diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-02-23 15:52:14 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-02-23 15:52:14 -0800 |
| commit | c61c15e08abb4365f100e411604b57a03ee5ae90 (patch) | |
| tree | 284c831dc838f57ab77bb0e9c872db00f58d756f /arch/arm64 | |
| parent | 195849ea13549dc2390b7db7d80a22d76f73dfae (diff) | |
| parent | cbab31977008a9eb9eb241879befc2e20285740c (diff) | |
| download | op-kernel-dev-c61c15e08abb4365f100e411604b57a03ee5ae90.zip op-kernel-dev-c61c15e08abb4365f100e411604b57a03ee5ae90.tar.gz | |
Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM 64-bit DT updates from Arnd Bergmann:
"ARM64 DT updates are fairly small this time, only two new SoCs and a
handful of new machines get added, all of them similar to other
hardware we already support.
New SoC:
- HiSilicon Kirin960/Hi3660 and HiKey960 development board
- NXP LS1012a with three reference boards:
http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/qoriq-layerscape-arm-processors/qoriq-layerscape-1012a-low-power-communication-processor:LS1012A
New development board:
- Banana Pi M64, based on Allwinner A64:
http://www.banana-pi.org/m64.html
- SolidRun MACCHIATOBin based on Marvell Armada 8K:
https://www.solid-run.com/marvell-armada-family/armada-8040-community-board/
- Broadcom BCM958712DxXMC NorthStar2 reference board (another one)
A lot of platforms improve support for existing machines by adding
extra devices for which a binding and driver is availabe:
Allwinner:
- MMC, USB
ARM Juno:
- Coresight, STM
Broadcom:
- NS2 GICv2m irqchip and PCIe
Marvell:
- Armada 3700 SPI, I2C, ethernet switch
Mediatek:
- MT8173 thermal
NXP i.MX:
- LS1046A thermal
Qualcomm:
- coresight on MSM8916, HDMI, WCNSS, SCM
Renesas:
- r8a779[56] thermal, powerdomain, ethernet, sound, pwm, can, can fd
Rockchip:
- thermal, eDP, pinctrl enhancements
Samsung:
- TM2 touchkey, Exynos5433 HDMI and power management improvements
UniPhier:
- SD reset, eMMC controller
ZTE:
- oppv2 cpufreq"
* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (110 commits)
arm64: dts: qcom: Add msm8916 CoreSight components
arm64: dts: marvell: adjust name of sd-mmc-gop clock in syscon
arm64: allwinner: add BananaPi-M64 support
arm64: allwinner: a64: add UART1 pin nodes
arm64: allwinner: pine64: add MMC support
arm64: allwinner: a64: Increase the MMC max frequency
arm64: allwinner: a64: Add MMC pinctrl nodes
arm64: allwinner: a64: Add MMC nodes
dt-bindings: clockgen: Add compatible string for LS1012A
Documentation: DT: add LS1012A compatible for SCFG and DCFG
Documentation: DT: Add entry for FSL LS1012A RDB, FRDM, QDS boards
arm64: dts: marvell: add generic-ahci compatibles for CP110 ahci
arm64: tegra: Use symbolic reset identifiers
arm64: dts: r8a7796: Mark EthernetAVB device node disabled
arm64: dts: r8a7795: Mark EthernetAVB device node disabled
arm64: dts: r8a7795: tidyup audma definition order
arm64: dts: r8a7796: Link ARM GIC to clock and clock domain
arm64: dts: r8a7795: Link ARM GIC to clock and clock domain
arm64: dts: r8a7796: Add R-Car Gen3 thermal support
arm64: dts: r8a7795: Add R-Car Gen3 thermal support
...
Diffstat (limited to 'arch/arm64')
66 files changed, 4749 insertions, 1503 deletions
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 1e29a5a..bc6f342 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -1,3 +1,4 @@ +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb always := $(dtb-y) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts new file mode 100644 index 0000000..6872135 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -0,0 +1,120 @@ +/* + * Copyright (c) 2016 ARM Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "sun50i-a64.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "BananaPi-M64"; + compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; +}; + +&i2c1_pins { + bias-pull-up; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_vcc3v3>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index 4709590..c680ed3 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -44,6 +44,8 @@ #include "sun50i-a64.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Pine64"; compatible = "pine64,pine64", "allwinner,sun50i-a64"; @@ -55,11 +57,16 @@ chosen { stdout-path = "serial0:115200n8"; }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; +&ehci1 { status = "okay"; }; @@ -72,3 +79,33 @@ &i2c1_pins { bias-pull-up; }; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_vcc3v3>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index e0dcab8..1c64ea2 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -42,8 +42,9 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/clock/sun50i-a64-ccu.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/reset/sun50i-a64-ccu.h> / { interrupt-parent = <&gic>; @@ -120,6 +121,105 @@ #size-cells = <1>; ranges; + mmc0: mmc@1c0f000 { + compatible = "allwinner,sun50i-a64-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + max-frequency = <150000000>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@1c10000 { + compatible = "allwinner,sun50i-a64-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC1>; + reset-names = "ahb"; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + max-frequency = <150000000>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@1c11000 { + compatible = "allwinner,sun50i-a64-emmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC2>; + reset-names = "ahb"; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + max-frequency = <200000000>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + usb_otg: usb@01c19000 { + compatible = "allwinner,sun8i-a33-musb"; + reg = <0x01c19000 0x0400>; + clocks = <&ccu CLK_BUS_OTG>; + resets = <&ccu RST_BUS_OTG>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + status = "disabled"; + }; + + usbphy: phy@01c19400 { + compatible = "allwinner,sun50i-a64-usb-phy"; + reg = <0x01c19400 0x14>, + <0x01c1b800 0x4>; + reg-names = "phy_ctrl", + "pmu1"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>; + clock-names = "usb0_phy", + "usb1_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>; + reset-names = "usb0_reset", + "usb1_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ehci1: usb@01c1b000 { + compatible = "allwinner,sun50i-a64-ehci", "generic-ehci"; + reg = <0x01c1b000 0x100>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI1>, + <&ccu CLK_BUS_EHCI1>, + <&ccu CLK_USB_OHCI1>; + resets = <&ccu RST_BUS_OHCI1>, + <&ccu RST_BUS_EHCI1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci1: usb@01c1b400 { + compatible = "allwinner,sun50i-a64-ohci", "generic-ohci"; + reg = <0x01c1b400 0x100>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI1>, + <&ccu CLK_USB_OHCI1>; + resets = <&ccu RST_BUS_OHCI1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + ccu: clock@01c20000 { compatible = "allwinner,sun50i-a64-ccu"; reg = <0x01c20000 0x400>; @@ -146,10 +246,45 @@ function = "i2c1"; }; + mmc0_pins: mmc0-pins { + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc1_pins: mmc1-pins { + pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc2_pins: mmc2-pins { + pins = "PC1", "PC5", "PC6", "PC8", "PC9", + "PC10","PC11", "PC12", "PC13", + "PC14", "PC15", "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + uart0_pins_a: uart0@0 { pins = "PB8", "PB9"; function = "uart0"; }; + + uart1_pins: uart1_pins { + pins = "PG6", "PG7"; + function = "uart1"; + }; + + uart1_rts_cts_pins: uart1_rts_cts_pins { + pins = "PG8", "PG9"; + function = "uart1"; + }; }; uart0: serial@1c28000 { diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 7d83224..9d799d9 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -1,6 +1,10 @@ +#include "juno-clocks.dtsi" + +/ { /* * Devices shared by all Juno boards */ + dma-ranges = <0 0 0 0 0x100 0>; memtimer: timer@2a810000 { compatible = "arm,armv7-timer-mem"; @@ -48,6 +52,7 @@ #iommu-cells = <1>; #global-interrupts = <1>; dma-coherent; + power-domains = <&scpi_devpd 0>; status = "disabled"; }; @@ -83,7 +88,7 @@ * The actual size is just 4K though 64K is reserved. Access to the * unmapped reserved region results in a DECERR response. */ - etf@20010000 { + etf@20010000 { /* etf0 */ compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0 0x20010000 0 0x1000>; @@ -97,7 +102,7 @@ /* input port */ port@0 { reg = <0>; - etf_in_port: endpoint { + etf0_in_port: endpoint { slave-mode; remote-endpoint = <&main_funnel_out_port>; }; @@ -106,8 +111,7 @@ /* output port */ port@1 { reg = <0>; - etf_out_port: endpoint { - remote-endpoint = <&replicator_in_port0>; + etf0_out_port: endpoint { }; }; }; @@ -128,7 +132,8 @@ }; }; - main-funnel@20040000 { + /* main funnel on Juno r0, cssys0 funnel on Juno r1/r2 as per TRM*/ + main_funnel: funnel@20040000 { compatible = "arm,coresight-funnel", "arm,primecell"; reg = <0 0x20040000 0 0x1000>; @@ -139,13 +144,15 @@ #address-cells = <1>; #size-cells = <0>; + /* output port */ port@0 { reg = <0>; main_funnel_out_port: endpoint { - remote-endpoint = <&etf_in_port>; + remote-endpoint = <&etf0_in_port>; }; }; + /* input ports */ port@1 { reg = <0>; main_funnel_in_port0: endpoint { @@ -161,7 +168,6 @@ remote-endpoint = <&cluster1_funnel_out_port>; }; }; - }; }; @@ -181,6 +187,21 @@ }; }; + stm@20100000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x20100000 0 0x1000>, + <0 0x28000000 0 0x1000000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + port { + stm_out_port: endpoint { + }; + }; + }; + etm0: etm@22040000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x22040000 0 0x1000>; @@ -195,7 +216,7 @@ }; }; - cluster0-funnel@220c0000 { + funnel@220c0000 { /* cluster0 funnel */ compatible = "arm,coresight-funnel", "arm,primecell"; reg = <0 0x220c0000 0 0x1000>; @@ -259,7 +280,7 @@ }; }; - cluster1-funnel@230c0000 { + funnel@230c0000 { /* cluster1 funnel */ compatible = "arm,coresight-funnel", "arm,primecell"; reg = <0 0x230c0000 0 0x1000>; @@ -382,7 +403,6 @@ reg = <0>; replicator_in_port0: endpoint { slave-mode; - remote-endpoint = <&etf_out_port>; }; }; }; @@ -507,8 +527,6 @@ }; }; - /include/ "juno-clocks.dtsi" - smmu_dma: iommu@7fb00000 { compatible = "arm,mmu-401", "arm,smmu-v1"; reg = <0x0 0x7fb00000 0x0 0x10000>; @@ -719,3 +737,4 @@ interrupt-map-mask = <0 0>; interrupt-map = <0 0 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>; }; +}; diff --git a/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/arch/arm64/boot/dts/arm/juno-clocks.dtsi index 25352ed..e5e265d 100644 --- a/arch/arm64/boot/dts/arm/juno-clocks.dtsi +++ b/arch/arm64/boot/dts/arm/juno-clocks.dtsi @@ -6,7 +6,7 @@ * This file is licensed under a dual GPLv2 or BSD license. * */ - +/ { /* SoC fixed clocks */ soc_uartclk: refclk7273800hz { compatible = "fixed-clock"; @@ -42,3 +42,4 @@ clock-frequency = <400000000>; clock-output-names = "faxi_clk"; }; +}; diff --git a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi new file mode 100644 index 0000000..aa03050 --- /dev/null +++ b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi @@ -0,0 +1,100 @@ +/ { + funnel@20130000 { /* cssys1 */ + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0x20130000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* output port */ + port@0 { + reg = <0>; + csys1_funnel_out_port: endpoint { + remote-endpoint = <&etf1_in_port>; + }; + }; + + /* input port */ + port@1 { + reg = <0>; + csys1_funnel_in_port0: endpoint { + slave-mode; + }; + }; + + }; + }; + + etf@20140000 { /* etf1 */ + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x20140000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* input port */ + port@0 { + reg = <0>; + etf1_in_port: endpoint { + slave-mode; + remote-endpoint = <&csys1_funnel_out_port>; + }; + }; + + /* output port */ + port@1 { + reg = <0>; + etf1_out_port: endpoint { + remote-endpoint = <&csys2_funnel_in_port1>; + }; + }; + }; + }; + + funnel@20150000 { /* cssys2 */ + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0x20150000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* output port */ + port@0 { + reg = <0>; + csys2_funnel_out_port: endpoint { + remote-endpoint = <&replicator_in_port0>; + }; + }; + + /* input ports */ + port@1 { + reg = <0>; + csys2_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etf0_out_port>; + }; + }; + + port@2 { + reg = <1>; + csys2_funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&etf1_out_port>; + }; + }; + + }; + }; +}; diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index 3ad4c30..0986016 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -131,13 +131,6 @@ vddvario-supply = <&mb_fixed_3v3>; }; - usb@5,00000000 { - compatible = "nxp,usb-isp1763"; - reg = <5 0x00000000 0x20000>; - bus-width = <16>; - interrupts = <4>; - }; - iofpga@3,00000000 { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index eec37fe..0033c59 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -9,6 +9,8 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> +#include "juno-base.dtsi" +#include "juno-cs-r1r2.dtsi" / { model = "ARM Juno development board (r1)"; @@ -176,8 +178,6 @@ <&A53_2>, <&A53_3>; }; - - #include "juno-base.dtsi" }; &memtimer { @@ -227,3 +227,15 @@ &gpu1_thermal_zone { status = "okay"; }; + +&etf0_out_port { + remote-endpoint = <&csys2_funnel_in_port0>; +}; + +&replicator_in_port0 { + remote-endpoint = <&csys2_funnel_out_port>; +}; + +&stm_out_port { + remote-endpoint = <&csys1_funnel_in_port0>; +}; diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts index 28f40ec..218d0e4 100644 --- a/arch/arm64/boot/dts/arm/juno-r2.dts +++ b/arch/arm64/boot/dts/arm/juno-r2.dts @@ -9,6 +9,8 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> +#include "juno-base.dtsi" +#include "juno-cs-r1r2.dtsi" / { model = "ARM Juno development board (r2)"; @@ -176,8 +178,6 @@ <&A53_2>, <&A53_3>; }; - - #include "juno-base.dtsi" }; &memtimer { @@ -227,3 +227,15 @@ &gpu1_thermal_zone { status = "okay"; }; + +&etf0_out_port { + remote-endpoint = <&csys2_funnel_in_port0>; +}; + +&replicator_in_port0 { + remote-endpoint = <&csys2_funnel_out_port>; +}; + +&stm_out_port { + remote-endpoint = <&csys1_funnel_in_port0>; +}; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index ac5ceb7..bb2820e 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -9,6 +9,7 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> +#include "juno-base.dtsi" / { model = "ARM Juno development board (r0)"; @@ -176,8 +177,6 @@ <&A53_2>, <&A53_3>; }; - - #include "juno-base.dtsi" }; &etm0 { @@ -203,3 +202,27 @@ &etm5 { cpu = <&A53_3>; }; + +&etf0_out_port { + remote-endpoint = <&replicator_in_port0>; +}; + +&replicator_in_port0 { + remote-endpoint = <&etf0_out_port>; +}; + +&stm_out_port { + remote-endpoint = <&main_funnel_in_port2>; +}; + +&main_funnel { + ports { + port@3 { + reg = <2>; + main_funnel_in_port2: endpoint { + slave-mode; + remote-endpoint = <&stm_out_port>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index 05faf2a..f1caece 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -1,5 +1,5 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb -dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb +dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb ns2-xmc.dtb dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb always := $(dtb-y) diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts index de8d379..5ae0816 100644 --- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts +++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts @@ -76,6 +76,10 @@ status = "ok"; }; +&pcie8 { + status = "ok"; +}; + &i2c0 { status = "ok"; }; diff --git a/arch/arm64/boot/dts/broadcom/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/ns2-xmc.dts new file mode 100644 index 0000000..99a2723 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/ns2-xmc.dts @@ -0,0 +1,191 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "ns2.dtsi" + +/ { + model = "Broadcom NS2 XMC"; + compatible = "brcm,ns2-xmc", "brcm,ns2"; + + aliases { + serial0 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs = "earlycon=uart8250,mmio32,0x66130000"; + }; + + memory { + device_type = "memory"; + reg = <0x000000000 0x80000000 0x00000001 0x00000000>; + }; +}; + +&enet { + status = "ok"; +}; + +&i2c0 { + status = "ok"; +}; + +&i2c1 { + status = "ok"; +}; + +&mdio_mux_iproc { + mdio@10 { + gphy0: eth-phy@10 { + reg = <0x10>; + }; + }; +}; + +&nand { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-bus-width = <16>; + brcm,nand-oob-sector-size = <16>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00280000>; /* 2.5MB */ + read-only; + }; + + partition@280000 { + label = "nenv"; + reg = <0x00280000 0x00040000>; /* 0.25MB */ + read-only; + }; + + partition@2c0000 { + label = "ndtb"; + reg = <0x002c0000 0x00040000>; /* 0.25MB */ + read-only; + }; + + partition@300000 { + label = "nsystem"; + reg = <0x00300000 0x03d00000>; /* 61MB */ + read-only; + }; + + partition@4000000 { + label = "nrootfs"; + reg = <0x04000000 0x06400000>; /* 100MB */ + }; + + partition@0a400000{ + label = "ncustfs"; + reg = <0x0a400000 0x35c00000>; /* 860MB */ + }; + }; +}; + +&pci_phy0 { + status = "ok"; +}; + +&pcie0 { + status = "ok"; +}; + +&pcie8 { + status = "ok"; +}; + +&sata_phy0 { + status = "ok"; +}; + +&sata_phy1 { + status = "ok"; +}; + +&sata { + status = "ok"; +}; + +&qspi { + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + spi-max-frequency = <62500000>; + m25p,default-addr-width = <3>; + reg = <0x0 0x0>; + + partition@0 { + label = "bl0"; + reg = <0x00000000 0x00080000>; /* 512KB */ + }; + + partition@80000 { + label = "fip"; + reg = <0x00080000 0x00150000>; /* 1344KB */ + }; + + partition@1e0000 { + label = "env"; + reg = <0x001e0000 0x00010000>;/* 64KB */ + }; + + partition@1f0000 { + label = "dtb"; + reg = <0x001f0000 0x00010000>; /* 64KB */ + }; + + partition@200000 { + label = "kernel"; + reg = <0x00200000 0x00e00000>; /* 14MB */ + }; + + partition@1000000 { + label = "rootfs"; + reg = <0x01000000 0x01000000>; /* 16MB */ + }; + }; +}; + +&uart3 { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi index 4fcdeca..9f9e203 100644 --- a/arch/arm64/boot/dts/broadcom/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi @@ -30,6 +30,8 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +/memreserve/ 0x81000000 0x00200000; + #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/bcm-ns2.h> @@ -115,7 +117,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 281 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_NONE>; linux,pci-domain = <0>; @@ -136,18 +138,7 @@ phys = <&pci_phy0>; phy-names = "pcie-phy"; - msi-parent = <&msi0>; - msi0: msi@20020000 { - compatible = "brcm,iproc-msi"; - msi-controller; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 277 IRQ_TYPE_NONE>, - <GIC_SPI 278 IRQ_TYPE_NONE>, - <GIC_SPI 279 IRQ_TYPE_NONE>, - <GIC_SPI 280 IRQ_TYPE_NONE>; - brcm,num-eq-region = <1>; - brcm,num-msi-msg-region = <1>; - }; + msi-parent = <&v2m0>; }; pcie4: pcie@50020000 { @@ -156,7 +147,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 305 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_NONE>; linux,pci-domain = <4>; @@ -177,16 +168,24 @@ phys = <&pci_phy1>; phy-names = "pcie-phy"; - msi-parent = <&msi4>; - msi4: msi@50020000 { - compatible = "brcm,iproc-msi"; - msi-controller; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 301 IRQ_TYPE_NONE>, - <GIC_SPI 302 IRQ_TYPE_NONE>, - <GIC_SPI 303 IRQ_TYPE_NONE>, - <GIC_SPI 304 IRQ_TYPE_NONE>; - }; + msi-parent = <&v2m0>; + }; + + pcie8: pcie@60c00000 { + compatible = "brcm,iproc-pcie-paxc"; + reg = <0 0x60c00000 0 0x1000>; + linux,pci-domain = <8>; + + bus-range = <0x0 0x1>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x83000000 0 0x00000000 0 0x60000000 0 0x00c00000>; + + status = "disabled"; + + msi-parent = <&v2m0>; }; soc: soc { @@ -331,6 +330,82 @@ <0x65260000 0x1000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_HIGH)>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x652e0000 0x80000>; + + v2m0: v2m@00000 { + compatible = "arm,gic-v2m-frame"; + interrupt-parent = <&gic>; + msi-controller; + reg = <0x00000 0x1000>; + arm,msi-base-spi = <72>; + arm,msi-num-spis = <16>; + }; + + v2m1: v2m@10000 { + compatible = "arm,gic-v2m-frame"; + interrupt-parent = <&gic>; + msi-controller; + reg = <0x10000 0x1000>; + arm,msi-base-spi = <88>; + arm,msi-num-spis = <16>; + }; + + v2m2: v2m@20000 { + compatible = "arm,gic-v2m-frame"; + interrupt-parent = <&gic>; + msi-controller; + reg = <0x20000 0x1000>; + arm,msi-base-spi = <104>; + arm,msi-num-spis = <16>; + }; + + v2m3: v2m@30000 { + compatible = "arm,gic-v2m-frame"; + interrupt-parent = <&gic>; + msi-controller; + reg = <0x30000 0x1000>; + arm,msi-base-spi = <120>; + arm,msi-num-spis = <16>; + }; + + v2m4: v2m@40000 { + compatible = "arm,gic-v2m-frame"; + interrupt-parent = <&gic>; + msi-controller; + reg = <0x40000 0x1000>; + arm,msi-base-spi = <136>; + arm,msi-num-spis = <16>; + }; + + v2m5: v2m@50000 { + compatible = "arm,gic-v2m-frame"; + interrupt-parent = <&gic>; + msi-controller; + reg = <0x50000 0x1000>; + arm,msi-base-spi = <152>; + arm,msi-num-spis = <16>; + }; + + v2m6: v2m@60000 { + compatible = "arm,gic-v2m-frame"; + interrupt-parent = <&gic>; + msi-controller; + reg = <0x60000 0x1000>; + arm,msi-base-spi = <168>; + arm,msi-num-spis = <16>; + }; + + v2m7: v2m@70000 { + compatible = "arm,gic-v2m-frame"; + interrupt-parent = <&gic>; + msi-controller; + reg = <0x70000 0x1000>; + arm,msi-base-spi = <184>; + arm,msi-num-spis = <16>; + }; }; cci@65590000 { diff --git a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi new file mode 100644 index 0000000..c42dc39 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi @@ -0,0 +1,197 @@ +/* + * Samsung's Exynos5433 SoC Memory interface and AMBA bus device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * Chanwoo Choi <cw00.choi@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&soc { + bus_g2d_400: bus0 { + compatible = "samsung,exynos-bus"; + clocks = <&cmu_top CLK_ACLK_G2D_400>; + clock-names = "bus"; + operating-points-v2 = <&bus_g2d_400_opp_table>; + status = "disabled"; + }; + + bus_g2d_266: bus1 { + compatible = "samsung,exynos-bus"; + clocks = <&cmu_top CLK_ACLK_G2D_266>; + clock-names = "bus"; + operating-points-v2 = <&bus_g2d_266_opp_table>; + status = "disabled"; + }; + + bus_gscl: bus2 { + compatible = "samsung,exynos-bus"; + clocks = <&cmu_top CLK_ACLK_GSCL_333>; + clock-names = "bus"; + operating-points-v2 = <&bus_gscl_opp_table>; + status = "disabled"; + }; + + bus_hevc: bus3 { + compatible = "samsung,exynos-bus"; + clocks = <&cmu_top CLK_ACLK_HEVC_400>; + clock-names = "bus"; + operating-points-v2 = <&bus_hevc_opp_table>; + status = "disabled"; + }; + + bus_jpeg: bus4 { + compatible = "samsung,exynos-bus"; + clocks = <&cmu_top CLK_SCLK_JPEG_MSCL>; + clock-names = "bus"; + operating-points-v2 = <&bus_g2d_400_opp_table>; + status = "disabled"; + }; + + bus_mfc: bus5 { + compatible = "samsung,exynos-bus"; + clocks = <&cmu_top CLK_ACLK_MFC_400>; + clock-names = "bus"; + operating-points-v2 = <&bus_g2d_400_opp_table>; + status = "disabled"; + }; + + bus_mscl: bus6 { + compatible = "samsung,exynos-bus"; + clocks = <&cmu_top CLK_ACLK_MSCL_400>; + clock-names = "bus"; + operating-points-v2 = <&bus_g2d_400_opp_table>; + status = "disabled"; + }; + + bus_noc0: bus7 { + compatible = "samsung,exynos-bus"; + clocks = <&cmu_top CLK_ACLK_BUS0_400>; + clock-names = "bus"; + operating-points-v2 = <&bus_hevc_opp_table>; + status = "disabled"; + }; + + bus_noc1: bus8 { + compatible = "samsung,exynos-bus"; + clocks = <&cmu_top CLK_ACLK_BUS1_400>; + clock-names = "bus"; + operating-points-v2 = <&bus_hevc_opp_table>; + status = "disabled"; + }; + + bus_noc2: bus9 { + compatible = "samsung,exynos-bus"; + clocks = <&cmu_mif CLK_ACLK_BUS2_400>; + clock-names = "bus"; + operating-points-v2 = <&bus_noc2_opp_table>; + status = "disabled"; + }; + + bus_g2d_400_opp_table: opp_table2 { + compatible = "operating-points-v2"; + opp-shared; + + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1075000>; + }; + opp@267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <1000000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <975000>; + }; + opp@160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <962500>; + }; + opp@134000000 { + opp-hz = /bits/ 64 <134000000>; + opp-microvolt = <950000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <937500>; + }; + }; + + bus_g2d_266_opp_table: opp_table3 { + compatible = "operating-points-v2"; + + opp@267000000 { + opp-hz = /bits/ 64 <267000000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + opp@160000000 { + opp-hz = /bits/ 64 <160000000>; + }; + opp@134000000 { + opp-hz = /bits/ 64 <134000000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + }; + + bus_gscl_opp_table: opp_table4 { + compatible = "operating-points-v2"; + + opp@333000000 { + opp-hz = /bits/ 64 <333000000>; + }; + opp@222000000 { + opp-hz = /bits/ 64 <222000000>; + }; + opp@166500000 { + opp-hz = /bits/ 64 <166500000>; + }; + }; + + bus_hevc_opp_table: opp_table5 { + compatible = "operating-points-v2"; + opp-shared; + + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + }; + opp@267000000 { + opp-hz = /bits/ 64 <267000000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + opp@160000000 { + opp-hz = /bits/ 64 <160000000>; + }; + opp@134000000 { + opp-hz = /bits/ 64 <134000000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + }; + + bus_noc2_opp_table: opp_table6 { + compatible = "operating-points-v2"; + + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + opp@134000000 { + opp-hz = /bits/ 64 <134000000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi index ad71247..5040370 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi @@ -12,25 +12,14 @@ * published by the Free Software Foundation. */ -#define PIN_PULL_NONE 0 -#define PIN_PULL_DOWN 1 -#define PIN_PULL_UP 3 - -#define PIN_DRV_LV1 0 -#define PIN_DRV_LV2 2 -#define PIN_DRV_LV3 1 -#define PIN_DRV_LV4 3 - -#define PIN_IN 0 -#define PIN_OUT 1 -#define PIN_FUNC1 2 - -#define PIN(_func, _pin, _pull, _drv) \ - _pin { \ - samsung,pins = #_pin; \ - samsung,pin-function = <PIN_ ##_func>; \ - samsung,pin-pud = <PIN_PULL_ ##_pull>; \ - samsung,pin-drv = <PIN_DRV_ ##_drv>; \ +#include <dt-bindings/pinctrl/samsung.h> + +#define PIN(_func, _pin, _pull, _drv) \ + _pin { \ + samsung,pins = #_pin; \ + samsung,pin-function = <EXYNOS_PIN_FUNC_ ##_func>; \ + samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>; \ + samsung,pin-drv = <EXYNOS5433_PIN_DRV_ ##_drv>; \ } &pinctrl_alive { @@ -145,23 +134,23 @@ i2s0_bus: i2s0-bus { samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3", "gpz0-4", "gpz0-5", "gpz0-6"; - samsung,pin-function = <2>; - samsung,pin-pud = <1>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; pcm0_bus: pcm0-bus { samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3"; - samsung,pin-function = <3>; - samsung,pin-pud = <1>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; uart_aud_bus: uart-aud-bus { samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; }; @@ -196,16 +185,16 @@ spi2_bus: spi2-bus { samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; hs_i2c6_bus: hs-i2c6-bus { samsung,pins = "gpd5-3", "gpd5-2"; - samsung,pin-function = <4>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; }; @@ -260,141 +249,141 @@ sd0_clk: sd0-clk { samsung,pins = "gpr0-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; sd0_cmd: sd0-cmd { samsung,pins = "gpr0-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; sd0_rdqs: sd0-rdqs { samsung,pins = "gpr0-2"; - samsung,pin-function = <2>; - samsung,pin-pud = <1>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; sd0_qrdy: sd0-qrdy { samsung,pins = "gpr0-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <1>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; sd0_bus1: sd0-bus-width1 { samsung,pins = "gpr1-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; sd0_bus4: sd0-bus-width4 { samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; sd0_bus8: sd0-bus-width8 { samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; sd1_clk: sd1-clk { samsung,pins = "gpr2-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; sd1_cmd: sd1-cmd { samsung,pins = "gpr2-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; sd1_bus1: sd1-bus-width1 { samsung,pins = "gpr3-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; sd1_bus4: sd1-bus-width4 { samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; sd1_bus8: sd1-bus-width8 { samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; pcie_bus: pcie_bus { samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; }; sd2_clk: sd2-clk { samsung,pins = "gpr4-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; sd2_cmd: sd2-cmd { samsung,pins = "gpr4-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; sd2_cd: sd2-cd { samsung,pins = "gpr4-2"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; sd2_bus1: sd2-bus-width1 { samsung,pins = "gpr4-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; sd2_bus4: sd2-bus-width4 { samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; }; sd2_clk_output: sd2-clk-output { samsung,pins = "gpr4-0"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <2>; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>; }; sd2_cmd_output: sd2-cmd-output { samsung,pins = "gpr4-1"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <2>; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>; }; }; @@ -419,9 +408,9 @@ hs_i2c4_bus: hs-i2c4-bus { samsung,pins = "gpj0-1", "gpj0-0"; - samsung,pin-function = <4>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; }; @@ -564,225 +553,225 @@ hs_i2c8_bus: hs-i2c8-bus { samsung,pins = "gpb0-1", "gpb0-0"; - samsung,pin-function = <4>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; hs_i2c9_bus: hs-i2c9-bus { samsung,pins = "gpb0-3", "gpb0-2"; - samsung,pin-function = <4>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; i2s1_bus: i2s1-bus { samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2", "gpd4-3", "gpd4-4"; - samsung,pin-function = <2>; - samsung,pin-pud = <1>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; pcm1_bus: pcm1-bus { samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2", "gpd4-3", "gpd4-4"; - samsung,pin-function = <3>; - samsung,pin-pud = <1>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; spdif_bus: spdif-bus { samsung,pins = "gpd4-3", "gpd4-4"; - samsung,pin-function = <4>; - samsung,pin-pud = <1>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; fimc_is_spi_pin0: fimc-is-spi-pin0 { samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; fimc_is_spi_pin1: fimc-is-spi-pin1 { samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; uart0_bus: uart0-bus { samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; hs_i2c2_bus: hs-i2c2-bus { samsung,pins = "gpd0-3", "gpd0-2"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; uart2_bus: uart2-bus { samsung,pins = "gpd1-5", "gpd1-4"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; uart1_bus: uart1-bus { samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; hs_i2c3_bus: hs-i2c3-bus { samsung,pins = "gpd1-3", "gpd1-2"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; hs_i2c0_bus: hs-i2c0-bus { samsung,pins = "gpd2-1", "gpd2-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; hs_i2c1_bus: hs-i2c1-bus { samsung,pins = "gpd2-3", "gpd2-2"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; pwm0_out: pwm0-out { samsung,pins = "gpd2-4"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; pwm1_out: pwm1-out { samsung,pins = "gpd2-5"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; pwm2_out: pwm2-out { samsung,pins = "gpd2-6"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; pwm3_out: pwm3-out { samsung,pins = "gpd2-7"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; spi1_bus: spi1-bus { samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; hs_i2c7_bus: hs-i2c7-bus { samsung,pins = "gpd2-7", "gpd2-6"; - samsung,pin-function = <4>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; spi0_bus: spi0-bus { samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; hs_i2c10_bus: hs-i2c10-bus { samsung,pins = "gpg3-1", "gpg3-0"; - samsung,pin-function = <4>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; hs_i2c11_bus: hs-i2c11-bus { samsung,pins = "gpg3-3", "gpg3-2"; - samsung,pin-function = <4>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; spi3_bus: spi3-bus { samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; spi4_bus: spi4-bus { samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; fimc_is_uart: fimc-is-uart { samsung,pins = "gpc1-1", "gpc0-7"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; fimc_is_ch0_i2c: fimc-is-ch0_i2c { samsung,pins = "gpc2-1", "gpc2-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; fimc_is_ch0_mclk: fimc-is-ch0_mclk { samsung,pins = "gpd7-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; fimc_is_ch1_i2c: fimc-is-ch1-i2c { samsung,pins = "gpc2-3", "gpc2-2"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; fimc_is_ch1_mclk: fimc-is-ch1-mclk { samsung,pins = "gpd7-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; fimc_is_ch2_i2c: fimc-is-ch2-i2c { samsung,pins = "gpc2-5", "gpc2-4"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; fimc_is_ch2_mclk: fimc-is-ch2-mclk { samsung,pins = "gpd7-2"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; }; @@ -797,8 +786,8 @@ hs_i2c5_bus: hs-i2c5-bus { samsung,pins = "gpj1-1", "gpj1-0"; - samsung,pin-function = <4>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi new file mode 100644 index 0000000..53fd068 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -0,0 +1,1203 @@ +/* + * SAMSUNG Exynos5433 TM2 board device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * + * Common device tree source file for Samsung's TM2 and TM2E boards + * which are based on Samsung Exynos5433 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "exynos5433.dtsi" +#include <dt-bindings/clock/samsung,s2mps11.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + aliases { + gsc0 = &gsc_0; + gsc1 = &gsc_1; + gsc2 = &gsc_2; + pinctrl0 = &pinctrl_alive; + pinctrl1 = &pinctrl_aud; + pinctrl2 = &pinctrl_cpif; + pinctrl3 = &pinctrl_ese; + pinctrl4 = &pinctrl_finger; + pinctrl5 = &pinctrl_fsys; + pinctrl6 = &pinctrl_imem; + pinctrl7 = &pinctrl_nfc; + pinctrl8 = &pinctrl_peric; + pinctrl9 = &pinctrl_touch; + serial0 = &serial_0; + serial1 = &serial_1; + serial2 = &serial_2; + serial3 = &serial_3; + spi0 = &spi_0; + spi1 = &spi_1; + spi2 = &spi_2; + spi3 = &spi_3; + spi4 = &spi_4; + mshc0 = &mshc_0; + mshc2 = &mshc_2; + }; + + chosen { + stdout-path = &serial_1; + }; + + memory@20000000 { + device_type = "memory"; + reg = <0x0 0x20000000 0x0 0xc0000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power-key { + gpios = <&gpa2 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "power key"; + debounce-interval = <10>; + }; + + volume-up-key { + gpios = <&gpa2 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + label = "volume-up key"; + debounce-interval = <10>; + }; + + volume-down-key { + gpios = <&gpa2 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + label = "volume-down key"; + debounce-interval = <10>; + }; + + homepage-key { + gpios = <&gpa0 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + label = "homepage key"; + debounce-interval = <10>; + }; + }; + + i2c_max98504: i2c-gpio-0 { + compatible = "i2c-gpio"; + gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */ + &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + max98504: max98504@31 { + compatible = "maxim,max98504"; + reg = <0x31>; + maxim,rx-path = <1>; + maxim,tx-path = <1>; + maxim,tx-channel-mask = <3>; + maxim,tx-channel-source = <2>; + }; + }; + + sound { + compatible = "samsung,tm2-audio"; + audio-codec = <&wm5110>; + i2s-controller = <&i2s0>; + audio-amplifier = <&max98504>; + mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; + model = "wm5110"; + samsung,audio-routing = + /* Headphone */ + "HP", "HPOUT1L", + "HP", "HPOUT1R", + + /* Speaker */ + "SPK", "SPKOUT", + "SPKOUT", "HPOUT2L", + "SPKOUT", "HPOUT2R", + + /* Receiver */ + "RCV", "HPOUT3L", + "RCV", "HPOUT3R"; + status = "okay"; + }; +}; + +&adc { + vdd-supply = <&ldo3_reg>; + status = "okay"; + + thermistor-ap { + compatible = "murata,ncp03wf104"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <0>; + io-channels = <&adc 0>; + }; + + thermistor-battery { + compatible = "murata,ncp03wf104"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <0>; + io-channels = <&adc 1>; + #thermal-sensor-cells = <0>; + }; + + thermistor-charger { + compatible = "murata,ncp03wf104"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <0>; + io-channels = <&adc 2>; + }; +}; + +&bus_g2d_400 { + devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>; + vdd-supply = <&buck4_reg>; + exynos,saturation-ratio = <10>; + status = "okay"; +}; + +&bus_g2d_266 { + devfreq = <&bus_g2d_400>; + status = "okay"; +}; + +&bus_gscl { + devfreq = <&bus_g2d_400>; + status = "okay"; +}; + +&bus_hevc { + devfreq = <&bus_g2d_400>; + status = "okay"; +}; + +&bus_jpeg { + devfreq = <&bus_g2d_400>; + status = "okay"; +}; + +&bus_mfc { + devfreq = <&bus_g2d_400>; + status = "okay"; +}; + +&bus_mscl { + devfreq = <&bus_g2d_400>; + status = "okay"; +}; + +&bus_noc0 { + devfreq = <&bus_g2d_400>; + status = "okay"; +}; + +&bus_noc1 { + devfreq = <&bus_g2d_400>; + status = "okay"; +}; + +&bus_noc2 { + devfreq = <&bus_g2d_400>; + status = "okay"; +}; + +&cmu_aud { + assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>; + assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>; +}; + +&cmu_disp { + assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>, + <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>, + <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>, + <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>; + assigned-clock-parents = <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>, + <0>, + <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, + <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>; + assigned-clock-rates = <0>, <400000000>; +}; + +&cmu_fsys { + assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>, + <&cmu_top CLK_MOUT_SCLK_USBHOST30>, + <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>, + <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>, + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>, + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>, + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>, + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>, + <&cmu_top CLK_DIV_SCLK_USBDRD30>, + <&cmu_top CLK_DIV_SCLK_USBHOST30>; + assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>, + <&cmu_top CLK_MOUT_BUS_PLL_USER>, + <&cmu_top CLK_SCLK_USBDRD30_FSYS>, + <&cmu_top CLK_SCLK_USBHOST30_FSYS>, + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>, + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>, + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>, + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>; + assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>, + <66700000>, <66700000>; +}; + +&cmu_gscl { + assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>, + <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>; + assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>, + <&cmu_top CLK_ACLK_GSCL_333>; +}; + +&cmu_mfc { + assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>; + assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>; +}; + +&cmu_mscl { + assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>, + <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, + <&cmu_mscl CLK_MOUT_SCLK_JPEG>, + <&cmu_top CLK_MOUT_SCLK_JPEG_A>; + assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>, + <&cmu_top CLK_SCLK_JPEG_MSCL>, + <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, + <&cmu_top CLK_MOUT_BUS_PLL_USER>; +}; + +&cpu0 { + cpu-supply = <&buck3_reg>; +}; + +&cpu4 { + cpu-supply = <&buck2_reg>; +}; + +&decon { + status = "okay"; + + i80-if-timings { + }; +}; + +&decon_tv { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + tv_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_tv>; + }; + }; + }; +}; + +&dsi { + status = "okay"; + vddcore-supply = <&ldo6_reg>; + vddio-supply = <&ldo7_reg>; + samsung,pll-clock-frequency = <24000000>; + pinctrl-names = "default"; + pinctrl-0 = <&te_irq>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dsi_out: endpoint { + samsung,burst-clock-frequency = <512000000>; + samsung,esc-clock-frequency = <16000000>; + }; + }; + }; +}; + +&hdmi { + hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>; + status = "okay"; + vdd-supply = <&ldo6_reg>; + vdd_osc-supply = <&ldo7_reg>; + vdd_pll-supply = <&ldo6_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + hdmi_to_tv: endpoint { + remote-endpoint = <&tv_to_hdmi>; + }; + }; + + port@1 { + reg = <1>; + hdmi_to_mhl: endpoint { + remote-endpoint = <&mhl_to_hdmi>; + }; + }; + }; +}; + +&hsi2c_0 { + status = "okay"; + clock-frequency = <2500000>; + + s2mps13-pmic@66 { + compatible = "samsung,s2mps13-pmic"; + interrupt-parent = <&gpa0>; + interrupts = <7 IRQ_TYPE_NONE>; + reg = <0x66>; + samsung,s2mps11-wrstbi-ground; + + s2mps13_osc: clocks { + compatible = "samsung,s2mps13-clk"; + #clock-cells = <1>; + clock-output-names = "s2mps13_ap", "s2mps13_cp", + "s2mps13_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_0.9V_AP"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDDQ_MMC2_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo3_reg: LDO3 { + regulator-name = "VDD1_E_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDD10_MIF_PLL_1.0V_AP"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo5_reg: LDO5 { + regulator-name = "VDD10_DPLL_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD10_MIPI2L_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD18_MIPI2L_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo8_reg: LDO8 { + regulator-name = "VDD18_LLI_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo9_reg: LDO9 { + regulator-name = "VDD18_ABB_ETC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD33_USB30_3.0V_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD_INT_M_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD_KFC_M_1.1V_AP"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "VDD_G3D_M_0.95V_AP"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo14_reg: LDO14 { + regulator-name = "VDDQ_M1_LDO_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo15_reg: LDO15 { + regulator-name = "VDDQ_M2_LDO_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo16_reg: LDO16 { + regulator-name = "VDDQ_EFUSE"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <3400000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "V_TFLASH_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo18_reg: LDO18 { + regulator-name = "V_CODEC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "VDDA_1.8V_COMP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo20_reg: LDO20 { + regulator-name = "VCC_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo22_reg: LDO22 { + regulator-name = "CAM_IO_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo23_reg: LDO23 { + regulator-name = "CAM_SEN_CORE_1.05V_AP"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo24_reg: LDO24 { + regulator-name = "VT_CAM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo25_reg: LDO25 { + regulator-name = "UNUSED_LDO25"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo26_reg: LDO26 { + regulator-name = "CAM_AF_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo27_reg: LDO27 { + regulator-name = "VCC_3.0V_LCD_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo28_reg: LDO28 { + regulator-name = "VCC_1.8V_LCD_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo29_reg: LDO29 { + regulator-name = "VT_CAM_2.8V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo30_reg: LDO30 { + regulator-name = "TSP_AVDD_3.3V_AP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo31_reg: LDO31 { + /* + * LDO31 differs from target to target, + * its definition is in the .dts + */ + }; + + ldo32_reg: LDO32 { + regulator-name = "VTOUCH_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo33_reg: LDO33 { + regulator-name = "VTOUCH_LED_3.3V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + }; + + ldo34_reg: LDO34 { + regulator-name = "VCC_1.8V_MHL_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <2100000>; + }; + + ldo35_reg: LDO35 { + regulator-name = "OIS_VM_2.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo36_reg: LDO36 { + regulator-name = "VSIL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo37_reg: LDO37 { + regulator-name = "VF_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo38_reg: LDO38 { + /* + * LDO38 differs from target to target, + * its definition is in the .dts + */ + }; + + ldo39_reg: LDO39 { + regulator-name = "V_HRM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo40_reg: LDO40 { + regulator-name = "V_HRM_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_MIF_0.9V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck2_reg: BUCK2 { + regulator-name = "VDD_EGL_1.0V_AP"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck3_reg: BUCK3 { + regulator-name = "VDD_KFC_1.0V_AP"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck4_reg: BUCK4 { + regulator-name = "VDD_INT_0.95V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDD_DISP_CAM0_0.9V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck6_reg: BUCK6 { + regulator-name = "VDD_G3D_0.9V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck7_reg: BUCK7 { + regulator-name = "VDD_MEM1_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "VDD_LLDO_1.35V_AP"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "VDD_MLDO_2.0V_AP"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_mem2"; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + }; + }; +}; + +&hsi2c_7 { + status = "okay"; + + sii8620@39 { + reg = <0x39>; + compatible = "sil,sii8620"; + cvcc10-supply = <&ldo36_reg>; + iovcc18-supply = <&ldo34_reg>; + interrupt-parent = <&gpf0>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>; + clocks = <&pmu_system_controller 0>; + clock-names = "xtal"; + + port { + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + }; +}; + +&hsi2c_8 { + status = "okay"; + + max77843@66 { + compatible = "maxim,max77843"; + interrupt-parent = <&gpa1>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reg = <0x66>; + + muic: max77843-muic { + compatible = "maxim,max77843-muic"; + }; + + regulators { + compatible = "maxim,max77843-regulator"; + safeout1_reg: SAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + safeout2_reg: SAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + charger_reg: CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <100000>; + regulator-max-microamp = <3150000>; + }; + }; + + haptic: max77843-haptic { + compatible = "maxim,max77843-haptic"; + haptic-supply = <&ldo38_reg>; + pwms = <&pwm 0 33670 0>; + pwm-names = "haptic"; + }; + }; +}; + +&hsi2c_11 { + status = "okay"; +}; + +&i2s0 { + status = "okay"; +}; + +&mshc_0 { + status = "okay"; + num-slots = <1>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-highspeed; + non-removable; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 3>; + samsung,read-strobe-delay = <90>; + fifo-depth = <0x80>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 + &sd0_bus8 &sd0_rdqs>; + bus-width = <8>; + assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>; + assigned-clock-rates = <800000000>; +}; + +&mshc_2 { + status = "okay"; + num-slots = <1>; + cap-sd-highspeed; + disable-wp; + cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>; + cd-inverted; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + fifo-depth = <0x80>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; +}; + +&ppmu_d0_general { + status = "okay"; + events { + ppmu_event0_d0_general: ppmu-event0-d0-general { + event-name = "ppmu-event0-d0-general"; + }; + }; +}; + +&ppmu_d1_general { + status = "okay"; + events { + ppmu_event0_d1_general: ppmu-event0-d1-general { + event-name = "ppmu-event0-d1-general"; + }; + }; +}; + +&pinctrl_alive { + pinctrl-names = "default"; + pinctrl-0 = <&initial_alive>; + + initial_alive: initial-state { + PIN(INPUT, gpa0-0, DOWN, FAST_SR1); + PIN(INPUT, gpa0-1, NONE, FAST_SR1); + PIN(INPUT, gpa0-2, DOWN, FAST_SR1); + PIN(INPUT, gpa0-3, NONE, FAST_SR1); + PIN(INPUT, gpa0-4, NONE, FAST_SR1); + PIN(INPUT, gpa0-5, DOWN, FAST_SR1); + PIN(INPUT, gpa0-6, NONE, FAST_SR1); + PIN(INPUT, gpa0-7, NONE, FAST_SR1); + + PIN(INPUT, gpa1-0, UP, FAST_SR1); + PIN(INPUT, gpa1-1, NONE, FAST_SR1); + PIN(INPUT, gpa1-2, NONE, FAST_SR1); + PIN(INPUT, gpa1-3, DOWN, FAST_SR1); + PIN(INPUT, gpa1-4, DOWN, FAST_SR1); + PIN(INPUT, gpa1-5, NONE, FAST_SR1); + PIN(INPUT, gpa1-6, NONE, FAST_SR1); + PIN(INPUT, gpa1-7, NONE, FAST_SR1); + + PIN(INPUT, gpa2-0, NONE, FAST_SR1); + PIN(INPUT, gpa2-1, NONE, FAST_SR1); + PIN(INPUT, gpa2-2, NONE, FAST_SR1); + PIN(INPUT, gpa2-3, DOWN, FAST_SR1); + PIN(INPUT, gpa2-4, NONE, FAST_SR1); + PIN(INPUT, gpa2-5, DOWN, FAST_SR1); + PIN(INPUT, gpa2-6, DOWN, FAST_SR1); + PIN(INPUT, gpa2-7, NONE, FAST_SR1); + + PIN(INPUT, gpa3-0, DOWN, FAST_SR1); + PIN(INPUT, gpa3-1, DOWN, FAST_SR1); + PIN(INPUT, gpa3-2, NONE, FAST_SR1); + PIN(INPUT, gpa3-3, DOWN, FAST_SR1); + PIN(INPUT, gpa3-4, NONE, FAST_SR1); + PIN(INPUT, gpa3-5, DOWN, FAST_SR1); + PIN(INPUT, gpa3-6, DOWN, FAST_SR1); + PIN(INPUT, gpa3-7, DOWN, FAST_SR1); + + PIN(INPUT, gpf1-0, NONE, FAST_SR1); + PIN(INPUT, gpf1-1, NONE, FAST_SR1); + PIN(INPUT, gpf1-2, DOWN, FAST_SR1); + PIN(INPUT, gpf1-4, UP, FAST_SR1); + PIN(OUTPUT, gpf1-5, NONE, FAST_SR1); + PIN(INPUT, gpf1-6, DOWN, FAST_SR1); + PIN(INPUT, gpf1-7, DOWN, FAST_SR1); + + PIN(INPUT, gpf2-0, DOWN, FAST_SR1); + PIN(INPUT, gpf2-1, DOWN, FAST_SR1); + PIN(INPUT, gpf2-2, DOWN, FAST_SR1); + PIN(INPUT, gpf2-3, DOWN, FAST_SR1); + + PIN(INPUT, gpf3-0, DOWN, FAST_SR1); + PIN(INPUT, gpf3-1, DOWN, FAST_SR1); + PIN(INPUT, gpf3-2, NONE, FAST_SR1); + PIN(INPUT, gpf3-3, DOWN, FAST_SR1); + + PIN(INPUT, gpf4-0, DOWN, FAST_SR1); + PIN(INPUT, gpf4-1, DOWN, FAST_SR1); + PIN(INPUT, gpf4-2, DOWN, FAST_SR1); + PIN(INPUT, gpf4-3, DOWN, FAST_SR1); + PIN(INPUT, gpf4-4, DOWN, FAST_SR1); + PIN(INPUT, gpf4-5, DOWN, FAST_SR1); + PIN(INPUT, gpf4-6, DOWN, FAST_SR1); + PIN(INPUT, gpf4-7, DOWN, FAST_SR1); + + PIN(INPUT, gpf5-0, DOWN, FAST_SR1); + PIN(INPUT, gpf5-1, DOWN, FAST_SR1); + PIN(INPUT, gpf5-2, DOWN, FAST_SR1); + PIN(INPUT, gpf5-3, DOWN, FAST_SR1); + PIN(OUTPUT, gpf5-4, NONE, FAST_SR1); + PIN(INPUT, gpf5-5, DOWN, FAST_SR1); + PIN(INPUT, gpf5-6, DOWN, FAST_SR1); + PIN(INPUT, gpf5-7, DOWN, FAST_SR1); + }; + + te_irq: te_irq { + samsung,pins = "gpf1-3"; + samsung,pin-function = <0xf>; + }; +}; + +&pinctrl_cpif { + pinctrl-names = "default"; + pinctrl-0 = <&initial_cpif>; + + initial_cpif: initial-state { + PIN(INPUT, gpv6-0, DOWN, FAST_SR1); + PIN(INPUT, gpv6-1, DOWN, FAST_SR1); + }; +}; + +&pinctrl_ese { + pinctrl-names = "default"; + pinctrl-0 = <&initial_ese>; + + initial_ese: initial-state { + PIN(INPUT, gpj2-0, DOWN, FAST_SR1); + PIN(INPUT, gpj2-1, DOWN, FAST_SR1); + PIN(INPUT, gpj2-2, DOWN, FAST_SR1); + }; +}; + +&pinctrl_fsys { + pinctrl-names = "default"; + pinctrl-0 = <&initial_fsys>; + + initial_fsys: initial-state { + PIN(INPUT, gpr3-0, NONE, FAST_SR1); + PIN(INPUT, gpr3-1, DOWN, FAST_SR1); + PIN(INPUT, gpr3-2, DOWN, FAST_SR1); + PIN(INPUT, gpr3-3, DOWN, FAST_SR1); + PIN(INPUT, gpr3-7, NONE, FAST_SR1); + }; +}; + +&pinctrl_imem { + pinctrl-names = "default"; + pinctrl-0 = <&initial_imem>; + + initial_imem: initial-state { + PIN(INPUT, gpf0-0, UP, FAST_SR1); + PIN(INPUT, gpf0-1, UP, FAST_SR1); + PIN(INPUT, gpf0-2, DOWN, FAST_SR1); + PIN(INPUT, gpf0-3, UP, FAST_SR1); + PIN(INPUT, gpf0-4, DOWN, FAST_SR1); + PIN(INPUT, gpf0-5, NONE, FAST_SR1); + PIN(INPUT, gpf0-6, DOWN, FAST_SR1); + PIN(INPUT, gpf0-7, UP, FAST_SR1); + }; +}; + +&pinctrl_nfc { + pinctrl-names = "default"; + pinctrl-0 = <&initial_nfc>; + + initial_nfc: initial-state { + PIN(INPUT, gpj0-2, DOWN, FAST_SR1); + }; +}; + +&pinctrl_peric { + pinctrl-names = "default"; + pinctrl-0 = <&initial_peric>; + + initial_peric: initial-state { + PIN(INPUT, gpv7-0, DOWN, FAST_SR1); + PIN(INPUT, gpv7-1, DOWN, FAST_SR1); + PIN(INPUT, gpv7-2, NONE, FAST_SR1); + PIN(INPUT, gpv7-3, DOWN, FAST_SR1); + PIN(INPUT, gpv7-4, DOWN, FAST_SR1); + PIN(INPUT, gpv7-5, DOWN, FAST_SR1); + + PIN(INPUT, gpb0-4, DOWN, FAST_SR1); + + PIN(INPUT, gpc0-2, DOWN, FAST_SR1); + PIN(INPUT, gpc0-5, DOWN, FAST_SR1); + PIN(INPUT, gpc0-7, DOWN, FAST_SR1); + + PIN(INPUT, gpc1-1, DOWN, FAST_SR1); + + PIN(INPUT, gpc3-4, NONE, FAST_SR1); + PIN(INPUT, gpc3-5, NONE, FAST_SR1); + PIN(INPUT, gpc3-6, NONE, FAST_SR1); + PIN(INPUT, gpc3-7, NONE, FAST_SR1); + + PIN(OUTPUT, gpg0-0, NONE, FAST_SR1); + PIN(2, gpg0-1, DOWN, FAST_SR1); + + PIN(INPUT, gpd2-5, DOWN, FAST_SR1); + + PIN(INPUT, gpd4-0, NONE, FAST_SR1); + PIN(INPUT, gpd4-1, DOWN, FAST_SR1); + PIN(INPUT, gpd4-2, DOWN, FAST_SR1); + PIN(INPUT, gpd4-3, DOWN, FAST_SR1); + PIN(INPUT, gpd4-4, DOWN, FAST_SR1); + + PIN(INPUT, gpd6-3, DOWN, FAST_SR1); + + PIN(INPUT, gpd8-1, UP, FAST_SR1); + + PIN(INPUT, gpg1-0, DOWN, FAST_SR1); + PIN(INPUT, gpg1-1, DOWN, FAST_SR1); + PIN(INPUT, gpg1-2, DOWN, FAST_SR1); + PIN(INPUT, gpg1-3, DOWN, FAST_SR1); + PIN(INPUT, gpg1-4, DOWN, FAST_SR1); + + PIN(INPUT, gpg2-0, DOWN, FAST_SR1); + PIN(INPUT, gpg2-1, DOWN, FAST_SR1); + + PIN(INPUT, gpg3-0, DOWN, FAST_SR1); + PIN(INPUT, gpg3-1, DOWN, FAST_SR1); + PIN(INPUT, gpg3-5, DOWN, FAST_SR1); + PIN(INPUT, gpg3-7, DOWN, FAST_SR1); + }; +}; + +&pinctrl_touch { + pinctrl-names = "default"; + pinctrl-0 = <&initial_touch>; + + initial_touch: initial-state { + PIN(INPUT, gpj1-2, DOWN, FAST_SR1); + }; +}; + +&pwm { + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&mic { + status = "okay"; + + i80-if-timings { + }; +}; + +&pmu_system_controller { + assigned-clocks = <&pmu_system_controller 0>; + assigned-clock-parents = <&xxti>; +}; + +&serial_1 { + status = "okay"; +}; + +&spi_1 { + cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; + status = "okay"; + + wm5110: wm5110-codec@0 { + compatible = "wlf,wm5110"; + reg = <0x0>; + spi-max-frequency = <20000000>; + interrupt-parent = <&gpa0>; + interrupts = <4 IRQ_TYPE_NONE>; + clocks = <&pmu_system_controller 0>, + <&s2mps13_osc S2MPS11_CLK_BT>; + clock-names = "mclk1", "mclk2"; + + gpio-controller; + #gpio-cells = <2>; + + wlf,micd-detect-debounce = <300>; + wlf,micd-bias-start-time = <0x1>; + wlf,micd-rate = <0x7>; + wlf,micd-dbtime = <0x1>; + wlf,micd-force-micbias; + wlf,micd-configs = <0x0 1 0>; + wlf,hpdet-channel = <1>; + wlf,gpsw = <0x1>; + wlf,inmode = <2 0 2 0>; + + wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>; + wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>; + + /* core supplies */ + AVDD-supply = <&ldo18_reg>; + DBVDD1-supply = <&ldo18_reg>; + CPVDD-supply = <&ldo18_reg>; + DBVDD2-supply = <&ldo18_reg>; + DBVDD3-supply = <&ldo18_reg>; + + controller-data { + samsung,spi-feedback-delay = <0>; + }; + }; +}; + +&timer { + clock-frequency = <24000000>; +}; + +&tmu_atlas0 { + vtmu-supply = <&ldo3_reg>; + status = "okay"; +}; + +&tmu_apollo { + vtmu-supply = <&ldo3_reg>; + status = "okay"; +}; + +&tmu_g3d { + vtmu-supply = <&ldo3_reg>; + status = "okay"; +}; + +&usbdrd30 { + vdd33-supply = <&ldo10_reg>; + vdd10-supply = <&ldo6_reg>; + status = "okay"; +}; + +&usbdrd_dwc3_0 { + dr_mode = "otg"; +}; + +&usbdrd30_phy { + vbus-supply = <&safeout1_reg>; + status = "okay"; +}; + +&xxti { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index f21bdc2..ddba2f8 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -11,1039 +11,34 @@ * published by the Free Software Foundation. */ -/dts-v1/; -#include "exynos5433.dtsi" -#include <dt-bindings/clock/samsung,s2mps11.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> +#include "exynos5433-tm2-common.dtsi" / { model = "Samsung TM2 board"; compatible = "samsung,tm2", "samsung,exynos5433"; - - aliases { - gsc0 = &gsc_0; - gsc1 = &gsc_1; - gsc2 = &gsc_2; - pinctrl0 = &pinctrl_alive; - pinctrl1 = &pinctrl_aud; - pinctrl2 = &pinctrl_cpif; - pinctrl3 = &pinctrl_ese; - pinctrl4 = &pinctrl_finger; - pinctrl5 = &pinctrl_fsys; - pinctrl6 = &pinctrl_imem; - pinctrl7 = &pinctrl_nfc; - pinctrl8 = &pinctrl_peric; - pinctrl9 = &pinctrl_touch; - serial0 = &serial_0; - serial1 = &serial_1; - serial2 = &serial_2; - serial3 = &serial_3; - spi0 = &spi_0; - spi1 = &spi_1; - spi2 = &spi_2; - spi3 = &spi_3; - spi4 = &spi_4; - mshc0 = &mshc_0; - mshc2 = &mshc_2; - }; - - chosen { - stdout-path = &serial_1; - }; - - memory@20000000 { - device_type = "memory"; - reg = <0x0 0x20000000 0x0 0xc0000000>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - power-key { - gpios = <&gpa2 7 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - label = "power key"; - debounce-interval = <10>; - }; - - volume-up-key { - gpios = <&gpa2 0 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEUP>; - label = "volume-up key"; - debounce-interval = <10>; - }; - - volume-down-key { - gpios = <&gpa2 1 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEDOWN>; - label = "volume-down key"; - debounce-interval = <10>; - }; - - homepage-key { - gpios = <&gpa0 3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_MENU>; - label = "homepage key"; - debounce-interval = <10>; - }; - }; - - i2c_max98504: i2c-gpio-0 { - compatible = "i2c-gpio"; - gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */ - &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - max98504: max98504@31 { - compatible = "maxim,max98504"; - reg = <0x31>; - maxim,rx-path = <1>; - maxim,tx-path = <1>; - maxim,tx-channel-mask = <3>; - maxim,tx-channel-source = <2>; - }; - }; - - sound { - compatible = "samsung,tm2-audio"; - audio-codec = <&wm5110>; - i2s-controller = <&i2s0>; - audio-amplifier = <&max98504>; - mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; - model = "wm5110"; - samsung,audio-routing = - /* Headphone */ - "HP", "HPOUT1L", - "HP", "HPOUT1R", - - /* Speaker */ - "SPK", "SPKOUT", - "SPKOUT", "HPOUT2L", - "SPKOUT", "HPOUT2R", - - /* Receiver */ - "RCV", "HPOUT3L", - "RCV", "HPOUT3R"; - status = "okay"; - }; -}; - -&adc { - vdd-supply = <&ldo3_reg>; - status = "okay"; - - thermistor-ap { - compatible = "murata,ncp03wf104"; - pullup-uv = <1800000>; - pullup-ohm = <100000>; - pulldown-ohm = <0>; - io-channels = <&adc 0>; - }; - - thermistor-battery { - compatible = "murata,ncp03wf104"; - pullup-uv = <1800000>; - pullup-ohm = <100000>; - pulldown-ohm = <0>; - io-channels = <&adc 1>; - #thermal-sensor-cells = <0>; - }; - - thermistor-charger { - compatible = "murata,ncp03wf104"; - pullup-uv = <1800000>; - pullup-ohm = <100000>; - pulldown-ohm = <0>; - io-channels = <&adc 2>; - }; -}; - -&cmu_aud { - assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>; - assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>; -}; - -&cmu_fsys { - assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>, - <&cmu_top CLK_MOUT_SCLK_USBHOST30>, - <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>, - <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>, - <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>, - <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>, - <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>, - <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>, - <&cmu_top CLK_DIV_SCLK_USBDRD30>, - <&cmu_top CLK_DIV_SCLK_USBHOST30>; - assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>, - <&cmu_top CLK_MOUT_BUS_PLL_USER>, - <&cmu_top CLK_SCLK_USBDRD30_FSYS>, - <&cmu_top CLK_SCLK_USBHOST30_FSYS>, - <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>, - <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>, - <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>, - <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>; - assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>, - <66700000>, <66700000>; -}; - -&cmu_gscl { - assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>, - <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>; - assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>, - <&cmu_top CLK_ACLK_GSCL_333>; -}; - -&cmu_mfc { - assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>; - assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>; -}; - -&cmu_mscl { - assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>, - <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, - <&cmu_mscl CLK_MOUT_SCLK_JPEG>, - <&cmu_top CLK_MOUT_SCLK_JPEG_A>; - assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>, - <&cmu_top CLK_SCLK_JPEG_MSCL>, - <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, - <&cmu_top CLK_MOUT_BUS_PLL_USER>; -}; - -&cpu0 { - cpu-supply = <&buck3_reg>; -}; - -&cpu4 { - cpu-supply = <&buck2_reg>; -}; - -&decon { - status = "okay"; - - i80-if-timings { - }; -}; - -&dsi { - status = "okay"; - vddcore-supply = <&ldo6_reg>; - vddio-supply = <&ldo7_reg>; - samsung,pll-clock-frequency = <24000000>; - pinctrl-names = "default"; - pinctrl-0 = <&te_irq>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - dsi_out: endpoint { - samsung,burst-clock-frequency = <512000000>; - samsung,esc-clock-frequency = <16000000>; - }; - }; - }; -}; - -&hsi2c_0 { - status = "okay"; - clock-frequency = <2500000>; - - s2mps13-pmic@66 { - compatible = "samsung,s2mps13-pmic"; - interrupt-parent = <&gpa0>; - interrupts = <7 IRQ_TYPE_NONE>; - reg = <0x66>; - samsung,s2mps11-wrstbi-ground; - - s2mps13_osc: clocks { - compatible = "samsung,s2mps13-clk"; - #clock-cells = <1>; - clock-output-names = "s2mps13_ap", "s2mps13_cp", - "s2mps13_bt"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE_0.9V_AP"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDDQ_MMC2_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo3_reg: LDO3 { - regulator-name = "VDD1_E_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: LDO4 { - regulator-name = "VDD10_MIF_PLL_1.0V_AP"; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo5_reg: LDO5 { - regulator-name = "VDD10_DPLL_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo6_reg: LDO6 { - regulator-name = "VDD10_MIPI2L_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo7_reg: LDO7 { - regulator-name = "VDD18_MIPI2L_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo8_reg: LDO8 { - regulator-name = "VDD18_LLI_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo9_reg: LDO9 { - regulator-name = "VDD18_ABB_ETC_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo10_reg: LDO10 { - regulator-name = "VDD33_USB30_3.0V_AP"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo11_reg: LDO11 { - regulator-name = "VDD_INT_M_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo12_reg: LDO12 { - regulator-name = "VDD_KFC_M_1.1V_AP"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - }; - - ldo13_reg: LDO13 { - regulator-name = "VDD_G3D_M_0.95V_AP"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <950000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo14_reg: LDO14 { - regulator-name = "VDDQ_M1_LDO_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo15_reg: LDO15 { - regulator-name = "VDDQ_M2_LDO_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo16_reg: LDO16 { - regulator-name = "VDDQ_EFUSE"; - regulator-min-microvolt = <1400000>; - regulator-max-microvolt = <3400000>; - regulator-always-on; - }; - - ldo17_reg: LDO17 { - regulator-name = "V_TFLASH_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo18_reg: LDO18 { - regulator-name = "V_CODEC_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo19_reg: LDO19 { - regulator-name = "VDDA_1.8V_COMP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo20_reg: LDO20 { - regulator-name = "VCC_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo21_reg: LDO21 { - regulator-name = "VT_CAM_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo22_reg: LDO22 { - regulator-name = "CAM_IO_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo23_reg: LDO23 { - regulator-name = "CAM_SEN_CORE_1.2V_AP"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1200000>; - }; - - ldo24_reg: LDO24 { - regulator-name = "VT_CAM_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo25_reg: LDO25 { - regulator-name = "CAM_SEN_A2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo26_reg: LDO26 { - regulator-name = "CAM_AF_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo27_reg: LDO27 { - regulator-name = "VCC_3.0V_LCD_AP"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo28_reg: LDO28 { - regulator-name = "VCC_1.8V_LCD_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo29_reg: LDO29 { - regulator-name = "VT_CAM_2.8V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo30_reg: LDO30 { - regulator-name = "TSP_AVDD_3.3V_AP"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo31_reg: LDO31 { - regulator-name = "TSP_VDD_1.85V_AP"; - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <1850000>; - }; - - ldo32_reg: LDO32 { - regulator-name = "VTOUCH_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo33_reg: LDO33 { - regulator-name = "VTOUCH_LED_3.3V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - regulator-ramp-delay = <12500>; - }; - - ldo34_reg: LDO34 { - regulator-name = "VCC_1.8V_MHL_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <2100000>; - }; - - ldo35_reg: LDO35 { - regulator-name = "OIS_VM_2.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo36_reg: LDO36 { - regulator-name = "VSIL_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - ldo37_reg: LDO37 { - regulator-name = "VF_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo38_reg: LDO38 { - regulator-name = "VCC_3.0V_MOTOR_AP"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo39_reg: LDO39 { - regulator-name = "V_HRM_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo40_reg: LDO40 { - regulator-name = "V_HRM_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - buck1_reg: BUCK1 { - regulator-name = "VDD_MIF_0.9V_AP"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck2_reg: BUCK2 { - regulator-name = "VDD_EGL_1.0V_AP"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck3_reg: BUCK3 { - regulator-name = "VDD_KFC_1.0V_AP"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck4_reg: BUCK4 { - regulator-name = "VDD_INT_0.95V_AP"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck5_reg: BUCK5 { - regulator-name = "VDD_DISP_CAM0_0.9V_AP"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck6_reg: BUCK6 { - regulator-name = "VDD_G3D_0.9V_AP"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck7_reg: BUCK7 { - regulator-name = "VDD_MEM1_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "VDD_LLDO_1.35V_AP"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - buck9_reg: BUCK9 { - regulator-name = "VDD_MLDO_2.0V_AP"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - buck10_reg: BUCK10 { - regulator-name = "vdd_mem2"; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - }; - }; - }; }; -&hsi2c_8 { +&hsi2c_9 { status = "okay"; - max77843@66 { - compatible = "maxim,max77843"; - interrupt-parent = <&gpa1>; - interrupts = <5 IRQ_TYPE_EDGE_FALLING>; - reg = <0x66>; - - muic: max77843-muic { - compatible = "maxim,max77843-muic"; - }; - - regulators { - compatible = "maxim,max77843-regulator"; - safeout1_reg: SAFEOUT1 { - regulator-name = "SAFEOUT1"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <4950000>; - }; - - safeout2_reg: SAFEOUT2 { - regulator-name = "SAFEOUT2"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <4950000>; - }; - - charger_reg: CHARGER { - regulator-name = "CHARGER"; - regulator-min-microamp = <100000>; - regulator-max-microamp = <3150000>; - }; - }; - - haptic: max77843-haptic { - compatible = "maxim,max77843-haptic"; - haptic-supply = <&ldo38_reg>; - pwms = <&pwm 0 33670 0>; - pwm-names = "haptic"; - }; + touchkey@20 { + compatible = "cypress,tm2-touchkey"; + reg = <0x20>; + interrupt-parent = <&gpa3>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + vcc-supply = <&ldo32_reg>; + vdd-supply = <&ldo33_reg>; }; }; -&i2s0 { - status = "okay"; -}; - -&mshc_0 { - status = "okay"; - num-slots = <1>; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - cap-mmc-highspeed; - non-removable; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - samsung,dw-mshc-hs400-timing = <0 3>; - samsung,read-strobe-delay = <90>; - fifo-depth = <0x80>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 - &sd0_bus8 &sd0_rdqs>; - bus-width = <8>; - assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>; - assigned-clock-rates = <800000000>; -}; - -&mshc_2 { - status = "okay"; - num-slots = <1>; - cap-sd-highspeed; - disable-wp; - cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>; - cd-inverted; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - fifo-depth = <0x80>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; - bus-width = <4>; -}; - -&pinctrl_alive { - pinctrl-names = "default"; - pinctrl-0 = <&initial_alive>; - - initial_alive: initial-state { - PIN(IN, gpa0-0, DOWN, LV1); - PIN(IN, gpa0-1, NONE, LV1); - PIN(IN, gpa0-2, DOWN, LV1); - PIN(IN, gpa0-3, NONE, LV1); - PIN(IN, gpa0-4, NONE, LV1); - PIN(IN, gpa0-5, DOWN, LV1); - PIN(IN, gpa0-6, NONE, LV1); - PIN(IN, gpa0-7, NONE, LV1); - - PIN(IN, gpa1-0, UP, LV1); - PIN(IN, gpa1-1, NONE, LV1); - PIN(IN, gpa1-2, NONE, LV1); - PIN(IN, gpa1-3, DOWN, LV1); - PIN(IN, gpa1-4, DOWN, LV1); - PIN(IN, gpa1-5, NONE, LV1); - PIN(IN, gpa1-6, NONE, LV1); - PIN(IN, gpa1-7, NONE, LV1); - - PIN(IN, gpa2-0, NONE, LV1); - PIN(IN, gpa2-1, NONE, LV1); - PIN(IN, gpa2-2, NONE, LV1); - PIN(IN, gpa2-3, DOWN, LV1); - PIN(IN, gpa2-4, NONE, LV1); - PIN(IN, gpa2-5, DOWN, LV1); - PIN(IN, gpa2-6, DOWN, LV1); - PIN(IN, gpa2-7, NONE, LV1); - - PIN(IN, gpa3-0, DOWN, LV1); - PIN(IN, gpa3-1, DOWN, LV1); - PIN(IN, gpa3-2, NONE, LV1); - PIN(IN, gpa3-3, DOWN, LV1); - PIN(IN, gpa3-4, NONE, LV1); - PIN(IN, gpa3-5, DOWN, LV1); - PIN(IN, gpa3-6, DOWN, LV1); - PIN(IN, gpa3-7, DOWN, LV1); - - PIN(IN, gpf1-0, NONE, LV1); - PIN(IN, gpf1-1, NONE, LV1); - PIN(IN, gpf1-2, DOWN, LV1); - PIN(IN, gpf1-4, UP, LV1); - PIN(OUT, gpf1-5, NONE, LV1); - PIN(IN, gpf1-6, DOWN, LV1); - PIN(IN, gpf1-7, DOWN, LV1); - - PIN(IN, gpf2-0, DOWN, LV1); - PIN(IN, gpf2-1, DOWN, LV1); - PIN(IN, gpf2-2, DOWN, LV1); - PIN(IN, gpf2-3, DOWN, LV1); - - PIN(IN, gpf3-0, DOWN, LV1); - PIN(IN, gpf3-1, DOWN, LV1); - PIN(IN, gpf3-2, NONE, LV1); - PIN(IN, gpf3-3, DOWN, LV1); - - PIN(IN, gpf4-0, DOWN, LV1); - PIN(IN, gpf4-1, DOWN, LV1); - PIN(IN, gpf4-2, DOWN, LV1); - PIN(IN, gpf4-3, DOWN, LV1); - PIN(IN, gpf4-4, DOWN, LV1); - PIN(IN, gpf4-5, DOWN, LV1); - PIN(IN, gpf4-6, DOWN, LV1); - PIN(IN, gpf4-7, DOWN, LV1); - - PIN(IN, gpf5-0, DOWN, LV1); - PIN(IN, gpf5-1, DOWN, LV1); - PIN(IN, gpf5-2, DOWN, LV1); - PIN(IN, gpf5-3, DOWN, LV1); - PIN(OUT, gpf5-4, NONE, LV1); - PIN(IN, gpf5-5, DOWN, LV1); - PIN(IN, gpf5-6, DOWN, LV1); - PIN(IN, gpf5-7, DOWN, LV1); - }; - - te_irq: te_irq { - samsung,pins = "gpf1-3"; - samsung,pin-function = <0xf>; - }; -}; - -&pinctrl_cpif { - pinctrl-names = "default"; - pinctrl-0 = <&initial_cpif>; - - initial_cpif: initial-state { - PIN(IN, gpv6-0, DOWN, LV1); - PIN(IN, gpv6-1, DOWN, LV1); - }; -}; - -&pinctrl_ese { - pinctrl-names = "default"; - pinctrl-0 = <&initial_ese>; - - initial_ese: initial-state { - PIN(IN, gpj2-0, DOWN, LV1); - PIN(IN, gpj2-1, DOWN, LV1); - PIN(IN, gpj2-2, DOWN, LV1); - }; -}; - -&pinctrl_fsys { - pinctrl-names = "default"; - pinctrl-0 = <&initial_fsys>; - - initial_fsys: initial-state { - PIN(IN, gpr3-0, NONE, LV1); - PIN(IN, gpr3-1, DOWN, LV1); - PIN(IN, gpr3-2, DOWN, LV1); - PIN(IN, gpr3-3, DOWN, LV1); - PIN(IN, gpr3-7, NONE, LV1); - }; -}; - -&pinctrl_imem { - pinctrl-names = "default"; - pinctrl-0 = <&initial_imem>; - - initial_imem: initial-state { - PIN(IN, gpf0-0, UP, LV1); - PIN(IN, gpf0-1, UP, LV1); - PIN(IN, gpf0-2, DOWN, LV1); - PIN(IN, gpf0-3, UP, LV1); - PIN(IN, gpf0-4, DOWN, LV1); - PIN(IN, gpf0-5, NONE, LV1); - PIN(IN, gpf0-6, DOWN, LV1); - PIN(IN, gpf0-7, UP, LV1); - }; -}; - -&pinctrl_nfc { - pinctrl-names = "default"; - pinctrl-0 = <&initial_nfc>; - - initial_nfc: initial-state { - PIN(IN, gpj0-2, DOWN, LV1); - }; -}; - -&pinctrl_peric { - pinctrl-names = "default"; - pinctrl-0 = <&initial_peric>; - - initial_peric: initial-state { - PIN(IN, gpv7-0, DOWN, LV1); - PIN(IN, gpv7-1, DOWN, LV1); - PIN(IN, gpv7-2, NONE, LV1); - PIN(IN, gpv7-3, DOWN, LV1); - PIN(IN, gpv7-4, DOWN, LV1); - PIN(IN, gpv7-5, DOWN, LV1); - - PIN(IN, gpb0-4, DOWN, LV1); - - PIN(IN, gpc0-2, DOWN, LV1); - PIN(IN, gpc0-5, DOWN, LV1); - PIN(IN, gpc0-7, DOWN, LV1); - - PIN(IN, gpc1-1, DOWN, LV1); - - PIN(IN, gpc3-4, NONE, LV1); - PIN(IN, gpc3-5, NONE, LV1); - PIN(IN, gpc3-6, NONE, LV1); - PIN(IN, gpc3-7, NONE, LV1); - - PIN(OUT, gpg0-0, NONE, LV1); - PIN(FUNC1, gpg0-1, DOWN, LV1); - - PIN(IN, gpd2-5, DOWN, LV1); - - PIN(IN, gpd4-0, NONE, LV1); - PIN(IN, gpd4-1, DOWN, LV1); - PIN(IN, gpd4-2, DOWN, LV1); - PIN(IN, gpd4-3, DOWN, LV1); - PIN(IN, gpd4-4, DOWN, LV1); - - PIN(IN, gpd6-3, DOWN, LV1); - - PIN(IN, gpd8-1, UP, LV1); - - PIN(IN, gpg1-0, DOWN, LV1); - PIN(IN, gpg1-1, DOWN, LV1); - PIN(IN, gpg1-2, DOWN, LV1); - PIN(IN, gpg1-3, DOWN, LV1); - PIN(IN, gpg1-4, DOWN, LV1); - - PIN(IN, gpg2-0, DOWN, LV1); - PIN(IN, gpg2-1, DOWN, LV1); - - PIN(IN, gpg3-0, DOWN, LV1); - PIN(IN, gpg3-1, DOWN, LV1); - PIN(IN, gpg3-5, DOWN, LV1); - PIN(IN, gpg3-7, DOWN, LV1); - }; -}; - -&pinctrl_touch { - pinctrl-names = "default"; - pinctrl-0 = <&initial_touch>; - - initial_touch: initial-state { - PIN(IN, gpj1-2, DOWN, LV1); - }; -}; - -&pwm { - pinctrl-0 = <&pwm0_out>; - pinctrl-names = "default"; - status = "okay"; -}; - -&mic { - status = "okay"; - - i80-if-timings { - }; -}; - -&pmu_system_controller { - assigned-clocks = <&pmu_system_controller 0>; - assigned-clock-parents = <&xxti>; -}; - -&serial_1 { - status = "okay"; -}; - -&spi_1 { - cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; - status = "okay"; - - wm5110: wm5110-codec@0 { - compatible = "wlf,wm5110"; - reg = <0x0>; - spi-max-frequency = <20000000>; - interrupt-parent = <&gpa0>; - interrupts = <4 IRQ_TYPE_NONE>; - clocks = <&pmu_system_controller 0>, - <&s2mps13_osc S2MPS11_CLK_BT>; - clock-names = "mclk1", "mclk2"; - - gpio-controller; - #gpio-cells = <2>; - - wlf,micd-detect-debounce = <300>; - wlf,micd-bias-start-time = <0x1>; - wlf,micd-rate = <0x7>; - wlf,micd-dbtime = <0x1>; - wlf,micd-force-micbias; - wlf,micd-configs = <0x0 1 0>; - wlf,hpdet-channel = <1>; - wlf,gpsw = <0x1>; - wlf,inmode = <2 0 2 0>; - - wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>; - wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>; - - /* core supplies */ - AVDD-supply = <&ldo18_reg>; - DBVDD1-supply = <&ldo18_reg>; - CPVDD-supply = <&ldo18_reg>; - DBVDD2-supply = <&ldo18_reg>; - DBVDD3-supply = <&ldo18_reg>; - - controller-data { - samsung,spi-feedback-delay = <0>; - }; - }; -}; - -&timer { - clock-frequency = <24000000>; -}; - -&tmu_atlas0 { - vtmu-supply = <&ldo3_reg>; - status = "okay"; -}; - -&tmu_apollo { - vtmu-supply = <&ldo3_reg>; - status = "okay"; -}; - -&tmu_g3d { - vtmu-supply = <&ldo3_reg>; - status = "okay"; -}; - -&usbdrd30 { - vdd33-supply = <&ldo10_reg>; - vdd10-supply = <&ldo6_reg>; - status = "okay"; -}; - -&usbdrd_dwc3_0 { - dr_mode = "otg"; -}; - -&usbdrd30_phy { - vbus-supply = <&safeout1_reg>; - status = "okay"; +&ldo31_reg { + regulator-name = "TSP_VDD_1.85V_AP"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; }; -&xxti { - clock-frequency = <24000000>; +&ldo38_reg { + regulator-name = "VCC_3.0V_MOTOR_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts index 1db4e7f..2fbf3a8 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts @@ -11,23 +11,13 @@ * published by the Free Software Foundation. */ -#include "exynos5433-tm2.dts" +#include "exynos5433-tm2-common.dtsi" / { model = "Samsung TM2E board"; compatible = "samsung,tm2e", "samsung,exynos5433"; }; -&ldo23_reg { - regulator-name = "CAM_SEN_CORE_1.025V_AP"; - regulator-max-microvolt = <1050000>; -}; - -&ldo25_reg { - regulator-name = "UNUSED_LDO25"; - regulator-always-off; -}; - &ldo31_reg { regulator-name = "TSP_VDD_1.8V_AP"; regulator-min-microvolt = <1800000>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 135890c..16072c1 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -299,7 +299,7 @@ #clock-cells = <1>; }; - cmu_peris: clock-controller@0x10040000 { + cmu_peris: clock-controller@10040000 { compatible = "samsung,exynos5433-cmu-peris"; reg = <0x10040000 0x1000>; #clock-cells = <1>; @@ -599,6 +599,30 @@ clock-names = "fin_pll", "mct"; }; + ppmu_d0_cpu: ppmu@10480000 { + compatible = "samsung,exynos-ppmu-v2"; + reg = <0x10480000 0x2000>; + status = "disabled"; + }; + + ppmu_d0_general: ppmu@10490000 { + compatible = "samsung,exynos-ppmu-v2"; + reg = <0x10490000 0x2000>; + status = "disabled"; + }; + + ppmu_d1_cpu: ppmu@104b0000 { + compatible = "samsung,exynos-ppmu-v2"; + reg = <0x104b0000 0x2000>; + status = "disabled"; + }; + + ppmu_d1_general: ppmu@104c0000 { + compatible = "samsung,exynos-ppmu-v2"; + reg = <0x104c0000 0x2000>; + status = "disabled"; + }; + pinctrl_alive: pinctrl@10580000 { compatible = "samsung,exynos5433-pinctrl"; reg = <0x10580000 0x1a20>, <0x11090000 0x100>; @@ -682,7 +706,7 @@ interrupts = <GIC_PPI 9 0xf04>; }; - mipi_phy: video-phy@105c0710 { + mipi_phy: video-phy { compatible = "samsung,exynos5433-mipi-video-phy"; #phy-cells = <1>; samsung,pmu-syscon = <&pmu_system_controller>; @@ -727,6 +751,29 @@ }; }; + decon_tv: decon@13880000 { + compatible = "samsung,exynos5433-decon-tv"; + reg = <0x13880000 0x20b8>; + clocks = <&cmu_disp CLK_PCLK_DECON_TV>, + <&cmu_disp CLK_ACLK_DECON_TV>, + <&cmu_disp CLK_ACLK_SMMU_TV0X>, + <&cmu_disp CLK_ACLK_XIU_TV0X>, + <&cmu_disp CLK_PCLK_SMMU_TV0X>, + <&cmu_disp CLK_SCLK_DECON_TV_VCLK>, + <&cmu_disp CLK_SCLK_DECON_TV_ECLK>; + clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x", + "aclk_xiu_decon0x", "pclk_smmu_decon0x", + "sclk_decon_vclk", "sclk_decon_eclk"; + samsung,disp-sysreg = <&syscon_disp>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + iommus = <&sysmmu_tv0x>, <&sysmmu_tv1x>; + iommu-names = "m0", "m1"; + }; + dsi: dsi@13900000 { compatible = "samsung,exynos5433-mipi-dsi"; reg = <0x13900000 0xC0>; @@ -790,6 +837,35 @@ }; }; + hdmi: hdmi@13970000 { + compatible = "samsung,exynos5433-hdmi"; + reg = <0x13970000 0x70000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_disp CLK_PCLK_HDMI>, + <&cmu_disp CLK_PCLK_HDMIPHY>, + <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO>, + <&cmu_disp CLK_PHYCLK_HDMI_PIXEL>, + <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY>, + <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER>, + <&cmu_disp CLK_PHYCLK_HDMIPHY_PIXEL_CLKO_PHY>, + <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER>, + <&xxti>, <&cmu_disp CLK_SCLK_HDMI_SPDIF>; + clock-names = "hdmi_pclk", "hdmi_i_pclk", + "i_tmds_clk", "i_pixel_clk", + "tmds_clko", "tmds_clko_user", + "pixel_clko", "pixel_clko_user", + "oscclk", "i_spdif_clk"; + phy = <&hdmiphy>; + ddc = <&hsi2c_11>; + samsung,syscon-phandle = <&pmu_system_controller>; + samsung,sysreg-phandle = <&syscon_disp>; + status = "disabled"; + }; + + hdmiphy: hdmiphy@13af0000 { + reg = <0x13af0000 0x80>; + }; + syscon_disp: syscon@13b80000 { compatible = "syscon"; reg = <0x13b80000 0x1010>; @@ -868,7 +944,7 @@ iommu-names = "left", "right"; }; - sysmmu_decon0x: sysmmu@0x13a00000 { + sysmmu_decon0x: sysmmu@13a00000 { compatible = "samsung,exynos-sysmmu"; reg = <0x13a00000 0x1000>; interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; @@ -878,7 +954,7 @@ #iommu-cells = <0>; }; - sysmmu_decon1x: sysmmu@0x13a10000 { + sysmmu_decon1x: sysmmu@13a10000 { compatible = "samsung,exynos-sysmmu"; reg = <0x13a10000 0x1000>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; @@ -888,7 +964,27 @@ #iommu-cells = <0>; }; - sysmmu_gscl0: sysmmu@0x13C80000 { + sysmmu_tv0x: sysmmu@13a20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13a20000 0x1000>; + interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_disp CLK_PCLK_SMMU_TV0X>, + <&cmu_disp CLK_ACLK_SMMU_TV0X>; + #iommu-cells = <0>; + }; + + sysmmu_tv1x: sysmmu@13a30000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13a30000 0x1000>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_disp CLK_PCLK_SMMU_TV1X>, + <&cmu_disp CLK_ACLK_SMMU_TV1X>; + #iommu-cells = <0>; + }; + + sysmmu_gscl0: sysmmu@13c80000 { compatible = "samsung,exynos-sysmmu"; reg = <0x13C80000 0x1000>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; @@ -898,7 +994,7 @@ #iommu-cells = <0>; }; - sysmmu_gscl1: sysmmu@0x13C90000 { + sysmmu_gscl1: sysmmu@13c90000 { compatible = "samsung,exynos-sysmmu"; reg = <0x13C90000 0x1000>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; @@ -908,7 +1004,7 @@ #iommu-cells = <0>; }; - sysmmu_gscl2: sysmmu@0x13CA0000 { + sysmmu_gscl2: sysmmu@13ca0000 { compatible = "samsung,exynos-sysmmu"; reg = <0x13CA0000 0x1000>; interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>; @@ -918,7 +1014,7 @@ #iommu-cells = <0>; }; - sysmmu_jpeg: sysmmu@0x15060000 { + sysmmu_jpeg: sysmmu@15060000 { compatible = "samsung,exynos-sysmmu"; reg = <0x15060000 0x1000>; interrupts = <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; @@ -928,7 +1024,7 @@ #iommu-cells = <0>; }; - sysmmu_mfc_0: sysmmu@0x15200000 { + sysmmu_mfc_0: sysmmu@15200000 { compatible = "samsung,exynos-sysmmu"; reg = <0x15200000 0x1000>; interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; @@ -938,7 +1034,7 @@ #iommu-cells = <0>; }; - sysmmu_mfc_1: sysmmu@0x15210000 { + sysmmu_mfc_1: sysmmu@15210000 { compatible = "samsung,exynos-sysmmu"; reg = <0x15210000 0x1000>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; @@ -1261,7 +1357,7 @@ status = "disabled"; }; - usbdrd30: usb@15400000 { + usbdrd30: usbdrd { compatible = "samsung,exynos5250-dwusb3"; clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, <&cmu_fsys CLK_SCLK_USBDRD30>; @@ -1308,7 +1404,7 @@ status = "disabled"; }; - usbhost30: usb@15a00000 { + usbhost30: usbhost { compatible = "samsung,exynos5250-dwusb3"; clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, <&cmu_fsys CLK_SCLK_USBHOST30>; @@ -1398,6 +1494,8 @@ audio-subsystem@11400000 { compatible = "samsung,exynos5433-lpass"; reg = <0x11400000 0x100>, <0x11500000 0x08>; + clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>; + clock-names = "sfr0_ctrl"; samsung,pmu-syscon = <&pmu_system_controller>; #address-cells = <1>; #size-cells = <1>; @@ -1458,5 +1556,6 @@ }; }; +#include "exynos5433-bus.dtsi" #include "exynos5433-pinctrl.dtsi" #include "exynos5433-tmu.dtsi" diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi index 8232198..7ebb939 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi @@ -497,49 +497,49 @@ samsung,pins = "gpr0-0"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <3>; + samsung,pin-drv = <4>; }; sd0_cmd: sd0-cmd { samsung,pins = "gpr0-1"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <3>; + samsung,pin-drv = <4>; }; sd0_ds: sd0-ds { samsung,pins = "gpr0-2"; samsung,pin-function = <2>; samsung,pin-pud = <1>; - samsung,pin-drv = <3>; + samsung,pin-drv = <4>; }; sd0_qrdy: sd0-qrdy { samsung,pins = "gpr0-3"; samsung,pin-function = <2>; samsung,pin-pud = <1>; - samsung,pin-drv = <3>; + samsung,pin-drv = <4>; }; sd0_bus1: sd0-bus-width1 { samsung,pins = "gpr1-0"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <3>; + samsung,pin-drv = <4>; }; sd0_bus4: sd0-bus-width4 { samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <3>; + samsung,pin-drv = <4>; }; sd0_bus8: sd0-bus-width8 { samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <3>; + samsung,pin-drv = <4>; }; sd1_clk: sd1-clk { diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 6602718..39db645 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -1,3 +1,6 @@ +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts new file mode 100644 index 0000000..a619f64 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts @@ -0,0 +1,115 @@ +/* + * Device Tree file for Freescale LS1012A Freedom Board. + * + * Copyright 2016, Freescale Semiconductor + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "fsl-ls1012a.dtsi" + +/ { + model = "LS1012A Freedom Board"; + compatible = "fsl,ls1012a-frdm", "fsl,ls1012a"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + frame-master; + bitclock-master; + system-clock-frequency = <25000000>; + }; + }; +}; + +&duart0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + codec: sgtl5000@a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0xa>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_1p8v>; + clocks = <&sys_mclk>; + }; +}; + +&sai2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts new file mode 100644 index 0000000..14a67f1 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts @@ -0,0 +1,128 @@ +/* + * Device Tree file for Freescale LS1012A QDS Board. + * + * Copyright 2016, Freescale Semiconductor + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "fsl-ls1012a.dtsi" + +/ { + model = "LS1012A QDS Board"; + compatible = "fsl,ls1012a-qds", "fsl,ls1012a"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + frame-master; + bitclock-master; + system-clock-frequency = <24576000>; + }; + }; +}; + +&duart0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + pca9547@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + + codec: sgtl5000@a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0xa>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + clocks = <&sys_mclk>; + }; + }; + }; +}; + +&sai2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts new file mode 100644 index 0000000..62c5c71 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts @@ -0,0 +1,59 @@ +/* + * Device Tree file for Freescale LS1012A RDB Board. + * + * Copyright 2016, Freescale Semiconductor + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "fsl-ls1012a.dtsi" + +/ { + model = "LS1012A RDB Board"; + compatible = "fsl,ls1012a-rdb", "fsl,ls1012a"; +}; + +&duart0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi new file mode 100644 index 0000000..cffebb4 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -0,0 +1,247 @@ +/* + * Device Tree Include file for Freescale Layerscape-1012A family SoC. + * + * Copyright 2016, Freescale Semiconductor + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "fsl,ls1012a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + clocks = <&clockgen 1 0>; + #cooling-cells = <2>; + }; + }; + + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sysclk"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */ + <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */ + <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */ + <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */ + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + }; + + gic: interrupt-controller@1400000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x1401000 0 0x1000>, /* GICD */ + <0x0 0x1402000 0 0x2000>, /* GICC */ + <0x0 0x1404000 0 0x2000>, /* GICH */ + <0x0 0x1406000 0 0x2000>; /* GICV */ + interrupts = <1 9 IRQ_TYPE_LEVEL_LOW>; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&dcfg>; + offset = <0xb0>; + mask = <0x02>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + scfg: scfg@1570000 { + compatible = "fsl,ls1012a-scfg", "syscon"; + reg = <0x0 0x1570000 0x0 0x10000>; + big-endian; + }; + + dcfg: dcfg@1ee0000 { + compatible = "fsl,ls1012a-dcfg", + "syscon"; + reg = <0x0 0x1ee0000 0x0 0x10000>; + big-endian; + }; + + clockgen: clocking@1ee1000 { + compatible = "fsl,ls1012a-clockgen"; + reg = <0x0 0x1ee1000 0x0 0x1000>; + #clock-cells = <2>; + clocks = <&sysclk>; + }; + + i2c0: i2c@2180000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2180000 0x0 0x10000>; + interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + i2c1: i2c@2190000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2190000 0x0 0x10000>; + interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + duart0: serial@21c0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x00 0x21c0500 0x0 0x100>; + interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + duart1: serial@21c0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x00 0x21c0600 0x0 0x100>; + interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + gpio0: gpio@2300000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2300000 0x0 0x10000>; + interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@2310000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2310000 0x0 0x10000>; + interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wdog0: wdog@2ad0000 { + compatible = "fsl,ls1012a-wdt", + "fsl,imx21-wdt"; + reg = <0x0 0x2ad0000 0x0 0x10000>; + interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 0>; + big-endian; + }; + + sai1: sai@2b50000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0x2b50000 0x0 0x10000>; + interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>, + <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 47>, + <&edma0 1 46>; + status = "disabled"; + }; + + sai2: sai@2b60000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0x2b60000 0x0 0x10000>; + interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>, + <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 45>, + <&edma0 1 44>; + status = "disabled"; + }; + + edma0: edma@2c00000 { + #dma-cells = <2>; + compatible = "fsl,vf610-edma"; + reg = <0x0 0x2c00000 0x0 0x10000>, + <0x0 0x2c10000 0x0 0x10000>, + <0x0 0x2c20000 0x0 0x10000>; + interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>, + <0 103 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma-tx", "edma-err"; + dma-channels = <32>; + big-endian; + clock-names = "dmamux0", "dmamux1"; + clocks = <&clockgen 4 3>, + <&clockgen 4 3>; + }; + + sata: sata@3200000 { + compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>; + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 38806ca..4a164b8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -45,6 +45,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> / { compatible = "fsl,ls1046a"; @@ -67,6 +68,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -279,6 +281,84 @@ clocks = <&sysclk>; }; + tmu: tmu@1f00000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f00000 0x0 0x10000>; + interrupts = <0 33 0x4>; + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; + fsl,tmu-calibration = + /* Calibration data group 1 */ + <0x00000000 0x00000026 + 0x00000001 0x0000002d + 0x00000002 0x00000032 + 0x00000003 0x00000039 + 0x00000004 0x0000003f + 0x00000005 0x00000046 + 0x00000006 0x0000004d + 0x00000007 0x00000054 + 0x00000008 0x0000005a + 0x00000009 0x00000061 + 0x0000000a 0x0000006a + 0x0000000b 0x00000071 + /* Calibration data group 2 */ + 0x00010000 0x00000025 + 0x00010001 0x0000002c + 0x00010002 0x00000035 + 0x00010003 0x0000003d + 0x00010004 0x00000045 + 0x00010005 0x0000004e + 0x00010006 0x00000057 + 0x00010007 0x00000061 + 0x00010008 0x0000006b + 0x00010009 0x00000076 + /* Calibration data group 3 */ + 0x00020000 0x00000029 + 0x00020001 0x00000033 + 0x00020002 0x0000003d + 0x00020003 0x00000049 + 0x00020004 0x00000056 + 0x00020005 0x00000061 + 0x00020006 0x0000006d + /* Calibration data group 4 */ + 0x00030000 0x00000021 + 0x00030001 0x0000002a + 0x00030002 0x0000003c + 0x00030003 0x0000004e>; + big-endian; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 3>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + dspi: dspi@2100000 { compatible = "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts index 265e0a8..2ff46ca 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts @@ -102,7 +102,6 @@ reg = <0x75>; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; i2c@1 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile index c8b8f80..c3a6c19 100644 --- a/arch/arm64/boot/dts/hisilicon/Makefile +++ b/arch/arm64/boot/dts/hisilicon/Makefile @@ -1,3 +1,4 @@ +dtb-$(CONFIG_ARCH_HISI) += hi3660-hikey960.dtb dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts new file mode 100644 index 0000000..ff37f0a --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -0,0 +1,33 @@ +/* + * dts file for Hisilicon HiKey960 Development Board + * + * Copyright (C) 2016, Hisilicon Ltd. + * + */ + +/dts-v1/; + +#include "hi3660.dtsi" + +/ { + model = "HiKey960"; + compatible = "hisilicon,hi3660"; + + aliases { + serial5 = &uart5; /* console UART */ + }; + + chosen { + stdout-path = "serial5:115200n8"; + }; + + memory@0 { + device_type = "memory"; + /* rewrite this at bootloader */ + reg = <0x0 0x0 0x0 0x0>; + }; +}; + +&uart5 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi new file mode 100644 index 0000000..3983086 --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -0,0 +1,160 @@ +/* + * dts file for Hisilicon Hi3660 SoC + * + * Copyright (C) 2016, Hisilicon Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "hisilicon,hi3660"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + + cpu4: cpu@100 { + compatible = "arm,cortex-a73", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x100>; + enable-method = "psci"; + }; + + cpu5: cpu@101 { + compatible = "arm,cortex-a73", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x101>; + enable-method = "psci"; + }; + + cpu6: cpu@102 { + compatible = "arm,cortex-a73", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x102>; + enable-method = "psci"; + }; + + cpu7: cpu@103 { + compatible = "arm,cortex-a73", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x103>; + enable-method = "psci"; + }; + }; + + gic: interrupt-controller@e82b0000 { + compatible = "arm,gic-400"; + reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */ + <0x0 0xe82b2000 0 0x2000>, /* GICC */ + <0x0 0xe82b4000 0 0x2000>, /* GICH */ + <0x0 0xe82b6000 0 0x2000>; /* GICV */ + #address-cells = <0>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + fixed_uart5: fixed_19_2M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "fixed:uart5"; + }; + + uart5: uart@fdf05000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf05000 0x0 0x1000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&fixed_uart5 &fixed_uart5>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 1690883..3e6ce6c 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/marvell/armada-371x.dtsi b/arch/arm64/boot/dts/marvell/armada-371x.dtsi index c9e5325..11226f7 100644 --- a/arch/arm64/boot/dts/marvell/armada-371x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-371x.dtsi @@ -16,17 +16,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -35,11 +35,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index 89de0a7..86602c9 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -62,11 +62,45 @@ }; }; +&i2c0 { + status = "okay"; +}; + /* CON3 */ &sata { status = "okay"; }; +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <108000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "bootloader"; + reg = <0x0 0x200000>; + }; + partition@200000 { + label = "U-boot Env"; + reg = <0x200000 0x10000>; + }; + partition@210000 { + label = "Linux"; + reg = <0x210000 0xDF0000>; + }; + }; + }; +}; + /* Exported on the micro USB connector CON32 through an FTDI */ &uart0 { status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts index 83178d9..e3a136e 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts @@ -14,17 +14,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -33,11 +33,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -80,3 +80,69 @@ &usb3 { status = "okay"; }; + +&mdio { + switch0: switch0@1 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <ð0>; + }; + + port@1 { + reg = <1>; + label = "wan"; + phy-handle = <&switch0phy0>; + }; + + port@2 { + reg = <2>; + label = "lan0"; + phy-handle = <&switch0phy1>; + }; + + port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&switch0phy2>; + }; + + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@11 { + reg = <0x11>; + }; + switch0phy1: switch0phy1@12 { + reg = <0x12>; + }; + switch0phy2: switch0phy2@13 { + reg = <0x13>; + }; + }; + }; +}; + +ð0 { + phy-mode = "rgmii-id"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi index 5120296..59d7557 100644 --- a/arch/arm64/boot/dts/marvell/armada-372x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi @@ -16,17 +16,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -35,11 +35,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index bab5c6f..b48d668 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -15,17 +15,17 @@ * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * - * This file is distributed in the hope that it will be useful + * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Or, alternatively + * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use + * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following @@ -34,11 +34,11 @@ * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. @@ -98,6 +98,35 @@ /* 32M internal register @ 0xd000_0000 */ ranges = <0x0 0x0 0xd0000000 0x2000000>; + spi0: spi@10600 { + compatible = "marvell,armada-3700-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10600 0xA00>; + clocks = <&nb_periph_clk 7>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + num-cs = <4>; + status = "disabled"; + }; + + i2c0: i2c@11000 { + compatible = "marvell,armada-3700-i2c"; + reg = <0x11000 0x24>; + clocks = <&nb_periph_clk 10>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + i2c1: i2c@11080 { + compatible = "marvell,armada-3700-i2c"; + reg = <0x11080 0x24>; + clocks = <&nb_periph_clk 9>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "marvell,armada-3700-uart"; reg = <0x12000 0x400>; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts new file mode 100644 index 0000000..f7bb0cc --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts @@ -0,0 +1,138 @@ +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * Device Tree file for MACCHIATOBin Armada 8040 community board platform + */ + +#include "armada-8040.dtsi" + +/ { + model = "Marvell 8040 MACHIATOBin"; + compatible = "marvell,armada8040-mcbin", "marvell,armada8040", + "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + /* Regulator labels correspond with schematics */ + v_3_3: regulator-3-3v { + compatible = "regulator-fixed"; + regulator-name = "v_3_3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; + + v_vddo_h: regulator-1-8v { + compatible = "regulator-fixed"; + regulator-name = "v_vddo_h"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + status = "okay"; + }; + + v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { + compatible = "regulator-fixed"; + regulator-name = "v_5v0_usb3_hst_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + /* actually GPIO controlled, but 8k has no GPIO support yet */ + regulator-always-on; + status = "okay"; + }; + + usb3h0_phy: usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&v_5v0_usb3_hst_vbus>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&cpm_i2c0 { + clock-frequency = <100000>; + status = "okay"; +}; + +&cpm_sata0 { + /* CPM Lane 0 - U29 */ + status = "okay"; +}; + +&cpm_usb3_0 { + /* J38? - USB2.0 only */ + status = "okay"; +}; + +&cpm_usb3_1 { + /* J38? - USB2.0 only */ + status = "okay"; +}; + +&cps_sata0 { + /* CPS Lane 1 - U32 */ + /* CPS Lane 3 - U31 */ + status = "okay"; +}; + +&cps_spi1 { + status = "okay"; + + spi-flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <50000000>; + reg = <0>; + }; +}; + +&cps_usb3_0 { + /* CPS Lane 2 - CON7 */ + usb-phy = <&usb3h0_phy>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index 05222f7..3a99c36 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -74,13 +74,14 @@ "cpm-gop-dp", "none", "cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata", "cpm-sata-usb", "cpm-main", - "cpm-sd-mmc", "none", "none", + "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io", "cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197"; }; cpm_sata0: sata@540000 { - compatible = "marvell,armada-8k-ahci"; + compatible = "marvell,armada-8k-ahci", + "generic-ahci"; reg = <0x540000 0x30000>; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpm_syscon0 1 15>; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index 638820ce..9e09c4d 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -74,13 +74,14 @@ "cps-gop-dp", "none", "cps-pcie_x10", "cps-pcie_x11", "cps-pcie_x4", "cps-pcie-xor", "cps-sata", "cps-sata-usb", "cps-main", - "cps-sd-mmc", "none", "none", + "cps-sd-mmc-gop", "none", "none", "cps-slow-io", "cps-usb3h0", "cps-usb3h1", "cps-usb3dev", "cps-eip150", "cps-eip197"; }; cps_sata0: sata@540000 { - compatible = "marvell,armada-8k-ahci"; + compatible = "marvell,armada-8k-ahci", + "generic-ahci"; reg = <0x540000 0x30000>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cps_syscon0 1 15>; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 40a02b2..6922252 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -182,12 +182,12 @@ map@0 { trip = <&target>; cooling-device = <&cpu0 0 0>; - contribution = <1024>; + contribution = <3072>; }; map@1 { trip = <&target>; cooling-device = <&cpu2 0 0>; - contribution = <2048>; + contribution = <1024>; }; }; }; @@ -401,6 +401,11 @@ efuse: efuse@10206000 { compatible = "mediatek,mt8173-efuse"; reg = <0 0x10206000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + thermal_calibration: calib@528 { + reg = <0x528 0xc>; + }; }; apmixedsys: clock-controller@10209000 { @@ -574,6 +579,8 @@ resets = <&pericfg MT8173_PERI_THERM_SW_RST>; mediatek,auxadc = <&auxadc>; mediatek,apmixedsys = <&apmixedsys>; + nvmem-cells = <&thermal_calibration>; + nvmem-cell-names = "calibration-data"; }; nor_flash: spi@1100d000 { @@ -780,6 +787,8 @@ compatible = "mediatek,mt8173-mmsys", "syscon"; reg = <0 0x14000000 0 0x1000>; power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + assigned-clocks = <&topckgen CLK_TOP_MM_SEL>; + assigned-clock-rates = <400000000>; #clock-cells = <1>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index a918e10..62fa85a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -1,5 +1,8 @@ +#include <dt-bindings/clock/tegra186-clock.h> #include <dt-bindings/gpio/tegra186-gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mailbox/tegra186-hsp.h> +#include <dt-bindings/reset/tegra186-reset.h> / { compatible = "nvidia,tegra186"; @@ -29,9 +32,9 @@ reg = <0x0 0x03100000 0x0 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp 55>; + clocks = <&bpmp TEGRA186_CLK_UARTA>; clock-names = "serial"; - resets = <&bpmp 47>; + resets = <&bpmp TEGRA186_RESET_UARTA>; reset-names = "serial"; status = "disabled"; }; @@ -41,9 +44,9 @@ reg = <0x0 0x03110000 0x0 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp 56>; + clocks = <&bpmp TEGRA186_CLK_UARTB>; clock-names = "serial"; - resets = <&bpmp 48>; + resets = <&bpmp TEGRA186_RESET_UARTB>; reset-names = "serial"; status = "disabled"; }; @@ -53,9 +56,9 @@ reg = <0x0 0x03130000 0x0 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp 77>; + clocks = <&bpmp TEGRA186_CLK_UARTD>; clock-names = "serial"; - resets = <&bpmp 50>; + resets = <&bpmp TEGRA186_RESET_UARTD>; reset-names = "serial"; status = "disabled"; }; @@ -65,9 +68,9 @@ reg = <0x0 0x03140000 0x0 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp 194>; + clocks = <&bpmp TEGRA186_CLK_UARTE>; clock-names = "serial"; - resets = <&bpmp 132>; + resets = <&bpmp TEGRA186_RESET_UARTE>; reset-names = "serial"; status = "disabled"; }; @@ -77,9 +80,9 @@ reg = <0x0 0x03150000 0x0 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp 195>; + clocks = <&bpmp TEGRA186_CLK_UARTF>; clock-names = "serial"; - resets = <&bpmp 111>; + resets = <&bpmp TEGRA186_RESET_UARTF>; reset-names = "serial"; status = "disabled"; }; @@ -90,9 +93,9 @@ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bpmp 47>; + clocks = <&bpmp TEGRA186_CLK_I2C1>; clock-names = "div-clk"; - resets = <&bpmp 19>; + resets = <&bpmp TEGRA186_RESET_I2C1>; reset-names = "i2c"; status = "disabled"; }; @@ -103,9 +106,9 @@ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bpmp 75>; + clocks = <&bpmp TEGRA186_CLK_I2C3>; clock-names = "div-clk"; - resets = <&bpmp 21>; + resets = <&bpmp TEGRA186_RESET_I2C3>; reset-names = "i2c"; status = "disabled"; }; @@ -117,9 +120,9 @@ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bpmp 86>; + clocks = <&bpmp TEGRA186_CLK_I2C4>; clock-names = "div-clk"; - resets = <&bpmp 22>; + resets = <&bpmp TEGRA186_RESET_I2C4>; reset-names = "i2c"; status = "disabled"; }; @@ -131,9 +134,9 @@ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bpmp 48>; + clocks = <&bpmp TEGRA186_CLK_I2C5>; clock-names = "div-clk"; - resets = <&bpmp 23>; + resets = <&bpmp TEGRA186_RESET_I2C5>; reset-names = "i2c"; status = "disabled"; }; @@ -145,9 +148,9 @@ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bpmp 125>; + clocks = <&bpmp TEGRA186_CLK_I2C6>; clock-names = "div-clk"; - resets = <&bpmp 24>; + resets = <&bpmp TEGRA186_RESET_I2C6>; reset-names = "i2c"; status = "disabled"; }; @@ -158,9 +161,9 @@ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bpmp 182>; + clocks = <&bpmp TEGRA186_CLK_I2C7>; clock-names = "div-clk"; - resets = <&bpmp 81>; + resets = <&bpmp TEGRA186_RESET_I2C7>; reset-names = "i2c"; status = "disabled"; }; @@ -171,9 +174,9 @@ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bpmp 183>; + clocks = <&bpmp TEGRA186_CLK_I2C9>; clock-names = "div-clk"; - resets = <&bpmp 83>; + resets = <&bpmp TEGRA186_RESET_I2C9>; reset-names = "i2c"; status = "disabled"; }; @@ -182,9 +185,9 @@ compatible = "nvidia,tegra186-sdhci"; reg = <0x0 0x03400000 0x0 0x10000>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp 52>; + clocks = <&bpmp TEGRA186_CLK_SDMMC1>; clock-names = "sdhci"; - resets = <&bpmp 33>; + resets = <&bpmp TEGRA186_RESET_SDMMC1>; reset-names = "sdhci"; status = "disabled"; }; @@ -193,9 +196,9 @@ compatible = "nvidia,tegra186-sdhci"; reg = <0x0 0x03420000 0x0 0x10000>; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp 53>; + clocks = <&bpmp TEGRA186_CLK_SDMMC2>; clock-names = "sdhci"; - resets = <&bpmp 34>; + resets = <&bpmp TEGRA186_RESET_SDMMC2>; reset-names = "sdhci"; status = "disabled"; }; @@ -204,9 +207,9 @@ compatible = "nvidia,tegra186-sdhci"; reg = <0x0 0x03440000 0x0 0x10000>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp 76>; + clocks = <&bpmp TEGRA186_CLK_SDMMC3>; clock-names = "sdhci"; - resets = <&bpmp 35>; + resets = <&bpmp TEGRA186_RESET_SDMMC3>; reset-names = "sdhci"; status = "disabled"; }; @@ -215,9 +218,9 @@ compatible = "nvidia,tegra186-sdhci"; reg = <0x0 0x03460000 0x0 0x10000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp 54>; + clocks = <&bpmp TEGRA186_CLK_SDMMC4>; clock-names = "sdhci"; - resets = <&bpmp 36>; + resets = <&bpmp TEGRA186_RESET_SDMMC4>; reset-names = "sdhci"; status = "disabled"; }; @@ -248,9 +251,9 @@ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bpmp 218>; + clocks = <&bpmp TEGRA186_CLK_I2C2>; clock-names = "div-clk"; - resets = <&bpmp 20>; + resets = <&bpmp TEGRA186_RESET_I2C2>; reset-names = "i2c"; status = "disabled"; }; @@ -261,9 +264,9 @@ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&bpmp 219>; + clocks = <&bpmp TEGRA186_CLK_I2C8>; clock-names = "div-clk"; - resets = <&bpmp 82>; + resets = <&bpmp TEGRA186_RESET_I2C8>; reset-names = "i2c"; status = "disabled"; }; @@ -273,9 +276,9 @@ reg = <0x0 0x0c280000 0x0 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp 215>; + clocks = <&bpmp TEGRA186_CLK_UARTC>; clock-names = "serial"; - resets = <&bpmp 49>; + resets = <&bpmp TEGRA186_RESET_UARTC>; reset-names = "serial"; status = "disabled"; }; @@ -285,9 +288,9 @@ reg = <0x0 0x0c290000 0x0 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp 216>; + clocks = <&bpmp TEGRA186_CLK_UARTG>; clock-names = "serial"; - resets = <&bpmp 112>; + resets = <&bpmp TEGRA186_RESET_UARTG>; reset-names = "serial"; status = "disabled"; }; @@ -369,7 +372,8 @@ bpmp: bpmp { compatible = "nvidia,tegra186-bpmp"; - mboxes = <&hsp_top0 0 19>; + mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB + TEGRA_HSP_DB_MASTER_BPMP>; shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi index f881437..d946408 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi @@ -1,4 +1,5 @@ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> &pm8916_gpios { @@ -30,6 +31,18 @@ &pm8916_mpps { + pinctrl-names = "default"; + pinctrl-0 = <&ls_exp_gpio_f>; + + ls_exp_gpio_f: pm8916_mpp4 { + pinconf { + pins = "mpp4"; + function = "digital"; + output-low; + power-source = <PM8916_MPP_L5>; // 1.8V + }; + }; + pm8916_mpps_leds: pm8916_mpps_leds { pinconf { pins = "mpp2", "mpp3"; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi index e1e6c6b..185388d 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi @@ -72,4 +72,17 @@ bias-disable; }; }; + + msm_key_volp_n_default: msm_key_volp_n_default { + pinmux { + function = "gpio"; + pins = "gpio107"; + }; + pinconf { + pins = "gpio107"; + drive-strength = <8>; + input-enable; + bias-pull-up; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 08bd5eb..eac5389 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -15,6 +15,8 @@ #include "pm8916.dtsi" #include "apq8016-sbc-soc-pins.dtsi" #include "apq8016-sbc-pmic-pins.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/sound/apq8016-lpass.h> / { @@ -85,6 +87,7 @@ pinctrl-names = "default","sleep"; pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>; pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>; + #sound-dai-cells = <1>; ports { #address-cells = <1>; @@ -285,6 +288,15 @@ qcom,audio-routing = "AMIC2", "MIC BIAS Internal2", "AMIC3", "MIC BIAS External1"; + external-dai-link@0 { + link-name = "ADV7533"; + cpu { /* QUAT */ + sound-dai = <&lpass MI2S_QUATERNARY>; + }; + codec { + sound-dai = <&adv_bridge 0>; + }; + }; internal-codec-playback-dai-link@0 { /* I2S - Internal codec */ link-name = "WCD"; @@ -306,6 +318,10 @@ }; }; }; + + wcnss@a21b000 { + status = "okay"; + }; }; usb2513 { @@ -331,6 +347,22 @@ }; }; }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&msm_key_volp_n_default>; + + button@0 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + }; + }; }; &wcd_codec { diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi index 0de9517..b1142c4 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi @@ -5,11 +5,23 @@ pinctrl-names = "default"; pinctrl-0 = <&ls_exp_gpio_f>; - ls_exp_gpio_f: pm8916_mpp4 { + ls_exp_gpio_f: pm8994_gpio5 { pinconf { pins = "gpio5"; output-low; power-source = <2>; // PM8994_GPIO_S4, 1.8V }; }; + + volume_up_gpio: pm8996_gpio2 { + pinconf { + pins = "gpio2"; + function = "normal"; + input-enable; + drive-push-pull; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 422959b..d2196fc 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -15,6 +15,8 @@ #include "pm8994.dtsi" #include "apq8096-db820c-pins.dtsi" #include "apq8096-db820c-pmic-pins.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> / { aliases { @@ -87,4 +89,21 @@ status = "okay"; }; }; + + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&volume_up_gpio>; + + button@0 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index 10c83e1..4cb0b58 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -720,4 +720,17 @@ }; }; }; + + wcnss_pin_a: wcnss-active { + pinmux { + pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; + function = "wcss_wlan"; + }; + + pinconf { + pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; + drive-strength = <6>; + bias-pull-up; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index f8ff327..68a8e67 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8916.h> #include <dt-bindings/reset/qcom,gcc-msm8916.h> +#include <dt-bindings/clock/qcom,rpmcc.h> / { model = "Qualcomm Technologies, Inc. MSM8916"; @@ -82,7 +83,7 @@ no-map; }; - wcnss@89300000 { + wcnss_mem: wcnss@89300000 { reg = <0x0 0x89300000 0x0 0x600000>; no-map; }; @@ -856,6 +857,316 @@ memory-region = <&mpss_mem>; }; }; + + pronto: wcnss@a21b000 { + compatible = "qcom,pronto-v2-pil", "qcom,pronto"; + reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu"; + + memory-region = <&wcnss_mem>; + + interrupts-extended = <&intc 0 149 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + vddmx-supply = <&pm8916_l3>; + vddpx-supply = <&pm8916_l7>; + + qcom,state = <&wcnss_smp2p_out 0>; + qcom,state-names = "stop"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + status = "disabled"; + + iris { + compatible = "qcom,wcn3620"; + + clocks = <&rpmcc RPM_SMD_RF_CLK2>; + clock-names = "xo"; + + vddxo-supply = <&pm8916_l7>; + vddrfa-supply = <&pm8916_s3>; + vddpa-supply = <&pm8916_l9>; + vdddig-supply = <&pm8916_l5>; + }; + + smd-edge { + interrupts = <0 142 1>; + + qcom,ipc = <&apcs 8 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&pronto>; + + bt { + compatible = "qcom,wcnss-bt"; + }; + + wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>, + <0 146 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", "tx-rings-empty"; + }; + }; + }; + }; + + tpiu@820000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x820000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + port { + tpiu_in: endpoint { + slave-mode; + remote-endpoint = <&replicator_out1>; + }; + }; + }; + + funnel@821000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x821000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* + * Not described input ports: + * 0 - connected to Resource and Power Manger CPU ETM + * 1 - not-connected + * 2 - connected to Modem CPU ETM + * 3 - not-connected + * 5 - not-connected + * 6 - connected trought funnel to Wireless CPU ETM + * 7 - connected to STM component + */ + + port@4 { + reg = <4>; + funnel0_in4: endpoint { + slave-mode; + remote-endpoint = <&funnel1_out>; + }; + }; + port@8 { + reg = <0>; + funnel0_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + }; + + replicator@824000 { + compatible = "qcom,coresight-replicator1x", "arm,primecell"; + reg = <0x824000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&tpiu_in>; + }; + }; + port@2 { + reg = <0>; + replicator_in: endpoint { + slave-mode; + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf@825000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x825000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + etf_out: endpoint { + slave-mode; + remote-endpoint = <&funnel0_out>; + }; + }; + port@1 { + reg = <0>; + etf_in: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + }; + + etr@826000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x826000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + port { + etr_in: endpoint { + slave-mode; + remote-endpoint = <&replicator_out0>; + }; + }; + }; + + funnel@841000 { /* APSS funnel only 4 inputs are used */ + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x841000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel1_in0: endpoint { + slave-mode; + remote-endpoint = <&etm0_out>; + }; + }; + port@1 { + reg = <1>; + funnel1_in1: endpoint { + slave-mode; + remote-endpoint = <&etm1_out>; + }; + }; + port@2 { + reg = <2>; + funnel1_in2: endpoint { + slave-mode; + remote-endpoint = <&etm2_out>; + }; + }; + port@3 { + reg = <3>; + funnel1_in3: endpoint { + slave-mode; + remote-endpoint = <&etm3_out>; + }; + }; + port@4 { + reg = <0>; + funnel1_out: endpoint { + remote-endpoint = <&funnel0_in4>; + }; + }; + }; + }; + + etm@85c000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x85c000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU0>; + + port { + etm0_out: endpoint { + remote-endpoint = <&funnel1_in0>; + }; + }; + }; + + etm@85d000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x85d000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU1>; + + port { + etm1_out: endpoint { + remote-endpoint = <&funnel1_in1>; + }; + }; + }; + + etm@85e000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x85e000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU2>; + + port { + etm2_out: endpoint { + remote-endpoint = <&funnel1_in2>; + }; + }; + }; + + etm@85f000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x85f000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU3>; + + port { + etm3_out: endpoint { + remote-endpoint = <&funnel1_in3>; + }; + }; + }; }; smd { @@ -871,7 +1182,7 @@ qcom,smd-channels = "rpm_requests"; rpmcc: qcom,rpmcc { - compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; + compatible = "qcom,rpmcc-msm8916"; #clock-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 29ed6b6..ed7223d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -258,6 +258,12 @@ method = "smc"; }; + firmware { + scm { + compatible = "qcom,scm-msm8996"; + }; + }; + tcsr_mutex: hwlock { compatible = "qcom,tcsr-mutex"; syscon = <&tcsr_mutex_regs 0 0x1000>; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts index dbea2c3..c5f8f69 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts @@ -277,6 +277,8 @@ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&audio_clk_a>, <&cs2000>, <&audio_clk_c>, diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index bcaf400..7a8986e 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -412,6 +412,8 @@ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&audio_clk_a>, <&cs2000>, <&audio_clk_c>, diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index bbf594b..eac4f29 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -166,6 +166,9 @@ <0x0 0xf1060000 0 0x20000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; }; wdt0: watchdog@e6020000 { @@ -337,72 +340,6 @@ #power-domain-cells = <1>; }; - audma0: dma-controller@ec700000 { - compatible = "renesas,dmac-r8a7795", - "renesas,rcar-dmac"; - reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12", "ch13", "ch14", "ch15"; - clocks = <&cpg CPG_MOD 502>; - clock-names = "fck"; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - #dma-cells = <1>; - dma-channels = <16>; - }; - - audma1: dma-controller@ec720000 { - compatible = "renesas,dmac-r8a7795", - "renesas,rcar-dmac"; - reg = <0 0xec720000 0 0x10000>; - interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12", "ch13", "ch14", "ch15"; - clocks = <&cpg CPG_MOD 501>; - clock-names = "fck"; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - #dma-cells = <1>; - dma-channels = <16>; - }; - pfc: pfc@e6060000 { compatible = "renesas,pfc-r8a7795"; reg = <0 0xe6060000 0 0x50c>; @@ -522,6 +459,72 @@ dma-channels = <16>; }; + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a7795", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a7795", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <16>; + }; + avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a7795", "renesas,etheravb-rcar-gen3"; @@ -563,6 +566,7 @@ phy-mode = "rgmii-id"; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; can0: can@e6c30000 { @@ -792,7 +796,8 @@ i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7795"; + compatible = "renesas,i2c-r8a7795", + "renesas,rcar-gen3-i2c"; reg = <0 0xe6500000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 931>; @@ -806,7 +811,8 @@ i2c1: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7795"; + compatible = "renesas,i2c-r8a7795", + "renesas,rcar-gen3-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 930>; @@ -820,7 +826,8 @@ i2c2: i2c@e6510000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7795"; + compatible = "renesas,i2c-r8a7795", + "renesas,rcar-gen3-i2c"; reg = <0 0xe6510000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 929>; @@ -834,7 +841,8 @@ i2c3: i2c@e66d0000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7795"; + compatible = "renesas,i2c-r8a7795", + "renesas,rcar-gen3-i2c"; reg = <0 0xe66d0000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 928>; @@ -848,7 +856,8 @@ i2c4: i2c@e66d8000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7795"; + compatible = "renesas,i2c-r8a7795", + "renesas,rcar-gen3-i2c"; reg = <0 0xe66d8000 0 0x40>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 927>; @@ -862,7 +871,8 @@ i2c5: i2c@e66e0000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7795"; + compatible = "renesas,i2c-r8a7795", + "renesas,rcar-gen3-i2c"; reg = <0 0xe66e0000 0 0x40>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 919>; @@ -876,7 +886,8 @@ i2c6: i2c@e66e8000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7795"; + compatible = "renesas,i2c-r8a7795", + "renesas,rcar-gen3-i2c"; reg = <0 0xe66e8000 0 0x40>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; @@ -887,6 +898,69 @@ status = "disabled"; }; + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + rcar_sound: sound@ec500000 { /* * #sound-dai-cells is required @@ -919,6 +993,8 @@ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, @@ -930,6 +1006,8 @@ "src.9", "src.8", "src.7", "src.6", "src.5", "src.4", "src.3", "src.2", "src.1", "src.0", + "mix.1", "mix.0", + "ctu.1", "ctu.0", "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -946,6 +1024,22 @@ }; }; + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + rcar_sound,src { src0: src-0 { interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; @@ -1058,6 +1152,7 @@ reg = <0 0xee300000 0 0x1fff>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 815>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; }; @@ -1146,7 +1241,8 @@ }; usb2_phy0: usb-phy@ee080200 { - compatible = "renesas,usb2-phy-r8a7795"; + compatible = "renesas,usb2-phy-r8a7795", + "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>; @@ -1156,7 +1252,8 @@ }; usb2_phy1: usb-phy@ee0a0200 { - compatible = "renesas,usb2-phy-r8a7795"; + compatible = "renesas,usb2-phy-r8a7795", + "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee0a0200 0 0x700>; clocks = <&cpg CPG_MOD 702>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -1165,7 +1262,8 @@ }; usb2_phy2: usb-phy@ee0c0200 { - compatible = "renesas,usb2-phy-r8a7795"; + compatible = "renesas,usb2-phy-r8a7795", + "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee0c0200 0 0x700>; clocks = <&cpg CPG_MOD 701>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -1256,7 +1354,8 @@ }; pciec0: pcie@fe000000 { - compatible = "renesas,pcie-r8a7795"; + compatible = "renesas,pcie-r8a7795", + "renesas,pcie-rcar-gen3"; reg = <0 0xfe000000 0 0x80000>; #address-cells = <3>; #size-cells = <2>; @@ -1281,7 +1380,8 @@ }; pciec1: pcie@ee800000 { - compatible = "renesas,pcie-r8a7795"; + compatible = "renesas,pcie-r8a7795", + "renesas,pcie-rcar-gen3"; reg = <0 0xee800000 0 0x80000>; #address-cells = <3>; #size-cells = <2>; @@ -1551,5 +1651,63 @@ }; }; }; + + tsc: thermal@e6198000 { + compatible = "renesas,r8a7795-thermal"; + reg = <0 0xe6198000 0 0x68>, + <0 0xe61a0000 0 0x5c>, + <0 0xe61a8000 0 0x5c>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #thermal-sensor-cells = <1>; + status = "okay"; + }; + + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + sensor_thermal2: sensor-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + sensor_thermal3: sensor-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + + trips { + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index f35e96c..c7f40f8 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -18,6 +18,7 @@ aliases { serial0 = &scif2; + ethernet0 = &avb; }; chosen { @@ -31,6 +32,11 @@ reg = <0x0 0x48000000 0x0 0x78000000>; }; + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x80000000>; + }; + reg_1p8v: regulator0 { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; @@ -102,6 +108,11 @@ pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; + avb_pins: avb { + groups = "avb_mdc"; + function = "avb"; + }; + scif2_pins: scif2 { groups = "scif2_data_a"; function = "scif2"; @@ -153,6 +164,32 @@ }; }; +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + renesas,no-ether-link; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <900>; + rxdv-skew-ps = <0>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txc-skew-ps = <900>; + txen-skew-ps = <0>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + }; +}; + &extal_clk { clock-frequency = <16666666>; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 28ba59a..f7120cd 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -69,6 +69,13 @@ clock-frequency = <0>; }; + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + /* External SCIF clock - to be overridden by boards that provide it */ scif_clk: scif { compatible = "fixed-clock"; @@ -94,6 +101,9 @@ <0x0 0xf1060000 0 0x20000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; }; timer { @@ -262,7 +272,8 @@ i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7796"; + compatible = "renesas,i2c-r8a7796", + "renesas,rcar-gen3-i2c"; reg = <0 0xe6500000 0 0x40>; interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 931>; @@ -277,7 +288,8 @@ i2c1: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7796"; + compatible = "renesas,i2c-r8a7796", + "renesas,rcar-gen3-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 930>; @@ -292,7 +304,8 @@ i2c2: i2c@e6510000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7796"; + compatible = "renesas,i2c-r8a7796", + "renesas,rcar-gen3-i2c"; reg = <0 0xe6510000 0 0x40>; interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 929>; @@ -307,7 +320,8 @@ i2c3: i2c@e66d0000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7796"; + compatible = "renesas,i2c-r8a7796", + "renesas,rcar-gen3-i2c"; reg = <0 0xe66d0000 0 0x40>; interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 928>; @@ -321,7 +335,8 @@ i2c4: i2c@e66d8000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7796"; + compatible = "renesas,i2c-r8a7796", + "renesas,rcar-gen3-i2c"; reg = <0 0xe66d8000 0 0x40>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 927>; @@ -335,7 +350,8 @@ i2c5: i2c@e66e0000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7796"; + compatible = "renesas,i2c-r8a7796", + "renesas,rcar-gen3-i2c"; reg = <0 0xe66e0000 0 0x40>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 919>; @@ -349,7 +365,8 @@ i2c6: i2c@e66e8000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7796"; + compatible = "renesas,i2c-r8a7796", + "renesas,rcar-gen3-i2c"; reg = <0 0xe66e8000 0 0x40>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; @@ -360,6 +377,104 @@ status = "disabled"; }; + can0: can@e6c30000 { + compatible = "renesas,can-r8a7796", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c30000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A7796_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + + can1: can@e6c38000 { + compatible = "renesas,can-r8a7796", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c38000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A7796_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + + canfd: can@e66c0000 { + compatible = "renesas,r8a7796-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0 0xe66c0000 0 0x8000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A7796_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7796", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + phy-mode = "rgmii-id"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + scif2: serial@e6e88000 { compatible = "renesas,scif-r8a7796", "renesas,rcar-gen3-scif", "renesas,scif"; @@ -373,6 +488,64 @@ status = "disabled"; }; + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a7796", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 211>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>, + <&dmac2 0x41>, <&dmac2 0x40>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a7796", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 210>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>, + <&dmac2 0x43>, <&dmac2 0x42>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a7796", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 209>; + dmas = <&dmac0 0x45>, <&dmac0 0x44>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a7796", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x47>, <&dmac0 0x46>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7796", "renesas,rcar-dmac"; @@ -511,5 +684,63 @@ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; status = "disabled"; }; + + tsc: thermal@e6198000 { + compatible = "renesas,r8a7796-thermal"; + reg = <0 0xe6198000 0 0x68>, + <0 0xe61a0000 0 0x5c>, + <0 0xe61a8000 0 0x5c>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #thermal-sensor-cells = <1>; + status = "okay"; + }; + + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + sensor_thermal2: sensor-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + sensor_thermal3: sensor-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + + trips { + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi index fff8b19..4772917 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi @@ -90,7 +90,7 @@ 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; default-brightness-level = <128>; - enable-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_en>; pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>; @@ -101,7 +101,7 @@ compatible = "mmc-pwrseq-emmc"; pinctrl-0 = <&emmc_reset>; pinctrl-names = "default"; - reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>; }; keys: gpio-keys { @@ -111,7 +111,7 @@ power { wakeup-source; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; }; @@ -121,7 +121,7 @@ vcc_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host"; @@ -166,7 +166,7 @@ phy-supply = <&vcc_lan>; phy-mode = "rmii"; clock_in_out = "output"; - snps,reset-gpio = <&gpio3 12 0>; + snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts index e5eeca2..e631d42 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts @@ -66,7 +66,7 @@ ir: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio3 30 GPIO_ACTIVE_LOW>; + gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_int>; }; @@ -77,7 +77,7 @@ pinctrl-0 = <&pwr_key>; power { - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; wakeup-source; @@ -88,13 +88,13 @@ compatible = "gpio-leds"; blue { - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; label = "geekbox:blue:led"; default-state = "on"; }; red { - gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>; label = "geekbox:red:led"; default-state = "off"; }; @@ -146,7 +146,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pmic_int>, <&pmic_sleep>; interrupt-parent = <&gpio0>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; rockchip,system-power-controller; vcc1-supply = <&vcc_sys>; vcc2-supply = <&vcc_sys>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts index ff5a403..fac116a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts @@ -61,7 +61,7 @@ compatible = "mmc-pwrseq-emmc"; pinctrl-0 = <&emmc_reset>; pinctrl-names = "default"; - reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>; }; ext_gmac: external-gmac-clock { @@ -78,7 +78,7 @@ power { wakeup-source; - gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; label = "GPIO Power"; linux,code = <KEY_POWER>; }; @@ -88,7 +88,7 @@ compatible = "gpio-leds"; red { - gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; label = "orion:red:led"; pinctrl-names = "default"; pinctrl-0 = <&led_ctl>; @@ -96,7 +96,7 @@ }; blue { - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; label = "orion:blue:led"; pinctrl-names = "default"; pinctrl-0 = <&stby_pwren>; @@ -117,7 +117,7 @@ /* supplies both host and otg */ vcc_host: vcc-host-regulator { compatible = "regulator-fixed"; - gpio = <&gpio0 4 GPIO_ACTIVE_LOW>; + gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host"; @@ -149,7 +149,7 @@ vcc_sd: vcc-sd-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sd"; - gpio = <&gpio3 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc_io>; @@ -217,7 +217,7 @@ phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 12 0>; + snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; tx_delay = <0x30>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts index 85f7a24..8cdb3bf 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts @@ -63,7 +63,7 @@ pinctrl-0 = <&pwr_key>; power { - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; wakeup-source; @@ -105,7 +105,7 @@ compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio0>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>, <&pmic_sleep>; rockchip,system-power-controller; @@ -236,7 +236,7 @@ compatible = "bosch,bma250"; reg = <0x18>; interrupt-parent = <&gpio2>; - interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PC1 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -247,8 +247,8 @@ compatible = "silead,gsl1680"; reg = <0x40>; interrupt-parent = <&gpio3>; - interrupts = <28 IRQ_TYPE_EDGE_FALLING>; - power-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + interrupts = <RK_PD4 IRQ_TYPE_EDGE_FALLING>; + power-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; touchscreen-size-x = <800>; touchscreen-size-y = <1280>; silead,max-fingers = <5>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts index eed1ef6..7134181 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts @@ -61,7 +61,7 @@ compatible = "mmc-pwrseq-emmc"; pinctrl-0 = <&emmc_reset>; pinctrl-names = "default"; - reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>; }; keys: gpio-keys { @@ -71,7 +71,7 @@ power { wakeup-source; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; }; @@ -81,7 +81,7 @@ compatible = "gpio-leds"; work { - gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; label = "r88:green:led"; pinctrl-names = "default"; pinctrl-0 = <&led_ctl>; @@ -90,7 +90,7 @@ ir: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio3 30 GPIO_ACTIVE_LOW>; + gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_int>; }; @@ -104,10 +104,10 @@ reset-gpios = /* BT_RST_N */ - <&gpio3 5 GPIO_ACTIVE_LOW>, + <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ - <&gpio3 4 GPIO_ACTIVE_LOW>; + <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>; }; vcc_18: vcc18-regulator { @@ -124,7 +124,7 @@ vcc_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host"; @@ -199,7 +199,7 @@ phy-supply = <&vcc_lan>; phy-mode = "rmii"; clock_in_out = "output"; - snps,reset-gpio = <&gpio3 12 0>; + snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts index 3040a98..42033bc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts @@ -85,7 +85,7 @@ 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; default-brightness-level = <200>; - enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; pwms = <&pwm0 0 25000 0>; }; @@ -128,7 +128,7 @@ vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>; regulator-name = "vcc5v0_host"; @@ -163,7 +163,7 @@ phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 15 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; tx_delay = <0x28>; @@ -196,7 +196,7 @@ }; &pcie0 { - ep-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; num-lanes = <4>; pinctrl-names = "default"; pinctrl-0 = <&pcie_clkreqn>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index c928015..8e6d1bd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -283,6 +283,7 @@ #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; + aspm-no-l0s; bus-range = <0x0 0x1>; clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; @@ -297,6 +298,7 @@ <0 0 0 2 &pcie0_intc 1>, <0 0 0 3 &pcie0_intc 2>, <0 0 0 4 &pcie0_intc 3>; + max-link-speed = <1>; msi-map = <0x0 &its 0x0 0x1000>; phys = <&pcie_phy>; phy-names = "pcie-phy"; @@ -321,8 +323,10 @@ compatible = "generic-ehci"; reg = <0x0 0xfe380000 0x0 0x20000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>; - clock-names = "hclk_host0", "hclk_host0_arb"; + clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>, + <&u2phy0>; + clock-names = "usbhost", "arbiter", + "utmi"; phys = <&u2phy0_host>; phy-names = "usb"; status = "disabled"; @@ -332,8 +336,12 @@ compatible = "generic-ohci"; reg = <0x0 0xfe3a0000 0x0 0x20000>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>; - clock-names = "hclk_host0", "hclk_host0_arb"; + clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>, + <&u2phy0>; + clock-names = "usbhost", "arbiter", + "utmi"; + phys = <&u2phy0_host>; + phy-names = "usb"; status = "disabled"; }; @@ -341,8 +349,10 @@ compatible = "generic-ehci"; reg = <0x0 0xfe3c0000 0x0 0x20000>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>; - clock-names = "hclk_host1", "hclk_host1_arb"; + clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>, + <&u2phy1>; + clock-names = "usbhost", "arbiter", + "utmi"; phys = <&u2phy1_host>; phy-names = "usb"; status = "disabled"; @@ -352,8 +362,12 @@ compatible = "generic-ohci"; reg = <0x0 0xfe3e0000 0x0 0x20000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>; - clock-names = "hclk_host1", "hclk_host1_arb"; + clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>, + <&u2phy1>; + clock-names = "usbhost", "arbiter", + "utmi"; + phys = <&u2phy1_host>; + phy-names = "usb"; status = "disabled"; }; @@ -607,7 +621,7 @@ status = "disabled"; }; - thermal-zones { + thermal_zones: thermal-zones { cpu_thermal: cpu { polling-delay-passive = <100>; polling-delay = <1000>; @@ -1077,6 +1091,7 @@ pmucru: pmu-clock-controller@ff750000 { compatible = "rockchip,rk3399-pmucru"; reg = <0x0 0xff750000 0x0 0x1000>; + rockchip,grf = <&pmugrf>; #clock-cells = <1>; #reset-cells = <1>; assigned-clocks = <&pmucru PLL_PPLL>; @@ -1086,6 +1101,7 @@ cru: clock-controller@ff760000 { compatible = "rockchip,rk3399-cru"; reg = <0x0 0xff760000 0x0 0x1000>; + rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; assigned-clocks = @@ -1436,6 +1452,13 @@ }; }; + edp { + edp_hpd: edp-hpd { + rockchip,pins = + <4 23 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + gmac { rgmii_pins: rgmii-pins { rockchip,pins = diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index 7c7511b..da881f5 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -273,6 +273,17 @@ reg = <0x59801000 0x400>; }; + sdctrl@59810000 { + compatible = "socionext,uniphier-ld11-sdctrl", + "simple-mfd", "syscon"; + reg = <0x59810000 0x400>; + + sd_rst: reset { + compatible = "socionext,uniphier-ld11-sd-reset"; + #reset-cells = <1>; + }; + }; + perictrl@59820000 { compatible = "socionext,uniphier-ld11-perictrl", "simple-mfd", "syscon"; @@ -289,6 +300,16 @@ }; }; + emmc: sdhc@5a000000 { + compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; + reg = <0x5a000000 0x400>; + interrupts = <0 78 4>; + clocks = <&sys_clk 4>; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + }; + usb0: usb@5a800100 { compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index fcaecc6..a6b3a70 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -374,6 +374,16 @@ }; }; + emmc: sdhc@5a000000 { + compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; + reg = <0x5a000000 0x400>; + interrupts = <0 78 4>; + clocks = <&sys_clk 4>; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + }; + soc-glue@5f800000 { compatible = "socionext,uniphier-ld20-soc-glue", "simple-mfd", "syscon"; diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi index 88ff70a..b850b2c 100644 --- a/arch/arm64/boot/dts/zte/zx296718.dtsi +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi @@ -44,6 +44,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/zx296718-clock.h> / { compatible = "zte,zx296718"; @@ -81,6 +82,8 @@ compatible = "arm,cortex-a53","arm,armv8"; reg = <0x0 0x0>; enable-method = "psci"; + clocks = <&topcrm A53_GATE>; + operating-points-v2 = <&cluster0_opp>; }; cpu1: cpu@1 { @@ -88,6 +91,8 @@ compatible = "arm,cortex-a53","arm,armv8"; reg = <0x0 0x1>; enable-method = "psci"; + clocks = <&topcrm A53_GATE>; + operating-points-v2 = <&cluster0_opp>; }; cpu2: cpu@2 { @@ -95,6 +100,8 @@ compatible = "arm,cortex-a53","arm,armv8"; reg = <0x0 0x2>; enable-method = "psci"; + clocks = <&topcrm A53_GATE>; + operating-points-v2 = <&cluster0_opp>; }; cpu3: cpu@3 { @@ -102,6 +109,38 @@ compatible = "arm,cortex-a53","arm,armv8"; reg = <0x0 0x3>; enable-method = "psci"; + clocks = <&topcrm A53_GATE>; + operating-points-v2 = <&cluster0_opp>; + }; + }; + + cluster0_opp: opp-table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + clock-latency-ns = <500000>; + }; + + opp@648000000 { + opp-hz = /bits/ 64 <648000000>; + clock-latency-ns = <500000>; + }; + + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + clock-latency-ns = <500000>; + }; + + opp@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + clock-latency-ns = <500000>; + }; + + opp@1188000000 { + opp-hz = /bits/ 64 <1188000000>; + clock-latency-ns = <500000>; }; }; |
