summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-zynq
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-04-05 15:46:37 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-04-05 15:46:37 -0700
commit2bf73dd61a84cdf27e49f48e08739af6ba70ace1 (patch)
tree225876ce1530ba6c3a96621a531f47e963fee691 /arch/arm/mach-zynq
parentd2b150d0647e055d7a71b1c33140280550b27dd6 (diff)
parent9dfbff16b422a4bac7ad309847c7bc5d65653392 (diff)
downloadop-kernel-dev-2bf73dd61a84cdf27e49f48e08739af6ba70ace1.zip
op-kernel-dev-2bf73dd61a84cdf27e49f48e08739af6ba70ace1.tar.gz
Merge tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late cleanups from Arnd Bergmann: "These could not be part of the first cleanup branch, because they either came too late in the cycle, or they have dependencies on other branches. Important changes are: - The integrator platform is almost multiplatform capable after some reorganization (Linus Walleij) - Minor cleanups on Zynq (Michal Simek) - Lots of changes for Exynos and other Samsung platforms, including further preparations for multiplatform support and the clocks bindings are rearranged" * tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) devicetree: fix newly added exynos sata bindings ARM: EXYNOS: Fix compilation error in cpuidle.c ARM: S5P64X0: Explicitly include linux/serial_s3c.h in mach/pm-core.h ARM: EXYNOS: Remove hardware.h file ARM: SAMSUNG: Remove hardware.h inclusion ARM: S3C24XX: Remove invalid code from hardware.h dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock ARM: dts: Keep some essential LDOs enabled for arndale-octa board ARM: dts: Disable MDMA1 node for arndale-octa board ARM: S3C64XX: Fix build for implicit serial_s3c.h inclusion serial: s3c: Fix build of header without serial_core.h preinclusion ARM: EXYNOS: Allow wake-up using GIC interrupts ARM: EXYNOS: Stop using legacy Samsung PM code ARM: EXYNOS: Remove PM initcalls and useless indirection ARM: EXYNOS: Fix abuse of CONFIG_PM ARM: SAMSUNG: Move s3c_pm_check_* prototypes to plat/pm-common.h ARM: SAMSUNG: Move common save/restore helpers to separate file ARM: SAMSUNG: Move Samsung PM debug code into separate file ARM: SAMSUNG: Consolidate PM debug functions ARM: SAMSUNG: Use debug_ll_addr() to get UART base address ...
Diffstat (limited to 'arch/arm/mach-zynq')
-rw-r--r--arch/arm/mach-zynq/Kconfig1
-rw-r--r--arch/arm/mach-zynq/common.c8
-rw-r--r--arch/arm/mach-zynq/common.h2
-rw-r--r--arch/arm/mach-zynq/slcr.c104
4 files changed, 98 insertions, 17 deletions
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 0e001a4..58c2b84 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -9,5 +9,6 @@ config ARCH_ZYNQ
select ICST
select CADENCE_TTC_TIMER
select ARM_GLOBAL_TIMER if !CPU_FREQ
+ select MFD_SYSCON
help
Support for Xilinx Zynq ARM Cortex A9 Platform
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index a39be8e..6fcc584 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -19,6 +19,7 @@
#include <linux/cpumask.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/clk/zynq.h>
#include <linux/clocksource.h>
#include <linux/of_address.h>
@@ -75,11 +76,16 @@ static void __init zynq_init_machine(void)
platform_device_register(&zynq_cpuidle_device);
platform_device_register_full(&devinfo);
+
+ zynq_slcr_init();
}
static void __init zynq_timer_init(void)
{
- zynq_slcr_init();
+ zynq_early_slcr_init();
+
+ zynq_clock_init();
+ of_clk_init(NULL);
clocksource_of_init();
}
diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
index c22c92c..b097844 100644
--- a/arch/arm/mach-zynq/common.h
+++ b/arch/arm/mach-zynq/common.h
@@ -20,6 +20,7 @@
void zynq_secondary_startup(void);
extern int zynq_slcr_init(void);
+extern int zynq_early_slcr_init(void);
extern void zynq_slcr_system_reset(void);
extern void zynq_slcr_cpu_stop(int cpu);
extern void zynq_slcr_cpu_start(int cpu);
@@ -33,7 +34,6 @@ extern int zynq_cpun_start(u32 address, int cpu);
extern struct smp_operations zynq_smp_ops __initdata;
#endif
-extern void __iomem *zynq_slcr_base;
extern void __iomem *zynq_scu_base;
/* Hotplug */
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
index 1836d5a..a37d49a 100644
--- a/arch/arm/mach-zynq/slcr.c
+++ b/arch/arm/mach-zynq/slcr.c
@@ -15,7 +15,9 @@
*/
#include <linux/io.h>
+#include <linux/mfd/syscon.h>
#include <linux/of_address.h>
+#include <linux/regmap.h>
#include <linux/clk/zynq.h>
#include "common.h"
@@ -29,7 +31,56 @@
#define SLCR_A9_CPU_CLKSTOP 0x10
#define SLCR_A9_CPU_RST 0x1
-void __iomem *zynq_slcr_base;
+static void __iomem *zynq_slcr_base;
+static struct regmap *zynq_slcr_regmap;
+
+/**
+ * zynq_slcr_write - Write to a register in SLCR block
+ *
+ * @val: Value to write to the register
+ * @offset: Register offset in SLCR block
+ *
+ * Return: a negative value on error, 0 on success
+ */
+static int zynq_slcr_write(u32 val, u32 offset)
+{
+ if (!zynq_slcr_regmap) {
+ writel(val, zynq_slcr_base + offset);
+ return 0;
+ }
+
+ return regmap_write(zynq_slcr_regmap, offset, val);
+}
+
+/**
+ * zynq_slcr_read - Read a register in SLCR block
+ *
+ * @val: Pointer to value to be read from SLCR
+ * @offset: Register offset in SLCR block
+ *
+ * Return: a negative value on error, 0 on success
+ */
+static int zynq_slcr_read(u32 *val, u32 offset)
+{
+ if (zynq_slcr_regmap)
+ return regmap_read(zynq_slcr_regmap, offset, val);
+
+ *val = readl(zynq_slcr_base + offset);
+
+ return 0;
+}
+
+/**
+ * zynq_slcr_unlock - Unlock SLCR registers
+ *
+ * Return: a negative value on error, 0 on success
+ */
+static inline int zynq_slcr_unlock(void)
+{
+ zynq_slcr_write(SLCR_UNLOCK_MAGIC, SLCR_UNLOCK_OFFSET);
+
+ return 0;
+}
/**
* zynq_slcr_system_reset - Reset the entire system.
@@ -43,16 +94,16 @@ void zynq_slcr_system_reset(void)
* Note that this seems to require raw i/o
* functions or there's a lockup?
*/
- writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK_OFFSET);
+ zynq_slcr_unlock();
/*
* Clear 0x0F000000 bits of reboot status register to workaround
* the FSBL not loading the bitstream after soft-reboot
* This is a temporary solution until we know more.
*/
- reboot = readl(zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET);
- writel(reboot & 0xF0FFFFFF, zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET);
- writel(1, zynq_slcr_base + SLCR_PS_RST_CTRL_OFFSET);
+ zynq_slcr_read(&reboot, SLCR_REBOOT_STATUS_OFFSET);
+ zynq_slcr_write(reboot & 0xF0FFFFFF, SLCR_REBOOT_STATUS_OFFSET);
+ zynq_slcr_write(1, SLCR_PS_RST_CTRL_OFFSET);
}
/**
@@ -61,11 +112,13 @@ void zynq_slcr_system_reset(void)
*/
void zynq_slcr_cpu_start(int cpu)
{
- u32 reg = readl(zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+ u32 reg;
+
+ zynq_slcr_read(&reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
reg &= ~(SLCR_A9_CPU_RST << cpu);
- writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+ zynq_slcr_write(reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
reg &= ~(SLCR_A9_CPU_CLKSTOP << cpu);
- writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+ zynq_slcr_write(reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
}
/**
@@ -74,19 +127,40 @@ void zynq_slcr_cpu_start(int cpu)
*/
void zynq_slcr_cpu_stop(int cpu)
{
- u32 reg = readl(zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+ u32 reg;
+
+ zynq_slcr_read(&reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
reg |= (SLCR_A9_CPU_CLKSTOP | SLCR_A9_CPU_RST) << cpu;
- writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+ zynq_slcr_write(reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
}
/**
- * zynq_slcr_init
- * Returns 0 on success, negative errno otherwise.
+ * zynq_slcr_init - Regular slcr driver init
+ *
+ * Return: 0 on success, negative errno otherwise.
*
* Called early during boot from platform code to remap SLCR area.
*/
int __init zynq_slcr_init(void)
{
+ zynq_slcr_regmap = syscon_regmap_lookup_by_compatible("xlnx,zynq-slcr");
+ if (IS_ERR(zynq_slcr_regmap)) {
+ pr_err("%s: failed to find zynq-slcr\n", __func__);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+/**
+ * zynq_early_slcr_init - Early slcr init function
+ *
+ * Return: 0 on success, negative errno otherwise.
+ *
+ * Called very early during boot from platform code to unlock SLCR.
+ */
+int __init zynq_early_slcr_init(void)
+{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-slcr");
@@ -101,13 +175,13 @@ int __init zynq_slcr_init(void)
BUG();
}
+ np->data = (__force void *)zynq_slcr_base;
+
/* unlock the SLCR so that registers can be changed */
- writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK_OFFSET);
+ zynq_slcr_unlock();
pr_info("%s mapped to %p\n", np->name, zynq_slcr_base);
- zynq_clock_init(zynq_slcr_base);
-
of_node_put(np);
return 0;
OpenPOWER on IntegriCloud