ARM: spear: move all files to mach-spear

There are no conflicting files between the three mach-spear* directories
and plat-spear any more, so we can now move all file to a common
mach-spear directory.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

1 files changed, 0 insertions, 245 deletions

diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
deleted file mode 100644
index bd5c53c..0000000
--- a/arch/arm/plat-spear/time.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * arch/arm/plat-spear/time.c
- *
- * Copyright (C) 2010 ST Microelectronics
- * Shiraz Hashim<shiraz.hashim@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/clocksource.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/of_irq.h>
-#include <linux/of_address.h>
-#include <linux/time.h>
-#include <linux/irq.h>
-#include <asm/mach/time.h>
-#include <mach/generic.h>
-
-/*
- * We would use TIMER0 and TIMER1 as clockevent and clocksource.
- * Timer0 and Timer1 both belong to same gpt block in cpu subbsystem. Further
- * they share same functional clock. Any change in one's functional clock will
- * also affect other timer.
- */
-
-#define CLKEVT	0	/* gpt0, channel0 as clockevent */
-#define CLKSRC	1	/* gpt0, channel1 as clocksource */
-
-/* Register offsets, x is channel number */
-#define CR(x)		((x) * 0x80 + 0x80)
-#define IR(x)		((x) * 0x80 + 0x84)
-#define LOAD(x)		((x) * 0x80 + 0x88)
-#define COUNT(x)	((x) * 0x80 + 0x8C)
-
-/* Reg bit definitions */
-#define CTRL_INT_ENABLE		0x0100
-#define CTRL_ENABLE		0x0020
-#define CTRL_ONE_SHOT		0x0010
-
-#define CTRL_PRESCALER1		0x0
-#define CTRL_PRESCALER2		0x1
-#define CTRL_PRESCALER4		0x2
-#define CTRL_PRESCALER8		0x3
-#define CTRL_PRESCALER16	0x4
-#define CTRL_PRESCALER32	0x5
-#define CTRL_PRESCALER64	0x6
-#define CTRL_PRESCALER128	0x7
-#define CTRL_PRESCALER256	0x8
-
-#define INT_STATUS		0x1
-
-/*
- * Minimum clocksource/clockevent timer range in seconds
- */
-#define SPEAR_MIN_RANGE 4
-
-static __iomem void *gpt_base;
-static struct clk *gpt_clk;
-
-static void clockevent_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *clk_event_dev);
-static int clockevent_next_event(unsigned long evt,
-				 struct clock_event_device *clk_event_dev);
-
-static void spear_clocksource_init(void)
-{
-	u32 tick_rate;
-	u16 val;
-
-	/* program the prescaler (/256)*/
-	writew(CTRL_PRESCALER256, gpt_base + CR(CLKSRC));
-
-	/* find out actual clock driving Timer */
-	tick_rate = clk_get_rate(gpt_clk);
-	tick_rate >>= CTRL_PRESCALER256;
-
-	writew(0xFFFF, gpt_base + LOAD(CLKSRC));
-
-	val = readw(gpt_base + CR(CLKSRC));
-	val &= ~CTRL_ONE_SHOT;	/* autoreload mode */
-	val |= CTRL_ENABLE ;
-	writew(val, gpt_base + CR(CLKSRC));
-
-	/* register the clocksource */
-	clocksource_mmio_init(gpt_base + COUNT(CLKSRC), "tmr1", tick_rate,
-		200, 16, clocksource_mmio_readw_up);
-}
-
-static struct clock_event_device clkevt = {
-	.name = "tmr0",
-	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode = clockevent_set_mode,
-	.set_next_event = clockevent_next_event,
-	.shift = 0,	/* to be computed */
-};
-
-static void clockevent_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *clk_event_dev)
-{
-	u32 period;
-	u16 val;
-
-	/* stop the timer */
-	val = readw(gpt_base + CR(CLKEVT));
-	val &= ~CTRL_ENABLE;
-	writew(val, gpt_base + CR(CLKEVT));
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		period = clk_get_rate(gpt_clk) / HZ;
-		period >>= CTRL_PRESCALER16;
-		writew(period, gpt_base + LOAD(CLKEVT));
-
-		val = readw(gpt_base + CR(CLKEVT));
-		val &= ~CTRL_ONE_SHOT;
-		val |= CTRL_ENABLE | CTRL_INT_ENABLE;
-		writew(val, gpt_base + CR(CLKEVT));
-
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		val = readw(gpt_base + CR(CLKEVT));
-		val |= CTRL_ONE_SHOT;
-		writew(val, gpt_base + CR(CLKEVT));
-
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-
-		break;
-	default:
-		pr_err("Invalid mode requested\n");
-		break;
-	}
-}
-
-static int clockevent_next_event(unsigned long cycles,
-				 struct clock_event_device *clk_event_dev)
-{
-	u16 val = readw(gpt_base + CR(CLKEVT));
-
-	if (val & CTRL_ENABLE)
-		writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT));
-
-	writew(cycles, gpt_base + LOAD(CLKEVT));
-
-	val |= CTRL_ENABLE | CTRL_INT_ENABLE;
-	writew(val, gpt_base + CR(CLKEVT));
-
-	return 0;
-}
-
-static irqreturn_t spear_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &clkevt;
-
-	writew(INT_STATUS, gpt_base + IR(CLKEVT));
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction spear_timer_irq = {
-	.name = "timer",
-	.flags = IRQF_DISABLED | IRQF_TIMER,
-	.handler = spear_timer_interrupt
-};
-
-static void __init spear_clockevent_init(int irq)
-{
-	u32 tick_rate;
-
-	/* program the prescaler */
-	writew(CTRL_PRESCALER16, gpt_base + CR(CLKEVT));
-
-	tick_rate = clk_get_rate(gpt_clk);
-	tick_rate >>= CTRL_PRESCALER16;
-
-	clkevt.cpumask = cpumask_of(0);
-
-	clockevents_config_and_register(&clkevt, tick_rate, 3, 0xfff0);
-
-	setup_irq(irq, &spear_timer_irq);
-}
-
-const static struct of_device_id timer_of_match[] __initconst = {
-	{ .compatible = "st,spear-timer", },
-	{ },
-};
-
-void __init spear_setup_of_timer(void)
-{
-	struct device_node *np;
-	int irq, ret;
-
-	np = of_find_matching_node(NULL, timer_of_match);
-	if (!np) {
-		pr_err("%s: No timer passed via DT\n", __func__);
-		return;
-	}
-
-	irq = irq_of_parse_and_map(np, 0);
-	if (!irq) {
-		pr_err("%s: No irq passed for timer via DT\n", __func__);
-		return;
-	}
-
-	gpt_base = of_iomap(np, 0);
-	if (!gpt_base) {
-		pr_err("%s: of iomap failed\n", __func__);
-		return;
-	}
-
-	gpt_clk = clk_get_sys("gpt0", NULL);
-	if (!gpt_clk) {
-		pr_err("%s:couldn't get clk for gpt\n", __func__);
-		goto err_iomap;
-	}
-
-	ret = clk_prepare_enable(gpt_clk);
-	if (ret < 0) {
-		pr_err("%s:couldn't prepare-enable gpt clock\n", __func__);
-		goto err_prepare_enable_clk;
-	}
-
-	spear_clockevent_init(irq);
-	spear_clocksource_init();
-
-	return;
-
-err_prepare_enable_clk:
-	clk_put(gpt_clk);
-err_iomap:
-	iounmap(gpt_base);
-}