Merge tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late changes from Arnd Bergmann:
 "These are changes that arrived a little late before the merge window
  or that have multiple dependencies on previous branches so they did
  not fit into one of the earlier ones.  There are 10 branches merged
  here, a total of 39 non-merge commits.  Contents are a mixed bag for
  the above reasons:

   * Two new SoC platforms: ST microelectronics stixxxx and the TI
     'Nspire' graphing calculator.  These should have been in the 'soc'
     branch but were a little late
   * Support for the Exynos 5420 variant in mach-exynos, which is based
     on the other exynos branches to avoid conflicts.
   * Various small changes for sh-mobile, ux500 and davinci
   * Common clk support for MSM"

* tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  ARM: ux500: bail out on alien cpus
  ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins
  serial: sh-sci: Initialise variables before access in sci_set_termios()
  ARM: stih41x: Add B2020 board support
  ARM: stih41x: Add B2000 board support
  ARM: sti: Add DEBUG_LL console support
  ARM: sti: Add STiH416 SOC support
  ARM: sti: Add STiH415 SOC support
  ARM: msm: Migrate to common clock framework
  ARM: msm: Make proc_comm clock control into a platform driver
  ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver
  ARM: msm: Remove clock-7x30.h include file
  ARM: msm: Remove custom clk_set_{max,min}_rate() API
  ARM: msm: Remove custom clk_set_flags() API
  msm: iommu: Use clk_set_rate() instead of clk_set_min_rate()
  msm: iommu: Convert to clk_prepare/unprepare
  msm_sdcc: Convert to clk_prepare/unprepare
  usb: otg: msm: Convert to clk_prepare/unprepare
  msm_serial: Use devm_clk_get() and properly return errors
  msm_serial: Convert to clk_prepare/unprepare
  ...

1 files changed, 20 insertions, 8 deletions

diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index b461d93..28f9475 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -30,17 +30,17 @@
 #include <mach/r8a7790.h>
 #include <asm/mach/arch.h>
 
-static const struct resource pfc_resources[] = {
+static struct resource pfc_resources[] __initdata = {
 	DEFINE_RES_MEM(0xe6060000, 0x250),
 };
 
 #define R8A7790_GPIO(idx)						\
-static struct resource r8a7790_gpio##idx##_resources[] = {		\
+static struct resource r8a7790_gpio##idx##_resources[] __initdata = {	\
 	DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50),		\
 	DEFINE_RES_IRQ(gic_spi(4 + (idx))),				\
 };									\
 									\
-static struct gpio_rcar_config r8a7790_gpio##idx##_platform_data = {	\
+static struct gpio_rcar_config r8a7790_gpio##idx##_platform_data __initdata = {	\
 	.gpio_base	= 32 * (idx),					\
 	.irq_base	= 0,						\
 	.number_of_pins	= 32,						\
@@ -98,12 +98,20 @@ void __init r8a7790_pinmux_init(void)
 [index] = {						\
 	SCIF_COMMON(PORT_SCIF, baseaddr, irq),		\
 	.scbrr_algo_id	= SCBRR_ALGO_2,			\
-	.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
 }
 
-enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1 };
+#define HSCIF_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_HSCIF, baseaddr, irq),		\
+	.scbrr_algo_id	= SCBRR_ALGO_6,			\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
+}
+
+enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
+       HSCIF0, HSCIF1 };
 
-static const struct plat_sci_port scif[] = {
+static struct plat_sci_port scif[] __initdata = {
 	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
 	SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
 	SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
@@ -112,6 +120,8 @@ static const struct plat_sci_port scif[] = {
 	SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
 	SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
 	SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
+	HSCIF_DATA(HSCIF0, 0xe62c0000, gic_spi(154)), /* HSCIF0 */
+	HSCIF_DATA(HSCIF1, 0xe62c8000, gic_spi(155)), /* HSCIF1 */
 };
 
 static inline void r8a7790_register_scif(int idx)
@@ -120,11 +130,11 @@ static inline void r8a7790_register_scif(int idx)
 				      sizeof(struct plat_sci_port));
 }
 
-static struct renesas_irqc_config irqc0_data = {
+static struct renesas_irqc_config irqc0_data __initdata = {
 	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
 };
 
-static struct resource irqc0_resources[] = {
+static struct resource irqc0_resources[] __initdata = {
 	DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
 	DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
 	DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
@@ -149,6 +159,8 @@ void __init r8a7790_add_standard_devices(void)
 	r8a7790_register_scif(SCIFA2);
 	r8a7790_register_scif(SCIF0);
 	r8a7790_register_scif(SCIF1);
+	r8a7790_register_scif(HSCIF0);
+	r8a7790_register_scif(HSCIF1);
 	r8a7790_register_irqc(0);
 }