Remove the arm26 port

The arm26 port has been in a state where it was far from even compiling
for quite some time.

Ian Molton agreed with the removal.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 0 insertions, 722 deletions

diff --git a/arch/arm26/kernel/irq.c b/arch/arm26/kernel/irq.c
deleted file mode 100644
index 2ffe695..0000000
--- a/arch/arm26/kernel/irq.c
+++ /dev/null
@@ -1,722 +0,0 @@
-/*
- *  linux/arch/arm/kernel/irq.c
- *
- *  Copyright (C) 1992 Linus Torvalds
- *  Modifications for ARM processor Copyright (C) 1995-2000 Russell King.
- *  'Borrowed' for ARM26 and (C) 2003 Ian Molton.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file contains the code used by various IRQ handling routines:
- *  asking for different IRQ's should be done through these routines
- *  instead of just grabbing them. Thus setups with different IRQ numbers
- *  shouldn't result in any weird surprises, and installing new handlers
- *  should be easier.
- *
- *  IRQ's are in fact implemented a bit like signal handlers for the kernel.
- *  Naturally it's not a 1:1 relation, but there are similarities.
- */
-#include <linux/module.h>
-#include <linux/ptrace.h>
-#include <linux/kernel_stat.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/seq_file.h>
-#include <linux/errno.h>
-
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/irqchip.h>
-
-//FIXME - this ought to be in a header IMO
-void __init arc_init_irq(void);
-
-/*
- * Maximum IRQ count.  Currently, this is arbitary.  However, it should
- * not be set too low to prevent false triggering.  Conversely, if it
- * is set too high, then you could miss a stuck IRQ.
- *
- * FIXME Maybe we ought to set a timer and re-enable the IRQ at a later time?
- */
-#define MAX_IRQ_CNT	100000
-
-static volatile unsigned long irq_err_count;
-static DEFINE_SPINLOCK(irq_controller_lock);
-
-struct irqdesc irq_desc[NR_IRQS];
-
-/*
- * Dummy mask/unmask handler
- */
-void dummy_mask_unmask_irq(unsigned int irq)
-{
-}
-
-void do_bad_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
-{
-	irq_err_count += 1;
-	printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq);
-}
-
-static struct irqchip bad_chip = {
-	.ack	= dummy_mask_unmask_irq,
-	.mask	= dummy_mask_unmask_irq,
-	.unmask = dummy_mask_unmask_irq,
-};
-
-static struct irqdesc bad_irq_desc = {
-	.chip	= &bad_chip,
-	.handle = do_bad_IRQ,
-	.depth	= 1,
-};
-
-/**
- *	disable_irq - disable an irq and wait for completion
- *	@irq: Interrupt to disable
- *
- *	Disable the selected interrupt line.  We do this lazily.
- *
- *	This function may be called from IRQ context.
- */
-void disable_irq(unsigned int irq)
-{
-	struct irqdesc *desc = irq_desc + irq;
-	unsigned long flags;
-	spin_lock_irqsave(&irq_controller_lock, flags);
-	if (!desc->depth++)
-		desc->enabled = 0;
-	spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-EXPORT_SYMBOL(disable_irq);
-
-void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq")));
-
-EXPORT_SYMBOL(disable_irq_nosync);
-
-/**
- *	enable_irq - enable interrupt handling on an irq
- *	@irq: Interrupt to enable
- *
- *	Re-enables the processing of interrupts on this IRQ line.
- *	Note that this may call the interrupt handler, so you may
- *	get unexpected results if you hold IRQs disabled.
- *
- *	This function may be called from IRQ context.
- */
-void enable_irq(unsigned int irq)
-{
-	struct irqdesc *desc = irq_desc + irq;
-	unsigned long flags;
-	int pending = 0;
-
-	spin_lock_irqsave(&irq_controller_lock, flags);
-	if (unlikely(!desc->depth)) {
-		printk("enable_irq(%u) unbalanced from %p\n", irq,
-			__builtin_return_address(0)); //FIXME bum addresses reported - why?
-	} else if (!--desc->depth) {
-		desc->probing = 0;
-		desc->enabled = 1;
-		desc->chip->unmask(irq);
-		pending = desc->pending;
-		desc->pending = 0;
-		/*
-		 * If the interrupt was waiting to be processed,
-		 * retrigger it.
-		 */
-		if (pending)
-			desc->chip->rerun(irq);
-	}
-	spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-EXPORT_SYMBOL(enable_irq);
-
-int show_interrupts(struct seq_file *p, void *v)
-{
-	int i = *(loff_t *) v;
-	struct irqaction * action;
-
-	if (i < NR_IRQS) {
-	    	action = irq_desc[i].action;
-		if (!action)
-			goto out;
-		seq_printf(p, "%3d: %10u ", i, kstat_irqs(i));
-		seq_printf(p, "  %s", action->name);
-		for (action = action->next; action; action = action->next) {
-			seq_printf(p, ", %s", action->name);
-		}
-		seq_putc(p, '\n');
-	} else if (i == NR_IRQS) {
-		show_fiq_list(p, v);
-		seq_printf(p, "Err: %10lu\n", irq_err_count);
-	}
-out:
-	return 0;
-}
-
-/*
- * IRQ lock detection.
- *
- * Hopefully, this should get us out of a few locked situations.
- * However, it may take a while for this to happen, since we need
- * a large number if IRQs to appear in the same jiffie with the
- * same instruction pointer (or within 2 instructions).
- */
-static int check_irq_lock(struct irqdesc *desc, int irq, struct pt_regs *regs)
-{
-	unsigned long instr_ptr = instruction_pointer(regs);
-
-	if (desc->lck_jif == jiffies &&
-	    desc->lck_pc >= instr_ptr && desc->lck_pc < instr_ptr + 8) {
-		desc->lck_cnt += 1;
-
-		if (desc->lck_cnt > MAX_IRQ_CNT) {
-			printk(KERN_ERR "IRQ LOCK: IRQ%d is locking the system, disabled\n", irq);
-			return 1;
-		}
-	} else {
-		desc->lck_cnt = 0;
-		desc->lck_pc  = instruction_pointer(regs);
-		desc->lck_jif = jiffies;
-	}
-	return 0;
-}
-
-static void
-__do_irq(unsigned int irq, struct irqaction *action, struct pt_regs *regs)
-{
-	unsigned int status;
-	int ret;
-
-	spin_unlock(&irq_controller_lock);
-	if (!(action->flags & IRQF_DISABLED))
-		local_irq_enable();
-
-	status = 0;
-	do {
-		ret = action->handler(irq, action->dev_id, regs);
-		if (ret == IRQ_HANDLED)
-			status |= action->flags;
-		action = action->next;
-	} while (action);
-
-	if (status & IRQF_SAMPLE_RANDOM)
-		add_interrupt_randomness(irq);
-
-	spin_lock_irq(&irq_controller_lock);
-}
-
-/*
- * This is for software-decoded IRQs.  The caller is expected to
- * handle the ack, clear, mask and unmask issues.
- */
-void
-do_simple_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
-{
-	struct irqaction *action;
-	const int cpu = smp_processor_id();
-
-	desc->triggered = 1;
-
-	kstat_cpu(cpu).irqs[irq]++;
-
-	action = desc->action;
-	if (action)
-		__do_irq(irq, desc->action, regs);
-}
-
-/*
- * Most edge-triggered IRQ implementations seem to take a broken
- * approach to this.  Hence the complexity.
- */
-void
-do_edge_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
-{
-	const int cpu = smp_processor_id();
-
-	desc->triggered = 1;
-
-	/*
-	 * If we're currently running this IRQ, or its disabled,
-	 * we shouldn't process the IRQ.  Instead, turn on the
-	 * hardware masks.
-	 */
-	if (unlikely(desc->running || !desc->enabled))
-		goto running;
-
-	/*
-	 * Acknowledge and clear the IRQ, but don't mask it.
-	 */
-	desc->chip->ack(irq);
-
-	/*
-	 * Mark the IRQ currently in progress.
-	 */
-	desc->running = 1;
-
-	kstat_cpu(cpu).irqs[irq]++;
-
-	do {
-		struct irqaction *action;
-
-		action = desc->action;
-		if (!action)
-			break;
-
-		if (desc->pending && desc->enabled) {
-			desc->pending = 0;
-			desc->chip->unmask(irq);
-		}
-
-		__do_irq(irq, action, regs);
-	} while (desc->pending);
-
-	desc->running = 0;
-
-	/*
-	 * If we were disabled or freed, shut down the handler.
-	 */
-	if (likely(desc->action && !check_irq_lock(desc, irq, regs)))
-		return;
-
- running:
-	/*
-	 * We got another IRQ while this one was masked or
-	 * currently running.  Delay it.
-	 */
-	desc->pending = 1;
-	desc->chip->mask(irq);
-	desc->chip->ack(irq);
-}
-
-/*
- * Level-based IRQ handler.  Nice and simple.
- */
-void
-do_level_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
-{
-	struct irqaction *action;
-	const int cpu = smp_processor_id();
-
-	desc->triggered = 1;
-
-	/*
-	 * Acknowledge, clear _AND_ disable the interrupt.
-	 */
-	desc->chip->ack(irq);
-
-	if (likely(desc->enabled)) {
-		kstat_cpu(cpu).irqs[irq]++;
-
-		/*
-		 * Return with this interrupt masked if no action
-		 */
-		action = desc->action;
-		if (action) {
-			__do_irq(irq, desc->action, regs);
-
-			if (likely(desc->enabled &&
-				   !check_irq_lock(desc, irq, regs)))
-				desc->chip->unmask(irq);
-		}
-	}
-}
-
-/*
- * do_IRQ handles all hardware IRQ's.  Decoded IRQs should not
- * come via this function.  Instead, they should provide their
- * own 'handler'
- */
-asmlinkage void asm_do_IRQ(int irq, struct pt_regs *regs)
-{
-	struct irqdesc *desc = irq_desc + irq;
-
-	/*
-	 * Some hardware gives randomly wrong interrupts.  Rather
-	 * than crashing, do something sensible.
-	 */
-	if (irq >= NR_IRQS)
-		desc = &bad_irq_desc;
-
-	irq_enter();
-	spin_lock(&irq_controller_lock);
-	desc->handle(irq, desc, regs);
-	spin_unlock(&irq_controller_lock);
-	irq_exit();
-}
-
-void __set_irq_handler(unsigned int irq, irq_handler_t handle, int is_chained)
-{
-	struct irqdesc *desc;
-	unsigned long flags;
-
-	if (irq >= NR_IRQS) {
-		printk(KERN_ERR "Trying to install handler for IRQ%d\n", irq);
-		return;
-	}
-
-	if (handle == NULL)
-		handle = do_bad_IRQ;
-
-	desc = irq_desc + irq;
-
-	if (is_chained && desc->chip == &bad_chip)
-		printk(KERN_WARNING "Trying to install chained handler for IRQ%d\n", irq);
-
-	spin_lock_irqsave(&irq_controller_lock, flags);
-	if (handle == do_bad_IRQ) {
-		desc->chip->mask(irq);
-		desc->chip->ack(irq);
-		desc->depth = 1;
-		desc->enabled = 0;
-	}
-	desc->handle = handle;
-	if (handle != do_bad_IRQ && is_chained) {
-		desc->valid = 0;
-		desc->probe_ok = 0;
-		desc->depth = 0;
-		desc->chip->unmask(irq);
-	}
-	spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-
-void set_irq_chip(unsigned int irq, struct irqchip *chip)
-{
-	struct irqdesc *desc;
-	unsigned long flags;
-
-	if (irq >= NR_IRQS) {
-		printk(KERN_ERR "Trying to install chip for IRQ%d\n", irq);
-		return;
-	}
-
-	if (chip == NULL)
-		chip = &bad_chip;
-
-	desc = irq_desc + irq;
-	spin_lock_irqsave(&irq_controller_lock, flags);
-	desc->chip = chip;
-	spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-
-int set_irq_type(unsigned int irq, unsigned int type)
-{
-	struct irqdesc *desc;
-	unsigned long flags;
-	int ret = -ENXIO;
-
-	if (irq >= NR_IRQS) {
-		printk(KERN_ERR "Trying to set irq type for IRQ%d\n", irq);
-		return -ENODEV;
-	}
-
-	desc = irq_desc + irq;
-	if (desc->chip->type) {
-		spin_lock_irqsave(&irq_controller_lock, flags);
-		ret = desc->chip->type(irq, type);
-		spin_unlock_irqrestore(&irq_controller_lock, flags);
-	}
-
-	return ret;
-}
-
-void set_irq_flags(unsigned int irq, unsigned int iflags)
-{
-	struct irqdesc *desc;
-	unsigned long flags;
-
-	if (irq >= NR_IRQS) {
-		printk(KERN_ERR "Trying to set irq flags for IRQ%d\n", irq);
-		return;
-	}
-
-	desc = irq_desc + irq;
-	spin_lock_irqsave(&irq_controller_lock, flags);
-	desc->valid = (iflags & IRQF_VALID) != 0;
-	desc->probe_ok = (iflags & IRQF_PROBE) != 0;
-	desc->noautoenable = (iflags & IRQF_NOAUTOEN) != 0;
-	spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-
-int setup_irq(unsigned int irq, struct irqaction *new)
-{
-	int shared = 0;
-	struct irqaction *old, **p;
-	unsigned long flags;
-	struct irqdesc *desc;
-
-	/*
-	 * Some drivers like serial.c use request_irq() heavily,
-	 * so we have to be careful not to interfere with a
-	 * running system.
-	 */
-	if (new->flags & IRQF_SAMPLE_RANDOM) {
-		/*
-		 * This function might sleep, we want to call it first,
-		 * outside of the atomic block.
-		 * Yes, this might clear the entropy pool if the wrong
-		 * driver is attempted to be loaded, without actually
-		 * installing a new handler, but is this really a problem,
-		 * only the sysadmin is able to do this.
-		 */
-	        rand_initialize_irq(irq);
-	}
-
-	/*
-	 * The following block of code has to be executed atomically
-	 */
-	desc = irq_desc + irq;
-	spin_lock_irqsave(&irq_controller_lock, flags);
-	p = &desc->action;
-	if ((old = *p) != NULL) {
-		/* Can't share interrupts unless both agree to */
-		if (!(old->flags & new->flags & IRQF_SHARED)) {
-			spin_unlock_irqrestore(&irq_controller_lock, flags);
-			return -EBUSY;
-		}
-
-		/* add new interrupt at end of irq queue */
-		do {
-			p = &old->next;
-			old = *p;
-		} while (old);
-		shared = 1;
-	}
-
-	*p = new;
-
-	if (!shared) {
- 		desc->probing = 0;
-		desc->running = 0;
-		desc->pending = 0;
-		desc->depth = 1;
-		if (!desc->noautoenable) {
-			desc->depth = 0;
-			desc->enabled = 1;
-			desc->chip->unmask(irq);
-		}
-	}
-
-	spin_unlock_irqrestore(&irq_controller_lock, flags);
-	return 0;
-}
-
-/**
- *	request_irq - allocate an interrupt line
- *	@irq: Interrupt line to allocate
- *	@handler: Function to be called when the IRQ occurs
- *	@irqflags: Interrupt type flags
- *	@devname: An ascii name for the claiming device
- *	@dev_id: A cookie passed back to the handler function
- *
- *	This call allocates interrupt resources and enables the
- *	interrupt line and IRQ handling. From the point this
- *	call is made your handler function may be invoked. Since
- *	your handler function must clear any interrupt the board
- *	raises, you must take care both to initialise your hardware
- *	and to set up the interrupt handler in the right order.
- *
- *	Dev_id must be globally unique. Normally the address of the
- *	device data structure is used as the cookie. Since the handler
- *	receives this value it makes sense to use it.
- *
- *	If your interrupt is shared you must pass a non NULL dev_id
- *	as this is required when freeing the interrupt.
- *
- *	Flags:
- *
- *	IRQF_SHARED		Interrupt is shared
- *
- *	IRQF_DISABLED	Disable local interrupts while processing
- *
- *	IRQF_SAMPLE_RANDOM	The interrupt can be used for entropy
- *
- */
-
-//FIXME - handler used to return void - whats the significance of the change?
-int request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *),
-		 unsigned long irq_flags, const char * devname, void *dev_id)
-{
-	unsigned long retval;
-	struct irqaction *action;
-
-	if (irq >= NR_IRQS || !irq_desc[irq].valid || !handler ||
-	    (irq_flags & IRQF_SHARED && !dev_id))
-		return -EINVAL;
-
-	action = kmalloc(sizeof(struct irqaction), GFP_KERNEL);
-	if (!action)
-		return -ENOMEM;
-
-	action->handler = handler;
-	action->flags = irq_flags;
-	cpus_clear(action->mask);
-	action->name = devname;
-	action->next = NULL;
-	action->dev_id = dev_id;
-
-	retval = setup_irq(irq, action);
-
-	if (retval)
-		kfree(action);
-	return retval;
-}
-
-EXPORT_SYMBOL(request_irq);
-
-/**
- *	free_irq - free an interrupt
- *	@irq: Interrupt line to free
- *	@dev_id: Device identity to free
- *
- *	Remove an interrupt handler. The handler is removed and if the
- *	interrupt line is no longer in use by any driver it is disabled.
- *	On a shared IRQ the caller must ensure the interrupt is disabled
- *	on the card it drives before calling this function.
- *
- *	This function may be called from interrupt context.
- */
-void free_irq(unsigned int irq, void *dev_id)
-{
-	struct irqaction * action, **p;
-	unsigned long flags;
-
-	if (irq >= NR_IRQS || !irq_desc[irq].valid) {
-		printk(KERN_ERR "Trying to free IRQ%d\n",irq);
-#ifdef CONFIG_DEBUG_ERRORS
-		__backtrace();
-#endif
-		return;
-	}
-
-	spin_lock_irqsave(&irq_controller_lock, flags);
-	for (p = &irq_desc[irq].action; (action = *p) != NULL; p = &action->next) {
-		if (action->dev_id != dev_id)
-			continue;
-
-	    	/* Found it - now free it */
-		*p = action->next;
-		kfree(action);
-		goto out;
-	}
-	printk(KERN_ERR "Trying to free free IRQ%d\n",irq);
-#ifdef CONFIG_DEBUG_ERRORS
-	__backtrace();
-#endif
-out:
-	spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-
-EXPORT_SYMBOL(free_irq);
-
-/* Start the interrupt probing.  Unlike other architectures,
- * we don't return a mask of interrupts from probe_irq_on,
- * but return the number of interrupts enabled for the probe.
- * The interrupts which have been enabled for probing is
- * instead recorded in the irq_desc structure.
- */
-unsigned long probe_irq_on(void)
-{
-	unsigned int i, irqs = 0;
-	unsigned long delay;
-
-	/*
-	 * first snaffle up any unassigned but
-	 * probe-able interrupts
-	 */
-	spin_lock_irq(&irq_controller_lock);
-	for (i = 0; i < NR_IRQS; i++) {
-		if (!irq_desc[i].probe_ok || irq_desc[i].action)
-			continue;
-
-		irq_desc[i].probing = 1;
-		irq_desc[i].triggered = 0;
-		if (irq_desc[i].chip->type)
-			irq_desc[i].chip->type(i, IRQT_PROBE);
-		irq_desc[i].chip->unmask(i);
-		irqs += 1;
-	}
-	spin_unlock_irq(&irq_controller_lock);
-
-	/*
-	 * wait for spurious interrupts to mask themselves out again
-	 */
-	for (delay = jiffies + HZ/10; time_before(jiffies, delay); )
-		/* min 100ms delay */;
-
-	/*
-	 * now filter out any obviously spurious interrupts
-	 */
-	spin_lock_irq(&irq_controller_lock);
-	for (i = 0; i < NR_IRQS; i++) {
-		if (irq_desc[i].probing && irq_desc[i].triggered) {
-			irq_desc[i].probing = 0;
-			irqs -= 1;
-		}
-	}
-	spin_unlock_irq(&irq_controller_lock);
-
-	return irqs;
-}
-
-EXPORT_SYMBOL(probe_irq_on);
-
-/*
- * Possible return values:
- *  >= 0 - interrupt number
- *    -1 - no interrupt/many interrupts
- */
-int probe_irq_off(unsigned long irqs)
-{
-	unsigned int i;
-	int irq_found = NO_IRQ;
-
-	/*
-	 * look at the interrupts, and find exactly one
-	 * that we were probing has been triggered
-	 */
-	spin_lock_irq(&irq_controller_lock);
-	for (i = 0; i < NR_IRQS; i++) {
-		if (irq_desc[i].probing &&
-		    irq_desc[i].triggered) {
-			if (irq_found != NO_IRQ) {
-				irq_found = NO_IRQ;
-				goto out;
-			}
-			irq_found = i;
-		}
-	}
-
-	if (irq_found == -1)
-		irq_found = NO_IRQ;
-out:
-	spin_unlock_irq(&irq_controller_lock);
-
-	return irq_found;
-}
-
-EXPORT_SYMBOL(probe_irq_off);
-
-void __init init_irq_proc(void)
-{
-}
-
-void __init init_IRQ(void)
-{
-	struct irqdesc *desc;
-	extern void init_dma(void);
-	int irq;
-
-	for (irq = 0, desc = irq_desc; irq < NR_IRQS; irq++, desc++)
-		*desc = bad_irq_desc;
-
-	arc_init_irq();
-	init_dma();
-}