summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ux500
diff options
context:
space:
mode:
authorRobert Marklund <robert.marklund@stericsson.com>2011-06-21 09:39:13 +0200
committerLinus Walleij <linus.walleij@linaro.org>2011-06-23 12:04:56 +0200
commitc41fac8aa9cb9ca31a5b3d9ce1f3b0026b83c16d (patch)
tree5d506284e902ac22b1d4570097b97d13bbbcee15 /arch/arm/mach-ux500
parent885d0fe40fb97d7f394c24ac9c88721015f852b3 (diff)
downloadop-kernel-dev-c41fac8aa9cb9ca31a5b3d9ce1f3b0026b83c16d.zip
op-kernel-dev-c41fac8aa9cb9ca31a5b3d9ce1f3b0026b83c16d.tar.gz
mach-ux500: Add pin configuration for snowball board
This sets up a few GPIO pins and some pinmuxing on platform boot for the Snowball board. Based on work from Mathieu J. Poirier <mathieu.poirier@linaro.org>. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
Diffstat (limited to 'arch/arm/mach-ux500')
-rw-r--r--arch/arm/mach-ux500/board-mop500-pins.c43
1 files changed, 43 insertions, 0 deletions
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index fd4cf1c..7013d00 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -228,6 +228,46 @@ static pin_cfg_t mop500_pins_hrefv60[] = {
};
+static pin_cfg_t snowball_pins[] = {
+ /* SSP0, to AB8500 */
+ GPIO143_SSP0_CLK,
+ GPIO144_SSP0_FRM,
+ GPIO145_SSP0_RXD | PIN_PULL_DOWN,
+ GPIO146_SSP0_TXD,
+
+ /* MMC0: MicroSD card */
+ GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH,
+
+ /* MMC2: LAN */
+ GPIO86_SM_ADQ0,
+ GPIO87_SM_ADQ1,
+ GPIO88_SM_ADQ2,
+ GPIO89_SM_ADQ3,
+ GPIO90_SM_ADQ4,
+ GPIO91_SM_ADQ5,
+ GPIO92_SM_ADQ6,
+ GPIO93_SM_ADQ7,
+
+ GPIO94_SM_ADVn,
+ GPIO95_SM_CS0n,
+ GPIO96_SM_OEn,
+ GPIO97_SM_WEn,
+
+ GPIO128_SM_CKO,
+ GPIO130_SM_FBCLK,
+ GPIO131_SM_ADQ8,
+ GPIO132_SM_ADQ9,
+ GPIO133_SM_ADQ10,
+ GPIO134_SM_ADQ11,
+ GPIO135_SM_ADQ12,
+ GPIO136_SM_ADQ13,
+ GPIO137_SM_ADQ14,
+ GPIO138_SM_ADQ15,
+
+ /* RSTn_LAN */
+ GPIO141_GPIO | PIN_OUTPUT_HIGH,
+};
+
void __init mop500_pins_init(void)
{
nmk_config_pins(mop500_pins_common,
@@ -235,6 +275,9 @@ void __init mop500_pins_init(void)
if (machine_is_hrefv60())
nmk_config_pins(mop500_pins_hrefv60,
ARRAY_SIZE(mop500_pins_hrefv60));
+ else if (machine_is_snowball())
+ nmk_config_pins(snowball_pins,
+ ARRAY_SIZE(snowball_pins));
else
nmk_config_pins(mop500_pins_default,
ARRAY_SIZE(mop500_pins_default));
OpenPOWER on IntegriCloud