Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Arnd Bergmann:
 "These are all the updates to device tree files for 32-bit platforms,
  plus a couple of related 64-bit updates:

  New SoC support:
   - Allwinner A83T
   - Axis Artpec-6 SoC
   - Mediatek MT7623 SoC
   - TI Keystone K2G SoC
   - ST Microelectronics stm32f469

  New board or machine support:
   - ARM Juno R2
   - Buffalo Linkstation LS-QVL and LS-GL
   - Cubietruck plus
   - D-Link DIR-885L
   - DT support for ARM RealView PB1176 and PB11MPCore
   - Google Nexus 7
   - Homlet v2
   - Itead Ibox
   - Lamobo R1
   - LG Optimus Black
   - Logicpd dm3730
   - Raspberry Pi Model A

  Other changes include
   - Lots of updates for Qualcomm APQ8064, MSM8974 and others
   - Improved support for Nokia N900 and other OMAP machines
   - Common clk support for lpc32xx
   - HDLCD display on ARM
   - Improved stm32f429 support
   - Improved Renesas device support, r8a779x and others
   - Lots of Rockchip updates
   - Samsung cleanups
   - ADC support for Atmel SAMA5D2
   - BCM2835 (Raspberry Pi) improvements
   - Broadcom Northstar Plus enhancements
   - OMAP GPMC rework
   - Several improvements for Atmel SAMA5D2 / Xplained
   - Global change to remove inofficial "arm,amba-bus" compatible
     string"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (350 commits)
  ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus"
  ARM: dts: artpec: dual-license on artpec6.dtsi
  ARM: dts: ux500: add synaptics RMI4 for Ux500 TVK DT
  arm64: dts: juno/vexpress: fix node name unit-address presence warnings
  arm64: dts: foundation-v8: add SBSA Generic Watchdog device node
  ARM: dts: at91: sama5d2 Xplained: add leds node
  ARM: dts: at91: sama5d2 Xplained: add user push button
  ARM: dts: at91: sama5d2 Xplained: set pin muxing for usb gadget and usb host
  ARM: dts: stm32f429: Enable Ethernet on Eval board
  ARM: dts: omap3-sniper: TWL4030 keypad support
  Revert "ARM: dts: DRA7: Add dt nodes for PWMSS"
  ARM: dts: dm814x: dra62x: Disable wait pin monitoring for NAND
  ARM: dts: dm814x: dra62x: Fix NAND device nodes
  ARM: dts: stm32f429: Add Ethernet support
  ARM: dts: stm32f429: Add system config bank node
  ARM: dts: at91: sama5d2: add nand0 and nfc0 nodes
  ARM: dts: at91: sama5d2: add dma properties to UART nodes
  ARM: dts: at91: sama5d2 Xplained: Correct the macb irq pinctrl node
  ARM: dts: exynos: Don't overheat the Odroid XU3-Lite on high load
  ARM: dts: exynos: Add cooling levels for Exynos5422/5800 CPUs
  ...

1 files changed, 16 insertions, 16 deletions

diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index 413f1b9..3ad4c30 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -46,7 +46,7 @@
 			arm,vexpress,site = <0>;
 			arm,v2m-memory-map = "rs1";
 
-			mb_fixed_3v3: fixedregulator@0 {
+			mb_fixed_3v3: mcc-sb-3v3 {
 				compatible = "regulator-fixed";
 				regulator-name = "MCC_SB_3V3";
 				regulator-min-microvolt = <3300000>;
@@ -59,42 +59,42 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				button@1 {
+				power-button {
 					debounce_interval = <50>;
 					wakeup-source;
 					linux,code = <116>;
 					label = "POWER";
 					gpios = <&iofpga_gpio0 0 0x4>;
 				};
-				button@2 {
+				home-button {
 					debounce_interval = <50>;
 					wakeup-source;
 					linux,code = <102>;
 					label = "HOME";
 					gpios = <&iofpga_gpio0 1 0x4>;
 				};
-				button@3 {
+				rlock-button {
 					debounce_interval = <50>;
 					wakeup-source;
 					linux,code = <152>;
 					label = "RLOCK";
 					gpios = <&iofpga_gpio0 2 0x4>;
 				};
-				button@4 {
+				vol-up-button {
 					debounce_interval = <50>;
 					wakeup-source;
 					linux,code = <115>;
 					label = "VOL+";
 					gpios = <&iofpga_gpio0 3 0x4>;
 				};
-				button@5 {
+				vol-down-button {
 					debounce_interval = <50>;
 					wakeup-source;
 					linux,code = <114>;
 					label = "VOL-";
 					gpios = <&iofpga_gpio0 4 0x4>;
 				};
-				button@6 {
+				nmi-button {
 					debounce_interval = <50>;
 					wakeup-source;
 					linux,code = <99>;
@@ -139,7 +139,7 @@
 			};
 
 			iofpga@3,00000000 {
-				compatible = "arm,amba-bus", "simple-bus";
+				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges = <0 3 0 0x200000>;
@@ -159,7 +159,7 @@
 					compatible = "syscon", "simple-mfd";
 					reg = <0x010000 0x1000>;
 
-					led@08.0 {
+					led0 {
 						compatible = "register-bit-led";
 						offset = <0x08>;
 						mask = <0x01>;
@@ -167,7 +167,7 @@
 						linux,default-trigger = "heartbeat";
 						default-state = "on";
 					};
-					led@08.1 {
+					led1 {
 						compatible = "register-bit-led";
 						offset = <0x08>;
 						mask = <0x02>;
@@ -175,7 +175,7 @@
 						linux,default-trigger = "mmc0";
 						default-state = "off";
 					};
-					led@08.2 {
+					led2 {
 						compatible = "register-bit-led";
 						offset = <0x08>;
 						mask = <0x04>;
@@ -183,7 +183,7 @@
 						linux,default-trigger = "cpu0";
 						default-state = "off";
 					};
-					led@08.3 {
+					led3 {
 						compatible = "register-bit-led";
 						offset = <0x08>;
 						mask = <0x08>;
@@ -191,7 +191,7 @@
 						linux,default-trigger = "cpu1";
 						default-state = "off";
 					};
-					led@08.4 {
+					led4 {
 						compatible = "register-bit-led";
 						offset = <0x08>;
 						mask = <0x10>;
@@ -199,7 +199,7 @@
 						linux,default-trigger = "cpu2";
 						default-state = "off";
 					};
-					led@08.5 {
+					led5 {
 						compatible = "register-bit-led";
 						offset = <0x08>;
 						mask = <0x20>;
@@ -207,14 +207,14 @@
 						linux,default-trigger = "cpu3";
 						default-state = "off";
 					};
-					led@08.6 {
+					led6 {
 						compatible = "register-bit-led";
 						offset = <0x08>;
 						mask = <0x40>;
 						label = "vexpress:6";
 						default-state = "off";
 					};
-					led@08.7 {
+					led7 {
 						compatible = "register-bit-led";
 						offset = <0x08>;
 						mask = <0x80>;