diff options
| author | Linus Walleij <linus.walleij@linaro.org> | 2012-05-07 01:33:24 +0200 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2012-05-11 11:14:18 +0200 |
| commit | a09806607fd20bed2f8c41fe22793386790a14aa (patch) | |
| tree | 92507b0f7db7a08213cd681905d8b5907b7f401f /arch/arm/mach-ux500/board-mop500-pins.c | |
| parent | 3b64c09b376ae2a82cccdb25aa0c3bc3c3be9d14 (diff) | |
| download | op-kernel-dev-a09806607fd20bed2f8c41fe22793386790a14aa.zip op-kernel-dev-a09806607fd20bed2f8c41fe22793386790a14aa.tar.gz | |
ARM: ux500: switch to using pinctrl for uart0
UART0 had a hack that enabled its pins on init and put it to
sleep on the exit callback. Replace this with the pinctrl calls
to do the same thing and update the runtime table with the two
apropriate states for runtime/active and idle.
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm/mach-ux500/board-mop500-pins.c')
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500-pins.c | 19 |
1 files changed, 19 insertions, 0 deletions
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index 157af7e..dccd29d 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -45,6 +45,10 @@ BIAS(gpio_in_pu_slpm_gpio_nopull, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED|PIN_SLPM BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL); BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED); BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED); +/* Sleep modes */ +BIAS(sleep_in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(sleep_out_hi_wkup_pdis, PIN_SLPM_OUTPUT_HIGH|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(sleep_out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); /* We use these to define hog settings that are always done on boot */ #define DB8500_MUX_HOG(group,func) \ @@ -58,6 +62,10 @@ BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED); #define DB8500_PIN(pin,conf,dev) \ PIN_MAP_CONFIGS_PIN_DEFAULT(dev, "pinctrl-db8500", pin, conf) +#define DB8500_PIN_SLEEP(pin,conf,dev) \ + PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \ + pin, conf) + /* Pin control settings */ static struct pinctrl_map __initdata mop500_family_pinmap[] = { /* @@ -115,6 +123,17 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { * converted to the pinctrl model. Here we model them as "default" * states. */ + /* Mux in UART0 after initialization */ + DB8500_MUX("u0_a_1", "u0", "uart0"), + DB8500_PIN("GPIO0_AJ5", in_pu, "uart0"), /* CTS */ + DB8500_PIN("GPIO1_AJ3", out_hi, "uart0"), /* RTS */ + DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */ + DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */ + /* Sleep state for UART0 */ + DB8500_PIN_SLEEP("GPIO0_AJ5", sleep_in_wkup_pdis, "uart0"), + DB8500_PIN_SLEEP("GPIO1_AJ3", sleep_out_hi_wkup_pdis, "uart0"), + DB8500_PIN_SLEEP("GPIO2_AH4", sleep_in_wkup_pdis, "uart0"), + DB8500_PIN_SLEEP("GPIO3_AH3", sleep_out_wkup_pdis, "uart0"), /* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */ DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"), DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"), |
