Merge tag 'omap-fixes-against-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Merge "omap fixes against v3.17-rc3" from Tony Lindgren:

Few fixes for omaps mostly for various devices to get them working
properly on the new am437x and dra7 hardware for several devices
such as I2C, NAND, DDR3 and USB. There's also a clock fix for omap3.

And also included are two minor cosmetic fixes that are not
stictly fixes for the new hardware support added recently to
downgrade a GPMC warning into a debug statement, and fix the
confusing comments for dra7-evm spi1 mux.

Note that these are all .dts changes except for a GPMC change.

* tag 'omap-fixes-against-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (255 commits)
  ARM: dts: dra7-evm: Add vtt regulator support
  ARM: dts: dra7-evm: Fix spi1 mux documentation
  ARM: dts: am43x-epos-evm: Disable QSPI to prevent conflict with GPMC-NAND
  ARM: OMAP2+: gpmc: Don't complain if wait pin is used without r/w monitoring
  ARM: dts: am43xx-epos-evm: Don't use read/write wait monitoring
  ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring
  ARM: dts: am437x-gp-evm: Use BCH16 ECC scheme instead of BCH8
  ARM: dts: am43x-epos-evm: Use BCH16 ECC scheme instead of BCH8
  ARM: dts: am4372: fix USB regs size
  ARM: dts: am437x-gp: switch i2c0 to 100KHz
  ARM: dts: dra7-evm: Fix 8th NAND partition's name
  ARM: dts: dra7-evm: Fix i2c3 pinmux and frequency
  Linux 3.17-rc3
  ...

Signed-off-by: Kevin Hilman <khilman@linaro.org>

17 files changed, 83 insertions, 58 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c49a775..32cbbd5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1983,8 +1983,6 @@ config XIP_PHYS_ADDR
 config KEXEC
 	bool "Kexec system call (EXPERIMENTAL)"
 	depends on (!SMP || PM_SLEEP_SMP)
-	select CRYPTO
-	select CRYPTO_SHA256
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 9b3d2ba..8689949 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -804,7 +804,7 @@
 
 			usb1: usb@48390000 {
 				compatible = "synopsys,dwc3";
-				reg = <0x48390000 0x17000>;
+				reg = <0x48390000 0x10000>;
 				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usb2_phy1>;
 				phy-names = "usb2-phy";
@@ -826,7 +826,7 @@
 
 			usb2: usb@483d0000 {
 				compatible = "synopsys,dwc3";
-				reg = <0x483d0000 0x17000>;
+				reg = <0x483d0000 0x10000>;
 				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usb2_phy2>;
 				phy-names = "usb2-phy";
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 646a6ea..e7ac47f 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -260,7 +260,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 
 	tps65218: tps65218@24 {
 		reg = <0x24>;
@@ -424,7 +424,7 @@
 	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
 	nand@0,0 {
 		reg = <0 0 4>;		/* device IO registers */
-		ti,nand-ecc-opt = "bch8";
+		ti,nand-ecc-opt = "bch16";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
 		gpmc,device-width = <1>;
@@ -443,8 +443,6 @@
 		gpmc,rd-cycle-ns = <40>;
 		gpmc,wr-cycle-ns = <40>;
 		gpmc,wait-pin = <0>;
-		gpmc,wait-on-read;
-		gpmc,wait-on-write;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index ed7dd239..ac3e485 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -435,13 +435,13 @@
 };
 
 &gpmc {
-	status = "okay";
+	status = "okay";	/* Disable QSPI when enabling GPMC (NAND) */
 	pinctrl-names = "default";
 	pinctrl-0 = <&nand_flash_x8>;
 	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
 	nand@0,0 {
 		reg = <0 0 0>; /* CS0, offset 0 */
-		ti,nand-ecc-opt = "bch8";
+		ti,nand-ecc-opt = "bch16";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
 		gpmc,device-width = <1>;
@@ -459,8 +459,7 @@
 		gpmc,access-ns = <30>; /* tCEA + 4*/
 		gpmc,rd-cycle-ns = <40>;
 		gpmc,wr-cycle-ns = <40>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
+		gpmc,wait-pin = <0>;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
@@ -557,7 +556,7 @@
 };
 
 &qspi {
-	status = "okay";
+	status = "disabled";	/* Disable GPMC (NAND) when enabling QSPI */
 	pinctrl-names = "default";
 	pinctrl-0 = <&qspi1_default>;
 
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 50f8022..e03fbf3 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include "dra74x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "TI DRA742";
@@ -24,9 +25,29 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	vtt_fixed: fixedregulator-vtt {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &dra7_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&vtt_pin>;
+
+	vtt_pin: pinmux_vtt_pin {
+		pinctrl-single,pins = <
+			0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
+		>;
+	};
+
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
 			0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
@@ -43,20 +64,19 @@
 
 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
-			0x410 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */
-			0x414 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */
+			0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
+			0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
 		>;
 	};
 
 	mcspi1_pins: pinmux_mcspi1_pins {
 		pinctrl-single,pins = <
-			0x3a4 (PIN_INPUT | MUX_MODE0) /* spi2_clk */
-			0x3a8 (PIN_INPUT | MUX_MODE0) /* spi2_d1 */
-			0x3ac (PIN_INPUT | MUX_MODE0) /* spi2_d0 */
-			0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
-			0x3b4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs1 */
-			0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs2 */
-			0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs3 */
+			0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */
+			0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */
+			0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */
+			0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
+			0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
+			0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
 		>;
 	};
 
@@ -284,7 +304,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c3_pins>;
-	clock-frequency = <3400000>;
+	clock-frequency = <400000>;
 };
 
 &mcspi1 {
@@ -483,7 +503,7 @@
 			reg = <0x001c0000 0x00020000>;
 		};
 		partition@7 {
-			label = "NAND.u-boot-env";
+			label = "NAND.u-boot-env.backup1";
 			reg = <0x001e0000 0x00020000>;
 		};
 		partition@8 {
@@ -504,3 +524,8 @@
 &usb2_phy2 {
 	phy-supply = <&ldousb_reg>;
 };
+
+&gpio7 {
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index b15f1a7..1fe45d1 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -353,7 +353,7 @@
 	};
 
 	twl_power: power {
-		compatible = "ti,twl4030-power-n900";
+		compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
 		ti,use_poweroff;
 	};
 };
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
index e47ff69..5c37500 100644
--- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
@@ -467,6 +467,7 @@
 		ti,bit-shift = <0x1e>;
 		reg = <0x0d00>;
 		ti,set-bit-to-disable;
+		ti,set-rate-parent;
 	};
 
 	dpll4_m6_ck: dpll4_m6_ck {
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index fd43f7f..79ecb4f 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -472,7 +472,6 @@ static inline void __sync_cache_range_r(volatile void *p, size_t size)
 	"mcr	p15, 0, r0, c1, c0, 0	@ set SCTLR \n\t" \
 	"isb	\n\t" \
 	"bl	v7_flush_dcache_"__stringify(level)" \n\t" \
-	"clrex	\n\t" \
 	"mrc	p15, 0, r0, c1, c0, 1	@ get ACTLR \n\t" \
 	"bic	r0, r0, #(1 << 6)	@ disable local coherency \n\t" \
 	"mcr	p15, 0, r0, c1, c0, 1	@ set ACTLR \n\t" \
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 963a251..819777d 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -74,6 +74,7 @@
 #define ARM_CPU_PART_CORTEX_A12		0x4100c0d0
 #define ARM_CPU_PART_CORTEX_A17		0x4100c0e0
 #define ARM_CPU_PART_CORTEX_A15		0x4100c0f0
+#define ARM_CPU_PART_MASK		0xff00fff0
 
 #define ARM_CPU_XSCALE_ARCH_MASK	0xe000
 #define ARM_CPU_XSCALE_ARCH_V1		0x2000
@@ -179,7 +180,7 @@ static inline unsigned int __attribute_const__ read_cpuid_implementor(void)
  */
 static inline unsigned int __attribute_const__ read_cpuid_part(void)
 {
-	return read_cpuid_id() & 0xff00fff0;
+	return read_cpuid_id() & ARM_CPU_PART_MASK;
 }
 
 static inline unsigned int __attribute_const__ __deprecated read_cpuid_part_number(void)
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index f4b46d3..afb9caf 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -50,6 +50,7 @@ typedef struct user_fp elf_fpregset_t;
 #define R_ARM_ABS32		2
 #define R_ARM_CALL		28
 #define R_ARM_JUMP24		29
+#define R_ARM_TARGET1		38
 #define R_ARM_V4BX		40
 #define R_ARM_PREL31		42
 #define R_ARM_MOVW_ABS_NC	43
diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h
index a252c0b..0ad7d49 100644
--- a/arch/arm/include/asm/smp_plat.h
+++ b/arch/arm/include/asm/smp_plat.h
@@ -8,6 +8,7 @@
 #include <linux/cpumask.h>
 #include <linux/err.h>
 
+#include <asm/cpu.h>
 #include <asm/cputype.h>
 
 /*
@@ -25,6 +26,20 @@ static inline bool is_smp(void)
 #endif
 }
 
+/**
+ * smp_cpuid_part() - return part id for a given cpu
+ * @cpu:	logical cpu id.
+ *
+ * Return: part id of logical cpu passed as argument.
+ */
+static inline unsigned int smp_cpuid_part(int cpu)
+{
+	struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpu);
+
+	return is_smp() ? cpu_info->cpuid & ARM_CPU_PART_MASK :
+			  read_cpuid_part();
+}
+
 /* all SMP configurations have the extended CPUID registers */
 #ifndef CONFIG_MMU
 #define tlb_ops_need_broadcast()	0
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index 8db307d..2fdf867 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -208,26 +208,21 @@
 #endif
 	.endif
 	msr	spsr_cxsf, \rpsr
-#if defined(CONFIG_CPU_V6)
-	ldr	r0, [sp]
-	strex	r1, r2, [sp]			@ clear the exclusive monitor
-	ldmib	sp, {r1 - pc}^			@ load r1 - pc, cpsr
-#elif defined(CONFIG_CPU_32v6K)
-	clrex					@ clear the exclusive monitor
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
-#else
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
+	@ We must avoid clrex due to Cortex-A15 erratum #830321
+	sub	r0, sp, #4			@ uninhabited address
+	strex	r1, r2, [r0]			@ clear the exclusive monitor
 #endif
+	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
 	.endm
 
 	.macro	restore_user_regs, fast = 0, offset = 0
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
 	ldr	lr, [sp, #\offset + S_PC]!	@ get pc
 	msr	spsr_cxsf, r1			@ save in spsr_svc
-#if defined(CONFIG_CPU_V6)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
+	@ We must avoid clrex due to Cortex-A15 erratum #830321
 	strex	r1, r2, [sp]			@ clear the exclusive monitor
-#elif defined(CONFIG_CPU_32v6K)
-	clrex					@ clear the exclusive monitor
 #endif
 	.if	\fast
 	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
@@ -261,7 +256,10 @@
 	.endif
 	ldr	lr, [sp, #S_SP]			@ top of the stack
 	ldrd	r0, r1, [sp, #S_LR]		@ calling lr and pc
-	clrex					@ clear the exclusive monitor
+
+	@ We must avoid clrex due to Cortex-A15 erratum #830321
+	strex	r2, r1, [sp, #S_LR]		@ clear the exclusive monitor
+
 	stmdb	lr!, {r0, r1, \rpsr}		@ calling lr and rfe context
 	ldmia	sp, {r0 - r12}
 	mov	sp, lr
@@ -282,13 +280,16 @@
 	.endm
 #else	/* ifdef CONFIG_CPU_V7M */
 	.macro	restore_user_regs, fast = 0, offset = 0
-	clrex					@ clear the exclusive monitor
 	mov	r2, sp
 	load_user_sp_lr r2, r3, \offset + S_SP	@ calling sp, lr
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
 	ldr	lr, [sp, #\offset + S_PC]	@ get pc
 	add	sp, sp, #\offset + S_SP
 	msr	spsr_cxsf, r1			@ save in spsr_svc
+
+	@ We must avoid clrex due to Cortex-A15 erratum #830321
+	strex	r1, r2, [sp]			@ clear the exclusive monitor
+
 	.if	\fast
 	ldmdb	sp, {r1 - r12}			@ get calling r1 - r12
 	.else
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 45e4781..6a4dffe 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -91,6 +91,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			break;
 
 		case R_ARM_ABS32:
+		case R_ARM_TARGET1:
 			*(u32 *)loc += sym->st_value;
 			break;
 
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
index b2f8b60..dc9a764 100644
--- a/arch/arm/mach-exynos/mcpm-exynos.c
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -43,7 +43,6 @@
 	"mcr	p15, 0, r0, c1, c0, 0	@ set SCTLR\n\t" \
 	"isb\n\t"\
 	"bl	v7_flush_dcache_"__stringify(level)"\n\t" \
-	"clrex\n\t"\
 	"mrc	p15, 0, r0, c1, c0, 1	@ get ACTLR\n\t" \
 	"bic	r0, r0, #(1 << 6)	@ disable local coherency\n\t" \
 	/* Dummy Load of a device register to avoid Erratum 799270 */ \
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 9f42d54..2f97228 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1207,8 +1207,7 @@ int gpmc_cs_program_settings(int cs, struct gpmc_settings *p)
 		}
 	}
 
-	if ((p->wait_on_read || p->wait_on_write) &&
-	    (p->wait_pin > gpmc_nr_waitpins)) {
+	if (p->wait_pin > gpmc_nr_waitpins) {
 		pr_err("%s: invalid wait-pin (%d)\n", __func__, p->wait_pin);
 		return -EINVAL;
 	}
@@ -1288,8 +1287,8 @@ void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p)
 		p->wait_on_write = of_property_read_bool(np,
 							 "gpmc,wait-on-write");
 		if (!p->wait_on_read && !p->wait_on_write)
-			pr_warn("%s: read/write wait monitoring not enabled!\n",
-				__func__);
+			pr_debug("%s: rd/wr wait monitoring not enabled!\n",
+				 __func__);
 	}
 }
 
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
index 3815a82..8c48c5c 100644
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@@ -17,12 +17,6 @@
  */
 	.align	5
 ENTRY(v6_early_abort)
-#ifdef CONFIG_CPU_V6
-	sub	r1, sp, #4			@ Get unused stack location
-	strex	r0, r1, [r1]			@ Clear the exclusive monitor
-#elif defined(CONFIG_CPU_32v6K)
-	clrex
-#endif
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
 /*
diff --git a/arch/arm/mm/abort-ev7.S b/arch/arm/mm/abort-ev7.S
index 7033752..4812ad0 100644
--- a/arch/arm/mm/abort-ev7.S
+++ b/arch/arm/mm/abort-ev7.S
@@ -13,12 +13,6 @@
  */
 	.align	5
 ENTRY(v7_early_abort)
-	/*
-	 * The effect of data aborts on on the exclusive access monitor are
-	 * UNPREDICTABLE. Do a CLREX to clear the state
-	 */
-	clrex
-
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR