Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 279 insertions, 0 deletions

diff --git a/arch/arm26/lib/kbd.c b/arch/arm26/lib/kbd.c
new file mode 100644
index 0000000..22d2c93
--- /dev/null
+++ b/arch/arm26/lib/kbd.c
@@ -0,0 +1,279 @@
+#include <linux/config.h>
+#include <linux/kd.h>
+//#include <linux/kbd_ll.h>
+#include <linux/kbd_kern.h>
+
+/*
+ * Translation of escaped scancodes to keycodes.
+ * This is now user-settable.
+ * The keycodes 1-88,96-111,119 are fairly standard, and
+ * should probably not be changed - changing might confuse X.
+ * X also interprets scancode 0x5d (KEY_Begin).
+ *
+ * For 1-88 keycode equals scancode.
+ */
+
+#define E0_KPENTER 96
+#define E0_RCTRL   97
+#define E0_KPSLASH 98
+#define E0_PRSCR   99
+#define E0_RALT    100
+#define E0_BREAK   101		/* (control-pause) */
+#define E0_HOME    102
+#define E0_UP      103
+#define E0_PGUP    104
+#define E0_LEFT    105
+#define E0_RIGHT   106
+#define E0_END     107
+#define E0_DOWN    108
+#define E0_PGDN    109
+#define E0_INS     110
+#define E0_DEL     111
+
+/* for USB 106 keyboard */
+#define E0_YEN         124
+#define E0_BACKSLASH   89
+
+
+#define E1_PAUSE   119
+
+/*
+ * The keycodes below are randomly located in 89-95,112-118,120-127.
+ * They could be thrown away (and all occurrences below replaced by 0),
+ * but that would force many users to use the `setkeycodes' utility, where
+ * they needed not before. It does not matter that there are duplicates, as
+ * long as no duplication occurs for any single keyboard.
+ */
+#define SC_LIM 89
+
+#define FOCUS_PF1 85		/* actual code! */
+#define FOCUS_PF2 89
+#define FOCUS_PF3 90
+#define FOCUS_PF4 91
+#define FOCUS_PF5 92
+#define FOCUS_PF6 93
+#define FOCUS_PF7 94
+#define FOCUS_PF8 95
+#define FOCUS_PF9 120
+#define FOCUS_PF10 121
+#define FOCUS_PF11 122
+#define FOCUS_PF12 123
+
+#define JAP_86     124
+/* tfj@olivia.ping.dk:
+ * The four keys are located over the numeric keypad, and are
+ * labelled A1-A4. It's an rc930 keyboard, from
+ * Regnecentralen/RC International, Now ICL.
+ * Scancodes: 59, 5a, 5b, 5c.
+ */
+#define RGN1 124
+#define RGN2 125
+#define RGN3 126
+#define RGN4 127
+
+static unsigned char high_keys[128 - SC_LIM] = {
+	RGN1, RGN2, RGN3, RGN4, 0, 0, 0,	/* 0x59-0x5f */
+	0, 0, 0, 0, 0, 0, 0, 0,	/* 0x60-0x67 */
+	0, 0, 0, 0, 0, FOCUS_PF11, 0, FOCUS_PF12,	/* 0x68-0x6f */
+	0, 0, 0, FOCUS_PF2, FOCUS_PF9, 0, 0, FOCUS_PF3,	/* 0x70-0x77 */
+	FOCUS_PF4, FOCUS_PF5, FOCUS_PF6, FOCUS_PF7,	/* 0x78-0x7b */
+	FOCUS_PF8, JAP_86, FOCUS_PF10, 0	/* 0x7c-0x7f */
+};
+
+/* BTC */
+#define E0_MACRO   112
+/* LK450 */
+#define E0_F13     113
+#define E0_F14     114
+#define E0_HELP    115
+#define E0_DO      116
+#define E0_F17     117
+#define E0_KPMINPLUS 118
+/*
+ * My OmniKey generates e0 4c for  the "OMNI" key and the
+ * right alt key does nada. [kkoller@nyx10.cs.du.edu]
+ */
+#define E0_OK  124
+/*
+ * New microsoft keyboard is rumoured to have
+ * e0 5b (left window button), e0 5c (right window button),
+ * e0 5d (menu button). [or: LBANNER, RBANNER, RMENU]
+ * [or: Windows_L, Windows_R, TaskMan]
+ */
+#define E0_MSLW        125
+#define E0_MSRW        126
+#define E0_MSTM        127
+
+static unsigned char e0_keys[128] = {
+	0, 0, 0, 0, 0, 0, 0, 0,	/* 0x00-0x07 */
+	0, 0, 0, 0, 0, 0, 0, 0,	/* 0x08-0x0f */
+	0, 0, 0, 0, 0, 0, 0, 0,	/* 0x10-0x17 */
+	0, 0, 0, 0, E0_KPENTER, E0_RCTRL, 0, 0,	/* 0x18-0x1f */
+	0, 0, 0, 0, 0, 0, 0, 0,	/* 0x20-0x27 */
+	0, 0, 0, 0, 0, 0, 0, 0,	/* 0x28-0x2f */
+	0, 0, 0, 0, 0, E0_KPSLASH, 0, E0_PRSCR,	/* 0x30-0x37 */
+	E0_RALT, 0, 0, 0, 0, E0_F13, E0_F14, E0_HELP,	/* 0x38-0x3f */
+	E0_DO, E0_F17, 0, 0, 0, 0, E0_BREAK, E0_HOME,	/* 0x40-0x47 */
+	E0_UP, E0_PGUP, 0, E0_LEFT, E0_OK, E0_RIGHT, E0_KPMINPLUS, E0_END,	/* 0x48-0x4f */
+	E0_DOWN, E0_PGDN, E0_INS, E0_DEL, 0, 0, 0, 0,	/* 0x50-0x57 */
+	0, 0, 0, E0_MSLW, E0_MSRW, E0_MSTM, 0, 0,	/* 0x58-0x5f */
+	0, 0, 0, 0, 0, 0, 0, 0,	/* 0x60-0x67 */
+	0, 0, 0, 0, 0, 0, 0, E0_MACRO,	/* 0x68-0x6f */
+	//0, 0, 0, 0, 0, 0, 0, 0,                          /* 0x70-0x77 */
+	0, 0, 0, 0, 0, E0_BACKSLASH, 0, 0,	/* 0x70-0x77 */
+	0, 0, 0, E0_YEN, 0, 0, 0, 0	/* 0x78-0x7f */
+};
+
+static int gen_setkeycode(unsigned int scancode, unsigned int keycode)
+{
+	if (scancode < SC_LIM || scancode > 255 || keycode > 127)
+		return -EINVAL;
+	if (scancode < 128)
+		high_keys[scancode - SC_LIM] = keycode;
+	else
+		e0_keys[scancode - 128] = keycode;
+	return 0;
+}
+
+static int gen_getkeycode(unsigned int scancode)
+{
+	return
+	    (scancode < SC_LIM || scancode > 255) ? -EINVAL :
+	    (scancode <
+	     128) ? high_keys[scancode - SC_LIM] : e0_keys[scancode - 128];
+}
+
+static int
+gen_translate(unsigned char scancode, unsigned char *keycode, char raw_mode)
+{
+	static int prev_scancode;
+
+	/* special prefix scancodes.. */
+	if (scancode == 0xe0 || scancode == 0xe1) {
+		prev_scancode = scancode;
+		return 0;
+	}
+
+	/* 0xFF is sent by a few keyboards, ignore it. 0x00 is error */
+	if (scancode == 0x00 || scancode == 0xff) {
+		prev_scancode = 0;
+		return 0;
+	}
+
+	scancode &= 0x7f;
+
+	if (prev_scancode) {
+		/*
+		 * usually it will be 0xe0, but a Pause key generates
+		 * e1 1d 45 e1 9d c5 when pressed, and nothing when released
+		 */
+		if (prev_scancode != 0xe0) {
+			if (prev_scancode == 0xe1 && scancode == 0x1d) {
+				prev_scancode = 0x100;
+				return 0;
+			}
+				else if (prev_scancode == 0x100
+					 && scancode == 0x45) {
+				*keycode = E1_PAUSE;
+				prev_scancode = 0;
+			} else {
+#ifdef KBD_REPORT_UNKN
+				if (!raw_mode)
+					printk(KERN_INFO
+					       "keyboard: unknown e1 escape sequence\n");
+#endif
+				prev_scancode = 0;
+				return 0;
+			}
+		} else {
+			prev_scancode = 0;
+			/*
+			 *  The keyboard maintains its own internal caps lock and
+			 *  num lock statuses. In caps lock mode E0 AA precedes make
+			 *  code and E0 2A follows break code. In num lock mode,
+			 *  E0 2A precedes make code and E0 AA follows break code.
+			 *  We do our own book-keeping, so we will just ignore these.
+			 */
+			/*
+			 *  For my keyboard there is no caps lock mode, but there are
+			 *  both Shift-L and Shift-R modes. The former mode generates
+			 *  E0 2A / E0 AA pairs, the latter E0 B6 / E0 36 pairs.
+			 *  So, we should also ignore the latter. - aeb@cwi.nl
+			 */
+			if (scancode == 0x2a || scancode == 0x36)
+				return 0;
+
+			if (e0_keys[scancode])
+				*keycode = e0_keys[scancode];
+			else {
+#ifdef KBD_REPORT_UNKN
+				if (!raw_mode)
+					printk(KERN_INFO
+					       "keyboard: unknown scancode e0 %02x\n",
+					       scancode);
+#endif
+				return 0;
+			}
+		}
+	} else if (scancode >= SC_LIM) {
+		/* This happens with the FOCUS 9000 keyboard
+		   Its keys PF1..PF12 are reported to generate
+		   55 73 77 78 79 7a 7b 7c 74 7e 6d 6f
+		   Moreover, unless repeated, they do not generate
+		   key-down events, so we have to zero up_flag below */
+		/* Also, Japanese 86/106 keyboards are reported to
+		   generate 0x73 and 0x7d for \ - and \ | respectively. */
+		/* Also, some Brazilian keyboard is reported to produce
+		   0x73 and 0x7e for \ ? and KP-dot, respectively. */
+
+		*keycode = high_keys[scancode - SC_LIM];
+
+		if (!*keycode) {
+			if (!raw_mode) {
+#ifdef KBD_REPORT_UNKN
+				printk(KERN_INFO
+				       "keyboard: unrecognized scancode (%02x)"
+				       " - ignored\n", scancode);
+#endif
+			}
+			return 0;
+		}
+	} else
+		*keycode = scancode;
+	return 1;
+}
+
+static char gen_unexpected_up(unsigned char keycode)
+{
+	/* unexpected, but this can happen: maybe this was a key release for a
+	   FOCUS 9000 PF key; if we want to see it, we have to clear up_flag */
+	if (keycode >= SC_LIM || keycode == 85)
+		return 0;
+	else
+		return 0200;
+}
+
+/*
+ * These are the default mappings
+ */
+int  (*k_setkeycode)(unsigned int, unsigned int) = gen_setkeycode;
+int  (*k_getkeycode)(unsigned int) = gen_getkeycode;
+int  (*k_translate)(unsigned char, unsigned char *, char) = gen_translate;
+char (*k_unexpected_up)(unsigned char) = gen_unexpected_up;
+void (*k_leds)(unsigned char);
+
+/* Simple translation table for the SysRq keys */
+
+#ifdef CONFIG_MAGIC_SYSRQ
+static unsigned char gen_sysrq_xlate[128] =
+	"\000\0331234567890-=\177\t"	/* 0x00 - 0x0f */
+	"qwertyuiop[]\r\000as"	/* 0x10 - 0x1f */
+	"dfghjkl;'`\000\\zxcv"	/* 0x20 - 0x2f */
+	"bnm,./\000*\000 \000\201\202\203\204\205"	/* 0x30 - 0x3f */
+	"\206\207\210\211\212\000\000789-456+1"	/* 0x40 - 0x4f */
+	"230\177\000\000\213\214\000\000\000\000\000\000\000\000\000\000"	/* 0x50 - 0x5f */
+	"\r\000/";			/* 0x60 - 0x6f */
+
+unsigned char *k_sysrq_xlate = gen_sysrq_xlate;
+int k_sysrq_key = 0x54;
+#endif