arm: omap: usb: create common enums and structures for ehci and ohci

Create the ehci and ohci specific platform data structures.
The port enum values are made common for both ehci and ohci.

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

1 files changed, 35 insertions, 19 deletions

diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index f888e0e..32dfe08 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -7,15 +7,12 @@
 #include <plat/board.h>
 
 #define OMAP3_HS_USB_PORTS	3
-enum ehci_hcd_omap_mode {
-	EHCI_HCD_OMAP_MODE_UNKNOWN,
-	EHCI_HCD_OMAP_MODE_PHY,
-	EHCI_HCD_OMAP_MODE_TLL,
-	EHCI_HCD_OMAP_MODE_HSIC,
-};
 
-enum ohci_omap3_port_mode {
-	OMAP_OHCI_PORT_MODE_UNUSED,
+enum usbhs_omap_port_mode {
+	OMAP_USBHS_PORT_MODE_UNUSED,
+	OMAP_EHCI_PORT_MODE_PHY,
+	OMAP_EHCI_PORT_MODE_TLL,
+	OMAP_EHCI_PORT_MODE_HSIC,
 	OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
 	OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
 	OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
@@ -25,24 +22,45 @@ enum ohci_omap3_port_mode {
 	OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
 	OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
 	OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
-	OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM,
+	OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
 };
 
-struct ehci_hcd_omap_platform_data {
-	enum ehci_hcd_omap_mode		port_mode[OMAP3_HS_USB_PORTS];
-	unsigned			phy_reset:1;
+struct usbhs_omap_board_data {
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
 
 	/* have to be valid if phy_reset is true and portx is in phy mode */
 	int	reset_gpio_port[OMAP3_HS_USB_PORTS];
+
+	/* Set this to true for ES2.x silicon */
+	unsigned			es2_compatibility:1;
+
+	unsigned			phy_reset:1;
+
+	/*
+	 * Regulators for USB PHYs.
+	 * Each PHY can have a separate regulator.
+	 */
+	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
 };
 
-struct ohci_hcd_omap_platform_data {
-	enum ohci_omap3_port_mode	port_mode[OMAP3_HS_USB_PORTS];
+struct ehci_hcd_omap_platform_data {
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
+	int				reset_gpio_port[OMAP3_HS_USB_PORTS];
+	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
+	unsigned			phy_reset:1;
+};
 
-	/* Set this to true for ES2.x silicon */
+struct ohci_hcd_omap_platform_data {
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
 	unsigned			es2_compatibility:1;
 };
 
+struct usbhs_omap_platform_data {
+	enum usbhs_omap_port_mode		port_mode[OMAP3_HS_USB_PORTS];
+
+	struct ehci_hcd_omap_platform_data	*ehci_data;
+	struct ohci_hcd_omap_platform_data	*ohci_data;
+};
 /*-------------------------------------------------------------------------*/
 
 #define OMAP1_OTG_BASE			0xfffb0400
@@ -80,19 +98,17 @@ enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
 
 extern void usb_musb_init(struct omap_musb_board_data *board_data);
 
-extern void usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata);
+extern void usb_ehci_init(const struct usbhs_omap_board_data *pdata);
 
-extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata);
+extern void usb_ohci_init(const struct usbhs_omap_board_data *pdata);
 
 extern int omap4430_phy_power(struct device *dev, int ID, int on);
 extern int omap4430_phy_set_clk(struct device *dev, int on);
 extern int omap4430_phy_init(struct device *dev);
 extern int omap4430_phy_exit(struct device *dev);
 extern int omap4430_phy_suspend(struct device *dev, int suspend);
-
 #endif
 
-
 /*
  * FIXME correct answer depends on hmc_mode,
  * as does (on omap1) any nonzero value for config->otg port number