summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-tegra
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-05-26 12:22:27 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-05-26 12:22:27 -0700
commitce53044c68cf4fb6c50a2a0d88786be65fae7235 (patch)
tree19c21da7d261412192e189ef3fd1a9ff4e7ba5c2 /arch/arm/mach-tegra
parent0877aa3908aaeeae8fc2850691668c4315d3db56 (diff)
parent046fae440d32cc6dec8148c7e06a8b4b987f8a2f (diff)
downloadop-kernel-dev-ce53044c68cf4fb6c50a2a0d88786be65fae7235.zip
op-kernel-dev-ce53044c68cf4fb6c50a2a0d88786be65fae7235.tar.gz
Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm-soc driver specific updates from Olof Johansson: "These changes are specific to some driver that may be used by multiple boards or socs. The most significant change in here is the move of the samsung iommu code from a platform specific in-kernel interface to the generic iommu subsystem." Fix up trivial conflicts in arch/arm/mach-exynos/Kconfig * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) mmc: dt: Consolidate DT bindings iommu/exynos: Add iommu driver for EXYNOS Platforms ARM: davinci: optimize the DMA ISR ARM: davinci: implement DEBUG_LL port choice ARM: tegra: Add SMMU enabler in AHB ARM: tegra: Add Tegra AHB driver Input: pxa27x_keypad add choice to set direct_key_mask Input: pxa27x_keypad direct key may be low active Input: pxa27x_keypad bug fix for direct_key_mask Input: pxa27x_keypad keep clock on as wakeup source ARM: dt: tegra: pinmux changes for USB ULPI ARM: tegra: add USB ULPI PHY reset GPIO to device tree ARM: tegra: don't hard-code USB ULPI PHY reset_gpio ARM: tegra: change pll_p_out4's rate to 24MHz ARM: tegra: fix pclk rate ARM: tegra: reparent sclk to pll_c_out1 ARM: tegra: Add pllc clock init table ARM: dt: tegra cardhu: basic audio support ARM: dt: tegra30.dtsi: Add audio-related nodes ARM: tegra: add AUXDATA required for audio ...
Diffstat (limited to 'arch/arm/mach-tegra')
-rw-r--r--arch/arm/mach-tegra/Kconfig37
-rw-r--r--arch/arm/mach-tegra/board-dt-tegra30.c10
-rw-r--r--arch/arm/mach-tegra/board-paz00.c3
-rw-r--r--arch/arm/mach-tegra/board-trimslice.c2
-rw-r--r--arch/arm/mach-tegra/common.c22
-rw-r--r--arch/arm/mach-tegra/devices.c5
-rw-r--r--arch/arm/mach-tegra/devices.h4
-rw-r--r--arch/arm/mach-tegra/include/mach/tegra-ahb.h19
-rw-r--r--arch/arm/mach-tegra/include/mach/uncompress.h176
-rw-r--r--arch/arm/mach-tegra/include/mach/usb_phy.h4
-rw-r--r--arch/arm/mach-tegra/tegra2_clocks.c4
-rw-r--r--arch/arm/mach-tegra/tegra30_clocks.c9
-rw-r--r--arch/arm/mach-tegra/usb_phy.c15
13 files changed, 246 insertions, 64 deletions
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index d0f2546..6a113a9 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -50,6 +50,14 @@ config TEGRA_PCI
depends on ARCH_TEGRA_2x_SOC
select PCI
+config TEGRA_AHB
+ bool "Enable AHB driver for NVIDIA Tegra SoCs"
+ default y
+ help
+ Adds AHB configuration functionality for NVIDIA Tegra SoCs,
+ which controls AHB bus master arbitration and some
+ perfomance parameters(priority, prefech size).
+
comment "Tegra board type"
config MACH_HARMONY
@@ -111,7 +119,7 @@ config MACH_VENTANA
Support for the nVidia Ventana development platform
choice
- prompt "Low-level debug console UART"
+ prompt "Default low-level debug console UART"
default TEGRA_DEBUG_UART_NONE
config TEGRA_DEBUG_UART_NONE
@@ -134,6 +142,33 @@ config TEGRA_DEBUG_UARTE
endchoice
+choice
+ prompt "Automatic low-level debug console UART"
+ default TEGRA_DEBUG_UART_AUTO_NONE
+
+config TEGRA_DEBUG_UART_AUTO_NONE
+ bool "None"
+
+config TEGRA_DEBUG_UART_AUTO_ODMDATA
+ bool "Via ODMDATA"
+ help
+ Automatically determines which UART to use for low-level debug based
+ on the ODMDATA value. This value is part of the BCT, and is written
+ to the boot memory device using nvflash, or other flashing tool.
+ When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
+ 0/1/2/3/4 are UART A/B/C/D/E.
+
+config TEGRA_DEBUG_UART_AUTO_SCRATCH
+ bool "Via UART scratch register"
+ help
+ Automatically determines which UART to use for low-level debug based
+ on the UART scratch register value. Some bootloaders put ASCII 'D'
+ in this register when they initialize their own console UART output.
+ Using this option allows the kernel to automatically pick the same
+ UART.
+
+endchoice
+
config TEGRA_SYSTEM_DMA
bool "Enable system DMA driver for NVIDIA Tegra SoCs"
default y
diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
index 5f7c03e..d96dae0 100644
--- a/arch/arm/mach-tegra/board-dt-tegra30.c
+++ b/arch/arm/mach-tegra/board-dt-tegra30.c
@@ -51,12 +51,22 @@ struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C500, "tegra-i2c.2", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C700, "tegra-i2c.3", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000D000, "tegra-i2c.4", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra30-ahub", 0x70080000, "tegra30-ahub", NULL),
{}
};
static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
/* name parent rate enabled */
{ "uarta", "pll_p", 408000000, true },
+ { "pll_a", "pll_p_out1", 564480000, true },
+ { "pll_a_out0", "pll_a", 11289600, true },
+ { "extern1", "pll_a_out0", 0, true },
+ { "clk_out_1", "extern1", 0, true },
+ { "i2s0", "pll_a_out0", 11289600, false},
+ { "i2s1", "pll_a_out0", 11289600, false},
+ { "i2s2", "pll_a_out0", 11289600, false},
+ { "i2s3", "pll_a_out0", 11289600, false},
+ { "i2s4", "pll_a_out0", 11289600, false},
{ NULL, NULL, 0, 0},
};
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index d0735c7..55a1e6c 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -162,6 +162,8 @@ static void paz00_i2c_init(void)
static void paz00_usb_init(void)
{
+ tegra_ehci2_ulpi_phy_config.reset_gpio = TEGRA_ULPI_RST;
+
platform_device_register(&tegra_ehci2_device);
platform_device_register(&tegra_ehci3_device);
}
@@ -179,7 +181,6 @@ static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
{ "uarta", "pll_p", 216000000, true },
{ "uartc", "pll_p", 216000000, true },
- { "pll_p_out4", "pll_p", 24000000, true },
{ "usbd", "clk_m", 12000000, false },
{ "usb2", "clk_m", 12000000, false },
{ "usb3", "clk_m", 12000000, false },
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index bc59b37..832fa93 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -118,6 +118,8 @@ static void trimslice_usb_init(void)
pdata = tegra_ehci1_device.dev.platform_data;
pdata->vbus_gpio = TRIMSLICE_GPIO_USB1_MODE;
+ tegra_ehci2_ulpi_phy_config.reset_gpio = TEGRA_GPIO_PV0;
+
platform_device_register(&tegra_ehci3_device);
platform_device_register(&tegra_ehci2_device);
platform_device_register(&tegra_ehci1_device);
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 22df10f..2d80566 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -82,10 +82,12 @@ static __initdata struct tegra_clk_init_table tegra20_clk_init_table[] = {
{ "pll_p_out1", "pll_p", 28800000, true },
{ "pll_p_out2", "pll_p", 48000000, true },
{ "pll_p_out3", "pll_p", 72000000, true },
- { "pll_p_out4", "pll_p", 108000000, true },
- { "sclk", "pll_p_out4", 108000000, true },
- { "hclk", "sclk", 108000000, true },
- { "pclk", "hclk", 54000000, true },
+ { "pll_p_out4", "pll_p", 24000000, true },
+ { "pll_c", "clk_m", 600000000, true },
+ { "pll_c_out1", "pll_c", 120000000, true },
+ { "sclk", "pll_c_out1", 120000000, true },
+ { "hclk", "sclk", 120000000, true },
+ { "pclk", "hclk", 60000000, true },
{ "csite", NULL, 0, true },
{ "emc", NULL, 0, true },
{ "cpu", NULL, 0, true },
@@ -93,6 +95,17 @@ static __initdata struct tegra_clk_init_table tegra20_clk_init_table[] = {
};
#endif
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = {
+ /* name parent rate enabled */
+ { "clk_m", NULL, 0, true },
+ { "pll_p", "clk_m", 408000000, true },
+ { "pll_p_out1", "pll_p", 9600000, true },
+ { NULL, NULL, 0, 0},
+};
+#endif
+
+
static void __init tegra_init_cache(u32 tag_latency, u32 data_latency)
{
#ifdef CONFIG_CACHE_L2X0
@@ -127,6 +140,7 @@ void __init tegra30_init_early(void)
{
tegra_init_fuse();
tegra30_init_clocks();
+ tegra_clk_init_from_table(tegra30_clk_init_table);
tegra_init_cache(0x441, 0x551);
tegra_pmc_init();
tegra_powergate_init();
diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c
index 2d8dfa2..c70e65f 100644
--- a/arch/arm/mach-tegra/devices.c
+++ b/arch/arm/mach-tegra/devices.c
@@ -439,9 +439,8 @@ static struct resource tegra_usb3_resources[] = {
},
};
-static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
- /* All existing boards use GPIO PV0 for phy reset */
- .reset_gpio = TEGRA_GPIO_PV0,
+struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
+ .reset_gpio = -1,
.clk = "cdev2",
};
diff --git a/arch/arm/mach-tegra/devices.h b/arch/arm/mach-tegra/devices.h
index 138c642..4f50527 100644
--- a/arch/arm/mach-tegra/devices.h
+++ b/arch/arm/mach-tegra/devices.h
@@ -22,6 +22,10 @@
#include <linux/platform_device.h>
#include <linux/platform_data/tegra_usb.h>
+#include <mach/usb_phy.h>
+
+extern struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config;
+
extern struct tegra_ehci_platform_data tegra_ehci1_pdata;
extern struct tegra_ehci_platform_data tegra_ehci2_pdata;
extern struct tegra_ehci_platform_data tegra_ehci3_pdata;
diff --git a/arch/arm/mach-tegra/include/mach/tegra-ahb.h b/arch/arm/mach-tegra/include/mach/tegra-ahb.h
new file mode 100644
index 0000000..e0f8c84
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/tegra-ahb.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __MACH_TEGRA_AHB_H__
+#define __MACH_TEGRA_AHB_H__
+
+extern int tegra_ahb_enable_smmu(struct device_node *ahb);
+
+#endif /* __MACH_TEGRA_AHB_H__ */
diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h
index 5a440f3..937c4c5 100644
--- a/arch/arm/mach-tegra/include/mach/uncompress.h
+++ b/arch/arm/mach-tegra/include/mach/uncompress.h
@@ -63,52 +63,86 @@ static inline void save_uart_address(void)
buf[0] = 0;
}
-/*
- * Setup before decompression. This is where we do UART selection for
- * earlyprintk and init the uart_base register.
- */
-static inline void arch_decomp_setup(void)
+static const struct {
+ u32 base;
+ u32 reset_reg;
+ u32 clock_reg;
+ u32 bit;
+} uarts[] = {
+ {
+ TEGRA_UARTA_BASE,
+ TEGRA_CLK_RESET_BASE + 0x04,
+ TEGRA_CLK_RESET_BASE + 0x10,
+ 6,
+ },
+ {
+ TEGRA_UARTB_BASE,
+ TEGRA_CLK_RESET_BASE + 0x04,
+ TEGRA_CLK_RESET_BASE + 0x10,
+ 7,
+ },
+ {
+ TEGRA_UARTC_BASE,
+ TEGRA_CLK_RESET_BASE + 0x08,
+ TEGRA_CLK_RESET_BASE + 0x14,
+ 23,
+ },
+ {
+ TEGRA_UARTD_BASE,
+ TEGRA_CLK_RESET_BASE + 0x0c,
+ TEGRA_CLK_RESET_BASE + 0x18,
+ 1,
+ },
+ {
+ TEGRA_UARTE_BASE,
+ TEGRA_CLK_RESET_BASE + 0x0c,
+ TEGRA_CLK_RESET_BASE + 0x18,
+ 2,
+ },
+};
+
+static inline bool uart_clocked(int i)
+{
+ if (*(u8 *)uarts[i].reset_reg & BIT(uarts[i].bit))
+ return false;
+
+ if (!(*(u8 *)uarts[i].clock_reg & BIT(uarts[i].bit)))
+ return false;
+
+ return true;
+}
+
+#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA
+int auto_odmdata(void)
+{
+ volatile u32 *pmc = (volatile u32 *)TEGRA_PMC_BASE;
+ u32 odmdata = pmc[0xa0 / 4];
+
+ /*
+ * Bits 19:18 are the console type: 0=default, 1=none, 2==DCC, 3==UART
+ * Some boards apparently swap the last two values, but we don't have
+ * any way of catering for that here, so we just accept either. If this
+ * doesn't make sense for your board, just don't enable this feature.
+ *
+ * Bits 17:15 indicate the UART to use, 0/1/2/3/4 are UART A/B/C/D/E.
+ */
+
+ switch ((odmdata >> 18) & 3) {
+ case 2:
+ case 3:
+ break;
+ default:
+ return -1;
+ }
+
+ return (odmdata >> 15) & 7;
+}
+#endif
+
+#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH
+int auto_scratch(void)
{
- static const struct {
- u32 base;
- u32 reset_reg;
- u32 clock_reg;
- u32 bit;
- } uarts[] = {
- {
- TEGRA_UARTA_BASE,
- TEGRA_CLK_RESET_BASE + 0x04,
- TEGRA_CLK_RESET_BASE + 0x10,
- 6,
- },
- {
- TEGRA_UARTB_BASE,
- TEGRA_CLK_RESET_BASE + 0x04,
- TEGRA_CLK_RESET_BASE + 0x10,
- 7,
- },
- {
- TEGRA_UARTC_BASE,
- TEGRA_CLK_RESET_BASE + 0x08,
- TEGRA_CLK_RESET_BASE + 0x14,
- 23,
- },
- {
- TEGRA_UARTD_BASE,
- TEGRA_CLK_RESET_BASE + 0x0c,
- TEGRA_CLK_RESET_BASE + 0x18,
- 1,
- },
- {
- TEGRA_UARTE_BASE,
- TEGRA_CLK_RESET_BASE + 0x0c,
- TEGRA_CLK_RESET_BASE + 0x18,
- 2,
- },
- };
int i;
- volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE;
- u32 chip, div;
/*
* Look for the first UART that:
@@ -125,20 +159,60 @@ static inline void arch_decomp_setup(void)
* back to what's specified in TEGRA_DEBUG_UART_BASE.
*/
for (i = 0; i < ARRAY_SIZE(uarts); i++) {
- if (*(u8 *)uarts[i].reset_reg & BIT(uarts[i].bit))
- continue;
-
- if (!(*(u8 *)uarts[i].clock_reg & BIT(uarts[i].bit)))
+ if (!uart_clocked(i))
continue;
uart = (volatile u8 *)uarts[i].base;
if (uart[UART_SCR << DEBUG_UART_SHIFT] != 'D')
continue;
- break;
+ return i;
}
- if (i == ARRAY_SIZE(uarts))
- uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE;
+
+ return -1;
+}
+#endif
+
+/*
+ * Setup before decompression. This is where we do UART selection for
+ * earlyprintk and init the uart_base register.
+ */
+static inline void arch_decomp_setup(void)
+{
+ int uart_id, auto_uart_id;
+ volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE;
+ u32 chip, div;
+
+#if defined(CONFIG_TEGRA_DEBUG_UARTA)
+ uart_id = 0;
+#elif defined(CONFIG_TEGRA_DEBUG_UARTB)
+ uart_id = 1;
+#elif defined(CONFIG_TEGRA_DEBUG_UARTC)
+ uart_id = 2;
+#elif defined(CONFIG_TEGRA_DEBUG_UARTD)
+ uart_id = 3;
+#elif defined(CONFIG_TEGRA_DEBUG_UARTE)
+ uart_id = 4;
+#else
+ uart_id = -1;
+#endif
+
+#if defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
+ auto_uart_id = auto_odmdata();
+#elif defined(CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH)
+ auto_uart_id = auto_scratch();
+#else
+ auto_uart_id = -1;
+#endif
+ if (auto_uart_id != -1)
+ uart_id = auto_uart_id;
+
+ if (uart_id < 0 || uart_id >= ARRAY_SIZE(uarts) ||
+ !uart_clocked(uart_id))
+ uart = NULL;
+ else
+ uart = (volatile u8 *)uarts[uart_id].base;
+
save_uart_address();
if (uart == NULL)
return;
diff --git a/arch/arm/mach-tegra/include/mach/usb_phy.h b/arch/arm/mach-tegra/include/mach/usb_phy.h
index de1a0f6..935ce9f 100644
--- a/arch/arm/mach-tegra/include/mach/usb_phy.h
+++ b/arch/arm/mach-tegra/include/mach/usb_phy.h
@@ -61,8 +61,8 @@ struct tegra_usb_phy {
struct usb_phy *ulpi;
};
-struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
- void *config, enum tegra_usb_phy_mode phy_mode);
+struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
+ void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode);
int tegra_usb_phy_power_on(struct tegra_usb_phy *phy);
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index bae09b8..b59315c 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -1486,6 +1486,10 @@ static struct clk tegra_clk_m = {
};
static struct clk_pll_freq_table tegra_pll_c_freq_table[] = {
+ { 12000000, 600000000, 600, 12, 1, 8 },
+ { 13000000, 600000000, 600, 13, 1, 8 },
+ { 19200000, 600000000, 500, 16, 1, 6 },
+ { 26000000, 600000000, 600, 26, 1, 8 },
{ 0, 0, 0, 0, 0, 0 },
};
diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c
index 6d08b53..e33fe4b 100644
--- a/arch/arm/mach-tegra/tegra30_clocks.c
+++ b/arch/arm/mach-tegra/tegra30_clocks.c
@@ -3015,6 +3015,15 @@ struct clk_duplicate tegra_clk_duplicates[] = {
CLK_DUPLICATE("sbc6", "spi_slave_tegra.5", NULL),
CLK_DUPLICATE("twd", "smp_twd", NULL),
CLK_DUPLICATE("vcp", "nvavp", "vcp"),
+ CLK_DUPLICATE("i2s0", NULL, "i2s0"),
+ CLK_DUPLICATE("i2s1", NULL, "i2s1"),
+ CLK_DUPLICATE("i2s2", NULL, "i2s2"),
+ CLK_DUPLICATE("i2s3", NULL, "i2s3"),
+ CLK_DUPLICATE("i2s4", NULL, "i2s4"),
+ CLK_DUPLICATE("dam0", NULL, "dam0"),
+ CLK_DUPLICATE("dam1", NULL, "dam1"),
+ CLK_DUPLICATE("dam2", NULL, "dam2"),
+ CLK_DUPLICATE("spdif_in", NULL, "spdif_in"),
};
struct clk *tegra_ptr_clks[] = {
diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c
index d71d2fe..54e353c 100644
--- a/arch/arm/mach-tegra/usb_phy.c
+++ b/arch/arm/mach-tegra/usb_phy.c
@@ -26,6 +26,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/of_gpio.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <asm/mach-types.h>
@@ -654,8 +655,8 @@ static void ulpi_phy_power_off(struct tegra_usb_phy *phy)
clk_disable(phy->clk);
}
-struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
- void *config, enum tegra_usb_phy_mode phy_mode)
+struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
+ void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode)
{
struct tegra_usb_phy *phy;
struct tegra_ulpi_config *ulpi_config;
@@ -711,6 +712,16 @@ struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
err = -ENXIO;
goto err1;
}
+ if (!gpio_is_valid(ulpi_config->reset_gpio))
+ ulpi_config->reset_gpio =
+ of_get_named_gpio(dev->of_node,
+ "nvidia,phy-reset-gpio", 0);
+ if (!gpio_is_valid(ulpi_config->reset_gpio)) {
+ pr_err("%s: invalid reset gpio: %d\n", __func__,
+ ulpi_config->reset_gpio);
+ err = -EINVAL;
+ goto err1;
+ }
gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b");
gpio_direction_output(ulpi_config->reset_gpio, 0);
phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
OpenPOWER on IntegriCloud