summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-nomadik
diff options
context:
space:
mode:
authorAlessandro Rubini <rubini@gnudd.com>2010-03-05 12:38:51 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2010-03-19 18:31:51 +0000
commitb102c01faed5e0083a4e6d29a2d61f6b57716e94 (patch)
tree2988fc53122d3b2ddea58791bf7bb4a819b07b0c /arch/arm/plat-nomadik
parent94bdc0e2d76c5f2467346bf14e7e16d6d8e0395d (diff)
downloadop-kernel-dev-b102c01faed5e0083a4e6d29a2d61f6b57716e94.zip
op-kernel-dev-b102c01faed5e0083a4e6d29a2d61f6b57716e94.tar.gz
ARM: 5978/1: plat-nomadik: use one-shot clock events
This is a complete rewrite of the MTU driver, using one-shot for events and a free-running timer for stamping. It allows CONFIG_NO_HZ and CONFIG_HIGH_RES_TIMERS to work on Nomadik and Ux500. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/plat-nomadik')
-rw-r--r--arch/arm/plat-nomadik/timer.c125
1 files changed, 63 insertions, 62 deletions
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index fa7cb3a..db67402 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -2,7 +2,7 @@
* linux/arch/arm/mach-nomadik/timer.c
*
* Copyright (C) 2008 STMicroelectronics
- * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x
+ * Copyright (C) 2010 Alessandro Rubini
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2, as
@@ -18,123 +18,124 @@
#include <plat/mtu.h>
-static u32 nmdk_count; /* accumulated count */
-static u32 nmdk_cycle; /* write-once */
+void __iomem *mtu_base; /* ssigned by machine code */
-/* setup by the platform code */
-void __iomem *mtu_base;
-
-/*
- * clocksource: the MTU device is a decrementing counters, so we negate
- * the value being read.
- */
+/* clocksource: MTU decrements, so we negate the value being read. */
static cycle_t nmdk_read_timer(struct clocksource *cs)
{
- u32 count = readl(mtu_base + MTU_VAL(0));
- return nmdk_count + nmdk_cycle - count;
-
+ return -readl(mtu_base + MTU_VAL(0));
}
static struct clocksource nmdk_clksrc = {
.name = "mtu_0",
- .rating = 120,
+ .rating = 200,
.read = nmdk_read_timer,
+ .mask = CLOCKSOURCE_MASK(32),
.shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-/*
- * Clockevent device: currently only periodic mode is supported
- */
+/* Clockevent device: use one-shot mode */
static void nmdk_clkevt_mode(enum clock_event_mode mode,
struct clock_event_device *dev)
{
+ u32 cr;
+
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- /* count current value? */
- writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC);
+ pr_err("%s: periodic mode not supported\n", __func__);
break;
case CLOCK_EVT_MODE_ONESHOT:
- BUG(); /* Not supported, yet */
- /* FALLTHROUGH */
+ /* Load highest value, enable device, enable interrupts */
+ cr = readl(mtu_base + MTU_CR(1));
+ writel(0, mtu_base + MTU_LR(1));
+ writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1));
+ writel(0x2, mtu_base + MTU_IMSC);
+ break;
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
- writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC);
+ /* disable irq */
+ writel(0, mtu_base + MTU_IMSC);
break;
case CLOCK_EVT_MODE_RESUME:
break;
}
}
+static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
+{
+ /* writing the value has immediate effect */
+ writel(evt, mtu_base + MTU_LR(1));
+ return 0;
+}
+
static struct clock_event_device nmdk_clkevt = {
- .name = "mtu_0",
- .features = CLOCK_EVT_FEAT_PERIODIC,
+ .name = "mtu_1",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
.shift = 32,
- .rating = 100,
+ .rating = 200,
.set_mode = nmdk_clkevt_mode,
+ .set_next_event = nmdk_clkevt_next,
};
/*
- * IRQ Handler for the timer 0 of the MTU block. The irq is not shared
- * as we are the only users of mtu0 by now.
+ * IRQ Handler for timer 1 of the MTU block.
*/
static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
{
- /* ack: "interrupt clear register" */
- writel(1 << 0, mtu_base + MTU_ICR);
-
- /* we can't count lost ticks, unfortunately */
- nmdk_count += nmdk_cycle;
- nmdk_clkevt.event_handler(&nmdk_clkevt);
+ struct clock_event_device *evdev = dev_id;
+ writel(1 << 1, mtu_base + MTU_ICR); /* Interrupt clear reg */
+ evdev->event_handler(evdev);
return IRQ_HANDLED;
}
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
static struct irqaction nmdk_timer_irq = {
.name = "Nomadik Timer Tick",
.flags = IRQF_DISABLED | IRQF_TIMER,
.handler = nmdk_timer_interrupt,
+ .dev_id = &nmdk_clkevt,
};
-static void nmdk_timer_reset(void)
-{
- u32 cr;
-
- writel(0, mtu_base + MTU_CR(0)); /* off */
-
- /* configure load and background-load, and fire it up */
- writel(nmdk_cycle, mtu_base + MTU_LR(0));
- writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
- cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS;
- writel(cr, mtu_base + MTU_CR(0));
- writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
-}
-
void __init nmdk_timer_init(void)
{
unsigned long rate;
- int bits;
-
- rate = CLOCK_TICK_RATE; /* 2.4MHz */
- nmdk_cycle = (rate + HZ/2) / HZ;
+ u32 cr = MTU_CRn_32BITS;;
+
+ /*
+ * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
+ * use a divide-by-16 counter if it's more than 16MHz
+ */
+ rate = CLOCK_TICK_RATE;
+ if (rate > 16 << 20) {
+ rate /= 16;
+ cr |= MTU_CRn_PRESCALE_16;
+ } else {
+ cr |= MTU_CRn_PRESCALE_1;
+ }
- /* Init the timer and register clocksource */
- nmdk_timer_reset();
+ /* Timer 0 is the free running clocksource */
+ writel(cr, mtu_base + MTU_CR(0));
+ writel(0, mtu_base + MTU_LR(0));
+ writel(0, mtu_base + MTU_BGLR(0));
+ writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift);
- bits = 8*sizeof(nmdk_count);
- nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
if (clocksource_register(&nmdk_clksrc))
- printk(KERN_ERR "timer: failed to initialize clock "
- "source %s\n", nmdk_clksrc.name);
+ pr_err("timer: failed to initialize clock source %s\n",
+ nmdk_clksrc.name);
+
+ /* Timer 1 is used for events, fix according to rate */
+ writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
+ nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
+ nmdk_clkevt.max_delta_ns =
+ clockevent_delta2ns(0xffffffff, &nmdk_clkevt);
+ nmdk_clkevt.min_delta_ns =
+ clockevent_delta2ns(0x00000002, &nmdk_clkevt);
+ nmdk_clkevt.cpumask = cpumask_of(0);
/* Register irq and clockevents */
setup_irq(IRQ_MTU0, &nmdk_timer_irq);
- nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
- nmdk_clkevt.cpumask = cpumask_of(0);
clockevents_register_device(&nmdk_clkevt);
}
OpenPOWER on IntegriCloud