a0a8184c8e69b22a6a5b8bddf /arch/arm | |
parent | ec8f12533b4a439a8feb0d1a3bf15516781804be (diff) | |
download | op-kernel-dev-5d7b8467e18b14ed44c5781d77993bfdcd8c826b.zip op-kernel-dev-5d7b8467e18b14ed44c5781d77993bfdcd8c826b.tar.gz |
mach-ux500: config Ux500 PL011 PL022 PL180 for DMA
This will configure the platform data for the PL011, PL022
and PL180 (derivate) PrimeCells found in the Ux500 to use DMA
with the generic DMA engine for DMA40.
Signed-off-by: Per Forlin <per.forlin@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/mach-ux500/board-mop500-sdi.c | 77 | ||||
-rw-r--r-- | arch/arm/mach-ux500/board-mop500.c | 135 | ||||
-rw-r--r-- | arch/arm/mach-ux500/board-u5500-sdi.c | 25 | ||||
-rw-r--r-- | arch/arm/mach-ux500/board-u5500.c | 6 | ||||
-rw-r--r-- | arch/arm/mach-ux500/devices-common.h | 7 | ||||
-rw-r--r-- | arch/arm/mach-ux500/devices-db5500.h | 16 | ||||
-rw-r--r-- | arch/arm/mach-ux500/devices-db8500.c | 43 | ||||
-rw-r--r-- | arch/arm/mach-ux500/devices-db8500.h | 12 |
8 files changed, 288 insertions, 33 deletions
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 4ba3d93..d1ae6a0 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -13,12 +13,14 @@ #include <linux/platform_device.h> #include <plat/pincfg.h> +#include <plat/ste_dma40.h> #include <mach/devices.h> #include <mach/hardware.h> #include "devices-db8500.h" #include "pins-db8500.h" #include "board-mop500.h" +#include "ste-dma40-db8500.h" static pin_cfg_t mop500_sdi_pins[] = { /* SDI0 (MicroSD slot) */ @@ -86,6 +88,26 @@ static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd, MCI_DATA2DIREN | MCI_DATA31DIREN; } +#ifdef CONFIG_STE_DMA40 +struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_PERIPH_TO_MEM, + .src_dev_type = DB8500_DMA_DEV29_SD_MM0_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, +}; + +static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_MEM_TO_PERIPH, + .src_dev_type = STEDMA40_DEV_SRC_MEMORY, + .dst_dev_type = DB8500_DMA_DEV29_SD_MM0_TX, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, +}; +#endif + static struct mmci_platform_data mop500_sdi0_data = { .vdd_handler = mop500_sdi0_vdd_handler, .ocr_mask = MMC_VDD_29_30, @@ -93,6 +115,11 @@ static struct mmci_platform_data mop500_sdi0_data = { .capabilities = MMC_CAP_4_BIT_DATA, .gpio_cd = GPIO_SDMMC_CD, .gpio_wp = -1, +#ifdef CONFIG_STE_DMA40 + .dma_filter = stedma40_filter, + .dma_rx_param = &mop500_sdi0_dma_cfg_rx, + .dma_tx_param = &mop500_sdi0_dma_cfg_tx, +#endif }; void mop500_sdi_tc35892_init(void) @@ -116,18 +143,63 @@ void mop500_sdi_tc35892_init(void) * SDI 2 (POP eMMC, not on DB8500ed) */ +#ifdef CONFIG_STE_DMA40 +struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_PERIPH_TO_MEM, + .src_dev_type = DB8500_DMA_DEV28_SD_MM2_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, +}; + +static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_MEM_TO_PERIPH, + .src_dev_type = STEDMA40_DEV_SRC_MEMORY, + .dst_dev_type = DB8500_DMA_DEV28_SD_MM2_TX, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, +}; +#endif + static struct mmci_platform_data mop500_sdi2_data = { .ocr_mask = MMC_VDD_165_195, .f_max = 100000000, .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_cd = -1, .gpio_wp = -1, +#ifdef CONFIG_STE_DMA40 + .dma_filter = stedma40_filter, + .dma_rx_param = &mop500_sdi2_dma_cfg_rx, + .dma_tx_param = &mop500_sdi2_dma_cfg_tx, +#endif }; /* * SDI 4 (on-board eMMC) */ +#ifdef CONFIG_STE_DMA40 +struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_PERIPH_TO_MEM, + .src_dev_type = DB8500_DMA_DEV42_SD_MM4_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, +}; + +static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_MEM_TO_PERIPH, + .src_dev_type = STEDMA40_DEV_SRC_MEMORY, + .dst_dev_type = DB8500_DMA_DEV42_SD_MM4_TX, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, +}; +#endif + static struct mmci_platform_data mop500_sdi4_data = { .ocr_mask = MMC_VDD_29_30, .f_max = 100000000, @@ -135,6 +207,11 @@ static struct mmci_platform_data mop500_sdi4_data = { MMC_CAP_MMC_HIGHSPEED, .gpio_cd = -1, .gpio_wp = -1, +#ifdef CONFIG_STE_DMA40 + .dma_filter = stedma40_filter, + .dma_rx_param = &mop500_sdi4_dma_cfg_rx, + .dma_tx_param = &mop500_sdi4_dma_cfg_tx, +#endif }; void __init mop500_sdi_init(void) diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 5babce4..67d9c63 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -17,6 +17,7 @@ #include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/pl022.h> +#include <linux/amba/serial.h> #include <linux/spi/spi.h> #include <linux/mfd/ab8500.h> #include <linux/mfd/tc3589x.h> @@ -29,12 +30,14 @@ #include <plat/pincfg.h> #include <plat/i2c.h> +#include <plat/ste_dma40.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> #include <mach/irqs.h> +#include "ste-dma40-db8500.h" #include "devices-db8500.h" #include "pins-db8500.h" #include "board-mop500.h" @@ -123,16 +126,6 @@ struct platform_device ab8500_device = { .resource = ab8500_resources, }; -static struct pl022_ssp_controller ssp0_platform_data = { - .bus_id = 0, - /* pl022 not yet supports dma */ - .enable_dma = 0, - /* on this platform, gpio 31,142,144,214 & - * 224 are connected as chip selects - */ - .num_chipselect = 5, -}; - /* * TC35892 */ @@ -319,16 +312,132 @@ static struct platform_device *platform_devs[] __initdata = { &mop500_gpio_keys_device, }; +#ifdef CONFIG_STE_DMA40 +static struct stedma40_chan_cfg ssp0_dma_cfg_rx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_PERIPH_TO_MEM, + .src_dev_type = DB8500_DMA_DEV8_SSP0_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, +}; + +static struct stedma40_chan_cfg ssp0_dma_cfg_tx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_MEM_TO_PERIPH, + .src_dev_type = STEDMA40_DEV_SRC_MEMORY, + .dst_dev_type = DB8500_DMA_DEV8_SSP0_TX, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, +}; +#endif + +static struct pl022_ssp_controller ssp0_platform_data = { + .bus_id = 0, +#ifdef CONFIG_STE_DMA40 + .enable_dma = 1, + .dma_filter = stedma40_filter, + .dma_rx_param = &ssp0_dma_cfg_rx, + .dma_tx_param = &ssp0_dma_cfg_tx, +#else + .enable_dma = 0, +#endif + /* on this platform, gpio 31,142,144,214 & + * 224 are connected as chip selects + */ + .num_chipselect = 5, +}; + static void __init mop500_spi_init(void) { db8500_add_ssp0(&ssp0_platform_data); } +#ifdef CONFIG_STE_DMA40 +static struct stedma40_chan_cfg uart0_dma_cfg_rx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_PERIPH_TO_MEM, + .src_dev_type = DB8500_DMA_DEV13_UART0_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, +}; + +static struct stedma40_chan_cfg uart0_dma_cfg_tx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_MEM_TO_PERIPH, + .src_dev_type = STEDMA40_DEV_SRC_MEMORY, + .dst_dev_type = DB8500_DMA_DEV13_UART0_TX, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, +}; + +static struct stedma40_chan_cfg uart1_dma_cfg_rx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_PERIPH_TO_MEM, + .src_dev_type = DB8500_DMA_DEV12_UART1_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, +}; + +static struct stedma40_chan_cfg uart1_dma_cfg_tx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_MEM_TO_PERIPH, + .src_dev_type = STEDMA40_DEV_SRC_MEMORY, + .dst_dev_type = DB8500_DMA_DEV12_UART1_TX, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, +}; + +static struct stedma40_chan_cfg uart2_dma_cfg_rx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_PERIPH_TO_MEM, + .src_dev_type = DB8500_DMA_DEV11_UART2_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, +}; + +static struct stedma40_chan_cfg uart2_dma_cfg_tx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_MEM_TO_PERIPH, + .src_dev_type = STEDMA40_DEV_SRC_MEMORY, + .dst_dev_type = DB8500_DMA_DEV11_UART2_TX, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, +}; +#endif + +static struct amba_pl011_data uart0_plat = { +#ifdef CONFIG_STE_DMA40 + .dma_filter = stedma40_filter, + .dma_rx_param = &uart0_dma_cfg_rx, + .dma_tx_param = &uart0_dma_cfg_tx, +#endif +}; + +static struct amba_pl011_data uart1_plat = { +#ifdef CONFIG_STE_DMA40 + .dma_filter = stedma40_filter, + .dma_rx_param = &uart1_dma_cfg_rx, + .dma_tx_param = &uart1_dma_cfg_tx, +#endif +}; + +static struct amba_pl011_data uart2_plat = { +#ifdef CONFIG_STE_DMA40 + .dma_filter = stedma40_filter, + .dma_rx_param = &uart2_dma_cfg_rx, + .dma_tx_param = &uart2_dma_cfg_tx, +#endif +}; + static void __init mop500_uart_init(void) { - db8500_add_uart0(); - db8500_add_uart1(); - db8500_add_uart2(); + db8500_add_uart0(&uart0_plat); + db8500_add_uart1(&uart1_plat); + db8500_add_uart2(&uart2_plat); } static void __init u8500_init_machine(void) diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c index 54712ac..739fb4c 100644 --- a/arch/arm/mach-ux500/board-u5500-sdi.c +++ b/arch/arm/mach-ux500/board-u5500-sdi.c @@ -31,6 +31,26 @@ static pin_cfg_t u5500_sdi_pins[] = { GPIO14_MC0_CLK | PIN_DIR_OUTPUT | PIN_VAL_LOW, }; +#ifdef CONFIG_STE_DMA40 +struct stedma40_chan_cfg u5500_sdi0_dma_cfg_rx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_PERIPH_TO_MEM, + .src_dev_type = DB5500_DMA_DEV24_SDMMC0_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, +}; + +static struct stedma40_chan_cfg u5500_sdi0_dma_cfg_tx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_MEM_TO_PERIPH, + .src_dev_type = STEDMA40_DEV_SRC_MEMORY, + .dst_dev_type = DB5500_DMA_DEV24_SDMMC0_TX, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, +}; +#endif + static struct mmci_platform_data u5500_sdi0_data = { .ocr_mask = MMC_VDD_165_195, .f_max = 50000000, @@ -39,6 +59,11 @@ static struct mmci_platform_data u5500_sdi0_data = { MMC_CAP_MMC_HIGHSPEED, .gpio_cd = -1, .gpio_wp = -1, +#ifdef CONFIG_STE_DMA40 + .dma_filter = stedma40_filter, + .dma_rx_param = &u5500_sdi0_dma_cfg_rx, + .dma_tx_param = &u5500_sdi0_dma_cfg_tx, +#endif }; void __init u5500_sdi_init(void) diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c index 39d370c..44fd3b5 100644 --- a/arch/arm/mach-ux500/board-u5500.c +++ b/arch/arm/mach-ux500/board-u5500.c @@ -22,9 +22,9 @@ static void __init u5500_uart_init(void) { - db5500_add_uart0(); - db5500_add_uart1(); - db5500_add_uart2(); + db5500_add_uart0(NULL); + db5500_add_uart1(NULL); + db5500_add_uart2(NULL); } static void __init u5500_init_machine(void) diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h index cbadc11..c719b5a1 100644 --- a/arch/arm/mach-ux500/devices-common.h +++ b/arch/arm/mach-ux500/devices-common.h @@ -42,10 +42,13 @@ dbx500_add_sdi(const char *name, resource_size_t base, int irq, return dbx500_add_amba_device(name, base, irq, pdata, 0); } +struct amba_pl011_data; + static inline struct amba_device * -dbx500_add_uart(const char *name, resource_size_t base, int irq) +dbx500_add_uart(const char *name, resource_size_t base, int irq, + struct amba_pl011_data *pdata) { - return dbx500_add_amba_device(name, base, irq, NULL, 0); + return dbx500_add_amba_device(name, base, irq, pdata, 0); } struct nmk_i2c_controller; diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h index 481ae5c..94627f7 100644 --- a/arch/arm/mach-ux500/devices-db5500.h +++ b/arch/arm/mach-ux500/devices-db5500.h @@ -57,13 +57,13 @@ #define db5500_add_spi3(pdata) \ dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata) -#define db5500_add_uart0() \ - dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0) -#define db5500_add_uart1() \ - dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1) -#define db5500_add_uart2() \ - dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2) -#define db5500_add_uart3() \ - dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3) +#define db5500_add_uart0(plat) \ + dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat) +#define db5500_add_uart1(plat) \ + dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1, plat) +#define db5500_add_uart2(plat) \ + dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2, plat) +#define db5500_add_uart3(plat) \ + dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3, plat) #endif diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index f122d4e..73b1740 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -11,6 +11,7 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/amba/bus.h> +#include <linux/amba/pl022.h> #include <plat/ste_dma40.h> @@ -67,7 +68,9 @@ struct stedma40_chan_cfg dma40_memcpy_conf_log = { /* * Mapping between destination event lines and physical device address. - * The event line is tied to a device and therefor the address is constant. + * The event line is tied to a device and therefore the address is constant. + * When the address comes from a primecell it will be configured in runtime + * and we set the address to -1 as a placeholder. */ static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = { /* MUSB - these will be runtime-reconfigured */ @@ -79,6 +82,25 @@ static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = { [DB8500_DMA_DEV36_USB_OTG_OEP_3_11] = -1, [DB8500_DMA_DEV37_USB_OTG_OEP_2_10] = -1, [DB8500_DMA_DEV38_USB_OTG_OEP_1_9] = -1, + /* PrimeCells - run-time configured */ + [DB8500_DMA_DEV0_SPI0_TX] = -1, + [DB8500_DMA_DEV1_SD_MMC0_TX] = -1, + [DB8500_DMA_DEV2_SD_MMC1_TX] = -1, + [DB8500_DMA_DEV3_SD_MMC2_TX] = -1, + [DB8500_DMA_DEV8_SSP0_TX] = -1, + [DB8500_DMA_DEV9_SSP1_TX] = -1, + [DB8500_DMA_DEV11_UART2_TX] = -1, + [DB8500_DMA_DEV12_UART1_TX] = -1, + [DB8500_DMA_DEV13_UART0_TX] = -1, + [DB8500_DMA_DEV28_SD_MM2_TX] = -1, + [DB8500_DMA_DEV29_SD_MM0_TX] = -1, + [DB8500_DMA_DEV32_SD_MM1_TX] = -1, + [DB8500_DMA_DEV33_SPI2_TX] = -1, + [DB8500_DMA_DEV35_SPI1_TX] = -1, + [DB8500_DMA_DEV40_SPI3_TX] = -1, + [DB8500_DMA_DEV41_SD_MM3_TX] = -1, + [DB8500_DMA_DEV42_SD_MM4_TX] = -1, + [DB8500_DMA_DEV43_SD_MM5_TX] = -1, }; /* Mapping between source event lines and physical device address */ @@ -92,6 +114,25 @@ static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = { [DB8500_DMA_DEV36_USB_OTG_IEP_3_11] = -1, [DB8500_DMA_DEV37_USB_OTG_IEP_2_10] = -1, [DB8500_DMA_DEV38_USB_OTG_IEP_1_9] = -1, + /* PrimeCells */ + [DB8500_DMA_DEV0_SPI0_RX] = -1, + [DB8500_DMA_DEV1_SD_MMC0_RX] = -1, + [DB8500_DMA_DEV2_SD_MMC1_RX] = -1, + [DB8500_DMA_DEV3_SD_MMC2_RX] = -1, + [DB8500_DMA_DEV8_SSP0_RX] = -1, + [DB8500_DMA_DEV9_SSP1_RX] = -1, + [DB8500_DMA_DEV11_UART2_RX] = -1, + [DB8500_DMA_DEV12_UART1_RX] = -1, + [DB8500_DMA_DEV13_UART0_RX] = -1, + [DB8500_DMA_DEV28_SD_MM2_RX] = -1, + [DB8500_DMA_DEV29_SD_MM0_RX] = -1, + [DB8500_DMA_DEV32_SD_MM1_RX] = -1, + [DB8500_DMA_DEV33_SPI2_RX] = -1, + [DB8500_DMA_DEV35_SPI1_RX] = -1, + [DB8500_DMA_DEV40_SPI3_RX] = -1, + [DB8500_DMA_DEV41_SD_MM3_RX] = -1, + [DB8500_DMA_DEV42_SD_MM4_RX] = -1, + [DB8500_DMA_DEV43_SD_MM5_RX] = -1, }; /* Reserved event lines for memcpy only */ diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index d1ea4bd0..9cc6f8f 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -91,11 +91,11 @@ db8500_add_ssp(const char *name, resource_size_t base, int irq, #define db8500_add_spi3(pdata) \ dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata) -#define db8500_add_uart0() \ - dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0) -#define db8500_add_uart1() \ - dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1) -#define db8500_add_uart2() \ - dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2) +#define db8500_add_uart0(pdata) \ + dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata) +#define db8500_add_uart1(pdata) \ + dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1, pdata) +#define db8500_add_uart2(pdata) \ + dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2, pdata) #endif |