Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 934 insertions, 0 deletions

diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
new file mode 100644
index 0000000..2d977b4
--- /dev/null
+++ b/arch/arm/mm/proc-xscale.S
@@ -0,0 +1,934 @@
+/*
+ *  linux/arch/arm/mm/proc-xscale.S
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	November 2000
+ *  Copyright:	(C) 2000, 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * MMU functions for the Intel XScale CPUs
+ *
+ * 2001 Aug 21:
+ *	some contributions by Brett Gaines <brett.w.gaines@intel.com>
+ *	Copyright 2001 by Intel Corp.
+ *
+ * 2001 Sep 08:
+ *	Completely revisited, many important fixes
+ *	Nicolas Pitre <nico@cam.org>
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/procinfo.h>
+#include <asm/hardware.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include "proc-macros.S"
+
+/*
+ * This is the maximum size of an area which will be flushed.  If the area
+ * is larger than this, then we flush the whole cache
+ */
+#define MAX_AREA_SIZE	32768
+
+/*
+ * the cache line size of the I and D cache
+ */
+#define CACHELINESIZE	32
+
+/*
+ * the size of the data cache
+ */
+#define CACHESIZE	32768
+
+/*
+ * Virtual address used to allocate the cache when flushed
+ *
+ * This must be an address range which is _never_ used.  It should
+ * apparently have a mapping in the corresponding page table for
+ * compatibility with future CPUs that _could_ require it.  For instance we
+ * don't care.
+ *
+ * This must be aligned on a 2*CACHESIZE boundary.  The code selects one of
+ * the 2 areas in alternance each time the clean_d_cache macro is used.
+ * Without this the XScale core exhibits cache eviction problems and no one
+ * knows why.
+ *
+ * Reminder: the vector table is located at 0xffff0000-0xffff0fff.
+ */
+#define CLEAN_ADDR	0xfffe0000
+
+/*
+ * This macro is used to wait for a CP15 write and is needed
+ * when we have to ensure that the last operation to the co-pro
+ * was completed before continuing with operation.
+ */
+	.macro	cpwait, rd
+	mrc	p15, 0, \rd, c2, c0, 0		@ arbitrary read of cp15
+	mov	\rd, \rd			@ wait for completion
+	sub 	pc, pc, #4			@ flush instruction pipeline
+	.endm
+
+	.macro	cpwait_ret, lr, rd
+	mrc	p15, 0, \rd, c2, c0, 0		@ arbitrary read of cp15
+	sub	pc, \lr, \rd, LSR #32		@ wait for completion and
+						@ flush instruction pipeline
+	.endm
+
+/*
+ * This macro cleans the entire dcache using line allocate.
+ * The main loop has been unrolled to reduce loop overhead.
+ * rd and rs are two scratch registers.
+ */
+	.macro  clean_d_cache, rd, rs
+	ldr	\rs, =clean_addr
+	ldr	\rd, [\rs]
+	eor	\rd, \rd, #CACHESIZE
+	str	\rd, [\rs]
+	add	\rs, \rd, #CACHESIZE
+1:	mcr	p15, 0, \rd, c7, c2, 5		@ allocate D cache line
+	add	\rd, \rd, #CACHELINESIZE
+	mcr	p15, 0, \rd, c7, c2, 5		@ allocate D cache line
+	add	\rd, \rd, #CACHELINESIZE
+	mcr	p15, 0, \rd, c7, c2, 5		@ allocate D cache line
+	add	\rd, \rd, #CACHELINESIZE
+	mcr	p15, 0, \rd, c7, c2, 5		@ allocate D cache line
+	add	\rd, \rd, #CACHELINESIZE
+	teq	\rd, \rs
+	bne	1b
+	.endm
+
+	.data
+clean_addr:	.word	CLEAN_ADDR
+
+	.text
+
+/*
+ * cpu_xscale_proc_init()
+ *
+ * Nothing too exciting at the moment
+ */
+ENTRY(cpu_xscale_proc_init)
+	mov	pc, lr
+
+/*
+ * cpu_xscale_proc_fin()
+ */
+ENTRY(cpu_xscale_proc_fin)
+	str	lr, [sp, #-4]!
+	mov	r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
+	msr	cpsr_c, r0
+	bl	xscale_flush_kern_cache_all	@ clean caches
+	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
+	bic	r0, r0, #0x1800			@ ...IZ...........
+	bic	r0, r0, #0x0006			@ .............CA.
+	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
+	ldr	pc, [sp], #4
+
+/*
+ * cpu_xscale_reset(loc)
+ *
+ * Perform a soft reset of the system.  Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+	.align	5
+ENTRY(cpu_xscale_reset)
+	mov	r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
+	msr	cpsr_c, r1			@ reset CPSR
+	mrc	p15, 0, r1, c1, c0, 0		@ ctrl register
+	bic	r1, r1, #0x0086			@ ........B....CA.
+	bic	r1, r1, #0x3900			@ ..VIZ..S........
+	mcr	p15, 0, r1, c1, c0, 0		@ ctrl register
+	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches & BTB
+	bic	r1, r1, #0x0001			@ ...............M
+	mcr	p15, 0, r1, c1, c0, 0		@ ctrl register
+	@ CAUTION: MMU turned off from this point. We count on the pipeline
+	@ already containing those two last instructions to survive.
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+	mov	pc, r0
+
+/*
+ * cpu_xscale_do_idle()
+ *
+ * Cause the processor to idle
+ *
+ * For now we do nothing but go to idle mode for every case
+ *
+ * XScale supports clock switching, but using idle mode support
+ * allows external hardware to react to system state changes.
+ */
+	.align	5
+
+ENTRY(cpu_xscale_do_idle)
+	mov	r0, #1
+	mcr	p14, 0, r0, c7, c0, 0		@ Go to IDLE
+	mov	pc, lr
+
+/* ================================= CACHE ================================ */
+
+/*
+ *	flush_user_cache_all()
+ *
+ *	Invalidate all cache entries in a particular address
+ *	space.
+ */
+ENTRY(xscale_flush_user_cache_all)
+	/* FALLTHROUGH */
+
+/*
+ *	flush_kern_cache_all()
+ *
+ *	Clean and invalidate the entire cache.
+ */
+ENTRY(xscale_flush_kern_cache_all)
+	mov	r2, #VM_EXEC
+	mov	ip, #0
+__flush_whole_cache:
+	clean_d_cache r0, r1
+	tst	r2, #VM_EXEC
+	mcrne	p15, 0, ip, c7, c5, 0		@ Invalidate I cache & BTB
+	mcrne	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
+	mov	pc, lr
+
+/*
+ *	flush_user_cache_range(start, end, vm_flags)
+ *
+ *	Invalidate a range of cache entries in the specified
+ *	address space.
+ *
+ *	- start - start address (may not be aligned)
+ *	- end	- end address (exclusive, may not be aligned)
+ *	- vma	- vma_area_struct describing address space
+ */
+	.align	5
+ENTRY(xscale_flush_user_cache_range)
+	mov	ip, #0
+	sub	r3, r1, r0			@ calculate total size
+	cmp	r3, #MAX_AREA_SIZE
+	bhs	__flush_whole_cache
+
+1:	tst	r2, #VM_EXEC
+	mcrne	p15, 0, r0, c7, c5, 1		@ Invalidate I cache line
+	mcr	p15, 0, r0, c7, c10, 1		@ Clean D cache line
+	mcr	p15, 0, r0, c7, c6, 1		@ Invalidate D cache line
+	add	r0, r0, #CACHELINESIZE
+	cmp	r0, r1
+	blo	1b
+	tst	r2, #VM_EXEC
+	mcrne	p15, 0, ip, c7, c5, 6		@ Invalidate BTB
+	mcrne	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
+	mov	pc, lr
+
+/*
+ *	coherent_kern_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ *
+ *	Note: single I-cache line invalidation isn't used here since
+ *	it also trashes the mini I-cache used by JTAG debuggers.
+ */
+ENTRY(xscale_coherent_kern_range)
+	/* FALLTHROUGH */
+
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ *
+ *	Note: single I-cache line invalidation isn't used here since
+ *	it also trashes the mini I-cache used by JTAG debuggers.
+ */
+ENTRY(xscale_coherent_user_range)
+	bic	r0, r0, #CACHELINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #CACHELINESIZE
+	cmp	r0, r1
+	blo	1b
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ Invalidate I cache & BTB
+	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
+	mov	pc, lr
+
+/*
+ *	flush_kern_dcache_page(void *page)
+ *
+ *	Ensure no D cache aliasing occurs, either with itself or
+ *	the I cache
+ *
+ *	- addr	- page aligned address
+ */
+ENTRY(xscale_flush_kern_dcache_page)
+	add	r1, r0, #PAGE_SZ
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	add	r0, r0, #CACHELINESIZE
+	cmp	r0, r1
+	blo	1b
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ Invalidate I cache & BTB
+	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
+	mov	pc, lr
+
+/*
+ *	dma_inv_range(start, end)
+ *
+ *	Invalidate (discard) the specified virtual address range.
+ *	May not write back any entries.  If 'start' or 'end'
+ *	are not cache line aligned, those lines must be written
+ *	back.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(xscale_dma_inv_range)
+	mrc	p15, 0, r2, c0, c0, 0		@ read ID
+	eor	r2, r2, #0x69000000
+	eor	r2, r2, #0x00052000
+	bics	r2, r2, #1
+	beq	xscale_dma_flush_range
+
+	tst	r0, #CACHELINESIZE - 1
+	bic	r0, r0, #CACHELINESIZE - 1
+	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
+	tst	r1, #CACHELINESIZE - 1
+	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
+1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	add	r0, r0, #CACHELINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
+	mov	pc, lr
+
+/*
+ *	dma_clean_range(start, end)
+ *
+ *	Clean the specified virtual address range.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(xscale_dma_clean_range)
+	bic	r0, r0, #CACHELINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #CACHELINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
+	mov	pc, lr
+
+/*
+ *	dma_flush_range(start, end)
+ *
+ *	Clean and invalidate the specified virtual address range.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(xscale_dma_flush_range)
+	bic	r0, r0, #CACHELINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	add	r0, r0, #CACHELINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
+	mov	pc, lr
+
+ENTRY(xscale_cache_fns)
+	.long	xscale_flush_kern_cache_all
+	.long	xscale_flush_user_cache_all
+	.long	xscale_flush_user_cache_range
+	.long	xscale_coherent_kern_range
+	.long	xscale_coherent_user_range
+	.long	xscale_flush_kern_dcache_page
+	.long	xscale_dma_inv_range
+	.long	xscale_dma_clean_range
+	.long	xscale_dma_flush_range
+
+ENTRY(cpu_xscale_dcache_clean_area)
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #CACHELINESIZE
+	subs	r1, r1, #CACHELINESIZE
+	bhi	1b
+	mov	pc, lr
+
+/* ================================ CACHE LOCKING============================
+ *
+ * The XScale MicroArchitecture implements support for locking entries into
+ * the data and instruction cache.  The following functions implement the core
+ * low level instructions needed to accomplish the locking.  The developer's
+ * manual states that the code that performs the locking must be in non-cached
+ * memory.  To accomplish this, the code in xscale-cache-lock.c copies the
+ * following functions from the cache into a non-cached memory region that
+ * is allocated through consistent_alloc().
+ *
+ */
+	.align	5
+/*
+ * xscale_icache_lock
+ *
+ * r0: starting address to lock
+ * r1: end address to lock
+ */
+ENTRY(xscale_icache_lock)
+
+iLockLoop:
+	bic	r0, r0, #CACHELINESIZE - 1
+	mcr	p15, 0, r0, c9, c1, 0	@ lock into cache
+	cmp	r0, r1			@ are we done?
+	add	r0, r0, #CACHELINESIZE	@ advance to next cache line
+	bls	iLockLoop
+	mov	pc, lr
+
+/*
+ * xscale_icache_unlock
+ */
+ENTRY(xscale_icache_unlock)
+	mcr	p15, 0, r0, c9, c1, 1	@ Unlock icache
+	mov	pc, lr
+
+/*
+ * xscale_dcache_lock
+ *
+ * r0: starting address to lock
+ * r1: end address to lock
+ */
+ENTRY(xscale_dcache_lock)
+	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
+	mov	r2, #1
+	mcr	p15, 0, r2, c9, c2, 0	@ Put dcache in lock mode
+	cpwait	ip			@ Wait for completion
+
+	mrs	r2, cpsr
+	orr	r3, r2, #PSR_F_BIT | PSR_I_BIT
+dLockLoop:
+	msr	cpsr_c, r3
+	mcr	p15, 0, r0, c7, c10, 1	@ Write back line if it is dirty
+	mcr	p15, 0, r0, c7, c6, 1	@ Flush/invalidate line
+	msr	cpsr_c, r2
+	ldr	ip, [r0], #CACHELINESIZE @ Preload 32 bytes into cache from
+					@ location [r0]. Post-increment
+					@ r3 to next cache line
+	cmp	r0, r1			@ Are we done?
+	bls	dLockLoop
+
+	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
+	mov	r2, #0
+	mcr	p15, 0, r2, c9, c2, 0	@ Get out of lock mode
+	cpwait_ret lr, ip
+
+/*
+ * xscale_dcache_unlock
+ */
+ENTRY(xscale_dcache_unlock)
+	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
+	mcr	p15, 0, ip, c9, c2, 1	@ Unlock cache
+	mov	pc, lr
+
+/*
+ * Needed to determine the length of the code that needs to be copied.
+ */
+	.align	5
+ENTRY(xscale_cache_dummy)
+	mov	pc, lr
+
+/* ================================ TLB LOCKING==============================
+ *
+ * The XScale MicroArchitecture implements support for locking entries into
+ * the Instruction and Data TLBs.  The following functions provide the
+ * low level support for supporting these under Linux.  xscale-lock.c
+ * implements some higher level management code.  Most of the following
+ * is taken straight out of the Developer's Manual.
+ */
+
+/*
+ * Lock I-TLB entry
+ *
+ * r0: Virtual address to translate and lock
+ */
+	.align	5
+ENTRY(xscale_itlb_lock)
+	mrs	r2, cpsr
+	orr	r3, r2, #PSR_F_BIT | PSR_I_BIT
+	msr	cpsr_c, r3			@ Disable interrupts
+	mcr	p15, 0, r0, c8, c5, 1		@ Invalidate I-TLB entry
+	mcr	p15, 0, r0, c10, c4, 0		@ Translate and lock
+	msr	cpsr_c, r2			@ Restore interrupts
+	cpwait_ret lr, ip
+
+/*
+ * Lock D-TLB entry
+ *
+ * r0: Virtual address to translate and lock
+ */
+	.align	5
+ENTRY(xscale_dtlb_lock)
+	mrs	r2, cpsr
+	orr	r3, r2, #PSR_F_BIT | PSR_I_BIT
+	msr	cpsr_c, r3			@ Disable interrupts
+	mcr	p15, 0, r0, c8, c6, 1		@ Invalidate D-TLB entry
+	mcr	p15, 0, r0, c10, c8, 0		@ Translate and lock
+	msr	cpsr_c, r2			@ Restore interrupts
+	cpwait_ret lr, ip
+
+/*
+ * Unlock all I-TLB entries
+ */
+	.align	5
+ENTRY(xscale_itlb_unlock)
+	mcr	p15, 0, ip, c10, c4, 1		@ Unlock I-TLB
+	mcr	p15, 0, ip, c8, c5, 0		@ Invalidate I-TLB
+	cpwait_ret lr, ip
+
+/*
+ * Unlock all D-TLB entries
+ */
+ENTRY(xscale_dtlb_unlock)
+	mcr	p15, 0, ip, c10, c8, 1		@ Unlock D-TBL
+	mcr	p15, 0, ip, c8, c6, 0		@ Invalidate D-TLB
+	cpwait_ret lr, ip
+
+/* =============================== PageTable ============================== */
+
+#define PTE_CACHE_WRITE_ALLOCATE 0
+
+/*
+ * cpu_xscale_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+	.align	5
+ENTRY(cpu_xscale_switch_mm)
+	clean_d_cache r1, r2
+	mcr	p15, 0, ip, c7, c5, 0		@ Invalidate I cache & BTB
+	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
+	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+	cpwait_ret lr, ip
+
+/*
+ * cpu_xscale_set_pte(ptep, pte)
+ *
+ * Set a PTE and flush it out
+ *
+ * Errata 40: must set memory to write-through for user read-only pages.
+ */
+	.align	5
+ENTRY(cpu_xscale_set_pte)
+	str	r1, [r0], #-2048		@ linux version
+
+	bic	r2, r1, #0xff0
+	orr	r2, r2, #PTE_TYPE_EXT		@ extended page
+
+	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+	tst	r3, #L_PTE_USER			@ User?
+	orrne	r2, r2, #PTE_EXT_AP_URO_SRW	@ yes -> user r/o, system r/w
+
+	tst	r3, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
+	orreq	r2, r2, #PTE_EXT_AP_UNO_SRW	@ yes -> user n/a, system r/w
+						@ combined with user -> user r/w
+
+	@
+	@ Handle the X bit.  We want to set this bit for the minicache
+	@ (U = E = B = W = 0, C = 1) or when write allocate is enabled,
+	@ and we have a writeable, cacheable region.  If we ignore the
+	@ U and E bits, we can allow user space to use the minicache as
+	@ well.
+	@
+	@  X = (C & ~W & ~B) | (C & W & B & write_allocate)
+	@
+	eor	ip, r1, #L_PTE_CACHEABLE
+	tst	ip, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE
+#if PTE_CACHE_WRITE_ALLOCATE
+	eorne	ip, r1, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE
+	tstne	ip, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE
+#endif
+	orreq	r2, r2, #PTE_EXT_TEX(1)
+
+	@
+	@ Erratum 40: The B bit must be cleared for a user read-only
+	@ cacheable page.
+	@
+	@  B = B & ~(U & C & ~W)
+	@
+	and	ip, r1, #L_PTE_USER | L_PTE_WRITE | L_PTE_CACHEABLE
+	teq	ip, #L_PTE_USER | L_PTE_CACHEABLE
+	biceq	r2, r2, #PTE_BUFFERABLE
+
+	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
+	movne	r2, #0				@ no -> fault
+
+	str	r2, [r0]			@ hardware version
+	mov	ip, #0
+	mcr	p15, 0, r0, c7, c10, 1		@ Clean D cache line
+	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
+	mov	pc, lr
+
+
+	.ltorg
+
+	.align
+
+	__INIT
+
+	.type	__xscale_setup, #function
+__xscale_setup:
+	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I, D caches & BTB
+	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I, D TLBs
+#ifdef CONFIG_IWMMXT
+	mov	r0, #0				@ initially disallow access to CP0/CP1
+#else
+	mov	r0, #1				@ Allow access to CP0
+#endif
+	orr     r0, r0, #1 << 6			@ cp6 for IOP3xx and Bulverde
+	orr	r0, r0, #1 << 13		@ Its undefined whether this
+	mcr	p15, 0, r0, c15, c1, 0		@ affects USR or SVC modes
+	mrc	p15, 0, r0, c1, c0, 0		@ get control register
+	ldr	r5, xscale_cr1_clear
+	bic	r0, r0, r5
+	ldr	r5, xscale_cr1_set
+	orr	r0, r0, r5
+	mov	pc, lr
+	.size	__xscale_setup, . - __xscale_setup
+
+	/*
+	 *  R
+	 * .RVI ZFRS BLDP WCAM
+	 * ..11 1.01 .... .101
+	 * 
+	 */
+	.type	xscale_cr1_clear, #object
+	.type	xscale_cr1_set, #object
+xscale_cr1_clear:
+	.word	0x3b07
+xscale_cr1_set:
+	.word	0x3905
+
+	__INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ *	     come through these
+ */
+
+	.type	xscale_processor_functions, #object
+ENTRY(xscale_processor_functions)
+	.word	v5t_early_abort
+	.word	cpu_xscale_proc_init
+	.word	cpu_xscale_proc_fin
+	.word	cpu_xscale_reset
+	.word	cpu_xscale_do_idle
+	.word	cpu_xscale_dcache_clean_area
+	.word	cpu_xscale_switch_mm
+	.word	cpu_xscale_set_pte
+	.size	xscale_processor_functions, . - xscale_processor_functions
+
+	.section ".rodata"
+
+	.type	cpu_arch_name, #object
+cpu_arch_name:
+	.asciz	"armv5te"
+	.size	cpu_arch_name, . - cpu_arch_name
+
+	.type	cpu_elf_name, #object
+cpu_elf_name:
+	.asciz	"v5"
+	.size	cpu_elf_name, . - cpu_elf_name
+
+	.type	cpu_80200_name, #object
+cpu_80200_name:
+	.asciz	"XScale-80200"
+	.size	cpu_80200_name, . - cpu_80200_name
+
+	.type	cpu_8032x_name, #object
+cpu_8032x_name:
+	.asciz	"XScale-IOP8032x Family"
+	.size	cpu_8032x_name, . - cpu_8032x_name
+
+	.type	cpu_8033x_name, #object
+cpu_8033x_name:
+	.asciz	"XScale-IOP8033x Family"
+	.size	cpu_8033x_name, . - cpu_8033x_name
+
+	.type	cpu_pxa250_name, #object
+cpu_pxa250_name:
+	.asciz	"XScale-PXA250"
+	.size	cpu_pxa250_name, . - cpu_pxa250_name
+
+	.type	cpu_pxa210_name, #object
+cpu_pxa210_name:
+	.asciz	"XScale-PXA210"
+	.size	cpu_pxa210_name, . - cpu_pxa210_name
+
+	.type	cpu_ixp42x_name, #object
+cpu_ixp42x_name:
+	.asciz	"XScale-IXP42x Family"
+	.size	cpu_ixp42x_name, . - cpu_ixp42x_name
+
+	.type	cpu_ixp46x_name, #object
+cpu_ixp46x_name:
+	.asciz	"XScale-IXP46x Family"
+	.size	cpu_ixp46x_name, . - cpu_ixp46x_name
+
+	.type	cpu_ixp2400_name, #object
+cpu_ixp2400_name:
+	.asciz	"XScale-IXP2400"
+	.size	cpu_ixp2400_name, . - cpu_ixp2400_name
+
+	.type	cpu_ixp2800_name, #object
+cpu_ixp2800_name:
+	.asciz	"XScale-IXP2800"
+	.size	cpu_ixp2800_name, . - cpu_ixp2800_name
+
+	.type	cpu_pxa255_name, #object
+cpu_pxa255_name:
+	.asciz	"XScale-PXA255"
+	.size	cpu_pxa255_name, . - cpu_pxa255_name
+
+	.type	cpu_pxa270_name, #object
+cpu_pxa270_name:
+	.asciz	"XScale-PXA270"
+	.size	cpu_pxa270_name, . - cpu_pxa270_name
+
+	.align
+
+	.section ".proc.info", #alloc, #execinstr
+
+	.type	__80200_proc_info,#object
+__80200_proc_info:
+	.long	0x69052000
+	.long	0xfffffff0
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__xscale_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_80200_name
+	.long	xscale_processor_functions
+	.long	v4wbi_tlb_fns
+	.long	xscale_mc_user_fns
+	.long	xscale_cache_fns
+	.size	__80200_proc_info, . - __80200_proc_info
+
+	.type	__8032x_proc_info,#object
+__8032x_proc_info:
+	.long	0x69052420
+	.long	0xfffff5e0      @ mask should accomodate IOP80219 also
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__xscale_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_8032x_name
+	.long	xscale_processor_functions
+	.long	v4wbi_tlb_fns
+	.long	xscale_mc_user_fns
+	.long	xscale_cache_fns
+	.size	__8032x_proc_info, . - __8032x_proc_info
+
+	.type	__8033x_proc_info,#object
+__8033x_proc_info:
+	.long	0x69054010
+	.long	0xffffff30
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__xscale_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_8033x_name
+	.long	xscale_processor_functions
+	.long	v4wbi_tlb_fns
+	.long	xscale_mc_user_fns
+	.long	xscale_cache_fns
+	.size	__8033x_proc_info, . - __8033x_proc_info
+
+	.type	__pxa250_proc_info,#object
+__pxa250_proc_info:
+	.long	0x69052100
+	.long	0xfffff7f0
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__xscale_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_pxa250_name
+	.long	xscale_processor_functions
+	.long	v4wbi_tlb_fns
+	.long	xscale_mc_user_fns
+	.long	xscale_cache_fns
+	.size	__pxa250_proc_info, . - __pxa250_proc_info
+
+	.type	__pxa210_proc_info,#object
+__pxa210_proc_info:
+	.long	0x69052120
+	.long	0xfffff3f0
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__xscale_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_pxa210_name
+	.long	xscale_processor_functions
+	.long	v4wbi_tlb_fns
+	.long	xscale_mc_user_fns
+	.long	xscale_cache_fns
+	.size	__pxa210_proc_info, . - __pxa210_proc_info
+
+	.type	__ixp2400_proc_info, #object
+__ixp2400_proc_info:
+	.long   0x69054190
+	.long   0xfffffff0
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b       __xscale_setup
+	.long   cpu_arch_name
+	.long   cpu_elf_name
+	.long   HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long   cpu_ixp2400_name
+	.long   xscale_processor_functions
+	.long	v4wbi_tlb_fns
+	.long	xscale_mc_user_fns
+	.long	xscale_cache_fns
+	.size   __ixp2400_proc_info, . - __ixp2400_proc_info                
+
+	.type	__ixp2800_proc_info, #object
+__ixp2800_proc_info:
+	.long   0x690541a0
+	.long   0xfffffff0
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b       __xscale_setup
+	.long   cpu_arch_name
+	.long   cpu_elf_name
+	.long   HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long   cpu_ixp2800_name
+	.long   xscale_processor_functions
+	.long	v4wbi_tlb_fns
+	.long	xscale_mc_user_fns
+	.long	xscale_cache_fns
+	.size   __ixp2800_proc_info, . - __ixp2800_proc_info                
+
+	.type	__ixp42x_proc_info, #object
+__ixp42x_proc_info:
+	.long   0x690541c0
+	.long   0xffffffc0
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b       __xscale_setup
+	.long   cpu_arch_name
+	.long   cpu_elf_name
+	.long   HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long   cpu_ixp42x_name
+	.long   xscale_processor_functions
+	.long	v4wbi_tlb_fns
+	.long	xscale_mc_user_fns
+	.long	xscale_cache_fns
+	.size   __ixp42x_proc_info, . - __ixp42x_proc_info                
+
+	.type	__ixp46x_proc_info, #object
+__ixp46x_proc_info:
+	.long   0x69054200
+	.long   0xffffff00
+	.long   0x00000c0e
+	b       __xscale_setup
+	.long   cpu_arch_name
+	.long   cpu_elf_name
+	.long   HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long   cpu_ixp46x_name
+	.long   xscale_processor_functions
+	.long	v4wbi_tlb_fns
+	.long	xscale_mc_user_fns
+	.long	xscale_cache_fns
+	.size   __ixp46x_proc_info, . - __ixp46x_proc_info
+
+	.type	__pxa255_proc_info,#object
+__pxa255_proc_info:
+	.long	0x69052d00
+	.long	0xfffffff0
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__xscale_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_pxa255_name
+	.long	xscale_processor_functions
+	.long	v4wbi_tlb_fns
+	.long	xscale_mc_user_fns
+	.long	xscale_cache_fns
+	.size	__pxa255_proc_info, . - __pxa255_proc_info
+
+	.type	__pxa270_proc_info,#object
+__pxa270_proc_info:
+	.long	0x69054110
+	.long	0xfffffff0
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__xscale_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_pxa270_name
+	.long	xscale_processor_functions
+	.long	v4wbi_tlb_fns
+	.long	xscale_mc_user_fns
+	.long	xscale_cache_fns
+	.size	__pxa270_proc_info, . - __pxa270_proc_info
+