summaryrefslogtreecommitdiffstats
path: root/arch/arm26/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/arm26/Kconfig
downloadop-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'arch/arm26/Kconfig')
-rw-r--r--arch/arm26/Kconfig227
1 files changed, 227 insertions, 0 deletions
diff --git a/arch/arm26/Kconfig b/arch/arm26/Kconfig
new file mode 100644
index 0000000..3955de5
--- /dev/null
+++ b/arch/arm26/Kconfig
@@ -0,0 +1,227 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "Linux Kernel Configuration"
+
+config ARM
+ bool
+ default y
+
+config ARM26
+ bool
+ default y
+
+config MMU
+ bool
+ default y
+
+config ARCH_ACORN
+ bool
+ default y
+
+config CPU_26
+ bool
+ default y
+
+config FIQ
+ bool
+ default y
+
+# 9 = 512 pages 8 = 256 pages 7 = 128 pages
+config FORCE_MAX_ZONEORDER
+ int
+ default 9
+
+config UID16
+ bool
+ default y
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config GENERIC_BUST_SPINLOCK
+ bool
+
+config GENERIC_ISA_DMA
+ bool
+
+source "init/Kconfig"
+
+
+menu "System Type"
+
+comment "Archimedes/A5000 Implementations (select only ONE)"
+
+config ARCH_ARC
+ bool "Archimedes"
+ help
+ Say Y to support the Acorn Archimedes.
+
+ The Acorn Archimedes was an personal computer based on an 8MHz ARM2
+ processor, released in 1987. It supported up to 16MB of RAM in
+ later models and floppy, harddisc, ethernet etc.
+
+config ARCH_A5K
+ bool "A5000"
+ help
+ Say Y here to to support the Acorn A5000.
+
+ Linux can support the
+ internal IDE disk and CD-ROM interface, serial and parallel port,
+ and the floppy drive. Note that on some A5000s the floppy is
+ plugged into the wrong socket on the motherboard.
+
+config PAGESIZE_16
+ bool "2MB physical memory (broken)"
+ help
+ Say Y here if your Archimedes or A5000 system has only 2MB of
+ memory, otherwise say N. The resulting kernel will not run on a
+ machine with 4MB of memory.
+endmenu
+
+menu "General setup"
+
+# Compressed boot loader in ROM. Yes, we really want to ask about
+# TEXT and BSS so we preserve their values in the config files.
+config ZBOOT_ROM
+ bool "Compressed boot loader in ROM/flash"
+ help
+ Say Y here if you intend to execute your compressed kernel image (zImage)
+ directly from ROM or flash. If unsure, say N.
+
+config ZBOOT_ROM_TEXT
+ depends on ZBOOT_ROM
+ hex "Compressed ROM boot loader base address"
+ default "0"
+ help
+ The base address for zImage. Unless you have special requirements, you
+ should not change this value.
+
+config ZBOOT_ROM_BSS
+ depends on ZBOOT_ROM
+ hex "Compressed ROM boot loader BSS address"
+ default "0"
+ help
+ The base address of 64KiB of read/write memory, which must be available
+ while the decompressor is running. Unless you have special requirements,
+ you should not change this value.
+
+config XIP_KERNEL
+ bool "Execute In Place (XIP) kernel image"
+ help
+ Select this option to create a kernel that can be programed into
+ the OS ROMs.
+
+comment "At least one math emulation must be selected"
+
+config FPE_NWFPE
+ tristate "NWFPE math emulation"
+ ---help---
+ Say Y to include the NWFPE floating point emulator in the kernel.
+ This is necessary to run most binaries. Linux does not currently
+ support floating point hardware so you need to say Y here even if
+ your machine has an FPA or floating point co-processor podule.
+
+ It is also possible to say M to build the emulator as a module
+ (nwfpe) or indeed to leave it out altogether. However, unless you
+ know what you are doing this can easily render your machine
+ unbootable. Saying Y is the safe option.
+
+ You may say N here if you are going to load the Acorn FPEmulator
+ early in the bootup.
+
+source "fs/Kconfig.binfmt"
+
+config PREEMPT
+ bool "Preemptible Kernel (EXPERIMENTAL)"
+ depends on CPU_32 && EXPERIMENTAL
+ help
+ This option reduces the latency of the kernel when reacting to
+ real-time or interactive events by allowing a low priority process to
+ be preempted even if it is in kernel mode executing a system call.
+ This allows applications to run more reliably even when the system is
+ under load.
+
+ Say Y here if you are building a kernel for a desktop, embedded
+ or real-time system. Say N if you are unsure.
+
+config ARTHUR
+ tristate "RISC OS personality"
+ depends on CPU_32
+ help
+ Say Y here to include the kernel code necessary if you want to run
+ Acorn RISC OS/Arthur binaries under Linux. This code is still very
+ experimental; if this sounds frightening, say N and sleep in peace.
+ You can also say M here to compile this support as a module (which
+ will be called arthur).
+
+config CMDLINE
+ string "Default kernel command string"
+ default ""
+ help
+ On some architectures (EBSA110 and CATS), there is currently no way
+ for the boot loader to pass arguments to the kernel. For these
+ architectures, you should supply some command-line options at build
+ time by entering them here. As a minimum, you should specify the
+ memory size and the root device (e.g., mem=64M root=/dev/nfs).
+
+endmenu
+
+source "drivers/base/Kconfig"
+
+source "drivers/parport/Kconfig"
+
+source "drivers/pnp/Kconfig"
+
+source "drivers/block/Kconfig"
+
+source "drivers/md/Kconfig"
+
+source "net/Kconfig"
+
+source "drivers/ide/Kconfig"
+
+source "drivers/scsi/Kconfig"
+
+source "drivers/isdn/Kconfig"
+
+#
+# input before char - char/joystick depends on it. As does USB.
+#
+source "drivers/input/Kconfig"
+
+source "drivers/char/Kconfig"
+
+source "drivers/media/Kconfig"
+
+source "fs/Kconfig"
+
+source "drivers/video/Kconfig"
+
+if ARCH_ACORN
+
+source "sound/Kconfig"
+
+endif
+
+source "drivers/misc/Kconfig"
+
+source "drivers/usb/Kconfig"
+
+source "arch/arm26/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
OpenPOWER on IntegriCloud