diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-09-10 20:54:48 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-09-10 20:54:48 -0700 |
commit | e90937e756938f03d37d4cae7c82316a3a425944 (patch) | |
tree | 0667f5ac6ad368278e9658ba483c79d1a60a65cd /arch/arm64/boot/dts/broadcom/stingray | |
parent | ae46654bcff303b33facbbd04a3ad9c21d303f9b (diff) | |
parent | b884026a2b80529fc7a4de729b92ee0ba555bfed (diff) | |
download | op-kernel-dev-e90937e756938f03d37d4cae7c82316a3a425944.zip op-kernel-dev-e90937e756938f03d37d4cae7c82316a3a425944.tar.gz |
Merge tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM/arm64 Devicetree updates from Olof Johansson:
"As usual, device tree updates is the bulk of our material in this
merge window. This time around, 559 patches affecting both 32- and
64-bit platforms.
Changes are too many to list individually, but some of the larger
ones:
New platform/SoC support:
- Automotive:
+ Renesas R-Car D3 (R8A77995)
+ TI DT76x
+ MediaTek mt2712e
- Communication-oriented:
+ Qualcomm IPQ8074
+ Broadcom Stingray
+ Marvell Armada 8080
- Set top box:
+ Uniphier PXs3
Besides some vendor reference boards for the SoC above, there are also
several new boards/machines:
- TI AM335x Moxa UC-8100-ME-T open platform
- TI AM57xx Beaglebone X15 Rev C
- Microchip/Atmel sama5d27 SoM1 EK
- Broadcom Raspberry Pi Zero W
- Gemini-based D-Link DIR-685 router
- Freescale i.MX6:
+ Toradex Apalis module + Apalis and Ixora carrier boards
+ Engicam GEAM6UL Starter Kit
- Freescale i.MX53-based Beckhoff CX9020 Embedded PC
- Mediatek mt7623-based BananaPi R2
- Several Allwinner-based single-board computers:
+ Cubietruck plus
+ Bananapi M3, M2M and M64
+ NanoPi A64
+ A64-OLinuXino
+ Pine64
- Rockchip RK3328 Pine64/Rock64 board support
- Rockchip RK3399 boards:
+ RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
+ Theobroma Systems RK3399-Q7 SoM
- ZTE ZX296718 PCBOX Board"
* tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits)
ARM: dts: at91: at91sam9g45: add AC97
arm64: dts: marvell: mcbin: enable more networking ports
arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
arm64: dts: marvell: add TX interrupts for PPv2.2
arm64: dts: uniphier: add PXs3 SoC support
ARM: dts: uniphier: add pinctrl groups of ethernet phy mode
ARM: dts: uniphier: fix size of sdctrl nodes
ARM: dts: uniphier: add AIDET nodes
arm64: dts: uniphier: fix size of sdctrl node
arm64: dts: uniphier: add AIDET nodes
Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2"
arm64: dts: uniphier: add reset controller node of analog amplifier
arm64: dts: marvell: add Device Tree files for Armada-8KP
arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
dt-bindings: add rk3399-q7 SoM
ARM: dts: rockchip: enable usb for rv1108-evb
ARM: dts: rockchip: add usb nodes for rv1108 SoCs
dt-bindings: update grf-binding for rv1108 SoCs
ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers
...
Diffstat (limited to 'arch/arm64/boot/dts/broadcom/stingray')
6 files changed, 618 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi index 5dca7d1..8862ec9 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi @@ -72,6 +72,78 @@ <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */ }; +&sata0 { + status = "okay"; +}; + +&sata_phy0{ + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata_phy1{ + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata_phy2{ + status = "okay"; +}; + +&sata3 { + status = "okay"; +}; + +&sata_phy3{ + status = "okay"; +}; + +&sata4 { + status = "okay"; +}; + +&sata_phy4{ + status = "okay"; +}; + +&sata5 { + status = "okay"; +}; + +&sata_phy5{ + status = "okay"; +}; + +&sata6 { + status = "okay"; +}; + +&sata_phy6{ + status = "okay"; +}; + +&sata7 { + status = "okay"; +}; + +&sata_phy7{ + status = "okay"; +}; + +&mdio_mux_iproc { + mdio@10 { + gphy0: eth-phy@10 { + reg = <0x10>; + }; + }; +}; + &uart1 { status = "okay"; }; @@ -102,6 +174,12 @@ }; }; +&enet { + phy-mode = "rgmii-id"; + phy-handle = <&gphy0>; + status = "okay"; +}; + &nand { status = "ok"; nandcs@0 { diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts index 5671669..eb6f08c 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts @@ -39,6 +39,10 @@ model = "Stingray Combo SVK (BCM958742K)"; }; +&gphy0 { + enet-phy-lane-swap; +}; + &uart2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts index 6ebe399..5084b03 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts @@ -38,3 +38,7 @@ compatible = "brcm,bcm958742t", "brcm,stingray"; model = "Stingray SST100 (BCM958742T)"; }; + +&gphy0 { + enet-phy-lane-swap; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi new file mode 100644 index 0000000..8bf1dc6 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi @@ -0,0 +1,118 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016-2017 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + fs4: fs4 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x67000000 0x00800000>; + + crypto_mbox: crypto_mbox@00000000 { + compatible = "brcm,iproc-flexrm-mbox"; + reg = <0x00000000 0x200000>; + msi-parent = <&gic_its 0x4100>; + #mbox-cells = <3>; + dma-coherent; + }; + + raid_mbox: raid_mbox@00400000 { + compatible = "brcm,iproc-flexrm-mbox"; + reg = <0x00400000 0x200000>; + dma-coherent; + msi-parent = <&gic_its 0x4300>; + #mbox-cells = <3>; + }; + + raid0: raid@0 { + compatible = "brcm,iproc-sba-v2"; + mboxes = <&raid_mbox 0 0x1 0xff00>, + <&raid_mbox 1 0x1 0xff00>, + <&raid_mbox 2 0x1 0xff00>, + <&raid_mbox 3 0x1 0xff00>; + }; + + raid1: raid@1 { + compatible = "brcm,iproc-sba-v2"; + mboxes = <&raid_mbox 4 0x1 0xff00>, + <&raid_mbox 5 0x1 0xff00>, + <&raid_mbox 6 0x1 0xff00>, + <&raid_mbox 7 0x1 0xff00>; + }; + + raid2: raid@2 { + compatible = "brcm,iproc-sba-v2"; + mboxes = <&raid_mbox 8 0x1 0xff00>, + <&raid_mbox 9 0x1 0xff00>, + <&raid_mbox 10 0x1 0xff00>, + <&raid_mbox 11 0x1 0xff00>; + }; + + raid3: raid@3 { + compatible = "brcm,iproc-sba-v2"; + mboxes = <&raid_mbox 12 0x1 0xff00>, + <&raid_mbox 13 0x1 0xff00>, + <&raid_mbox 14 0x1 0xff00>, + <&raid_mbox 15 0x1 0xff00>; + }; + + raid4: raid@4 { + compatible = "brcm,iproc-sba-v2"; + mboxes = <&raid_mbox 16 0x1 0xff00>, + <&raid_mbox 17 0x1 0xff00>, + <&raid_mbox 18 0x1 0xff00>, + <&raid_mbox 19 0x1 0xff00>; + }; + + raid5: raid@5 { + compatible = "brcm,iproc-sba-v2"; + mboxes = <&raid_mbox 20 0x1 0xff00>, + <&raid_mbox 21 0x1 0xff00>, + <&raid_mbox 22 0x1 0xff00>, + <&raid_mbox 23 0x1 0xff00>; + }; + + raid6: raid@6 { + compatible = "brcm,iproc-sba-v2"; + mboxes = <&raid_mbox 24 0x1 0xff00>, + <&raid_mbox 25 0x1 0xff00>, + <&raid_mbox 26 0x1 0xff00>, + <&raid_mbox 27 0x1 0xff00>; + }; + + raid7: raid@7 { + compatible = "brcm,iproc-sba-v2"; + mboxes = <&raid_mbox 28 0x1 0xff00>, + <&raid_mbox 29 0x1 0xff00>, + <&raid_mbox 30 0x1 0xff00>, + <&raid_mbox 31 0x1 0xff00>; + }; + }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi new file mode 100644 index 0000000..a774709 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi @@ -0,0 +1,278 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016-2017 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + sata { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x67d00000 0x00800000>; + + sata0: ahci@00210000 { + compatible = "brcm,iproc-ahci", "generic-ahci"; + reg = <0x00210000 0x1000>; + reg-names = "ahci"; + interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata0_port0: sata-port@0 { + reg = <0>; + phys = <&sata0_phy0>; + phy-names = "sata-phy"; + }; + }; + + sata_phy0: sata_phy@00212100 { + compatible = "brcm,iproc-sr-sata-phy"; + reg = <0x00212100 0x1000>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata0_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + }; + + sata1: ahci@00310000 { + compatible = "brcm,iproc-ahci", "generic-ahci"; + reg = <0x00310000 0x1000>; + reg-names = "ahci"; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata1_port0: sata-port@0 { + reg = <0>; + phys = <&sata1_phy0>; + phy-names = "sata-phy"; + }; + }; + + sata_phy1: sata_phy@00312100 { + compatible = "brcm,iproc-sr-sata-phy"; + reg = <0x00312100 0x1000>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata1_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + }; + + sata2: ahci@00120000 { + compatible = "brcm,iproc-ahci", "generic-ahci"; + reg = <0x00120000 0x1000>; + reg-names = "ahci"; + interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata2_port0: sata-port@0 { + reg = <0>; + phys = <&sata2_phy0>; + phy-names = "sata-phy"; + }; + }; + + sata_phy2: sata_phy@00122100 { + compatible = "brcm,iproc-sr-sata-phy"; + reg = <0x00122100 0x1000>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata2_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + }; + + sata3: ahci@00130000 { + compatible = "brcm,iproc-ahci", "generic-ahci"; + reg = <0x00130000 0x1000>; + reg-names = "ahci"; + interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata3_port0: sata-port@0 { + reg = <0>; + phys = <&sata3_phy0>; + phy-names = "sata-phy"; + }; + }; + + sata_phy3: sata_phy@00132100 { + compatible = "brcm,iproc-sr-sata-phy"; + reg = <0x00132100 0x1000>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata3_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + }; + + sata4: ahci@00330000 { + compatible = "brcm,iproc-ahci", "generic-ahci"; + reg = <0x00330000 0x1000>; + reg-names = "ahci"; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata4_port0: sata-port@0 { + reg = <0>; + phys = <&sata4_phy0>; + phy-names = "sata-phy"; + }; + }; + + sata_phy4: sata_phy@00332100 { + compatible = "brcm,iproc-sr-sata-phy"; + reg = <0x00332100 0x1000>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata4_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + }; + + sata5: ahci@00400000 { + compatible = "brcm,iproc-ahci", "generic-ahci"; + reg = <0x00400000 0x1000>; + reg-names = "ahci"; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata5_port0: sata-port@0 { + reg = <0>; + phys = <&sata5_phy0>; + phy-names = "sata-phy"; + }; + }; + + sata_phy5: sata_phy@00402100 { + compatible = "brcm,iproc-sr-sata-phy"; + reg = <0x00402100 0x1000>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata5_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + }; + + sata6: ahci@00410000 { + compatible = "brcm,iproc-ahci", "generic-ahci"; + reg = <0x00410000 0x1000>; + reg-names = "ahci"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata6_port0: sata-port@0 { + reg = <0>; + phys = <&sata6_phy0>; + phy-names = "sata-phy"; + }; + }; + + sata_phy6: sata_phy@00412100 { + compatible = "brcm,iproc-sr-sata-phy"; + reg = <0x00412100 0x1000>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata6_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + }; + + sata7: ahci@00420000 { + compatible = "brcm,iproc-ahci", "generic-ahci"; + reg = <0x00420000 0x1000>; + reg-names = "ahci"; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata7_port0: sata-port@0 { + reg = <0>; + phys = <&sata7_phy0>; + phy-names = "sata-phy"; + }; + }; + + sata_phy7: sata_phy@00422100 { + compatible = "brcm,iproc-sr-sata-phy"; + reg = <0x00422100 0x1000>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata7_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + }; + }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index 49933cf..e6f75c6 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -152,6 +152,12 @@ #size-cells = <1>; ranges = <0x0 0x0 0x61000000 0x05000000>; + ccn: ccn@00000000 { + compatible = "arm,ccn-502"; + reg = <0x00000000 0x900000>; + interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>; + }; + gic: interrupt-controller@02c00000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; @@ -261,6 +267,9 @@ }; }; + #include "stingray-fs4.dtsi" + #include "stingray-sata.dtsi" + hsls { compatible = "simple-bus"; #address-cells = <1>; @@ -269,6 +278,37 @@ #include "stingray-pinctrl.dtsi" + mdio_mux_iproc: mdio-mux@0002023c { + compatible = "brcm,mdio-mux-iproc"; + reg = <0x0002023c 0x14>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { /* PCIe serdes */ + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@2 { /* SATA */ + reg = <0x2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@3 { /* USB */ + reg = <0x3>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@10 { /* RGMII */ + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + pwm: pwm@00010000 { compatible = "brcm,iproc-pwm"; reg = <0x00010000 0x1000>; @@ -277,6 +317,93 @@ status = "disabled"; }; + timer0: timer@00030000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00030000 0x1000>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsls_25m_div2_clk>, + <&hsls_25m_div2_clk>, + <&hsls_div4_clk>; + clock-names = "timer1", "timer2", "apb_pclk"; + status = "disabled"; + }; + + timer1: timer@00040000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00040000 0x1000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsls_25m_div2_clk>, + <&hsls_25m_div2_clk>, + <&hsls_div4_clk>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + timer2: timer@00050000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00050000 0x1000>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsls_25m_div2_clk>, + <&hsls_25m_div2_clk>, + <&hsls_div4_clk>; + clock-names = "timer1", "timer2", "apb_pclk"; + status = "disabled"; + }; + + timer3: timer@00060000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00060000 0x1000>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsls_25m_div2_clk>, + <&hsls_25m_div2_clk>, + <&hsls_div4_clk>; + clock-names = "timer1", "timer2", "apb_pclk"; + status = "disabled"; + }; + + timer4: timer@00070000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00070000 0x1000>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsls_25m_div2_clk>, + <&hsls_25m_div2_clk>, + <&hsls_div4_clk>; + clock-names = "timer1", "timer2", "apb_pclk"; + status = "disabled"; + }; + + timer5: timer@00080000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00080000 0x1000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsls_25m_div2_clk>, + <&hsls_25m_div2_clk>, + <&hsls_div4_clk>; + clock-names = "timer1", "timer2", "apb_pclk"; + status = "disabled"; + }; + + timer6: timer@00090000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00090000 0x1000>; + interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsls_25m_div2_clk>, + <&hsls_25m_div2_clk>, + <&hsls_div4_clk>; + clock-names = "timer1", "timer2", "apb_pclk"; + status = "disabled"; + }; + + timer7: timer@000a0000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x000a0000 0x1000>; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsls_25m_div2_clk>, + <&hsls_25m_div2_clk>, + <&hsls_div4_clk>; + clock-names = "timer1", "timer2", "apb_pclk"; + status = "disabled"; + }; + i2c0: i2c@000b0000 { compatible = "brcm,iproc-i2c"; reg = <0x000b0000 0x100>; @@ -424,6 +551,15 @@ iommus = <&smmu 0x6000 0x0000>; }; + enet: ethernet@00340000{ + compatible = "brcm,amac"; + reg = <0x00340000 0x1000>; + reg-names = "amac_base"; + dma-coherent; + interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; + status= "disabled"; + }; + nand: nand@00360000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x00360000 0x600>, |