summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-shmobile
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2014-11-19 22:02:48 +0100
committerArnd Bergmann <arnd@arndb.de>2014-11-19 22:02:48 +0100
commitc39bacad19b0e4762508cb974a34f0ded67145e4 (patch)
treeb5f90b2ef604ef58126547830ee1934f989f0c39 /arch/arm/mach-shmobile
parent15fee17dbad630e38a6ce441e368ed758cb34b35 (diff)
parent3794705aeb318c431c07072f04380c78cc5a84ac (diff)
downloadop-kernel-dev-c39bacad19b0e4762508cb974a34f0ded67145e4.zip
op-kernel-dev-c39bacad19b0e4762508cb974a34f0ded67145e4.tar.gz
Merge tag 'renesas-soc-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Pull "Renesas ARM Based SoC Soc Updates for v3.19" from Simon Horman: * Select CONFIG_ZONE_DMA when CONFIG_ARM_LPAE is enabled * Add CA7 arch_timer initialization for r8a7794 * Handle CA7 arch timer delay * Add shmobile_init_late() to sh7372 - This is consistent with other shmobile SoCs * tag 'renesas-soc-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: Select CONFIG_ZONE_DMA when CONFIG_ARM_LPAE is enabled ARM: shmobile: rcar-gen2: Add CA7 arch_timer initialization for r8a7794 ARM: shmobile: sh7372: Add shmobile_init_late() ARM: shmobile: Handle CA7 arch timer delay Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm/mach-shmobile')
-rw-r--r--arch/arm/mach-shmobile/Kconfig1
-rw-r--r--arch/arm/mach-shmobile/setup-rcar-gen2.c72
-rw-r--r--arch/arm/mach-shmobile/setup-sh7372.c1
-rw-r--r--arch/arm/mach-shmobile/timer.c23
4 files changed, 66 insertions, 31 deletions
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 21f457b..6bc018f 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,5 +1,6 @@
config ARCH_SHMOBILE
bool
+ select ZONE_DMA if ARM_LPAE
config PM_RCAR
bool
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 42d5b43..7ed9279 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
+ * Copyright (C) 2014 Ulrich Hecht
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -24,6 +25,7 @@
#include <linux/dma-contiguous.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/of.h>
#include <linux/of_fdt.h>
#include <asm/mach/arch.h>
#include "common.h"
@@ -54,37 +56,61 @@ void __init rcar_gen2_timer_init(void)
{
#if defined(CONFIG_ARM_ARCH_TIMER) || defined(CONFIG_COMMON_CLK)
u32 mode = rcar_gen2_read_mode_pins();
+ bool is_e2 = (bool)of_find_compatible_node(NULL, NULL,
+ "renesas,r8a7794");
#endif
#ifdef CONFIG_ARM_ARCH_TIMER
void __iomem *base;
int extal_mhz = 0;
u32 freq;
- /* At Linux boot time the r8a7790 arch timer comes up
- * with the counter disabled. Moreover, it may also report
- * a potentially incorrect fixed 13 MHz frequency. To be
- * correct these registers need to be updated to use the
- * frequency EXTAL / 2 which can be determined by the MD pins.
- */
-
- switch (mode & (MD(14) | MD(13))) {
- case 0:
- extal_mhz = 15;
- break;
- case MD(13):
- extal_mhz = 20;
- break;
- case MD(14):
- extal_mhz = 26;
- break;
- case MD(13) | MD(14):
- extal_mhz = 30;
- break;
+ if (is_e2) {
+ freq = 260000000 / 8; /* ZS / 8 */
+ /* CNTVOFF has to be initialized either from non-secure
+ * Hypervisor mode or secure Monitor mode with SCR.NS==1.
+ * If TrustZone is enabled then it should be handled by the
+ * secure code.
+ */
+ asm volatile(
+ " cps 0x16\n"
+ " mrc p15, 0, r1, c1, c1, 0\n"
+ " orr r0, r1, #1\n"
+ " mcr p15, 0, r0, c1, c1, 0\n"
+ " isb\n"
+ " mov r0, #0\n"
+ " mcrr p15, 4, r0, r0, c14\n"
+ " isb\n"
+ " mcr p15, 0, r1, c1, c1, 0\n"
+ " isb\n"
+ " cps 0x13\n"
+ : : : "r0", "r1");
+ } else {
+ /* At Linux boot time the r8a7790 arch timer comes up
+ * with the counter disabled. Moreover, it may also report
+ * a potentially incorrect fixed 13 MHz frequency. To be
+ * correct these registers need to be updated to use the
+ * frequency EXTAL / 2 which can be determined by the MD pins.
+ */
+
+ switch (mode & (MD(14) | MD(13))) {
+ case 0:
+ extal_mhz = 15;
+ break;
+ case MD(13):
+ extal_mhz = 20;
+ break;
+ case MD(14):
+ extal_mhz = 26;
+ break;
+ case MD(13) | MD(14):
+ extal_mhz = 30;
+ break;
+ }
+
+ /* The arch timer frequency equals EXTAL / 2 */
+ freq = extal_mhz * (1000000 / 2);
}
- /* The arch timer frequency equals EXTAL / 2 */
- freq = extal_mhz * (1000000 / 2);
-
/* Remap "armgcnt address map" space */
base = ioremap(0xe6080000, PAGE_SIZE);
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index d646c8d..769ff00 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -1012,6 +1012,7 @@ DT_MACHINE_START(SH7372_DT, "Generic SH7372 (Flattened Device Tree)")
.init_irq = sh7372_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = sh7372_add_standard_devices_dt,
+ .init_late = shmobile_init_late,
.dt_compat = sh7372_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 87c6be1..32ee335 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -45,6 +45,7 @@ void __init shmobile_init_delay(void)
struct device_node *np, *cpus;
bool is_a7_a8_a9 = false;
bool is_a15 = false;
+ bool has_arch_timer = false;
u32 max_freq = 0;
cpus = of_find_node_by_path("/cpus");
@@ -57,12 +58,16 @@ void __init shmobile_init_delay(void)
if (!of_property_read_u32(np, "clock-frequency", &freq))
max_freq = max(max_freq, freq);
- if (of_device_is_compatible(np, "arm,cortex-a7") ||
- of_device_is_compatible(np, "arm,cortex-a8") ||
- of_device_is_compatible(np, "arm,cortex-a9"))
+ if (of_device_is_compatible(np, "arm,cortex-a8") ||
+ of_device_is_compatible(np, "arm,cortex-a9")) {
is_a7_a8_a9 = true;
- else if (of_device_is_compatible(np, "arm,cortex-a15"))
+ } else if (of_device_is_compatible(np, "arm,cortex-a7")) {
+ is_a7_a8_a9 = true;
+ has_arch_timer = true;
+ } else if (of_device_is_compatible(np, "arm,cortex-a15")) {
is_a15 = true;
+ has_arch_timer = true;
+ }
}
of_node_put(cpus);
@@ -70,10 +75,12 @@ void __init shmobile_init_delay(void)
if (!max_freq)
return;
- if (is_a7_a8_a9)
- shmobile_setup_delay_hz(max_freq, 1, 3);
- else if (is_a15 && !IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
- shmobile_setup_delay_hz(max_freq, 2, 4);
+ if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) {
+ if (is_a7_a8_a9)
+ shmobile_setup_delay_hz(max_freq, 1, 3);
+ else if (is_a15)
+ shmobile_setup_delay_hz(max_freq, 2, 4);
+ }
}
static void __init shmobile_late_time_init(void)
OpenPOWER on IntegriCloud