diff options
author | David S. Miller <davem@davemloft.net> | 2010-08-16 14:09:34 -0700 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2010-08-16 14:09:34 -0700 |
commit | 300a103d1504134f8c4a7e831f995e917ea9b1e4 (patch) | |
tree | 7f94d5fff513d132bd0b57a9e3bd96c4cc80d707 /arch/arm/plat-omap/include | |
parent | 0a492896ac07336c98f37ad7fab4a6387b6ada78 (diff) | |
parent | da5cabf80e2433131bf0ed8993abc0f7ea618c73 (diff) | |
download | op-kernel-dev-300a103d1504134f8c4a7e831f995e917ea9b1e4.zip op-kernel-dev-300a103d1504134f8c4a7e831f995e917ea9b1e4.tar.gz |
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Diffstat (limited to 'arch/arm/plat-omap/include')
20 files changed, 389 insertions, 354 deletions
diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h index 5cd6220..3cf4fa2 100644 --- a/arch/arm/plat-omap/include/plat/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -85,6 +85,14 @@ struct omap_usb_config { * 6 == 6 wire unidirectional (or TLL) */ u8 pins[3]; + + struct platform_device *udc_device; + struct platform_device *ohci_device; + struct platform_device *otg_device; + + u32 (*usb0_init)(unsigned nwires, unsigned is_device); + u32 (*usb1_init)(unsigned nwires); + u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup); }; struct omap_lcd_config { diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index dfc472c..fef4696 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -19,6 +19,22 @@ struct module; struct clk; struct clockdomain; +/** + * struct clkops - some clock function pointers + * @enable: fn ptr that enables the current clock in hardware + * @disable: fn ptr that enables the current clock in hardware + * @find_idlest: function returning the IDLEST register for the clock's IP blk + * @find_companion: function returning the "companion" clk reg for the clock + * + * A "companion" clk is an accompanying clock to the one being queried + * that must be enabled for the IP module connected to the clock to + * become accessible by the hardware. Neither @find_idlest nor + * @find_companion should be needed; that information is IP + * block-specific; the hwmod code has been created to handle this, but + * until hwmod data is ready and drivers have been converted to use PM + * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and + * @find_companion must, unfortunately, remain. + */ struct clkops { int (*enable)(struct clk *); void (*disable)(struct clk *); @@ -30,12 +46,45 @@ struct clkops { #ifdef CONFIG_ARCH_OMAP2PLUS +/* struct clksel_rate.flags possibilities */ +#define RATE_IN_242X (1 << 0) +#define RATE_IN_243X (1 << 1) +#define RATE_IN_3XXX (1 << 2) /* rates common to all OMAP3 */ +#define RATE_IN_3430ES2 (1 << 3) /* 3430ES2 rates only */ +#define RATE_IN_36XX (1 << 4) +#define RATE_IN_4430 (1 << 5) + +#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) +#define RATE_IN_3430ES2PLUS (RATE_IN_3430ES2 | RATE_IN_36XX) + +/** + * struct clksel_rate - register bitfield values corresponding to clk divisors + * @val: register bitfield value (shifted to bit 0) + * @div: clock divisor corresponding to @val + * @flags: (see "struct clksel_rate.flags possibilities" above) + * + * @val should match the value of a read from struct clk.clksel_reg + * AND'ed with struct clk.clksel_mask, shifted right to bit 0. + * + * @div is the divisor that should be applied to the parent clock's rate + * to produce the current clock's rate. + * + * XXX @flags probably should be replaced with an struct omap_chip. + */ struct clksel_rate { u32 val; u8 div; u8 flags; }; +/** + * struct clksel - available parent clocks, and a pointer to their divisors + * @parent: struct clk * to a possible parent clock + * @rates: available divisors for this parent clock + * + * A struct clksel is always associated with one or more struct clks + * and one or more struct clksel_rates. + */ struct clksel { struct clk *parent; const struct clksel_rate *rates; @@ -116,6 +165,60 @@ struct dpll_data { #endif +/* struct clk.flags possibilities */ +#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ +#define CLOCK_IDLE_CONTROL (1 << 1) +#define CLOCK_NO_IDLE_PARENT (1 << 2) +#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ +#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ + +/** + * struct clk - OMAP struct clk + * @node: list_head connecting this clock into the full clock list + * @ops: struct clkops * for this clock + * @name: the name of the clock in the hardware (used in hwmod data and debug) + * @parent: pointer to this clock's parent struct clk + * @children: list_head connecting to the child clks' @sibling list_heads + * @sibling: list_head connecting this clk to its parent clk's @children + * @rate: current clock rate + * @enable_reg: register to write to enable the clock (see @enable_bit) + * @recalc: fn ptr that returns the clock's current rate + * @set_rate: fn ptr that can change the clock's current rate + * @round_rate: fn ptr that can round the clock's current rate + * @init: fn ptr to do clock-specific initialization + * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) + * @usecount: number of users that have requested this clock to be enabled + * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div + * @flags: see "struct clk.flags possibilities" above + * @clksel_reg: for clksel clks, register va containing src/divisor select + * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector + * @clksel: for clksel clks, pointer to struct clksel for this clock + * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock + * @clkdm_name: clockdomain name that this clock is contained in + * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime + * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) + * @src_offset: bitshift for source selection bitfield (OMAP1 only) + * + * XXX @rate_offset, @src_offset should probably be removed and OMAP1 + * clock code converted to use clksel. + * + * XXX @usecount is poorly named. It should be "enable_count" or + * something similar. "users" in the description refers to kernel + * code (core code or drivers) that have called clk_enable() and not + * yet called clk_disable(); the usecount of parent clocks is also + * incremented by the clock code when clk_enable() is called on child + * clocks and decremented by the clock code when clk_disable() is + * called on child clocks. + * + * XXX @clkdm, @usecount, @children, @sibling should be marked for + * internal use only. + * + * @children and @sibling are used to optimize parent-to-child clock + * tree traversals. (child-to-parent traversals use @parent.) + * + * XXX The notion of the clock's current rate probably needs to be + * separated from the clock's target rate. + */ struct clk { struct list_head node; const struct clkops *ops; @@ -129,8 +232,8 @@ struct clk { int (*set_rate)(struct clk *, unsigned long); long (*round_rate)(struct clk *, unsigned long); void (*init)(struct clk *); - __u8 enable_bit; - __s8 usecount; + u8 enable_bit; + s8 usecount; u8 fixed_div; u8 flags; #ifdef CONFIG_ARCH_OMAP2PLUS @@ -141,8 +244,8 @@ struct clk { const char *clkdm_name; struct clockdomain *clkdm; #else - __u8 rate_offset; - __u8 src_offset; + u8 rate_offset; + u8 src_offset; #endif #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) struct dentry *dent; /* For visible tree hierarchy */ @@ -188,23 +291,4 @@ extern const struct clkops clkops_null; extern struct clk dummy_ck; -/* Clock flags */ -#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ -#define CLOCK_IDLE_CONTROL (1 << 1) -#define CLOCK_NO_IDLE_PARENT (1 << 2) -#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ -#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ - -/* Clksel_rate flags */ -#define RATE_IN_242X (1 << 0) -#define RATE_IN_243X (1 << 1) -#define RATE_IN_3XXX (1 << 2) /* rates common to all OMAP3 */ -#define RATE_IN_3430ES2 (1 << 3) /* 3430ES2 rates only */ -#define RATE_IN_36XX (1 << 4) -#define RATE_IN_4430 (1 << 5) - -#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) - -#define RATE_IN_3430ES2PLUS (RATE_IN_3430ES2 | RATE_IN_36XX) - #endif diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 5e4afbe..9776b41 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -58,8 +58,7 @@ struct omap_globals { void omap2_set_globals_242x(void); void omap2_set_globals_243x(void); -void omap2_set_globals_343x(void); -void omap2_set_globals_36xx(void); +void omap2_set_globals_3xxx(void); void omap2_set_globals_443x(void); /* These get called from omap2_set_globals_xxxx(), do not call these */ @@ -69,6 +68,8 @@ void omap2_set_globals_control(struct omap_globals *); void omap2_set_globals_prcm(struct omap_globals *); void omap2_set_globals_uart(struct omap_globals *); +void omap3_map_io(void); + /** * omap_test_timeout - busy-loop, testing a condition * @cond: condition to test until it evaluates to true @@ -89,4 +90,8 @@ void omap2_set_globals_uart(struct omap_globals *); } \ }) +extern struct device *omap2_get_mpuss_device(void); +extern struct device *omap2_get_dsp_device(void); +extern struct device *omap2_get_l3_device(void); + #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 7514174..2e2ae53 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -66,6 +66,8 @@ unsigned int omap_rev(void); * family. This difference can be handled separately. */ #define OMAP_REVBITS_00 0x00 +#define OMAP_REVBITS_01 0x01 +#define OMAP_REVBITS_02 0x02 #define OMAP_REVBITS_10 0x10 #define OMAP_REVBITS_20 0x20 #define OMAP_REVBITS_30 0x30 @@ -376,6 +378,8 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP3430_REV_ES3_1_2 0x34305034 #define OMAP3630_REV_ES1_0 0x36300034 +#define OMAP3630_REV_ES1_1 0x36300134 +#define OMAP3630_REV_ES1_2 0x36300234 #define OMAP35XX_CLASS 0x35000034 #define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 8)) @@ -411,6 +415,8 @@ IS_OMAP_TYPE(3517, 0x3517) #define CHIP_IS_OMAP3430ES3_1 (1 << 6) #define CHIP_IS_OMAP3630ES1 (1 << 7) #define CHIP_IS_OMAP4430ES1 (1 << 8) +#define CHIP_IS_OMAP3630ES1_1 (1 << 9) +#define CHIP_IS_OMAP3630ES1_2 (1 << 10) #define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430) @@ -424,11 +430,12 @@ IS_OMAP_TYPE(3517, 0x3517) */ #define CHIP_GE_OMAP3430ES2 (CHIP_IS_OMAP3430ES2 | \ CHIP_IS_OMAP3430ES3_0 | \ - CHIP_IS_OMAP3430ES3_1 | \ - CHIP_IS_OMAP3630ES1) + CHIP_GE_OMAP3430ES3_1) #define CHIP_GE_OMAP3430ES3_1 (CHIP_IS_OMAP3430ES3_1 | \ - CHIP_IS_OMAP3630ES1) - + CHIP_IS_OMAP3630ES1 | \ + CHIP_GE_OMAP3630ES1_1) +#define CHIP_GE_OMAP3630ES1_1 (CHIP_IS_OMAP3630ES1_1 | \ + CHIP_IS_OMAP3630ES1_2) int omap_chip_is(struct omap_chip_id oci); void omap2_check_revision(void); @@ -444,6 +451,7 @@ extern u32 omap3_features; #define OMAP3_HAS_NEON BIT(3) #define OMAP3_HAS_ISP BIT(4) #define OMAP3_HAS_192MHZ_CLK BIT(5) +#define OMAP3_HAS_IO_WAKEUP BIT(6) #define OMAP3_HAS_FEATURE(feat,flag) \ static inline unsigned int omap3_has_ ##feat(void) \ @@ -457,5 +465,6 @@ OMAP3_HAS_FEATURE(iva, IVA) OMAP3_HAS_FEATURE(neon, NEON) OMAP3_HAS_FEATURE(isp, ISP) OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK) +OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP) #endif diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h index 1c529ce..8bd15bd 100644 --- a/arch/arm/plat-omap/include/plat/display.h +++ b/arch/arm/plat-omap/include/plat/display.h @@ -238,7 +238,7 @@ int dsi_vc_dcs_write_1(int channel, u8 dcs_cmd, u8 param); int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len); int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen); int dsi_vc_dcs_read_1(int channel, u8 dcs_cmd, u8 *data); -int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u16 *data); +int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u8 *data1, u8 *data2); int dsi_vc_set_max_rx_packet_size(int channel, u16 len); int dsi_vc_send_null(int channel); int dsi_vc_send_bta_sync(int channel); @@ -277,8 +277,8 @@ struct omap_video_timings { * identify the mode, and does not actually use the configs * itself. However, the configs should be something that * a normal monitor can also show */ -const extern struct omap_video_timings omap_dss_pal_timings; -const extern struct omap_video_timings omap_dss_ntsc_timings; +extern const struct omap_video_timings omap_dss_pal_timings; +extern const struct omap_video_timings omap_dss_ntsc_timings; #endif struct omap_overlay_info { @@ -560,7 +560,8 @@ void omapdss_dsi_vc_enable_hs(int channel, bool enable); int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable); int omap_dsi_prepare_update(struct omap_dss_device *dssdev, - u16 *x, u16 *y, u16 *w, u16 *h); + u16 *x, u16 *y, u16 *w, u16 *h, + bool enlarge_update_area); int omap_dsi_update(struct omap_dss_device *dssdev, int channel, u16 x, u16 y, u16 w, u16 h, diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index 02232ca..af3a039 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -345,6 +345,7 @@ #define OMAP_DMA_SYNC_BLOCK 0x02 #define OMAP_DMA_SYNC_PACKET 0x03 +#define OMAP_DMA_DST_SYNC_PREFETCH 0x02 #define OMAP_DMA_SRC_SYNC 0x01 #define OMAP_DMA_DST_SYNC 0x00 diff --git a/arch/arm/plat-omap/include/plat/dsp_common.h b/arch/arm/plat-omap/include/plat/dsp_common.h deleted file mode 100644 index da97736..0000000 --- a/arch/arm/plat-omap/include/plat/dsp_common.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * This file is part of OMAP DSP driver (DSP Gateway version 3.3.1) - * - * Copyright (C) 2004-2006 Nokia Corporation. All rights reserved. - * - * Contact: Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef ASM_ARCH_DSP_COMMON_H -#define ASM_ARCH_DSP_COMMON_H - -#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_OMAP_MMU_FWK) -extern void omap_dsp_request_mpui(void); -extern void omap_dsp_release_mpui(void); -extern int omap_dsp_request_mem(void); -extern int omap_dsp_release_mem(void); -#else -static inline int omap_dsp_request_mem(void) -{ - return 0; -} -#define omap_dsp_release_mem() do {} while (0) -#endif - -#endif /* ASM_ARCH_DSP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 145838a..9fd99b9 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -25,10 +25,26 @@ #define GPMC_CS_NAND_ADDRESS 0x20 #define GPMC_CS_NAND_DATA 0x24 -#define GPMC_CONFIG 0x50 -#define GPMC_STATUS 0x54 -#define GPMC_CS0_BASE 0x60 -#define GPMC_CS_SIZE 0x30 +/* Control Commands */ +#define GPMC_CONFIG_RDY_BSY 0x00000001 +#define GPMC_CONFIG_DEV_SIZE 0x00000002 +#define GPMC_CONFIG_DEV_TYPE 0x00000003 +#define GPMC_SET_IRQ_STATUS 0x00000004 +#define GPMC_CONFIG_WP 0x00000005 + +#define GPMC_GET_IRQ_STATUS 0x00000006 +#define GPMC_PREFETCH_FIFO_CNT 0x00000007 /* bytes available in FIFO for r/w */ +#define GPMC_PREFETCH_COUNT 0x00000008 /* remaining bytes to be read/write*/ +#define GPMC_STATUS_BUFFER 0x00000009 /* 1: buffer is available to write */ + +#define GPMC_NAND_COMMAND 0x0000000a +#define GPMC_NAND_ADDRESS 0x0000000b +#define GPMC_NAND_DATA 0x0000000c + +/* ECC commands */ +#define GPMC_ECC_READ 0 /* Reset Hardware ECC for read */ +#define GPMC_ECC_WRITE 1 /* Reset Hardware ECC for write */ +#define GPMC_ECC_READSYN 2 /* Reset before syndrom is read back */ #define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31) #define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30) @@ -47,7 +63,6 @@ #define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) #define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) #define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) -#define GPMC_CONFIG1_DEVICETYPE_NAND GPMC_CONFIG1_DEVICETYPE(2) #define GPMC_CONFIG1_MUXADDDATA (1 << 9) #define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4) #define GPMC_CONFIG1_FCLK_DIV(val) (val & 3) @@ -56,6 +71,14 @@ #define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3)) #define GPMC_CONFIG7_CSVALID (1 << 6) +#define GPMC_DEVICETYPE_NOR 0 +#define GPMC_DEVICETYPE_NAND 2 +#define GPMC_CONFIG_WRITEPROTECT 0x00000010 +#define GPMC_STATUS_BUFF_EMPTY 0x00000001 +#define WR_RD_PIN_MONITORING 0x00600000 +#define GPMC_PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F) +#define GPMC_PREFETCH_STATUS_COUNT(val) (val & 0x00003fff) + /* * Note that all values in this struct are in nanoseconds, while * the register values are in gpmc_fck cycles. @@ -108,10 +131,15 @@ extern int gpmc_cs_set_reserved(int cs, int reserved); extern int gpmc_cs_reserved(int cs); extern int gpmc_prefetch_enable(int cs, int dma_mode, unsigned int u32_count, int is_write); -extern void gpmc_prefetch_reset(void); -extern int gpmc_prefetch_status(void); +extern int gpmc_prefetch_reset(int cs); extern void omap3_gpmc_save_context(void); extern void omap3_gpmc_restore_context(void); extern void gpmc_init(void); +extern int gpmc_read_status(int cmd); +extern int gpmc_cs_configure(int cs, int cmd, int wval); +extern int gpmc_nand_read(int cs, int cmd); +extern int gpmc_nand_write(int cs, int cmd, int wval); +int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size); +int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code); #endif diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h index 0752af9..33c7d41 100644 --- a/arch/arm/plat-omap/include/plat/iommu.h +++ b/arch/arm/plat-omap/include/plat/iommu.h @@ -80,6 +80,7 @@ struct iommu_functions { int (*enable)(struct iommu *obj); void (*disable)(struct iommu *obj); + void (*set_twl)(struct iommu *obj, bool on); u32 (*fault_isr)(struct iommu *obj, u32 *ra); void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr); @@ -143,6 +144,7 @@ extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e); extern u32 iotlb_cr_to_virt(struct cr_regs *cr); extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e); +extern void iommu_set_twl(struct iommu *obj, bool on); extern void flush_iotlb_page(struct iommu *obj, u32 da); extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end); extern void flush_iotlb_all(struct iommu *obj); diff --git a/arch/arm/plat-omap/include/plat/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h index 729166b..9976565 100644 --- a/arch/arm/plat-omap/include/plat/mailbox.h +++ b/arch/arm/plat-omap/include/plat/mailbox.h @@ -3,10 +3,11 @@ #ifndef MAILBOX_H #define MAILBOX_H -#include <linux/wait.h> +#include <linux/spinlock.h> #include <linux/workqueue.h> -#include <linux/blkdev.h> #include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/kfifo.h> typedef u32 mbox_msg_t; struct omap_mbox; @@ -42,7 +43,7 @@ struct omap_mbox_ops { struct omap_mbox_queue { spinlock_t lock; - struct request_queue *queue; + struct kfifo fifo; struct work_struct work; struct tasklet_struct tasklet; int (*callback)(void *); @@ -52,19 +53,10 @@ struct omap_mbox_queue { struct omap_mbox { char *name; unsigned int irq; - struct omap_mbox_queue *txq, *rxq; - struct omap_mbox_ops *ops; - - mbox_msg_t seq_snd, seq_rcv; - struct device *dev; - - struct omap_mbox *next; void *priv; - - void (*err_notify)(void); }; int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg); @@ -73,8 +65,8 @@ void omap_mbox_init_seq(struct omap_mbox *); struct omap_mbox *omap_mbox_get(const char *); void omap_mbox_put(struct omap_mbox *); -int omap_mbox_register(struct device *parent, struct omap_mbox *); -int omap_mbox_unregister(struct omap_mbox *); +int omap_mbox_register(struct device *parent, struct omap_mbox **); +int omap_mbox_unregister(void); static inline void omap_mbox_save_ctx(struct omap_mbox *mbox) { diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index c835f1e..9b89ec6 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -122,6 +122,8 @@ struct omap_mmc_platform_data { /* Call back after enabling / disabling regulators */ void (*after_set_reg)(struct device *dev, int slot, int power_on, int vdd); + /* if we have special card, init it using this callback */ + void (*init_card)(struct mmc_card *card); /* return MMC cover switch state, can be NULL if not supported. * diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h index c7472a2..aeba717 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -114,28 +114,11 @@ PU_PD_REG(NA, 0) \ }, -#define MUX_CFG_24XX(desc, reg_offset, mode, \ - pull_en, pull_mode, dbg) \ -{ \ - .name = desc, \ - .debug = dbg, \ - .mux_reg = reg_offset, \ - .mask = mode, \ - .pull_val = pull_en, \ - .pu_pd_val = pull_mode, \ -}, - -/* 24xx/34xx mux bit defines */ -#define OMAP2_PULL_ENA (1 << 3) -#define OMAP2_PULL_UP (1 << 4) -#define OMAP2_ALTELECTRICALSEL (1 << 5) - struct pin_config { char *name; const unsigned int mux_reg; unsigned char debug; -#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2) const unsigned char mask_offset; const unsigned char mask; @@ -147,7 +130,6 @@ struct pin_config { const char *pu_pd_name; const unsigned int pu_pd_reg; const unsigned char pu_pd_val; -#endif #if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) const char *mux_reg_name; @@ -191,6 +173,10 @@ enum omap7xx_index { SPI_7XX_4, SPI_7XX_5, SPI_7XX_6, + + /* UART */ + UART_7XX_1, + UART_7XX_2, }; enum omap1xxx_index { @@ -446,208 +432,6 @@ enum omap1xxx_index { }; -enum omap24xx_index { - /* 24xx I2C */ - M19_24XX_I2C1_SCL, - L15_24XX_I2C1_SDA, - J15_24XX_I2C2_SCL, - H19_24XX_I2C2_SDA, - - /* 24xx Menelaus interrupt */ - W19_24XX_SYS_NIRQ, - - /* 24xx clock */ - W14_24XX_SYS_CLKOUT, - - /* 24xx GPMC chipselects, wait pin monitoring */ - E2_GPMC_NCS2, - L2_GPMC_NCS7, - L3_GPMC_WAIT0, - N7_GPMC_WAIT1, - M1_GPMC_WAIT2, - P1_GPMC_WAIT3, - - /* 242X McBSP */ - Y15_24XX_MCBSP2_CLKX, - R14_24XX_MCBSP2_FSX, - W15_24XX_MCBSP2_DR, - V15_24XX_MCBSP2_DX, - - /* 24xx GPIO */ - M21_242X_GPIO11, - P21_242X_GPIO12, - AA10_242X_GPIO13, - AA6_242X_GPIO14, - AA4_242X_GPIO15, - Y11_242X_GPIO16, - AA12_242X_GPIO17, - AA8_242X_GPIO58, - Y20_24XX_GPIO60, - W4__24XX_GPIO74, - N15_24XX_GPIO85, - M15_24XX_GPIO92, - P20_24XX_GPIO93, - P18_24XX_GPIO95, - M18_24XX_GPIO96, - L14_24XX_GPIO97, - J15_24XX_GPIO99, - V14_24XX_GPIO117, - P14_24XX_GPIO125, - - /* 242x DBG GPIO */ - V4_242X_GPIO49, - W2_242X_GPIO50, - U4_242X_GPIO51, - V3_242X_GPIO52, - V2_242X_GPIO53, - V6_242X_GPIO53, - T4_242X_GPIO54, - Y4_242X_GPIO54, - T3_242X_GPIO55, - U2_242X_GPIO56, - - /* 24xx external DMA requests */ - AA10_242X_DMAREQ0, - AA6_242X_DMAREQ1, - E4_242X_DMAREQ2, - G4_242X_DMAREQ3, - D3_242X_DMAREQ4, - E3_242X_DMAREQ5, - - /* UART3 */ - K15_24XX_UART3_TX, - K14_24XX_UART3_RX, - - /* MMC/SDIO */ - G19_24XX_MMC_CLKO, - H18_24XX_MMC_CMD, - F20_24XX_MMC_DAT0, - H14_24XX_MMC_DAT1, - E19_24XX_MMC_DAT2, - D19_24XX_MMC_DAT3, - F19_24XX_MMC_DAT_DIR0, - E20_24XX_MMC_DAT_DIR1, - F18_24XX_MMC_DAT_DIR2, - E18_24XX_MMC_DAT_DIR3, - G18_24XX_MMC_CMD_DIR, - H15_24XX_MMC_CLKI, - - /* Full speed USB */ - J20_24XX_USB0_PUEN, - J19_24XX_USB0_VP, - K20_24XX_USB0_VM, - J18_24XX_USB0_RCV, - K19_24XX_USB0_TXEN, - J14_24XX_USB0_SE0, - K18_24XX_USB0_DAT, - - N14_24XX_USB1_SE0, - W12_24XX_USB1_SE0, - P15_24XX_USB1_DAT, - R13_24XX_USB1_DAT, - W20_24XX_USB1_TXEN, - P13_24XX_USB1_TXEN, - V19_24XX_USB1_RCV, - V12_24XX_USB1_RCV, - - AA10_24XX_USB2_SE0, - Y11_24XX_USB2_DAT, - AA12_24XX_USB2_TXEN, - AA6_24XX_USB2_RCV, - AA4_24XX_USB2_TLLSE0, - - /* Keypad GPIO*/ - T19_24XX_KBR0, - R19_24XX_KBR1, - V18_24XX_KBR2, - M21_24XX_KBR3, - E5__24XX_KBR4, - M18_24XX_KBR5, - R20_24XX_KBC0, - M14_24XX_KBC1, - H19_24XX_KBC2, - V17_24XX_KBC3, - P21_24XX_KBC4, - L14_24XX_KBC5, - N19_24XX_KBC6, - - /* 24xx Menelaus Keypad GPIO */ - B3__24XX_KBR5, - AA4_24XX_KBC2, - B13_24XX_KBC6, - - /* 2430 USB */ - AD9_2430_USB0_PUEN, - Y11_2430_USB0_VP, - AD7_2430_USB0_VM, - AE7_2430_USB0_RCV, - AD4_2430_USB0_TXEN, - AF9_2430_USB0_SE0, - AE6_2430_USB0_DAT, - AD24_2430_USB1_SE0, - AB24_2430_USB1_RCV, - Y25_2430_USB1_TXEN, - AA26_2430_USB1_DAT, - - /* 2430 HS-USB */ - AD9_2430_USB0HS_DATA3, - Y11_2430_USB0HS_DATA4, - AD7_2430_USB0HS_DATA5, - AE7_2430_USB0HS_DATA6, - AD4_2430_USB0HS_DATA2, - AF9_2430_USB0HS_DATA0, - AE6_2430_USB0HS_DATA1, - AE8_2430_USB0HS_CLK, - AD8_2430_USB0HS_DIR, - AE5_2430_USB0HS_STP, - AE9_2430_USB0HS_NXT, - AC7_2430_USB0HS_DATA7, - - /* 2430 McBSP */ - AD6_2430_MCBSP_CLKS, - - AB2_2430_MCBSP1_CLKR, - AD5_2430_MCBSP1_FSR, - AA1_2430_MCBSP1_DX, - AF3_2430_MCBSP1_DR, - AB3_2430_MCBSP1_FSX, - Y9_2430_MCBSP1_CLKX, - - AC10_2430_MCBSP2_FSX, - AD16_2430_MCBSP2_CLX, - AE13_2430_MCBSP2_DX, - AD13_2430_MCBSP2_DR, - AC10_2430_MCBSP2_FSX_OFF, - AD16_2430_MCBSP2_CLX_OFF, - AE13_2430_MCBSP2_DX_OFF, - AD13_2430_MCBSP2_DR_OFF, - - AC9_2430_MCBSP3_CLKX, - AE4_2430_MCBSP3_FSX, - AE2_2430_MCBSP3_DR, - AF4_2430_MCBSP3_DX, - - N3_2430_MCBSP4_CLKX, - AD23_2430_MCBSP4_DR, - AB25_2430_MCBSP4_DX, - AC25_2430_MCBSP4_FSX, - - AE16_2430_MCBSP5_CLKX, - AF12_2430_MCBSP5_FSX, - K7_2430_MCBSP5_DX, - M1_2430_MCBSP5_DR, - - /* 2430 McSPI*/ - Y18_2430_MCSPI1_CLK, - AD15_2430_MCSPI1_SIMO, - AE17_2430_MCSPI1_SOMI, - U1_2430_MCSPI1_CS0, - - /* Touchscreen GPIO */ - AF19_2430_GPIO_85, - -}; - struct omap_mux_cfg { struct pin_config *pins; unsigned long size; diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h index f8efd546..6562cd0 100644 --- a/arch/arm/plat-omap/include/plat/nand.h +++ b/arch/arm/plat-omap/include/plat/nand.h @@ -21,13 +21,11 @@ struct omap_nand_platform_data { int (*dev_ready)(struct omap_nand_platform_data *); int dma_channel; unsigned long phys_base; - void __iomem *gpmc_cs_baseaddr; - void __iomem *gpmc_baseaddr; int devsize; }; -/* size (4 KiB) for IO mapping */ -#define NAND_IO_SIZE SZ_4K +/* minimum size for IO mapping */ +#define NAND_IO_SIZE 4 #if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) extern int gpmc_nand_init(struct omap_nand_platform_data *d); diff --git a/arch/arm/plat-omap/include/plat/nokia-dsi-panel.h b/arch/arm/plat-omap/include/plat/nokia-dsi-panel.h new file mode 100644 index 0000000..01ab657 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/nokia-dsi-panel.h @@ -0,0 +1,31 @@ +#ifndef __ARCH_ARM_PLAT_OMAP_NOKIA_DSI_PANEL_H +#define __ARCH_ARM_PLAT_OMAP_NOKIA_DSI_PANEL_H + +#include "display.h" + +/** + * struct nokia_dsi_panel_data - Nokia DSI panel driver configuration + * @name: panel name + * @use_ext_te: use external TE + * @ext_te_gpio: external TE GPIO + * @use_esd_check: perform ESD checks + * @max_backlight_level: maximum backlight level + * @set_backlight: pointer to backlight set function + * @get_backlight: pointer to backlight get function + */ +struct nokia_dsi_panel_data { + const char *name; + + int reset_gpio; + + bool use_ext_te; + int ext_te_gpio; + + bool use_esd_check; + + int max_backlight_level; + int (*set_backlight)(struct omap_dss_device *dssdev, int level); + int (*get_backlight)(struct omap_dss_device *dssdev); +}; + +#endif /* __ARCH_ARM_PLAT_OMAP_NOKIA_DSI_PANEL_H */ diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h index 3ee41d7..728fbb9 100644 --- a/arch/arm/plat-omap/include/plat/omap-pm.h +++ b/arch/arm/plat-omap/include/plat/omap-pm.h @@ -1,8 +1,8 @@ /* * omap-pm.h - OMAP power management interface * - * Copyright (C) 2008-2009 Texas Instruments, Inc. - * Copyright (C) 2008-2009 Nokia Corporation + * Copyright (C) 2008-2010 Texas Instruments, Inc. + * Copyright (C) 2008-2010 Nokia Corporation * Paul Walmsley * * Interface developed by (in alphabetical order): Karthik Dasu, Jouni @@ -16,6 +16,7 @@ #include <linux/device.h> #include <linux/cpufreq.h> +#include <linux/clk.h> #include "powerdomain.h" @@ -89,7 +90,7 @@ void omap_pm_if_exit(void); * @t: maximum MPU wakeup latency in microseconds * * Request that the maximum interrupt latency for the MPU to be no - * greater than 't' microseconds. "Interrupt latency" in this case is + * greater than @t microseconds. "Interrupt latency" in this case is * defined as the elapsed time from the occurrence of a hardware or * timer interrupt to the time when the device driver's interrupt * service routine has been entered by the MPU. @@ -105,15 +106,19 @@ void omap_pm_if_exit(void); * elapsed from when a device driver enables a hardware device with * clk_enable(), to when the device is ready for register access or * other use. To control this device wakeup latency, use - * set_max_dev_wakeup_lat() + * omap_pm_set_max_dev_wakeup_lat() * - * Multiple calls to set_max_mpu_wakeup_lat() will replace the + * Multiple calls to omap_pm_set_max_mpu_wakeup_lat() will replace the * previous t value. To remove the latency target for the MPU, call * with t = -1. * - * No return value. + * XXX This constraint will be deprecated soon in favor of the more + * general omap_pm_set_max_dev_wakeup_lat() + * + * Returns -EINVAL for an invalid argument, -ERANGE if the constraint + * is not satisfiable, or 0 upon success. */ -void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); +int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); /** @@ -123,8 +128,8 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); * @r: minimum throughput (in KiB/s) * * Request that the minimum data throughput on the OCP interconnect - * attached to device 'dev' interconnect agent 'tbus_id' be no less - * than 'r' KiB/s. + * attached to device @dev interconnect agent @tbus_id be no less + * than @r KiB/s. * * It is expected that the OMAP PM or bus code will use this * information to set the interconnect clock to run at the lowest @@ -138,40 +143,44 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); * code will also need to add an minimum L3 interconnect speed * constraint, * - * Multiple calls to set_min_bus_tput() will replace the previous rate - * value for this device. To remove the interconnect throughput - * restriction for this device, call with r = 0. + * Multiple calls to omap_pm_set_min_bus_tput() will replace the + * previous rate value for this device. To remove the interconnect + * throughput restriction for this device, call with r = 0. * - * No return value. + * Returns -EINVAL for an invalid argument, -ERANGE if the constraint + * is not satisfiable, or 0 upon success. */ -void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r); +int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r); /** * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency - * @dev: struct device * + * @req_dev: struct device * requesting the constraint, or NULL if none + * @dev: struct device * to set the constraint one * @t: maximum device wakeup latency in microseconds * - * Request that the maximum amount of time necessary for a device to - * become accessible after its clocks are enabled should be no greater - * than 't' microseconds. Specifically, this represents the time from - * when a device driver enables device clocks with clk_enable(), to - * when the register reads and writes on the device will succeed. - * This function should be called before clk_disable() is called, - * since the power state transition decision may be made during - * clk_disable(). + * Request that the maximum amount of time necessary for a device @dev + * to become accessible after its clocks are enabled should be no + * greater than @t microseconds. Specifically, this represents the + * time from when a device driver enables device clocks with + * clk_enable(), to when the register reads and writes on the device + * will succeed. This function should be called before clk_disable() + * is called, since the power state transition decision may be made + * during clk_disable(). * * It is intended that underlying PM code will use this information to * determine what power state to put the powerdomain enclosing this * device into. * - * Multiple calls to set_max_dev_wakeup_lat() will replace the - * previous wakeup latency values for this device. To remove the wakeup - * latency restriction for this device, call with t = -1. + * Multiple calls to omap_pm_set_max_dev_wakeup_lat() will replace the + * previous wakeup latency values for this device. To remove the + * wakeup latency restriction for this device, call with t = -1. * - * No return value. + * Returns -EINVAL for an invalid argument, -ERANGE if the constraint + * is not satisfiable, or 0 upon success. */ -void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t); +int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev, + long t); /** @@ -198,10 +207,71 @@ void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t); * value for this device. To remove the maximum DMA latency for this * device, call with t = -1. * - * No return value. + * Returns -EINVAL for an invalid argument, -ERANGE if the constraint + * is not satisfiable, or 0 upon success. */ -void omap_pm_set_max_sdma_lat(struct device *dev, long t); +int omap_pm_set_max_sdma_lat(struct device *dev, long t); + +/** + * omap_pm_set_min_clk_rate - set minimum clock rate requested by @dev + * @dev: struct device * requesting the constraint + * @clk: struct clk * to set the minimum rate constraint on + * @r: minimum rate in Hz + * + * Request that the minimum clock rate on the device @dev's clk @clk + * be no less than @r Hz. + * + * It is expected that the OMAP PM code will use this information to + * find an OPP or clock setting that will satisfy this clock rate + * constraint, along with any other applicable system constraints on + * the clock rate or corresponding voltage, etc. + * + * omap_pm_set_min_clk_rate() differs from the clock code's + * clk_set_rate() in that it considers other constraints before taking + * any hardware action, and may change a system OPP rather than just a + * clock rate. clk_set_rate() is intended to be a low-level + * interface. + * + * omap_pm_set_min_clk_rate() is easily open to abuse. A better API + * would be something like "omap_pm_set_min_dev_performance()"; + * however, there is no easily-generalizable concept of performance + * that applies to all devices. Only a device (and possibly the + * device subsystem) has both the subsystem-specific knowledge, and + * the hardware IP block-specific knowledge, to translate a constraint + * on "touchscreen sampling accuracy" or "number of pixels or polygons + * rendered per second" to a clock rate. This translation can be + * dependent on the hardware IP block's revision, or firmware version, + * and the driver is the only code on the system that has this + * information and can know how to translate that into a clock rate. + * + * The intended use-case for this function is for userspace or other + * kernel code to communicate a particular performance requirement to + * a subsystem; then for the subsystem to communicate that requirement + * to something that is meaningful to the device driver; then for the + * device driver to convert that requirement to a clock rate, and to + * then call omap_pm_set_min_clk_rate(). + * + * Users of this function (such as device drivers) should not simply + * call this function with some high clock rate to ensure "high + * performance." Rather, the device driver should take a performance + * constraint from its subsystem, such as "render at least X polygons + * per second," and use some formula or table to convert that into a + * clock rate constraint given the hardware type and hardware + * revision. Device drivers or subsystems should not assume that they + * know how to make a power/performance tradeoff - some device use + * cases may tolerate a lower-fidelity device function for lower power + * consumption; others may demand a higher-fidelity device function, + * no matter what the power consumption. + * + * Multiple calls to omap_pm_set_min_clk_rate() will replace the + * previous rate value for the device @dev. To remove the minimum clock + * rate constraint for the device, call with r = 0. + * + * Returns -EINVAL for an invalid argument, -ERANGE if the constraint + * is not satisfiable, or 0 upon success. + */ +int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r); /* * DSP Bridge-specific constraints diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index 3694b62..25cd9ac 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -101,6 +101,8 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, int omap_device_register(struct omap_device *od); int omap_early_device_register(struct omap_device *od); +void __iomem *omap_device_get_rt_va(struct omap_device *od); + /* OMAP PM interface */ int omap_device_align_pm_lat(struct platform_device *pdev, u32 new_wakeup_lat_limit); diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 0eccc09..a4e508d 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -1,7 +1,7 @@ /* * omap_hwmod macros, structures * - * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2009-2010 Nokia Corporation * Paul Walmsley * * Created in collaboration with (alphabetical order): BenoƮt Cousson, @@ -419,7 +419,7 @@ struct omap_hwmod_class { * @slaves: ptr to array of OCP ifs that this hwmod can respond on * @dev_attr: arbitrary device attributes that can be passed to the driver * @_sysc_cache: internal-use hwmod flags - * @_rt_va: cached register target start address (internal use) + * @_mpu_rt_va: cached register target start address (internal use) * @_mpu_port_index: cached MPU register target slave ID (internal use) * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6) * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift @@ -460,7 +460,7 @@ struct omap_hwmod { struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */ void *dev_attr; u32 _sysc_cache; - void __iomem *_rt_va; + void __iomem *_mpu_rt_va; struct list_head node; u16 flags; u8 _mpu_port_index; @@ -482,11 +482,14 @@ int omap_hwmod_init(struct omap_hwmod **ohs); int omap_hwmod_register(struct omap_hwmod *oh); int omap_hwmod_unregister(struct omap_hwmod *oh); struct omap_hwmod *omap_hwmod_lookup(const char *name); -int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh)); -int omap_hwmod_late_init(void); +int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), + void *data); +int omap_hwmod_late_init(u8 skip_setup_idle); int omap_hwmod_enable(struct omap_hwmod *oh); +int _omap_hwmod_enable(struct omap_hwmod *oh); int omap_hwmod_idle(struct omap_hwmod *oh); +int _omap_hwmod_idle(struct omap_hwmod *oh); int omap_hwmod_shutdown(struct omap_hwmod *oh); int omap_hwmod_enable_clocks(struct omap_hwmod *oh); @@ -504,6 +507,7 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh); int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh); +void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh); int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh); diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h index 8983d54..6a3ff65 100644 --- a/arch/arm/plat-omap/include/plat/smp.h +++ b/arch/arm/plat-omap/include/plat/smp.h @@ -30,6 +30,7 @@ extern void omap_secondary_startup(void); extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask); extern void omap_auxcoreboot_addr(u32 cpu_addr); +extern u32 omap_read_auxcoreboot0(void); /* * We use Soft IRQ1 as the IPI diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index bbedd71..ddf723b 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -25,6 +25,8 @@ #include <plat/serial.h> +#define MDR1_MODE_MASK 0x07 + static volatile u8 *uart_base; static int uart_shift; @@ -42,6 +44,10 @@ static void putc(int c) if (!uart_base) return; + /* Check for UART 16x mode */ + if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0) + return; + while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE)) barrier(); uart_base[UART_TX << uart_shift] = c; diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 98eef53..2a9427c 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -81,7 +81,34 @@ extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata); #endif -void omap_usb_init(struct omap_usb_config *pdata); + +/* + * FIXME correct answer depends on hmc_mode, + * as does (on omap1) any nonzero value for config->otg port number + */ +#ifdef CONFIG_USB_GADGET_OMAP +#define is_usb0_device(config) 1 +#else +#define is_usb0_device(config) 0 +#endif + +void omap_otg_init(struct omap_usb_config *config); + +#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE) +void omap1_usb_init(struct omap_usb_config *pdata); +#else +static inline void omap1_usb_init(struct omap_usb_config *pdata) +{ +} +#endif + +#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE) +void omap2_usbfs_init(struct omap_usb_config *pdata); +#else +static inline omap2_usbfs_init(struct omap_usb_config *pdata) +{ +} +#endif /*-------------------------------------------------------------------------*/ @@ -192,4 +219,24 @@ void omap_usb_init(struct omap_usb_config *pdata); # define USB0PUENACTLOI (1 << 16) # define USBSTANDBYCTRL (1 << 15) +#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB) +u32 omap1_usb0_init(unsigned nwires, unsigned is_device); +u32 omap1_usb1_init(unsigned nwires); +u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup); +#else +static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device) +{ + return 0; +} +static inline u32 omap1_usb1_init(unsigned nwires) +{ + return 0; + +} +static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) +{ + return 0; +} +#endif + #endif /* __ASM_ARCH_OMAP_USB_H */ |