diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2015-02-17 09:47:46 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2015-02-17 09:47:46 -0800 |
commit | cc4f9c2a91b7be7b3590bb1cbe8148873556aa3f (patch) | |
tree | 742062aabfe32c660261d16b9b3330d599f02c4f /arch/arm64/boot | |
parent | 03a40e29941cf7b12d9eef92cd1a56e04affbc06 (diff) | |
parent | 0d2fdcd76504535bd1721ba9e8d4d03bcbb10afd (diff) | |
download | op-kernel-dev-cc4f9c2a91b7be7b3590bb1cbe8148873556aa3f.zip op-kernel-dev-cc4f9c2a91b7be7b3590bb1cbe8148873556aa3f.tar.gz |
Merge tag '64bit-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit changes and additions from Olof Johansson:
"The 64-bit set of updates this release cycle adds support for three
new platforms:
- Samsunc Exynos 7
- Freescale LS2085a
- Mediatek MT8173
For all these, the changes mostly consititude additions of DT
contents, but also some Kconfig entries to allow dependency/selection
of drivers per-platform, etc"
* tag '64bit-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: Kconfig: clean up two no-op Kconfig options from CONFIG_ARCH_TEGRA*
arm64: Fix sort of platform Kconfig entries
arm64: Add support for FSL's LS2085A SoC in Kconfig and defconfig
arm64: Add DTS support for FSL's LS2085A SoC
arm64: mediatek: Add MT8173 SoC Kconfig and defconfig
arm64: dts: Add mediatek MT8173 SoC and evaluation board dts and Makefile
Document: DT: Add bindings for mediatek MT8173 SoC Platform
arm64: Add Tegra132 support
arm64: Enable ARMv8 based exynos7 SoC support
arm64: dts: Add nodes for mmc, i2c, rtc, watchdog, adc on exynos7
arm64: dts: Add PMU DT node for exynos7 SoC
arm64: dts: Add initial pinctrl support to exynos7
arm64: dts: Add initial device tree support for exynos7
Diffstat (limited to 'arch/arm64/boot')
-rw-r--r-- | arch/arm64/boot/dts/Makefile | 3 | ||||
-rw-r--r-- | arch/arm64/boot/dts/exynos/Makefile | 5 | ||||
-rw-r--r-- | arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 84 | ||||
-rw-r--r-- | arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi | 588 | ||||
-rw-r--r-- | arch/arm64/boot/dts/exynos/exynos7.dtsi | 530 | ||||
-rw-r--r-- | arch/arm64/boot/dts/freescale/Makefile | 5 | ||||
-rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts | 65 | ||||
-rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi | 163 | ||||
-rw-r--r-- | arch/arm64/boot/dts/mediatek/Makefile | 5 | ||||
-rw-r--r-- | arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 38 | ||||
-rw-r--r-- | arch/arm64/boot/dts/mediatek/mt8173.dtsi | 168 |
11 files changed, 1654 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index c62b0f4..e0350ca 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -2,5 +2,8 @@ dts-dirs += amd dts-dirs += apm dts-dirs += arm dts-dirs += cavium +dts-dirs += exynos +dts-dirs += freescale +dts-dirs += mediatek subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile new file mode 100644 index 0000000..20310e5 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_EXYNOS7) += exynos7-espresso.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts new file mode 100644 index 0000000..5424cc4 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -0,0 +1,84 @@ +/* + * SAMSUNG Exynos7 Espresso board device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos7.dtsi" + +/ { + model = "Samsung Exynos7 Espresso board based on EXYNOS7"; + compatible = "samsung,exynos7-espresso", "samsung,exynos7"; + + aliases { + serial0 = &serial_2; + mshc0 = &mmc_0; + mshc2 = &mmc_2; + }; + + chosen { + linux,stdout-path = &serial_2; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0x0 0xC0000000>; + }; +}; + +&fin_pll { + clock-frequency = <24000000>; +}; + +&serial_2 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + cap-mmc-highspeed; + non-removable; + card-detect-delay = <200>; + clock-frequency = <800000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8>; + bus-width = <8>; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + cap-sd-highspeed; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; + disable-wp; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi new file mode 100644 index 0000000..2eef4a2 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi @@ -0,0 +1,588 @@ +/* + * Samsung's Exynos7 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos7 SoC pin-mux and pin-config options are listed as + * device tree nodes in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +&pinctrl_alive { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; + interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa3: gpa3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_bus0 { + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd2: gpd2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd4: gpd4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd5: gpd5 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd6: gpd6 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd7: gpd7 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd8: gpd8 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg3: gpg3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + hs_i2c10_bus: hs-i2c10-bus { + samsung,pins = "gpb0-1", "gpb0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c11_bus: hs-i2c11-bus { + samsung,pins = "gpb0-3", "gpb0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c2_bus: hs-i2c2-bus { + samsung,pins = "gpd0-3", "gpd0-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpd0-0", "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpd0-2", "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpd1-4", "gpd1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + hs_i2c3_bus: hs-i2c3-bus { + samsung,pins = "gpd1-3", "gpd1-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + hs_i2c0_bus: hs-i2c0-bus { + samsung,pins = "gpd2-1", "gpd2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c1_bus: hs-i2c1-bus { + samsung,pins = "gpd2-3", "gpd2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c9_bus: hs-i2c9-bus { + samsung,pins = "gpd2-7", "gpd2-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd2-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd2-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd2-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + hs_i2c8_bus: hs-i2c8-bus { + samsung,pins = "gpd5-3", "gpd5-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpd5-0", "gpd5-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c4_bus: hs-i2c4-bus { + samsung,pins = "gpg3-1", "gpg3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c5_bus: hs-i2c5-bus { + samsung,pins = "gpg3-3", "gpg3-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_nfc { + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + hs_i2c6_bus: hs-i2c6-bus { + samsung,pins = "gpj0-1", "gpj0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_touch { + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + hs_i2c7_bus: hs-i2c7-bus { + samsung,pins = "gpj1-1", "gpj1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_ff { + gpg4: gpg4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + spi3_bus: spi3-bus { + samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_ese { + gpv7: gpv7 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + spi4_bus: spi4-bus { + samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_fsys0 { + gpr4: gpr4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpr4-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpr4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpr4-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpr4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; +}; + +&pinctrl_fsys1 { + gpr0: gpr0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr1: gpr1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr2: gpr2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr3: gpr3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpr0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpr0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_ds: sd0-ds { + samsung,pins = "gpr0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <3>; + }; + + sd0_qrdy: sd0-qrdy { + samsung,pins = "gpr0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpr1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpr2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpr2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + sd1_ds: sd1-ds { + samsung,pins = "gpr2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <6>; + }; + + sd1_qrdy: sd1-qrdy { + samsung,pins = "gpr2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <6>; + }; + + sd1_int: sd1-int { + samsung,pins = "gpr2-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <6>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpr3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <2>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <2>; + }; + + sd1_bus8: sd1-bus-width8 { + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <2>; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi new file mode 100644 index 0000000..d7a37c3 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -0,0 +1,530 @@ +/* + * SAMSUNG EXYNOS7 SoC device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/clock/exynos7-clk.h> + +/ { + compatible = "samsung,exynos7"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + pinctrl0 = &pinctrl_alive; + pinctrl1 = &pinctrl_bus0; + pinctrl2 = &pinctrl_nfc; + pinctrl3 = &pinctrl_touch; + pinctrl4 = &pinctrl_ff; + pinctrl5 = &pinctrl_ese; + pinctrl6 = &pinctrl_fsys0; + pinctrl7 = &pinctrl_fsys1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x0>; + enable-method = "psci"; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x1>; + enable-method = "psci"; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x2>; + enable-method = "psci"; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x3>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x18000000>; + + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + fin_pll: xxti { + compatible = "fixed-clock"; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + + gic: interrupt-controller@11001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x11001000 0x1000>, + <0x11002000 0x1000>, + <0x11004000 0x2000>, + <0x11006000 0x2000>; + }; + + clock_topc: clock-controller@10570000 { + compatible = "samsung,exynos7-clock-topc"; + reg = <0x10570000 0x10000>; + #clock-cells = <1>; + }; + + clock_top0: clock-controller@105d0000 { + compatible = "samsung,exynos7-clock-top0"; + reg = <0x105d0000 0xb000>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>, + <&clock_topc DOUT_SCLK_BUS1_PLL>, + <&clock_topc DOUT_SCLK_CC_PLL>, + <&clock_topc DOUT_SCLK_MFC_PLL>; + clock-names = "fin_pll", "dout_sclk_bus0_pll", + "dout_sclk_bus1_pll", "dout_sclk_cc_pll", + "dout_sclk_mfc_pll"; + }; + + clock_top1: clock-controller@105e0000 { + compatible = "samsung,exynos7-clock-top1"; + reg = <0x105e0000 0xb000>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>, + <&clock_topc DOUT_SCLK_BUS1_PLL>, + <&clock_topc DOUT_SCLK_CC_PLL>, + <&clock_topc DOUT_SCLK_MFC_PLL>; + clock-names = "fin_pll", "dout_sclk_bus0_pll", + "dout_sclk_bus1_pll", "dout_sclk_cc_pll", + "dout_sclk_mfc_pll"; + }; + + clock_ccore: clock-controller@105b0000 { + compatible = "samsung,exynos7-clock-ccore"; + reg = <0x105b0000 0xd00>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_CCORE_133>; + clock-names = "fin_pll", "dout_aclk_ccore_133"; + }; + + clock_peric0: clock-controller@13610000 { + compatible = "samsung,exynos7-clock-peric0"; + reg = <0x13610000 0xd00>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC0>, + <&clock_top0 CLK_SCLK_UART0>; + clock-names = "fin_pll", "dout_aclk_peric0_66", + "sclk_uart0"; + }; + + clock_peric1: clock-controller@14c80000 { + compatible = "samsung,exynos7-clock-peric1"; + reg = <0x14c80000 0xd00>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC1>, + <&clock_top0 CLK_SCLK_UART1>, + <&clock_top0 CLK_SCLK_UART2>, + <&clock_top0 CLK_SCLK_UART3>; + clock-names = "fin_pll", "dout_aclk_peric1_66", + "sclk_uart1", "sclk_uart2", "sclk_uart3"; + }; + + clock_peris: clock-controller@10040000 { + compatible = "samsung,exynos7-clock-peris"; + reg = <0x10040000 0xd00>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_PERIS>; + clock-names = "fin_pll", "dout_aclk_peris_66"; + }; + + clock_fsys0: clock-controller@10e90000 { + compatible = "samsung,exynos7-clock-fsys0"; + reg = <0x10e90000 0xd00>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS0_200>, + <&clock_top1 DOUT_SCLK_MMC2>; + clock-names = "fin_pll", "dout_aclk_fsys0_200", + "dout_sclk_mmc2"; + }; + + clock_fsys1: clock-controller@156e0000 { + compatible = "samsung,exynos7-clock-fsys1"; + reg = <0x156e0000 0xd00>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>, + <&clock_top1 DOUT_SCLK_MMC0>, + <&clock_top1 DOUT_SCLK_MMC1>; + clock-names = "fin_pll", "dout_aclk_fsys1_200", + "dout_sclk_mmc0", "dout_sclk_mmc1"; + }; + + serial_0: serial@13630000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13630000 0x100>; + interrupts = <0 440 0>; + clocks = <&clock_peric0 PCLK_UART0>, + <&clock_peric0 SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + serial_1: serial@14c20000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x14c20000 0x100>; + interrupts = <0 456 0>; + clocks = <&clock_peric1 PCLK_UART1>, + <&clock_peric1 SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + serial_2: serial@14c30000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x14c30000 0x100>; + interrupts = <0 457 0>; + clocks = <&clock_peric1 PCLK_UART2>, + <&clock_peric1 SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + serial_3: serial@14c40000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x14c40000 0x100>; + interrupts = <0 458 0>; + clocks = <&clock_peric1 PCLK_UART3>, + <&clock_peric1 SCLK_UART3>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + pinctrl_alive: pinctrl@10580000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x10580000 0x1000>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos7-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 16 0>; + }; + }; + + pinctrl_bus0: pinctrl@13470000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x13470000 0x1000>; + interrupts = <0 383 0>; + }; + + pinctrl_nfc: pinctrl@14cd0000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x14cd0000 0x1000>; + interrupts = <0 473 0>; + }; + + pinctrl_touch: pinctrl@14ce0000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x14ce0000 0x1000>; + interrupts = <0 474 0>; + }; + + pinctrl_ff: pinctrl@14c90000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x14c90000 0x1000>; + interrupts = <0 475 0>; + }; + + pinctrl_ese: pinctrl@14ca0000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x14ca0000 0x1000>; + interrupts = <0 476 0>; + }; + + pinctrl_fsys0: pinctrl@10e60000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x10e60000 0x1000>; + interrupts = <0 221 0>; + }; + + pinctrl_fsys1: pinctrl@15690000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x15690000 0x1000>; + interrupts = <0 203 0>; + }; + + hsi2c_0: hsi2c@13640000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13640000 0x1000>; + interrupts = <0 441 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c0_bus>; + clocks = <&clock_peric0 PCLK_HSI2C0>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_1: hsi2c@13650000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13650000 0x1000>; + interrupts = <0 442 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c1_bus>; + clocks = <&clock_peric0 PCLK_HSI2C1>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_2: hsi2c@14e60000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e60000 0x1000>; + interrupts = <0 459 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c2_bus>; + clocks = <&clock_peric1 PCLK_HSI2C2>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_3: hsi2c@14e70000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e70000 0x1000>; + interrupts = <0 460 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c3_bus>; + clocks = <&clock_peric1 PCLK_HSI2C3>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_4: hsi2c@13660000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13660000 0x1000>; + interrupts = <0 443 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c4_bus>; + clocks = <&clock_peric0 PCLK_HSI2C4>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_5: hsi2c@13670000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13670000 0x1000>; + interrupts = <0 444 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c5_bus>; + clocks = <&clock_peric0 PCLK_HSI2C5>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_6: hsi2c@14e00000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e00000 0x1000>; + interrupts = <0 461 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c6_bus>; + clocks = <&clock_peric1 PCLK_HSI2C6>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_7: hsi2c@13e10000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13e10000 0x1000>; + interrupts = <0 462 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c7_bus>; + clocks = <&clock_peric1 PCLK_HSI2C7>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_8: hsi2c@14e20000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e20000 0x1000>; + interrupts = <0 463 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c8_bus>; + clocks = <&clock_peric1 PCLK_HSI2C8>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_9: hsi2c@13680000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13680000 0x1000>; + interrupts = <0 445 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c9_bus>; + clocks = <&clock_peric0 PCLK_HSI2C9>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_10: hsi2c@13690000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13690000 0x1000>; + interrupts = <0 446 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c10_bus>; + clocks = <&clock_peric0 PCLK_HSI2C10>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_11: hsi2c@136a0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x136a0000 0x1000>; + interrupts = <0 447 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c11_bus>; + clocks = <&clock_peric0 PCLK_HSI2C11>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xff01>, + <1 14 0xff01>, + <1 11 0xff01>, + <1 10 0xff01>; + }; + + pmu_system_controller: system-controller@105c0000 { + compatible = "samsung,exynos7-pmu", "syscon"; + reg = <0x105c0000 0x5000>; + }; + + rtc: rtc@10590000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x10590000 0x100>; + interrupts = <0 355 0>, <0 356 0>; + clocks = <&clock_ccore PCLK_RTC>; + clock-names = "rtc"; + status = "disabled"; + }; + + watchdog: watchdog@101d0000 { + compatible = "samsung,exynos7-wdt"; + reg = <0x101d0000 0x100>; + interrupts = <0 110 0>; + clocks = <&clock_peris PCLK_WDT>; + clock-names = "watchdog"; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; + }; + + mmc_0: mmc@15740000 { + compatible = "samsung,exynos7-dw-mshc-smu"; + interrupts = <0 201 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x15740000 0x2000>; + clocks = <&clock_fsys1 ACLK_MMC0>, + <&clock_top1 CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + mmc_1: mmc@15750000 { + compatible = "samsung,exynos7-dw-mshc"; + interrupts = <0 202 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x15750000 0x2000>; + clocks = <&clock_fsys1 ACLK_MMC1>, + <&clock_top1 CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + mmc_2: mmc@15560000 { + compatible = "samsung,exynos7-dw-mshc-smu"; + interrupts = <0 216 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x15560000 0x2000>; + clocks = <&clock_fsys0 ACLK_MMC2>, + <&clock_top1 CLK_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + adc: adc@13620000 { + compatible = "samsung,exynos7-adc"; + reg = <0x13620000 0x100>; + interrupts = <0 448 0>; + clocks = <&clock_peric0 PCLK_ADCIF>; + clock-names = "adc"; + #io-channel-cells = <1>; + io-channel-ranges; + status = "disabled"; + }; + + pwm: pwm@136c0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x136c0000 0x100>; + samsung,pwm-outputs = <0>, <1>, <2>, <3>; + #pwm-cells = <3>; + clocks = <&clock_peric0 PCLK_PWM>; + clock-names = "timers"; + }; + }; +}; + +#include "exynos7-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile new file mode 100644 index 0000000..4f2de3e7 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_FSL_LS2085A) += fsl-ls2085a-simu.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts new file mode 100644 index 0000000..82e2a6f --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts @@ -0,0 +1,65 @@ +/* + * Device Tree file for Freescale LS2085a software Simulator model + * + * Copyright (C) 2014, Freescale Semiconductor + * + * Bhupesh Sharma <bhupesh.sharma@freescale.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +/include/ "fsl-ls2085a.dtsi" + +/ { + model = "Freescale Layerscape 2085a software Simulator model"; + compatible = "fsl,ls2085a-simu", "fsl,ls2085a"; + + ethernet@2210000 { + compatible = "smsc,lan91c111"; + reg = <0x0 0x2210000 0x0 0x100>; + interrupts = <0 58 0x1>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi new file mode 100644 index 0000000..e281ceb --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi @@ -0,0 +1,163 @@ +/* + * Device Tree Include file for Freescale Layerscape-2085A family SoC. + * + * Copyright (C) 2014, Freescale Semiconductor + * + * Bhupesh Sharma <bhupesh.sharma@freescale.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + compatible = "fsl,ls2085a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + /* + * We expect the enable-method for cpu's to be "psci", but this + * is dependent on the SoC FW, which will fill this in. + * + * Currently supported enable-method is psci v0.2 + */ + + /* We have 4 clusters having 2 Cortex-A57 cores each */ + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x1>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x100>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + }; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x200>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x201>; + }; + + cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x300>; + }; + + cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x301>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>; + /* DRAM space - 1, size : 2 GB DRAM */ + }; + + gic: interrupt-controller@6000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ + <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <1 9 0x4>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */ + <1 14 0x8>, /* Physical Non-Secure PPI, active-low */ + <1 11 0x8>, /* Virtual PPI, active-low */ + <1 10 0x8>; /* Hypervisor PPI, active-low */ + }; + + serial0: serial@21c0500 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0500 0x0 0x100>; + clock-frequency = <0>; /* Updated by bootloader */ + interrupts = <0 32 0x1>; /* edge triggered */ + }; + + serial1: serial@21c0600 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0600 0x0 0x100>; + clock-frequency = <0>; /* Updated by bootloader */ + interrupts = <0 32 0x1>; /* edge triggered */ + }; + + fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ + <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile new file mode 100644 index 0000000..3ce2462 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts new file mode 100644 index 0000000..43d5401 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -0,0 +1,38 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Eddie Huang <eddie.huang@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "mt8173.dtsi" + +/ { + model = "mediatek,mt8173-evb"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + chosen { }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi new file mode 100644 index 0000000..8554ec3 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -0,0 +1,168 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Eddie Huang <eddie.huang@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "mediatek,mt8173"; + interrupt-parent = <&sysirq>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu2>; + }; + core1 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x001>; + enable-method = "psci"; + }; + + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x100>; + enable-method = "psci"; + }; + + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x101>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci"; + method = "smc"; + cpu_suspend = <0x84000001>; + cpu_off = <0x84000002>; + cpu_on = <0x84000003>; + }; + + uart_clk: dummy26m { + compatible = "fixed-clock"; + clock-frequency = <26000000>; + #clock-cells = <0>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + sysirq: intpol-controller@10200620 { + compatible = "mediatek,mt8173-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10200620 0 0x20>; + }; + + gic: interrupt-controller@10220000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x10221000 0 0x1000>, + <0 0x10222000 0 0x2000>, + <0 0x10224000 0 0x2000>, + <0 0x10226000 0 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt8173-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x400>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt8173-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x400>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,mt8173-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x400>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart3: serial@11005000 { + compatible = "mediatek,mt8173-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11005000 0 0x400>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + }; + +}; + |