Merge branch 'at91-3.4-cleanup2-DT2' of git://github.com/at91linux/linux-at91 into next/dt

* 'at91-3.4-cleanup2-DT2' of git://github.com/at91linux/linux-at91: (23 commits)
  ARM: at91: dt: enable usb ehci for sam9g45 and sam9x5
  ARM: at91: usb ehci add dt support
  ARM: at91: dt: enable usb ohci for sam9g20, sam9g45 amd sam9x5
  ARM: at91: usb ohci add dt support
  ARM: at91: add Shutdown Controller (SHDWC) DT support
  ARM: at91: add ram controller DT support
  ARM: at91: add RSTC (Reset Controller) dt support
  ARM: at91: always enable sam9 restart
  ARM: at91: add pmc DT support
  ARM: at91/dt: add specific DT soc init
  ARM: at91/dt: add Calao DAB-MMX daugther board support for USB-A9G20
  ARM: at91: sam9x5 add i2c DT support
  ARM: at91: sam9g45 add i2c DT support
  ARM: at91: usb_a9g20 add DT i2c support
  ARM: at91: sam9g20 add i2c DT support
  i2c/gpio: add DT support
  ARM: at91: sam9x5 add nand support
  atmel/nand: add DT support
  of/mtd/nand: add generic bindings and helpers
  of: introduce helper to manage boolean
  ...

39 files changed, 730 insertions, 118 deletions

diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index a100db0..f091d67 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -59,6 +59,26 @@
 				reg = <0xfffff000 0x200>;
 			};
 
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91rm9200-pmc";
+				reg = <0xfffffc00 0x100>;
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+			};
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+			};
+
 			pit: timer@fffffd30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffd30 0xf>;
@@ -172,5 +192,41 @@
 				status = "disabled";
 			};
 		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000
+			       0xffffe800 0x200
+			      >;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			gpios = <&pioC 13 0
+				 &pioC 14 0
+				 0
+				>;
+			status = "disabled";
+		};
+
+		usb0: ohci@00500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <20 4>;
+			status = "disabled";
+		};
+	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 23 0 /* sda */
+			 &pioA 24 0 /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index e64eb93..ac0dc00 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -15,7 +15,7 @@
 	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "128M console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+		bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
 	};
 
 	ahb {
@@ -33,5 +33,17 @@
 				status = "okay";
 			};
 		};
+
+		usb0: ohci@00600000 {
+			status = "okay";
+			num-ports = <2>;
+			atmel,vbus-gpio = <&pioD 19 0
+					   &pioD 20 0
+					  >;
+		};
+
+		usb1: ehci@00700000 {
+			status = "okay";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index f779667..3d0c32f 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -60,6 +60,22 @@
 				reg = <0xfffff000 0x200>;
 			};
 
+			ramc0: ramc@ffffe400 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe400 0x200
+				       0xffffe600 0x200>;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91rm9200-pmc";
+				reg = <0xfffffc00 0x100>;
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9g45-rstc";
+				reg = <0xfffffd00 0x10>;
+			};
+
 			pit: timer@fffffd30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffd30 0xf>;
@@ -67,6 +83,11 @@
 			};
 
 
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9rl-shdwc";
+				reg = <0xfffffd10 0x10>;
+			};
+
 			tcb0: timer@fff7c000 {
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfff7c000 0x100>;
@@ -180,5 +201,48 @@
 				status = "disabled";
 			};
 		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000
+			       0xffffe200 0x200
+			      >;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			gpios = <&pioC 8 0
+				 &pioC 14 0
+				 0
+				>;
+			status = "disabled";
+		};
+
+		usb0: ohci@00700000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <22 4>;
+			status = "disabled";
+		};
+
+		usb1: ehci@00800000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00800000 0x100000>;
+			interrupts = <22 4>;
+			status = "disabled";
+		};
+	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 20 0 /* sda */
+			 &pioA 21 0 /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <5>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 15e25f9..c4c8ae4 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -14,13 +14,24 @@
 	compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:4M(bootstrap/uboot/kernel)ro,60M(rootfs),-(data) root=/dev/mtdblock1 rw rootfstype=jffs2";
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
 	};
 
 	memory@70000000 {
 		reg = <0x70000000 0x4000000>;
 	};
 
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+	};
+
 	ahb {
 		apb {
 			dbgu: serial@ffffee00 {
@@ -36,6 +47,39 @@
 				status = "okay";
 			};
 		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			boot@0 {
+				label = "bootstrap/uboot/kernel";
+				reg = <0x0 0x400000>;
+			};
+
+			rootfs@400000 {
+				label = "rootfs";
+				reg = <0x400000 0x3C00000>;
+			};
+
+			data@4000000 {
+				label = "data";
+				reg = <0x4000000 0xC000000>;
+			};
+		};
+
+		usb0: ohci@00700000 {
+			status = "okay";
+			num-ports = <2>;
+			atmel,vbus-gpio = <&pioD 1 0
+					   &pioD 3 0>;
+		};
+
+		usb1: ehci@00800000 {
+			status = "okay";
+		};
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index a02e636..c111001 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -58,6 +58,26 @@
 				reg = <0xfffff000 0x200>;
 			};
 
+			ramc0: ramc@ffffe800 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe800 0x200>;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91rm9200-pmc";
+				reg = <0xfffffc00 0x100>;
+			};
+
+			rstc@fffffe00 {
+				compatible = "atmel,at91sam9g45-rstc";
+				reg = <0xfffffe00 0x10>;
+			};
+
+			shdwc@fffffe10 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfffffe10 0x10>;
+			};
+
 			pit: timer@fffffe30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffe30 0xf>;
@@ -172,5 +192,73 @@
 				status = "disabled";
 			};
 		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000
+			      >;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			gpios = <&pioC 8 0
+				 &pioC 14 0
+				 0
+				>;
+			status = "disabled";
+		};
+
+		usb0: ohci@00600000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <22 4>;
+			status = "disabled";
+		};
+
+		usb1: ehci@00700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <22 4>;
+			status = "disabled";
+		};
+	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 30 0 /* sda */
+			 &pioA 31 0 /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c@1 {
+		compatible = "i2c-gpio";
+		gpios = <&pioC 0 0 /* sda */
+			 &pioC 1 0 /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c@2 {
+		compatible = "i2c-gpio";
+		gpios = <&pioB 4 0 /* sda */
+			 &pioB 5 0 /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 64ae3e8..67936f8 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -12,6 +12,51 @@
 		reg = <0x20000000 0x8000000>;
 	};
 
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			uboot@40000 {
+				label = "u-boot";
+				reg = <0x40000 0x80000>;
+			};
+
+			ubootenv@c0000 {
+				label = "U-Boot Env";
+				reg = <0xc0000 0x140000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x1f800000>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
diff --git a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi
new file mode 100644
index 0000000..ad3eca1
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi
@@ -0,0 +1,96 @@
+/*
+ * calao-dab-mmx.dtsi - Device Tree Include file for Calao DAB-MMX Daughter Board
+ *
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/ {
+	ahb {
+		apb {
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			usart3: serial@fffd0000 {
+				status = "okay";
+			};
+		};
+	};
+
+	i2c-gpio@0 {
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led1 {
+			label = "user_led1";
+			gpios = <&pioB 20 1>;
+		};
+
+/*
+* led already used by mother board but active as high
+*		user_led2 {
+*			label = "user_led2";
+*			gpios = <&pioB 21 1>;
+*		};
+*/
+		user_led3 {
+			label = "user_led3";
+			gpios = <&pioB 22 1>;
+		};
+
+		user_led4 {
+			label = "user_led4";
+			gpios = <&pioB 23 1>;
+		};
+
+		red {
+			label = "red";
+			gpios = <&pioB 24 1>;
+		};
+
+		orange {
+			label = "orange";
+			gpios = <&pioB 30 1>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioB 31 1>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user_pb1 {
+			label = "user_pb1";
+			gpios = <&pioB 25 1>;
+			linux,code = <0x100>;
+		};
+
+		user_pb2 {
+			label = "user_pb2";
+			gpios = <&pioB 13 1>;
+			linux,code = <0x101>;
+		};
+
+		user_pb3 {
+			label = "user_pb3";
+			gpios = <&pioA 26 1>;
+			linux,code = <0x102>;
+		};
+
+		user_pb4 {
+			label = "user_pb4";
+			gpios = <&pioC 9 1>;
+			linux,code = <0x103>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
index d74545a..748d4c2 100644
--- a/arch/arm/boot/dts/usb_a9g20.dts
+++ b/arch/arm/boot/dts/usb_a9g20.dts
@@ -13,13 +13,24 @@
 	compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:128k(at91bootstrap),256k(barebox)ro,128k(bareboxenv),128k(bareboxenv2),4M(kernel),120M(rootfs),-(data) root=/dev/mtdblock5 rw rootfstype=ubifs";
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
 	};
 
 	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+	};
+
 	ahb {
 		apb {
 			dbgu: serial@fffff200 {
@@ -31,6 +42,53 @@
 				status = "okay";
 			};
 		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			barebox@20000 {
+				label = "barebox";
+				reg = <0x20000 0x40000>;
+			};
+
+			bareboxenv@60000 {
+				label = "bareboxenv";
+				reg = <0x60000 0x20000>;
+			};
+
+			bareboxenv2@80000 {
+				label = "bareboxenv2";
+				reg = <0x80000 0x20000>;
+			};
+
+			kernel@a0000 {
+				label = "kernel";
+				reg = <0xa0000 0x400000>;
+			};
+
+			rootfs@4a0000 {
+				label = "rootfs";
+				reg = <0x4a0000 0x7800000>;
+			};
+
+			data@7ca0000 {
+				label = "data";
+				reg = <0x7ca0000 0x8360000>;
+			};
+		};
+
+		usb0: ohci@00500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
 	};
 
 	leds {
@@ -55,4 +113,13 @@
 			gpio-key,wakeup;
 		};
 	};
+
+	i2c@0 {
+		status = "okay";
+
+		rv3029c2@56 {
+			compatible = "rv3029c2";
+			reg = <0x56>;
+		};
+	};
 };
diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig
index 9123568..994d331 100644
--- a/arch/arm/configs/at91sam9g20_defconfig
+++ b/arch/arm/configs/at91sam9g20_defconfig
@@ -74,6 +74,8 @@ CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
 CONFIG_SPI_SPIDEV=y
@@ -105,6 +107,7 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RV3029C2=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
 CONFIG_MSDOS_FS=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index e55cdcb..45db05d 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -20,9 +20,11 @@ config HAVE_AT91_USART5
 
 config AT91_SAM9_ALT_RESET
 	bool
+	default !ARCH_AT91X40
 
 config AT91_SAM9G45_RESET
 	bool
+	default !ARCH_AT91X40
 
 menu "Atmel AT91 System-on-Chip"
 
@@ -45,7 +47,6 @@ config ARCH_AT91SAM9260
 	select HAVE_AT91_USART4
 	select HAVE_AT91_USART5
 	select HAVE_NET_MACB
-	select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
@@ -53,7 +54,6 @@ config ARCH_AT91SAM9261
 	select GENERIC_CLOCKEVENTS
 	select HAVE_FB_ATMEL
 	select HAVE_AT91_DBGU0
-	select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9G10
 	bool "AT91SAM9G10"
@@ -61,7 +61,6 @@ config ARCH_AT91SAM9G10
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
-	select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
@@ -70,7 +69,6 @@ config ARCH_AT91SAM9263
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
 	select HAVE_AT91_DBGU1
-	select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
@@ -79,7 +77,6 @@ config ARCH_AT91SAM9RL
 	select HAVE_AT91_USART3
 	select HAVE_FB_ATMEL
 	select HAVE_AT91_DBGU0
-	select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9G20
 	bool "AT91SAM9G20"
@@ -90,7 +87,6 @@ config ARCH_AT91SAM9G20
 	select HAVE_AT91_USART4
 	select HAVE_AT91_USART5
 	select HAVE_NET_MACB
-	select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9G45
 	bool "AT91SAM9G45"
@@ -100,7 +96,6 @@ config ARCH_AT91SAM9G45
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
 	select HAVE_AT91_DBGU1
-	select AT91_SAM9G45_RESET
 
 config ARCH_AT91SAM9X5
 	bool "AT91SAM9x5 family"
@@ -109,7 +104,6 @@ config ARCH_AT91SAM9X5
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
 	select HAVE_AT91_DBGU0
-	select AT91_SAM9G45_RESET
 
 config ARCH_AT91X40
 	bool "AT91x40"
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 14b5a9c..d1e5750a 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -216,6 +216,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "fffdc000.timer", &tc3_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk),
+	CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk),
 	/* fake hclk clock */
 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
 	CLKDEV_CON_ID("pioA", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 0014573..df3bcea 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -232,6 +232,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	/* more tc lookup table for DT entries */
 	CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb0_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk),
+	CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk),
+	CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk),
 	/* fake hclk clock */
 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
 	CLKDEV_CON_ID("pioA", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index a34d96a..b6831ee 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -131,7 +131,7 @@ static struct clk dma1_clk = {
 	.type		= CLK_TYPE_PERIPHERAL,
 };
 static struct clk uhphs_clk = {
-	.name		= "uhphs_clk",
+	.name		= "uhphs",
 	.pmc_mask	= 1 << AT91SAM9X5_ID_UHPHS,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -230,6 +230,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	/* additional fake clock for macb_hclk */
 	CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk),
 	CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk),
+	CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk),
+	CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk),
+	CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk),
 };
 
 /*
@@ -299,14 +302,8 @@ static void __init at91sam9x5_map_io(void)
 	at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE);
 }
 
-static void __init at91sam9x5_ioremap_registers(void)
-{
-	at91_ioremap_ramc(0, AT91SAM9X5_BASE_DDRSDRC0, 512);
-}
-
 void __init at91sam9x5_initialize(void)
 {
-	arm_pm_restart = at91sam9g45_restart;
 	at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0);
 
 	/* Register GPIO subsystem (using DT) */
@@ -314,11 +311,6 @@ void __init at91sam9x5_initialize(void)
 }
 
 /* --------------------------------------------------------------------
- *  AT91SAM9x5 devices (temporary before modification of code)
- * -------------------------------------------------------------------- */
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-
-/* --------------------------------------------------------------------
  *  Interrupt initialization
  * -------------------------------------------------------------------- */
 /*
@@ -362,7 +354,6 @@ static unsigned int at91sam9x5_default_irq_priority[NR_AIC_IRQS] __initdata = {
 struct at91_init_soc __initdata at91sam9x5_soc = {
 	.map_io = at91sam9x5_map_io,
 	.default_irq_priority = at91sam9x5_default_irq_priority,
-	.ioremap_registers = at91sam9x5_ioremap_registers,
 	.register_clocks = at91sam9x5_register_clocks,
 	.init = at91sam9x5_initialize,
 };
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 3bb4069..161efba 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -138,6 +138,7 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.bus_width_16	= 0,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.parts		= afeb9260_nand_partition,
 	.num_parts	= ARRAY_SIZE(afeb9260_nand_partition),
 	.det_pin	= -EINVAL,
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index 8510e9e..c6d44ee 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -140,6 +140,7 @@ static struct atmel_nand_data __initdata cam60_nand_data = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PA9,
 	.enable_pin	= AT91_PIN_PA7,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.parts		= cam60_nand_partition,
 	.num_parts	= ARRAY_SIZE(cam60_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 989e1c5..5f3680e 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -117,6 +117,7 @@ static struct atmel_nand_data __initdata cpu9krea_nand_data = {
 	.enable_pin	= AT91_PIN_PC14,
 	.bus_width_16	= 0,
 	.det_pin	= -EINVAL,
+	.ecc_mode	= NAND_ECC_SOFT,
 };
 
 #ifdef CONFIG_MACH_CPU9260
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index 583b724..c18d4d30 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -19,10 +19,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
-#include <mach/hardware.h>
 #include <mach/board.h>
-#include <mach/system_rev.h>
-#include <mach/at91sam9_smc.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -30,58 +27,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include "sam9_smc.h"
 #include "generic.h"
 
 
-static void __init ek_init_early(void)
-{
-	/* Initialize processor: 12.000 MHz crystal */
-	at91_initialize(12000000);
-}
-
-/* det_pin is not connected */
-static struct atmel_nand_data __initdata ek_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.det_pin	= -EINVAL,
-	.rdy_pin	= AT91_PIN_PC8,
-	.enable_pin	= AT91_PIN_PC14,
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 2,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 2,
-
-	.ncs_read_pulse		= 4,
-	.nrd_pulse		= 4,
-	.ncs_write_pulse	= 4,
-	.nwe_pulse		= 4,
-
-	.read_cycle		= 7,
-	.write_cycle		= 7,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
-	.tdf_cycles		= 3,
-};
-
-static void __init ek_add_device_nand(void)
-{
-	ek_nand_data.bus_width_16 = board_have_nand_16bit();
-	/* setup bus-width (8 or 16) */
-	if (ek_nand_data.bus_width_16)
-		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
-	else
-		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
-	at91_add_device_nand(&ek_nand_data);
-}
-
 static const struct of_device_id irq_of_match[] __initconst = {
 
 	{ .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
@@ -98,9 +46,6 @@ static void __init at91_dt_init_irq(void)
 static void __init at91_dt_device_init(void)
 {
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
-	/* NAND */
-	ek_add_device_nand();
 }
 
 static const char *at91_dt_board_compat[] __initdata = {
@@ -114,7 +59,7 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
 	/* Maintainer: Atmel */
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
-	.init_early	= ek_init_early,
+	.init_early	= at91_dt_initialize,
 	.init_irq	= at91_dt_init_irq,
 	.init_machine	= at91_dt_device_init,
 	.dt_compat	= at91_dt_board_compat,
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index bb99145..59b92aa 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -108,6 +108,7 @@ static struct atmel_nand_data __initdata kb9202_nand_data = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC29,
 	.enable_pin	= AT91_PIN_PC28,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.parts		= kb9202_nand_partition,
 	.num_parts	= ARRAY_SIZE(kb9202_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 3f8617c..57d5f6a 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -190,6 +190,7 @@ static struct atmel_nand_data __initdata neocore926_nand_data = {
 	.rdy_pin		= AT91_PIN_PB19,
 	.rdy_pin_active_low	= 1,
 	.enable_pin		= AT91_PIN_PD15,
+	.ecc_mode		= NAND_ECC_SOFT,
 	.parts			= neocore926_nand_partition,
 	.num_parts		= ARRAY_SIZE(neocore926_nand_partition),
 	.det_pin		= -EINVAL,
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index e029d22..b6ed5ed 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -138,6 +138,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
+	.on_flash_bbt	= 1,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 9083df0..01332aa 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -150,6 +150,8 @@ static struct atmel_nand_data __initdata dk_nand_data = {
 	.det_pin	= AT91_PIN_PB1,
 	.rdy_pin	= AT91_PIN_PC2,
 	.enable_pin	= -EINVAL,
+	.ecc_mode	= NAND_ECC_SOFT,
+	.on_flash_bbt	= 1,
 	.parts		= dk_nand_partition,
 	.num_parts	= ARRAY_SIZE(dk_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 84bce58..e8b116b 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -139,6 +139,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index be8233b..d5aec55 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -181,6 +181,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
+	.on_flash_bbt	= 1,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 4089507..c3f9944 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -187,6 +187,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC15,
 	.enable_pin	= AT91_PIN_PC14,
+	.ecc_mode	= NAND_ECC_SOFT,
+	.on_flash_bbt	= 1,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 29f6605..66f0ddf 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -187,6 +187,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
+	.ecc_mode	= NAND_ECC_SOFT,
+	.on_flash_bbt	= 1,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 843d628..8923ec9 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -166,6 +166,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.det_pin	= -EINVAL,
+	.ecc_mode	= NAND_ECC_SOFT,
+	.on_flash_bbt	= 1,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 57497e2..e1bea73 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -148,6 +148,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC8,
 	.enable_pin	= AT91_PIN_PC14,
 	.det_pin	= -EINVAL,
+	.ecc_mode	= NAND_ECC_SOFT,
+	.on_flash_bbt	= 1,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index c1366d0..b109ce2 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -94,6 +94,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PD17,
 	.enable_pin	= AT91_PIN_PB6,
+	.ecc_mode	= NAND_ECC_SOFT,
+	.on_flash_bbt	= 1,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 3c2e3fc..ebc9d01 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -110,6 +110,7 @@ static struct atmel_nand_data __initdata snapper9260_nand_data = {
 	.bus_width_16	= 0,
 	.enable_pin	= -EINVAL,
 	.det_pin	= -EINVAL,
+	.ecc_mode	= NAND_ECC_SOFT,
 };
 
 static struct sam9_smc_config __initdata snapper9260_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 72eb3b4..7640049 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -86,6 +86,7 @@ static struct atmel_nand_data __initdata nand_data = {
 	.enable_pin	= AT91_PIN_PC14,
 	.bus_width_16	= 0,
 	.det_pin	= -EINVAL,
+	.ecc_mode	= NAND_ECC_SOFT,
 };
 
 static struct sam9_smc_config __initdata nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index 26c36fc..b7483a3 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -198,6 +198,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
+	.ecc_mode	= NAND_ECC_SOFT,
+	.on_flash_bbt	= 1,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 52f4607..38dd279 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -182,6 +182,7 @@ static struct atmel_nand_data __initdata yl9200_nand_data = {
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PC14,	/* R/!B (Sheet10) */
 	.enable_pin	= AT91_PIN_PC15,	/* !CE  (Sheet10) */
+	.ecc_mode	= NAND_ECC_SOFT,
 	.parts		= yl9200_nand_partition,
 	.num_parts	= ARRAY_SIZE(yl9200_nand_partition),
 };
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index be51ca7..a0f4d74 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -23,6 +23,7 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/of_address.h>
 
 #include <mach/hardware.h>
 #include <mach/at91_pmc.h>
@@ -671,16 +672,12 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
 	uhpck.rate_hz /= 1 + ((at91_pmc_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
 }
 
-int __init at91_clock_init(unsigned long main_clock)
+static int __init at91_pmc_init(unsigned long main_clock)
 {
 	unsigned tmp, freq, mckr;
 	int i;
 	int pll_overclock = false;
 
-	at91_pmc_base = ioremap(AT91_PMC, 256);
-	if (!at91_pmc_base)
-		panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC);
-
 	/*
 	 * When the bootloader initialized the main oscillator correctly,
 	 * there's no problem using the cycle counter.  But if it didn't,
@@ -802,6 +799,55 @@ int __init at91_clock_init(unsigned long main_clock)
 	return 0;
 }
 
+#if defined(CONFIG_OF)
+static struct of_device_id pmc_ids[] = {
+	{ .compatible = "atmel,at91rm9200-pmc" },
+	{ /*sentinel*/ }
+};
+
+static struct of_device_id osc_ids[] = {
+	{ .compatible = "atmel,osc" },
+	{ /*sentinel*/ }
+};
+
+int __init at91_dt_clock_init(void)
+{
+	struct device_node *np;
+	u32 main_clock = 0;
+
+	np = of_find_matching_node(NULL, pmc_ids);
+	if (!np)
+		panic("unable to find compatible pmc node in dtb\n");
+
+	at91_pmc_base = of_iomap(np, 0);
+	if (!at91_pmc_base)
+		panic("unable to map pmc cpu registers\n");
+
+	of_node_put(np);
+
+	/* retrieve the freqency of fixed clocks from device tree */
+	np = of_find_matching_node(NULL, osc_ids);
+	if (np) {
+		u32 rate;
+		if (!of_property_read_u32(np, "clock-frequency", &rate))
+			main_clock = rate;
+	}
+
+	of_node_put(np);
+
+	return at91_pmc_init(main_clock);
+}
+#endif
+
+int __init at91_clock_init(unsigned long main_clock)
+{
+	at91_pmc_base = ioremap(AT91_PMC, 256);
+	if (!at91_pmc_base)
+		panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC);
+
+	return at91_pmc_init(main_clock);
+}
+
 /*
  * Several unused clocks may be active.  Turn them off.
  */
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 459f01a..dd9b346 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -20,6 +20,7 @@ extern void __init at91_init_sram(int bank, unsigned long base,
 extern void __init at91rm9200_set_type(int type);
 extern void __init at91_initialize(unsigned long main_clock);
 extern void __init at91x40_initialize(unsigned long main_clock);
+extern void __init at91_dt_initialize(void);
 
  /* Interrupts */
 extern void __init at91_init_irq_default(void);
@@ -52,6 +53,7 @@ extern void __init at91sam9rl_set_console_clock(int id);
 extern void __init at91sam9g45_set_console_clock(int id);
 #ifdef CONFIG_AT91_PMC_UNIT
 extern int __init at91_clock_init(unsigned long main_clock);
+extern int __init at91_dt_clock_init(void);
 #else
 static int inline at91_clock_init(unsigned long main_clock) { return 0; }
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91_shdwc.h b/arch/arm/mach-at91/include/mach/at91_shdwc.h
index 1d4fe82..60478ea 100644
--- a/arch/arm/mach-at91/include/mach/at91_shdwc.h
+++ b/arch/arm/mach-at91/include/mach/at91_shdwc.h
@@ -36,9 +36,11 @@ extern void __iomem *at91_shdwc_base;
 #define			AT91_SHDW_WKMODE0_HIGH		1
 #define			AT91_SHDW_WKMODE0_LOW		2
 #define			AT91_SHDW_WKMODE0_ANYLEVEL	3
-#define		AT91_SHDW_CPTWK0	(0xf << 4)		/* Counter On Wake Up 0 */
+#define		AT91_SHDW_CPTWK0_MAX	0xf			/* Maximum Counter On Wake Up 0 */
+#define		AT91_SHDW_CPTWK0	(AT91_SHDW_CPTWK0_MAX << 4) /* Counter On Wake Up 0 */
 #define			AT91_SHDW_CPTWK0_(x)	((x) << 4)
 #define		AT91_SHDW_RTTWKEN	(1   << 16)		/* Real Time Timer Wake-up Enable */
+#define		AT91_SHDW_RTCWKEN	(1   << 17)		/* Real Time Clock Wake-up Enable */
 
 #define AT91_SHDW_SR		0x08			/* Shut Down Status Register */
 #define		AT91_SHDW_WAKEUP0	(1 <<  0)		/* Wake-up 0 Status */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h
index a297a77..88e43d5 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9x5.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h
@@ -55,11 +55,6 @@
 #define AT91SAM9X5_BASE_USART2	0xf8024000
 
 /*
- * System Peripherals
- */
-#define AT91SAM9X5_BASE_DDRSDRC0	0xffffe800
-
-/*
  * Base addresses for early serial code (uncompress.h)
  */
 #define AT91_DBGU	AT91_BASE_DBGU0
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index dc8d6d4..544a5d5 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -41,6 +41,7 @@
 #include <sound/atmel-ac97c.h>
 #include <linux/serial.h>
 #include <linux/platform_data/macb.h>
+#include <linux/platform_data/atmel.h>
 
  /* USB Device */
 struct at91_udc_data {
@@ -98,20 +99,6 @@ extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
 extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
 extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
 
- /* NAND / SmartMedia */
-struct atmel_nand_data {
-	int		enable_pin;	/* chip enable */
-	int		det_pin;	/* card detect */
-	int		rdy_pin;	/* ready/busy */
-	u8              rdy_pin_active_low;     /* rdy_pin value is inverted */
-	u8		ale;		/* address line number connected to ALE */
-	u8		cle;		/* address line number connected to CLE */
-	u8		bus_width_16;	/* buswidth is 16 bit */
-	u8		correction_cap; /* PMECC correction capability */
-	u16		sector_size;    /* Sector size for PMECC */
-	struct mtd_partition *parts;
-	unsigned int	num_parts;
-};
 extern void __init at91_add_device_nand(struct atmel_nand_data *data);
 
  /* I2C*/
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 6c9d5e6..f630250 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -197,19 +197,6 @@ extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
 extern u32 at91_slow_clock_sz;
 #endif
 
-void __iomem *at91_ramc_base[2];
-
-void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
-{
-	if (id < 0 || id > 1) {
-		pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id);
-		BUG();
-	}
-	at91_ramc_base[id] = ioremap(addr, size);
-	if (!at91_ramc_base[id])
-		panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
-}
-
 static int at91_pm_enter(suspend_state_t state)
 {
 	at91_gpio_suspend();
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 372396c..1083739 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -9,6 +9,7 @@
 #include <linux/io.h>
 #include <linux/mm.h>
 #include <linux/pm.h>
+#include <linux/of_address.h>
 
 #include <asm/mach/map.h>
 
@@ -51,6 +52,19 @@ void __init at91_init_interrupts(unsigned int *priority)
 	at91_gpio_irq_setup();
 }
 
+void __iomem *at91_ramc_base[2];
+
+void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
+{
+	if (id < 0 || id > 1) {
+		pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id);
+		BUG();
+	}
+	at91_ramc_base[id] = ioremap(addr, size);
+	if (!at91_ramc_base[id])
+		panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
+}
+
 static struct map_desc sram_desc[2] __initdata;
 
 void __init at91_init_sram(int bank, unsigned long base, unsigned int length)
@@ -285,6 +299,150 @@ void __init at91_ioremap_matrix(u32 base_addr)
 		panic("Impossible to ioremap at91_matrix_base\n");
 }
 
+#if defined(CONFIG_OF)
+static struct of_device_id rstc_ids[] = {
+	{ .compatible = "atmel,at91sam9260-rstc", .data = at91sam9_alt_restart },
+	{ .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },
+	{ /*sentinel*/ }
+};
+
+static void at91_dt_rstc(void)
+{
+	struct device_node *np;
+	const struct of_device_id *of_id;
+
+	np = of_find_matching_node(NULL, rstc_ids);
+	if (!np)
+		panic("unable to find compatible rstc node in dtb\n");
+
+	at91_rstc_base = of_iomap(np, 0);
+	if (!at91_rstc_base)
+		panic("unable to map rstc cpu registers\n");
+
+	of_id = of_match_node(rstc_ids, np);
+	if (!of_id)
+		panic("AT91: rtsc no restart function availlable\n");
+
+	arm_pm_restart = of_id->data;
+
+	of_node_put(np);
+}
+
+static struct of_device_id ramc_ids[] = {
+	{ .compatible = "atmel,at91sam9260-sdramc" },
+	{ .compatible = "atmel,at91sam9g45-ddramc" },
+	{ /*sentinel*/ }
+};
+
+static void at91_dt_ramc(void)
+{
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, ramc_ids);
+	if (!np)
+		panic("unable to find compatible ram conroller node in dtb\n");
+
+	at91_ramc_base[0] = of_iomap(np, 0);
+	if (!at91_ramc_base[0])
+		panic("unable to map ramc[0] cpu registers\n");
+	/* the controller may have 2 banks */
+	at91_ramc_base[1] = of_iomap(np, 1);
+
+	of_node_put(np);
+}
+
+static struct of_device_id shdwc_ids[] = {
+	{ .compatible = "atmel,at91sam9260-shdwc", },
+	{ .compatible = "atmel,at91sam9rl-shdwc", },
+	{ .compatible = "atmel,at91sam9x5-shdwc", },
+	{ /*sentinel*/ }
+};
+
+static const char *shdwc_wakeup_modes[] = {
+	[AT91_SHDW_WKMODE0_NONE]	= "none",
+	[AT91_SHDW_WKMODE0_HIGH]	= "high",
+	[AT91_SHDW_WKMODE0_LOW]		= "low",
+	[AT91_SHDW_WKMODE0_ANYLEVEL]	= "any",
+};
+
+const int at91_dtget_shdwc_wakeup_mode(struct device_node *np)
+{
+	const char *pm;
+	int err, i;
+
+	err = of_property_read_string(np, "atmel,wakeup-mode", &pm);
+	if (err < 0)
+		return AT91_SHDW_WKMODE0_ANYLEVEL;
+
+	for (i = 0; i < ARRAY_SIZE(shdwc_wakeup_modes); i++)
+		if (!strcasecmp(pm, shdwc_wakeup_modes[i]))
+			return i;
+
+	return -ENODEV;
+}
+
+static void at91_dt_shdwc(void)
+{
+	struct device_node *np;
+	int wakeup_mode;
+	u32 reg;
+	u32 mode = 0;
+
+	np = of_find_matching_node(NULL, shdwc_ids);
+	if (!np) {
+		pr_debug("AT91: unable to find compatible shutdown (shdwc) conroller node in dtb\n");
+		return;
+	}
+
+	at91_shdwc_base = of_iomap(np, 0);
+	if (!at91_shdwc_base)
+		panic("AT91: unable to map shdwc cpu registers\n");
+
+	wakeup_mode = at91_dtget_shdwc_wakeup_mode(np);
+	if (wakeup_mode < 0) {
+		pr_warn("AT91: shdwc unknown wakeup mode\n");
+		goto end;
+	}
+
+	if (!of_property_read_u32(np, "atmel,wakeup-counter", &reg)) {
+		if (reg > AT91_SHDW_CPTWK0_MAX) {
+			pr_warn("AT91: shdwc wakeup conter 0x%x > 0x%x reduce it to 0x%x\n",
+				reg, AT91_SHDW_CPTWK0_MAX, AT91_SHDW_CPTWK0_MAX);
+			reg = AT91_SHDW_CPTWK0_MAX;
+		}
+		mode |= AT91_SHDW_CPTWK0_(reg);
+	}
+
+	if (of_property_read_bool(np, "atmel,wakeup-rtc-timer"))
+			mode |= AT91_SHDW_RTCWKEN;
+
+	if (of_property_read_bool(np, "atmel,wakeup-rtt-timer"))
+			mode |= AT91_SHDW_RTTWKEN;
+
+	at91_shdwc_write(AT91_SHDW_MR, wakeup_mode | mode);
+
+end:
+	pm_power_off = at91sam9_poweroff;
+
+	of_node_put(np);
+}
+
+void __init at91_dt_initialize(void)
+{
+	at91_dt_rstc();
+	at91_dt_ramc();
+	at91_dt_shdwc();
+
+	/* Init clock subsystem */
+	at91_dt_clock_init();
+
+	/* Register the processor-specific clocks */
+	at91_boot_soc.register_clocks();
+
+	at91_boot_soc.init();
+}
+#endif
+
 void __init at91_initialize(unsigned long main_clock)
 {
 	at91_boot_soc.ioremap_registers();