Merge v2.6.37-rc8 into powerpc/next

33 files changed, 2914 insertions, 243 deletions

diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 6625e5b..2dd44a0 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -21,9 +21,7 @@ config MACH_U8500_MOP
 	bool "U8500 Development platform"
 	select UX500_SOC_DB8500
 	help
-	  Include support for mop500 development platform
-	  based on U8500 architecture. The platform is based
-	  on early drop silicon version of 8500.
+	  Include support for the mop500 development platform.
 
 config MACH_U5500
 	bool "U5500 Development platform"
@@ -39,4 +37,18 @@ config UX500_DEBUG_UART
 	  Choose the UART on which kernel low-level debug messages should be
 	  output.
 
+config U5500_MODEM_IRQ
+	bool "Modem IRQ support"
+	depends on MACH_U5500
+	default y
+	help
+	  Add support for handling IRQ:s from modem side
+
+config U5500_MBOX
+	bool "Mailbox support"
+	depends on MACH_U5500 && U5500_MODEM_IRQ
+	default y
+	help
+	  Add support for U5500 mailbox communication with modem side
+
 endif
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 4556aea..9e27a84 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -4,8 +4,12 @@
 
 obj-y				:= clock.o cpu.o devices.o
 obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o devices-db5500.o
-obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
-obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o
+obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o prcmu.o
+obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o board-mop500-sdi.o
 obj-$(CONFIG_MACH_U5500)	+= board-u5500.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
+obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o
+obj-$(CONFIG_REGULATOR_AB8500)	+= board-mop500-regulators.o
+obj-$(CONFIG_U5500_MODEM_IRQ)	+= modem_irq.o
+obj-$(CONFIG_U5500_MBOX)	+= mbox.o
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
new file mode 100644
index 0000000..1187f1f
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ *
+ * MOP500 board specific initialization for regulators
+ */
+#include <linux/kernel.h>
+#include <linux/regulator/machine.h>
+
+/* supplies to the display/camera */
+static struct regulator_init_data ab8500_vaux1_regulator = {
+	.constraints = {
+		.name = "V-DISPLAY",
+		.min_uV = 2500000,
+		.max_uV = 2900000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
+					REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supplies to the on-board eMMC */
+static struct regulator_init_data ab8500_vaux2_regulator = {
+	.constraints = {
+		.name = "V-eMMC1",
+		.min_uV = 1100000,
+		.max_uV = 3300000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
+					REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for VAUX3, supplies to SDcard slots */
+static struct regulator_init_data ab8500_vaux3_regulator = {
+	.constraints = {
+		.name = "V-MMC-SD",
+		.min_uV = 1100000,
+		.max_uV = 3300000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
+					REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for tvout, gpadc, TVOUT LDO */
+static struct regulator_init_data ab8500_vtvout_init = {
+	.constraints = {
+		.name = "V-TVOUT",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for ab8500-vaudio, VAUDIO LDO */
+static struct regulator_init_data ab8500_vaudio_init = {
+	.constraints = {
+		.name = "V-AUD",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for v-anamic1 VAMic1-LDO */
+static struct regulator_init_data ab8500_vamic1_init = {
+	.constraints = {
+		.name = "V-AMIC1",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
+static struct regulator_init_data ab8500_vamic2_init = {
+	.constraints = {
+		.name = "V-AMIC2",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for v-dmic, VDMIC LDO */
+static struct regulator_init_data ab8500_vdmic_init = {
+	.constraints = {
+		.name = "V-DMIC",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for v-intcore12, VINTCORE12 LDO */
+static struct regulator_init_data ab8500_vintcore_init = {
+	.constraints = {
+		.name = "V-INTCORE",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for U8500 CSI/DSI, VANA LDO */
+static struct regulator_init_data ab8500_vana_init = {
+	.constraints = {
+		.name = "V-CSI/DSI",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
new file mode 100644
index 0000000..bac9956
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Hanumath Prasad <hanumath.prasad@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/mmci.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+
+#include <plat/pincfg.h>
+#include <mach/devices.h>
+#include <mach/hardware.h>
+
+#include "pins-db8500.h"
+#include "board-mop500.h"
+
+static pin_cfg_t mop500_sdi_pins[] = {
+	/* SDI4 (on-board eMMC) */
+	GPIO197_MC4_DAT3,
+	GPIO198_MC4_DAT2,
+	GPIO199_MC4_DAT1,
+	GPIO200_MC4_DAT0,
+	GPIO201_MC4_CMD,
+	GPIO202_MC4_FBCLK,
+	GPIO203_MC4_CLK,
+	GPIO204_MC4_DAT7,
+	GPIO205_MC4_DAT6,
+	GPIO206_MC4_DAT5,
+	GPIO207_MC4_DAT4,
+};
+
+static pin_cfg_t mop500_sdi2_pins[] = {
+	/* SDI2 (POP eMMC) */
+	GPIO128_MC2_CLK,
+	GPIO129_MC2_CMD,
+	GPIO130_MC2_FBCLK,
+	GPIO131_MC2_DAT0,
+	GPIO132_MC2_DAT1,
+	GPIO133_MC2_DAT2,
+	GPIO134_MC2_DAT3,
+	GPIO135_MC2_DAT4,
+	GPIO136_MC2_DAT5,
+	GPIO137_MC2_DAT6,
+	GPIO138_MC2_DAT7,
+};
+
+/*
+ * SDI 2 (POP eMMC, not on DB8500ed)
+ */
+
+static struct mmci_platform_data mop500_sdi2_data = {
+	.ocr_mask	= MMC_VDD_165_195,
+	.f_max		= 100000000,
+	.capabilities	= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+	.gpio_cd	= -1,
+	.gpio_wp	= -1,
+};
+
+/*
+ * SDI 4 (on-board eMMC)
+ */
+
+static struct mmci_platform_data mop500_sdi4_data = {
+	.ocr_mask	= MMC_VDD_29_30,
+	.f_max		= 100000000,
+	.capabilities	= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_MMC_HIGHSPEED,
+	.gpio_cd	= -1,
+	.gpio_wp	= -1,
+};
+
+void mop500_sdi_init(void)
+{
+	nmk_config_pins(mop500_sdi_pins, ARRAY_SIZE(mop500_sdi_pins));
+
+	u8500_sdi2_device.dev.platform_data = &mop500_sdi2_data;
+	u8500_sdi4_device.dev.platform_data = &mop500_sdi4_data;
+
+	if (!cpu_is_u8500ed()) {
+		nmk_config_pins(mop500_sdi2_pins, ARRAY_SIZE(mop500_sdi2_pins));
+		amba_device_register(&u8500_sdi2_device, &iomem_resource);
+	}
+
+	/* On-board eMMC */
+	amba_device_register(&u8500_sdi4_device, &iomem_resource);
+}
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 0e8fd13..cac83a6 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -18,18 +18,22 @@
 #include <linux/amba/pl022.h>
 #include <linux/spi/spi.h>
 #include <linux/mfd/ab8500.h>
+#include <linux/input/matrix_keypad.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <plat/pincfg.h>
 #include <plat/i2c.h>
+#include <plat/ske.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
+#include <mach/irqs.h>
 
 #include "pins-db8500.h"
+#include "board-mop500.h"
 
 static pin_cfg_t mop500_pins[] = {
 	/* SSP0 */
@@ -47,6 +51,24 @@ static pin_cfg_t mop500_pins[] = {
 	GPIO11_I2C2_SCL,
 	GPIO229_I2C3_SDA,
 	GPIO230_I2C3_SCL,
+
+	/* SKE keypad */
+	GPIO153_KP_I7,
+	GPIO154_KP_I6,
+	GPIO155_KP_I5,
+	GPIO156_KP_I4,
+	GPIO157_KP_O7,
+	GPIO158_KP_O6,
+	GPIO159_KP_O5,
+	GPIO160_KP_O4,
+	GPIO161_KP_I3,
+	GPIO162_KP_I2,
+	GPIO163_KP_I1,
+	GPIO164_KP_I0,
+	GPIO165_KP_O3,
+	GPIO166_KP_O2,
+	GPIO167_KP_O1,
+	GPIO168_KP_O0,
 };
 
 static void ab4500_spi_cs_control(u32 command)
@@ -55,19 +77,13 @@ static void ab4500_spi_cs_control(u32 command)
 }
 
 struct pl022_config_chip ab4500_chip_info = {
-	.lbm = LOOPBACK_DISABLED,
 	.com_mode = INTERRUPT_TRANSFER,
 	.iface = SSP_INTERFACE_MOTOROLA_SPI,
 	/* we can act as master only */
 	.hierarchy = SSP_MASTER,
 	.slave_tx_disable = 0,
-	.endian_rx = SSP_RX_MSB,
-	.endian_tx = SSP_TX_MSB,
-	.data_size = SSP_DATA_BITS_24,
 	.rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
 	.tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
-	.clk_phase = SSP_CLK_SECOND_EDGE,
-	.clk_pol = SSP_CLK_POL_IDLE_HIGH,
 	.cs_control = ab4500_spi_cs_control,
 };
 
@@ -75,15 +91,33 @@ static struct ab8500_platform_data ab8500_platdata = {
 	.irq_base	= MOP500_AB8500_IRQ_BASE,
 };
 
-static struct spi_board_info u8500_spi_devices[] = {
+static struct resource ab8500_resources[] = {
+	[0] = {
+		.start = IRQ_AB8500,
+		.end = IRQ_AB8500,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+struct platform_device ab8500_device = {
+	.name = "ab8500-i2c",
+	.id = 0,
+	.dev = {
+		.platform_data = &ab8500_platdata,
+	},
+	.num_resources = 1,
+	.resource = ab8500_resources,
+};
+
+static struct spi_board_info ab8500_spi_devices[] = {
 	{
-		.modalias = "ab8500",
+		.modalias = "ab8500-spi",
 		.controller_data = &ab4500_chip_info,
 		.platform_data = &ab8500_platdata,
 		.max_speed_hz = 12000000,
 		.bus_num = 0,
 		.chip_select = 0,
-		.mode = SPI_MODE_0,
+		.mode = SPI_MODE_3,
 		.irq = IRQ_DB8500_AB8500,
 	},
 };
@@ -134,12 +168,120 @@ static struct amba_device *amba_devs[] __initdata = {
 	&u8500_ssp0_device,
 };
 
+static const unsigned int ux500_keymap[] = {
+	KEY(2, 5, KEY_END),
+	KEY(4, 1, KEY_POWER),
+	KEY(3, 5, KEY_VOLUMEDOWN),
+	KEY(1, 3, KEY_3),
+	KEY(5, 2, KEY_RIGHT),
+	KEY(5, 0, KEY_9),
+
+	KEY(0, 5, KEY_MENU),
+	KEY(7, 6, KEY_ENTER),
+	KEY(4, 5, KEY_0),
+	KEY(6, 7, KEY_2),
+	KEY(3, 4, KEY_UP),
+	KEY(3, 3, KEY_DOWN),
+
+	KEY(6, 4, KEY_SEND),
+	KEY(6, 2, KEY_BACK),
+	KEY(4, 2, KEY_VOLUMEUP),
+	KEY(5, 5, KEY_1),
+	KEY(4, 3, KEY_LEFT),
+	KEY(3, 2, KEY_7),
+};
+
+static const struct matrix_keymap_data ux500_keymap_data = {
+	.keymap         = ux500_keymap,
+	.keymap_size    = ARRAY_SIZE(ux500_keymap),
+};
+
+/*
+ * Nomadik SKE keypad
+ */
+#define ROW_PIN_I0      164
+#define ROW_PIN_I1      163
+#define ROW_PIN_I2      162
+#define ROW_PIN_I3      161
+#define ROW_PIN_I4      156
+#define ROW_PIN_I5      155
+#define ROW_PIN_I6      154
+#define ROW_PIN_I7      153
+#define COL_PIN_O0      168
+#define COL_PIN_O1      167
+#define COL_PIN_O2      166
+#define COL_PIN_O3      165
+#define COL_PIN_O4      160
+#define COL_PIN_O5      159
+#define COL_PIN_O6      158
+#define COL_PIN_O7      157
+
+#define SKE_KPD_MAX_ROWS        8
+#define SKE_KPD_MAX_COLS        8
+
+static int ske_kp_rows[] = {
+	ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3,
+	ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7,
+};
+
+/*
+ * ske_set_gpio_row: request and set gpio rows
+ */
+static int ske_set_gpio_row(int gpio)
+{
+	int ret;
+
+	ret = gpio_request(gpio, "ske-kp");
+	if (ret < 0) {
+		pr_err("ske_set_gpio_row: gpio request failed\n");
+		return ret;
+	}
+
+	ret = gpio_direction_output(gpio, 1);
+	if (ret < 0) {
+		pr_err("ske_set_gpio_row: gpio direction failed\n");
+		gpio_free(gpio);
+	}
+
+	return ret;
+}
+
+/*
+ * ske_kp_init - enable the gpio configuration
+ */
+static int ske_kp_init(void)
+{
+	int ret, i;
+
+	for (i = 0; i < SKE_KPD_MAX_ROWS; i++) {
+		ret = ske_set_gpio_row(ske_kp_rows[i]);
+		if (ret < 0) {
+			pr_err("ske_kp_init: failed init\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static struct ske_keypad_platform_data ske_keypad_board = {
+	.init           = ske_kp_init,
+	.keymap_data    = &ux500_keymap_data,
+	.no_autorepeat  = true,
+	.krow           = SKE_KPD_MAX_ROWS,     /* 8x8 matrix */
+	.kcol           = SKE_KPD_MAX_COLS,
+	.debounce_ms    = 40,                   /* in millsecs */
+};
+
+
+
 /* add any platform devices here - TODO */
 static struct platform_device *platform_devs[] __initdata = {
 	&u8500_i2c0_device,
 	&ux500_i2c1_device,
 	&ux500_i2c2_device,
 	&ux500_i2c3_device,
+	&ux500_ske_keypad_device,
 };
 
 static void __init u8500_init_machine(void)
@@ -154,6 +296,7 @@ static void __init u8500_init_machine(void)
 	ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data;
 	ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data;
 	ux500_i2c3_device.dev.platform_data = &u8500_i2c3_data;
+	ux500_ske_keypad_device.dev.platform_data = &ske_keypad_board;
 
 	u8500_ssp0_device.dev.platform_data = &ssp0_platform_data;
 
@@ -163,14 +306,18 @@ static void __init u8500_init_machine(void)
 
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
-	spi_register_board_info(u8500_spi_devices,
-			ARRAY_SIZE(u8500_spi_devices));
+	mop500_sdi_init();
+
+	/* If HW is early drop (ED) or V1.0 then use SPI to access AB8500 */
+	if (cpu_is_u8500ed() || cpu_is_u8500v10())
+		spi_register_board_info(ab8500_spi_devices,
+			ARRAY_SIZE(ab8500_spi_devices));
+	else /* If HW is v.1.1 or later use I2C to access AB8500 */
+		platform_device_register(&ab8500_device);
 }
 
 MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
 	/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
-	.phys_io	= U8500_UART2_BASE,
-	.io_pg_offst	= (IO_ADDRESS(U8500_UART2_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x100,
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
new file mode 100644
index 0000000..2d24032
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __BOARD_MOP500_H
+#define __BOARD_MOP500_H
+
+extern void mop500_sdi_init(void);
+
+#endif
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 4430e69..1ca094a 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -31,8 +31,6 @@ static void __init u5500_init_machine(void)
 }
 
 MACHINE_START(U8500, "ST-Ericsson U5500 Platform")
-	.phys_io	= UX500_UART0_BASE,
-	.io_pg_offst	= (IO_ADDRESS(UX500_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= u5500_map_io,
 	.init_irq	= ux500_init_irq,
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index d8ab7f1..1675047 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -477,6 +477,7 @@ static struct clk_lookup u8500_common_clks[] = {
 	CLK(sdi5,	"sdi5",		NULL),
 	CLK(uart2,	"uart2",	NULL),
 	CLK(ske,	"ske",		NULL),
+	CLK(ske,	"nmk-ske-keypad",	NULL),
 	CLK(sdi2,	"sdi2",		NULL),
 	CLK(i2c0,	"nmk-i2c.0",	NULL),
 	CLK(fsmc,	"fsmc",		NULL),
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index e9278f6..2f87075 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -14,6 +14,7 @@
 #include <mach/hardware.h>
 #include <mach/devices.h>
 #include <mach/setup.h>
+#include <mach/irqs.h>
 
 static struct map_desc u5500_io_desc[] __initdata = {
 	__IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
@@ -24,6 +25,90 @@ static struct map_desc u5500_io_desc[] __initdata = {
 	__IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K),
 };
 
+static struct resource mbox0_resources[] = {
+	{
+		.name = "mbox_peer",
+		.start = U5500_MBOX0_PEER_START,
+		.end = U5500_MBOX0_PEER_END,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "mbox_local",
+		.start = U5500_MBOX0_LOCAL_START,
+		.end = U5500_MBOX0_LOCAL_END,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "mbox_irq",
+		.start = MBOX_PAIR0_VIRT_IRQ,
+		.end = MBOX_PAIR0_VIRT_IRQ,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct resource mbox1_resources[] = {
+	{
+		.name = "mbox_peer",
+		.start = U5500_MBOX1_PEER_START,
+		.end = U5500_MBOX1_PEER_END,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "mbox_local",
+		.start = U5500_MBOX1_LOCAL_START,
+		.end = U5500_MBOX1_LOCAL_END,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "mbox_irq",
+		.start = MBOX_PAIR1_VIRT_IRQ,
+		.end = MBOX_PAIR1_VIRT_IRQ,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct resource mbox2_resources[] = {
+	{
+		.name = "mbox_peer",
+		.start = U5500_MBOX2_PEER_START,
+		.end = U5500_MBOX2_PEER_END,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "mbox_local",
+		.start = U5500_MBOX2_LOCAL_START,
+		.end = U5500_MBOX2_LOCAL_END,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "mbox_irq",
+		.start = MBOX_PAIR2_VIRT_IRQ,
+		.end = MBOX_PAIR2_VIRT_IRQ,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device mbox0_device = {
+	.id = 0,
+	.name = "mbox",
+	.resource = mbox0_resources,
+	.num_resources = ARRAY_SIZE(mbox0_resources),
+};
+
+static struct platform_device mbox1_device = {
+	.id = 1,
+	.name = "mbox",
+	.resource = mbox1_resources,
+	.num_resources = ARRAY_SIZE(mbox1_resources),
+};
+
+static struct platform_device mbox2_device = {
+	.id = 2,
+	.name = "mbox",
+	.resource = mbox2_resources,
+	.num_resources = ARRAY_SIZE(mbox2_resources),
+};
+
 static struct platform_device *u5500_platform_devs[] __initdata = {
 	&u5500_gpio_devs[0],
 	&u5500_gpio_devs[1],
@@ -33,6 +118,9 @@ static struct platform_device *u5500_platform_devs[] __initdata = {
 	&u5500_gpio_devs[5],
 	&u5500_gpio_devs[6],
 	&u5500_gpio_devs[7],
+	&mbox0_device,
+	&mbox1_device,
+	&mbox2_device,
 };
 
 void __init u5500_map_io(void)
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index f21c444..4acab75 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -38,10 +38,12 @@ static struct platform_device *platform_devs[] __initdata = {
 /* minimum static i/o mapping required to boot U8500 platforms */
 static struct map_desc u8500_io_desc[] __initdata = {
 	__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
+	__MEM_DEV_DESC(U8500_BOOT_ROM_BASE, SZ_1M),
 };
 
 static struct map_desc u8500ed_io_desc[] __initdata = {
@@ -53,6 +55,69 @@ static struct map_desc u8500v1_io_desc[] __initdata = {
 	__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
 };
 
+/*
+ * Functions to differentiate between later ASICs
+ * We look into the end of the ROM to locate the hardcoded ASIC ID.
+ * This is only needed to differentiate between minor revisions and
+ * process variants of an ASIC, the major revisions are encoded in
+ * the cpuid.
+ */
+#define U8500_ASIC_ID_LOC_ED_V1	(U8500_BOOT_ROM_BASE + 0x1FFF4)
+#define U8500_ASIC_ID_LOC_V2	(U8500_BOOT_ROM_BASE + 0x1DBF4)
+#define U8500_ASIC_REV_ED	0x01
+#define U8500_ASIC_REV_V10	0xA0
+#define U8500_ASIC_REV_V11	0xA1
+#define U8500_ASIC_REV_V20	0xB0
+
+/**
+ * struct db8500_asic_id - fields of the ASIC ID
+ * @process: the manufacturing process, 0x40 is 40 nm
+ *  0x00 is "standard"
+ * @partnumber: hithereto 0x8500 for DB8500
+ * @revision: version code in the series
+ * This field definion is not formally defined but makes
+ * sense.
+ */
+struct db8500_asic_id {
+	u8 process;
+	u16 partnumber;
+	u8 revision;
+};
+
+/* This isn't going to change at runtime */
+static struct db8500_asic_id db8500_id;
+
+static void __init get_db8500_asic_id(void)
+{
+	u32 asicid;
+
+	if (cpu_is_u8500v1() || cpu_is_u8500ed())
+		asicid = readl(__io_address(U8500_ASIC_ID_LOC_ED_V1));
+	else if (cpu_is_u8500v2())
+		asicid = readl(__io_address(U8500_ASIC_ID_LOC_V2));
+	else
+		BUG();
+
+	db8500_id.process = (asicid >> 24);
+	db8500_id.partnumber = (asicid >> 16) & 0xFFFFU;
+	db8500_id.revision = asicid & 0xFFU;
+}
+
+bool cpu_is_u8500v10(void)
+{
+	return (db8500_id.revision == U8500_ASIC_REV_V10);
+}
+
+bool cpu_is_u8500v11(void)
+{
+	return (db8500_id.revision == U8500_ASIC_REV_V11);
+}
+
+bool cpu_is_u8500v20(void)
+{
+	return (db8500_id.revision == U8500_ASIC_REV_V20);
+}
+
 void __init u8500_map_io(void)
 {
 	ux500_map_io();
@@ -63,6 +128,9 @@ void __init u8500_map_io(void)
 		iotable_init(u8500ed_io_desc, ARRAY_SIZE(u8500ed_io_desc));
 	else
 		iotable_init(u8500v1_io_desc, ARRAY_SIZE(u8500v1_io_desc));
+
+	/* Read out the ASIC ID as early as we can */
+	get_db8500_asic_id();
 }
 
 /*
@@ -70,6 +138,20 @@ void __init u8500_map_io(void)
  */
 void __init u8500_init_devices(void)
 {
+	/* Display some ASIC boilerplate */
+	pr_info("DB8500: process: %02x, revision ID: 0x%02x\n",
+		db8500_id.process, db8500_id.revision);
+	if (cpu_is_u8500ed())
+		pr_info("DB8500: Early Drop (ED)\n");
+	else if (cpu_is_u8500v10())
+		pr_info("DB8500: version 1.0\n");
+	else if (cpu_is_u8500v11())
+		pr_info("DB8500: version 1.1\n");
+	else if (cpu_is_u8500v20())
+		pr_info("DB8500: version 2.0\n");
+	else
+		pr_warning("ASIC: UNKNOWN SILICON VERSION!\n");
+
 	ux500_init_devices();
 
 	if (cpu_is_u8500ed())
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index e0fd747..608a137 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -10,6 +10,7 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 
+#include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
@@ -71,6 +72,46 @@ void __init ux500_init_irq(void)
 }
 
 #ifdef CONFIG_CACHE_L2X0
+static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
+{
+	/* wait for the operation to complete */
+	while (readl_relaxed(reg) & mask)
+		;
+}
+
+static inline void ux500_cache_sync(void)
+{
+	void __iomem *base = __io_address(UX500_L2CC_BASE);
+	writel_relaxed(0, base + L2X0_CACHE_SYNC);
+	ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
+}
+
+/*
+ * The L2 cache cannot be turned off in the non-secure world.
+ * Dummy until a secure service is in place.
+ */
+static void ux500_l2x0_disable(void)
+{
+}
+
+/*
+ * This is only called when doing a kexec, just after turning off the L2
+ * and L1 cache, and it is surrounded by a spinlock in the generic version.
+ * However, we're not really turning off the L2 cache right now and the
+ * PL310 does not support exclusive accesses (used to implement the spinlock).
+ * So, the invalidation needs to be done without the spinlock.
+ */
+static void ux500_l2x0_inv_all(void)
+{
+	void __iomem *l2x0_base = __io_address(UX500_L2CC_BASE);
+	uint32_t l2x0_way_mask = (1<<16) - 1;	/* Bitmask of active ways */
+
+	/* invalidate all ways */
+	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
+	ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
+	ux500_cache_sync();
+}
+
 static int ux500_l2x0_init(void)
 {
 	void __iomem *l2x0_base;
@@ -80,6 +121,10 @@ static int ux500_l2x0_init(void)
 	/* 64KB way size, 8 way associativity, force WA */
 	l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
 
+	/* Override invalidate function */
+	outer_cache.disable = ux500_l2x0_disable;
+	outer_cache.inv_all = ux500_l2x0_inv_all;
+
 	return 0;
 }
 early_initcall(ux500_l2x0_init);
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 9280d25..4a94be3 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -110,6 +110,82 @@ struct platform_device u8500_i2c4_device = {
 	.num_resources	= ARRAY_SIZE(u8500_i2c4_resources),
 };
 
+/*
+ * SD/MMC
+ */
+
+struct amba_device u8500_sdi0_device = {
+	.dev		= {
+		.init_name = "sdi0",
+	},
+	.res		= {
+		.start	= U8500_SDI0_BASE,
+		.end	= U8500_SDI0_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= {IRQ_DB8500_SDMMC0, NO_IRQ},
+};
+
+struct amba_device u8500_sdi1_device = {
+	.dev		= {
+		.init_name = "sdi1",
+	},
+	.res		= {
+		.start	= U8500_SDI1_BASE,
+		.end	= U8500_SDI1_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= {IRQ_DB8500_SDMMC1, NO_IRQ},
+};
+
+struct amba_device u8500_sdi2_device = {
+	.dev		= {
+		.init_name = "sdi2",
+	},
+	.res		= {
+		.start	= U8500_SDI2_BASE,
+		.end	= U8500_SDI2_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= {IRQ_DB8500_SDMMC2, NO_IRQ},
+};
+
+struct amba_device u8500_sdi3_device = {
+	.dev		= {
+		.init_name = "sdi3",
+	},
+	.res		= {
+		.start	= U8500_SDI3_BASE,
+		.end	= U8500_SDI3_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= {IRQ_DB8500_SDMMC3, NO_IRQ},
+};
+
+struct amba_device u8500_sdi4_device = {
+	.dev		= {
+		.init_name = "sdi4",
+	},
+	.res		= {
+		.start	= U8500_SDI4_BASE,
+		.end	= U8500_SDI4_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= {IRQ_DB8500_SDMMC4, NO_IRQ},
+};
+
+struct amba_device u8500_sdi5_device = {
+	.dev		= {
+		.init_name = "sdi5",
+	},
+	.res		= {
+		.start	= U8500_SDI5_BASE,
+		.end	= U8500_SDI5_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= {IRQ_DB8500_SDMMC5, NO_IRQ},
+};
+
 static struct resource dma40_resources[] = {
 	[0] = {
 		.start = U8500_DMA_BASE,
@@ -132,35 +208,25 @@ static struct resource dma40_resources[] = {
 
 /* Default configuration for physcial memcpy */
 struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
-	.channel_type = (STEDMA40_CHANNEL_IN_PHY_MODE |
-			 STEDMA40_LOW_PRIORITY_CHANNEL |
-			 STEDMA40_PCHAN_BASIC_MODE),
+	.mode = STEDMA40_MODE_PHYSICAL,
 	.dir = STEDMA40_MEM_TO_MEM,
 
-	.src_info.endianess = STEDMA40_LITTLE_ENDIAN,
 	.src_info.data_width = STEDMA40_BYTE_WIDTH,
 	.src_info.psize = STEDMA40_PSIZE_PHY_1,
 	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
 
-	.dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
 	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
 	.dst_info.psize = STEDMA40_PSIZE_PHY_1,
 	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
 };
 /* Default configuration for logical memcpy */
 struct stedma40_chan_cfg dma40_memcpy_conf_log = {
-	.channel_type = (STEDMA40_CHANNEL_IN_LOG_MODE |
-			 STEDMA40_LOW_PRIORITY_CHANNEL |
-			 STEDMA40_LCHAN_SRC_LOG_DST_LOG |
-			 STEDMA40_NO_TIM_FOR_LINK),
 	.dir = STEDMA40_MEM_TO_MEM,
 
-	.src_info.endianess = STEDMA40_LITTLE_ENDIAN,
 	.src_info.data_width = STEDMA40_BYTE_WIDTH,
 	.src_info.psize = STEDMA40_PSIZE_LOG_1,
 	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
 
-	.dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
 	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
 	.dst_info.psize = STEDMA40_PSIZE_LOG_1,
 	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
@@ -170,30 +236,29 @@ struct stedma40_chan_cfg dma40_memcpy_conf_log = {
  * Mapping between destination event lines and physical device address.
  * The event line is tied to a device and therefor the address is constant.
  */
-static const dma_addr_t dma40_tx_map[STEDMA40_NR_DEV];
+static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV];
 
 /* Mapping between source event lines and physical device address */
-static const dma_addr_t dma40_rx_map[STEDMA40_NR_DEV];
+static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV];
 
 /* Reserved event lines for memcpy only */
 static int dma40_memcpy_event[] = {
-	STEDMA40_MEMCPY_TX_0,
-	STEDMA40_MEMCPY_TX_1,
-	STEDMA40_MEMCPY_TX_2,
-	STEDMA40_MEMCPY_TX_3,
-	STEDMA40_MEMCPY_TX_4,
-	STEDMA40_MEMCPY_TX_5,
+	DB8500_DMA_MEMCPY_TX_0,
+	DB8500_DMA_MEMCPY_TX_1,
+	DB8500_DMA_MEMCPY_TX_2,
+	DB8500_DMA_MEMCPY_TX_3,
+	DB8500_DMA_MEMCPY_TX_4,
+	DB8500_DMA_MEMCPY_TX_5,
 };
 
 static struct stedma40_platform_data dma40_plat_data = {
-	.dev_len = STEDMA40_NR_DEV,
+	.dev_len = DB8500_DMA_NR_DEV,
 	.dev_rx = dma40_rx_map,
 	.dev_tx = dma40_tx_map,
 	.memcpy = dma40_memcpy_event,
 	.memcpy_len = ARRAY_SIZE(dma40_memcpy_event),
 	.memcpy_conf_phy = &dma40_memcpy_conf_phy,
 	.memcpy_conf_log = &dma40_memcpy_conf_log,
-	.llis_per_log = 8,
 	.disabled_channels = {-1},
 };
 
@@ -216,3 +281,23 @@ void dma40_u8500ed_fixup(void)
 	dma40_resources[1].start = U8500_DMA_LCPA_BASE_ED;
 	dma40_resources[1].end = U8500_DMA_LCPA_BASE_ED + 2 * SZ_1K - 1;
 }
+
+struct resource keypad_resources[] = {
+	[0] = {
+		.start = U8500_SKE_BASE,
+		.end = U8500_SKE_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_DB8500_KB,
+		.end = IRQ_DB8500_KB,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device ux500_ske_keypad_device = {
+	.name = "nmk-ske-keypad",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(keypad_resources),
+	.resource = keypad_resources,
+};
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
new file mode 100644
index 0000000..b782a03
--- /dev/null
+++ b/arch/arm/mach-ux500/hotplug.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *	Based on ARM realview platform
+ *
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <linux/completion.h>
+
+#include <asm/cacheflush.h>
+
+extern volatile int pen_release;
+
+static DECLARE_COMPLETION(cpu_killed);
+
+static inline void platform_do_lowpower(unsigned int cpu)
+{
+	flush_cache_all();
+
+	/* we put the platform to just WFI */
+	for (;;) {
+		__asm__ __volatile__("dsb\n\t" "wfi\n\t"
+				: : : "memory");
+		if (pen_release == cpu) {
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		}
+	}
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return wait_for_completion_timeout(&cpu_killed, 5000);
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+#ifdef DEBUG
+	unsigned int this_cpu = hard_smp_processor_id();
+
+	if (cpu != this_cpu) {
+		printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
+			   this_cpu, cpu);
+		BUG();
+	}
+#endif
+
+	printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
+	complete(&cpu_killed);
+
+	/* directly enter low power state, skipping secure registers */
+	platform_do_lowpower(cpu);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * we don't allow CPU 0 to be shutdown (it is still too special
+	 * e.g. clock tick interrupts)
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h
index 545c80f..3eafc0e 100644
--- a/arch/arm/mach-ux500/include/mach/db5500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h
@@ -100,4 +100,18 @@
 #define U5500_GPIOBANK6_BASE	(U5500_GPIO4_BASE + 0x80)
 #define U5500_GPIOBANK7_BASE	(U5500_GPIO4_BASE + 0x100)
 
+#define U5500_MBOX_BASE		(U5500_MODEM_BASE + 0xFFD1000)
+#define U5500_MBOX0_PEER_START	(U5500_MBOX_BASE + 0x40)
+#define U5500_MBOX0_PEER_END	(U5500_MBOX_BASE + 0x5F)
+#define U5500_MBOX0_LOCAL_START	(U5500_MBOX_BASE + 0x60)
+#define U5500_MBOX0_LOCAL_END	(U5500_MBOX_BASE + 0x7F)
+#define U5500_MBOX1_PEER_START	(U5500_MBOX_BASE + 0x80)
+#define U5500_MBOX1_PEER_END	(U5500_MBOX_BASE + 0x9F)
+#define U5500_MBOX1_LOCAL_START	(U5500_MBOX_BASE + 0xA0)
+#define U5500_MBOX1_LOCAL_END	(U5500_MBOX_BASE + 0xBF)
+#define U5500_MBOX2_PEER_START	(U5500_MBOX_BASE + 0x00)
+#define U5500_MBOX2_PEER_END	(U5500_MBOX_BASE + 0x1F)
+#define U5500_MBOX2_LOCAL_START	(U5500_MBOX_BASE + 0x20)
+#define U5500_MBOX2_LOCAL_END	(U5500_MBOX_BASE + 0x3F)
+
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index f000218..f07d098 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -30,8 +30,6 @@
 #define U8500_ICN_BASE		0x81000000
 
 #define U8500_BOOT_ROM_BASE	0x90000000
-/* ASIC ID is at 0xff4 offset within this region */
-#define U8500_ASIC_ID_BASE	0x9001F000
 
 #define U8500_PER6_BASE		0xa03c0000
 #define U8500_PER5_BASE		0xa03e0000
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index c5203b7..be7c0f1 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -18,11 +18,9 @@
 #define UX500_UART(n)	__UX500_UART(n)
 #define UART_BASE	UX500_UART(CONFIG_UX500_DEBUG_UART)
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =UART_BASE				@ no, physical address
-	ldrne	\rx, =IO_ADDRESS(UART_BASE)		@ yes, virtual address
+	.macro	addruart, rp, rv
+	ldr	\rp, =UART_BASE				@ no, physical address
+	ldr	\rv, =IO_ADDRESS(UART_BASE)		@ yes, virtual address
 	.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h
index c2b2f25..b91a4d1 100644
--- a/arch/arm/mach-ux500/include/mach/devices.h
+++ b/arch/arm/mach-ux500/include/mach/devices.h
@@ -26,6 +26,14 @@ extern struct platform_device ux500_i2c3_device;
 extern struct platform_device u8500_i2c0_device;
 extern struct platform_device u8500_i2c4_device;
 extern struct platform_device u8500_dma40_device;
+extern struct platform_device ux500_ske_keypad_device;
+
+extern struct amba_device u8500_sdi0_device;
+extern struct amba_device u8500_sdi1_device;
+extern struct amba_device u8500_sdi2_device;
+extern struct amba_device u8500_sdi3_device;
+extern struct amba_device u8500_sdi4_device;
+extern struct amba_device u8500_sdi5_device;
 
 void dma40_u8500ed_fixup(void);
 
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 8656379..32e883a 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -104,16 +104,35 @@ static inline bool cpu_is_u8500(void)
 #endif
 }
 
+#define CPUID_DB8500ED	0x410fc090
+#define CPUID_DB8500V1	0x411fc091
+#define CPUID_DB8500V2	0x412fc091
+
 static inline bool cpu_is_u8500ed(void)
 {
-	return cpu_is_u8500() && (read_cpuid_id() & 15) == 0;
+	return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500ED);
 }
 
 static inline bool cpu_is_u8500v1(void)
 {
-	return cpu_is_u8500() && (read_cpuid_id() & 15) == 1;
+	return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500V1);
+}
+
+static inline bool cpu_is_u8500v2(void)
+{
+	return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500V2);
 }
 
+#ifdef CONFIG_UX500_SOC_DB8500
+bool cpu_is_u8500v10(void);
+bool cpu_is_u8500v11(void);
+bool cpu_is_u8500v20(void);
+#else
+static inline bool cpu_is_u8500v10(void) { return false; }
+static inline bool cpu_is_u8500v11(void) { return false; }
+static inline bool cpu_is_u8500v20(void) { return false; }
+#endif
+
 static inline bool cpu_is_u5500(void)
 {
 #ifdef CONFIG_UX500_SOC_DB5500
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
index 6fbfe5e..bfa123d 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-db5500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
@@ -61,6 +61,7 @@
 #define IRQ_DB5500_SDMMC0		(IRQ_SHPI_START + 60)
 #define IRQ_DB5500_HSEM			(IRQ_SHPI_START + 61)
 #define IRQ_DB5500_SBAG			(IRQ_SHPI_START + 63)
+#define IRQ_DB5500_MODEM		(IRQ_SHPI_START + 65)
 #define IRQ_DB5500_SPI1			(IRQ_SHPI_START + 96)
 #define IRQ_DB5500_MSP2			(IRQ_SHPI_START + 98)
 #define IRQ_DB5500_SRPTIMER		(IRQ_SHPI_START + 101)
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index 10385bd..693aa57 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -40,7 +40,8 @@
 #define IRQ_HSIR_CH1_OVRRUN	(IRQ_SHPI_START + 33)
 #define IRQ_HSIR_CH2_OVRRUN	(IRQ_SHPI_START + 34)
 #define IRQ_HSIR_CH3_OVRRUN	(IRQ_SHPI_START + 35)
-#define IRQ_AB4500		(IRQ_SHPI_START + 40)
+#define IRQ_AB8500		(IRQ_SHPI_START + 40)
+#define IRQ_PRCMU               (IRQ_SHPI_START + 47)
 #define IRQ_DISP		(IRQ_SHPI_START + 48)
 #define IRQ_SiPI3		(IRQ_SHPI_START + 49)
 #define IRQ_I2C4		(IRQ_SHPI_START + 51)
@@ -83,6 +84,19 @@
 #include <mach/irqs-board-mop500.h>
 #endif
 
-#define NR_IRQS				IRQ_BOARD_END
+/*
+ * After the board specific IRQ:s we reserve a range of IRQ:s in which virtual
+ * IRQ:s representing modem IRQ:s can be allocated
+ */
+#define IRQ_MODEM_EVENTS_BASE (IRQ_BOARD_END + 1)
+#define IRQ_MODEM_EVENTS_NBR 72
+#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR)
+
+/* List of virtual IRQ:s that are allocated from the range above */
+#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43)
+#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45)
+#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41)
+
+#define NR_IRQS				IRQ_MODEM_EVENTS_END
 
 #endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ux500/include/mach/mbox.h b/arch/arm/mach-ux500/include/mach/mbox.h
new file mode 100644
index 0000000..7f9da4d
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/mbox.h
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
+ * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#ifndef __INC_STE_MBOX_H
+#define __INC_STE_MBOX_H
+
+#define MBOX_BUF_SIZE 16
+#define MBOX_NAME_SIZE 8
+
+/**
+  * mbox_recv_cb_t - Definition of the mailbox callback.
+  * @mbox_msg:	The mailbox message.
+  * @priv:	The clients private data as specified in the call to mbox_setup.
+  *
+  * This function will be called upon reception of new mailbox messages.
+  */
+typedef void mbox_recv_cb_t (u32 mbox_msg, void *priv);
+
+/**
+  * struct mbox - Mailbox instance struct
+  * @list:		Linked list head.
+  * @pdev:		Pointer to device struct.
+  * @cb:		Callback function. Will be called
+  *			when new data is received.
+  * @client_data:	Clients private data. Will be sent back
+  *			in the callback function.
+  * @virtbase_peer:	Virtual address for outgoing mailbox.
+  * @virtbase_local:	Virtual address for incoming mailbox.
+  * @buffer:		Then internal queue for outgoing messages.
+  * @name:		Name of this mailbox.
+  * @buffer_available:	Completion variable to achieve "blocking send".
+  *			This variable will be signaled when there is
+  *			internal buffer space available.
+  * @client_blocked:	To keep track if any client is currently
+  *			blocked.
+  * @lock:		Spinlock to protect this mailbox instance.
+  * @write_index:	Index in internal buffer to write to.
+  * @read_index:	Index in internal buffer to read from.
+  * @allocated:		Indicates whether this particular mailbox
+  *			id has been allocated by someone.
+  */
+struct mbox {
+	struct list_head list;
+	struct platform_device *pdev;
+	mbox_recv_cb_t *cb;
+	void *client_data;
+	void __iomem *virtbase_peer;
+	void __iomem *virtbase_local;
+	u32 buffer[MBOX_BUF_SIZE];
+	char name[MBOX_NAME_SIZE];
+	struct completion buffer_available;
+	u8 client_blocked;
+	spinlock_t lock;
+	u8 write_index;
+	u8 read_index;
+	bool allocated;
+};
+
+/**
+  * mbox_setup - Set up a mailbox and return its instance.
+  * @mbox_id:	The ID number of the mailbox. 0 or 1 for modem CPU,
+  *		2 for modem DSP.
+  * @mbox_cb:	Pointer to the callback function to be called when a new message
+  *		is received.
+  * @priv:	Client user data which will be returned in the callback.
+  *
+  * Returns a mailbox instance to be specified in subsequent calls to mbox_send.
+  */
+struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv);
+
+/**
+  * mbox_send - Send a mailbox message.
+  * @mbox:	Mailbox instance (returned by mbox_setup)
+  * @mbox_msg:	The mailbox message to send.
+  * @block:	Specifies whether this call will block until send is possible,
+  *		or return an error if the mailbox buffer is full.
+  *
+  * Returns 0 on success or a negative error code on error. -ENOMEM indicates
+  * that the internal buffer is full and you have to try again later (or
+  * specify "block" in order to block until send is possible).
+  */
+int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block);
+
+#endif /*INC_STE_MBOX_H*/
diff --git a/arch/arm/mach-ux500/include/mach/prcmu-regs.h b/arch/arm/mach-ux500/include/mach/prcmu-regs.h
new file mode 100644
index 0000000..8885f39
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/prcmu-regs.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2009 ST-Ericsson SA
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+#ifndef __MACH_PRCMU_REGS_H
+#define __MACH_PRCMU_REGS_H
+
+#include <mach/hardware.h>
+
+#define _PRCMU_BASE		IO_ADDRESS(U8500_PRCMU_BASE)
+
+#define PRCM_ARM_PLLDIVPS	(_PRCMU_BASE + 0x118)
+#define PRCM_ARM_CHGCLKREQ	(_PRCMU_BASE + 0x114)
+#define PRCM_PLLARM_ENABLE	(_PRCMU_BASE + 0x98)
+#define PRCM_ARMCLKFIX_MGT	(_PRCMU_BASE + 0x0)
+#define PRCM_A9_RESETN_CLR	(_PRCMU_BASE + 0x1f4)
+#define PRCM_A9_RESETN_SET	(_PRCMU_BASE + 0x1f0)
+#define PRCM_ARM_LS_CLAMP	(_PRCMU_BASE + 0x30c)
+#define PRCM_SRAM_A9		(_PRCMU_BASE + 0x308)
+
+/* ARM WFI Standby signal register */
+#define PRCM_ARM_WFI_STANDBY    (_PRCMU_BASE + 0x130)
+#define PRCMU_IOCR              (_PRCMU_BASE + 0x310)
+
+/* CPU mailbox registers */
+#define PRCM_MBOX_CPU_VAL	(_PRCMU_BASE + 0x0fc)
+#define PRCM_MBOX_CPU_SET	(_PRCMU_BASE + 0x100)
+#define PRCM_MBOX_CPU_CLR	(_PRCMU_BASE + 0x104)
+
+/* Dual A9 core interrupt management unit registers */
+#define PRCM_A9_MASK_REQ	(_PRCMU_BASE + 0x328)
+#define PRCM_A9_MASK_ACK	(_PRCMU_BASE + 0x32c)
+#define PRCM_ARMITMSK31TO0	(_PRCMU_BASE + 0x11c)
+#define PRCM_ARMITMSK63TO32	(_PRCMU_BASE + 0x120)
+#define PRCM_ARMITMSK95TO64	(_PRCMU_BASE + 0x124)
+#define PRCM_ARMITMSK127TO96	(_PRCMU_BASE + 0x128)
+#define PRCM_POWER_STATE_VAL	(_PRCMU_BASE + 0x25C)
+#define PRCM_ARMITVAL31TO0	(_PRCMU_BASE + 0x260)
+#define PRCM_ARMITVAL63TO32	(_PRCMU_BASE + 0x264)
+#define PRCM_ARMITVAL95TO64	(_PRCMU_BASE + 0x268)
+#define PRCM_ARMITVAL127TO96	(_PRCMU_BASE + 0x26C)
+
+#define PRCM_HOSTACCESS_REQ	(_PRCMU_BASE + 0x334)
+#define ARM_WAKEUP_MODEM	0x1
+
+#define PRCM_ARM_IT1_CLEAR	(_PRCMU_BASE + 0x48C)
+#define PRCM_ARM_IT1_VAL	(_PRCMU_BASE + 0x494)
+#define PRCM_HOLD_EVT		(_PRCMU_BASE + 0x174)
+
+#define PRCM_ITSTATUS0		(_PRCMU_BASE + 0x148)
+#define PRCM_ITSTATUS1		(_PRCMU_BASE + 0x150)
+#define PRCM_ITSTATUS2		(_PRCMU_BASE + 0x158)
+#define PRCM_ITSTATUS3		(_PRCMU_BASE + 0x160)
+#define PRCM_ITSTATUS4		(_PRCMU_BASE + 0x168)
+#define PRCM_ITSTATUS5		(_PRCMU_BASE + 0x484)
+#define PRCM_ITCLEAR5		(_PRCMU_BASE + 0x488)
+#define PRCM_ARMIT_MASKXP70_IT	(_PRCMU_BASE + 0x1018)
+
+/* System reset register */
+#define PRCM_APE_SOFTRST	(_PRCMU_BASE + 0x228)
+
+/* Level shifter and clamp control registers */
+#define PRCM_MMIP_LS_CLAMP_SET     (_PRCMU_BASE + 0x420)
+#define PRCM_MMIP_LS_CLAMP_CLR     (_PRCMU_BASE + 0x424)
+
+/* PRCMU clock/PLL/reset registers */
+#define PRCM_PLLDSI_FREQ           (_PRCMU_BASE + 0x500)
+#define PRCM_PLLDSI_ENABLE         (_PRCMU_BASE + 0x504)
+#define PRCM_LCDCLK_MGT            (_PRCMU_BASE + 0x044)
+#define PRCM_MCDECLK_MGT           (_PRCMU_BASE + 0x064)
+#define PRCM_HDMICLK_MGT           (_PRCMU_BASE + 0x058)
+#define PRCM_TVCLK_MGT             (_PRCMU_BASE + 0x07c)
+#define PRCM_DSI_PLLOUT_SEL        (_PRCMU_BASE + 0x530)
+#define PRCM_DSITVCLK_DIV          (_PRCMU_BASE + 0x52C)
+#define PRCM_APE_RESETN_SET        (_PRCMU_BASE + 0x1E4)
+#define PRCM_APE_RESETN_CLR        (_PRCMU_BASE + 0x1E8)
+
+/* ePOD and memory power signal control registers */
+#define PRCM_EPOD_C_SET            (_PRCMU_BASE + 0x410)
+#define PRCM_SRAM_LS_SLEEP         (_PRCMU_BASE + 0x304)
+
+/* Debug power control unit registers */
+#define PRCM_POWER_STATE_SET       (_PRCMU_BASE + 0x254)
+
+/* Miscellaneous unit registers */
+#define PRCM_DSI_SW_RESET          (_PRCMU_BASE + 0x324)
+
+#endif /* __MACH_PRCMU__REGS_H */
diff --git a/arch/arm/mach-ux500/include/mach/prcmu.h b/arch/arm/mach-ux500/include/mach/prcmu.h
new file mode 100644
index 0000000..549843f
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/prcmu.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * PRCMU f/w APIs
+ */
+#ifndef __MACH_PRCMU_H
+#define __MACH_PRCMU_H
+
+int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
+int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+
+#endif /* __MACH_PRCMU_H */
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index e978dbd..54bbe64 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -38,4 +38,11 @@ extern struct sys_timer ux500_timer;
 	.type		= MT_DEVICE,		\
 }
 
+#define __MEM_DEV_DESC(x, sz)	{		\
+	.virtual	= IO_ADDRESS(x),	\
+	.pfn		= __phys_to_pfn(x),	\
+	.length		= sz,			\
+	.type		= MT_MEMORY,		\
+}
+
 #endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h
index b59f7bc..197e841 100644
--- a/arch/arm/mach-ux500/include/mach/smp.h
+++ b/arch/arm/mach-ux500/include/mach/smp.h
@@ -10,18 +10,11 @@
 #define ASMARM_ARCH_SMP_H
 
 #include <asm/hardware/gic.h>
+#include <asm/smp_mpidr.h>
 
 /* This is required to wakeup the secondary core */
 extern void u8500_secondary_startup(void);
 
-#define hard_smp_processor_id()				\
-	({						\
-		unsigned int cpunum;			\
-		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
-			: "=r" (cpunum));		\
-		cpunum &= 0x0F;				\
-	})
-
 /*
  * We use IRQ1 as the IPI
  */
diff --git a/arch/arm/mach-ux500/mbox.c b/arch/arm/mach-ux500/mbox.c
new file mode 100644
index 0000000..6343538
--- /dev/null
+++ b/arch/arm/mach-ux500/mbox.c
@@ -0,0 +1,567 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
+ * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+/*
+ * Mailbox nomenclature:
+ *
+ *       APE           MODEM
+ *           mbox pairX
+ *   ..........................
+ *   .                       .
+ *   .           peer        .
+ *   .     send  ----        .
+ *   .      -->  |  |        .
+ *   .           |  |        .
+ *   .           ----        .
+ *   .                       .
+ *   .           local       .
+ *   .     rec   ----        .
+ *   .           |  | <--    .
+ *   .           |  |        .
+ *   .           ----        .
+ *   .........................
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/completion.h>
+#include <mach/mbox.h>
+
+#define MBOX_NAME "mbox"
+
+#define MBOX_FIFO_DATA        0x000
+#define MBOX_FIFO_ADD         0x004
+#define MBOX_FIFO_REMOVE      0x008
+#define MBOX_FIFO_THRES_FREE  0x00C
+#define MBOX_FIFO_THRES_OCCUP 0x010
+#define MBOX_FIFO_STATUS      0x014
+
+#define MBOX_DISABLE_IRQ 0x4
+#define MBOX_ENABLE_IRQ  0x0
+#define MBOX_LATCH 1
+
+/* Global list of all mailboxes */
+static struct list_head mboxs = LIST_HEAD_INIT(mboxs);
+
+static struct mbox *get_mbox_with_id(u8 id)
+{
+	u8 i;
+	struct list_head *pos = &mboxs;
+	for (i = 0; i <= id; i++)
+		pos = pos->next;
+
+	return (struct mbox *) list_entry(pos, struct mbox, list);
+}
+
+int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block)
+{
+	int res = 0;
+
+	spin_lock(&mbox->lock);
+
+	dev_dbg(&(mbox->pdev->dev),
+		"About to buffer 0x%X to mailbox 0x%X."
+		" ri = %d, wi = %d\n",
+		mbox_msg, (u32)mbox, mbox->read_index,
+		mbox->write_index);
+
+	/* Check if write buffer is full */
+	while (((mbox->write_index + 1) % MBOX_BUF_SIZE) == mbox->read_index) {
+		if (!block) {
+			dev_dbg(&(mbox->pdev->dev),
+			"Buffer full in non-blocking call! "
+			"Returning -ENOMEM!\n");
+			res = -ENOMEM;
+			goto exit;
+		}
+		spin_unlock(&mbox->lock);
+		dev_dbg(&(mbox->pdev->dev),
+			"Buffer full in blocking call! Sleeping...\n");
+		mbox->client_blocked = 1;
+		wait_for_completion(&mbox->buffer_available);
+		dev_dbg(&(mbox->pdev->dev),
+			"Blocking send was woken up! Trying again...\n");
+		spin_lock(&mbox->lock);
+	}
+
+	mbox->buffer[mbox->write_index] = mbox_msg;
+	mbox->write_index = (mbox->write_index + 1) % MBOX_BUF_SIZE;
+
+	/*
+	 * Indicate that we want an IRQ as soon as there is a slot
+	 * in the FIFO
+	 */
+	writel(MBOX_ENABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
+
+exit:
+	spin_unlock(&mbox->lock);
+	return res;
+}
+EXPORT_SYMBOL(mbox_send);
+
+#if defined(CONFIG_DEBUG_FS)
+/*
+ * Expected input: <value> <nbr sends>
+ * Example: "echo 0xdeadbeef 4 > mbox-node" sends 0xdeadbeef 4 times
+ */
+static ssize_t mbox_write_fifo(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf,
+			       size_t count)
+{
+	unsigned long mbox_mess;
+	unsigned long nbr_sends;
+	unsigned long i;
+	char int_buf[16];
+	char *token;
+	char *val;
+
+	struct mbox *mbox = (struct mbox *) dev->platform_data;
+
+	strncpy((char *) &int_buf, buf, sizeof(int_buf));
+	token = (char *) &int_buf;
+
+	/* Parse message */
+	val = strsep(&token, " ");
+	if ((val == NULL) || (strict_strtoul(val, 16, &mbox_mess) != 0))
+		mbox_mess = 0xDEADBEEF;
+
+	val = strsep(&token, " ");
+	if ((val == NULL) || (strict_strtoul(val, 10, &nbr_sends) != 0))
+		nbr_sends = 1;
+
+	dev_dbg(dev, "Will write 0x%lX %ld times using data struct at 0x%X\n",
+		mbox_mess, nbr_sends, (u32) mbox);
+
+	for (i = 0; i < nbr_sends; i++)
+		mbox_send(mbox, mbox_mess, true);
+
+	return count;
+}
+
+static ssize_t mbox_read_fifo(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	int mbox_value;
+	struct mbox *mbox = (struct mbox *) dev->platform_data;
+
+	if ((readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7) <= 0)
+		return sprintf(buf, "Mailbox is empty\n");
+
+	mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA);
+	writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE));
+
+	return sprintf(buf, "0x%X\n", mbox_value);
+}
+
+static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
+
+static int mbox_show(struct seq_file *s, void *data)
+{
+	struct list_head *pos;
+	u8 mbox_index = 0;
+
+	list_for_each(pos, &mboxs) {
+		struct mbox *m =
+			(struct mbox *) list_entry(pos, struct mbox, list);
+		if (m == NULL) {
+			seq_printf(s,
+				   "Unable to retrieve mailbox %d\n",
+				   mbox_index);
+			continue;
+		}
+
+		spin_lock(&m->lock);
+		if ((m->virtbase_peer == NULL) || (m->virtbase_local == NULL)) {
+			seq_printf(s, "MAILBOX %d not setup or corrupt\n",
+				   mbox_index);
+			spin_unlock(&m->lock);
+			continue;
+		}
+
+		seq_printf(s,
+		"===========================\n"
+		" MAILBOX %d\n"
+		" PEER MAILBOX DUMP\n"
+		"---------------------------\n"
+		"FIFO:                 0x%X (%d)\n"
+		"Free     Threshold:   0x%.2X (%d)\n"
+		"Occupied Threshold:   0x%.2X (%d)\n"
+		"Status:               0x%.2X (%d)\n"
+		"   Free spaces  (ot):    %d (%d)\n"
+		"   Occup spaces (ot):    %d (%d)\n"
+		"===========================\n"
+		" LOCAL MAILBOX DUMP\n"
+		"---------------------------\n"
+		"FIFO:                 0x%.X (%d)\n"
+		"Free     Threshold:   0x%.2X (%d)\n"
+		"Occupied Threshold:   0x%.2X (%d)\n"
+		"Status:               0x%.2X (%d)\n"
+		"   Free spaces  (ot):    %d (%d)\n"
+		"   Occup spaces (ot):    %d (%d)\n"
+		"===========================\n"
+		"write_index: %d\n"
+		"read_index : %d\n"
+		"===========================\n"
+		"\n",
+		mbox_index,
+		readl(m->virtbase_peer + MBOX_FIFO_DATA),
+		readl(m->virtbase_peer + MBOX_FIFO_DATA),
+		readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE),
+		readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE),
+		readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP),
+		readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP),
+		readl(m->virtbase_peer + MBOX_FIFO_STATUS),
+		readl(m->virtbase_peer + MBOX_FIFO_STATUS),
+		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 4) & 0x7,
+		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 7) & 0x1,
+		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 0) & 0x7,
+		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 3) & 0x1,
+		readl(m->virtbase_local + MBOX_FIFO_DATA),
+		readl(m->virtbase_local + MBOX_FIFO_DATA),
+		readl(m->virtbase_local + MBOX_FIFO_THRES_FREE),
+		readl(m->virtbase_local + MBOX_FIFO_THRES_FREE),
+		readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP),
+		readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP),
+		readl(m->virtbase_local + MBOX_FIFO_STATUS),
+		readl(m->virtbase_local + MBOX_FIFO_STATUS),
+		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 4) & 0x7,
+		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 7) & 0x1,
+		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 0) & 0x7,
+		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 3) & 0x1,
+		m->write_index, m->read_index);
+		mbox_index++;
+		spin_unlock(&m->lock);
+	}
+
+	return 0;
+}
+
+static int mbox_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mbox_show, NULL);
+}
+
+static const struct file_operations mbox_operations = {
+	.owner = THIS_MODULE,
+	.open = mbox_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+#endif
+
+static irqreturn_t mbox_irq(int irq, void *arg)
+{
+	u32 mbox_value;
+	int nbr_occup;
+	int nbr_free;
+	struct mbox *mbox = (struct mbox *) arg;
+
+	spin_lock(&mbox->lock);
+
+	dev_dbg(&(mbox->pdev->dev),
+		"mbox IRQ [%d] received. ri = %d, wi = %d\n",
+		irq, mbox->read_index, mbox->write_index);
+
+	/*
+	 * Check if we have any outgoing messages, and if there is space for
+	 * them in the FIFO.
+	 */
+	if (mbox->read_index != mbox->write_index) {
+		/*
+		 * Check by reading FREE for LOCAL since that indicates
+		 * OCCUP for PEER
+		 */
+		nbr_free = (readl(mbox->virtbase_local + MBOX_FIFO_STATUS)
+			    >> 4) & 0x7;
+		dev_dbg(&(mbox->pdev->dev),
+			"Status indicates %d empty spaces in the FIFO!\n",
+			nbr_free);
+
+		while ((nbr_free > 0) &&
+		       (mbox->read_index != mbox->write_index)) {
+			/* Write the message and latch it into the FIFO */
+			writel(mbox->buffer[mbox->read_index],
+			       (mbox->virtbase_peer + MBOX_FIFO_DATA));
+			writel(MBOX_LATCH,
+			       (mbox->virtbase_peer + MBOX_FIFO_ADD));
+			dev_dbg(&(mbox->pdev->dev),
+				"Wrote message 0x%X to addr 0x%X\n",
+				mbox->buffer[mbox->read_index],
+				(u32) (mbox->virtbase_peer + MBOX_FIFO_DATA));
+
+			nbr_free--;
+			mbox->read_index =
+				(mbox->read_index + 1) % MBOX_BUF_SIZE;
+		}
+
+		/*
+		 * Check if we still want IRQ:s when there is free
+		 * space to send
+		 */
+		if (mbox->read_index != mbox->write_index) {
+			dev_dbg(&(mbox->pdev->dev),
+				"Still have messages to send, but FIFO full. "
+				"Request IRQ again!\n");
+			writel(MBOX_ENABLE_IRQ,
+			       mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
+		} else {
+			dev_dbg(&(mbox->pdev->dev),
+				"No more messages to send. "
+				"Do not request IRQ again!\n");
+			writel(MBOX_DISABLE_IRQ,
+			       mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
+		}
+
+		/*
+		 * Check if we can signal any blocked clients that it is OK to
+		 * start buffering again
+		 */
+		if (mbox->client_blocked &&
+		    (((mbox->write_index + 1) % MBOX_BUF_SIZE)
+		     != mbox->read_index)) {
+			dev_dbg(&(mbox->pdev->dev),
+				"Waking up blocked client\n");
+			complete(&mbox->buffer_available);
+			mbox->client_blocked = 0;
+		}
+	}
+
+	/* Check if we have any incoming messages */
+	nbr_occup = readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7;
+	if (nbr_occup == 0)
+		goto exit;
+
+	if (mbox->cb == NULL) {
+		dev_dbg(&(mbox->pdev->dev), "No receive callback registered, "
+			"leaving %d incoming messages in fifo!\n", nbr_occup);
+		goto exit;
+	}
+
+	/* Read and acknowledge the message */
+	mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA);
+	writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE));
+
+	/* Notify consumer of new mailbox message */
+	dev_dbg(&(mbox->pdev->dev), "Calling callback for message 0x%X!\n",
+		mbox_value);
+	mbox->cb(mbox_value, mbox->client_data);
+
+exit:
+	dev_dbg(&(mbox->pdev->dev), "Exit mbox IRQ. ri = %d, wi = %d\n",
+		mbox->read_index, mbox->write_index);
+	spin_unlock(&mbox->lock);
+
+	return IRQ_HANDLED;
+}
+
+/* Setup is executed once for each mbox pair */
+struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv)
+{
+	struct resource *resource;
+	int irq;
+	int res;
+	struct mbox *mbox;
+
+	mbox = get_mbox_with_id(mbox_id);
+	if (mbox == NULL) {
+		dev_err(&(mbox->pdev->dev), "Incorrect mailbox id: %d!\n",
+			mbox_id);
+		goto exit;
+	}
+
+	/*
+	 * Check if mailbox has been allocated to someone else,
+	 * otherwise allocate it
+	 */
+	if (mbox->allocated) {
+		dev_err(&(mbox->pdev->dev), "Mailbox number %d is busy!\n",
+			mbox_id);
+		mbox = NULL;
+		goto exit;
+	}
+	mbox->allocated = true;
+
+	dev_dbg(&(mbox->pdev->dev), "Initiating mailbox number %d: 0x%X...\n",
+		mbox_id, (u32)mbox);
+
+	mbox->client_data = priv;
+	mbox->cb = mbox_cb;
+
+	/* Get addr for peer mailbox and ioremap it */
+	resource = platform_get_resource_byname(mbox->pdev,
+						IORESOURCE_MEM,
+						"mbox_peer");
+	if (resource == NULL) {
+		dev_err(&(mbox->pdev->dev),
+			"Unable to retrieve mbox peer resource\n");
+		mbox = NULL;
+		goto exit;
+	}
+	dev_dbg(&(mbox->pdev->dev),
+		"Resource name: %s start: 0x%X, end: 0x%X\n",
+		resource->name, resource->start, resource->end);
+	mbox->virtbase_peer =
+		ioremap(resource->start, resource->end - resource->start);
+	if (!mbox->virtbase_peer) {
+		dev_err(&(mbox->pdev->dev), "Unable to ioremap peer mbox\n");
+		mbox = NULL;
+		goto exit;
+	}
+	dev_dbg(&(mbox->pdev->dev),
+		"ioremapped peer physical: (0x%X-0x%X) to virtual: 0x%X\n",
+		resource->start, resource->end, (u32) mbox->virtbase_peer);
+
+	/* Get addr for local mailbox and ioremap it */
+	resource = platform_get_resource_byname(mbox->pdev,
+						IORESOURCE_MEM,
+						"mbox_local");
+	if (resource == NULL) {
+		dev_err(&(mbox->pdev->dev),
+			"Unable to retrieve mbox local resource\n");
+		mbox = NULL;
+		goto exit;
+	}
+	dev_dbg(&(mbox->pdev->dev),
+		"Resource name: %s start: 0x%X, end: 0x%X\n",
+		resource->name, resource->start, resource->end);
+	mbox->virtbase_local =
+		ioremap(resource->start, resource->end - resource->start);
+	if (!mbox->virtbase_local) {
+		dev_err(&(mbox->pdev->dev), "Unable to ioremap local mbox\n");
+		mbox = NULL;
+		goto exit;
+	}
+	dev_dbg(&(mbox->pdev->dev),
+		"ioremapped local physical: (0x%X-0x%X) to virtual: 0x%X\n",
+		resource->start, resource->end, (u32) mbox->virtbase_peer);
+
+	init_completion(&mbox->buffer_available);
+	mbox->client_blocked = 0;
+
+	/* Get IRQ for mailbox and allocate it */
+	irq = platform_get_irq_byname(mbox->pdev, "mbox_irq");
+	if (irq < 0) {
+		dev_err(&(mbox->pdev->dev),
+			"Unable to retrieve mbox irq resource\n");
+		mbox = NULL;
+		goto exit;
+	}
+
+	dev_dbg(&(mbox->pdev->dev), "Allocating irq %d...\n", irq);
+	res = request_irq(irq, mbox_irq, 0, mbox->name, (void *) mbox);
+	if (res < 0) {
+		dev_err(&(mbox->pdev->dev),
+			"Unable to allocate mbox irq %d\n", irq);
+		mbox = NULL;
+		goto exit;
+	}
+
+	/* Set up mailbox to not launch IRQ on free space in mailbox */
+	writel(MBOX_DISABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
+
+	/*
+	 * Set up mailbox to launch IRQ on new message if we have
+	 * a callback set. If not, do not raise IRQ, but keep message
+	 * in FIFO for manual retrieval
+	 */
+	if (mbox_cb != NULL)
+		writel(MBOX_ENABLE_IRQ,
+		       mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP);
+	else
+		writel(MBOX_DISABLE_IRQ,
+		       mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP);
+
+#if defined(CONFIG_DEBUG_FS)
+	res = device_create_file(&(mbox->pdev->dev), &dev_attr_fifo);
+	if (res != 0)
+		dev_warn(&(mbox->pdev->dev),
+			 "Unable to create mbox sysfs entry");
+
+	(void) debugfs_create_file("mbox", S_IFREG | S_IRUGO, NULL,
+				   NULL, &mbox_operations);
+#endif
+
+	dev_info(&(mbox->pdev->dev),
+		 "Mailbox driver with index %d initated!\n", mbox_id);
+
+exit:
+	return mbox;
+}
+EXPORT_SYMBOL(mbox_setup);
+
+
+int __init mbox_probe(struct platform_device *pdev)
+{
+	struct mbox local_mbox;
+	struct mbox *mbox;
+	int res = 0;
+	dev_dbg(&(pdev->dev), "Probing mailbox (pdev = 0x%X)...\n", (u32) pdev);
+
+	memset(&local_mbox, 0x0, sizeof(struct mbox));
+
+	/* Associate our mbox data with the platform device */
+	res = platform_device_add_data(pdev,
+				       (void *) &local_mbox,
+				       sizeof(struct mbox));
+	if (res != 0) {
+		dev_err(&(pdev->dev),
+			"Unable to allocate driver platform data!\n");
+		goto exit;
+	}
+
+	mbox = (struct mbox *) pdev->dev.platform_data;
+	mbox->pdev = pdev;
+	mbox->write_index = 0;
+	mbox->read_index = 0;
+
+	INIT_LIST_HEAD(&(mbox->list));
+	list_add_tail(&(mbox->list), &mboxs);
+
+	sprintf(mbox->name, "%s", MBOX_NAME);
+	spin_lock_init(&mbox->lock);
+
+	dev_info(&(pdev->dev), "Mailbox driver loaded\n");
+
+exit:
+	return res;
+}
+
+static struct platform_driver mbox_driver = {
+	.driver = {
+		.name = MBOX_NAME,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init mbox_init(void)
+{
+	return platform_driver_probe(&mbox_driver, mbox_probe);
+}
+
+module_init(mbox_init);
+
+void __exit mbox_exit(void)
+{
+	platform_driver_unregister(&mbox_driver);
+}
+
+module_exit(mbox_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MBOX driver");
diff --git a/arch/arm/mach-ux500/modem_irq.c b/arch/arm/mach-ux500/modem_irq.c
new file mode 100644
index 0000000..3187f88
--- /dev/null
+++ b/arch/arm/mach-ux500/modem_irq.c
@@ -0,0 +1,139 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
+ * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#define MODEM_INTCON_BASE_ADDR 0xBFFD3000
+#define MODEM_INTCON_SIZE 0xFFF
+
+#define DEST_IRQ41_OFFSET 0x2A4
+#define DEST_IRQ43_OFFSET 0x2AC
+#define DEST_IRQ45_OFFSET 0x2B4
+
+#define PRIO_IRQ41_OFFSET 0x6A4
+#define PRIO_IRQ43_OFFSET 0x6AC
+#define PRIO_IRQ45_OFFSET 0x6B4
+
+#define ALLOW_IRQ_OFFSET 0x104
+
+#define MODEM_INTCON_CPU_NBR 0x1
+#define MODEM_INTCON_PRIO_HIGH 0x0
+
+#define MODEM_INTCON_ALLOW_IRQ41 0x0200
+#define MODEM_INTCON_ALLOW_IRQ43 0x0800
+#define MODEM_INTCON_ALLOW_IRQ45 0x2000
+
+#define MODEM_IRQ_REG_OFFSET 0x4
+
+struct modem_irq {
+	void __iomem *modem_intcon_base;
+};
+
+
+static void setup_modem_intcon(void __iomem *modem_intcon_base)
+{
+	/* IC_DESTINATION_BASE_ARRAY - Which CPU to receive the IRQ */
+	writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ41_OFFSET);
+	writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ43_OFFSET);
+	writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ45_OFFSET);
+
+	/* IC_PRIORITY_BASE_ARRAY - IRQ priority in modem IRQ controller */
+	writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ41_OFFSET);
+	writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ43_OFFSET);
+	writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ45_OFFSET);
+
+	/* IC_ALLOW_ARRAY - IRQ enable */
+	writel(MODEM_INTCON_ALLOW_IRQ41 |
+		   MODEM_INTCON_ALLOW_IRQ43 |
+		   MODEM_INTCON_ALLOW_IRQ45,
+		   modem_intcon_base + ALLOW_IRQ_OFFSET);
+}
+
+static irqreturn_t modem_cpu_irq_handler(int irq, void *data)
+{
+	int real_irq;
+	int virt_irq;
+	struct modem_irq *mi = (struct modem_irq *)data;
+
+	/* Read modem side IRQ number from modem IRQ controller */
+	real_irq = readl(mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET) & 0xFF;
+	virt_irq = IRQ_MODEM_EVENTS_BASE + real_irq;
+
+	pr_debug("modem_irq: Worker read addr 0x%X and got value 0x%X "
+		 "which will be 0x%X (%d) which translates to "
+		 "virtual IRQ 0x%X (%d)!\n",
+		   (u32)mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET,
+		   real_irq,
+		   real_irq & 0xFF,
+		   real_irq & 0xFF,
+		   virt_irq,
+		   virt_irq);
+
+	if (virt_irq != 0)
+		generic_handle_irq(virt_irq);
+
+	pr_debug("modem_irq: Done handling virtual IRQ %d!\n", virt_irq);
+
+	return IRQ_HANDLED;
+}
+
+static void create_virtual_irq(int irq, struct irq_chip *modem_irq_chip)
+{
+	set_irq_chip(irq, modem_irq_chip);
+	set_irq_handler(irq, handle_simple_irq);
+	set_irq_flags(irq, IRQF_VALID);
+
+	pr_debug("modem_irq: Created virtual IRQ %d\n", irq);
+}
+
+static int modem_irq_init(void)
+{
+	int err;
+	static struct irq_chip  modem_irq_chip;
+	struct modem_irq *mi;
+
+	pr_info("modem_irq: Set up IRQ handler for incoming modem IRQ %d\n",
+		   IRQ_DB5500_MODEM);
+
+	mi = kmalloc(sizeof(struct modem_irq), GFP_KERNEL);
+	if (!mi) {
+		pr_err("modem_irq: Could not allocate device\n");
+		return -ENOMEM;
+	}
+
+	mi->modem_intcon_base =
+		ioremap(MODEM_INTCON_BASE_ADDR, MODEM_INTCON_SIZE);
+	pr_debug("modem_irq: ioremapped modem_intcon_base from "
+		 "phy 0x%x to virt 0x%x\n", MODEM_INTCON_BASE_ADDR,
+		 (u32)mi->modem_intcon_base);
+
+	setup_modem_intcon(mi->modem_intcon_base);
+
+	modem_irq_chip = dummy_irq_chip;
+	modem_irq_chip.name = "modem_irq";
+
+	/* Create the virtual IRQ:s needed */
+	create_virtual_irq(MBOX_PAIR0_VIRT_IRQ, &modem_irq_chip);
+	create_virtual_irq(MBOX_PAIR1_VIRT_IRQ, &modem_irq_chip);
+	create_virtual_irq(MBOX_PAIR2_VIRT_IRQ, &modem_irq_chip);
+
+	err = request_threaded_irq(IRQ_DB5500_MODEM, NULL,
+				   modem_cpu_irq_handler, IRQF_ONESHOT,
+				   "modem_irq", mi);
+	if (err)
+		pr_err("modem_irq: Could not register IRQ %d\n",
+		       IRQ_DB5500_MODEM);
+
+	return 0;
+}
+
+arch_initcall(modem_irq_init);
diff --git a/arch/arm/mach-ux500/pins-db5500.h b/arch/arm/mach-ux500/pins-db5500.h
new file mode 100644
index 0000000..bf50c21
--- /dev/null
+++ b/arch/arm/mach-ux500/pins-db5500.h
@@ -0,0 +1,620 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ */
+
+#ifndef __MACH_DB5500_PINS_H
+#define __MACH_DB5500_PINS_H
+
+#define GPIO0_GPIO		PIN_CFG(0, GPIO)
+#define GPIO0_SM_CS3n		PIN_CFG(0, ALT_A)
+
+#define GPIO1_GPIO		PIN_CFG(1, GPIO)
+#define GPIO1_SM_A3		PIN_CFG(1, ALT_A)
+
+#define GPIO2_GPIO		PIN_CFG(2, GPIO)
+#define GPIO2_SM_A4		PIN_CFG(2, ALT_A)
+#define GPIO2_SM_AVD		PIN_CFG(2, ALT_B)
+
+#define GPIO3_GPIO		PIN_CFG(3, GPIO)
+#define GPIO3_I2C1_SCL		PIN_CFG(3, ALT_A)
+
+#define GPIO4_GPIO		PIN_CFG(4, GPIO)
+#define GPIO4_I2C1_SDA		PIN_CFG(4, ALT_A)
+
+#define GPIO5_GPIO		PIN_CFG(5, GPIO)
+#define GPIO5_MC0_DAT0		PIN_CFG(5, ALT_A)
+#define GPIO5_SM_ADQ8		PIN_CFG(5, ALT_B)
+
+#define GPIO6_GPIO		PIN_CFG(6, GPIO)
+#define GPIO6_MC0_DAT1		PIN_CFG(6, ALT_A)
+#define GPIO6_SM_ADQ0		PIN_CFG(6, ALT_B)
+
+#define GPIO7_GPIO		PIN_CFG(7, GPIO)
+#define GPIO7_MC0_DAT2		PIN_CFG(7, ALT_A)
+#define GPIO7_SM_ADQ9		PIN_CFG(7, ALT_B)
+
+#define GPIO8_GPIO		PIN_CFG(8, GPIO)
+#define GPIO8_MC0_DAT3		PIN_CFG(8, ALT_A)
+#define GPIO8_SM_ADQ1		PIN_CFG(8, ALT_B)
+
+#define GPIO9_GPIO		PIN_CFG(9, GPIO)
+#define GPIO9_MC0_DAT4		PIN_CFG(9, ALT_A)
+#define GPIO9_SM_ADQ10		PIN_CFG(9, ALT_B)
+
+#define GPIO10_GPIO		PIN_CFG(10, GPIO)
+#define GPIO10_MC0_DAT5		PIN_CFG(10, ALT_A)
+#define GPIO10_SM_ADQ2		PIN_CFG(10, ALT_B)
+
+#define GPIO11_GPIO		PIN_CFG(11, GPIO)
+#define GPIO11_MC0_DAT6		PIN_CFG(11, ALT_A)
+#define GPIO11_SM_ADQ11		PIN_CFG(11, ALT_B)
+
+#define GPIO12_GPIO		PIN_CFG(12, GPIO)
+#define GPIO12_MC0_DAT7		PIN_CFG(12, ALT_A)
+#define GPIO12_SM_ADQ3		PIN_CFG(12, ALT_B)
+
+#define GPIO13_GPIO		PIN_CFG(13, GPIO)
+#define GPIO13_MC0_CMD		PIN_CFG(13, ALT_A)
+#define GPIO13_SM_BUSY0n	PIN_CFG(13, ALT_B)
+#define GPIO13_SM_WAIT0n	PIN_CFG(13, ALT_C)
+
+#define GPIO14_GPIO		PIN_CFG(14, GPIO)
+#define GPIO14_MC0_CLK		PIN_CFG(14, ALT_A)
+#define GPIO14_SM_CS1n		PIN_CFG(14, ALT_B)
+#define GPIO14_SM_CKO		PIN_CFG(14, ALT_C)
+
+#define GPIO15_GPIO		PIN_CFG(15, GPIO)
+#define GPIO15_SM_A5		PIN_CFG(15, ALT_A)
+#define GPIO15_SM_CLE		PIN_CFG(15, ALT_B)
+
+#define GPIO16_GPIO		PIN_CFG(16, GPIO)
+#define GPIO16_MC2_CMD		PIN_CFG(16, ALT_A)
+#define GPIO16_SM_OEn		PIN_CFG(16, ALT_B)
+
+#define GPIO17_GPIO		PIN_CFG(17, GPIO)
+#define GPIO17_MC2_CLK		PIN_CFG(17, ALT_A)
+#define GPIO17_SM_WEn		PIN_CFG(17, ALT_B)
+
+#define GPIO18_GPIO		PIN_CFG(18, GPIO)
+#define GPIO18_SM_A6		PIN_CFG(18, ALT_A)
+#define GPIO18_SM_ALE		PIN_CFG(18, ALT_B)
+#define GPIO18_SM_AVDn		PIN_CFG(18, ALT_C)
+
+#define GPIO19_GPIO		PIN_CFG(19, GPIO)
+#define GPIO19_MC2_DAT1		PIN_CFG(19, ALT_A)
+#define GPIO19_SM_ADQ4		PIN_CFG(19, ALT_B)
+
+#define GPIO20_GPIO		PIN_CFG(20, GPIO)
+#define GPIO20_MC2_DAT3		PIN_CFG(20, ALT_A)
+#define GPIO20_SM_ADQ5		PIN_CFG(20, ALT_B)
+
+#define GPIO21_GPIO		PIN_CFG(21, GPIO)
+#define GPIO21_MC2_DAT5		PIN_CFG(21, ALT_A)
+#define GPIO21_SM_ADQ6		PIN_CFG(21, ALT_B)
+
+#define GPIO22_GPIO		PIN_CFG(22, GPIO)
+#define GPIO22_MC2_DAT7		PIN_CFG(22, ALT_A)
+#define GPIO22_SM_ADQ7		PIN_CFG(22, ALT_B)
+
+#define GPIO23_GPIO		PIN_CFG(23, GPIO)
+#define GPIO23_MC2_DAT0		PIN_CFG(23, ALT_A)
+#define GPIO23_SM_ADQ12		PIN_CFG(23, ALT_B)
+#define GPIO23_MC0_DAT1		PIN_CFG(23, ALT_C)
+
+#define GPIO24_GPIO		PIN_CFG(24, GPIO)
+#define GPIO24_MC2_DAT2		PIN_CFG(24, ALT_A)
+#define GPIO24_SM_ADQ13		PIN_CFG(24, ALT_B)
+#define GPIO24_MC0_DAT3		PIN_CFG(24, ALT_C)
+
+#define GPIO25_GPIO		PIN_CFG(25, GPIO)
+#define GPIO25_MC2_DAT4		PIN_CFG(25, ALT_A)
+#define GPIO25_SM_ADQ14		PIN_CFG(25, ALT_B)
+#define GPIO25_MC0_CMD		PIN_CFG(25, ALT_C)
+
+#define GPIO26_GPIO		PIN_CFG(26, GPIO)
+#define GPIO26_MC2_DAT6		PIN_CFG(26, ALT_A)
+#define GPIO26_SM_ADQ15		PIN_CFG(26, ALT_B)
+
+#define GPIO27_GPIO		PIN_CFG(27, GPIO)
+#define GPIO27_SM_CS0n		PIN_CFG(27, ALT_A)
+#define GPIO27_SM_PS0n		PIN_CFG(27, ALT_B)
+
+#define GPIO28_GPIO		PIN_CFG(28, GPIO)
+#define GPIO28_U0_TXD		PIN_CFG(28, ALT_A)
+#define GPIO28_SM_A0		PIN_CFG(28, ALT_B)
+
+#define GPIO29_GPIO		PIN_CFG(29, GPIO)
+#define GPIO29_U0_RXD		PIN_CFG(29, ALT_A)
+#define GPIO29_SM_A1		PIN_CFG(29, ALT_B)
+#define GPIO29_PWM_0		PIN_CFG(29, ALT_C)
+
+#define GPIO30_GPIO		PIN_CFG(30, GPIO)
+#define GPIO30_MC0_DAT5		PIN_CFG(30, ALT_A)
+#define GPIO30_SM_A2		PIN_CFG(30, ALT_B)
+#define GPIO30_PWM_1		PIN_CFG(30, ALT_C)
+
+#define GPIO31_GPIO		PIN_CFG(31, GPIO)
+#define GPIO31_MC0_DAT7		PIN_CFG(31, ALT_A)
+#define GPIO31_SM_CS2n		PIN_CFG(31, ALT_B)
+#define GPIO31_PWM_2		PIN_CFG(31, ALT_C)
+
+#define GPIO32_GPIO		PIN_CFG(32, GPIO)
+#define GPIO32_MSP0_TCK		PIN_CFG(32, ALT_A)
+#define GPIO32_ACCI2S0_SCK	PIN_CFG(32, ALT_B)
+
+#define GPIO33_GPIO		PIN_CFG(33, GPIO)
+#define GPIO33_MSP0_TFS		PIN_CFG(33, ALT_A)
+#define GPIO33_ACCI2S0_WS	PIN_CFG(33, ALT_B)
+
+#define GPIO34_GPIO		PIN_CFG(34, GPIO)
+#define GPIO34_MSP0_TXD		PIN_CFG(34, ALT_A)
+#define GPIO34_ACCI2S0_DLD	PIN_CFG(34, ALT_B)
+
+#define GPIO35_GPIO		PIN_CFG(35, GPIO)
+#define GPIO35_MSP0_RXD		PIN_CFG(35, ALT_A)
+#define GPIO35_ACCI2S0_ULD	PIN_CFG(35, ALT_B)
+
+#define GPIO64_GPIO		PIN_CFG(64, GPIO)
+#define GPIO64_USB_DAT0		PIN_CFG(64, ALT_A)
+#define GPIO64_U0_TXD		PIN_CFG(64, ALT_B)
+
+#define GPIO65_GPIO		PIN_CFG(65, GPIO)
+#define GPIO65_USB_DAT1		PIN_CFG(65, ALT_A)
+#define GPIO65_U0_RXD		PIN_CFG(65, ALT_B)
+
+#define GPIO66_GPIO		PIN_CFG(66, GPIO)
+#define GPIO66_USB_DAT2		PIN_CFG(66, ALT_A)
+
+#define GPIO67_GPIO		PIN_CFG(67, GPIO)
+#define GPIO67_USB_DAT3		PIN_CFG(67, ALT_A)
+
+#define GPIO68_GPIO		PIN_CFG(68, GPIO)
+#define GPIO68_USB_DAT4		PIN_CFG(68, ALT_A)
+
+#define GPIO69_GPIO		PIN_CFG(69, GPIO)
+#define GPIO69_USB_DAT5		PIN_CFG(69, ALT_A)
+
+#define GPIO70_GPIO		PIN_CFG(70, GPIO)
+#define GPIO70_USB_DAT6		PIN_CFG(70, ALT_A)
+
+#define GPIO71_GPIO		PIN_CFG(71, GPIO)
+#define GPIO71_USB_DAT7		PIN_CFG(71, ALT_A)
+
+#define GPIO72_GPIO		PIN_CFG(72, GPIO)
+#define GPIO72_USB_STP		PIN_CFG(72, ALT_A)
+
+#define GPIO73_GPIO		PIN_CFG(73, GPIO)
+#define GPIO73_USB_DIR		PIN_CFG(73, ALT_A)
+
+#define GPIO74_GPIO		PIN_CFG(74, GPIO)
+#define GPIO74_USB_NXT		PIN_CFG(74, ALT_A)
+
+#define GPIO75_GPIO		PIN_CFG(75, GPIO)
+#define GPIO75_USB_XCLK		PIN_CFG(75, ALT_A)
+
+#define GPIO76_GPIO		PIN_CFG(76, GPIO)
+
+#define GPIO77_GPIO		PIN_CFG(77, GPIO)
+#define GPIO77_ACCTX_ON		PIN_CFG(77, ALT_A)
+
+#define GPIO78_GPIO		PIN_CFG(78, GPIO)
+#define GPIO78_IRQn		PIN_CFG(78, ALT_A)
+
+#define GPIO79_GPIO		PIN_CFG(79, GPIO)
+#define GPIO79_ACCSIM_Clk	PIN_CFG(79, ALT_A)
+
+#define GPIO80_GPIO		PIN_CFG(80, GPIO)
+#define GPIO80_ACCSIM_Da	PIN_CFG(80, ALT_A)
+
+#define GPIO81_GPIO		PIN_CFG(81, GPIO)
+#define GPIO81_ACCSIM_Reset	PIN_CFG(81, ALT_A)
+
+#define GPIO82_GPIO		PIN_CFG(82, GPIO)
+#define GPIO82_ACCSIM_DDir	PIN_CFG(82, ALT_A)
+
+#define GPIO96_GPIO		PIN_CFG(96, GPIO)
+#define GPIO96_MSP1_TCK		PIN_CFG(96, ALT_A)
+#define GPIO96_PRCMU_DEBUG3	PIN_CFG(96, ALT_B)
+#define GPIO96_PRCMU_DEBUG7	PIN_CFG(96, ALT_C)
+
+#define GPIO97_GPIO		PIN_CFG(97, GPIO)
+#define GPIO97_MSP1_TFS		PIN_CFG(97, ALT_A)
+#define GPIO97_PRCMU_DEBUG2	PIN_CFG(97, ALT_B)
+#define GPIO97_PRCMU_DEBUG6	PIN_CFG(97, ALT_C)
+
+#define GPIO98_GPIO		PIN_CFG(98, GPIO)
+#define GPIO98_MSP1_TXD		PIN_CFG(98, ALT_A)
+#define GPIO98_PRCMU_DEBUG1	PIN_CFG(98, ALT_B)
+#define GPIO98_PRCMU_DEBUG5	PIN_CFG(98, ALT_C)
+
+#define GPIO99_GPIO		PIN_CFG(99, GPIO)
+#define GPIO99_MSP1_RXD		PIN_CFG(99, ALT_A)
+#define GPIO99_PRCMU_DEBUG0	PIN_CFG(99, ALT_B)
+#define GPIO99_PRCMU_DEBUG4	PIN_CFG(99, ALT_C)
+
+#define GPIO100_GPIO		PIN_CFG(100, GPIO)
+#define GPIO100_I2C0_SCL	PIN_CFG(100, ALT_A)
+
+#define GPIO101_GPIO		PIN_CFG(101, GPIO)
+#define GPIO101_I2C0_SDA	PIN_CFG(101, ALT_A)
+
+#define GPIO128_GPIO		PIN_CFG(128, GPIO)
+#define GPIO128_KP_I0		PIN_CFG(128, ALT_A)
+#define GPIO128_BUSMON_D0	PIN_CFG(128, ALT_B)
+
+#define GPIO129_GPIO		PIN_CFG(129, GPIO)
+#define GPIO129_KP_O0		PIN_CFG(129, ALT_A)
+#define GPIO129_BUSMON_D1	PIN_CFG(129, ALT_B)
+
+#define GPIO130_GPIO		PIN_CFG(130, GPIO)
+#define GPIO130_KP_I1		PIN_CFG(130, ALT_A)
+#define GPIO130_BUSMON_D2	PIN_CFG(130, ALT_B)
+
+#define GPIO131_GPIO		PIN_CFG(131, GPIO)
+#define GPIO131_KP_O1		PIN_CFG(131, ALT_A)
+#define GPIO131_BUSMON_D3	PIN_CFG(131, ALT_B)
+
+#define GPIO132_GPIO		PIN_CFG(132, GPIO)
+#define GPIO132_KP_I2		PIN_CFG(132, ALT_A)
+#define GPIO132_ETM_D15		PIN_CFG(132, ALT_B)
+#define GPIO132_STMAPE_CLK	PIN_CFG(132, ALT_C)
+
+#define GPIO133_GPIO		PIN_CFG(133, GPIO)
+#define GPIO133_KP_O2		PIN_CFG(133, ALT_A)
+#define GPIO133_ETM_D14		PIN_CFG(133, ALT_B)
+#define GPIO133_U0_RXD		PIN_CFG(133, ALT_C)
+
+#define GPIO134_GPIO		PIN_CFG(134, GPIO)
+#define GPIO134_KP_I3		PIN_CFG(134, ALT_A)
+#define GPIO134_ETM_D13		PIN_CFG(134, ALT_B)
+#define GPIO134_STMAPE_DAT0	PIN_CFG(134, ALT_C)
+
+#define GPIO135_GPIO		PIN_CFG(135, GPIO)
+#define GPIO135_KP_O3		PIN_CFG(135, ALT_A)
+#define GPIO135_ETM_D12		PIN_CFG(135, ALT_B)
+#define GPIO135_STMAPE_DAT1	PIN_CFG(135, ALT_C)
+
+#define GPIO136_GPIO		PIN_CFG(136, GPIO)
+#define GPIO136_KP_I4		PIN_CFG(136, ALT_A)
+#define GPIO136_ETM_D11		PIN_CFG(136, ALT_B)
+#define GPIO136_STMAPE_DAT2	PIN_CFG(136, ALT_C)
+
+#define GPIO137_GPIO		PIN_CFG(137, GPIO)
+#define GPIO137_KP_O4		PIN_CFG(137, ALT_A)
+#define GPIO137_ETM_D10		PIN_CFG(137, ALT_B)
+#define GPIO137_STMAPE_DAT3	PIN_CFG(137, ALT_C)
+
+#define GPIO138_GPIO		PIN_CFG(138, GPIO)
+#define GPIO138_KP_I5		PIN_CFG(138, ALT_A)
+#define GPIO138_ETM_D9		PIN_CFG(138, ALT_B)
+#define GPIO138_U0_TXD		PIN_CFG(138, ALT_C)
+
+#define GPIO139_GPIO		PIN_CFG(139, GPIO)
+#define GPIO139_KP_O5		PIN_CFG(139, ALT_A)
+#define GPIO139_ETM_D8		PIN_CFG(139, ALT_B)
+#define GPIO139_BUSMON_D11	PIN_CFG(139, ALT_C)
+
+#define GPIO140_GPIO		PIN_CFG(140, GPIO)
+#define GPIO140_KP_I6		PIN_CFG(140, ALT_A)
+#define GPIO140_ETM_D7		PIN_CFG(140, ALT_B)
+#define GPIO140_STMAPE_CLK	PIN_CFG(140, ALT_C)
+
+#define GPIO141_GPIO		PIN_CFG(141, GPIO)
+#define GPIO141_KP_O6		PIN_CFG(141, ALT_A)
+#define GPIO141_ETM_D6		PIN_CFG(141, ALT_B)
+#define GPIO141_U0_RXD		PIN_CFG(141, ALT_C)
+
+#define GPIO142_GPIO		PIN_CFG(142, GPIO)
+#define GPIO142_KP_I7		PIN_CFG(142, ALT_A)
+#define GPIO142_ETM_D5		PIN_CFG(142, ALT_B)
+#define GPIO142_STMAPE_DAT0	PIN_CFG(142, ALT_C)
+
+#define GPIO143_GPIO		PIN_CFG(143, GPIO)
+#define GPIO143_KP_O7		PIN_CFG(143, ALT_A)
+#define GPIO143_ETM_D4		PIN_CFG(143, ALT_B)
+#define GPIO143_STMAPE_DAT1	PIN_CFG(143, ALT_C)
+
+#define GPIO144_GPIO		PIN_CFG(144, GPIO)
+#define GPIO144_I2C3_SCL	PIN_CFG(144, ALT_A)
+#define GPIO144_ETM_D3		PIN_CFG(144, ALT_B)
+#define GPIO144_STMAPE_DAT2	PIN_CFG(144, ALT_C)
+
+#define GPIO145_GPIO		PIN_CFG(145, GPIO)
+#define GPIO145_I2C3_SDA	PIN_CFG(145, ALT_A)
+#define GPIO145_ETM_D2		PIN_CFG(145, ALT_B)
+#define GPIO145_STMAPE_DAT3	PIN_CFG(145, ALT_C)
+
+#define GPIO146_GPIO		PIN_CFG(146, GPIO)
+#define GPIO146_PWM_0		PIN_CFG(146, ALT_A)
+#define GPIO146_ETM_D1		PIN_CFG(146, ALT_B)
+
+#define GPIO147_GPIO		PIN_CFG(147, GPIO)
+#define GPIO147_PWM_1		PIN_CFG(147, ALT_A)
+#define GPIO147_ETM_D0		PIN_CFG(147, ALT_B)
+
+#define GPIO148_GPIO		PIN_CFG(148, GPIO)
+#define GPIO148_PWM_2		PIN_CFG(148, ALT_A)
+#define GPIO148_ETM_CLK		PIN_CFG(148, ALT_B)
+
+#define GPIO160_GPIO		PIN_CFG(160, GPIO)
+#define GPIO160_CLKOUT_REQn	PIN_CFG(160, ALT_A)
+
+#define GPIO161_GPIO		PIN_CFG(161, GPIO)
+#define GPIO161_CLKOUT_0	PIN_CFG(161, ALT_A)
+
+#define GPIO162_GPIO		PIN_CFG(162, GPIO)
+#define GPIO162_CLKOUT_1	PIN_CFG(162, ALT_A)
+
+#define GPIO163_GPIO		PIN_CFG(163, GPIO)
+
+#define GPIO164_GPIO		PIN_CFG(164, GPIO)
+#define GPIO164_GPS_START	PIN_CFG(164, ALT_A)
+
+#define GPIO165_GPIO		PIN_CFG(165, GPIO)
+#define GPIO165_SPI1_CS2n	PIN_CFG(165, ALT_A)
+#define GPIO165_U3_RXD		PIN_CFG(165, ALT_B)
+#define GPIO165_BUSMON_D20	PIN_CFG(165, ALT_C)
+
+#define GPIO166_GPIO		PIN_CFG(166, GPIO)
+#define GPIO166_SPI1_CS1n	PIN_CFG(166, ALT_A)
+#define GPIO166_U3_TXD		PIN_CFG(166, ALT_B)
+#define GPIO166_BUSMON_D21	PIN_CFG(166, ALT_C)
+
+#define GPIO167_GPIO		PIN_CFG(167, GPIO)
+#define GPIO167_SPI1_CS0n	PIN_CFG(167, ALT_A)
+#define GPIO167_U3_RTSn		PIN_CFG(167, ALT_B)
+#define GPIO167_BUSMON_D22	PIN_CFG(167, ALT_C)
+
+#define GPIO168_GPIO		PIN_CFG(168, GPIO)
+#define GPIO168_SPI1_RXD	PIN_CFG(168, ALT_A)
+#define GPIO168_U3_CTSn		PIN_CFG(168, ALT_B)
+#define GPIO168_BUSMON_D23	PIN_CFG(168, ALT_C)
+
+#define GPIO169_GPIO		PIN_CFG(169, GPIO)
+#define GPIO169_SPI1_TXD	PIN_CFG(169, ALT_A)
+#define GPIO169_DDR_RC		PIN_CFG(169, ALT_B)
+#define GPIO169_BUSMON_D24	PIN_CFG(169, ALT_C)
+
+#define GPIO170_GPIO		PIN_CFG(170, GPIO)
+#define GPIO170_SPI1_CLK	PIN_CFG(170, ALT_A)
+
+#define GPIO171_GPIO		PIN_CFG(171, GPIO)
+#define GPIO171_MC3_DAT0	PIN_CFG(171, ALT_A)
+#define GPIO171_SPI3_RXD	PIN_CFG(171, ALT_B)
+#define GPIO171_BUSMON_D25	PIN_CFG(171, ALT_C)
+
+#define GPIO172_GPIO		PIN_CFG(172, GPIO)
+#define GPIO172_MC3_DAT1	PIN_CFG(172, ALT_A)
+#define GPIO172_SPI3_CS1n	PIN_CFG(172, ALT_B)
+#define GPIO172_BUSMON_D26	PIN_CFG(172, ALT_C)
+
+#define GPIO173_GPIO		PIN_CFG(173, GPIO)
+#define GPIO173_MC3_DAT2	PIN_CFG(173, ALT_A)
+#define GPIO173_SPI3_CS2n	PIN_CFG(173, ALT_B)
+#define GPIO173_BUSMON_D27	PIN_CFG(173, ALT_C)
+
+#define GPIO174_GPIO		PIN_CFG(174, GPIO)
+#define GPIO174_MC3_DAT3	PIN_CFG(174, ALT_A)
+#define GPIO174_SPI3_CS0n	PIN_CFG(174, ALT_B)
+#define GPIO174_BUSMON_D28	PIN_CFG(174, ALT_C)
+
+#define GPIO175_GPIO		PIN_CFG(175, GPIO)
+#define GPIO175_MC3_CMD		PIN_CFG(175, ALT_A)
+#define GPIO175_SPI3_TXD	PIN_CFG(175, ALT_B)
+#define GPIO175_BUSMON_D29	PIN_CFG(175, ALT_C)
+
+#define GPIO176_GPIO		PIN_CFG(176, GPIO)
+#define GPIO176_MC3_CLK		PIN_CFG(176, ALT_A)
+#define GPIO176_SPI3_CLK	PIN_CFG(176, ALT_B)
+
+#define GPIO177_GPIO		PIN_CFG(177, GPIO)
+#define GPIO177_U2_RXD		PIN_CFG(177, ALT_A)
+#define GPIO177_I2C3_SCL	PIN_CFG(177, ALT_B)
+#define GPIO177_BUSMON_D30	PIN_CFG(177, ALT_C)
+
+#define GPIO178_GPIO		PIN_CFG(178, GPIO)
+#define GPIO178_U2_TXD		PIN_CFG(178, ALT_A)
+#define GPIO178_I2C3_SDA	PIN_CFG(178, ALT_B)
+#define GPIO178_BUSMON_D31	PIN_CFG(178, ALT_C)
+
+#define GPIO179_GPIO		PIN_CFG(179, GPIO)
+#define GPIO179_U2_CTSn		PIN_CFG(179, ALT_A)
+#define GPIO179_U3_RXD		PIN_CFG(179, ALT_B)
+#define GPIO179_BUSMON_D32	PIN_CFG(179, ALT_C)
+
+#define GPIO180_GPIO		PIN_CFG(180, GPIO)
+#define GPIO180_U2_RTSn		PIN_CFG(180, ALT_A)
+#define GPIO180_U3_TXD		PIN_CFG(180, ALT_B)
+#define GPIO180_BUSMON_D33	PIN_CFG(180, ALT_C)
+
+#define GPIO185_GPIO		PIN_CFG(185, GPIO)
+#define GPIO185_SPI3_CS2n	PIN_CFG(185, ALT_A)
+#define GPIO185_MC4_DAT0	PIN_CFG(185, ALT_B)
+
+#define GPIO186_GPIO		PIN_CFG(186, GPIO)
+#define GPIO186_SPI3_CS1n	PIN_CFG(186, ALT_A)
+#define GPIO186_MC4_DAT1	PIN_CFG(186, ALT_B)
+
+#define GPIO187_GPIO		PIN_CFG(187, GPIO)
+#define GPIO187_SPI3_CS0n	PIN_CFG(187, ALT_A)
+#define GPIO187_MC4_DAT2	PIN_CFG(187, ALT_B)
+
+#define GPIO188_GPIO		PIN_CFG(188, GPIO)
+#define GPIO188_SPI3_RXD	PIN_CFG(188, ALT_A)
+#define GPIO188_MC4_DAT3	PIN_CFG(188, ALT_B)
+
+#define GPIO189_GPIO		PIN_CFG(189, GPIO)
+#define GPIO189_SPI3_TXD	PIN_CFG(189, ALT_A)
+#define GPIO189_MC4_CMD		PIN_CFG(189, ALT_B)
+
+#define GPIO190_GPIO		PIN_CFG(190, GPIO)
+#define GPIO190_SPI3_CLK	PIN_CFG(190, ALT_A)
+#define GPIO190_MC4_CLK		PIN_CFG(190, ALT_B)
+
+#define GPIO191_GPIO		PIN_CFG(191, GPIO)
+#define GPIO191_MC1_DAT0	PIN_CFG(191, ALT_A)
+#define GPIO191_MC4_DAT4	PIN_CFG(191, ALT_B)
+#define GPIO191_STMAPE_DAT0	PIN_CFG(191, ALT_C)
+
+#define GPIO192_GPIO		PIN_CFG(192, GPIO)
+#define GPIO192_MC1_DAT1	PIN_CFG(192, ALT_A)
+#define GPIO192_MC4_DAT5	PIN_CFG(192, ALT_B)
+#define GPIO192_STMAPE_DAT1	PIN_CFG(192, ALT_C)
+
+#define GPIO193_GPIO		PIN_CFG(193, GPIO)
+#define GPIO193_MC1_DAT2	PIN_CFG(193, ALT_A)
+#define GPIO193_MC4_DAT6	PIN_CFG(193, ALT_B)
+#define GPIO193_STMAPE_DAT2	PIN_CFG(193, ALT_C)
+
+#define GPIO194_GPIO		PIN_CFG(194, GPIO)
+#define GPIO194_MC1_DAT3	PIN_CFG(194, ALT_A)
+#define GPIO194_MC4_DAT7	PIN_CFG(194, ALT_B)
+#define GPIO194_STMAPE_DAT3	PIN_CFG(194, ALT_C)
+
+#define GPIO195_GPIO		PIN_CFG(195, GPIO)
+#define GPIO195_MC1_CLK		PIN_CFG(195, ALT_A)
+#define GPIO195_STMAPE_CLK	PIN_CFG(195, ALT_B)
+#define GPIO195_BUSMON_CLK	PIN_CFG(195, ALT_C)
+
+#define GPIO196_GPIO		PIN_CFG(196, GPIO)
+#define GPIO196_MC1_CMD		PIN_CFG(196, ALT_A)
+#define GPIO196_U0_RXD		PIN_CFG(196, ALT_B)
+#define GPIO196_BUSMON_D38	PIN_CFG(196, ALT_C)
+
+#define GPIO197_GPIO		PIN_CFG(197, GPIO)
+#define GPIO197_MC1_CMDDIR	PIN_CFG(197, ALT_A)
+#define GPIO197_BUSMON_D39	PIN_CFG(197, ALT_B)
+
+#define GPIO198_GPIO		PIN_CFG(198, GPIO)
+#define GPIO198_MC1_FBCLK	PIN_CFG(198, ALT_A)
+
+#define GPIO199_GPIO		PIN_CFG(199, GPIO)
+#define GPIO199_MC1_DAT0DIR	PIN_CFG(199, ALT_A)
+#define GPIO199_BUSMON_D40	PIN_CFG(199, ALT_B)
+
+#define GPIO200_GPIO		PIN_CFG(200, GPIO)
+#define GPIO200_U1_TXD		PIN_CFG(200, ALT_A)
+#define GPIO200_ACCU0_RTSn	PIN_CFG(200, ALT_B)
+
+#define GPIO201_GPIO		PIN_CFG(201, GPIO)
+#define GPIO201_U1_RXD		PIN_CFG(201, ALT_A)
+#define GPIO201_ACCU0_CTSn	PIN_CFG(201, ALT_B)
+
+#define GPIO202_GPIO		PIN_CFG(202, GPIO)
+#define GPIO202_U1_CTSn		PIN_CFG(202, ALT_A)
+#define GPIO202_ACCU0_RXD	PIN_CFG(202, ALT_B)
+
+#define GPIO203_GPIO		PIN_CFG(203, GPIO)
+#define GPIO203_U1_RTSn		PIN_CFG(203, ALT_A)
+#define GPIO203_ACCU0_TXD	PIN_CFG(203, ALT_B)
+
+#define GPIO204_GPIO		PIN_CFG(204, GPIO)
+#define GPIO204_SPI0_CS2n	PIN_CFG(204, ALT_A)
+#define GPIO204_ACCGPIO_000	PIN_CFG(204, ALT_B)
+#define GPIO204_LCD_VSI1	PIN_CFG(204, ALT_C)
+
+#define GPIO205_GPIO		PIN_CFG(205, GPIO)
+#define GPIO205_SPI0_CS1n	PIN_CFG(205, ALT_A)
+#define GPIO205_ACCGPIO_001	PIN_CFG(205, ALT_B)
+#define GPIO205_LCD_D3		PIN_CFG(205, ALT_C)
+
+#define GPIO206_GPIO		PIN_CFG(206, GPIO)
+#define GPIO206_SPI0_CS0n	PIN_CFG(206, ALT_A)
+#define GPIO206_ACCGPIO_002	PIN_CFG(206, ALT_B)
+#define GPIO206_LCD_D2		PIN_CFG(206, ALT_C)
+
+#define GPIO207_GPIO		PIN_CFG(207, GPIO)
+#define GPIO207_SPI0_RXD	PIN_CFG(207, ALT_A)
+#define GPIO207_ACCGPIO_003	PIN_CFG(207, ALT_B)
+#define GPIO207_LCD_D1		PIN_CFG(207, ALT_C)
+
+#define GPIO208_GPIO		PIN_CFG(208, GPIO)
+#define GPIO208_SPI0_TXD	PIN_CFG(208, ALT_A)
+#define GPIO208_ACCGPIO_004	PIN_CFG(208, ALT_B)
+#define GPIO208_LCD_D0		PIN_CFG(208, ALT_C)
+
+#define GPIO209_GPIO		PIN_CFG(209, GPIO)
+#define GPIO209_SPI0_CLK	PIN_CFG(209, ALT_A)
+#define GPIO209_ACCGPIO_005	PIN_CFG(209, ALT_B)
+#define GPIO209_LCD_CLK		PIN_CFG(209, ALT_C)
+
+#define GPIO210_GPIO		PIN_CFG(210, GPIO)
+#define GPIO210_LCD_VSO		PIN_CFG(210, ALT_A)
+#define GPIO210_PRCMU_PWRCTRL1	PIN_CFG(210, ALT_B)
+
+#define GPIO211_GPIO		PIN_CFG(211, GPIO)
+#define GPIO211_LCD_VSI0	PIN_CFG(211, ALT_A)
+#define GPIO211_PRCMU_PWRCTRL2	PIN_CFG(211, ALT_B)
+
+#define GPIO212_GPIO		PIN_CFG(212, GPIO)
+#define GPIO212_SPI2_CS2n	PIN_CFG(212, ALT_A)
+#define GPIO212_LCD_HSO		PIN_CFG(212, ALT_B)
+
+#define GPIO213_GPIO		PIN_CFG(213, GPIO)
+#define GPIO213_SPI2_CS1n	PIN_CFG(213, ALT_A)
+#define GPIO213_LCD_DE		PIN_CFG(213, ALT_B)
+#define GPIO213_BUSMON_D16	PIN_CFG(213, ALT_C)
+
+#define GPIO214_GPIO		PIN_CFG(214, GPIO)
+#define GPIO214_SPI2_CS0n	PIN_CFG(214, ALT_A)
+#define GPIO214_LCD_D7		PIN_CFG(214, ALT_B)
+#define GPIO214_BUSMON_D17	PIN_CFG(214, ALT_C)
+
+#define GPIO215_GPIO		PIN_CFG(215, GPIO)
+#define GPIO215_SPI2_RXD	PIN_CFG(215, ALT_A)
+#define GPIO215_LCD_D6		PIN_CFG(215, ALT_B)
+#define GPIO215_BUSMON_D18	PIN_CFG(215, ALT_C)
+
+#define GPIO216_GPIO		PIN_CFG(216, GPIO)
+#define GPIO216_SPI2_CLK	PIN_CFG(216, ALT_A)
+#define GPIO216_LCD_D5		PIN_CFG(216, ALT_B)
+
+#define GPIO217_GPIO		PIN_CFG(217, GPIO)
+#define GPIO217_SPI2_TXD	PIN_CFG(217, ALT_A)
+#define GPIO217_LCD_D4		PIN_CFG(217, ALT_B)
+#define GPIO217_BUSMON_D19	PIN_CFG(217, ALT_C)
+
+#define GPIO218_GPIO		PIN_CFG(218, GPIO)
+#define GPIO218_I2C2_SCL	PIN_CFG(218, ALT_A)
+#define GPIO218_LCD_VSO		PIN_CFG(218, ALT_B)
+
+#define GPIO219_GPIO		PIN_CFG(219, GPIO)
+#define GPIO219_I2C2_SDA	PIN_CFG(219, ALT_A)
+#define GPIO219_LCD_D3		PIN_CFG(219, ALT_B)
+
+#define GPIO220_GPIO		PIN_CFG(220, GPIO)
+#define GPIO220_MSP2_TCK	PIN_CFG(220, ALT_A)
+#define GPIO220_LCD_D2		PIN_CFG(220, ALT_B)
+
+#define GPIO221_GPIO		PIN_CFG(221, GPIO)
+#define GPIO221_MSP2_TFS	PIN_CFG(221, ALT_A)
+#define GPIO221_LCD_D1		PIN_CFG(221, ALT_B)
+
+#define GPIO222_GPIO		PIN_CFG(222, GPIO)
+#define GPIO222_MSP2_TXD	PIN_CFG(222, ALT_A)
+#define GPIO222_LCD_D0		PIN_CFG(222, ALT_B)
+
+#define GPIO223_GPIO		PIN_CFG(223, GPIO)
+#define GPIO223_MSP2_RXD	PIN_CFG(223, ALT_A)
+#define GPIO223_LCD_CLK		PIN_CFG(223, ALT_B)
+
+#define GPIO224_GPIO		PIN_CFG(224, GPIO)
+#define GPIO224_PRCMU_PWRCTRL0	PIN_CFG(224, ALT_A)
+#define GPIO224_LCD_VSI1	PIN_CFG(224, ALT_B)
+
+#define GPIO225_GPIO		PIN_CFG(225, GPIO)
+#define GPIO225_PRCMU_PWRCTRL1	PIN_CFG(225, ALT_A)
+#define GPIO225_IRDA_RXD	PIN_CFG(225, ALT_B)
+
+#define GPIO226_GPIO		PIN_CFG(226, GPIO)
+#define GPIO226_PRCMU_PWRCTRL2	PIN_CFG(226, ALT_A)
+#define GPIO226_IRRC_DAT	PIN_CFG(226, ALT_B)
+
+#define GPIO227_GPIO		PIN_CFG(227, GPIO)
+#define GPIO227_IRRC_DAT	PIN_CFG(227, ALT_A)
+#define GPIO227_IRDA_TXD	PIN_CFG(227, ALT_B)
+
+#endif
diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h
index 9055d5d..f923764 100644
--- a/arch/arm/mach-ux500/pins-db8500.h
+++ b/arch/arm/mach-ux500/pins-db8500.h
@@ -96,57 +96,57 @@
 #define GPIO17_SLIM0_CLK	PIN_CFG(17, ALT_C)
 
 #define GPIO18_GPIO		PIN_CFG(18, GPIO)
-#define GPIO18_MC0_CMDDIR	PIN_CFG(18, ALT_A)
+#define GPIO18_MC0_CMDDIR	PIN_CFG_PULL(18, ALT_A, UP)
 #define GPIO18_U2_RXD		PIN_CFG(18, ALT_B)
 #define GPIO18_MS_IEP		PIN_CFG(18, ALT_C)
 
 #define GPIO19_GPIO		PIN_CFG(19, GPIO)
-#define GPIO19_MC0_DAT0DIR	PIN_CFG(19, ALT_A)
+#define GPIO19_MC0_DAT0DIR	PIN_CFG_PULL(19, ALT_A, UP)
 #define GPIO19_U2_TXD		PIN_CFG(19, ALT_B)
 #define GPIO19_MS_DAT0DIR	PIN_CFG(19, ALT_C)
 
 #define GPIO20_GPIO		PIN_CFG(20, GPIO)
-#define GPIO20_MC0_DAT2DIR	PIN_CFG(20, ALT_A)
+#define GPIO20_MC0_DAT2DIR	PIN_CFG_PULL(20, ALT_A, UP)
 #define GPIO20_UARTMOD_TXD	PIN_CFG(20, ALT_B)
 #define GPIO20_IP_TRIGOUT	PIN_CFG(20, ALT_C)
 
 #define GPIO21_GPIO		PIN_CFG(21, GPIO)
-#define GPIO21_MC0_DAT31DIR	PIN_CFG(21, ALT_A)
+#define GPIO21_MC0_DAT31DIR	PIN_CFG_PULL(21, ALT_A, UP)
 #define GPIO21_MSP0_SCK		PIN_CFG(21, ALT_B)
 #define GPIO21_MS_DAT31DIR	PIN_CFG(21, ALT_C)
 
 #define GPIO22_GPIO		PIN_CFG(22, GPIO)
-#define GPIO22_MC0_FBCLK	PIN_CFG(22, ALT_A)
+#define GPIO22_MC0_FBCLK	PIN_CFG_PULL(22, ALT_A, UP)
 #define GPIO22_UARTMOD_RXD	PIN_CFG(22, ALT_B)
 #define GPIO22_MS_FBCLK		PIN_CFG(22, ALT_C)
 
 #define GPIO23_GPIO		PIN_CFG(23, GPIO)
-#define GPIO23_MC0_CLK		PIN_CFG(23, ALT_A)
+#define GPIO23_MC0_CLK		PIN_CFG_PULL(23, ALT_A, UP)
 #define GPIO23_STMMOD_CLK	PIN_CFG(23, ALT_B)
 #define GPIO23_MS_CLK		PIN_CFG(23, ALT_C)
 
 #define GPIO24_GPIO		PIN_CFG(24, GPIO)
-#define GPIO24_MC0_CMD		PIN_CFG(24, ALT_A)
+#define GPIO24_MC0_CMD		PIN_CFG_PULL(24, ALT_A, UP)
 #define GPIO24_UARTMOD_RXD	PIN_CFG(24, ALT_B)
 #define GPIO24_MS_BS		PIN_CFG(24, ALT_C)
 
 #define GPIO25_GPIO		PIN_CFG(25, GPIO)
-#define GPIO25_MC0_DAT0		PIN_CFG(25, ALT_A)
+#define GPIO25_MC0_DAT0		PIN_CFG_PULL(25, ALT_A, UP)
 #define GPIO25_STMMOD_DAT0	PIN_CFG(25, ALT_B)
 #define GPIO25_MS_DAT0		PIN_CFG(25, ALT_C)
 
 #define GPIO26_GPIO		PIN_CFG(26, GPIO)
-#define GPIO26_MC0_DAT1		PIN_CFG(26, ALT_A)
+#define GPIO26_MC0_DAT1		PIN_CFG_PULL(26, ALT_A, UP)
 #define GPIO26_STMMOD_DAT1	PIN_CFG(26, ALT_B)
 #define GPIO26_MS_DAT1		PIN_CFG(26, ALT_C)
 
 #define GPIO27_GPIO		PIN_CFG(27, GPIO)
-#define GPIO27_MC0_DAT2		PIN_CFG(27, ALT_A)
+#define GPIO27_MC0_DAT2		PIN_CFG_PULL(27, ALT_A, UP)
 #define GPIO27_STMMOD_DAT2	PIN_CFG(27, ALT_B)
 #define GPIO27_MS_DAT2		PIN_CFG(27, ALT_C)
 
 #define GPIO28_GPIO		PIN_CFG(28, GPIO)
-#define GPIO28_MC0_DAT3		PIN_CFG(28, ALT_A)
+#define GPIO28_MC0_DAT3		PIN_CFG_PULL(28, ALT_A, UP)
 #define GPIO28_STMMOD_DAT3	PIN_CFG(28, ALT_B)
 #define GPIO28_MS_DAT3		PIN_CFG(28, ALT_C)
 
@@ -357,48 +357,48 @@
 #define GPIO97_MC5_DAT7		PIN_CFG(97, ALT_C)
 
 #define GPIO128_GPIO		PIN_CFG(128, GPIO)
-#define GPIO128_MC2_CLK		PIN_CFG(128, ALT_A)
+#define GPIO128_MC2_CLK		PIN_CFG_PULL(128, ALT_A, UP)
 #define GPIO128_SM_CKO		PIN_CFG(128, ALT_B)
 
 #define GPIO129_GPIO		PIN_CFG(129, GPIO)
-#define GPIO129_MC2_CMD		PIN_CFG(129, ALT_A)
+#define GPIO129_MC2_CMD		PIN_CFG_PULL(129, ALT_A, UP)
 #define GPIO129_SM_WAIT0n	PIN_CFG(129, ALT_B)
 
 #define GPIO130_GPIO		PIN_CFG(130, GPIO)
-#define GPIO130_MC2_FBCLK	PIN_CFG(130, ALT_A)
+#define GPIO130_MC2_FBCLK	PIN_CFG_PULL(130, ALT_A, UP)
 #define GPIO130_SM_FBCLK	PIN_CFG(130, ALT_B)
 #define GPIO130_MC2_RSTN	PIN_CFG(130, ALT_C)
 
 #define GPIO131_GPIO		PIN_CFG(131, GPIO)
-#define GPIO131_MC2_DAT0	PIN_CFG(131, ALT_A)
+#define GPIO131_MC2_DAT0	PIN_CFG_PULL(131, ALT_A, UP)
 #define GPIO131_SM_ADQ8		PIN_CFG(131, ALT_B)
 
 #define GPIO132_GPIO		PIN_CFG(132, GPIO)
-#define GPIO132_MC2_DAT1	PIN_CFG(132, ALT_A)
+#define GPIO132_MC2_DAT1	PIN_CFG_PULL(132, ALT_A, UP)
 #define GPIO132_SM_ADQ9		PIN_CFG(132, ALT_B)
 
 #define GPIO133_GPIO		PIN_CFG(133, GPIO)
-#define GPIO133_MC2_DAT2	PIN_CFG(133, ALT_A)
+#define GPIO133_MC2_DAT2	PIN_CFG_PULL(133, ALT_A, UP)
 #define GPIO133_SM_ADQ10	PIN_CFG(133, ALT_B)
 
 #define GPIO134_GPIO		PIN_CFG(134, GPIO)
-#define GPIO134_MC2_DAT3	PIN_CFG(134, ALT_A)
+#define GPIO134_MC2_DAT3	PIN_CFG_PULL(134, ALT_A, UP)
 #define GPIO134_SM_ADQ11	PIN_CFG(134, ALT_B)
 
 #define GPIO135_GPIO		PIN_CFG(135, GPIO)
-#define GPIO135_MC2_DAT4	PIN_CFG(135, ALT_A)
+#define GPIO135_MC2_DAT4	PIN_CFG_PULL(135, ALT_A, UP)
 #define GPIO135_SM_ADQ12	PIN_CFG(135, ALT_B)
 
 #define GPIO136_GPIO		PIN_CFG(136, GPIO)
-#define GPIO136_MC2_DAT5	PIN_CFG(136, ALT_A)
+#define GPIO136_MC2_DAT5	PIN_CFG_PULL(136, ALT_A, UP)
 #define GPIO136_SM_ADQ13	PIN_CFG(136, ALT_B)
 
 #define GPIO137_GPIO		PIN_CFG(137, GPIO)
-#define GPIO137_MC2_DAT6	PIN_CFG(137, ALT_A)
+#define GPIO137_MC2_DAT6	PIN_CFG_PULL(137, ALT_A, UP)
 #define GPIO137_SM_ADQ14	PIN_CFG(137, ALT_B)
 
 #define GPIO138_GPIO		PIN_CFG(138, GPIO)
-#define GPIO138_MC2_DAT7	PIN_CFG(138, ALT_A)
+#define GPIO138_MC2_DAT7	PIN_CFG_PULL(138, ALT_A, UP)
 #define GPIO138_SM_ADQ15	PIN_CFG(138, ALT_B)
 
 #define GPIO139_GPIO		PIN_CFG(139, GPIO)
@@ -459,82 +459,82 @@
 #define GPIO152_KP_O9		PIN_CFG(152, ALT_C)
 
 #define GPIO153_GPIO		PIN_CFG(153, GPIO)
-#define GPIO153_KP_I7		PIN_CFG(153, ALT_A)
+#define GPIO153_KP_I7		PIN_CFG_PULL(153, ALT_A, DOWN)
 #define GPIO153_LCD_D24		PIN_CFG(153, ALT_B)
 #define GPIO153_U2_RXD		PIN_CFG(153, ALT_C)
 
 #define GPIO154_GPIO		PIN_CFG(154, GPIO)
-#define GPIO154_KP_I6		PIN_CFG(154, ALT_A)
+#define GPIO154_KP_I6		PIN_CFG_PULL(154, ALT_A, DOWN)
 #define GPIO154_LCD_D25		PIN_CFG(154, ALT_B)
 #define GPIO154_U2_TXD		PIN_CFG(154, ALT_C)
 
 #define GPIO155_GPIO		PIN_CFG(155, GPIO)
-#define GPIO155_KP_I5		PIN_CFG(155, ALT_A)
+#define GPIO155_KP_I5		PIN_CFG_PULL(155, ALT_A, DOWN)
 #define GPIO155_LCD_D26		PIN_CFG(155, ALT_B)
 #define GPIO155_STMAPE_CLK	PIN_CFG(155, ALT_C)
 
 #define GPIO156_GPIO		PIN_CFG(156, GPIO)
-#define GPIO156_KP_I4		PIN_CFG(156, ALT_A)
+#define GPIO156_KP_I4		PIN_CFG_PULL(156, ALT_A, DOWN)
 #define GPIO156_LCD_D27		PIN_CFG(156, ALT_B)
 #define GPIO156_STMAPE_DAT3	PIN_CFG(156, ALT_C)
 
 #define GPIO157_GPIO		PIN_CFG(157, GPIO)
-#define GPIO157_KP_O7		PIN_CFG(157, ALT_A)
+#define GPIO157_KP_O7		PIN_CFG_PULL(157, ALT_A, UP)
 #define GPIO157_LCD_D28		PIN_CFG(157, ALT_B)
 #define GPIO157_STMAPE_DAT2	PIN_CFG(157, ALT_C)
 
 #define GPIO158_GPIO		PIN_CFG(158, GPIO)
-#define GPIO158_KP_O6		PIN_CFG(158, ALT_A)
+#define GPIO158_KP_O6		PIN_CFG_PULL(158, ALT_A, UP)
 #define GPIO158_LCD_D29		PIN_CFG(158, ALT_B)
 #define GPIO158_STMAPE_DAT1	PIN_CFG(158, ALT_C)
 
 #define GPIO159_GPIO		PIN_CFG(159, GPIO)
-#define GPIO159_KP_O5		PIN_CFG(159, ALT_A)
+#define GPIO159_KP_O5		PIN_CFG_PULL(159, ALT_A, UP)
 #define GPIO159_LCD_D30		PIN_CFG(159, ALT_B)
 #define GPIO159_STMAPE_DAT0	PIN_CFG(159, ALT_C)
 
 #define GPIO160_GPIO		PIN_CFG(160, GPIO)
-#define GPIO160_KP_O4		PIN_CFG(160, ALT_A)
+#define GPIO160_KP_O4		PIN_CFG_PULL(160, ALT_A, UP)
 #define GPIO160_LCD_D31		PIN_CFG(160, ALT_B)
 #define GPIO160_NONE		PIN_CFG(160, ALT_C)
 
 #define GPIO161_GPIO		PIN_CFG(161, GPIO)
-#define GPIO161_KP_I3		PIN_CFG(161, ALT_A)
+#define GPIO161_KP_I3		PIN_CFG_PULL(161, ALT_A, DOWN)
 #define GPIO161_LCD_D32		PIN_CFG(161, ALT_B)
 #define GPIO161_UARTMOD_RXD	PIN_CFG(161, ALT_C)
 
 #define GPIO162_GPIO		PIN_CFG(162, GPIO)
-#define GPIO162_KP_I2		PIN_CFG(162, ALT_A)
+#define GPIO162_KP_I2		PIN_CFG_PULL(162, ALT_A, DOWN)
 #define GPIO162_LCD_D33		PIN_CFG(162, ALT_B)
 #define GPIO162_UARTMOD_TXD	PIN_CFG(162, ALT_C)
 
 #define GPIO163_GPIO		PIN_CFG(163, GPIO)
-#define GPIO163_KP_I1		PIN_CFG(163, ALT_A)
+#define GPIO163_KP_I1		PIN_CFG_PULL(163, ALT_A, DOWN)
 #define GPIO163_LCD_D34		PIN_CFG(163, ALT_B)
 #define GPIO163_STMMOD_CLK	PIN_CFG(163, ALT_C)
 
 #define GPIO164_GPIO		PIN_CFG(164, GPIO)
-#define GPIO164_KP_I0		PIN_CFG(164, ALT_A)
+#define GPIO164_KP_I0		PIN_CFG_PULL(164, ALT_A, UP)
 #define GPIO164_LCD_D35		PIN_CFG(164, ALT_B)
 #define GPIO164_STMMOD_DAT3	PIN_CFG(164, ALT_C)
 
 #define GPIO165_GPIO		PIN_CFG(165, GPIO)
-#define GPIO165_KP_O3		PIN_CFG(165, ALT_A)
+#define GPIO165_KP_O3		PIN_CFG_PULL(165, ALT_A, UP)
 #define GPIO165_LCD_D36		PIN_CFG(165, ALT_B)
 #define GPIO165_STMMOD_DAT2	PIN_CFG(165, ALT_C)
 
 #define GPIO166_GPIO		PIN_CFG(166, GPIO)
-#define GPIO166_KP_O2		PIN_CFG(166, ALT_A)
+#define GPIO166_KP_O2		PIN_CFG_PULL(166, ALT_A, UP)
 #define GPIO166_LCD_D37		PIN_CFG(166, ALT_B)
 #define GPIO166_STMMOD_DAT1	PIN_CFG(166, ALT_C)
 
 #define GPIO167_GPIO		PIN_CFG(167, GPIO)
-#define GPIO167_KP_O1		PIN_CFG(167, ALT_A)
+#define GPIO167_KP_O1		PIN_CFG_PULL(167, ALT_A, UP)
 #define GPIO167_LCD_D38		PIN_CFG(167, ALT_B)
 #define GPIO167_STMMOD_DAT0	PIN_CFG(167, ALT_C)
 
 #define GPIO168_GPIO		PIN_CFG(168, GPIO)
-#define GPIO168_KP_O0		PIN_CFG(168, ALT_A)
+#define GPIO168_KP_O0		PIN_CFG_PULL(168, ALT_A, UP)
 #define GPIO168_LCD_D39		PIN_CFG(168, ALT_B)
 #define GPIO168_NONE		PIN_CFG(168, ALT_C)
 
@@ -569,39 +569,39 @@
 #define GPIO196_MSP2_RXD	PIN_CFG(196, ALT_A)
 
 #define GPIO197_GPIO		PIN_CFG(197, GPIO)
-#define GPIO197_MC4_DAT3	PIN_CFG(197, ALT_A)
+#define GPIO197_MC4_DAT3	PIN_CFG_PULL(197, ALT_A, UP)
 
 #define GPIO198_GPIO		PIN_CFG(198, GPIO)
-#define GPIO198_MC4_DAT2	PIN_CFG(198, ALT_A)
+#define GPIO198_MC4_DAT2	PIN_CFG_PULL(198, ALT_A, UP)
 
 #define GPIO199_GPIO		PIN_CFG(199, GPIO)
-#define GPIO199_MC4_DAT1	PIN_CFG(199, ALT_A)
+#define GPIO199_MC4_DAT1	PIN_CFG_PULL(199, ALT_A, UP)
 
 #define GPIO200_GPIO		PIN_CFG(200, GPIO)
-#define GPIO200_MC4_DAT0	PIN_CFG(200, ALT_A)
+#define GPIO200_MC4_DAT0	PIN_CFG_PULL(200, ALT_A, UP)
 
 #define GPIO201_GPIO		PIN_CFG(201, GPIO)
-#define GPIO201_MC4_CMD		PIN_CFG(201, ALT_A)
+#define GPIO201_MC4_CMD		PIN_CFG_PULL(201, ALT_A, UP)
 
 #define GPIO202_GPIO		PIN_CFG(202, GPIO)
-#define GPIO202_MC4_FBCLK	PIN_CFG(202, ALT_A)
+#define GPIO202_MC4_FBCLK	PIN_CFG_PULL(202, ALT_A, UP)
 #define GPIO202_PWL		PIN_CFG(202, ALT_B)
 #define GPIO202_MC4_RSTN	PIN_CFG(202, ALT_C)
 
 #define GPIO203_GPIO		PIN_CFG(203, GPIO)
-#define GPIO203_MC4_CLK		PIN_CFG(203, ALT_A)
+#define GPIO203_MC4_CLK		PIN_CFG_PULL(203, ALT_A, UP)
 
 #define GPIO204_GPIO		PIN_CFG(204, GPIO)
-#define GPIO204_MC4_DAT7	PIN_CFG(204, ALT_A)
+#define GPIO204_MC4_DAT7	PIN_CFG_PULL(204, ALT_A, UP)
 
 #define GPIO205_GPIO		PIN_CFG(205, GPIO)
-#define GPIO205_MC4_DAT6	PIN_CFG(205, ALT_A)
+#define GPIO205_MC4_DAT6	PIN_CFG_PULL(205, ALT_A, UP)
 
 #define GPIO206_GPIO		PIN_CFG(206, GPIO)
-#define GPIO206_MC4_DAT5	PIN_CFG(206, ALT_A)
+#define GPIO206_MC4_DAT5	PIN_CFG_PULL(206, ALT_A, UP)
 
 #define GPIO207_GPIO		PIN_CFG(207, GPIO)
-#define GPIO207_MC4_DAT4	PIN_CFG(207, ALT_A)
+#define GPIO207_MC4_DAT4	PIN_CFG_PULL(207, ALT_A, UP)
 
 #define GPIO208_GPIO		PIN_CFG(208, GPIO)
 #define GPIO208_MC1_CLK		PIN_CFG(208, ALT_A)
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 438ef16..9e4c678 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -78,6 +78,8 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
 	outer_clean_range(__pa(&pen_release), __pa(&pen_release) + 1);
 
+	smp_cross_call(cpumask_of(cpu));
+
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
 		if (pen_release == -1)
diff --git a/arch/arm/mach-ux500/prcmu.c b/arch/arm/mach-ux500/prcmu.c
new file mode 100644
index 0000000..293274d
--- /dev/null
+++ b/arch/arm/mach-ux500/prcmu.c
@@ -0,0 +1,231 @@
+/*
+ * Copyright (C) ST Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
+ *
+ * U8500 PRCMU driver.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+#include <linux/completion.h>
+#include <linux/jiffies.h>
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+
+#include <mach/hardware.h>
+#include <mach/prcmu-regs.h>
+
+#define PRCMU_TCDM_BASE __io_address(U8500_PRCMU_TCDM_BASE)
+
+#define REQ_MB5 (PRCMU_TCDM_BASE + 0xE44)
+#define ACK_MB5 (PRCMU_TCDM_BASE + 0xDF4)
+
+#define REQ_MB5_I2C_SLAVE_OP (REQ_MB5)
+#define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1)
+#define REQ_MB5_I2C_REG (REQ_MB5 + 2)
+#define REQ_MB5_I2C_VAL (REQ_MB5 + 3)
+
+#define ACK_MB5_I2C_STATUS (ACK_MB5 + 1)
+#define ACK_MB5_I2C_VAL (ACK_MB5 + 3)
+
+#define I2C_WRITE(slave) ((slave) << 1)
+#define I2C_READ(slave) (((slave) << 1) | BIT(0))
+#define I2C_STOP_EN BIT(3)
+
+enum ack_mb5_status {
+	I2C_WR_OK = 0x01,
+	I2C_RD_OK = 0x02,
+};
+
+#define MBOX_BIT BIT
+#define NUM_MBOX 8
+
+static struct {
+	struct mutex lock;
+	struct completion work;
+	bool failed;
+	struct {
+		u8 status;
+		u8 value;
+	} ack;
+} mb5_transfer;
+
+/**
+ * prcmu_abb_read() - Read register value(s) from the ABB.
+ * @slave:	The I2C slave address.
+ * @reg:	The (start) register address.
+ * @value:	The read out value(s).
+ * @size:	The number of registers to read.
+ *
+ * Reads register value(s) from the ABB.
+ * @size has to be 1 for the current firmware version.
+ */
+int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	int r;
+
+	if (size != 1)
+		return -EINVAL;
+
+	r = mutex_lock_interruptible(&mb5_transfer.lock);
+	if (r)
+		return r;
+
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+		cpu_relax();
+
+	writeb(I2C_READ(slave), REQ_MB5_I2C_SLAVE_OP);
+	writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS);
+	writeb(reg, REQ_MB5_I2C_REG);
+
+	writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
+	if (!wait_for_completion_timeout(&mb5_transfer.work,
+			msecs_to_jiffies(500))) {
+		pr_err("prcmu: prcmu_abb_read timed out.\n");
+		r = -EIO;
+		goto unlock_and_return;
+	}
+	r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO);
+	if (!r)
+		*value = mb5_transfer.ack.value;
+
+unlock_and_return:
+	mutex_unlock(&mb5_transfer.lock);
+	return r;
+}
+EXPORT_SYMBOL(prcmu_abb_read);
+
+/**
+ * prcmu_abb_write() - Write register value(s) to the ABB.
+ * @slave:	The I2C slave address.
+ * @reg:	The (start) register address.
+ * @value:	The value(s) to write.
+ * @size:	The number of registers to write.
+ *
+ * Reads register value(s) from the ABB.
+ * @size has to be 1 for the current firmware version.
+ */
+int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	int r;
+
+	if (size != 1)
+		return -EINVAL;
+
+	r = mutex_lock_interruptible(&mb5_transfer.lock);
+	if (r)
+		return r;
+
+
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+		cpu_relax();
+
+	writeb(I2C_WRITE(slave), REQ_MB5_I2C_SLAVE_OP);
+	writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS);
+	writeb(reg, REQ_MB5_I2C_REG);
+	writeb(*value, REQ_MB5_I2C_VAL);
+
+	writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
+	if (!wait_for_completion_timeout(&mb5_transfer.work,
+			msecs_to_jiffies(500))) {
+		pr_err("prcmu: prcmu_abb_write timed out.\n");
+		r = -EIO;
+		goto unlock_and_return;
+	}
+	r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO);
+
+unlock_and_return:
+	mutex_unlock(&mb5_transfer.lock);
+	return r;
+}
+EXPORT_SYMBOL(prcmu_abb_write);
+
+static void read_mailbox_0(void)
+{
+	writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_1(void)
+{
+	writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_2(void)
+{
+	writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_3(void)
+{
+	writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_4(void)
+{
+	writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_5(void)
+{
+	mb5_transfer.ack.status = readb(ACK_MB5_I2C_STATUS);
+	mb5_transfer.ack.value = readb(ACK_MB5_I2C_VAL);
+	complete(&mb5_transfer.work);
+	writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_6(void)
+{
+	writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_7(void)
+{
+	writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR);
+}
+
+static void (* const read_mailbox[NUM_MBOX])(void) = {
+	read_mailbox_0,
+	read_mailbox_1,
+	read_mailbox_2,
+	read_mailbox_3,
+	read_mailbox_4,
+	read_mailbox_5,
+	read_mailbox_6,
+	read_mailbox_7
+};
+
+static irqreturn_t prcmu_irq_handler(int irq, void *data)
+{
+	u32 bits;
+	u8 n;
+
+	bits = (readl(PRCM_ARM_IT1_VAL) & (MBOX_BIT(NUM_MBOX) - 1));
+	if (unlikely(!bits))
+		return IRQ_NONE;
+
+	for (n = 0; bits; n++) {
+		if (bits & MBOX_BIT(n)) {
+			bits -= MBOX_BIT(n);
+			read_mailbox[n]();
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+static int __init prcmu_init(void)
+{
+	mutex_init(&mb5_transfer.lock);
+	init_completion(&mb5_transfer.work);
+
+	/* Clean up the mailbox interrupts after pre-kernel code. */
+	writel((MBOX_BIT(NUM_MBOX) - 1), PRCM_ARM_IT1_CLEAR);
+
+	return request_irq(IRQ_PRCMU, prcmu_irq_handler, 0, "prcmu", NULL);
+}
+
+arch_initcall(prcmu_init);
diff --git a/arch/arm/mach-ux500/ste-dma40-db5500.h b/arch/arm/mach-ux500/ste-dma40-db5500.h
new file mode 100644
index 0000000..cb2110c
--- /dev/null
+++ b/arch/arm/mach-ux500/ste-dma40-db5500.h
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * DB5500-SoC-specific configuration for DMA40
+ */
+
+#ifndef STE_DMA40_DB5500_H
+#define STE_DMA40_DB5500_H
+
+#define DB5500_DMA_NR_DEV 64
+
+enum dma_src_dev_type {
+	DB5500_DMA_DEV0_SPI0_RX = 0,
+	DB5500_DMA_DEV1_SPI1_RX = 1,
+	DB5500_DMA_DEV2_SPI2_RX = 2,
+	DB5500_DMA_DEV3_SPI3_RX = 3,
+	DB5500_DMA_DEV4_USB_OTG_IEP_1_9 = 4,
+	DB5500_DMA_DEV5_USB_OTG_IEP_2_10 = 5,
+	DB5500_DMA_DEV6_USB_OTG_IEP_3_11 = 6,
+	DB5500_DMA_DEV7_IRDA_RFS = 7,
+	DB5500_DMA_DEV8_IRDA_FIFO_RX = 8,
+	DB5500_DMA_DEV9_MSP0_RX = 9,
+	DB5500_DMA_DEV10_MSP1_RX = 10,
+	DB5500_DMA_DEV11_MSP2_RX = 11,
+	DB5500_DMA_DEV12_UART0_RX = 12,
+	DB5500_DMA_DEV13_UART1_RX = 13,
+	DB5500_DMA_DEV14_UART2_RX = 14,
+	DB5500_DMA_DEV15_UART3_RX = 15,
+	DB5500_DMA_DEV16_USB_OTG_IEP_8 = 16,
+	DB5500_DMA_DEV17_USB_OTG_IEP_1_9 = 17,
+	DB5500_DMA_DEV18_USB_OTG_IEP_2_10 = 18,
+	DB5500_DMA_DEV19_USB_OTG_IEP_3_11 = 19,
+	DB5500_DMA_DEV20_USB_OTG_IEP_4_12 = 20,
+	DB5500_DMA_DEV21_USB_OTG_IEP_5_13 = 21,
+	DB5500_DMA_DEV22_USB_OTG_IEP_6_14 = 22,
+	DB5500_DMA_DEV23_USB_OTG_IEP_7_15 = 23,
+	DB5500_DMA_DEV24_SDMMC0_RX = 24,
+	DB5500_DMA_DEV25_SDMMC1_RX = 25,
+	DB5500_DMA_DEV26_SDMMC2_RX = 26,
+	DB5500_DMA_DEV27_SDMMC3_RX = 27,
+	DB5500_DMA_DEV28_SDMMC4_RX = 28,
+	/* 29 - 32 not used */
+	DB5500_DMA_DEV33_SDMMC0_RX = 33,
+	DB5500_DMA_DEV34_SDMMC1_RX = 34,
+	DB5500_DMA_DEV35_SDMMC2_RX = 35,
+	DB5500_DMA_DEV36_SDMMC3_RX = 36,
+	DB5500_DMA_DEV37_SDMMC4_RX = 37,
+	DB5500_DMA_DEV38_USB_OTG_IEP_8 = 38,
+	DB5500_DMA_DEV39_USB_OTG_IEP_1_9 = 39,
+	DB5500_DMA_DEV40_USB_OTG_IEP_2_10 = 40,
+	DB5500_DMA_DEV41_USB_OTG_IEP_3_11 = 41,
+	DB5500_DMA_DEV42_USB_OTG_IEP_4_12 = 42,
+	DB5500_DMA_DEV43_USB_OTG_IEP_5_13 = 43,
+	DB5500_DMA_DEV44_USB_OTG_IEP_6_14 = 44,
+	DB5500_DMA_DEV45_USB_OTG_IEP_7_15 = 45,
+	/* 46 not used */
+	DB5500_DMA_DEV47_MCDE_RX = 47,
+	DB5500_DMA_DEV48_CRYPTO1_RX = 48,
+	/* 49, 50 not used */
+	DB5500_DMA_DEV49_I2C1_RX = 51,
+	DB5500_DMA_DEV50_I2C3_RX = 52,
+	DB5500_DMA_DEV51_I2C2_RX = 53,
+	/* 54 - 60 not used */
+	DB5500_DMA_DEV61_CRYPTO0_RX = 61,
+	/* 62, 63 not used */
+};
+
+enum dma_dest_dev_type {
+	DB5500_DMA_DEV0_SPI0_TX = 0,
+	DB5500_DMA_DEV1_SPI1_TX = 1,
+	DB5500_DMA_DEV2_SPI2_TX = 2,
+	DB5500_DMA_DEV3_SPI3_TX = 3,
+	DB5500_DMA_DEV4_USB_OTG_OEP_1_9 = 4,
+	DB5500_DMA_DEV5_USB_OTG_OEP_2_10 = 5,
+	DB5500_DMA_DEV6_USB_OTG_OEP_3_11 = 6,
+	DB5500_DMA_DEV7_IRRC_TX = 7,
+	DB5500_DMA_DEV8_IRDA_FIFO_TX = 8,
+	DB5500_DMA_DEV9_MSP0_TX = 9,
+	DB5500_DMA_DEV10_MSP1_TX = 10,
+	DB5500_DMA_DEV11_MSP2_TX = 11,
+	DB5500_DMA_DEV12_UART0_TX = 12,
+	DB5500_DMA_DEV13_UART1_TX = 13,
+	DB5500_DMA_DEV14_UART2_TX = 14,
+	DB5500_DMA_DEV15_UART3_TX = 15,
+	DB5500_DMA_DEV16_USB_OTG_OEP_8 = 16,
+	DB5500_DMA_DEV17_USB_OTG_OEP_1_9 = 17,
+	DB5500_DMA_DEV18_USB_OTG_OEP_2_10 = 18,
+	DB5500_DMA_DEV19_USB_OTG_OEP_3_11 = 19,
+	DB5500_DMA_DEV20_USB_OTG_OEP_4_12 = 20,
+	DB5500_DMA_DEV21_USB_OTG_OEP_5_13 = 21,
+	DB5500_DMA_DEV22_USB_OTG_OEP_6_14 = 22,
+	DB5500_DMA_DEV23_USB_OTG_OEP_7_15 = 23,
+	DB5500_DMA_DEV24_SDMMC0_TX = 24,
+	DB5500_DMA_DEV25_SDMMC1_TX = 25,
+	DB5500_DMA_DEV26_SDMMC2_TX = 26,
+	DB5500_DMA_DEV27_SDMMC3_TX = 27,
+	DB5500_DMA_DEV28_SDMMC4_TX = 28,
+	/* 29 - 31 not used */
+	DB5500_DMA_DEV32_FSMC_TX = 32,
+	DB5500_DMA_DEV33_SDMMC0_TX = 33,
+	DB5500_DMA_DEV34_SDMMC1_TX = 34,
+	DB5500_DMA_DEV35_SDMMC2_TX = 35,
+	DB5500_DMA_DEV36_SDMMC3_TX = 36,
+	DB5500_DMA_DEV37_SDMMC4_TX = 37,
+	DB5500_DMA_DEV38_USB_OTG_OEP_8 = 38,
+	DB5500_DMA_DEV39_USB_OTG_OEP_1_9 = 39,
+	DB5500_DMA_DEV40_USB_OTG_OEP_2_10 = 40,
+	DB5500_DMA_DEV41_USB_OTG_OEP_3_11 = 41,
+	DB5500_DMA_DEV42_USB_OTG_OEP_4_12 = 42,
+	DB5500_DMA_DEV43_USB_OTG_OEP_5_13 = 43,
+	DB5500_DMA_DEV44_USB_OTG_OEP_6_14 = 44,
+	DB5500_DMA_DEV45_USB_OTG_OEP_7_15 = 45,
+	/* 46 not used */
+	DB5500_DMA_DEV47_STM_TX = 47,
+	DB5500_DMA_DEV48_CRYPTO1_TX = 48,
+	DB5500_DMA_DEV49_CRYPTO1_TX_HASH1_TX = 49,
+	DB5500_DMA_DEV50_HASH1_TX = 50,
+	DB5500_DMA_DEV51_I2C1_TX = 51,
+	DB5500_DMA_DEV52_I2C3_TX = 52,
+	DB5500_DMA_DEV53_I2C2_TX = 53,
+	/* 54, 55 not used */
+	DB5500_DMA_MEMCPY_TX_1 = 56,
+	DB5500_DMA_MEMCPY_TX_2 = 57,
+	DB5500_DMA_MEMCPY_TX_3 = 58,
+	DB5500_DMA_MEMCPY_TX_4 = 59,
+	DB5500_DMA_MEMCPY_TX_5 = 60,
+	DB5500_DMA_DEV61_CRYPTO0_TX = 61,
+	DB5500_DMA_DEV62_CRYPTO0_TX_HASH0_TX = 62,
+	DB5500_DMA_DEV63_HASH0_TX = 63,
+};
+
+#endif
diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h
index 9d9d3797..a616419 100644
--- a/arch/arm/mach-ux500/ste-dma40-db8500.h
+++ b/arch/arm/mach-ux500/ste-dma40-db8500.h
@@ -10,145 +10,135 @@
 #ifndef STE_DMA40_DB8500_H
 #define STE_DMA40_DB8500_H
 
-#define STEDMA40_NR_DEV 64
+#define DB8500_DMA_NR_DEV 64
 
 enum dma_src_dev_type {
-	STEDMA40_DEV_SPI0_RX = 0,
-	STEDMA40_DEV_SD_MMC0_RX = 1,
-	STEDMA40_DEV_SD_MMC1_RX = 2,
-	STEDMA40_DEV_SD_MMC2_RX = 3,
-	STEDMA40_DEV_I2C1_RX = 4,
-	STEDMA40_DEV_I2C3_RX = 5,
-	STEDMA40_DEV_I2C2_RX = 6,
-	STEDMA40_DEV_I2C4_RX = 7, /* Only on V1 */
-	STEDMA40_DEV_SSP0_RX = 8,
-	STEDMA40_DEV_SSP1_RX = 9,
-	STEDMA40_DEV_MCDE_RX = 10,
-	STEDMA40_DEV_UART2_RX = 11,
-	STEDMA40_DEV_UART1_RX = 12,
-	STEDMA40_DEV_UART0_RX = 13,
-	STEDMA40_DEV_MSP2_RX = 14,
-	STEDMA40_DEV_I2C0_RX = 15,
-	STEDMA40_DEV_USB_OTG_IEP_8 = 16,
-	STEDMA40_DEV_USB_OTG_IEP_1_9 = 17,
-	STEDMA40_DEV_USB_OTG_IEP_2_10 = 18,
-	STEDMA40_DEV_USB_OTG_IEP_3_11 = 19,
-	STEDMA40_DEV_SLIM0_CH0_RX_HSI_RX_CH0 = 20,
-	STEDMA40_DEV_SLIM0_CH1_RX_HSI_RX_CH1 = 21,
-	STEDMA40_DEV_SLIM0_CH2_RX_HSI_RX_CH2 = 22,
-	STEDMA40_DEV_SLIM0_CH3_RX_HSI_RX_CH3 = 23,
-	STEDMA40_DEV_SRC_SXA0_RX_TX = 24,
-	STEDMA40_DEV_SRC_SXA1_RX_TX = 25,
-	STEDMA40_DEV_SRC_SXA2_RX_TX = 26,
-	STEDMA40_DEV_SRC_SXA3_RX_TX = 27,
-	STEDMA40_DEV_SD_MM2_RX = 28,
-	STEDMA40_DEV_SD_MM0_RX = 29,
-	STEDMA40_DEV_MSP1_RX = 30,
-	/*
-	 * This channel is either SlimBus or MSP,
-	 * never both at the same time.
-	 */
-	STEDMA40_SLIM0_CH0_RX = 31,
-	STEDMA40_DEV_MSP0_RX = 31,
-	STEDMA40_DEV_SD_MM1_RX = 32,
-	STEDMA40_DEV_SPI2_RX = 33,
-	STEDMA40_DEV_I2C3_RX2 = 34,
-	STEDMA40_DEV_SPI1_RX = 35,
-	STEDMA40_DEV_USB_OTG_IEP_4_12 = 36,
-	STEDMA40_DEV_USB_OTG_IEP_5_13 = 37,
-	STEDMA40_DEV_USB_OTG_IEP_6_14 = 38,
-	STEDMA40_DEV_USB_OTG_IEP_7_15 = 39,
-	STEDMA40_DEV_SPI3_RX = 40,
-	STEDMA40_DEV_SD_MM3_RX = 41,
-	STEDMA40_DEV_SD_MM4_RX = 42,
-	STEDMA40_DEV_SD_MM5_RX = 43,
-	STEDMA40_DEV_SRC_SXA4_RX_TX = 44,
-	STEDMA40_DEV_SRC_SXA5_RX_TX = 45,
-	STEDMA40_DEV_SRC_SXA6_RX_TX = 46,
-	STEDMA40_DEV_SRC_SXA7_RX_TX = 47,
-	STEDMA40_DEV_CAC1_RX = 48,
-	/* RX channels 49 and 50 are unused */
-	STEDMA40_DEV_MSHC_RX = 51,
-	STEDMA40_DEV_SLIM1_CH0_RX_HSI_RX_CH4 = 52,
-	STEDMA40_DEV_SLIM1_CH1_RX_HSI_RX_CH5 = 53,
-	STEDMA40_DEV_SLIM1_CH2_RX_HSI_RX_CH6 = 54,
-	STEDMA40_DEV_SLIM1_CH3_RX_HSI_RX_CH7 = 55,
-	/* RX channels 56 thru 60 are unused */
-	STEDMA40_DEV_CAC0_RX = 61,
-	/* RX channels 62 and 63 are unused */
+	DB8500_DMA_DEV0_SPI0_RX = 0,
+	DB8500_DMA_DEV1_SD_MMC0_RX = 1,
+	DB8500_DMA_DEV2_SD_MMC1_RX = 2,
+	DB8500_DMA_DEV3_SD_MMC2_RX = 3,
+	DB8500_DMA_DEV4_I2C1_RX = 4,
+	DB8500_DMA_DEV5_I2C3_RX = 5,
+	DB8500_DMA_DEV6_I2C2_RX = 6,
+	DB8500_DMA_DEV7_I2C4_RX = 7, /* Only on V1 and later */
+	DB8500_DMA_DEV8_SSP0_RX = 8,
+	DB8500_DMA_DEV9_SSP1_RX = 9,
+	DB8500_DMA_DEV10_MCDE_RX = 10,
+	DB8500_DMA_DEV11_UART2_RX = 11,
+	DB8500_DMA_DEV12_UART1_RX = 12,
+	DB8500_DMA_DEV13_UART0_RX = 13,
+	DB8500_DMA_DEV14_MSP2_RX = 14,
+	DB8500_DMA_DEV15_I2C0_RX = 15,
+	DB8500_DMA_DEV16_USB_OTG_IEP_7_15 = 16,
+	DB8500_DMA_DEV17_USB_OTG_IEP_6_14 = 17,
+	DB8500_DMA_DEV18_USB_OTG_IEP_5_13 = 18,
+	DB8500_DMA_DEV19_USB_OTG_IEP_4_12 = 19,
+	DB8500_DMA_DEV20_SLIM0_CH0_RX_HSI_RX_CH0 = 20,
+	DB8500_DMA_DEV21_SLIM0_CH1_RX_HSI_RX_CH1 = 21,
+	DB8500_DMA_DEV22_SLIM0_CH2_RX_HSI_RX_CH2 = 22,
+	DB8500_DMA_DEV23_SLIM0_CH3_RX_HSI_RX_CH3 = 23,
+	DB8500_DMA_DEV24_SRC_SXA0_RX_TX = 24,
+	DB8500_DMA_DEV25_SRC_SXA1_RX_TX = 25,
+	DB8500_DMA_DEV26_SRC_SXA2_RX_TX = 26,
+	DB8500_DMA_DEV27_SRC_SXA3_RX_TX = 27,
+	DB8500_DMA_DEV28_SD_MM2_RX = 28,
+	DB8500_DMA_DEV29_SD_MM0_RX = 29,
+	DB8500_DMA_DEV30_MSP1_RX = 30,
+	/* On DB8500v2, MSP3 RX replaces MSP1 RX */
+	DB8500_DMA_DEV30_MSP3_RX = 30,
+	DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX = 31,
+	DB8500_DMA_DEV32_SD_MM1_RX = 32,
+	DB8500_DMA_DEV33_SPI2_RX = 33,
+	DB8500_DMA_DEV34_I2C3_RX2 = 34,
+	DB8500_DMA_DEV35_SPI1_RX = 35,
+	DB8500_DMA_DEV36_USB_OTG_IEP_3_11 = 36,
+	DB8500_DMA_DEV37_USB_OTG_IEP_2_10 = 37,
+	DB8500_DMA_DEV38_USB_OTG_IEP_1_9 = 38,
+	DB8500_DMA_DEV39_USB_OTG_IEP_8 = 39,
+	DB8500_DMA_DEV40_SPI3_RX = 40,
+	DB8500_DMA_DEV41_SD_MM3_RX = 41,
+	DB8500_DMA_DEV42_SD_MM4_RX = 42,
+	DB8500_DMA_DEV43_SD_MM5_RX = 43,
+	DB8500_DMA_DEV44_SRC_SXA4_RX_TX = 44,
+	DB8500_DMA_DEV45_SRC_SXA5_RX_TX = 45,
+	DB8500_DMA_DEV46_SLIM0_CH8_RX_SRC_SXA6_RX_TX = 46,
+	DB8500_DMA_DEV47_SLIM0_CH9_RX_SRC_SXA7_RX_TX = 47,
+	DB8500_DMA_DEV48_CAC1_RX = 48,
+	/* 49, 50 and 51 are not used */
+	DB8500_DMA_DEV52_SLIM0_CH4_RX_HSI_RX_CH4 = 52,
+	DB8500_DMA_DEV53_SLIM0_CH5_RX_HSI_RX_CH5 = 53,
+	DB8500_DMA_DEV54_SLIM0_CH6_RX_HSI_RX_CH6 = 54,
+	DB8500_DMA_DEV55_SLIM0_CH7_RX_HSI_RX_CH7 = 55,
+	/* 56, 57, 58, 59 and 60 are not used */
+	DB8500_DMA_DEV61_CAC0_RX = 61,
+	/* 62 and 63 are not used */
 };
 
 enum dma_dest_dev_type {
-	STEDMA40_DEV_SPI0_TX = 0,
-	STEDMA40_DEV_SD_MMC0_TX = 1,
-	STEDMA40_DEV_SD_MMC1_TX = 2,
-	STEDMA40_DEV_SD_MMC2_TX = 3,
-	STEDMA40_DEV_I2C1_TX = 4,
-	STEDMA40_DEV_I2C3_TX = 5,
-	STEDMA40_DEV_I2C2_TX = 6,
-	STEDMA50_DEV_I2C4_TX = 7, /* Only on V1 */
-	STEDMA40_DEV_SSP0_TX = 8,
-	STEDMA40_DEV_SSP1_TX = 9,
-	/* TX channel 10 is unused */
-	STEDMA40_DEV_UART2_TX = 11,
-	STEDMA40_DEV_UART1_TX = 12,
-	STEDMA40_DEV_UART0_TX= 13,
-	STEDMA40_DEV_MSP2_TX = 14,
-	STEDMA40_DEV_I2C0_TX = 15,
-	STEDMA40_DEV_USB_OTG_OEP_8 = 16,
-	STEDMA40_DEV_USB_OTG_OEP_1_9 = 17,
-	STEDMA40_DEV_USB_OTG_OEP_2_10= 18,
-	STEDMA40_DEV_USB_OTG_OEP_3_11 = 19,
-	STEDMA40_DEV_SLIM0_CH0_TX_HSI_TX_CH0 = 20,
-	STEDMA40_DEV_SLIM0_CH1_TX_HSI_TX_CH1 = 21,
-	STEDMA40_DEV_SLIM0_CH2_TX_HSI_TX_CH2 = 22,
-	STEDMA40_DEV_SLIM0_CH3_TX_HSI_TX_CH3 = 23,
-	STEDMA40_DEV_DST_SXA0_RX_TX = 24,
-	STEDMA40_DEV_DST_SXA1_RX_TX = 25,
-	STEDMA40_DEV_DST_SXA2_RX_TX = 26,
-	STEDMA40_DEV_DST_SXA3_RX_TX = 27,
-	STEDMA40_DEV_SD_MM2_TX = 28,
-	STEDMA40_DEV_SD_MM0_TX = 29,
-	STEDMA40_DEV_MSP1_TX = 30,
-	/*
-	 * This channel is either SlimBus or MSP,
-	 * never both at the same time.
-	 */
-	STEDMA40_SLIM0_CH0_TX = 31,
-	STEDMA40_DEV_MSP0_TX = 31,
-	STEDMA40_DEV_SD_MM1_TX = 32,
-	STEDMA40_DEV_SPI2_TX = 33,
-	/* Secondary I2C3 channel */
-	STEDMA40_DEV_I2C3_TX2 = 34,
-	STEDMA40_DEV_SPI1_TX = 35,
-	STEDMA40_DEV_USB_OTG_OEP_4_12 = 36,
-	STEDMA40_DEV_USB_OTG_OEP_5_13 = 37,
-	STEDMA40_DEV_USB_OTG_OEP_6_14 = 38,
-	STEDMA40_DEV_USB_OTG_OEP_7_15 = 39,
-	STEDMA40_DEV_SPI3_TX = 40,
-	STEDMA40_DEV_SD_MM3_TX = 41,
-	STEDMA40_DEV_SD_MM4_TX = 42,
-	STEDMA40_DEV_SD_MM5_TX = 43,
-	STEDMA40_DEV_DST_SXA4_RX_TX = 44,
-	STEDMA40_DEV_DST_SXA5_RX_TX = 45,
-	STEDMA40_DEV_DST_SXA6_RX_TX = 46,
-	STEDMA40_DEV_DST_SXA7_RX_TX = 47,
-	STEDMA40_DEV_CAC1_TX = 48,
-	STEDMA40_DEV_CAC1_TX_HAC1_TX = 49,
-	STEDMA40_DEV_HAC1_TX = 50,
-	STEDMA40_MEMCPY_TX_0 = 51,
-	STEDMA40_DEV_SLIM1_CH0_TX_HSI_TX_CH4 = 52,
-	STEDMA40_DEV_SLIM1_CH1_TX_HSI_TX_CH5 = 53,
-	STEDMA40_DEV_SLIM1_CH2_TX_HSI_TX_CH6 = 54,
-	STEDMA40_DEV_SLIM1_CH3_TX_HSI_TX_CH7 = 55,
-	STEDMA40_MEMCPY_TX_1 = 56,
-	STEDMA40_MEMCPY_TX_2 = 57,
-	STEDMA40_MEMCPY_TX_3 = 58,
-	STEDMA40_MEMCPY_TX_4 = 59,
-	STEDMA40_MEMCPY_TX_5 = 60,
-	STEDMA40_DEV_CAC0_TX = 61,
-	STEDMA40_DEV_CAC0_TX_HAC0_TX = 62,
-	STEDMA40_DEV_HAC0_TX = 63,
+	DB8500_DMA_DEV0_SPI0_TX = 0,
+	DB8500_DMA_DEV1_SD_MMC0_TX = 1,
+	DB8500_DMA_DEV2_SD_MMC1_TX = 2,
+	DB8500_DMA_DEV3_SD_MMC2_TX = 3,
+	DB8500_DMA_DEV4_I2C1_TX = 4,
+	DB8500_DMA_DEV5_I2C3_TX = 5,
+	DB8500_DMA_DEV6_I2C2_TX = 6,
+	DB8500_DMA_DEV7_I2C4_TX = 7, /* Only on V1 and later */
+	DB8500_DMA_DEV8_SSP0_TX = 8,
+	DB8500_DMA_DEV9_SSP1_TX = 9,
+	/* 10 is not used*/
+	DB8500_DMA_DEV11_UART2_TX = 11,
+	DB8500_DMA_DEV12_UART1_TX = 12,
+	DB8500_DMA_DEV13_UART0_TX = 13,
+	DB8500_DMA_DEV14_MSP2_TX = 14,
+	DB8500_DMA_DEV15_I2C0_TX = 15,
+	DB8500_DMA_DEV16_USB_OTG_OEP_7_15 = 16,
+	DB8500_DMA_DEV17_USB_OTG_OEP_6_14 = 17,
+	DB8500_DMA_DEV18_USB_OTG_OEP_5_13 = 18,
+	DB8500_DMA_DEV19_USB_OTG_OEP_4_12 = 19,
+	DB8500_DMA_DEV20_SLIM0_CH0_TX_HSI_TX_CH0 = 20,
+	DB8500_DMA_DEV21_SLIM0_CH1_TX_HSI_TX_CH1 = 21,
+	DB8500_DMA_DEV22_SLIM0_CH2_TX_HSI_TX_CH2 = 22,
+	DB8500_DMA_DEV23_SLIM0_CH3_TX_HSI_TX_CH3 = 23,
+	DB8500_DMA_DEV24_DST_SXA0_RX_TX = 24,
+	DB8500_DMA_DEV25_DST_SXA1_RX_TX = 25,
+	DB8500_DMA_DEV26_DST_SXA2_RX_TX = 26,
+	DB8500_DMA_DEV27_DST_SXA3_RX_TX = 27,
+	DB8500_DMA_DEV28_SD_MM2_TX = 28,
+	DB8500_DMA_DEV29_SD_MM0_TX = 29,
+	DB8500_DMA_DEV30_MSP1_TX = 30,
+	DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX = 31,
+	DB8500_DMA_DEV32_SD_MM1_TX = 32,
+	DB8500_DMA_DEV33_SPI2_TX = 33,
+	DB8500_DMA_DEV34_I2C3_TX2 = 34,
+	DB8500_DMA_DEV35_SPI1_TX = 35,
+	DB8500_DMA_DEV36_USB_OTG_OEP_3_11 = 36,
+	DB8500_DMA_DEV37_USB_OTG_OEP_2_10 = 37,
+	DB8500_DMA_DEV38_USB_OTG_OEP_1_9 = 38,
+	DB8500_DMA_DEV39_USB_OTG_OEP_8 = 39,
+	DB8500_DMA_DEV40_SPI3_TX = 40,
+	DB8500_DMA_DEV41_SD_MM3_TX = 41,
+	DB8500_DMA_DEV42_SD_MM4_TX = 42,
+	DB8500_DMA_DEV43_SD_MM5_TX = 43,
+	DB8500_DMA_DEV44_DST_SXA4_RX_TX = 44,
+	DB8500_DMA_DEV45_DST_SXA5_RX_TX = 45,
+	DB8500_DMA_DEV46_SLIM0_CH8_TX_DST_SXA6_RX_TX = 46,
+	DB8500_DMA_DEV47_SLIM0_CH9_TX_DST_SXA7_RX_TX = 47,
+	DB8500_DMA_DEV48_CAC1_TX  = 48,
+	DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49,
+	DB8500_DMA_DEV50_HAC1_TX = 50,
+	DB8500_DMA_MEMCPY_TX_0 = 51,
+	DB8500_DMA_DEV52_SLIM1_CH4_TX_HSI_TX_CH4 = 52,
+	DB8500_DMA_DEV53_SLIM1_CH5_TX_HSI_TX_CH5 = 53,
+	DB8500_DMA_DEV54_SLIM1_CH6_TX_HSI_TX_CH6 = 54,
+	DB8500_DMA_DEV55_SLIM1_CH7_TX_HSI_TX_CH7 = 55,
+	DB8500_DMA_MEMCPY_TX_1 = 56,
+	DB8500_DMA_MEMCPY_TX_2 = 57,
+	DB8500_DMA_MEMCPY_TX_3 = 58,
+	DB8500_DMA_MEMCPY_TX_4 = 59,
+	DB8500_DMA_MEMCPY_TX_5 = 60,
+	DB8500_DMA_DEV61_CAC0_TX = 61,
+	DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62,
+	DB8500_DMA_DEV63_HAC0_TX = 63,
 };
 
 #endif