diff options
author | Patrice Chotard <patrice.chotard@st.com> | 2013-01-08 10:41:02 +0100 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2013-01-30 20:42:14 +0100 |
commit | 0493e6493031523f78680b4469f02fc1b2d440f3 (patch) | |
tree | 06f03b57fa707ac4423fa17749d818a710859ef3 /arch/arm/mach-ux500 | |
parent | a718ff6f9bbc13ba3677589f7fd241066554424f (diff) | |
download | op-kernel-dev-0493e6493031523f78680b4469f02fc1b2d440f3.zip op-kernel-dev-0493e6493031523f78680b4469f02fc1b2d440f3.tar.gz |
pinctrl: add abx500 pinctrl driver core
This adds the AB8500 core driver, which will be utilized by
the follow-on drivers for different ABx500 variants.
Sselect the driver from the DBX500_SOC, as this chip is
powering and clocking that SoC.
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm/mach-ux500')
-rw-r--r-- | arch/arm/mach-ux500/Kconfig | 1 | ||||
-rw-r--r-- | arch/arm/mach-ux500/board-mop500.c | 19 |
2 files changed, 2 insertions, 18 deletions
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 1d7dbe6..018bf68 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -11,6 +11,7 @@ config UX500_SOC_COMMON select COMMON_CLK select PINCTRL select PINCTRL_NOMADIK + select PINCTRL_ABX500 select PL310_ERRATA_753970 if CACHE_PL310 config UX500_SOC_DB8500 diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index d453522..b6f14ee 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -90,26 +90,9 @@ static struct platform_device snowball_gpio_en_3v3_regulator_dev = { }, }; -static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { +static struct abx500_gpio_platform_data ab8500_gpio_pdata = { .gpio_base = MOP500_AB8500_PIN_GPIO(1), .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, - /* config_reg is the initial configuration of ab8500 pins. - * The pins can be configured as GPIO or alt functions based - * on value present in GpioSel1 to GpioSel6 and AlternatFunction - * register. This is the array of 7 configuration settings. - * One has to compile time decide these settings. Below is the - * explanation of these setting - * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO - * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO - * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO - * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO - * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO - * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO - * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured - * as GPIO then this register selectes the alternate fucntions - */ - .config_reg = {0x00, 0x1E, 0x80, 0x01, - 0x7A, 0x00, 0x00}, }; /* ab8500-codec */ |