summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-02-21 15:33:45 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2013-02-21 15:33:45 -0800
commit6c5096e5538b455bc3bea2b02588c380f070d8c6 (patch)
treea2d08974a0c6a6fd19dff90bd3ab1827c23a5764 /arch/arm
parentbab588fcfb6335c767d811a8955979f5440328e0 (diff)
parentf628e3d92465303792d52c98fb0c95bef558f936 (diff)
downloadop-kernel-dev-6c5096e5538b455bc3bea2b02588c380f070d8c6.zip
op-kernel-dev-6c5096e5538b455bc3bea2b02588c380f070d8c6.tar.gz
Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC board specific changes from Arnd Bergmann: "These updates are all for board specific code, including - defconfig updates for shmobile, davinci, bcm2835, imx, omap and tegra - SD/MMC and I2C support on bcm2835 (Raspberry PI) - minor updates for PXA - shmobile updates to GPIO usage in board files - More things in OMAP board files are moved over to device tree probing - Better support for audio devices on some OMAP platforms" * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits) ARM: imx_v4_v5_defconfig: Add VPU support ARM: imx: configs: enable netfilter support ARM: OMAP2+: Fix twl section warnings related to omap_twl4030_audio_init ARM: OMAP2+: omap2plus_defconfig: enable omap1 rtc RX-51: Register twl4030-madc device RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernel ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers ARM: OMAP1: nokia770: enable CBUS/Retu ARM: OMAP2+: omap2plus_defconfig: enable CMA allocator ARM: OMAP2+: omap2plus_defconfig: enable TFP410 chip support ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies ARM: OMAP2+: craneboard: support the TPS65910 PMU ARM: OMAP2+: craneboard: support NAND device ARM: OMAP3: cm-t3517: add MMC support ARM: OMAP2+: Remove apollon board support ARM: shmobile: armadillo800eva: set clock rates before timer init ARM: tegra: defconfig updates ARM: shmobile: mackerel: Use gpio_request_one() ARM: shmobile: kzm9g: Use gpio_request_one() ARM: shmobile: bonito: Use gpio_request_one() ...
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/boot/dts/emev2-kzm9d.dts2
-rw-r--r--arch/arm/boot/dts/r8a7740-armadillo800eva.dts6
-rw-r--r--arch/arm/boot/dts/sh7372-mackerel.dts6
-rw-r--r--arch/arm/boot/dts/sh73a0-kzm9g.dts6
-rw-r--r--arch/arm/configs/armadillo800eva_defconfig10
-rw-r--r--arch/arm/configs/bcm2835_defconfig43
-rw-r--r--arch/arm/configs/da8xx_omapl_defconfig3
-rw-r--r--arch/arm/configs/davinci_all_defconfig3
-rw-r--r--arch/arm/configs/imx_v4_v5_defconfig3
-rw-r--r--arch/arm/configs/imx_v6_v7_defconfig1
-rw-r--r--arch/arm/configs/kota2_defconfig2
-rw-r--r--arch/arm/configs/kzm9d_defconfig4
-rw-r--r--arch/arm/configs/kzm9g_defconfig4
-rw-r--r--arch/arm/configs/mackerel_defconfig3
-rw-r--r--arch/arm/configs/omap2plus_defconfig25
-rw-r--r--arch/arm/configs/tegra_defconfig6
-rw-r--r--arch/arm/mach-davinci/board-da850-evm.c102
-rw-r--r--arch/arm/mach-davinci/board-omapl138-hawk.c30
-rw-r--r--arch/arm/mach-omap1/board-nokia770.c43
-rw-r--r--arch/arm/mach-omap2/Kconfig6
-rw-r--r--arch/arm/mach-omap2/Makefile1
-rw-r--r--arch/arm/mach-omap2/board-3430sdp.c20
-rw-r--r--arch/arm/mach-omap2/board-4430sdp.c30
-rw-r--r--arch/arm/mach-omap2/board-am3517crane.c59
-rw-r--r--arch/arm/mach-omap2/board-apollon.c342
-rw-r--r--arch/arm/mach-omap2/board-cm-t35.c2
-rw-r--r--arch/arm/mach-omap2/board-cm-t3517.c27
-rw-r--r--arch/arm/mach-omap2/board-devkit8000.c2
-rw-r--r--arch/arm/mach-omap2/board-igep0020.c18
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c41
-rw-r--r--arch/arm/mach-omap2/board-omap3evm.c2
-rw-r--r--arch/arm/mach-omap2/board-overo.c2
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c20
-rw-r--r--arch/arm/mach-omap2/board-zoom-peripherals.c39
-rw-r--r--arch/arm/mach-omap2/gpmc.c3
-rw-r--r--arch/arm/mach-omap2/twl-common.c17
-rw-r--r--arch/arm/mach-omap2/twl-common.h3
-rw-r--r--arch/arm/mach-pxa/palmtreo.c35
-rw-r--r--arch/arm/mach-pxa/pxa27x.c1
-rw-r--r--arch/arm/mach-shmobile/board-ag5evm.c22
-rw-r--r--arch/arm/mach-shmobile/board-ap4evb.c37
-rw-r--r--arch/arm/mach-shmobile/board-armadillo800eva.c65
-rw-r--r--arch/arm/mach-shmobile/board-bonito.c7
-rw-r--r--arch/arm/mach-shmobile/board-kota2.c9
-rw-r--r--arch/arm/mach-shmobile/board-kzm9g.c20
-rw-r--r--arch/arm/mach-shmobile/board-mackerel.c20
46 files changed, 536 insertions, 616 deletions
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index 297e3ba..b9b3241 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -21,6 +21,6 @@
};
chosen {
- bootargs = "console=ttyS1,115200n81";
+ bootargs = "console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
};
};
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index a7505a9..93da655 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -9,12 +9,16 @@
*/
/dts-v1/;
-/include/ "skeleton.dtsi"
+/include/ "r8a7740.dtsi"
/ {
model = "armadillo 800 eva";
compatible = "renesas,armadillo800eva";
+ chosen {
+ bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw";
+ };
+
memory {
device_type = "memory";
reg = <0x40000000 0x20000000>;
diff --git a/arch/arm/boot/dts/sh7372-mackerel.dts b/arch/arm/boot/dts/sh7372-mackerel.dts
index 286f0ca..8acf51e 100644
--- a/arch/arm/boot/dts/sh7372-mackerel.dts
+++ b/arch/arm/boot/dts/sh7372-mackerel.dts
@@ -9,12 +9,16 @@
*/
/dts-v1/;
-/include/ "skeleton.dtsi"
+/include/ "sh7372.dtsi"
/ {
model = "Mackerel (AP4 EVM 2nd)";
compatible = "renesas,mackerel";
+ chosen {
+ bootargs = "console=tty0, console=ttySC0,115200 earlyprintk=sh-sci.0,115200 root=/dev/nfs nfsroot=,tcp,v3 ip=dhcp mem=240m rw";
+ };
+
memory {
device_type = "memory";
reg = <0x40000000 0x10000000>;
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index bcb9119..7c4071e 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -9,12 +9,16 @@
*/
/dts-v1/;
-/include/ "skeleton.dtsi"
+/include/ "sh73a0.dtsi"
/ {
model = "KZM-A9-GT";
compatible = "renesas,kzm9g", "renesas,sh73a0";
+ chosen {
+ bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200";
+ };
+
memory {
device_type = "memory";
reg = <0x41000000 0x1e800000>;
diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig
index 2e1a825..0b98100 100644
--- a/arch/arm/configs/armadillo800eva_defconfig
+++ b/arch/arm/configs/armadillo800eva_defconfig
@@ -34,12 +34,11 @@ CONFIG_AEABI=y
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw"
-CONFIG_CMDLINE_FORCE=y
+CONFIG_ARM_APPENDED_DTB=y
CONFIG_KEXEC=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_SUSPEND is not set
+CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -91,14 +90,11 @@ CONFIG_I2C_SH_MOBILE=y
# CONFIG_HWMON is not set
CONFIG_MEDIA_SUPPORT=y
CONFIG_VIDEO_DEV=y
-# CONFIG_RC_CORE is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-# CONFIG_V4L_USB_DRIVERS is not set
+CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SOC_CAMERA=y
CONFIG_SOC_CAMERA_MT9T112=y
CONFIG_VIDEO_SH_MOBILE_CEU=y
-# CONFIG_RADIO_ADAPTERS is not set
CONFIG_FB=y
CONFIG_FB_SH_MOBILE_LCDC=y
CONFIG_FB_SH_MOBILE_HDMI=y
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 74e27f0..af472e4 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -1,11 +1,10 @@
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
@@ -30,13 +29,10 @@ CONFIG_EMBEDDED=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_JUMP_LABEL=y
-# CONFIG_BLOCK is not set
CONFIG_ARCH_BCM2835=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
-CONFIG_COMPACTION=y
CONFIG_KSM=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_CLEANCACHE=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
@@ -45,6 +41,11 @@ CONFIG_CRASH_DUMP=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_NETWORK_SECMARK=y
+# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
@@ -53,20 +54,42 @@ CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
-# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_TTY_PRINTK=y
# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_BCM2835=y
+CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_BCM2835=y
# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_FILE_LOCKING is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_FANOTIFY=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFSD=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig
index f292239..6b36a5a 100644
--- a/arch/arm/configs/da8xx_omapl_defconfig
+++ b/arch/arm/configs/da8xx_omapl_defconfig
@@ -36,6 +36,7 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_IDLE=y
+CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -45,6 +46,8 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_LRO is not set
CONFIG_NETFILTER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_FW_LOADER is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_RAM=y
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 4ea7c95..3edc78a 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -33,6 +33,7 @@ CONFIG_AEABI=y
CONFIG_LEDS=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -42,6 +43,8 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_LRO is not set
CONFIG_NETFILTER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_FW_LOADER is not set
CONFIG_MTD=m
CONFIG_MTD_PARTITIONS=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index ebbfb27..02c657a 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -61,6 +61,7 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
@@ -127,6 +128,8 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_SOC_CAMERA=y
CONFIG_SOC_CAMERA_OV2640=y
CONFIG_VIDEO_MX2=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_CODA=y
CONFIG_FB=y
CONFIG_FB_IMX=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 0a39667..e36b010 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -59,6 +59,7 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_IPV6=y
+CONFIG_NETFILTER=y
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
diff --git a/arch/arm/configs/kota2_defconfig b/arch/arm/configs/kota2_defconfig
index fa83db1..57ad3d4 100644
--- a/arch/arm/configs/kota2_defconfig
+++ b/arch/arm/configs/kota2_defconfig
@@ -21,7 +21,7 @@ CONFIG_ARCH_SHMOBILE=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_ARCH_SH73A0=y
CONFIG_MACH_KOTA2=y
-CONFIG_MEMORY_SIZE=0x1e0000000
+CONFIG_MEMORY_SIZE=0x1e000000
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_SWP_EMULATE is not set
CONFIG_CPU_BPREDICT_DISABLE=y
diff --git a/arch/arm/configs/kzm9d_defconfig b/arch/arm/configs/kzm9d_defconfig
index 8c49df6..6c37f4a 100644
--- a/arch/arm/configs/kzm9d_defconfig
+++ b/arch/arm/configs/kzm9d_defconfig
@@ -32,11 +32,9 @@ CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
-CONFIG_CMDLINE="console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"
-CONFIG_CMDLINE_FORCE=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_SUSPEND is not set
+CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
index afbae28..670c3b6 100644
--- a/arch/arm/configs/kzm9g_defconfig
+++ b/arch/arm/configs/kzm9g_defconfig
@@ -39,7 +39,7 @@ CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200"
+CONFIG_ARM_APPENDED_DTB=y
CONFIG_KEXEC=y
CONFIG_VFP=y
CONFIG_NEON=y
@@ -85,6 +85,8 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_SH_MOBILE=y
CONFIG_GPIO_PCF857X=y
# CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DUMMY=y
CONFIG_FB=y
CONFIG_FB_SH_MOBILE_LCDC=y
CONFIG_FRAMEBUFFER_CONSOLE=y
diff --git a/arch/arm/configs/mackerel_defconfig b/arch/arm/configs/mackerel_defconfig
index 2098ce1..7594b3a 100644
--- a/arch/arm/configs/mackerel_defconfig
+++ b/arch/arm/configs/mackerel_defconfig
@@ -23,8 +23,9 @@ CONFIG_AEABI=y
CONFIG_FORCE_MAX_ZONEORDER=15
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 earlyprintk=sh-sci.0,115200 root=/dev/nfs nfsroot=,tcp,v3 ip=dhcp memchunk.vpu=64m memchunk.veu0=8m memchunk.spu0=2m mem=240m"
+CONFIG_ARM_APPENDED_DTB=y
CONFIG_KEXEC=y
+CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_PM=y
CONFIG_PM_RUNTIME=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 5be2e4b..b16bae2 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -53,6 +53,11 @@ CONFIG_IP_PNP_RARP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_BT=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
@@ -65,6 +70,7 @@ CONFIG_MAC80211=m
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_CMA=y
CONFIG_CONNECTOR=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
@@ -84,6 +90,9 @@ CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_SENSORS_LIS3LV02D=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_LIS3_I2C=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
@@ -109,6 +118,7 @@ CONFIG_USB_KC2190=y
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_MATRIX=m
CONFIG_KEYBOARD_TWL4030=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
@@ -134,14 +144,17 @@ CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_TWL4030=y
CONFIG_W1=y
CONFIG_POWER_SUPPLY=y
+CONFIG_SENSORS_LM75=m
CONFIG_WATCHDOG=y
CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
CONFIG_MFD_TPS65217=y
+CONFIG_MFD_TPS65910=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65217=y
+CONFIG_REGULATOR_TPS65910=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
@@ -153,6 +166,7 @@ CONFIG_OMAP2_DSS_SDI=y
CONFIG_OMAP2_DSS_DSI=y
CONFIG_FB_OMAP2=m
CONFIG_PANEL_GENERIC_DPI=m
+CONFIG_PANEL_TFP410=m
CONFIG_PANEL_SHARP_LS037V7DW01=m
CONFIG_PANEL_NEC_NL8048HL11_01B=m
CONFIG_PANEL_TAAL=m
@@ -200,9 +214,20 @@ CONFIG_SDIO_UART=y
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_TWL92330=y
CONFIG_RTC_DRV_TWL4030=y
+CONFIG_RTC_DRV_OMAP=y
CONFIG_DMADEVICES=y
CONFIG_DMA_OMAP=y
CONFIG_EXT2_FS=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index a7827fd..aba4881 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -38,6 +38,7 @@ CONFIG_HIGHMEM=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_AUTO_ZRELADDR=y
+CONFIG_KEXEC=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_IDLE=y
@@ -106,12 +107,14 @@ CONFIG_BRCMFMAC=m
CONFIG_RT2X00=y
CONFIG_RT2800USB=m
CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_TEGRA=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MPU3050=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
@@ -127,6 +130,8 @@ CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
CONFIG_POWER_SUPPLY=y
CONFIG_BATTERY_SBS=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
CONFIG_SENSORS_LM90=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
@@ -186,6 +191,7 @@ CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_DRV_MAX8907=y
+CONFIG_RTC_DRV_TPS6586X=y
CONFIG_RTC_DRV_TPS65910=y
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_TEGRA=y
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 3a76a47..1f50a65 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -349,13 +349,13 @@ static inline void da850_evm_setup_nor_nand(void)
if (!HAS_MMC) {
ret = davinci_cfg_reg_list(da850_evm_nand_pins);
if (ret)
- pr_warning("da850_evm_init: nand mux setup failed: "
- "%d\n", ret);
+ pr_warn("%s: NAND mux setup failed: %d\n",
+ __func__, ret);
ret = davinci_cfg_reg_list(da850_evm_nor_pins);
if (ret)
- pr_warning("da850_evm_init: nor mux setup failed: %d\n",
- ret);
+ pr_warn("%s: NOR mux setup failed: %d\n",
+ __func__, ret);
da850_evm_init_nor();
@@ -477,19 +477,19 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
ret = gpio_request(sel_a, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_A]);
if (ret) {
- pr_warning("Cannot open UI expander pin %d\n", sel_a);
+ pr_warn("Cannot open UI expander pin %d\n", sel_a);
goto exp_setup_sela_fail;
}
ret = gpio_request(sel_b, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_B]);
if (ret) {
- pr_warning("Cannot open UI expander pin %d\n", sel_b);
+ pr_warn("Cannot open UI expander pin %d\n", sel_b);
goto exp_setup_selb_fail;
}
ret = gpio_request(sel_c, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_C]);
if (ret) {
- pr_warning("Cannot open UI expander pin %d\n", sel_c);
+ pr_warn("Cannot open UI expander pin %d\n", sel_c);
goto exp_setup_selc_fail;
}
@@ -501,7 +501,7 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
da850_evm_ui_keys_init(gpio);
ret = platform_device_register(&da850_evm_ui_keys_device);
if (ret) {
- pr_warning("Could not register UI GPIO expander push-buttons");
+ pr_warn("Could not register UI GPIO expander push-buttons");
goto exp_setup_keys_fail;
}
@@ -690,14 +690,14 @@ static int da850_evm_bb_expander_setup(struct i2c_client *client,
da850_evm_bb_keys_init(gpio);
ret = platform_device_register(&da850_evm_bb_keys_device);
if (ret) {
- pr_warning("Could not register baseboard GPIO expander keys");
+ pr_warn("Could not register baseboard GPIO expander keys");
goto io_exp_setup_sw_fail;
}
da850_evm_bb_leds_init(gpio);
ret = platform_device_register(&da850_evm_bb_leds_device);
if (ret) {
- pr_warning("Could not register baseboard GPIO expander LEDS");
+ pr_warn("Could not register baseboard GPIO expander LEDs");
goto io_exp_setup_leds_fail;
}
@@ -1065,21 +1065,19 @@ static int __init da850_evm_config_emac(void)
}
if (ret)
- pr_warning("da850_evm_init: cpgmac/rmii mux setup failed: %d\n",
- ret);
+ pr_warn("%s: CPGMAC/RMII mux setup failed: %d\n",
+ __func__, ret);
/* configure the CFGCHIP3 register for RMII or MII */
__raw_writel(val, cfg_chip3_base);
ret = davinci_cfg_reg(DA850_GPIO2_6);
if (ret)
- pr_warning("da850_evm_init:GPIO(2,6) mux setup "
- "failed\n");
+ pr_warn("%s:GPIO(2,6) mux setup failed\n", __func__);
ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en");
if (ret) {
- pr_warning("Cannot open GPIO %d\n",
- DA850_MII_MDIO_CLKEN_PIN);
+ pr_warn("Cannot open GPIO %d\n", DA850_MII_MDIO_CLKEN_PIN);
return ret;
}
@@ -1090,8 +1088,7 @@ static int __init da850_evm_config_emac(void)
ret = da8xx_register_emac();
if (ret)
- pr_warning("da850_evm_init: emac registration failed: %d\n",
- ret);
+ pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
return 0;
}
@@ -1443,57 +1440,53 @@ static __init void da850_evm_init(void)
ret = pmic_tps65070_init();
if (ret)
- pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n",
- ret);
+ pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret);
ret = da850_register_edma(da850_edma_rsv);
if (ret)
- pr_warning("da850_evm_init: edma registration failed: %d\n",
- ret);
+ pr_warn("%s: EDMA registration failed: %d\n", __func__, ret);
ret = davinci_cfg_reg_list(da850_i2c0_pins);
if (ret)
- pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n",
- ret);
+ pr_warn("%s: I2C0 mux setup failed: %d\n", __func__, ret);
ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata);
if (ret)
- pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
- ret);
+ pr_warn("%s: I2C0 registration failed: %d\n", __func__, ret);
ret = da8xx_register_watchdog();
if (ret)
- pr_warning("da830_evm_init: watchdog registration failed: %d\n",
- ret);
+ pr_warn("%s: watchdog registration failed: %d\n",
+ __func__, ret);
if (HAS_MMC) {
ret = davinci_cfg_reg_list(da850_evm_mmcsd0_pins);
if (ret)
- pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
- " %d\n", ret);
+ pr_warn("%s: MMCSD0 mux setup failed: %d\n",
+ __func__, ret);
ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
if (ret)
- pr_warning("da850_evm_init: can not open GPIO %d\n",
- DA850_MMCSD_CD_PIN);
+ pr_warn("%s: can not open GPIO %d\n",
+ __func__, DA850_MMCSD_CD_PIN);
gpio_direction_input(DA850_MMCSD_CD_PIN);
ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
if (ret)
- pr_warning("da850_evm_init: can not open GPIO %d\n",
- DA850_MMCSD_WP_PIN);
+ pr_warn("%s: can not open GPIO %d\n",
+ __func__, DA850_MMCSD_WP_PIN);
gpio_direction_input(DA850_MMCSD_WP_PIN);
ret = da8xx_register_mmcsd0(&da850_mmc_config);
if (ret)
- pr_warning("da850_evm_init: mmcsd0 registration failed:"
- " %d\n", ret);
+ pr_warn("%s: MMCSD0 registration failed: %d\n",
+ __func__, ret);
ret = da850_wl12xx_init();
if (ret)
- pr_warning("da850_evm_init: wl12xx initialization"
- " failed: %d\n", ret);
+ pr_warn("%s: WL12xx initialization failed: %d\n",
+ __func__, ret);
}
davinci_serial_init(&da850_evm_uart_config);
@@ -1511,16 +1504,14 @@ static __init void da850_evm_init(void)
ret = davinci_cfg_reg_list(da850_evm_mcasp_pins);
if (ret)
- pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
- ret);
+ pr_warn("%s: McASP mux setup failed: %d\n", __func__, ret);
da850_evm_snd_data.sram_pool = sram_get_gen_pool();
da8xx_register_mcasp(0, &da850_evm_snd_data);
ret = davinci_cfg_reg_list(da850_lcdcntl_pins);
if (ret)
- pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
- ret);
+ pr_warn("%s: LCDC mux setup failed: %d\n", __func__, ret);
ret = da8xx_register_uio_pruss();
if (ret)
@@ -1530,38 +1521,33 @@ static __init void da850_evm_init(void)
/* Handle board specific muxing for LCD here */
ret = davinci_cfg_reg_list(da850_evm_lcdc_pins);
if (ret)
- pr_warning("da850_evm_init: evm specific lcd mux setup "
- "failed: %d\n", ret);
+ pr_warn("%s: EVM specific LCD mux setup failed: %d\n",
+ __func__, ret);
ret = da850_lcd_hw_init();
if (ret)
- pr_warning("da850_evm_init: lcd initialization failed: %d\n",
- ret);
+ pr_warn("%s: LCD initialization failed: %d\n", __func__, ret);
sharp_lk043t1dg01_pdata.panel_power_ctrl = da850_panel_power_ctrl,
ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
if (ret)
- pr_warning("da850_evm_init: lcdc registration failed: %d\n",
- ret);
+ pr_warn("%s: LCDC registration failed: %d\n", __func__, ret);
ret = da8xx_register_rtc();
if (ret)
- pr_warning("da850_evm_init: rtc setup failed: %d\n", ret);
+ pr_warn("%s: RTC setup failed: %d\n", __func__, ret);
ret = da850_evm_init_cpufreq();
if (ret)
- pr_warning("da850_evm_init: cpufreq registration failed: %d\n",
- ret);
+ pr_warn("%s: cpufreq registration failed: %d\n", __func__, ret);
ret = da8xx_register_cpuidle();
if (ret)
- pr_warning("da850_evm_init: cpuidle registration failed: %d\n",
- ret);
+ pr_warn("%s: cpuidle registration failed: %d\n", __func__, ret);
ret = da850_register_pm(&da850_pm_device);
if (ret)
- pr_warning("da850_evm_init: suspend registration failed: %d\n",
- ret);
+ pr_warn("%s: suspend registration failed: %d\n", __func__, ret);
da850_vpif_init();
@@ -1573,13 +1559,11 @@ static __init void da850_evm_init(void)
ret = da8xx_register_spi_bus(1, ARRAY_SIZE(da850evm_spi_info));
if (ret)
- pr_warning("da850_evm_init: spi 1 registration failed: %d\n",
- ret);
+ pr_warn("%s: SPI 1 registration failed: %d\n", __func__, ret);
ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE);
if (ret)
- pr_warning("da850_evm_init: sata registration failed: %d\n",
- ret);
+ pr_warn("%s: SATA registration failed: %d\n", __func__, ret);
da850_evm_setup_mac_addr();
}
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index deb3922..5a2bd44 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -48,8 +48,7 @@ static __init void omapl138_hawk_config_emac(void)
val &= ~BIT(8);
ret = davinci_cfg_reg_list(omapl138_hawk_mii_pins);
if (ret) {
- pr_warning("%s: cpgmac/mii mux setup failed: %d\n",
- __func__, ret);
+ pr_warn("%s: CPGMAC/MII mux setup failed: %d\n", __func__, ret);
return;
}
@@ -61,8 +60,7 @@ static __init void omapl138_hawk_config_emac(void)
ret = da8xx_register_emac();
if (ret)
- pr_warning("%s: emac registration failed: %d\n",
- __func__, ret);
+ pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
}
/*
@@ -147,15 +145,14 @@ static __init void omapl138_hawk_mmc_init(void)
ret = davinci_cfg_reg_list(hawk_mmcsd0_pins);
if (ret) {
- pr_warning("%s: MMC/SD0 mux setup failed: %d\n",
- __func__, ret);
+ pr_warn("%s: MMC/SD0 mux setup failed: %d\n", __func__, ret);
return;
}
ret = gpio_request_one(DA850_HAWK_MMCSD_CD_PIN,
GPIOF_DIR_IN, "MMC CD");
if (ret < 0) {
- pr_warning("%s: can not open GPIO %d\n",
+ pr_warn("%s: can not open GPIO %d\n",
__func__, DA850_HAWK_MMCSD_CD_PIN);
return;
}
@@ -163,15 +160,14 @@ static __init void omapl138_hawk_mmc_init(void)
ret = gpio_request_one(DA850_HAWK_MMCSD_WP_PIN,
GPIOF_DIR_IN, "MMC WP");
if (ret < 0) {
- pr_warning("%s: can not open GPIO %d\n",
+ pr_warn("%s: can not open GPIO %d\n",
__func__, DA850_HAWK_MMCSD_WP_PIN);
goto mmc_setup_wp_fail;
}
ret = da8xx_register_mmcsd0(&da850_mmc_config);
if (ret) {
- pr_warning("%s: MMC/SD0 registration failed: %d\n",
- __func__, ret);
+ pr_warn("%s: MMC/SD0 registration failed: %d\n", __func__, ret);
goto mmc_setup_mmcsd_fail;
}
@@ -250,8 +246,7 @@ static __init void omapl138_hawk_usb_init(void)
ret = davinci_cfg_reg_list(da850_hawk_usb11_pins);
if (ret) {
- pr_warning("%s: USB 1.1 PinMux setup failed: %d\n",
- __func__, ret);
+ pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
return;
}
@@ -280,8 +275,7 @@ static __init void omapl138_hawk_usb_init(void)
ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata);
if (ret) {
- pr_warning("%s: USB 1.1 registration failed: %d\n",
- __func__, ret);
+ pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
goto usb11_setup_fail;
}
@@ -307,8 +301,7 @@ static __init void omapl138_hawk_init(void)
ret = da850_register_edma(da850_edma_rsv);
if (ret)
- pr_warning("%s: EDMA registration failed: %d\n",
- __func__, ret);
+ pr_warn("%s: EDMA registration failed: %d\n", __func__, ret);
omapl138_hawk_mmc_init();
@@ -316,9 +309,8 @@ static __init void omapl138_hawk_init(void)
ret = da8xx_register_watchdog();
if (ret)
- pr_warning("omapl138_hawk_init: "
- "watchdog registration failed: %d\n",
- ret);
+ pr_warn("%s: watchdog registration failed: %d\n",
+ __func__, ret);
}
#ifdef CONFIG_SERIAL_8250_CONSOLE
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 4695ca7..62a15e2 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -7,6 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -23,6 +24,8 @@
#include <linux/platform_data/keypad-omap.h>
#include <linux/platform_data/lcd-mipid.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/i2c-cbus-gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -212,6 +215,45 @@ static inline void nokia770_mmc_init(void)
}
#endif
+#if defined(CONFIG_I2C_CBUS_GPIO) || defined(CONFIG_I2C_CBUS_GPIO_MODULE)
+static struct i2c_cbus_platform_data nokia770_cbus_data = {
+ .clk_gpio = OMAP_MPUIO(9),
+ .dat_gpio = OMAP_MPUIO(10),
+ .sel_gpio = OMAP_MPUIO(11),
+};
+
+static struct platform_device nokia770_cbus_device = {
+ .name = "i2c-cbus-gpio",
+ .id = 2,
+ .dev = {
+ .platform_data = &nokia770_cbus_data,
+ },
+};
+
+static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = {
+ {
+ I2C_BOARD_INFO("retu-mfd", 0x01),
+ },
+};
+
+static void __init nokia770_cbus_init(void)
+{
+ const int retu_irq_gpio = 62;
+
+ if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ"))
+ return;
+ irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING);
+ nokia770_i2c_board_info_2[0].irq = gpio_to_irq(retu_irq_gpio);
+ i2c_register_board_info(2, nokia770_i2c_board_info_2,
+ ARRAY_SIZE(nokia770_i2c_board_info_2));
+ platform_device_register(&nokia770_cbus_device);
+}
+#else /* CONFIG_I2C_CBUS_GPIO */
+static void __init nokia770_cbus_init(void)
+{
+}
+#endif /* CONFIG_I2C_CBUS_GPIO */
+
static void __init omap_nokia770_init(void)
{
/* On Nokia 770, the SleepX signal is masked with an
@@ -233,6 +275,7 @@ static void __init omap_nokia770_init(void)
mipid_dev_init();
omap1_usb_init(&nokia770_usb_config);
nokia770_mmc_init();
+ nokia770_cbus_init();
}
MACHINE_START(NOKIA770, "Nokia 770")
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index c3c033f..22ad24e 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -188,12 +188,6 @@ config MACH_OMAP_H4
select OMAP_DEBUG_DEVICES
select OMAP_PACKAGE_ZAF
-config MACH_OMAP_APOLLON
- bool "OMAP 2420 Apollon board"
- depends on SOC_OMAP2420
- default y
- select OMAP_PACKAGE_ZAC
-
config MACH_OMAP_2430SDP
bool "OMAP 2430 SDP board"
depends on SOC_OMAP2430
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 65fb6fb..ff528df 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -223,7 +223,6 @@ endif
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o
-obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 15a3914..ce812de 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -25,6 +25,7 @@
#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/platform_data/omap-twl4030.h>
#include <linux/usb/phy.h>
#include <asm/mach-types.h>
@@ -210,6 +211,19 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
+static struct omap_tw4030_pdata omap_twl4030_audio_data = {
+ .voice_connected = true,
+ .custom_routing = true,
+
+ .has_hs = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
+ .has_hf = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
+
+ .has_mainmic = true,
+ .has_submic = true,
+ .has_hsmic = true,
+ .has_linein = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
+};
+
static int sdp3430_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
@@ -226,6 +240,9 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
/* gpio + 15 is "sub_lcd_nRST" (output) */
gpio_request_one(gpio + 15, GPIOF_OUT_INIT_LOW, "sub_lcd_nRST");
+ omap_twl4030_audio_data.jack_detect = gpio + 2;
+ omap_twl4030_audio_init("SDP3430", &omap_twl4030_audio_data);
+
return 0;
}
@@ -383,6 +400,9 @@ static int __init omap3430_i2c_init(void)
sdp3430_twldata.vpll2->constraints.apply_uV = true;
sdp3430_twldata.vpll2->constraints.name = "VDVI";
+ sdp3430_twldata.audio->codec->hs_extmute = 1;
+ sdp3430_twldata.audio->codec->hs_extmute_gpio = -EINVAL;
+
omap3_pmic_init("twl4030", &sdp3430_twldata);
/* i2c2 on camera connector (for sensor control) and optional isp1301 */
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 508e275..35f3ad0 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -24,8 +24,10 @@
#include <linux/gpio_keys.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
+#include <linux/pwm.h>
#include <linux/leds.h>
#include <linux/leds_pwm.h>
+#include <linux/pwm_backlight.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/omap4-keypad.h>
#include <linux/usb/musb.h>
@@ -257,10 +259,20 @@ static struct gpio_led_platform_data sdp4430_led_data = {
.num_leds = ARRAY_SIZE(sdp4430_gpio_leds),
};
+static struct pwm_lookup sdp4430_pwm_lookup[] = {
+ PWM_LOOKUP("twl-pwm", 0, "leds_pwm", "omap4::keypad"),
+ PWM_LOOKUP("twl-pwm", 1, "pwm-backlight", NULL),
+ PWM_LOOKUP("twl-pwmled", 0, "leds_pwm", "omap4:green:chrg"),
+};
+
static struct led_pwm sdp4430_pwm_leds[] = {
{
+ .name = "omap4::keypad",
+ .max_brightness = 127,
+ .pwm_period_ns = 7812500,
+ },
+ {
.name = "omap4:green:chrg",
- .pwm_id = 1,
.max_brightness = 255,
.pwm_period_ns = 7812500,
},
@@ -279,6 +291,20 @@ static struct platform_device sdp4430_leds_pwm = {
},
};
+static struct platform_pwm_backlight_data sdp4430_backlight_data = {
+ .max_brightness = 127,
+ .dft_brightness = 127,
+ .pwm_period_ns = 7812500,
+};
+
+static struct platform_device sdp4430_backlight_pwm = {
+ .name = "pwm-backlight",
+ .id = -1,
+ .dev = {
+ .platform_data = &sdp4430_backlight_data,
+ },
+};
+
static int omap_prox_activate(struct device *dev)
{
gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 1);
@@ -413,6 +439,7 @@ static struct platform_device *sdp4430_devices[] __initdata = {
&sdp4430_gpio_keys_device,
&sdp4430_leds_gpio,
&sdp4430_leds_pwm,
+ &sdp4430_backlight_pwm,
&sdp4430_vbat,
&sdp4430_dmic_codec,
&sdp4430_abe_audio,
@@ -709,6 +736,7 @@ static void __init omap_4430sdp_init(void)
ARRAY_SIZE(sdp4430_spi_board_info));
}
+ pwm_add_table(sdp4430_pwm_lookup, ARRAY_SIZE(sdp4430_pwm_lookup));
status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data);
if (status)
pr_err("Keypad initialization failed: %d\n", status);
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 52cc2c5..7d3358b 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -20,12 +20,18 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/mfd/tps65910.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
+#include "common-board-devices.h"
+#include "board-flash.h"
#include "am35xx-emac.h"
#include "mux.h"
@@ -36,6 +42,7 @@
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
+ OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#endif
@@ -51,6 +58,54 @@ static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.reset_gpio_port[2] = -EINVAL
};
+static struct mtd_partition crane_nand_partitions[] = {
+ {
+ .name = "X-Loader",
+ .offset = 0,
+ .size = 4 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "U-Boot",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 14 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "U-Boot Env",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 2 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 40 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "File System",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct tps65910_board tps65910_pdata = {
+ .irq = 7 + OMAP_INTC_START,
+ .en_ck32k_xtal = true,
+};
+
+static struct i2c_board_info __initdata tps65910_board_info[] = {
+ {
+ I2C_BOARD_INFO("tps65910", 0x2d),
+ .platform_data = &tps65910_pdata,
+ },
+};
+
+static void __init am3517_crane_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 2600, tps65910_board_info,
+ ARRAY_SIZE(tps65910_board_info));
+}
+
static void __init am3517_crane_init(void)
{
int ret;
@@ -58,6 +113,10 @@ static void __init am3517_crane_init(void)
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
omap_sdrc_init(NULL, NULL);
+ board_nand_init(crane_nand_partitions,
+ ARRAY_SIZE(crane_nand_partitions), 0,
+ NAND_BUSWIDTH_16, NULL);
+ am3517_crane_i2c_init();
/* Configure GPIO for EHCI port */
if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) {
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
deleted file mode 100644
index 3a6ca74..0000000
--- a/arch/arm/mach-omap2/board-apollon.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-apollon.c
- *
- * Copyright (C) 2005,2006 Samsung Electronics
- * Author: Kyungmin Park <kyungmin.park@samsung.com>
- *
- * Modified from mach-omap/omap2/board-h4.c
- *
- * Code for apollon OMAP2 board. Should work on many OMAP2 systems where
- * the bootloader passes the board-specific data to the kernel.
- * Do not put any board specific code to this file; create a new machine
- * type if you need custom low-level initializations.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/onenand.h>
-#include <linux/delay.h>
-#include <linux/leds.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/smc91x.h>
-#include <linux/gpio.h>
-#include <linux/platform_data/leds-omap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include "common.h"
-#include "gpmc.h"
-
-#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
-
-#include "mux.h"
-#include "control.h"
-
-/* LED & Switch macros */
-#define LED0_GPIO13 13
-#define LED1_GPIO14 14
-#define LED2_GPIO15 15
-#define SW_ENTER_GPIO16 16
-#define SW_UP_GPIO17 17
-#define SW_DOWN_GPIO58 58
-
-#define APOLLON_FLASH_CS 0
-#define APOLLON_ETH_CS 1
-#define APOLLON_ETHR_GPIO_IRQ 74
-
-static struct mtd_partition apollon_partitions[] = {
- {
- .name = "X-Loader + U-Boot",
- .offset = 0,
- .size = SZ_128K,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "params",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_128K,
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M,
- },
- {
- .name = "rootfs",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_16M,
- },
- {
- .name = "filesystem00",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_32M,
- },
- {
- .name = "filesystem01",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct onenand_platform_data apollon_flash_data = {
- .parts = apollon_partitions,
- .nr_parts = ARRAY_SIZE(apollon_partitions),
-};
-
-static struct resource apollon_flash_resource[] = {
- [0] = {
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device apollon_onenand_device = {
- .name = "onenand-flash",
- .id = -1,
- .dev = {
- .platform_data = &apollon_flash_data,
- },
- .num_resources = ARRAY_SIZE(apollon_flash_resource),
- .resource = apollon_flash_resource,
-};
-
-static void __init apollon_flash_init(void)
-{
- unsigned long base;
-
- if (gpmc_cs_request(APOLLON_FLASH_CS, SZ_128K, &base) < 0) {
- printk(KERN_ERR "Cannot request OneNAND GPMC CS\n");
- return;
- }
- apollon_flash_resource[0].start = base;
- apollon_flash_resource[0].end = base + SZ_128K - 1;
-}
-
-static struct smc91x_platdata appolon_smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
- .leda = RPC_LED_100_10,
- .ledb = RPC_LED_TX_RX,
-};
-
-static struct resource apollon_smc91x_resources[] = {
- [0] = {
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- },
-};
-
-static struct platform_device apollon_smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .dev = {
- .platform_data = &appolon_smc91x_info,
- },
- .num_resources = ARRAY_SIZE(apollon_smc91x_resources),
- .resource = apollon_smc91x_resources,
-};
-
-static struct omap_led_config apollon_led_config[] = {
- {
- .cdev = {
- .name = "apollon:led0",
- },
- .gpio = LED0_GPIO13,
- },
- {
- .cdev = {
- .name = "apollon:led1",
- },
- .gpio = LED1_GPIO14,
- },
- {
- .cdev = {
- .name = "apollon:led2",
- },
- .gpio = LED2_GPIO15,
- },
-};
-
-static struct omap_led_platform_data apollon_led_data = {
- .nr_leds = ARRAY_SIZE(apollon_led_config),
- .leds = apollon_led_config,
-};
-
-static struct platform_device apollon_led_device = {
- .name = "omap-led",
- .id = -1,
- .dev = {
- .platform_data = &apollon_led_data,
- },
-};
-
-static struct platform_device *apollon_devices[] __initdata = {
- &apollon_onenand_device,
- &apollon_smc91x_device,
- &apollon_led_device,
-};
-
-static inline void __init apollon_init_smc91x(void)
-{
- unsigned long base;
-
- unsigned int rate;
- struct clk *gpmc_fck;
- int eth_cs;
- int err;
-
- gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */
- if (IS_ERR(gpmc_fck)) {
- WARN_ON(1);
- return;
- }
-
- clk_prepare_enable(gpmc_fck);
- rate = clk_get_rate(gpmc_fck);
-
- eth_cs = APOLLON_ETH_CS;
-
- /* Make sure CS1 timings are correct */
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
-
- if (rate >= 160000000) {
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
- } else if (rate >= 130000000) {
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
- } else {/* rate = 100000000 */
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
- }
-
- if (gpmc_cs_request(APOLLON_ETH_CS, SZ_16M, &base) < 0) {
- printk(KERN_ERR "Failed to request GPMC CS for smc91x\n");
- goto out;
- }
- apollon_smc91x_resources[0].start = base + 0x300;
- apollon_smc91x_resources[0].end = base + 0x30f;
- udelay(100);
-
- omap_mux_init_gpio(APOLLON_ETHR_GPIO_IRQ, 0);
- err = gpio_request_one(APOLLON_ETHR_GPIO_IRQ, GPIOF_IN, "SMC91x irq");
- if (err) {
- printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
- APOLLON_ETHR_GPIO_IRQ);
- gpmc_cs_free(APOLLON_ETH_CS);
- }
-out:
- clk_disable_unprepare(gpmc_fck);
- clk_put(gpmc_fck);
-}
-
-static struct panel_generic_dpi_data apollon_panel_data = {
- .name = "apollon",
-};
-
-static struct omap_dss_device apollon_lcd_device = {
- .name = "lcd",
- .driver_name = "generic_dpi_panel",
- .type = OMAP_DISPLAY_TYPE_DPI,
- .phy.dpi.data_lines = 18,
- .data = &apollon_panel_data,
-};
-
-static struct omap_dss_device *apollon_dss_devices[] = {
- &apollon_lcd_device,
-};
-
-static struct omap_dss_board_info apollon_dss_data = {
- .num_devices = ARRAY_SIZE(apollon_dss_devices),
- .devices = apollon_dss_devices,
- .default_device = &apollon_lcd_device,
-};
-
-static struct gpio apollon_gpio_leds[] __initdata = {
- { LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */
- { LED1_GPIO14, GPIOF_OUT_INIT_LOW, "LED1" }, /* LED1 - AA6 */
- { LED2_GPIO15, GPIOF_OUT_INIT_LOW, "LED2" }, /* LED2 - AA4 */
-};
-
-static void __init apollon_led_init(void)
-{
- omap_mux_init_signal("vlynq_clk.gpio_13", 0);
- omap_mux_init_signal("vlynq_rx1.gpio_14", 0);
- omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
-
- gpio_request_array(apollon_gpio_leds, ARRAY_SIZE(apollon_gpio_leds));
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
- { .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static void __init omap_apollon_init(void)
-{
- u32 v;
-
- omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
-
- apollon_init_smc91x();
- apollon_led_init();
- apollon_flash_init();
-
- /* REVISIT: where's the correct place */
- omap_mux_init_signal("sys_nirq", OMAP_PULL_ENA | OMAP_PULL_UP);
-
- /* LCD PWR_EN */
- omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
-
- /* Use Internal loop-back in MMC/SDIO Module Input Clock selection */
- v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- v |= (1 << 24);
- omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
-
- /*
- * Make sure the serial ports are muxed on at this point.
- * You have to mux them off in device drivers later on
- * if not needed.
- */
- apollon_smc91x_resources[1].start = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ);
- apollon_smc91x_resources[1].end = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ);
- platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
- omap_serial_init();
- omap_sdrc_init(NULL, NULL);
- omap_display_init(&apollon_dss_data);
-}
-
-MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
- /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
- .atag_offset = 0x100,
- .reserve = omap_reserve,
- .map_io = omap242x_map_io,
- .init_early = omap2420_init_early,
- .init_irq = omap2_init_irq,
- .handle_irq = omap2_intc_handle_irq,
- .init_machine = omap_apollon_init,
- .init_late = omap2420_init_late,
- .init_time = omap2_sync32k_timer_init,
- .restart = omap2xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 10054e3..af2bb21 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -723,7 +723,7 @@ static void __init cm_t3x_common_init(void)
cm_t35_init_ethernet();
cm_t35_init_led();
cm_t35_init_display();
- omap_twl4030_audio_init("cm-t3x");
+ omap_twl4030_audio_init("cm-t3x", NULL);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 5e54f56..a66da80 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -32,6 +32,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/mmc/host.h>
#include <linux/can/platform/ti_hecc.h>
#include <asm/mach-types.h>
@@ -46,6 +47,7 @@
#include "mux.h"
#include "control.h"
+#include "hsmmc.h"
#include "common-board-devices.h"
#include "am35xx-emac.h"
#include "gpmc-nand.h"
@@ -121,6 +123,26 @@ static void cm_t3517_init_hecc(void)
static inline void cm_t3517_init_hecc(void) {}
#endif
+#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+static struct omap2_hsmmc_info cm_t3517_mmc[] = {
+ {
+ .mmc = 1,
+ .caps = MMC_CAP_4_BIT_DATA,
+ .gpio_cd = 144,
+ .gpio_wp = 59,
+ },
+ {
+ .mmc = 2,
+ .caps = MMC_CAP_4_BIT_DATA,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ },
+ {} /* Terminator */
+};
+#else
+#define cm_t3517_mmc NULL
+#endif
+
#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
#define RTC_IO_GPIO (153)
#define RTC_WR_GPIO (154)
@@ -271,6 +293,10 @@ static struct omap_board_mux board_mux[] __initdata = {
/* CM-T3517 USB HUB nRESET */
OMAP3_MUX(MCBSP4_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+ /* CD - GPIO144 and WP - GPIO59 for MMC1 - SB-T35 */
+ OMAP3_MUX(UART2_CTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+ OMAP3_MUX(GPMC_CLK, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#endif
@@ -286,6 +312,7 @@ static void __init cm_t3517_init(void)
cm_t3517_init_usbh();
cm_t3517_init_hecc();
am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
+ omap_hsmmc_init(cm_t3517_mmc);
}
MACHINE_START(CM_T3517, "Compulab CM-T3517")
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 4dadb0b..53056c3 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -629,7 +629,7 @@ static void __init devkit8000_init(void)
board_nand_init(devkit8000_nand_partitions,
ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS,
NAND_BUSWIDTH_16, NULL);
- omap_twl4030_audio_init("omap3beagle");
+ omap_twl4030_audio_init("omap3beagle", NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index c10738a..bf92678 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -301,20 +301,20 @@ static struct omap2_hsmmc_info mmc[] = {
static struct gpio_led igep_gpio_leds[] = {
[0] = {
- .name = "gpio-led:red:d0",
- .default_trigger = "default-off"
+ .name = "omap3:red:user0",
+ .default_state = 0,
},
[1] = {
- .name = "gpio-led:green:d0",
- .default_trigger = "default-off",
+ .name = "omap3:green:boot",
+ .default_state = 1,
},
[2] = {
- .name = "gpio-led:red:d1",
- .default_trigger = "default-off",
+ .name = "omap3:red:user1",
+ .default_state = 0,
},
[3] = {
- .name = "gpio-led:green:d1",
- .default_trigger = "heartbeat",
+ .name = "omap3:green:user1",
+ .default_state = 0,
.gpio = -EINVAL, /* gets replaced */
.active_low = 1,
},
@@ -631,7 +631,7 @@ static void __init igep_init(void)
igep_flash_init();
igep_leds_init();
- omap_twl4030_audio_init("igep2");
+ omap_twl4030_audio_init("igep2", NULL);
/*
* WLAN-BT combo module from MuRata which has a Marvell WLAN
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 70bc1fc..c3558f9 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -20,6 +20,8 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/leds.h>
+#include <linux/pwm.h>
+#include <linux/leds_pwm.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
@@ -56,6 +58,32 @@
#define NAND_CS 0
+static struct pwm_lookup pwm_lookup[] = {
+ /* LEDB -> PMU_STAT */
+ PWM_LOOKUP("twl-pwmled", 1, "leds_pwm", "beagleboard::pmu_stat"),
+};
+
+static struct led_pwm pwm_leds[] = {
+ {
+ .name = "beagleboard::pmu_stat",
+ .max_brightness = 127,
+ .pwm_period_ns = 7812500,
+ },
+};
+
+static struct led_pwm_platform_data pwm_data = {
+ .num_leds = ARRAY_SIZE(pwm_leds),
+ .leds = pwm_leds,
+};
+
+static struct platform_device leds_pwm = {
+ .name = "leds_pwm",
+ .id = -1,
+ .dev = {
+ .platform_data = &pwm_data,
+ },
+};
+
/*
* OMAP3 Beagle revision
* Run time detection of Beagle revision is done by reading GPIO.
@@ -293,9 +321,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
"nEN_USB_PWR");
- /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
- gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-
return 0;
}
@@ -377,11 +402,6 @@ static struct gpio_led gpio_leds[] = {
.default_trigger = "mmc0",
.gpio = 149,
},
- {
- .name = "beagleboard::pmu_stat",
- .gpio = -EINVAL, /* gets replaced */
- .active_low = true,
- },
};
static struct gpio_led_platform_data gpio_led_info = {
@@ -429,6 +449,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = {
&leds_gpio,
&keys_gpio,
&madc_hwmon,
+ &leds_pwm,
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
@@ -526,7 +547,7 @@ static void __init omap3_beagle_init(void)
board_nand_init(omap3beagle_nand_partitions,
ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
NAND_BUSWIDTH_16, NULL);
- omap_twl4030_audio_init("omap3beagle");
+ omap_twl4030_audio_init("omap3beagle", NULL);
/* Ensure msecure is mux'd to be able to set the RTC. */
omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
@@ -534,6 +555,8 @@ static void __init omap3_beagle_init(void)
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
+
+ pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
}
MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 8258a78..48789e0 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -746,7 +746,7 @@ static void __init omap3_evm_init(void)
omap3evm_init_smsc911x();
omap3_evm_display_init();
omap3_evm_wl12xx_init();
- omap_twl4030_audio_init("omap3evm");
+ omap_twl4030_audio_init("omap3evm", NULL);
}
MACHINE_START(OMAP3EVM, "OMAP3 EVM")
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 1bcf396..86bab51 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -508,7 +508,7 @@ static void __init overo_init(void)
overo_display_init();
overo_init_led();
overo_init_keys();
- omap_twl4030_audio_init("overo");
+ omap_twl4030_audio_init("overo", NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index f3d075b..c26d441 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -162,30 +162,39 @@ static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
static struct lp5523_led_config rx51_lp5523_led_config[] = {
{
+ .name = "lp5523:kb1",
.chan_nr = 0,
.led_current = 50,
}, {
+ .name = "lp5523:kb2",
.chan_nr = 1,
.led_current = 50,
}, {
+ .name = "lp5523:kb3",
.chan_nr = 2,
.led_current = 50,
}, {
+ .name = "lp5523:kb4",
.chan_nr = 3,
.led_current = 50,
}, {
+ .name = "lp5523:b",
.chan_nr = 4,
.led_current = 50,
}, {
+ .name = "lp5523:g",
.chan_nr = 5,
.led_current = 50,
}, {
+ .name = "lp5523:r",
.chan_nr = 6,
.led_current = 50,
}, {
+ .name = "lp5523:kb5",
.chan_nr = 7,
.led_current = 50,
}, {
+ .name = "lp5523:kb6",
.chan_nr = 8,
.led_current = 50,
}
@@ -1253,6 +1262,16 @@ static void __init rx51_init_lirc(void)
}
#endif
+static struct platform_device madc_hwmon = {
+ .name = "twl4030_madc_hwmon",
+ .id = -1,
+};
+
+static void __init rx51_init_twl4030_hwmon(void)
+{
+ platform_device_register(&madc_hwmon);
+}
+
void __init rx51_peripherals_init(void)
{
rx51_i2c_init();
@@ -1272,5 +1291,6 @@ void __init rx51_peripherals_init(void)
omap_hsmmc_init(mmc);
rx51_charger_init();
+ rx51_init_twl4030_hwmon();
}
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index dc5498b..cdc0c10 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -20,6 +20,7 @@
#include <linux/wl12xx.h>
#include <linux/mmc/host.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/omap-twl4030.h>
#include <linux/usb/phy.h>
#include <asm/mach-types.h>
@@ -35,11 +36,9 @@
#include "common-board-devices.h"
#define OMAP_ZOOM_WLAN_PMENA_GPIO (101)
-#define ZOOM2_HEADSET_EXTMUTE_GPIO (153)
+#define OMAP_ZOOM_TSC2004_IRQ_GPIO (153)
#define OMAP_ZOOM_WLAN_IRQ_GPIO (162)
-#define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES)
-
/* Zoom2 has Qwerty keyboard*/
static uint32_t board_keymap[] = {
KEY(0, 0, KEY_E),
@@ -227,22 +226,31 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
+static struct omap_tw4030_pdata omap_twl4030_audio_data = {
+ .voice_connected = true,
+ .custom_routing = true,
+
+ .has_hs = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
+ .has_hf = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
+
+ .has_mainmic = true,
+ .has_submic = true,
+ .has_hsmic = true,
+ .has_linein = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
+};
+
static int zoom_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
- int ret;
-
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
omap_hsmmc_late_init(mmc);
- ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
- "lcd enable");
- if (ret)
- pr_err("Failed to get LCD_PANEL_ENABLE_GPIO (gpio%d).\n",
- LCD_PANEL_ENABLE_GPIO);
+ /* Audio setup */
+ omap_twl4030_audio_data.jack_detect = gpio + 2;
+ omap_twl4030_audio_init("Zoom2", &omap_twl4030_audio_data);
- return ret;
+ return 0;
}
static struct twl4030_gpio_platform_data zoom_gpio_data = {
@@ -265,14 +273,9 @@ static int __init omap_i2c_init(void)
TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
- if (machine_is_omap_zoom2()) {
- struct twl4030_codec_data *codec_data;
- codec_data = zoom_twldata.audio->codec;
+ if (machine_is_omap_zoom2())
+ zoom_twldata.audio->codec->ramp_delay_value = 3; /* 161 ms */
- codec_data->ramp_delay_value = 3; /* 161 ms */
- codec_data->hs_extmute = 1;
- codec_data->hs_extmute_gpio = ZOOM2_HEADSET_EXTMUTE_GPIO;
- }
omap_pmic_init(1, 2400, "twl5030", 7 + OMAP_INTC_START, &zoom_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 8d70bd0..e4b16c8 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -790,9 +790,6 @@ static int gpmc_mem_init(void)
* even if we didn't boot from ROM.
*/
boot_rom_space = BOOT_ROM_SPACE;
- /* In apollon the CS0 is mapped as 0x0000 0000 */
- if (machine_is_omap_apollon())
- boot_rom_space = 0;
gpmc_mem_root.start = GPMC_MEM_START + boot_rom_space;
gpmc_mem_root.end = GPMC_MEM_END;
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 6a7aec6..51e138c 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -529,24 +529,29 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
defined(CONFIG_SND_OMAP_SOC_OMAP_TWL4030_MODULE)
#include <linux/platform_data/omap-twl4030.h>
+/* Commonly used configuration */
static struct omap_tw4030_pdata omap_twl4030_audio_data;
static struct platform_device audio_device = {
.name = "omap-twl4030",
.id = -1,
- .dev = {
- .platform_data = &omap_twl4030_audio_data,
- },
};
-void __init omap_twl4030_audio_init(char *card_name)
+void omap_twl4030_audio_init(char *card_name,
+ struct omap_tw4030_pdata *pdata)
{
- omap_twl4030_audio_data.card_name = card_name;
+ if (!pdata)
+ pdata = &omap_twl4030_audio_data;
+
+ pdata->card_name = card_name;
+
+ audio_device.dev.platform_data = pdata;
platform_device_register(&audio_device);
}
#else /* SOC_OMAP_TWL4030 */
-void __init omap_twl4030_audio_init(char *card_name)
+void omap_twl4030_audio_init(char *card_name,
+ struct omap_tw4030_pdata *pdata)
{
return;
}
diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h
index dcfbad5..24b65d0 100644
--- a/arch/arm/mach-omap2/twl-common.h
+++ b/arch/arm/mach-omap2/twl-common.h
@@ -32,6 +32,7 @@
struct twl4030_platform_data;
struct twl6040_platform_data;
+struct omap_tw4030_pdata;
struct i2c_board_info;
void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
@@ -60,6 +61,6 @@ void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
void omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
u32 pdata_flags, u32 regulators_flags);
-void omap_twl4030_audio_init(char *card_name);
+void omap_twl4030_audio_init(char *card_name, struct omap_tw4030_pdata *pdata);
#endif /* __OMAP_PMIC_COMMON__ */
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index a29849d..d82a50b 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -167,7 +167,7 @@ static unsigned long centro685_pin_config[] __initdata = {
/******************************************************************************
* GPIO keyboard
******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_PXA27x)
static unsigned int treo680_matrix_keys[] = {
KEY(0, 0, KEY_F8), /* Red/Off/Power */
KEY(0, 1, KEY_LEFT),
@@ -315,7 +315,7 @@ static inline void palmtreo_kpc_init(void) {}
/******************************************************************************
* USB host
******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_OHCI_HCD)
static struct pxaohci_platform_data treo680_ohci_info = {
.port_mode = PMM_PERPORT_MODE,
.flags = ENABLE_PORT1 | ENABLE_PORT3,
@@ -397,6 +397,36 @@ static void __init palmtreo_leds_init(void)
}
/******************************************************************************
+ * diskonchip docg4 flash
+ ******************************************************************************/
+#if defined(CONFIG_MACH_TREO680)
+/* REVISIT: does the centro have this device also? */
+#if IS_ENABLED(CONFIG_MTD_NAND_DOCG4)
+static struct resource docg4_resources[] = {
+ {
+ .start = 0x00000000,
+ .end = 0x00001FFF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device treo680_docg4_flash = {
+ .name = "docg4",
+ .id = -1,
+ .resource = docg4_resources,
+ .num_resources = ARRAY_SIZE(docg4_resources),
+};
+
+static void __init treo680_docg4_flash_init(void)
+{
+ platform_device_register(&treo680_docg4_flash);
+}
+#else
+static inline void treo680_docg4_flash_init(void) {}
+#endif
+#endif
+
+/******************************************************************************
* Machine init
******************************************************************************/
static void __init treo_reserve(void)
@@ -480,6 +510,7 @@ static void __init treo680_init(void)
treo680_gpio_init();
palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY,
GPIO_NR_TREO680_SD_POWER, 0);
+ treo680_docg4_flash_init();
}
#endif
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 69985b06..3203a9f 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -238,6 +238,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
+ INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
};
#ifdef CONFIG_PM
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 705bc63..8ff53a1 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -479,11 +479,10 @@ static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
static int power_gpio = -EINVAL;
if (power_gpio < 0) {
- int ret = gpio_request(GPIO_PORT114, "sdhi1_power");
- if (!ret) {
+ int ret = gpio_request_one(GPIO_PORT114, GPIOF_OUT_INIT_LOW,
+ "sdhi1_power");
+ if (!ret)
power_gpio = GPIO_PORT114;
- gpio_direction_output(power_gpio, 0);
- }
}
/*
@@ -604,14 +603,11 @@ static void __init ag5evm_init(void)
gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
- gpio_request(GPIO_PORT208, NULL); /* Reset */
- gpio_direction_output(GPIO_PORT208, 1);
+ gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
/* enable SMSC911X */
- gpio_request(GPIO_PORT144, NULL); /* PINTA2 */
- gpio_direction_input(GPIO_PORT144);
- gpio_request(GPIO_PORT145, NULL); /* RESET */
- gpio_direction_output(GPIO_PORT145, 1);
+ gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */
+ gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
/* FSI A */
gpio_request(GPIO_FN_FSIACK, NULL);
@@ -626,15 +622,13 @@ static void __init ag5evm_init(void)
gpio_request(GPIO_FN_PORT243_IRDA_FIRSEL, NULL);
/* LCD panel */
- gpio_request(GPIO_PORT217, NULL); /* RESET */
- gpio_direction_output(GPIO_PORT217, 0);
+ gpio_request_one(GPIO_PORT217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
mdelay(1);
gpio_set_value(GPIO_PORT217, 1);
mdelay(100);
/* LCD backlight controller */
- gpio_request(GPIO_PORT235, NULL); /* RESET */
- gpio_direction_output(GPIO_PORT235, 0);
+ gpio_request_one(GPIO_PORT235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
lcd_backlight_set_brightness(0);
/* enable SDHI0 on CN15 [SD I/F] */
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 2928cd6..38f1259 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -143,6 +143,10 @@
*
* SW41 : ON : SH-Mobile AP4 Audio Mode
* : OFF : Bluetooth Audio Mode
+ *
+ * it needs amixer settings for playing
+ *
+ * amixer set "Headphone Enable" on
*/
/*
@@ -1036,9 +1040,7 @@ static int ts_get_pendown_state(void)
gpio_free(GPIO_TSC_IRQ);
- gpio_request(GPIO_TSC_PORT, NULL);
-
- gpio_direction_input(GPIO_TSC_PORT);
+ gpio_request_one(GPIO_TSC_PORT, GPIOF_IN, NULL);
val = gpio_get_value(GPIO_TSC_PORT);
@@ -1119,18 +1121,10 @@ static void __init ap4evb_init(void)
gpio_request(GPIO_FN_IRQ6_39, NULL);
/* enable Debug switch (S6) */
- gpio_request(GPIO_PORT32, NULL);
- gpio_request(GPIO_PORT33, NULL);
- gpio_request(GPIO_PORT34, NULL);
- gpio_request(GPIO_PORT35, NULL);
- gpio_direction_input(GPIO_PORT32);
- gpio_direction_input(GPIO_PORT33);
- gpio_direction_input(GPIO_PORT34);
- gpio_direction_input(GPIO_PORT35);
- gpio_export(GPIO_PORT32, 0);
- gpio_export(GPIO_PORT33, 0);
- gpio_export(GPIO_PORT34, 0);
- gpio_export(GPIO_PORT35, 0);
+ gpio_request_one(GPIO_PORT32, GPIOF_IN | GPIOF_EXPORT, NULL);
+ gpio_request_one(GPIO_PORT33, GPIOF_IN | GPIOF_EXPORT, NULL);
+ gpio_request_one(GPIO_PORT34, GPIOF_IN | GPIOF_EXPORT, NULL);
+ gpio_request_one(GPIO_PORT35, GPIOF_IN | GPIOF_EXPORT, NULL);
/* SDHI0 */
gpio_request(GPIO_FN_SDHICD0, NULL);
@@ -1178,8 +1172,7 @@ static void __init ap4evb_init(void)
gpio_request(GPIO_FN_FSIAILR, NULL);
gpio_request(GPIO_FN_FSIAISLD, NULL);
gpio_request(GPIO_FN_FSIAOSLD, NULL);
- gpio_request(GPIO_PORT161, NULL);
- gpio_direction_output(GPIO_PORT161, 0); /* slave */
+ gpio_request_one(GPIO_PORT161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
gpio_request(GPIO_PORT9, NULL);
gpio_request(GPIO_PORT10, NULL);
@@ -1187,8 +1180,7 @@ static void __init ap4evb_init(void)
gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */
/* card detect pin for MMC slot (CN7) */
- gpio_request(GPIO_PORT41, NULL);
- gpio_direction_input(GPIO_PORT41);
+ gpio_request_one(GPIO_PORT41, GPIOF_IN, NULL);
/* setup FSI2 port B (HDMI) */
gpio_request(GPIO_FN_FSIBCK, NULL);
@@ -1276,11 +1268,8 @@ static void __init ap4evb_init(void)
gpio_request(GPIO_FN_LCDDISP, NULL);
gpio_request(GPIO_FN_LCDDCK, NULL);
- gpio_request(GPIO_PORT189, NULL); /* backlight */
- gpio_direction_output(GPIO_PORT189, 1);
-
- gpio_request(GPIO_PORT151, NULL); /* LCDDON */
- gpio_direction_output(GPIO_PORT151, 1);
+ gpio_request_one(GPIO_PORT189, GPIOF_OUT_INIT_HIGH, NULL); /* backlight */
+ gpio_request_one(GPIO_PORT151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
lcdc_info.clock_source = LCDC_CLK_BUS;
lcdc_info.ch[0].interface_type = RGB18;
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 81d91fd..f2ec077 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -124,6 +124,14 @@
* this command is required when playback.
*
* # amixer set "Headphone" 50
+ *
+ * this command is required when capture.
+ *
+ * # amixer set "Input PGA" 15
+ * # amixer set "Left Input Mixer MicP" on
+ * # amixer set "Left Input Mixer MicN" on
+ * # amixer set "Right Input Mixer MicN" on
+ * # amixer set "Right Input Mixer MicP" on
*/
/*
@@ -700,9 +708,9 @@ static int mt9t111_power(struct device *dev, int mode)
/* video1 (= CON1 camera) expect 24MHz */
clk_set_rate(mclk, clk_round_rate(mclk, 24000000));
clk_enable(mclk);
- gpio_direction_output(GPIO_PORT158, 1);
+ gpio_set_value(GPIO_PORT158, 1);
} else {
- gpio_direction_output(GPIO_PORT158, 0);
+ gpio_set_value(GPIO_PORT158, 0);
clk_disable(mclk);
}
@@ -992,16 +1000,12 @@ static void __init eva_init(void)
gpio_request(GPIO_FN_LCD0_DISP, NULL);
gpio_request(GPIO_FN_LCD0_LCLK_PORT165, NULL);
- gpio_request(GPIO_PORT61, NULL); /* LCDDON */
- gpio_direction_output(GPIO_PORT61, 1);
-
- gpio_request(GPIO_PORT202, NULL); /* LCD0_LED_CONT */
- gpio_direction_output(GPIO_PORT202, 0);
+ gpio_request_one(GPIO_PORT61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
+ gpio_request_one(GPIO_PORT202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */
/* Touchscreen */
gpio_request(GPIO_FN_IRQ10, NULL); /* TP_INT */
- gpio_request(GPIO_PORT166, NULL); /* TP_RST_B */
- gpio_direction_output(GPIO_PORT166, 1);
+ gpio_request_one(GPIO_PORT166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
/* GETHER */
gpio_request(GPIO_FN_ET_CRS, NULL);
@@ -1024,12 +1028,10 @@ static void __init eva_init(void)
gpio_request(GPIO_FN_ET_RX_DV, NULL);
gpio_request(GPIO_FN_ET_RX_CLK, NULL);
- gpio_request(GPIO_PORT18, NULL); /* PHY_RST */
- gpio_direction_output(GPIO_PORT18, 1);
+ gpio_request_one(GPIO_PORT18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */
/* USB */
- gpio_request(GPIO_PORT159, NULL); /* USB_DEVICE_MODE */
- gpio_direction_input(GPIO_PORT159);
+ gpio_request_one(GPIO_PORT159, GPIOF_IN, NULL); /* USB_DEVICE_MODE */
if (gpio_get_value(GPIO_PORT159)) {
/* USB Host */
@@ -1043,8 +1045,7 @@ static void __init eva_init(void)
* and select GPIO_PORT209 here
*/
gpio_request(GPIO_FN_IRQ7_PORT209, NULL);
- gpio_request(GPIO_PORT209, NULL);
- gpio_direction_input(GPIO_PORT209);
+ gpio_request_one(GPIO_PORT209, GPIOF_IN, NULL);
platform_device_register(&usbhsf_device);
usb = &usbhsf_device;
@@ -1059,12 +1060,9 @@ static void __init eva_init(void)
gpio_request(GPIO_FN_SDHI0_D3, NULL);
gpio_request(GPIO_FN_SDHI0_WP, NULL);
- gpio_request(GPIO_PORT17, NULL); /* SDHI0_18/33_B */
- gpio_request(GPIO_PORT74, NULL); /* SDHI0_PON */
- gpio_request(GPIO_PORT75, NULL); /* SDSLOT1_PON */
- gpio_direction_output(GPIO_PORT17, 0);
- gpio_direction_output(GPIO_PORT74, 1);
- gpio_direction_output(GPIO_PORT75, 1);
+ gpio_request_one(GPIO_PORT17, GPIOF_OUT_INIT_LOW, NULL); /* SDHI0_18/33_B */
+ gpio_request_one(GPIO_PORT74, GPIOF_OUT_INIT_HIGH, NULL); /* SDHI0_PON */
+ gpio_request_one(GPIO_PORT75, GPIOF_OUT_INIT_HIGH, NULL); /* SDSLOT1_PON */
/* we can use GPIO_FN_IRQ31_PORT167 here for SDHI0 CD irq */
@@ -1101,12 +1099,10 @@ static void __init eva_init(void)
gpio_request(GPIO_FN_VIO_CKO, NULL);
/* CON1/CON15 Camera */
- gpio_request(GPIO_PORT173, NULL); /* STANDBY */
- gpio_request(GPIO_PORT172, NULL); /* RST */
- gpio_request(GPIO_PORT158, NULL); /* CAM_PON */
- gpio_direction_output(GPIO_PORT173, 0);
- gpio_direction_output(GPIO_PORT172, 1);
- gpio_direction_output(GPIO_PORT158, 0); /* see mt9t111_power() */
+ gpio_request_one(GPIO_PORT173, GPIOF_OUT_INIT_LOW, NULL); /* STANDBY */
+ gpio_request_one(GPIO_PORT172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */
+ /* see mt9t111_power() */
+ gpio_request_one(GPIO_PORT158, GPIOF_OUT_INIT_LOW, NULL); /* CAM_PON */
/* FSI-WM8978 */
gpio_request(GPIO_FN_FSIAIBT, NULL);
@@ -1133,15 +1129,13 @@ static void __init eva_init(void)
* DBGMD/LCDC0/FSIA MUX
* DBGMD_SELECT_B should be set after setting PFC Function.
*/
- gpio_request(GPIO_PORT176, NULL);
- gpio_direction_output(GPIO_PORT176, 1);
+ gpio_request_one(GPIO_PORT176, GPIOF_OUT_INIT_HIGH, NULL);
/*
* We can switch CON8/CON14 by SW1.5,
* but it needs after DBGMD_SELECT_B
*/
- gpio_request(GPIO_PORT6, NULL);
- gpio_direction_input(GPIO_PORT6);
+ gpio_request_one(GPIO_PORT6, GPIOF_IN, NULL);
if (gpio_get_value(GPIO_PORT6)) {
/* CON14 enable */
} else {
@@ -1155,8 +1149,8 @@ static void __init eva_init(void)
gpio_request(GPIO_FN_SDHI1_CD, NULL);
gpio_request(GPIO_FN_SDHI1_WP, NULL);
- gpio_request(GPIO_PORT16, NULL); /* SDSLOT2_PON */
- gpio_direction_output(GPIO_PORT16, 1);
+ /* SDSLOT2_PON */
+ gpio_request_one(GPIO_PORT16, GPIOF_OUT_INIT_HIGH, NULL);
platform_device_register(&sdhi1_device);
}
@@ -1175,8 +1169,6 @@ static void __init eva_init(void)
platform_add_devices(eva_devices,
ARRAY_SIZE(eva_devices));
- eva_clock_init();
-
rmobile_add_device_to_domain("A4LC", &lcdc0_device);
rmobile_add_device_to_domain("A4LC", &hdmi_lcdc_device);
if (usb)
@@ -1189,6 +1181,9 @@ static void __init eva_earlytimer_init(void)
{
r8a7740_clock_init(MD_CK0 | MD_CK2);
shmobile_earlytimer_init();
+
+ /* the rate of extal1 clock must be set before late_time_init */
+ eva_clock_init();
}
static void __init eva_add_early_devices(void)
diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
index 331b7ce..e50f866 100644
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ b/arch/arm/mach-shmobile/board-bonito.c
@@ -392,8 +392,7 @@ static void __init bonito_init(void)
/*
* base board settings
*/
- gpio_request(GPIO_PORT176, NULL);
- gpio_direction_input(GPIO_PORT176);
+ gpio_request_one(GPIO_PORT176, GPIOF_IN, NULL);
if (!gpio_get_value(GPIO_PORT176)) {
u16 bsw2;
u16 bsw3;
@@ -462,8 +461,8 @@ static void __init bonito_init(void)
gpio_request(GPIO_FN_LCD0_DISP, NULL);
gpio_request(GPIO_FN_LCD0_LCLK_PORT165, NULL);
- gpio_request(GPIO_PORT61, NULL); /* LCDDON */
- gpio_direction_output(GPIO_PORT61, 1);
+ gpio_request_one(GPIO_PORT61, GPIOF_OUT_INIT_HIGH,
+ NULL); /* LCDDON */
/* backlight on */
bonito_fpga_write(LCDCR, 1);
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index d759a9c..2ccc860 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -474,10 +474,8 @@ static void __init kota2_init(void)
gpio_request(GPIO_FN_D15_NAF15, NULL);
gpio_request(GPIO_FN_CS5A_, NULL);
gpio_request(GPIO_FN_WE0__FWE, NULL);
- gpio_request(GPIO_PORT144, NULL); /* PINTA2 */
- gpio_direction_input(GPIO_PORT144);
- gpio_request(GPIO_PORT145, NULL); /* RESET */
- gpio_direction_output(GPIO_PORT145, 1);
+ gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */
+ gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
/* KEYSC */
gpio_request(GPIO_FN_KEYIN0_PU, NULL);
@@ -509,8 +507,7 @@ static void __init kota2_init(void)
gpio_request(GPIO_FN_MMCD0_6, NULL);
gpio_request(GPIO_FN_MMCD0_7, NULL);
gpio_request(GPIO_FN_MMCCMD0, NULL);
- gpio_request(GPIO_PORT208, NULL); /* Reset */
- gpio_direction_output(GPIO_PORT208, 1);
+ gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
/* SDHI0 (microSD) */
gpio_request(GPIO_FN_SDHICD0_PU, NULL);
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 3efff2e..7f3a6b7 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -623,7 +623,7 @@ static int __init as3711_enable_lcdc_backlight(void)
0x45, 0xf0,
};
- if (!machine_is_kzm9g())
+ if (!of_machine_is_compatible("renesas,kzm9g"))
return 0;
if (!a)
@@ -672,8 +672,7 @@ static void __init kzm_init(void)
gpio_request(GPIO_FN_CS4_, NULL); /* CS4 */
/* SMSC */
- gpio_request(GPIO_PORT224, NULL); /* IRQ3 */
- gpio_direction_input(GPIO_PORT224);
+ gpio_request_one(GPIO_PORT224, GPIOF_IN, NULL); /* IRQ3 */
/* LCDC */
gpio_request(GPIO_FN_LCDD23, NULL);
@@ -703,14 +702,11 @@ static void __init kzm_init(void)
gpio_request(GPIO_FN_LCDDISP, NULL);
gpio_request(GPIO_FN_LCDDCK, NULL);
- gpio_request(GPIO_PORT222, NULL); /* LCDCDON */
- gpio_request(GPIO_PORT226, NULL); /* SC */
- gpio_direction_output(GPIO_PORT222, 1);
- gpio_direction_output(GPIO_PORT226, 1);
+ gpio_request_one(GPIO_PORT222, GPIOF_OUT_INIT_HIGH, NULL); /* LCDCDON */
+ gpio_request_one(GPIO_PORT226, GPIOF_OUT_INIT_HIGH, NULL); /* SC */
/* Touchscreen */
- gpio_request(GPIO_PORT223, NULL); /* IRQ8 */
- gpio_direction_input(GPIO_PORT223);
+ gpio_request_one(GPIO_PORT223, GPIOF_IN, NULL); /* IRQ8 */
/* enable MMCIF */
gpio_request(GPIO_FN_MMCCLK0, NULL);
@@ -734,8 +730,7 @@ static void __init kzm_init(void)
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL);
- gpio_request(GPIO_PORT15, NULL);
- gpio_direction_output(GPIO_PORT15, 1); /* power */
+ gpio_request_one(GPIO_PORT15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
/* enable Micro SD */
gpio_request(GPIO_FN_SDHID2_0, NULL);
@@ -744,8 +739,7 @@ static void __init kzm_init(void)
gpio_request(GPIO_FN_SDHID2_3, NULL);
gpio_request(GPIO_FN_SDHICMD2, NULL);
gpio_request(GPIO_FN_SDHICLK2, NULL);
- gpio_request(GPIO_PORT14, NULL);
- gpio_direction_output(GPIO_PORT14, 1); /* power */
+ gpio_request_one(GPIO_PORT14, GPIOF_OUT_INIT_HIGH, NULL); /* power */
/* I2C 3 */
gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL);
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index e2fafca..db968a5 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -202,9 +202,7 @@
*
* it needs amixer settings for playing
*
- * amixer set "Headphone" on
- * amixer set "HPOUTL Mixer DACH" on
- * amixer set "HPOUTR Mixer DACH" on
+ * amixer set "Headphone Enable" on
*/
/* Fixed 3.3V and 1.8V regulators to be used by multiple devices */
@@ -1404,11 +1402,10 @@ static void __init mackerel_init(void)
gpio_request(GPIO_FN_LCDDISP, NULL);
gpio_request(GPIO_FN_LCDDCK, NULL);
- gpio_request(GPIO_PORT31, NULL); /* backlight */
- gpio_direction_output(GPIO_PORT31, 0); /* off by default */
+ /* backlight, off by default */
+ gpio_request_one(GPIO_PORT31, GPIOF_OUT_INIT_LOW, NULL);
- gpio_request(GPIO_PORT151, NULL); /* LCDDON */
- gpio_direction_output(GPIO_PORT151, 1);
+ gpio_request_one(GPIO_PORT151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
/* USBHS0 */
gpio_request(GPIO_FN_VBUS0_0, NULL);
@@ -1424,8 +1421,7 @@ static void __init mackerel_init(void)
gpio_request(GPIO_FN_FSIAILR, NULL);
gpio_request(GPIO_FN_FSIAISLD, NULL);
gpio_request(GPIO_FN_FSIAOSLD, NULL);
- gpio_request(GPIO_PORT161, NULL);
- gpio_direction_output(GPIO_PORT161, 0); /* slave */
+ gpio_request_one(GPIO_PORT161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
gpio_request(GPIO_PORT9, NULL);
gpio_request(GPIO_PORT10, NULL);
@@ -1479,8 +1475,7 @@ static void __init mackerel_init(void)
gpio_request(GPIO_FN_SDHID1_0, NULL);
#endif
/* card detect pin for MMC slot (CN7) */
- gpio_request(GPIO_PORT41, NULL);
- gpio_direction_input(GPIO_PORT41);
+ gpio_request_one(GPIO_PORT41, GPIOF_IN, NULL);
/* enable SDHI2 */
gpio_request(GPIO_FN_SDHICMD2, NULL);
@@ -1491,8 +1486,7 @@ static void __init mackerel_init(void)
gpio_request(GPIO_FN_SDHID2_0, NULL);
/* card detect pin for microSD slot (CN23) */
- gpio_request(GPIO_PORT162, NULL);
- gpio_direction_input(GPIO_PORT162);
+ gpio_request_one(GPIO_PORT162, GPIOF_IN, NULL);
/* MMCIF */
gpio_request(GPIO_FN_MMCD0_0, NULL);
OpenPOWER on IntegriCloud