diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-11-11 16:49:45 +0900 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-11-11 16:49:45 +0900 |
commit | aac59e3efce3dca787b11e34726001603ce3d161 (patch) | |
tree | 855d3f967b102877a179e23382be3c2c7fc8d66c /arch/arm/mach-shmobile/setup-r8a7778.c | |
parent | 21604cdcdcf9ea8c16b1656f78e2eff097244d66 (diff) | |
parent | 005ff5fb077ebf93882bd643932f932a9b402529 (diff) | |
download | op-kernel-dev-aac59e3efce3dca787b11e34726001603ce3d161.zip op-kernel-dev-aac59e3efce3dca787b11e34726001603ce3d161.tar.gz |
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform changes from Olof Johansson:
"New and updated SoC support. Among the things new for this release
are:
- More support for the AM33xx platforms from TI
- Tegra 124 support, and some updates to older tegra families as well
- imx cleanups and updates across the board
- A rename of Broadcom's Mobile platforms which were introduced as
ARCH_BCM, and turned out to be too broad a name. New name is
ARCH_BCM_MOBILE.
- A whole bunch of updates and fixes for integrator, making the
platform code more modern and switches over to DT-only booting.
- Support for two new Renesas shmobile chipsets. Next up for them is
more work on consolidation instead of introduction of new
non-multiplatform SoCs, we're all looking forward to that!
- Misc cleanups for older Samsung platforms, some Allwinner updates,
etc"
* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits)
ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config
ARM: bcm_defconfig: Run "make savedefconfig"
ARM: bcm281xx: Add ARCH Timers to config
rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm)
ARM: vexpress: Enable platform-specific options in defconfig
ARM: vexpress: Make defconfig work again
ARM: sunxi: remove .init_time hooks
ARM: imx: enable suspend for imx6sl
ARM: imx: ensure dsm_request signal is not asserted when setting LPM
ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter()
ARM: imx6q: move low-power code out of clock driver
ARM: imx: drop extern with function prototypes in common.h
ARM: imx: reset core along with enable/disable operation
ARM: imx: do not return from imx_cpu_die() call
ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING
ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options
ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO
ARM: imx: replace imx6q_restart() with mxc_restart()
ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt
ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt
...
Diffstat (limited to 'arch/arm/mach-shmobile/setup-r8a7778.c')
-rw-r--r-- | arch/arm/mach-shmobile/setup-r8a7778.c | 128 |
1 files changed, 116 insertions, 12 deletions
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 468ee65..03fcc59 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -24,6 +24,7 @@ #include <linux/irqchip/arm-gic.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/platform_data/dma-rcar-hpbdma.h> #include <linux/platform_data/gpio-rcar.h> #include <linux/platform_data/irq-renesas-intc-irqpin.h> #include <linux/platform_device.h> @@ -95,29 +96,46 @@ static struct sh_timer_config sh_tmu1_platform_data __initdata = { &sh_tmu##idx##_platform_data, \ sizeof(sh_tmu##idx##_platform_data)) -/* USB */ -static struct usb_phy *phy; +int r8a7778_usb_phy_power(bool enable) +{ + static struct usb_phy *phy = NULL; + int ret = 0; + + if (!phy) + phy = usb_get_phy(USB_PHY_TYPE_USB2); + + if (IS_ERR(phy)) { + pr_err("kernel doesn't have usb phy driver\n"); + return PTR_ERR(phy); + } + + if (enable) + ret = usb_phy_init(phy); + else + usb_phy_shutdown(phy); + return ret; +} + +/* USB */ static int usb_power_on(struct platform_device *pdev) { - if (IS_ERR(phy)) - return PTR_ERR(phy); + int ret = r8a7778_usb_phy_power(true); + + if (ret) + return ret; pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); - usb_phy_init(phy); - return 0; } static void usb_power_off(struct platform_device *pdev) { - if (IS_ERR(phy)) + if (r8a7778_usb_phy_power(false)) return; - usb_phy_shutdown(phy); - pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); } @@ -291,6 +309,88 @@ void __init r8a7778_add_dt_devices(void) r8a7778_register_tmu(1); } +/* HPB-DMA */ + +/* Asynchronous mode register (ASYNCMDR) bits */ +#define HPB_DMAE_ASYNCMDR_ASMD22_MASK BIT(2) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE BIT(2) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI 0 /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD21_MASK BIT(1) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE BIT(1) /* SDHI0 */ +#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI 0 /* SDHI0 */ + +static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = { + { + .id = HPBDMA_SLAVE_SDHI0_TX, + .addr = 0xffe4c000 + 0x30, + .dcr = HPB_DMAE_DCR_SPDS_16BIT | + HPB_DMAE_DCR_DMDL | + HPB_DMAE_DCR_DPDS_16BIT, + .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 | + HPB_DMAE_ASYNCRSTR_ASRST22 | + HPB_DMAE_ASYNCRSTR_ASRST23, + .mdr = HPB_DMAE_ASYNCMDR_ASMD21_MULTI, + .mdm = HPB_DMAE_ASYNCMDR_ASMD21_MASK, + .port = 0x0D0C, + .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE, + .dma_ch = 21, + }, { + .id = HPBDMA_SLAVE_SDHI0_RX, + .addr = 0xffe4c000 + 0x30, + .dcr = HPB_DMAE_DCR_SMDL | + HPB_DMAE_DCR_SPDS_16BIT | + HPB_DMAE_DCR_DPDS_16BIT, + .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 | + HPB_DMAE_ASYNCRSTR_ASRST22 | + HPB_DMAE_ASYNCRSTR_ASRST23, + .mdr = HPB_DMAE_ASYNCMDR_ASMD22_MULTI, + .mdm = HPB_DMAE_ASYNCMDR_ASMD22_MASK, + .port = 0x0D0C, + .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE, + .dma_ch = 22, + }, +}; + +static const struct hpb_dmae_channel hpb_dmae_channels[] = { + HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */ + HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */ +}; + +static struct hpb_dmae_pdata dma_platform_data __initdata = { + .slaves = hpb_dmae_slaves, + .num_slaves = ARRAY_SIZE(hpb_dmae_slaves), + .channels = hpb_dmae_channels, + .num_channels = ARRAY_SIZE(hpb_dmae_channels), + .ts_shift = { + [XMIT_SZ_8BIT] = 0, + [XMIT_SZ_16BIT] = 1, + [XMIT_SZ_32BIT] = 2, + }, + .num_hw_channels = 39, +}; + +static struct resource hpb_dmae_resources[] __initdata = { + /* Channel registers */ + DEFINE_RES_MEM(0xffc08000, 0x1000), + /* Common registers */ + DEFINE_RES_MEM(0xffc09000, 0x170), + /* Asynchronous reset registers */ + DEFINE_RES_MEM(0xffc00300, 4), + /* Asynchronous mode registers */ + DEFINE_RES_MEM(0xffc00400, 4), + /* IRQ for DMA channels */ + DEFINE_RES_NAMED(gic_iid(0x7b), 5, NULL, IORESOURCE_IRQ), +}; + +static void __init r8a7778_register_hpb_dmae(void) +{ + platform_device_register_resndata(&platform_bus, "hpb-dma-engine", -1, + hpb_dmae_resources, + ARRAY_SIZE(hpb_dmae_resources), + &dma_platform_data, + sizeof(dma_platform_data)); +} + void __init r8a7778_add_standard_devices(void) { r8a7778_add_dt_devices(); @@ -301,12 +401,12 @@ void __init r8a7778_add_standard_devices(void) r8a7778_register_hspi(0); r8a7778_register_hspi(1); r8a7778_register_hspi(2); + + r8a7778_register_hpb_dmae(); } void __init r8a7778_init_late(void) { - phy = usb_get_phy(USB_PHY_TYPE_USB2); - platform_device_register_full(&ehci_info); platform_device_register_full(&ohci_info); } @@ -328,7 +428,7 @@ static struct resource irqpin_resources[] __initdata = { DEFINE_RES_IRQ(gic_iid(0x3e)), /* IRQ3 */ }; -void __init r8a7778_init_irq_extpin(int irlm) +void __init r8a7778_init_irq_extpin_dt(int irlm) { void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE); unsigned long tmp; @@ -346,7 +446,11 @@ void __init r8a7778_init_irq_extpin(int irlm) tmp |= (1 << 21); /* LVLMODE = 1 */ iowrite32(tmp, icr0); iounmap(icr0); +} +void __init r8a7778_init_irq_extpin(int irlm) +{ + r8a7778_init_irq_extpin_dt(irlm); if (irlm) platform_device_register_resndata( &platform_bus, "renesas_intc_irqpin", -1, |