Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc clock driver changes from Olof Johansson:
 "The new clock subsystem was merged in linux-3.4 without any users,
  this now moves the first three platforms over to it: imx, mxs and
  spear.

  The series also contains the changes for the clock subsystem itself,
  since Mike preferred to have it together with the platforms that
  require these changes, in order to avoid interdependencies and
  conflicts."

Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code
removed in one branch, added OF support in another) and
drivers/dma/imx-sdma.c (independent changes next to each other).

* tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
  clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().
  clk: Provide dummy clk_unregister()
  SPEAr: Update defconfigs
  SPEAr: Add SMI NOR partition info in dts files
  SPEAr: Switch to common clock framework
  SPEAr: Call clk_prepare() before calling clk_enable
  SPEAr: clk: Add General Purpose Timer Synthesizer clock
  SPEAr: clk: Add Fractional Synthesizer clock
  SPEAr: clk: Add Auxiliary Synthesizer clock
  SPEAr: clk: Add VCO-PLL Synthesizer clock
  SPEAr: Add DT bindings for SPEAr's timer
  ARM i.MX: remove now unused clock files
  ARM: i.MX6: implement clocks using common clock framework
  ARM i.MX35: implement clocks using common clock framework
  ARM i.MX5: implement clocks using common clock framework
  ARM: Kirkwood: Replace clock gating
  ARM: Orion: Audio: Add clk/clkdev support
  ARM: Orion: PCIE: Add support for clk
  ARM: Orion: XOR: Add support for clk
  ARM: Orion: CESA: Add support for clk
  ...

7 files changed, 7 insertions, 799 deletions

diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile
index 76e5750..898831d 100644
--- a/arch/arm/mach-spear6xx/Makefile
+++ b/arch/arm/mach-spear6xx/Makefile
@@ -3,4 +3,4 @@
 #
 
 # common files
-obj-y	+= clock.o spear6xx.o
+obj-y	+= spear6xx.o
diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c
deleted file mode 100644
index bef77d4..0000000
--- a/arch/arm/mach-spear6xx/clock.c
+++ /dev/null
@@ -1,789 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/clock.c
- *
- * SPEAr6xx machines clock framework source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <plat/clock.h>
-#include <mach/misc_regs.h>
-#include <mach/spear.h>
-
-#define PLL1_CTR		(MISC_BASE + 0x008)
-#define PLL1_FRQ		(MISC_BASE + 0x00C)
-#define PLL1_MOD		(MISC_BASE + 0x010)
-#define PLL2_CTR		(MISC_BASE + 0x014)
-/* PLL_CTR register masks */
-#define PLL_ENABLE		2
-#define PLL_MODE_SHIFT		4
-#define PLL_MODE_MASK		0x3
-#define PLL_MODE_NORMAL		0
-#define PLL_MODE_FRACTION	1
-#define PLL_MODE_DITH_DSB	2
-#define PLL_MODE_DITH_SSB	3
-
-#define PLL2_FRQ		(MISC_BASE + 0x018)
-/* PLL FRQ register masks */
-#define PLL_DIV_N_SHIFT		0
-#define PLL_DIV_N_MASK		0xFF
-#define PLL_DIV_P_SHIFT		8
-#define PLL_DIV_P_MASK		0x7
-#define PLL_NORM_FDBK_M_SHIFT	24
-#define PLL_NORM_FDBK_M_MASK	0xFF
-#define PLL_DITH_FDBK_M_SHIFT	16
-#define PLL_DITH_FDBK_M_MASK	0xFFFF
-
-#define PLL2_MOD		(MISC_BASE + 0x01C)
-#define PLL_CLK_CFG		(MISC_BASE + 0x020)
-#define CORE_CLK_CFG		(MISC_BASE + 0x024)
-/* CORE CLK CFG register masks */
-#define PLL_HCLK_RATIO_SHIFT	10
-#define PLL_HCLK_RATIO_MASK	0x3
-#define HCLK_PCLK_RATIO_SHIFT	8
-#define HCLK_PCLK_RATIO_MASK	0x3
-
-#define PERIP_CLK_CFG		(MISC_BASE + 0x028)
-/* PERIP_CLK_CFG register masks */
-#define CLCD_CLK_SHIFT		2
-#define CLCD_CLK_MASK		0x3
-#define UART_CLK_SHIFT		4
-#define UART_CLK_MASK		0x1
-#define FIRDA_CLK_SHIFT		5
-#define FIRDA_CLK_MASK		0x3
-#define GPT0_CLK_SHIFT		8
-#define GPT1_CLK_SHIFT		10
-#define GPT2_CLK_SHIFT		11
-#define GPT3_CLK_SHIFT		12
-#define GPT_CLK_MASK		0x1
-#define AUX_CLK_PLL3_VAL	0
-#define AUX_CLK_PLL1_VAL	1
-
-#define PERIP1_CLK_ENB		(MISC_BASE + 0x02C)
-/* PERIP1_CLK_ENB register masks */
-#define UART0_CLK_ENB		3
-#define UART1_CLK_ENB		4
-#define SSP0_CLK_ENB		5
-#define SSP1_CLK_ENB		6
-#define I2C_CLK_ENB		7
-#define JPEG_CLK_ENB		8
-#define FSMC_CLK_ENB		9
-#define FIRDA_CLK_ENB		10
-#define GPT2_CLK_ENB		11
-#define GPT3_CLK_ENB		12
-#define GPIO2_CLK_ENB		13
-#define SSP2_CLK_ENB		14
-#define ADC_CLK_ENB		15
-#define GPT1_CLK_ENB		11
-#define RTC_CLK_ENB		17
-#define GPIO1_CLK_ENB		18
-#define DMA_CLK_ENB		19
-#define SMI_CLK_ENB		21
-#define CLCD_CLK_ENB		22
-#define GMAC_CLK_ENB		23
-#define USBD_CLK_ENB		24
-#define USBH0_CLK_ENB		25
-#define USBH1_CLK_ENB		26
-
-#define PRSC1_CLK_CFG		(MISC_BASE + 0x044)
-#define PRSC2_CLK_CFG		(MISC_BASE + 0x048)
-#define PRSC3_CLK_CFG		(MISC_BASE + 0x04C)
-/* gpt synthesizer register masks */
-#define GPT_MSCALE_SHIFT	0
-#define GPT_MSCALE_MASK		0xFFF
-#define GPT_NSCALE_SHIFT	12
-#define GPT_NSCALE_MASK		0xF
-
-#define AMEM_CLK_CFG		(MISC_BASE + 0x050)
-#define EXPI_CLK_CFG		(MISC_BASE + 0x054)
-#define CLCD_CLK_SYNT		(MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT		(MISC_BASE + 0x060)
-#define UART_CLK_SYNT		(MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT		(MISC_BASE + 0x068)
-#define RAS1_CLK_SYNT		(MISC_BASE + 0x06C)
-#define RAS2_CLK_SYNT		(MISC_BASE + 0x070)
-#define RAS3_CLK_SYNT		(MISC_BASE + 0x074)
-#define RAS4_CLK_SYNT		(MISC_BASE + 0x078)
-/* aux clk synthesiser register masks for irda to ras4 */
-#define AUX_SYNT_ENB		31
-#define AUX_EQ_SEL_SHIFT	30
-#define AUX_EQ_SEL_MASK		1
-#define AUX_EQ1_SEL		0
-#define AUX_EQ2_SEL		1
-#define AUX_XSCALE_SHIFT	16
-#define AUX_XSCALE_MASK		0xFFF
-#define AUX_YSCALE_SHIFT	0
-#define AUX_YSCALE_MASK		0xFFF
-
-/* root clks */
-/* 32 KHz oscillator clock */
-static struct clk osc_32k_clk = {
-	.flags = ALWAYS_ENABLED,
-	.rate = 32000,
-};
-
-/* 30 MHz oscillator clock */
-static struct clk osc_30m_clk = {
-	.flags = ALWAYS_ENABLED,
-	.rate = 30000000,
-};
-
-/* clock derived from 32 KHz osc clk */
-/* rtc clock */
-static struct clk rtc_clk = {
-	.pclk = &osc_32k_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = RTC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from 30 MHz osc clk */
-/* pll masks structure */
-static struct pll_clk_masks pll1_masks = {
-	.mode_mask = PLL_MODE_MASK,
-	.mode_shift = PLL_MODE_SHIFT,
-	.norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
-	.norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
-	.dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
-	.dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
-	.div_p_mask = PLL_DIV_P_MASK,
-	.div_p_shift = PLL_DIV_P_SHIFT,
-	.div_n_mask = PLL_DIV_N_MASK,
-	.div_n_shift = PLL_DIV_N_SHIFT,
-};
-
-/* pll1 configuration structure */
-static struct pll_clk_config pll1_config = {
-	.mode_reg = PLL1_CTR,
-	.cfg_reg = PLL1_FRQ,
-	.masks = &pll1_masks,
-};
-
-/* pll rate configuration table, in ascending order of rates */
-struct pll_rate_tbl pll_rtbl[] = {
-	{.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
-	{.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
-};
-
-/* PLL1 clock */
-static struct clk pll1_clk = {
-	.flags = ENABLED_ON_INIT,
-	.pclk = &osc_30m_clk,
-	.en_reg = PLL1_CTR,
-	.en_reg_bit = PLL_ENABLE,
-	.calc_rate = &pll_calc_rate,
-	.recalc = &pll_clk_recalc,
-	.set_rate = &pll_clk_set_rate,
-	.rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
-	.private_data = &pll1_config,
-};
-
-/* PLL3 48 MHz clock */
-static struct clk pll3_48m_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &osc_30m_clk,
-	.rate = 48000000,
-};
-
-/* watch dog timer clock */
-static struct clk wdt_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &osc_30m_clk,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from pll1 clk */
-/* cpu clock */
-static struct clk cpu_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.recalc = &follow_parent,
-};
-
-/* ahb masks structure */
-static struct bus_clk_masks ahb_masks = {
-	.mask = PLL_HCLK_RATIO_MASK,
-	.shift = PLL_HCLK_RATIO_SHIFT,
-};
-
-/* ahb configuration structure */
-static struct bus_clk_config ahb_config = {
-	.reg = CORE_CLK_CFG,
-	.masks = &ahb_masks,
-};
-
-/* ahb rate configuration table, in ascending order of rates */
-struct bus_rate_tbl bus_rtbl[] = {
-	{.div = 3}, /* == parent divided by 4 */
-	{.div = 2}, /* == parent divided by 3 */
-	{.div = 1}, /* == parent divided by 2 */
-	{.div = 0}, /* == parent divided by 1 */
-};
-
-/* ahb clock */
-static struct clk ahb_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &bus_calc_rate,
-	.recalc = &bus_clk_recalc,
-	.set_rate = &bus_clk_set_rate,
-	.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
-	.private_data = &ahb_config,
-};
-
-/* auxiliary synthesizers masks */
-static struct aux_clk_masks aux_masks = {
-	.eq_sel_mask = AUX_EQ_SEL_MASK,
-	.eq_sel_shift = AUX_EQ_SEL_SHIFT,
-	.eq1_mask = AUX_EQ1_SEL,
-	.eq2_mask = AUX_EQ2_SEL,
-	.xscale_sel_mask = AUX_XSCALE_MASK,
-	.xscale_sel_shift = AUX_XSCALE_SHIFT,
-	.yscale_sel_mask = AUX_YSCALE_MASK,
-	.yscale_sel_shift = AUX_YSCALE_SHIFT,
-};
-
-/* uart configurations */
-static struct aux_clk_config uart_synth_config = {
-	.synth_reg = UART_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* aux rate configuration table, in ascending order of rates */
-struct aux_rate_tbl aux_rtbl[] = {
-	/* For PLL1 = 332 MHz */
-	{.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
-	{.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
-	{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
-};
-
-/* uart synth clock */
-static struct clk uart_synth_clk = {
-	.en_reg = UART_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
-	.private_data = &uart_synth_config,
-};
-
-/* uart parents */
-static struct pclk_info uart_pclk_info[] = {
-	{
-		.pclk = &uart_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* uart parent select structure */
-static struct pclk_sel uart_pclk_sel = {
-	.pclk_info = uart_pclk_info,
-	.pclk_count = ARRAY_SIZE(uart_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = UART_CLK_MASK,
-};
-
-/* uart0 clock */
-static struct clk uart0_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = UART0_CLK_ENB,
-	.pclk_sel = &uart_pclk_sel,
-	.pclk_sel_shift = UART_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* uart1 clock */
-static struct clk uart1_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = UART1_CLK_ENB,
-	.pclk_sel = &uart_pclk_sel,
-	.pclk_sel_shift = UART_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* firda configurations */
-static struct aux_clk_config firda_synth_config = {
-	.synth_reg = FIRDA_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk firda_synth_clk = {
-	.en_reg = FIRDA_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
-	.private_data = &firda_synth_config,
-};
-
-/* firda parents */
-static struct pclk_info firda_pclk_info[] = {
-	{
-		.pclk = &firda_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* firda parent select structure */
-static struct pclk_sel firda_pclk_sel = {
-	.pclk_info = firda_pclk_info,
-	.pclk_count = ARRAY_SIZE(firda_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = FIRDA_CLK_MASK,
-};
-
-/* firda clock */
-static struct clk firda_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = FIRDA_CLK_ENB,
-	.pclk_sel = &firda_pclk_sel,
-	.pclk_sel_shift = FIRDA_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* clcd configurations */
-static struct aux_clk_config clcd_synth_config = {
-	.synth_reg = CLCD_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk clcd_synth_clk = {
-	.en_reg = CLCD_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
-	.private_data = &clcd_synth_config,
-};
-
-/* clcd parents */
-static struct pclk_info clcd_pclk_info[] = {
-	{
-		.pclk = &clcd_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* clcd parent select structure */
-static struct pclk_sel clcd_pclk_sel = {
-	.pclk_info = clcd_pclk_info,
-	.pclk_count = ARRAY_SIZE(clcd_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = CLCD_CLK_MASK,
-};
-
-/* clcd clock */
-static struct clk clcd_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = CLCD_CLK_ENB,
-	.pclk_sel = &clcd_pclk_sel,
-	.pclk_sel_shift = CLCD_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt synthesizer masks */
-static struct gpt_clk_masks gpt_masks = {
-	.mscale_sel_mask = GPT_MSCALE_MASK,
-	.mscale_sel_shift = GPT_MSCALE_SHIFT,
-	.nscale_sel_mask = GPT_NSCALE_MASK,
-	.nscale_sel_shift = GPT_NSCALE_SHIFT,
-};
-
-/* gpt rate configuration table, in ascending order of rates */
-struct gpt_rate_tbl gpt_rtbl[] = {
-	/* For pll1 = 332 MHz */
-	{.mscale = 4, .nscale = 0}, /* 41.5 MHz */
-	{.mscale = 2, .nscale = 0}, /* 55.3 MHz */
-	{.mscale = 1, .nscale = 0}, /* 83 MHz */
-};
-
-/* gpt0 synth clk config*/
-static struct gpt_clk_config gpt0_synth_config = {
-	.synth_reg = PRSC1_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt0_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt0_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt0_pclk_info[] = {
-	{
-		.pclk = &gpt0_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt0_pclk_sel = {
-	.pclk_info = gpt0_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt0_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt0 ARM1 subsystem timer clock */
-static struct clk gpt0_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt0_pclk_sel,
-	.pclk_sel_shift = GPT0_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-
-/* Note: gpt0 and gpt1 share same parent clocks */
-/* gpt parent select structure */
-static struct pclk_sel gpt1_pclk_sel = {
-	.pclk_info = gpt0_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt0_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt1 timer clock */
-static struct clk gpt1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt1_pclk_sel,
-	.pclk_sel_shift = GPT1_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt2 synth clk config*/
-static struct gpt_clk_config gpt2_synth_config = {
-	.synth_reg = PRSC2_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt2_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt2_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt2_pclk_info[] = {
-	{
-		.pclk = &gpt2_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt2_pclk_sel = {
-	.pclk_info = gpt2_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt2_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt2 timer clock */
-static struct clk gpt2_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt2_pclk_sel,
-	.pclk_sel_shift = GPT2_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt3 synth clk config*/
-static struct gpt_clk_config gpt3_synth_config = {
-	.synth_reg = PRSC3_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt3_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt3_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt3_pclk_info[] = {
-	{
-		.pclk = &gpt3_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt3_pclk_sel = {
-	.pclk_info = gpt3_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt3_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt3 timer clock */
-static struct clk gpt3_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt3_pclk_sel,
-	.pclk_sel_shift = GPT3_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from pll3 clk */
-/* usbh0 clock */
-static struct clk usbh0_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBH0_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* usbh1 clock */
-static struct clk usbh1_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBH1_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* usbd clock */
-static struct clk usbd_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBD_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from ahb clk */
-/* apb masks structure */
-static struct bus_clk_masks apb_masks = {
-	.mask = HCLK_PCLK_RATIO_MASK,
-	.shift = HCLK_PCLK_RATIO_SHIFT,
-};
-
-/* apb configuration structure */
-static struct bus_clk_config apb_config = {
-	.reg = CORE_CLK_CFG,
-	.masks = &apb_masks,
-};
-
-/* apb clock */
-static struct clk apb_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.calc_rate = &bus_calc_rate,
-	.recalc = &bus_clk_recalc,
-	.set_rate = &bus_clk_set_rate,
-	.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
-	.private_data = &apb_config,
-};
-
-/* i2c clock */
-static struct clk i2c_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = I2C_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* dma clock */
-static struct clk dma_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = DMA_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* jpeg clock */
-static struct clk jpeg_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = JPEG_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gmac clock */
-static struct clk gmac_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GMAC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* smi clock */
-static struct clk smi_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SMI_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* fsmc clock */
-static struct clk fsmc_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = FSMC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from apb clk */
-/* adc clock */
-static struct clk adc_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = ADC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* ssp0 clock */
-static struct clk ssp0_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SSP0_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* ssp1 clock */
-static struct clk ssp1_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SSP1_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* ssp2 clock */
-static struct clk ssp2_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SSP2_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gpio0 ARM subsystem clock */
-static struct clk gpio0_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* gpio1 clock */
-static struct clk gpio1_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPIO1_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gpio2 clock */
-static struct clk gpio2_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPIO2_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-static struct clk dummy_apb_pclk;
-
-/* array of all spear 6xx clock lookups */
-static struct clk_lookup spear_clk_lookups[] = {
-	CLKDEV_INIT(NULL, "apb_pclk", &dummy_apb_pclk),
-	/* root clks */
-	CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk),
-	CLKDEV_INIT(NULL, "osc_30m_clk", &osc_30m_clk),
-	/* clock derived from 32 KHz os		 clk */
-	CLKDEV_INIT("rtc-spear", NULL, &rtc_clk),
-	/* clock derived from 30 MHz os		 clk */
-	CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk),
-	CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk),
-	CLKDEV_INIT("wdt", NULL, &wdt_clk),
-	/* clock derived from pll1 clk */
-	CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk),
-	CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk),
-	CLKDEV_INIT(NULL, "uart_synth_clk", &uart_synth_clk),
-	CLKDEV_INIT(NULL, "firda_synth_clk", &firda_synth_clk),
-	CLKDEV_INIT(NULL, "clcd_synth_clk", &clcd_synth_clk),
-	CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk),
-	CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk),
-	CLKDEV_INIT(NULL, "gpt3_synth_clk", &gpt3_synth_clk),
-	CLKDEV_INIT("d0000000.serial", NULL, &uart0_clk),
-	CLKDEV_INIT("d0080000.serial", NULL, &uart1_clk),
-	CLKDEV_INIT("firda", NULL, &firda_clk),
-	CLKDEV_INIT("clcd", NULL, &clcd_clk),
-	CLKDEV_INIT("gpt0", NULL, &gpt0_clk),
-	CLKDEV_INIT("gpt1", NULL, &gpt1_clk),
-	CLKDEV_INIT("gpt2", NULL, &gpt2_clk),
-	CLKDEV_INIT("gpt3", NULL, &gpt3_clk),
-	/* clock derived from pll3 clk */
-	CLKDEV_INIT("designware_udc", NULL, &usbd_clk),
-	CLKDEV_INIT(NULL, "usbh.0_clk", &usbh0_clk),
-	CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk),
-	/* clock derived from ahb clk */
-	CLKDEV_INIT(NULL, "apb_clk", &apb_clk),
-	CLKDEV_INIT("d0200000.i2c", NULL, &i2c_clk),
-	CLKDEV_INIT("fc400000.dma", NULL, &dma_clk),
-	CLKDEV_INIT("jpeg", NULL, &jpeg_clk),
-	CLKDEV_INIT("gmac", NULL, &gmac_clk),
-	CLKDEV_INIT("fc000000.flash", NULL, &smi_clk),
-	CLKDEV_INIT("d1800000.flash", NULL, &fsmc_clk),
-	/* clock derived from apb clk */
-	CLKDEV_INIT("adc", NULL, &adc_clk),
-	CLKDEV_INIT("ssp-pl022.0", NULL, &ssp0_clk),
-	CLKDEV_INIT("ssp-pl022.1", NULL, &ssp1_clk),
-	CLKDEV_INIT("ssp-pl022.2", NULL, &ssp2_clk),
-	CLKDEV_INIT("f0100000.gpio", NULL, &gpio0_clk),
-	CLKDEV_INIT("fc980000.gpio", NULL, &gpio1_clk),
-	CLKDEV_INIT("d8100000.gpio", NULL, &gpio2_clk),
-};
-
-void __init spear6xx_clk_init(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
-		clk_register(&spear_clk_lookups[i]);
-
-	clk_init();
-}
diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h
index 7167fd3..65514b15 100644
--- a/arch/arm/mach-spear6xx/include/mach/generic.h
+++ b/arch/arm/mach-spear6xx/include/mach/generic.h
@@ -16,7 +16,7 @@
 
 #include <linux/init.h>
 
-void __init spear_setup_timer(resource_size_t base, int irq);
+void __init spear_setup_of_timer(void);
 void spear_restart(char, const char *);
 void __init spear6xx_clk_init(void);
 
diff --git a/arch/arm/mach-spear6xx/include/mach/irqs.h b/arch/arm/mach-spear6xx/include/mach/irqs.h
index 2b73538..37a5c41 100644
--- a/arch/arm/mach-spear6xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear6xx/include/mach/irqs.h
@@ -16,9 +16,6 @@
 
 /* IRQ definitions */
 /* VIC 1 */
-/* FIXME: probe this from DT */
-#define IRQ_CPU_GPT1_1				16
-
 #define IRQ_VIC_END				64
 
 /* GPIO pins virtual irqs */
diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
index 2b9aaa6..179e457 100644
--- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
@@ -14,6 +14,8 @@
 #ifndef __MACH_MISC_REGS_H
 #define __MACH_MISC_REGS_H
 
+#include <mach/spear.h>
+
 #define MISC_BASE		IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE)
 #define DMA_CHN_CFG		(MISC_BASE + 0x0A0)
 
diff --git a/arch/arm/mach-spear6xx/include/mach/spear.h b/arch/arm/mach-spear6xx/include/mach/spear.h
index d278ed0..cb8ed2f 100644
--- a/arch/arm/mach-spear6xx/include/mach/spear.h
+++ b/arch/arm/mach-spear6xx/include/mach/spear.h
@@ -25,7 +25,6 @@
 /* ML-1, 2 - Multi Layer CPU Subsystem */
 #define SPEAR6XX_ML_CPU_BASE		UL(0xF0000000)
 #define VA_SPEAR6XX_ML_CPU_BASE		UL(0xF0000000)
-#define SPEAR6XX_CPU_TMR_BASE		UL(0xF0000000)
 
 /* ICM3 - Basic Subsystem */
 #define SPEAR6XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index de194db..2e2e359 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -419,9 +419,6 @@ struct map_desc spear6xx_io_desc[] __initdata = {
 void __init spear6xx_map_io(void)
 {
 	iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc));
-
-	/* This will initialize clock framework */
-	spear6xx_clk_init();
 }
 
 static void __init spear6xx_timer_init(void)
@@ -429,6 +426,8 @@ static void __init spear6xx_timer_init(void)
 	char pclk_name[] = "pll3_48m_clk";
 	struct clk *gpt_clk, *pclk;
 
+	spear6xx_clk_init();
+
 	/* get the system timer clock */
 	gpt_clk = clk_get_sys("gpt0", NULL);
 	if (IS_ERR(gpt_clk)) {
@@ -448,7 +447,7 @@ static void __init spear6xx_timer_init(void)
 	clk_put(gpt_clk);
 	clk_put(pclk);
 
-	spear_setup_timer(SPEAR6XX_CPU_TMR_BASE, IRQ_CPU_GPT1_1);
+	spear_setup_of_timer();
 }
 
 struct sys_timer spear6xx_timer = {