ARM: Merge next-samsung-s3c64xx-platdeletion

Merge branch 'next-samsung-s3c64xx-platdeletion' into next-samsung

Conflicts:

	arch/arm/mach-s3c64xx/Makefile (fixed)

70 files changed, 7982 insertions, 0 deletions

diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
new file mode 100644
index 0000000..44cdd80
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -0,0 +1,165 @@
+# Copyright 2008 Openmoko, Inc.
+#	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
+#
+# Licensed under GPLv2
+
+# temporary until we can eliminate all drivers using it.
+config PLAT_S3C64XX
+	bool
+	depends on ARCH_S3C64XX
+	default y
+	help
+	  Base platform code for any Samsung S3C64XX device
+
+
+# Configuration options for the S3C6410 CPU
+
+config CPU_S3C6400
+	bool
+	help
+	  Enable S3C6400 CPU support
+
+config CPU_S3C6410
+	bool
+	help
+	  Enable S3C6410 CPU support
+
+config S3C64XX_DMA
+	bool "S3C64XX DMA"
+	select S3C_DMA
+
+config S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Internal configuration for default SDHCI setup for S3C6400 and
+	  S3C6410 SoCs.
+
+# platform specific device setup
+
+config S3C64XX_SETUP_I2C0
+	bool
+	default y
+	help
+	  Common setup code for i2c bus 0.
+
+	  Note, currently since i2c0 is always compiled, this setup helper
+	  is always compiled with it.
+
+config S3C64XX_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
+config S3C64XX_SETUP_FB_24BPP
+	bool
+	help
+	  Common setup code for S3C64XX with an 24bpp RGB display helper.
+
+config S3C64XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for S3C64XX SDHCI GPIO configurations
+
+# S36400 Macchine support
+
+config MACH_SMDK6400
+       bool "SMDK6400"
+	select CPU_S3C6400
+	select S3C_DEV_HSMMC
+	select S3C_DEV_NAND
+	select S3C64XX_SETUP_SDHCI
+	help
+	  Machine support for the Samsung SMDK6400
+
+# S3C6410 machine support
+
+config MACH_ANW6410
+	bool "A&W6410"
+	select CPU_S3C6410
+	select S3C_DEV_FB
+	select S3C64XX_SETUP_FB_24BPP
+	help
+	  Machine support for the A&W6410
+
+config MACH_SMDK6410
+	bool "SMDK6410"
+	select CPU_S3C6410
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_I2C1
+	select S3C_DEV_FB
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_USB_HSOTG
+	select S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_I2C1
+	select S3C64XX_SETUP_FB_24BPP
+	help
+	  Machine support for the Samsung SMDK6410
+
+# At least some of the SMDK6410s were shipped with the card detect
+# for the MMC/SD slots connected to the same input. This means that
+# either the boards need to be altered to have channel0 to an alternate
+# configuration or that only one slot can be used.
+
+choice
+	prompt "SMDK6410 MMC/SD slot setup"
+	depends on MACH_SMDK6410
+
+config SMDK6410_SD_CH0
+	bool "Use channel 0 only"
+	depends on MACH_SMDK6410
+	help
+          Select CON7 (channel 0) as the MMC/SD slot, as
+	  at least some SMDK6410 boards come with the
+	  resistors fitted so that the card detects for
+	  channels 0 and 1 are the same.
+
+config SMDK6410_SD_CH1
+	bool "Use channel 1 only"
+	depends on MACH_SMDK6410
+	help
+          Select CON6 (channel 1) as the MMC/SD slot, as
+	  at least some SMDK6410 boards come with the
+	  resistors fitted so that the card detects for
+	  channels 0 and 1 are the same.
+
+endchoice
+
+config SMDK6410_WM1190_EV1
+	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
+	depends on MACH_SMDK6410
+	select REGULATOR
+	select REGULATOR_WM8350
+	select S3C24XX_GPIO_EXTRA64
+	select MFD_WM8350_I2C
+	select MFD_WM8350_CONFIG_MODE_0
+	select MFD_WM8350_CONFIG_MODE_3
+	select MFD_WM8352_CONFIG_MODE_0
+	help
+	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
+	  and audio daughtercard for the Samsung SMDK6410 reference
+	  platform.  Enabling this option will build support for this
+	  module into the kernel.  The presence of the module will be
+	  detected at runtime so the the resulting kernel can be used
+	  with or without the 1190-EV1 fitted.
+
+config MACH_NCP
+	bool "NCP"
+	select CPU_S3C6410
+	select S3C_DEV_I2C1
+	select S3C_DEV_HSMMC1
+	select S3C64XX_SETUP_I2C1
+	help
+          Machine support for the Samsung NCP
+
+config MACH_HMT
+	bool "Airgoo HMT"
+	select CPU_S3C6410
+	select S3C_DEV_FB
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	select S3C64XX_SETUP_FB_24BPP
+	select HAVE_PWM
+	help
+	  Machine support for the Airgoo HMT
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
new file mode 100644
index 0000000..d1d341a
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -0,0 +1,62 @@
+# arch/arm/mach-s3c64xx/Makefile
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core files
+obj-y				+= cpu.o
+obj-y				+= clock.o
+obj-y				+= gpiolib.o
+
+# Core support for S3C6400 system
+
+obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
+obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
+
+obj-y				+= irq.o
+obj-y				+= irq-eint.o
+
+# CPU frequency scaling
+
+obj-$(CONFIG_CPU_FREQ_S3C64XX)  += cpufreq.o
+
+# DMA support
+
+obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
+
+# Device setup
+
+obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+
+# PM
+
+obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= sleep.o
+obj-$(CONFIG_PM)		+= irq-pm.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
+obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o
+obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
+obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
+obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
+
+# device support
+
+obj-y				+= dev-uart.o
+obj-y				+= dev-rtc.o
+obj-$(CONFIG_S3C_ADC)		+= dev-adc.o
+obj-$(CONFIG_SND_S3C24XX_SOC)	+= dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
diff --git a/arch/arm/mach-s3c64xx/Makefile.boot b/arch/arm/mach-s3c64xx/Makefile.boot
new file mode 100644
index 0000000..ba41fdc
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x50008000
+params_phys-y	:= 0x50000100
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
new file mode 100644
index 0000000..7f5e1aa
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -0,0 +1,801 @@
+/* linux/arch/arm/plat-s3c64xx/clock.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX Base clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <mach/regs-sys.h>
+#include <mach/regs-clock.h>
+#include <mach/pll.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * ext_xtal_mux for want of an actual name from the manual.
+*/
+
+static struct clk clk_ext_xtal_mux = {
+	.name		= "ext_xtal",
+	.id		= -1,
+};
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+
+#define clk_fout_mpll	clk_mpll
+#define clk_fout_epll	clk_epll
+
+struct clk clk_h2 = {
+	.name		= "hclk2",
+	.id		= -1,
+	.rate		= 0,
+};
+
+struct clk clk_27m = {
+	.name		= "clk_27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	/* can't rely on clock lock, this register has other usages */
+	local_irq_save(flags);
+
+	val = __raw_readl(S3C64XX_OTHERS);
+	if (enable)
+		val |= S3C64XX_OTHERS_USBMASK;
+	else
+		val &= ~S3C64XX_OTHERS_USBMASK;
+
+	__raw_writel(val, S3C64XX_OTHERS);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+struct clk clk_48m = {
+	.name		= "clk_48m",
+	.id		= -1,
+	.rate		= 48000000,
+	.enable		= clk_48m_ctrl,
+};
+
+static int inline s3c64xx_gate(void __iomem *reg,
+				struct clk *clk,
+				int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	u32 con;
+
+	con = __raw_readl(reg);
+
+	if (enable)
+		con |= ctrlbit;
+	else
+		con &= ~ctrlbit;
+
+	__raw_writel(con, reg);
+	return 0;
+}
+
+static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
+{
+	return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
+}
+
+static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
+{
+	return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
+}
+
+int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
+{
+	return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
+}
+
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_h,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_TSADC,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_IIC,
+	}, {
+		.name		= "iis",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_IIS0,
+	}, {
+		.name		= "iis",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_IIS1,
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_SPI0,
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_SPI1,
+	}, {
+		.name		= "spi_48m",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_SPI0_48,
+	}, {
+		.name		= "spi_48m",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_SPI1_48,
+	}, {
+		.name		= "48m",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_MMC0_48,
+	}, {
+		.name		= "48m",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_MMC1_48,
+	}, {
+		.name		= "48m",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
+	}, {
+		.name		= "dma0",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_DMA0,
+	}, {
+		.name		= "dma1",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_DMA1,
+	},
+};
+
+static struct clk init_clocks[] = {
+	{
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_LCD,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_GPIO,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_UHOST,
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC0,
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC1,
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC2,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_PWM,
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART3,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_RTC,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= S3C_CLKCON_PCLK_WDT,
+	}, {
+		.name		= "ac97",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= S3C_CLKCON_PCLK_AC97,
+	}
+};
+
+
+static struct clk clk_fout_apll = {
+	.name		= "fout_apll",
+	.id		= -1,
+};
+
+static struct clk *clk_src_apll_list[] = {
+	[0] = &clk_fin_apll,
+	[1] = &clk_fout_apll,
+};
+
+static struct clksrc_sources clk_src_apll = {
+	.sources	= clk_src_apll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
+};
+
+static struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 0, .size = 1  },
+	.sources	= &clk_src_apll,
+};
+
+static struct clk *clk_src_epll_list[] = {
+	[0] = &clk_fin_epll,
+	[1] = &clk_fout_epll,
+};
+
+static struct clksrc_sources clk_src_epll = {
+	.sources	= clk_src_epll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 2, .size = 1  },
+	.sources	= &clk_src_epll,
+};
+
+static struct clk *clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_fout_mpll,
+};
+
+static struct clksrc_sources clk_src_mpll = {
+	.sources	= clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 1, .size = 1  },
+	.sources	= &clk_src_mpll,
+};
+
+static unsigned int armclk_mask;
+
+static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv;
+
+	/* divisor mask starts at bit0, so no need to shift */
+	clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
+
+	return rate / (clkdiv + 1);
+}
+
+static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
+						unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+
+	if (parent < rate)
+		return parent;
+
+	div = (parent / rate) - 1;
+	if (div > armclk_mask)
+		div = armclk_mask;
+
+	return parent / (div + 1);
+}
+
+static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+	u32 val;
+
+	if (rate < parent / (armclk_mask + 1))
+		return -EINVAL;
+
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
+
+	val = __raw_readl(S3C_CLK_DIV0);
+	val &= ~armclk_mask;
+	val |= (div - 1);
+	__raw_writel(val, S3C_CLK_DIV0);
+
+	return 0;
+
+}
+
+static struct clk clk_arm = {
+	.name		= "armclk",
+	.id		= -1,
+	.parent		= &clk_mout_apll.clk,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c64xx_clk_arm_get_rate,
+		.set_rate	= s3c64xx_clk_arm_set_rate,
+		.round_rate	= s3c64xx_clk_arm_round_rate,
+	},
+};
+
+static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK)
+		rate /= 2;
+
+	return rate;
+}
+
+static struct clk_ops clk_dout_ops = {
+	.get_rate	= s3c64xx_clk_doutmpll_get_rate,
+};
+
+static struct clk clk_dout_mpll = {
+	.name		= "dout_mpll",
+	.id		= -1,
+	.parent		= &clk_mout_mpll.clk,
+	.ops		= &clk_dout_ops,
+};
+
+static struct clk *clkset_spi_mmc_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_27m,
+};
+
+static struct clksrc_sources clkset_spi_mmc = {
+	.sources	= clkset_spi_mmc_list,
+	.nr_sources	= ARRAY_SIZE(clkset_spi_mmc_list),
+};
+
+static struct clk *clkset_irda_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	NULL,
+	&clk_27m,
+};
+
+static struct clksrc_sources clkset_irda = {
+	.sources	= clkset_irda_list,
+	.nr_sources	= ARRAY_SIZE(clkset_irda_list),
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	NULL,
+	NULL
+};
+
+static struct clksrc_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clk *clkset_uhost_list[] = {
+	&clk_48m,
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+};
+
+static struct clksrc_sources clkset_uhost = {
+	.sources	= clkset_uhost_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uhost_list),
+};
+
+/* The peripheral clocks are all controlled via clocksource followed
+ * by an optional divider and gate stage. We currently roll this into
+ * one clock which hides the intermediate clock from the mux.
+ *
+ * Note, the JPEG clock can only be an even divider...
+ *
+ * The scaler and LCD clocks depend on the S3C64XX version, and also
+ * have a common parent divisor so are not included here.
+ */
+
+/* clocks that feed other parts of the clock source tree */
+
+static struct clk clk_iis_cd0 = {
+	.name		= "iis_cdclk0",
+	.id		= -1,
+};
+
+static struct clk clk_iis_cd1 = {
+	.name		= "iis_cdclk1",
+	.id		= -1,
+};
+
+static struct clk clk_pcm_cd = {
+	.name		= "pcm_cdclk",
+	.id		= -1,
+};
+
+static struct clk *clkset_audio0_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_dout_mpll,
+	[2] = &clk_fin_epll,
+	[3] = &clk_iis_cd0,
+	[4] = &clk_pcm_cd,
+};
+
+static struct clksrc_sources clkset_audio0 = {
+	.sources	= clkset_audio0_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
+};
+
+static struct clk *clkset_audio1_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_dout_mpll,
+	[2] = &clk_fin_epll,
+	[3] = &clk_iis_cd1,
+	[4] = &clk_pcm_cd,
+};
+
+static struct clksrc_sources clkset_audio1 = {
+	.sources	= clkset_audio1_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
+};
+
+static struct clk *clkset_camif_list[] = {
+	&clk_h2,
+};
+
+static struct clksrc_sources clkset_camif = {
+	.sources	= clkset_camif_list,
+	.nr_sources	= ARRAY_SIZE(clkset_camif_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 0,
+			.ctrlbit        = S3C_CLKCON_SCLK_MMC0,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 18, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4  },
+		.sources	= &clkset_spi_mmc,
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 1,
+			.ctrlbit        = S3C_CLKCON_SCLK_MMC1,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 20, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4  },
+		.sources	= &clkset_spi_mmc,
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 2,
+			.ctrlbit        = S3C_CLKCON_SCLK_MMC2,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 22, .size = 2  },
+		.reg_div 	= { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4  },
+		.sources	= &clkset_spi_mmc,
+	}, {
+		.clk	= {
+			.name		= "usb-bus-host",
+			.id		= -1,
+			.ctrlbit        = S3C_CLKCON_SCLK_UHOST,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src 	= { .reg = S3C_CLK_SRC, .shift = 5, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 20, .size = 4  },
+		.sources	= &clkset_uhost,
+	}, {
+		.clk	= {
+			.name		= "uclk1",
+			.id		= -1,
+			.ctrlbit        = S3C_CLKCON_SCLK_UART,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 13, .size = 1  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4  },
+		.sources	= &clkset_uart,
+	}, {
+/* Where does UCLK0 come from? */
+		.clk	= {
+			.name		= "spi-bus",
+			.id		= 0,
+			.ctrlbit        = S3C_CLKCON_SCLK_SPI0,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 14, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4  },
+		.sources	= &clkset_spi_mmc,
+	}, {
+		.clk	= {
+			.name		= "spi-bus",
+			.id		= 1,
+			.ctrlbit        = S3C_CLKCON_SCLK_SPI1,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 16, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4  },
+		.sources	= &clkset_spi_mmc,
+	}, {
+		.clk	= {
+			.name		= "audio-bus",
+			.id		= 0,
+			.ctrlbit        = S3C_CLKCON_SCLK_AUDIO0,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 7, .size = 3  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4  },
+		.sources	= &clkset_audio0,
+	}, {
+		.clk	= {
+			.name		= "audio-bus",
+			.id		= 1,
+			.ctrlbit        = S3C_CLKCON_SCLK_AUDIO1,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 10, .size = 3  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4  },
+		.sources	= &clkset_audio1,
+	}, {
+		.clk	= {
+			.name		= "irda-bus",
+			.id		= 0,
+			.ctrlbit        = S3C_CLKCON_SCLK_IRDA,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 24, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 20, .size = 4  },
+		.sources	= &clkset_irda,
+	}, {
+		.clk	= {
+			.name		= "camera",
+			.id		= -1,
+			.ctrlbit        = S3C_CLKCON_SCLK_CAM,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_div	= { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4  },
+		.reg_src	= { .reg = NULL, .shift = 0, .size = 0  },
+		.sources	= &clkset_camif,
+	},
+};
+
+/* Clock initialisation code */
+
+static struct clksrc_clk *init_parents[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+};
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+void __init_or_cpufreq s3c6400_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long hclk2;
+	unsigned long pclk;
+	unsigned long epll;
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned int ptr;
+	u32 clkdiv0;
+
+	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+	clkdiv0 = __raw_readl(S3C_CLK_DIV0);
+	printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0);
+
+	xtal_clk = clk_get(NULL, "xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+	/* For now assume the mux always selects the crystal */
+	clk_ext_xtal_mux.parent = xtal_clk;
+
+	epll = s3c6400_get_epll(xtal);
+	mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
+	apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
+
+	fclk = mpll;
+
+	printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
+	       apll, mpll, epll);
+
+	hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+	hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
+	pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
+
+	printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n",
+	       hclk2, hclk, pclk);
+
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_fout_apll.rate = apll;
+
+	clk_h2.rate = hclk2;
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+	clk_f.rate = fclk;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+		s3c_set_clksrc(init_parents[ptr], true);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks1[] __initdata = {
+	&clk_ext_xtal_mux,
+	&clk_iis_cd0,
+	&clk_iis_cd1,
+	&clk_pcm_cd,
+	&clk_mout_epll.clk,
+	&clk_mout_mpll.clk,
+	&clk_dout_mpll,
+	&clk_arm,
+};
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_epll,
+	&clk_27m,
+	&clk_48m,
+	&clk_h2,
+};
+
+/**
+ * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410
+ * @xtal: The rate for the clock crystal feeding the PLLs.
+ * @armclk_divlimit: Divisor mask for ARMCLK.
+ *
+ * Register the clocks for the S3C6400 and S3C6410 SoC range, such
+ * as ARMCLK as well as the necessary parent clocks.
+ *
+ * This call does not setup the clocks, which is left to the
+ * s3c6400_setup_clocks() call which may be needed by the cpufreq
+ * or resume code to re-set the clocks if the bootloader has changed
+ * them.
+ */
+void __init s3c64xx_register_clocks(unsigned long xtal, 
+				    unsigned armclk_divlimit)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	armclk_mask = armclk_divlimit;
+
+	s3c24xx_register_baseclocks(xtal);
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1));
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
new file mode 100644
index 0000000..374e45e
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -0,0 +1,167 @@
+/* linux/arch/arm/plat-s3c64xx/cpu.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+#include <mach/s3c6400.h>
+#include <mach/s3c6410.h>
+
+/* table of supported CPUs */
+
+static const char name_s3c6400[] = "S3C6400";
+static const char name_s3c6410[] = "S3C6410";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= 0x36400000,
+		.idmask		= 0xfffff000,
+		.map_io		= s3c6400_map_io,
+		.init_clocks	= s3c6400_init_clocks,
+		.init_uarts	= s3c6400_init_uarts,
+		.init		= s3c6400_init,
+		.name		= name_s3c6400,
+	}, {
+		.idcode		= 0x36410100,
+		.idmask		= 0xffffff00,
+		.map_io		= s3c6410_map_io,
+		.init_clocks	= s3c6410_init_clocks,
+		.init_uarts	= s3c6410_init_uarts,
+		.init		= s3c6410_init,
+		.name		= name_s3c6410,
+	},
+};
+
+/* minimal IO mapping */
+
+/* see notes on uart map in arch/arm/mach-s3c6400/include/mach/debug-macro.S */
+#define UART_OFFS (S3C_PA_UART & 0xfffff)
+
+static struct map_desc s3c_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_SYSCON),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_MEM,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_SROM),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)(S3C_VA_UART + UART_OFFS),
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_TIMER,
+		.pfn		= __phys_to_pfn(S3C_PA_TIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C64XX_VA_GPIO,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C64XX_VA_MODEM,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_MODEM),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_WATCHDOG),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
+		.length		= SZ_1K,
+		.type		= MT_DEVICE,
+	},
+};
+
+
+struct sysdev_class s3c64xx_sysclass = {
+	.name	= "s3c64xx-core",
+};
+
+static struct sys_device s3c64xx_sysdev = {
+	.cls	= &s3c64xx_sysclass,
+};
+
+/* uart registration process */
+
+void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
+}
+
+/* read cpu identification code */
+
+void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
+{
+	unsigned long idcode;
+
+	/* initialise the io descriptors we need for initialisation */
+	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
+	iotable_init(mach_desc, size);
+
+	idcode = __raw_readl(S3C_VA_SYS + 0x118);
+	if (!idcode) {
+		/* S3C6400 has the ID register in a different place,
+		 * and needs a write before it can be read. */
+
+		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
+		idcode = __raw_readl(S3C_VA_SYS + 0xA1C);
+	}
+
+	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+static __init int s3c64xx_sysdev_init(void)
+{
+	sysdev_class_register(&s3c64xx_sysclass);
+	return sysdev_register(&s3c64xx_sysdev);
+}
+
+core_initcall(s3c64xx_sysdev_init);
diff --git a/arch/arm/mach-s3c64xx/cpufreq.c b/arch/arm/mach-s3c64xx/cpufreq.c
new file mode 100644
index 0000000..74c0e83
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/cpufreq.c
@@ -0,0 +1,270 @@
+/* linux/arch/arm/plat-s3c64xx/cpufreq.c
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * S3C64xx CPUfreq Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
+
+static struct clk *armclk;
+static struct regulator *vddarm;
+static unsigned long regulator_latency;
+
+#ifdef CONFIG_CPU_S3C6410
+struct s3c64xx_dvfs {
+	unsigned int vddarm_min;
+	unsigned int vddarm_max;
+};
+
+static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
+	[0] = { 1000000, 1150000 },
+	[1] = { 1050000, 1150000 },
+	[2] = { 1100000, 1150000 },
+	[3] = { 1200000, 1350000 },
+};
+
+static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
+	{ 0,  66000 },
+	{ 0, 133000 },
+	{ 1, 222000 },
+	{ 1, 266000 },
+	{ 2, 333000 },
+	{ 2, 400000 },
+	{ 2, 532000 },
+	{ 2, 533000 },
+	{ 3, 667000 },
+	{ 0, CPUFREQ_TABLE_END },
+};
+#endif
+
+static int s3c64xx_cpufreq_verify_speed(struct cpufreq_policy *policy)
+{
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	return cpufreq_frequency_table_verify(policy, s3c64xx_freq_table);
+}
+
+static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu)
+{
+	if (cpu != 0)
+		return 0;
+
+	return clk_get_rate(armclk) / 1000;
+}
+
+static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
+				      unsigned int target_freq,
+				      unsigned int relation)
+{
+	int ret;
+	unsigned int i;
+	struct cpufreq_freqs freqs;
+	struct s3c64xx_dvfs *dvfs;
+
+	ret = cpufreq_frequency_table_target(policy, s3c64xx_freq_table,
+					     target_freq, relation, &i);
+	if (ret != 0)
+		return ret;
+
+	freqs.cpu = 0;
+	freqs.old = clk_get_rate(armclk) / 1000;
+	freqs.new = s3c64xx_freq_table[i].frequency;
+	freqs.flags = 0;
+	dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index];
+
+	if (freqs.old == freqs.new)
+		return 0;
+
+	pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new);
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+#ifdef CONFIG_REGULATOR
+	if (vddarm && freqs.new > freqs.old) {
+		ret = regulator_set_voltage(vddarm,
+					    dvfs->vddarm_min,
+					    dvfs->vddarm_max);
+		if (ret != 0) {
+			pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
+			       freqs.new, ret);
+			goto err;
+		}
+	}
+#endif
+
+	ret = clk_set_rate(armclk, freqs.new * 1000);
+	if (ret < 0) {
+		pr_err("cpufreq: Failed to set rate %dkHz: %d\n",
+		       freqs.new, ret);
+		goto err;
+	}
+
+#ifdef CONFIG_REGULATOR
+	if (vddarm && freqs.new < freqs.old) {
+		ret = regulator_set_voltage(vddarm,
+					    dvfs->vddarm_min,
+					    dvfs->vddarm_max);
+		if (ret != 0) {
+			pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
+			       freqs.new, ret);
+			goto err_clk;
+		}
+	}
+#endif
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	pr_debug("cpufreq: Set actual frequency %lukHz\n",
+		 clk_get_rate(armclk) / 1000);
+
+	return 0;
+
+err_clk:
+	if (clk_set_rate(armclk, freqs.old * 1000) < 0)
+		pr_err("Failed to restore original clock rate\n");
+err:
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return ret;
+}
+
+#ifdef CONFIG_REGULATOR
+static void __init s3c64xx_cpufreq_config_regulator(void)
+{
+	int count, v, i, found;
+	struct cpufreq_frequency_table *freq;
+	struct s3c64xx_dvfs *dvfs;
+
+	count = regulator_count_voltages(vddarm);
+	if (count < 0) {
+		pr_err("cpufreq: Unable to check supported voltages\n");
+	}
+
+	freq = s3c64xx_freq_table;
+	while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
+		if (freq->frequency == CPUFREQ_ENTRY_INVALID)
+			continue;
+
+		dvfs = &s3c64xx_dvfs_table[freq->index];
+		found = 0;
+
+		for (i = 0; i < count; i++) {
+			v = regulator_list_voltage(vddarm, i);
+			if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max)
+				found = 1;
+		}
+
+		if (!found) {
+			pr_debug("cpufreq: %dkHz unsupported by regulator\n",
+				 freq->frequency);
+			freq->frequency = CPUFREQ_ENTRY_INVALID;
+		}
+
+		freq++;
+	}
+
+	/* Guess based on having to do an I2C/SPI write; in future we
+	 * will be able to query the regulator performance here. */
+	regulator_latency = 1 * 1000 * 1000;
+}
+#endif
+
+static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
+{
+	int ret;
+	struct cpufreq_frequency_table *freq;
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	if (s3c64xx_freq_table == NULL) {
+		pr_err("cpufreq: No frequency information for this CPU\n");
+		return -ENODEV;
+	}
+
+	armclk = clk_get(NULL, "armclk");
+	if (IS_ERR(armclk)) {
+		pr_err("cpufreq: Unable to obtain ARMCLK: %ld\n",
+		       PTR_ERR(armclk));
+		return PTR_ERR(armclk);
+	}
+
+#ifdef CONFIG_REGULATOR
+	vddarm = regulator_get(NULL, "vddarm");
+	if (IS_ERR(vddarm)) {
+		ret = PTR_ERR(vddarm);
+		pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret);
+		pr_err("cpufreq: Only frequency scaling available\n");
+		vddarm = NULL;
+	} else {
+		s3c64xx_cpufreq_config_regulator();
+	}
+#endif
+
+	freq = s3c64xx_freq_table;
+	while (freq->frequency != CPUFREQ_TABLE_END) {
+		unsigned long r;
+
+		/* Check for frequencies we can generate */
+		r = clk_round_rate(armclk, freq->frequency * 1000);
+		r /= 1000;
+		if (r != freq->frequency) {
+			pr_debug("cpufreq: %dkHz unsupported by clock\n",
+				 freq->frequency);
+			freq->frequency = CPUFREQ_ENTRY_INVALID;
+		}
+
+		/* If we have no regulator then assume startup
+		 * frequency is the maximum we can support. */
+		if (!vddarm && freq->frequency > s3c64xx_cpufreq_get_speed(0))
+			freq->frequency = CPUFREQ_ENTRY_INVALID;
+
+		freq++;
+	}
+
+	policy->cur = clk_get_rate(armclk) / 1000;
+
+	/* Datasheet says PLL stabalisation time (if we were to use
+	 * the PLLs, which we don't currently) is ~300us worst case,
+	 * but add some fudge.
+	 */
+	policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency;
+
+	ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table);
+	if (ret != 0) {
+		pr_err("cpufreq: Failed to configure frequency table: %d\n",
+		       ret);
+		regulator_put(vddarm);
+		clk_put(armclk);
+	}
+
+	return ret;
+}
+
+static struct cpufreq_driver s3c64xx_cpufreq_driver = {
+	.owner		= THIS_MODULE,
+	.flags          = 0,
+	.verify		= s3c64xx_cpufreq_verify_speed,
+	.target		= s3c64xx_cpufreq_set_target,
+	.get		= s3c64xx_cpufreq_get_speed,
+	.init		= s3c64xx_cpufreq_driver_init,
+	.name		= "s3c",
+};
+
+static int __init s3c64xx_cpufreq_init(void)
+{
+	return cpufreq_register_driver(&s3c64xx_cpufreq_driver);
+}
+module_init(s3c64xx_cpufreq_init);
diff --git a/arch/arm/mach-s3c64xx/dev-adc.c b/arch/arm/mach-s3c64xx/dev-adc.c
new file mode 100644
index 0000000..fafef9b
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-adc.c
@@ -0,0 +1,46 @@
+/* linux/arch/arm/plat-s3c64xx/dev-adc.c
+ *
+ * Copyright 2010 Maurus Cuelenaere
+ *
+ * S3C64xx series device definition for ADC device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/adc.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_adc_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_ADC,
+		.end   = S3C64XX_PA_ADC + SZ_256 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TC,
+		.end   = IRQ_TC,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_ADC,
+		.end   = IRQ_ADC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_adc = {
+	.name		= "s3c64xx-adc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
+	.resource	= s3c_adc_resource,
+};
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
new file mode 100644
index 0000000..aaffb80
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -0,0 +1,257 @@
+/* linux/arch/arm/plat-s3c/dev-audio.c
+ *
+ * Copyright 2009 Wolfson Microelectronics
+ *      Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/gpio.h>
+
+#include <plat/devs.h>
+#include <plat/audio.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/gpio-bank-c.h>
+#include <mach/gpio-bank-d.h>
+#include <mach/gpio-bank-e.h>
+#include <mach/gpio-bank-h.h>
+
+static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_I2S0_CLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_I2S0_CDCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_I2S0_LRCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_I2S0_DI);
+		s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_I2S0_D0);
+		break;
+	case 1:
+		s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_I2S1_CLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_I2S1_CDCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_I2S1_LRCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_I2S1_DI);
+		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_I2S1_D0);
+	default:
+		printk(KERN_DEBUG "Invalid I2S Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int s3c64xx_i2sv4_cfg_gpio(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_I2S_V40_DO0);
+	s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_I2S_V40_DO1);
+	s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C64XX_GPC7_I2S_V40_DO2);
+	s3c_gpio_cfgpin(S3C64XX_GPH(6), S3C64XX_GPH6_I2S_V40_BCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPH(7), S3C64XX_GPH7_I2S_V40_CDCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPH(8), S3C64XX_GPH8_I2S_V40_LRCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPH(9), S3C64XX_GPH9_I2S_V40_DI);
+
+	return 0;
+}
+
+static struct resource s3c64xx_iis0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IIS0,
+		.end   = S3C64XX_PA_IIS0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S0_OUT,
+		.end   = DMACH_I2S0_OUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S0_IN,
+		.end   = DMACH_I2S0_IN,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_i2s0_pdata = {
+	.cfg_gpio = s3c64xx_i2sv3_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iis0 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
+	.resource	  = s3c64xx_iis0_resource,
+	.dev = {
+		.platform_data = &s3c_i2s0_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_iis0);
+
+static struct resource s3c64xx_iis1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IIS1,
+		.end   = S3C64XX_PA_IIS1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S1_OUT,
+		.end   = DMACH_I2S1_OUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S1_IN,
+		.end   = DMACH_I2S1_IN,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_i2s1_pdata = {
+	.cfg_gpio = s3c64xx_i2sv3_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iis1 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
+	.resource	  = s3c64xx_iis1_resource,
+	.dev = {
+		.platform_data = &s3c_i2s1_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_iis1);
+
+static struct resource s3c64xx_iisv4_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IISV4,
+		.end   = S3C64XX_PA_IISV4 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_HSI_I2SV40_TX,
+		.end   = DMACH_HSI_I2SV40_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_HSI_I2SV40_RX,
+		.end   = DMACH_HSI_I2SV40_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_i2sv4_pdata = {
+	.cfg_gpio = s3c64xx_i2sv4_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iisv4 = {
+	.name		  = "s3c64xx-iis-v4",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
+	.resource	  = s3c64xx_iisv4_resource,
+	.dev = {
+		.platform_data = &s3c_i2sv4_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_iisv4);
+
+
+/* PCM Controller platform_devices */
+
+static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_PCM0_SCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_PCM0_EXTCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_PCM0_FSYNC);
+		s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_PCM0_SIN);
+		s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_PCM0_SOUT);
+		break;
+	case 1:
+		s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_PCM1_SCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_PCM1_EXTCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_PCM1_FSYNC);
+		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_PCM1_SIN);
+		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_PCM1_SOUT);
+		break;
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s3c64xx_pcm0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_PCM0,
+		.end   = S3C64XX_PA_PCM0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM0_TX,
+		.end   = DMACH_PCM0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM0_RX,
+		.end   = DMACH_PCM0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_pcm0_pdata = {
+	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm0 = {
+	.name		  = "samsung-pcm",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm0_resource),
+	.resource	  = s3c64xx_pcm0_resource,
+	.dev = {
+		.platform_data = &s3c_pcm0_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm0);
+
+static struct resource s3c64xx_pcm1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_PCM1,
+		.end   = S3C64XX_PA_PCM1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM1_TX,
+		.end   = DMACH_PCM1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM1_RX,
+		.end   = DMACH_PCM1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_pcm1_pdata = {
+	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm1 = {
+	.name		  = "samsung-pcm",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm1_resource),
+	.resource	  = s3c64xx_pcm1_resource,
+	.dev = {
+		.platform_data = &s3c_pcm1_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm1);
diff --git a/arch/arm/mach-s3c64xx/dev-rtc.c b/arch/arm/mach-s3c64xx/dev-rtc.c
new file mode 100644
index 0000000..b9e7a05
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-rtc.c
@@ -0,0 +1,43 @@
+/* linux/arch/arm/plat-s3c64xx/dev-rtc.c
+ *
+ * Copyright 2009 by Maurus Cuelenaere <mcuelenaere@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+static struct resource s3c_rtc_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_RTC,
+		.end   = S3C64XX_PA_RTC + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_RTC_ALARM,
+		.end   = IRQ_RTC_ALARM,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_RTC_TIC,
+		.end   = IRQ_RTC_TIC,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+struct platform_device s3c_device_rtc = {
+	.name		  = "s3c64xx-rtc",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_rtc_resource),
+	.resource	  = s3c_rtc_resource,
+};
+EXPORT_SYMBOL(s3c_device_rtc);
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
new file mode 100644
index 0000000..29c32d0
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -0,0 +1,182 @@
+/* linux/arch/arm/plat-s3c64xx/dev-spi.c
+ *
+ * Copyright (C) 2009 Samsung Electronics Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/gpio.h>
+#include <mach/gpio-bank-c.h>
+#include <mach/spi-clocks.h>
+
+#include <plat/s3c64xx-spi.h>
+#include <plat/gpio-cfg.h>
+#include <plat/irqs.h>
+
+static char *spi_src_clks[] = {
+	[S3C64XX_SPI_SRCCLK_PCLK] = "pclk",
+	[S3C64XX_SPI_SRCCLK_SPIBUS] = "spi-bus",
+	[S3C64XX_SPI_SRCCLK_48M] = "spi_48m",
+};
+
+/* SPI Controller platform_devices */
+
+/* Since we emulate multi-cs capability, we do not touch the GPC-3,7.
+ * The emulated CS is toggled by board specific mechanism, as it can
+ * be either some immediate GPIO or some signal out of some other
+ * chip in between ... or some yet another way.
+ * We simply do not assume anything about CS.
+ */
+static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S3C64XX_GPC(0), S3C64XX_GPC0_SPI_MISO0);
+		s3c_gpio_cfgpin(S3C64XX_GPC(1), S3C64XX_GPC1_SPI_CLKO);
+		s3c_gpio_cfgpin(S3C64XX_GPC(2), S3C64XX_GPC2_SPI_MOSIO);
+		s3c_gpio_setpull(S3C64XX_GPC(0), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S3C64XX_GPC(1), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S3C64XX_GPC(2), S3C_GPIO_PULL_UP);
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_SPI_MISO1);
+		s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_SPI_CLK1);
+		s3c_gpio_cfgpin(S3C64XX_GPC(6), S3C64XX_GPC6_SPI_MOSI1);
+		s3c_gpio_setpull(S3C64XX_GPC(4), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S3C64XX_GPC(5), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S3C64XX_GPC(6), S3C_GPIO_PULL_UP);
+		break;
+
+	default:
+		dev_err(&pdev->dev, "Invalid SPI Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s3c64xx_spi0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_SPI0,
+		.end   = S3C64XX_PA_SPI0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI0_TX,
+		.end   = DMACH_SPI0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI0_RX,
+		.end   = DMACH_SPI0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
+	.cfg_gpio = s3c64xx_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x7f,
+	.rx_lvl_offset = 13,
+};
+
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s3c64xx_device_spi0 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_spi0_resource),
+	.resource	  = s3c64xx_spi0_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s3c64xx_spi0_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_spi0);
+
+static struct resource s3c64xx_spi1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_SPI1,
+		.end   = S3C64XX_PA_SPI1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI1_TX,
+		.end   = DMACH_SPI1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI1_RX,
+		.end   = DMACH_SPI1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
+	.cfg_gpio = s3c64xx_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x7f,
+	.rx_lvl_offset = 13,
+};
+
+struct platform_device s3c64xx_device_spi1 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_spi1_resource),
+	.resource	  = s3c64xx_spi1_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s3c64xx_spi1_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_spi1);
+
+void __init s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
+{
+	struct s3c64xx_spi_info *pd;
+
+	/* Reject invalid configuration */
+	if (!num_cs || src_clk_nr < 0
+			|| src_clk_nr > S3C64XX_SPI_SRCCLK_48M) {
+		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
+		return;
+	}
+
+	switch (cntrlr) {
+	case 0:
+		pd = &s3c64xx_spi0_pdata;
+		break;
+	case 1:
+		pd = &s3c64xx_spi1_pdata;
+		break;
+	default:
+		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
+							__func__, cntrlr);
+		return;
+	}
+
+	pd->num_cs = num_cs;
+	pd->src_clk_nr = src_clk_nr;
+	pd->src_clk_name = spi_src_clks[src_clk_nr];
+}
diff --git a/arch/arm/mach-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c
new file mode 100644
index 0000000..f797f74
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-uart.c
@@ -0,0 +1,147 @@
+/* linux/arch/arm/plat-s3c64xx/dev-uart.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX UART resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+/* Serial port registrations */
+
+/* 64xx uarts are closer together */
+
+static struct resource s3c64xx_uart0_resource[] = {
+	[0] = {
+		.start	= S3C_PA_UART0,
+		.end	= S3C_PA_UART0 + 0x100,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX0,
+		.end	= IRQ_S3CUART_RX0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX0,
+		.end	= IRQ_S3CUART_TX0,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR0,
+		.end	= IRQ_S3CUART_ERR0,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct resource s3c64xx_uart1_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART1,
+		.end   = S3C_PA_UART1 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX1,
+		.end	= IRQ_S3CUART_RX1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX1,
+		.end	= IRQ_S3CUART_TX1,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR1,
+		.end	= IRQ_S3CUART_ERR1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s3c6xx_uart2_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART2,
+		.end   = S3C_PA_UART2 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX2,
+		.end	= IRQ_S3CUART_RX2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX2,
+		.end	= IRQ_S3CUART_TX2,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR2,
+		.end	= IRQ_S3CUART_ERR2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s3c64xx_uart3_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART3,
+		.end   = S3C_PA_UART3 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX3,
+		.end	= IRQ_S3CUART_RX3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX3,
+		.end	= IRQ_S3CUART_TX3,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR3,
+		.end	= IRQ_S3CUART_ERR3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+
+struct s3c24xx_uart_resources s3c64xx_uart_resources[] __initdata = {
+	[0] = {
+		.resources	= s3c64xx_uart0_resource,
+		.nr_resources	= ARRAY_SIZE(s3c64xx_uart0_resource),
+	},
+	[1] = {
+		.resources	= s3c64xx_uart1_resource,
+		.nr_resources	= ARRAY_SIZE(s3c64xx_uart1_resource),
+	},
+	[2] = {
+		.resources	= s3c6xx_uart2_resource,
+		.nr_resources	= ARRAY_SIZE(s3c6xx_uart2_resource),
+	},
+	[3] = {
+		.resources	= s3c64xx_uart3_resource,
+		.nr_resources	= ARRAY_SIZE(s3c64xx_uart3_resource),
+	},
+};
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
new file mode 100644
index 0000000..b62bdf1
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -0,0 +1,749 @@
+/* linux/arch/arm/plat-s3c64xx/dma.c
+ *
+ * Copyright 2009 Openmoko, Inc.
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/dmapool.h>
+#include <linux/sysdev.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <mach/regs-sys.h>
+
+#include <asm/hardware/pl080.h>
+
+/* dma channel state information */
+
+struct s3c64xx_dmac {
+	struct sys_device	 sysdev;
+	struct clk		*clk;
+	void __iomem		*regs;
+	struct s3c2410_dma_chan *channels;
+	enum dma_ch		 chanbase;
+};
+
+/* pool to provide LLI buffers */
+static struct dma_pool *dma_pool;
+
+/* Debug configuration and code */
+
+static unsigned char debug_show_buffs = 0;
+
+static void dbg_showchan(struct s3c2410_dma_chan *chan)
+{
+	pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n",
+		 chan->number,
+		 readl(chan->regs + PL080_CH_SRC_ADDR),
+		 readl(chan->regs + PL080_CH_DST_ADDR),
+		 readl(chan->regs + PL080_CH_LLI),
+		 readl(chan->regs + PL080_CH_CONTROL),
+		 readl(chan->regs + PL080S_CH_CONTROL2),
+		 readl(chan->regs + PL080S_CH_CONFIG));
+}
+
+static void show_lli(struct pl080s_lli *lli)
+{
+	pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n",
+		 lli, lli->src_addr, lli->dst_addr, lli->next_lli,
+		 lli->control0, lli->control1);
+}
+
+static void dbg_showbuffs(struct s3c2410_dma_chan *chan)
+{
+	struct s3c64xx_dma_buff *ptr;
+	struct s3c64xx_dma_buff *end;
+
+	pr_debug("DMA%d: buffs next %p, curr %p, end %p\n",
+		 chan->number, chan->next, chan->curr, chan->end);
+
+	ptr = chan->next;
+	end = chan->end;
+
+	if (debug_show_buffs) {
+		for (; ptr != NULL; ptr = ptr->next) {
+			pr_debug("DMA%d: %08x ",
+				 chan->number, ptr->lli_dma);
+			show_lli(ptr->lli);
+		}
+	}
+}
+
+/* End of Debug */
+
+static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel)
+{
+	struct s3c2410_dma_chan *chan;
+	unsigned int start, offs;
+
+	start = 0;
+
+	if (channel >= DMACH_PCM1_TX)
+		start = 8;
+
+	for (offs = 0; offs < 8; offs++) {
+		chan = &s3c2410_chans[start + offs];
+		if (!chan->in_use)
+			goto found;
+	}
+
+	return NULL;
+
+found:
+	s3c_dma_chan_map[channel] = chan;
+	return chan;
+}
+
+int s3c2410_dma_config(unsigned int channel, int xferunit)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	switch (xferunit) {
+	case 1:
+		chan->hw_width = 0;
+		break;
+	case 2:
+		chan->hw_width = 1;
+		break;
+	case 4:
+		chan->hw_width = 2;
+		break;
+	default:
+		printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_config);
+
+static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
+				 struct pl080s_lli *lli,
+				 dma_addr_t data, int size)
+{
+	dma_addr_t src, dst;
+	u32 control0, control1;
+
+	switch (chan->source) {
+	case S3C2410_DMASRC_HW:
+		src = chan->dev_addr;
+		dst = data;
+		control0 = PL080_CONTROL_SRC_AHB2;
+		control0 |= PL080_CONTROL_DST_INCR;
+		break;
+
+	case S3C2410_DMASRC_MEM:
+		src = data;
+		dst = chan->dev_addr;
+		control0 = PL080_CONTROL_DST_AHB2;
+		control0 |= PL080_CONTROL_SRC_INCR;
+		break;
+	default:
+		BUG();
+	}
+
+	/* note, we do not currently setup any of the burst controls */
+
+	control1 = size >> chan->hw_width;	/* size in no of xfers */
+	control0 |= PL080_CONTROL_PROT_SYS;	/* always in priv. mode */
+	control0 |= PL080_CONTROL_TC_IRQ_EN;	/* always fire IRQ */
+	control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
+	control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
+
+	lli->src_addr = src;
+	lli->dst_addr = dst;
+	lli->next_lli = 0;
+	lli->control0 = control0;
+	lli->control1 = control1;
+}
+
+static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan,
+				struct pl080s_lli *lli)
+{
+	void __iomem *regs = chan->regs;
+
+	pr_debug("%s: LLI %p => regs\n", __func__, lli);
+	show_lli(lli);
+
+	writel(lli->src_addr, regs + PL080_CH_SRC_ADDR);
+	writel(lli->dst_addr, regs + PL080_CH_DST_ADDR);
+	writel(lli->next_lli, regs + PL080_CH_LLI);
+	writel(lli->control0, regs + PL080_CH_CONTROL);
+	writel(lli->control1, regs + PL080S_CH_CONTROL2);
+}
+
+static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan)
+{
+	struct s3c64xx_dmac *dmac = chan->dmac;
+	u32 config;
+	u32 bit = chan->bit;
+
+	dbg_showchan(chan);
+
+	pr_debug("%s: clearing interrupts\n", __func__);
+
+	/* clear interrupts */
+	writel(bit, dmac->regs + PL080_TC_CLEAR);
+	writel(bit, dmac->regs + PL080_ERR_CLEAR);
+
+	pr_debug("%s: starting channel\n", __func__);
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config |= PL080_CONFIG_ENABLE;
+
+	pr_debug("%s: writing config %08x\n", __func__, config);
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	return 0;
+}
+
+static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan)
+{
+	u32 config;
+	int timeout;
+
+	pr_debug("%s: stopping channel\n", __func__);
+
+	dbg_showchan(chan);
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config |= PL080_CONFIG_HALT;
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	timeout = 1000;
+	do {
+		config = readl(chan->regs + PL080S_CH_CONFIG);
+		pr_debug("%s: %d - config %08x\n", __func__, timeout, config);
+		if (config & PL080_CONFIG_ACTIVE)
+			udelay(10);
+		else
+			break;
+		} while (--timeout > 0);
+
+	if (config & PL080_CONFIG_ACTIVE) {
+		printk(KERN_ERR "%s: channel still active\n", __func__);
+		return -EFAULT;
+	}
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config &= ~PL080_CONFIG_ENABLE;
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	return 0;
+}
+
+static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan,
+					 struct s3c64xx_dma_buff *buf,
+					 enum s3c2410_dma_buffresult result)
+{
+	if (chan->callback_fn != NULL)
+		(chan->callback_fn)(chan, buf->pw, 0, result);
+}
+
+static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff)
+{
+	dma_pool_free(dma_pool, buff->lli, buff->lli_dma);
+	kfree(buff);
+}
+
+static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
+{
+	struct s3c64xx_dma_buff *buff, *next;
+	u32 config;
+
+	dbg_showchan(chan);
+
+	pr_debug("%s: flushing channel\n", __func__);
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config &= ~PL080_CONFIG_ENABLE;
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	/* dump all the buffers associated with this channel */
+
+	for (buff = chan->curr; buff != NULL; buff = next) {
+		next = buff->next;
+		pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next);
+
+		s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT);
+		s3c64xx_dma_freebuff(buff);
+	}
+
+	chan->curr = chan->next = chan->end = NULL;
+
+	return 0;
+}
+
+int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	switch (op) {
+	case S3C2410_DMAOP_START:
+		return s3c64xx_dma_start(chan);
+
+	case S3C2410_DMAOP_STOP:
+		return s3c64xx_dma_stop(chan);
+
+	case S3C2410_DMAOP_FLUSH:
+		return s3c64xx_dma_flush(chan);
+
+	/* belive PAUSE/RESUME are no-ops */
+	case S3C2410_DMAOP_PAUSE:
+	case S3C2410_DMAOP_RESUME:
+	case S3C2410_DMAOP_STARTED:
+	case S3C2410_DMAOP_TIMEOUT:
+		return 0;
+	}
+
+	return -ENOENT;
+}
+EXPORT_SYMBOL(s3c2410_dma_ctrl);
+
+/* s3c2410_dma_enque
+ *
+ */
+
+int s3c2410_dma_enqueue(unsigned int channel, void *id,
+			dma_addr_t data, int size)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	struct s3c64xx_dma_buff *next;
+	struct s3c64xx_dma_buff *buff;
+	struct pl080s_lli *lli;
+	unsigned long flags;
+	int ret;
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_ATOMIC);
+	if (!buff) {
+		printk(KERN_ERR "%s: no memory for buffer\n", __func__);
+		return -ENOMEM;
+	}
+
+	lli = dma_pool_alloc(dma_pool, GFP_ATOMIC, &buff->lli_dma);
+	if (!lli) {
+		printk(KERN_ERR "%s: no memory for lli\n", __func__);
+		ret = -ENOMEM;
+		goto err_buff;
+	}
+
+	pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n",
+		 __func__, buff, data, lli, (u32)buff->lli_dma, size);
+
+	buff->lli = lli;
+	buff->pw = id;
+
+	s3c64xx_dma_fill_lli(chan, lli, data, size);
+
+	local_irq_save(flags);
+
+	if ((next = chan->next) != NULL) {
+		struct s3c64xx_dma_buff *end = chan->end;
+		struct pl080s_lli *endlli = end->lli;
+
+		pr_debug("enquing onto channel\n");
+
+		end->next = buff;
+		endlli->next_lli = buff->lli_dma;
+
+		if (chan->flags & S3C2410_DMAF_CIRCULAR) {
+			struct s3c64xx_dma_buff *curr = chan->curr;
+			lli->next_lli = curr->lli_dma;
+		}
+
+		if (next == chan->curr) {
+			writel(buff->lli_dma, chan->regs + PL080_CH_LLI);
+			chan->next = buff;
+		}
+
+		show_lli(endlli);
+		chan->end = buff;
+	} else {
+		pr_debug("enquing onto empty channel\n");
+
+		chan->curr = buff;
+		chan->next = buff;
+		chan->end = buff;
+
+		s3c64xx_lli_to_regs(chan, lli);
+	}
+
+	local_irq_restore(flags);
+
+	show_lli(lli);
+
+	dbg_showchan(chan);
+	dbg_showbuffs(chan);
+	return 0;
+
+err_buff:
+	kfree(buff);
+	return ret;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_enqueue);
+
+
+int s3c2410_dma_devconfig(int channel,
+			  enum s3c2410_dmasrc source,
+			  unsigned long devaddr)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	u32 peripheral;
+	u32 config = 0;
+
+	pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n",
+		 __func__, channel, source, devaddr, chan);
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	peripheral = (chan->peripheral & 0xf);
+	chan->source = source;
+	chan->dev_addr = devaddr;
+
+	pr_debug("%s: peripheral %d\n", __func__, peripheral);
+
+	switch (source) {
+	case S3C2410_DMASRC_HW:
+		config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+		config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
+		break;
+	case S3C2410_DMASRC_MEM:
+		config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+		config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
+		break;
+	default:
+		printk(KERN_ERR "%s: bad source\n", __func__);
+		return -EINVAL;
+	}
+
+	/* allow TC and ERR interrupts */
+	config |= PL080_CONFIG_TC_IRQ_MASK;
+	config |= PL080_CONFIG_ERR_IRQ_MASK;
+
+	pr_debug("%s: config %08x\n", __func__, config);
+
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_devconfig);
+
+
+int s3c2410_dma_getposition(unsigned int channel,
+			    dma_addr_t *src, dma_addr_t *dst)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	if (src != NULL)
+		*src = readl(chan->regs + PL080_CH_SRC_ADDR);
+
+	if (dst != NULL)
+		*dst = readl(chan->regs + PL080_CH_DST_ADDR);
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_getposition);
+
+/* s3c2410_request_dma
+ *
+ * get control of an dma channel
+*/
+
+int s3c2410_dma_request(unsigned int channel,
+			struct s3c2410_dma_client *client,
+			void *dev)
+{
+	struct s3c2410_dma_chan *chan;
+	unsigned long flags;
+
+	pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
+		 channel, client->name, dev);
+
+	local_irq_save(flags);
+
+	chan = s3c64xx_dma_map_channel(channel);
+	if (chan == NULL) {
+		local_irq_restore(flags);
+		return -EBUSY;
+	}
+
+	dbg_showchan(chan);
+
+	chan->client = client;
+	chan->in_use = 1;
+	chan->peripheral = channel;
+
+	local_irq_restore(flags);
+
+	/* need to setup */
+
+	pr_debug("%s: channel initialised, %p\n", __func__, chan);
+
+	return chan->number | DMACH_LOW_LEVEL;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_request);
+
+/* s3c2410_dma_free
+ *
+ * release the given channel back to the system, will stop and flush
+ * any outstanding transfers, and ensure the channel is ready for the
+ * next claimant.
+ *
+ * Note, although a warning is currently printed if the freeing client
+ * info is not the same as the registrant's client info, the free is still
+ * allowed to go through.
+*/
+
+int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	unsigned long flags;
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	if (chan->client != client) {
+		printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
+		       channel, chan->client, client);
+	}
+
+	/* sort out stopping and freeing the channel */
+
+
+	chan->client = NULL;
+	chan->in_use = 0;
+
+	if (!(channel & DMACH_LOW_LEVEL))
+		s3c_dma_chan_map[channel] = NULL;
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_free);
+
+static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
+{
+	struct s3c64xx_dmac *dmac = pw;
+	struct s3c2410_dma_chan *chan;
+	enum s3c2410_dma_buffresult res;
+	u32 tcstat, errstat;
+	u32 bit;
+	int offs;
+
+	tcstat = readl(dmac->regs + PL080_TC_STATUS);
+	errstat = readl(dmac->regs + PL080_ERR_STATUS);
+
+	for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
+		struct s3c64xx_dma_buff *buff;
+
+		if (!(errstat & bit) && !(tcstat & bit))
+			continue;
+
+		chan = dmac->channels + offs;
+		res = S3C2410_RES_ERR;
+
+		if (tcstat & bit) {
+			writel(bit, dmac->regs + PL080_TC_CLEAR);
+			res = S3C2410_RES_OK;
+		}
+
+		if (errstat & bit)
+			writel(bit, dmac->regs + PL080_ERR_CLEAR);
+
+		/* 'next' points to the buffer that is next to the
+		 * currently active buffer.
+		 * For CIRCULAR queues, 'next' will be same as 'curr'
+		 * when 'end' is the active buffer.
+		 */
+		buff = chan->curr;
+		while (buff && buff != chan->next
+				&& buff->next != chan->next)
+			buff = buff->next;
+
+		if (!buff)
+			BUG();
+
+		if (buff == chan->next)
+			buff = chan->end;
+
+		s3c64xx_dma_bufffdone(chan, buff, res);
+
+		/* Free the node and update curr, if non-circular queue */
+		if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) {
+			chan->curr = buff->next;
+			s3c64xx_dma_freebuff(buff);
+		}
+
+		/* Update 'next' */
+		buff = chan->next;
+		if (chan->next == chan->end) {
+			chan->next = chan->curr;
+			if (!(chan->flags & S3C2410_DMAF_CIRCULAR))
+				chan->end = NULL;
+		} else {
+			chan->next = buff->next;
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct sysdev_class dma_sysclass = {
+	.name		= "s3c64xx-dma",
+};
+
+static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
+			     int irq, unsigned int base)
+{
+	struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno];
+	struct s3c64xx_dmac *dmac;
+	char clkname[16];
+	void __iomem *regs;
+	void __iomem *regptr;
+	int err, ch;
+
+	dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL);
+	if (!dmac) {
+		printk(KERN_ERR "%s: failed to alloc mem\n", __func__);
+		return -ENOMEM;
+	}
+
+	dmac->sysdev.id = chno / 8;
+	dmac->sysdev.cls = &dma_sysclass;
+
+	err = sysdev_register(&dmac->sysdev);
+	if (err) {
+		printk(KERN_ERR "%s: failed to register sysdevice\n", __func__);
+		goto err_alloc;
+	}
+
+	regs = ioremap(base, 0x200);
+	if (!regs) {
+		printk(KERN_ERR "%s: failed to ioremap()\n", __func__);
+		err = -ENXIO;
+		goto err_dev;
+	}
+
+	snprintf(clkname, sizeof(clkname), "dma%d", dmac->sysdev.id);
+
+	dmac->clk = clk_get(NULL, clkname);
+	if (IS_ERR(dmac->clk)) {
+		printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname);
+		err = PTR_ERR(dmac->clk);
+		goto err_map;
+	}
+
+	clk_enable(dmac->clk);
+
+	dmac->regs = regs;
+	dmac->chanbase = chbase;
+	dmac->channels = chptr;
+
+	err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac);
+	if (err < 0) {
+		printk(KERN_ERR "%s: failed to get irq\n", __func__);
+		goto err_clk;
+	}
+
+	regptr = regs + PL080_Cx_BASE(0);
+
+	for (ch = 0; ch < 8; ch++, chno++, chptr++) {
+		printk(KERN_INFO "%s: registering DMA %d (%p)\n",
+		       __func__, chno, regptr);
+
+		chptr->bit = 1 << ch;
+		chptr->number = chno;
+		chptr->dmac = dmac;
+		chptr->regs = regptr;
+		regptr += PL008_Cx_STRIDE;
+	}
+
+	/* for the moment, permanently enable the controller */
+	writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
+
+	printk(KERN_INFO "PL080: IRQ %d, at %p\n", irq, regs);
+
+	return 0;
+
+err_clk:
+	clk_disable(dmac->clk);
+	clk_put(dmac->clk);
+err_map:
+	iounmap(regs);
+err_dev:
+	sysdev_unregister(&dmac->sysdev);
+err_alloc:
+	kfree(dmac);
+	return err;
+}
+
+static int __init s3c64xx_dma_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
+
+	dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0);
+	if (!dma_pool) {
+		printk(KERN_ERR "%s: failed to create pool\n", __func__);
+		return -ENOMEM;
+	}
+
+	ret = sysdev_class_register(&dma_sysclass);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to create sysclass\n", __func__);
+		return -ENOMEM;
+	}
+
+	/* Set all DMA configuration to be DMA, not SDMA */
+	writel(0xffffff, S3C_SYSREG(0x110));
+
+	/* Register standard DMA controlers */
+	s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
+	s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
+
+	return 0;
+}
+
+arch_initcall(s3c64xx_dma_init);
diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c
new file mode 100644
index 0000000..66e6794
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/gpiolib.c
@@ -0,0 +1,288 @@
+/* arch/arm/plat-s3c64xx/gpiolib.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIOlib support 
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/gpio.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <mach/regs-gpio.h>
+
+/* GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	8	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * D	5	4Bit	Yes	3
+ * E	5	4Bit	Yes	None
+ * F	16	2Bit	Yes	4 [1]
+ * G	7	4Bit	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * K	16	4Bit[2]	No	None
+ * L	15	4Bit[2] No	None
+ * M	6	4Bit	No	IRQ_EINT
+ * N	16	2Bit	No	IRQ_EINT
+ * O	16	2Bit	Yes	7
+ * P	15	2Bit	Yes	8
+ * Q	9	2Bit	Yes	9
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
+	.cfg_eint	= 7,
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
+	.cfg_eint	= 3,
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
+{
+	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
+}
+
+static struct s3c_gpio_chip gpio_4bit[] = {
+	{
+		.base	= S3C64XX_GPA_BASE,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPA(0),
+			.ngpio	= S3C64XX_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.base	= S3C64XX_GPB_BASE,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPB(0),
+			.ngpio	= S3C64XX_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.base	= S3C64XX_GPC_BASE,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPC(0),
+			.ngpio	= S3C64XX_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.base	= S3C64XX_GPD_BASE,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPD(0),
+			.ngpio	= S3C64XX_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.base	= S3C64XX_GPE_BASE,
+		.config	= &gpio_4bit_cfg_noint,
+		.chip	= {
+			.base	= S3C64XX_GPE(0),
+			.ngpio	= S3C64XX_GPIO_E_NR,
+			.label	= "GPE",
+		},
+	}, {
+		.base	= S3C64XX_GPG_BASE,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPG(0),
+			.ngpio	= S3C64XX_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	}, {
+		.base	= S3C64XX_GPM_BASE,
+		.config	= &gpio_4bit_cfg_eint0011,
+		.chip	= {
+			.base	= S3C64XX_GPM(0),
+			.ngpio	= S3C64XX_GPIO_M_NR,
+			.label	= "GPM",
+			.to_irq = s3c64xx_gpio2int_gpm,
+		},
+	},
+};
+
+int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
+{
+	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
+}
+
+static struct s3c_gpio_chip gpio_4bit2[] = {
+	{
+		.base	= S3C64XX_GPH_BASE + 0x4,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPH(0),
+			.ngpio	= S3C64XX_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	}, {
+		.base	= S3C64XX_GPK_BASE + 0x4,
+		.config	= &gpio_4bit_cfg_noint,
+		.chip	= {
+			.base	= S3C64XX_GPK(0),
+			.ngpio	= S3C64XX_GPIO_K_NR,
+			.label	= "GPK",
+		},
+	}, {
+		.base	= S3C64XX_GPL_BASE + 0x4,
+		.config	= &gpio_4bit_cfg_eint0011,
+		.chip	= {
+			.base	= S3C64XX_GPL(0),
+			.ngpio	= S3C64XX_GPIO_L_NR,
+			.label	= "GPL",
+			.to_irq = s3c64xx_gpio2int_gpl,
+		},
+	},
+};
+
+static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
+	.set_config	= s3c_gpio_setcfg_s3c24xx,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
+	.cfg_eint	= 2,
+	.set_config	= s3c_gpio_setcfg_s3c24xx,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
+	.cfg_eint	= 3,
+	.set_config	= s3c_gpio_setcfg_s3c24xx,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+int s3c64xx_gpio2int_gpn(struct gpio_chip *chip, unsigned pin)
+{
+	return IRQ_EINT(0) + pin;
+}
+
+static struct s3c_gpio_chip gpio_2bit[] = {
+	{
+		.base	= S3C64XX_GPF_BASE,
+		.config	= &gpio_2bit_cfg_eint11,
+		.chip	= {
+			.base	= S3C64XX_GPF(0),
+			.ngpio	= S3C64XX_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.base	= S3C64XX_GPI_BASE,
+		.config	= &gpio_2bit_cfg_noint,
+		.chip	= {
+			.base	= S3C64XX_GPI(0),
+			.ngpio	= S3C64XX_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S3C64XX_GPJ_BASE,
+		.config	= &gpio_2bit_cfg_noint,
+		.chip	= {
+			.base	= S3C64XX_GPJ(0),
+			.ngpio	= S3C64XX_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.base	= S3C64XX_GPN_BASE,
+		.config	= &gpio_2bit_cfg_eint10,
+		.chip	= {
+			.base	= S3C64XX_GPN(0),
+			.ngpio	= S3C64XX_GPIO_N_NR,
+			.label	= "GPN",
+			.to_irq = s3c64xx_gpio2int_gpn,
+		},
+	}, {
+		.base	= S3C64XX_GPO_BASE,
+		.config	= &gpio_2bit_cfg_eint11,
+		.chip	= {
+			.base	= S3C64XX_GPO(0),
+			.ngpio	= S3C64XX_GPIO_O_NR,
+			.label	= "GPO",
+		},
+	}, {
+		.base	= S3C64XX_GPP_BASE,
+		.config	= &gpio_2bit_cfg_eint11,
+		.chip	= {
+			.base	= S3C64XX_GPP(0),
+			.ngpio	= S3C64XX_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	}, {
+		.base	= S3C64XX_GPQ_BASE,
+		.config	= &gpio_2bit_cfg_eint11,
+		.chip	= {
+			.base	= S3C64XX_GPQ(0),
+			.ngpio	= S3C64XX_GPIO_Q_NR,
+			.label	= "GPQ",
+		},
+	},
+};
+
+static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
+{
+	chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
+}
+
+static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
+				       int nr_chips,
+				       void (*fn)(struct s3c_gpio_chip *))
+{
+	for (; nr_chips > 0; nr_chips--, chips++) {
+		if (fn)
+			(fn)(chips);
+		s3c_gpiolib_add(chips);
+	}
+}
+
+static __init int s3c64xx_gpiolib_init(void)
+{
+	s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
+			    samsung_gpiolib_add_4bit);
+
+	s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
+			    samsung_gpiolib_add_4bit2);
+
+	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
+			    s3c64xx_gpiolib_add_2bit);
+
+	return 0;
+}
+
+core_initcall(s3c64xx_gpiolib_init);
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
new file mode 100644
index 0000000..b18ac52
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
@@ -0,0 +1,39 @@
+/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C_PA_UART
+		ldrne	\rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
new file mode 100644
index 0000000..0a5d926
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -0,0 +1,127 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - DMA support
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+#define S3C_DMA_CHANNELS	(16)
+
+/* see mach-s3c2410/dma.h for notes on dma channel numbers */
+
+/* Note, for the S3C64XX architecture we keep the DMACH_
+ * defines in the order they are allocated to [S]DMA0/[S]DMA1
+ * so that is easy to do DHACH_ -> DMA controller conversion
+ */
+enum dma_ch {
+	/* DMA0/SDMA0 */
+	DMACH_UART0 = 0,
+	DMACH_UART0_SRC2,
+	DMACH_UART1,
+	DMACH_UART1_SRC2,
+	DMACH_UART2,
+	DMACH_UART2_SRC2,
+	DMACH_UART3,
+	DMACH_UART3_SRC2,
+	DMACH_PCM0_TX,
+	DMACH_PCM0_RX,
+	DMACH_I2S0_OUT,
+	DMACH_I2S0_IN,
+	DMACH_SPI0_TX,
+	DMACH_SPI0_RX,
+	DMACH_HSI_I2SV40_TX,
+	DMACH_HSI_I2SV40_RX,
+
+	/* DMA1/SDMA1 */
+	DMACH_PCM1_TX = 16,
+	DMACH_PCM1_RX,
+	DMACH_I2S1_OUT,
+	DMACH_I2S1_IN,
+	DMACH_SPI1_TX,
+	DMACH_SPI1_RX,
+	DMACH_AC97_PCMOUT,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_MICIN,
+	DMACH_PWM,
+	DMACH_IRDA,
+	DMACH_EXTERNAL,
+	DMACH_RES1,
+	DMACH_RES2,
+	DMACH_SECURITY_RX,	/* SDMA1 only */
+	DMACH_SECURITY_TX,	/* SDMA1 only */
+	DMACH_MAX		/* the end */
+};
+
+static __inline__ bool s3c_dma_has_circular(void)
+{
+	return true;
+}
+
+#define S3C2410_DMAF_CIRCULAR		(1 << 0)
+
+#include <plat/dma.h>
+
+#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
+
+struct s3c64xx_dma_buff;
+
+/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
+ * @next: Pointer to next buffer in queue or ring.
+ * @pw: Client provided identifier
+ * @lli: Pointer to hardware descriptor this buffer is associated with.
+ * @lli_dma: Hardare address of the descriptor.
+ */
+struct s3c64xx_dma_buff {
+	struct s3c64xx_dma_buff *next;
+
+	void			*pw;
+	struct pl080s_lli	*lli;
+	dma_addr_t		 lli_dma;
+};
+
+struct s3c64xx_dmac;
+
+struct s3c2410_dma_chan {
+	unsigned char		 number;      /* number of this dma channel */
+	unsigned char		 in_use;      /* channel allocated */
+	unsigned char		 bit;	      /* bit for enable/disable/etc */
+	unsigned char		 hw_width;
+	unsigned char		 peripheral;
+
+	unsigned int		 flags;
+	enum s3c2410_dmasrc	 source;
+
+
+	dma_addr_t		dev_addr;
+
+	struct s3c2410_dma_client *client;
+	struct s3c64xx_dmac	*dmac;		/* pointer to controller */
+
+	void __iomem		*regs;
+
+	/* cdriver callbacks */
+	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
+	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
+
+	/* buffer list and information */
+	struct s3c64xx_dma_buff	*curr;		/* current dma buffer */
+	struct s3c64xx_dma_buff	*next;		/* next buffer to load */
+	struct s3c64xx_dma_buff	*end;		/* end of queue */
+
+	/* note, when channel is running in circular mode, curr is the
+	 * first buffer enqueued, end is the last and curr is where the
+	 * last buffer-done event is set-at. The buffers are not freed
+	 * and the last buffer hardware descriptor points back to the
+	 * first.
+	 */
+};
+
+#include <plat/dma-core.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
new file mode 100644
index 0000000..dd36260
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Low-level IRQ helper macros for the Samsung S3C64XX series
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <asm/entry-macro-vic2.S>
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
new file mode 100644
index 0000000..34212e1
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
@@ -0,0 +1,48 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank A register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPACON			(S3C64XX_GPA_BASE + 0x00)
+#define S3C64XX_GPADAT			(S3C64XX_GPA_BASE + 0x04)
+#define S3C64XX_GPAPUD			(S3C64XX_GPA_BASE + 0x08)
+#define S3C64XX_GPACONSLP		(S3C64XX_GPA_BASE + 0x0c)
+#define S3C64XX_GPAPUDSLP		(S3C64XX_GPA_BASE + 0x10)
+
+#define S3C64XX_GPA_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S3C64XX_GPA_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S3C64XX_GPA_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPA0_UART_RXD0		(0x02 << 0)
+#define S3C64XX_GPA0_EINT_G1_0		(0x07 << 0)
+
+#define S3C64XX_GPA1_UART_TXD0		(0x02 << 4)
+#define S3C64XX_GPA1_EINT_G1_1		(0x07 << 4)
+
+#define S3C64XX_GPA2_UART_nCTS0		(0x02 << 8)
+#define S3C64XX_GPA2_EINT_G1_2		(0x07 << 8)
+
+#define S3C64XX_GPA3_UART_nRTS0		(0x02 << 12)
+#define S3C64XX_GPA3_EINT_G1_3		(0x07 << 12)
+
+#define S3C64XX_GPA4_UART_RXD1		(0x02 << 16)
+#define S3C64XX_GPA4_EINT_G1_4		(0x07 << 16)
+
+#define S3C64XX_GPA5_UART_TXD1		(0x02 << 20)
+#define S3C64XX_GPA5_EINT_G1_5		(0x07 << 20)
+
+#define S3C64XX_GPA6_UART_nCTS1		(0x02 << 24)
+#define S3C64XX_GPA6_EINT_G1_6		(0x07 << 24)
+
+#define S3C64XX_GPA7_UART_nRTS1		(0x02 << 28)
+#define S3C64XX_GPA7_EINT_G1_7		(0x07 << 28)
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
new file mode 100644
index 0000000..7232c03
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
@@ -0,0 +1,60 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank B register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPBCON			(S3C64XX_GPB_BASE + 0x00)
+#define S3C64XX_GPBDAT			(S3C64XX_GPB_BASE + 0x04)
+#define S3C64XX_GPBPUD			(S3C64XX_GPB_BASE + 0x08)
+#define S3C64XX_GPBCONSLP		(S3C64XX_GPB_BASE + 0x0c)
+#define S3C64XX_GPBPUDSLP		(S3C64XX_GPB_BASE + 0x10)
+
+#define S3C64XX_GPB_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S3C64XX_GPB_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S3C64XX_GPB_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPB0_UART_RXD2		(0x02 << 0)
+#define S3C64XX_GPB0_EXTDMA_REQ		(0x03 << 0)
+#define S3C64XX_GPB0_IrDA_RXD		(0x04 << 0)
+#define S3C64XX_GPB0_ADDR_CF0		(0x05 << 0)
+#define S3C64XX_GPB0_EINT_G1_8		(0x07 << 0)
+
+#define S3C64XX_GPB1_UART_TXD2		(0x02 << 4)
+#define S3C64XX_GPB1_EXTDMA_ACK		(0x03 << 4)
+#define S3C64XX_GPB1_IrDA_TXD		(0x04 << 4)
+#define S3C64XX_GPB1_ADDR_CF1		(0x05 << 4)
+#define S3C64XX_GPB1_EINT_G1_9		(0x07 << 4)
+
+#define S3C64XX_GPB2_UART_RXD3		(0x02 << 8)
+#define S3C64XX_GPB2_IrDA_RXD		(0x03 << 8)
+#define S3C64XX_GPB2_EXTDMA_REQ		(0x04 << 8)
+#define S3C64XX_GPB2_ADDR_CF2		(0x05 << 8)
+#define S3C64XX_GPB2_I2C_SCL1		(0x06 << 8)
+#define S3C64XX_GPB2_EINT_G1_10		(0x07 << 8)
+
+#define S3C64XX_GPB3_UART_TXD3		(0x02 << 12)
+#define S3C64XX_GPB3_IrDA_TXD		(0x03 << 12)
+#define S3C64XX_GPB3_EXTDMA_ACK		(0x04 << 12)
+#define S3C64XX_GPB3_I2C_SDA1		(0x06 << 12)
+#define S3C64XX_GPB3_EINT_G1_11		(0x07 << 12)
+
+#define S3C64XX_GPB4_IrDA_SDBW		(0x02 << 16)
+#define S3C64XX_GPB4_CAM_FIELD		(0x03 << 16)
+#define S3C64XX_GPB4_CF_DATA_DIR	(0x04 << 16)
+#define S3C64XX_GPB4_EINT_G1_12		(0x07 << 16)
+
+#define S3C64XX_GPB5_I2C_SCL0		(0x02 << 20)
+#define S3C64XX_GPB5_EINT_G1_13		(0x07 << 20)
+
+#define S3C64XX_GPB6_I2C_SDA0		(0x02 << 24)
+#define S3C64XX_GPB6_EINT_G1_14		(0x07 << 24)
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
new file mode 100644
index 0000000..db189ab
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
@@ -0,0 +1,53 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank C register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPCCON			(S3C64XX_GPC_BASE + 0x00)
+#define S3C64XX_GPCDAT			(S3C64XX_GPC_BASE + 0x04)
+#define S3C64XX_GPCPUD			(S3C64XX_GPC_BASE + 0x08)
+#define S3C64XX_GPCCONSLP		(S3C64XX_GPC_BASE + 0x0c)
+#define S3C64XX_GPCPUDSLP		(S3C64XX_GPC_BASE + 0x10)
+
+#define S3C64XX_GPC_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S3C64XX_GPC_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S3C64XX_GPC_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPC0_SPI_MISO0		(0x02 << 0)
+#define S3C64XX_GPC0_EINT_G2_0		(0x07 << 0)
+
+#define S3C64XX_GPC1_SPI_CLKO		(0x02 << 4)
+#define S3C64XX_GPC1_EINT_G2_1		(0x07 << 4)
+
+#define S3C64XX_GPC2_SPI_MOSIO		(0x02 << 8)
+#define S3C64XX_GPC2_EINT_G2_2		(0x07 << 8)
+
+#define S3C64XX_GPC3_SPI_nCSO		(0x02 << 12)
+#define S3C64XX_GPC3_EINT_G2_3		(0x07 << 12)
+
+#define S3C64XX_GPC4_SPI_MISO1		(0x02 << 16)
+#define S3C64XX_GPC4_MMC2_CMD		(0x03 << 16)
+#define S3C64XX_GPC4_I2S_V40_DO0	(0x05 << 16)
+#define S3C64XX_GPC4_EINT_G2_4		(0x07 << 16)
+
+#define S3C64XX_GPC5_SPI_CLK1		(0x02 << 20)
+#define S3C64XX_GPC5_MMC2_CLK		(0x03 << 20)
+#define S3C64XX_GPC5_I2S_V40_DO1	(0x05 << 20)
+#define S3C64XX_GPC5_EINT_G2_5		(0x07 << 20)
+
+#define S3C64XX_GPC6_SPI_MOSI1		(0x02 << 24)
+#define S3C64XX_GPC6_EINT_G2_6		(0x07 << 24)
+
+#define S3C64XX_GPC7_SPI_nCS1		(0x02 << 28)
+#define S3C64XX_GPC7_I2S_V40_DO2	(0x05 << 28)
+#define S3C64XX_GPC7_EINT_G2_7		(0x07 << 28)
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
new file mode 100644
index 0000000..1a01cee
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
@@ -0,0 +1,49 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank D register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPDCON			(S3C64XX_GPD_BASE + 0x00)
+#define S3C64XX_GPDDAT			(S3C64XX_GPD_BASE + 0x04)
+#define S3C64XX_GPDPUD			(S3C64XX_GPD_BASE + 0x08)
+#define S3C64XX_GPDCONSLP		(S3C64XX_GPD_BASE + 0x0c)
+#define S3C64XX_GPDPUDSLP		(S3C64XX_GPD_BASE + 0x10)
+
+#define S3C64XX_GPD_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S3C64XX_GPD_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S3C64XX_GPD_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPD0_PCM0_SCLK		(0x02 << 0)
+#define S3C64XX_GPD0_I2S0_CLK		(0x03 << 0)
+#define S3C64XX_GPD0_AC97_BITCLK	(0x04 << 0)
+#define S3C64XX_GPD0_EINT_G3_0		(0x07 << 0)
+
+#define S3C64XX_GPD1_PCM0_EXTCLK	(0x02 << 4)
+#define S3C64XX_GPD1_I2S0_CDCLK		(0x03 << 4)
+#define S3C64XX_GPD1_AC97_nRESET	(0x04 << 4)
+#define S3C64XX_GPD1_EINT_G3_1		(0x07 << 4)
+
+#define S3C64XX_GPD2_PCM0_FSYNC		(0x02 << 8)
+#define S3C64XX_GPD2_I2S0_LRCLK		(0x03 << 8)
+#define S3C64XX_GPD2_AC97_SYNC		(0x04 << 8)
+#define S3C64XX_GPD2_EINT_G3_2		(0x07 << 8)
+
+#define S3C64XX_GPD3_PCM0_SIN		(0x02 << 12)
+#define S3C64XX_GPD3_I2S0_DI		(0x03 << 12)
+#define S3C64XX_GPD3_AC97_SDI		(0x04 << 12)
+#define S3C64XX_GPD3_EINT_G3_3		(0x07 << 12)
+
+#define S3C64XX_GPD4_PCM0_SOUT		(0x02 << 16)
+#define S3C64XX_GPD4_I2S0_D0		(0x03 << 16)
+#define S3C64XX_GPD4_AC97_SDO		(0x04 << 16)
+#define S3C64XX_GPD4_EINT_G3_4		(0x07 << 16)
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
new file mode 100644
index 0000000..f057adb
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
@@ -0,0 +1,44 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank E register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPECON			(S3C64XX_GPE_BASE + 0x00)
+#define S3C64XX_GPEDAT			(S3C64XX_GPE_BASE + 0x04)
+#define S3C64XX_GPEPUD			(S3C64XX_GPE_BASE + 0x08)
+#define S3C64XX_GPECONSLP		(S3C64XX_GPE_BASE + 0x0c)
+#define S3C64XX_GPEPUDSLP		(S3C64XX_GPE_BASE + 0x10)
+
+#define S3C64XX_GPE_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S3C64XX_GPE_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S3C64XX_GPE_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPE0_PCM1_SCLK		(0x02 << 0)
+#define S3C64XX_GPE0_I2S1_CLK		(0x03 << 0)
+#define S3C64XX_GPE0_AC97_BITCLK	(0x04 << 0)
+
+#define S3C64XX_GPE1_PCM1_EXTCLK	(0x02 << 4)
+#define S3C64XX_GPE1_I2S1_CDCLK		(0x03 << 4)
+#define S3C64XX_GPE1_AC97_nRESET	(0x04 << 4)
+
+#define S3C64XX_GPE2_PCM1_FSYNC		(0x02 << 8)
+#define S3C64XX_GPE2_I2S1_LRCLK		(0x03 << 8)
+#define S3C64XX_GPE2_AC97_SYNC		(0x04 << 8)
+
+#define S3C64XX_GPE3_PCM1_SIN		(0x02 << 12)
+#define S3C64XX_GPE3_I2S1_DI		(0x03 << 12)
+#define S3C64XX_GPE3_AC97_SDI		(0x04 << 12)
+
+#define S3C64XX_GPE4_PCM1_SOUT		(0x02 << 16)
+#define S3C64XX_GPE4_I2S1_D0		(0x03 << 16)
+#define S3C64XX_GPE4_AC97_SDO		(0x04 << 16)
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
new file mode 100644
index 0000000..62ab8f5
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
@@ -0,0 +1,71 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank F register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPFCON			(S3C64XX_GPF_BASE + 0x00)
+#define S3C64XX_GPFDAT			(S3C64XX_GPF_BASE + 0x04)
+#define S3C64XX_GPFPUD			(S3C64XX_GPF_BASE + 0x08)
+#define S3C64XX_GPFCONSLP		(S3C64XX_GPF_BASE + 0x0c)
+#define S3C64XX_GPFPUDSLP		(S3C64XX_GPF_BASE + 0x10)
+
+#define S3C64XX_GPF_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPF_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S3C64XX_GPF_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPF0_CAMIF_CLK		(0x02 << 0)
+#define S3C64XX_GPF0_EINT_G4_0		(0x03 << 0)
+
+#define S3C64XX_GPF1_CAMIF_HREF		(0x02 << 2)
+#define S3C64XX_GPF1_EINT_G4_1		(0x03 << 2)
+
+#define S3C64XX_GPF2_CAMIF_PCLK		(0x02 << 4)
+#define S3C64XX_GPF2_EINT_G4_2		(0x03 << 4)
+
+#define S3C64XX_GPF3_CAMIF_nRST		(0x02 << 6)
+#define S3C64XX_GPF3_EINT_G4_3		(0x03 << 6)
+
+#define S3C64XX_GPF4_CAMIF_VSYNC	(0x02 << 8)
+#define S3C64XX_GPF4_EINT_G4_4		(0x03 << 8)
+
+#define S3C64XX_GPF5_CAMIF_YDATA0	(0x02 << 10)
+#define S3C64XX_GPF5_EINT_G4_5		(0x03 << 10)
+
+#define S3C64XX_GPF6_CAMIF_YDATA1	(0x02 << 12)
+#define S3C64XX_GPF6_EINT_G4_6		(0x03 << 12)
+
+#define S3C64XX_GPF7_CAMIF_YDATA2	(0x02 << 14)
+#define S3C64XX_GPF7_EINT_G4_7		(0x03 << 14)
+
+#define S3C64XX_GPF8_CAMIF_YDATA3	(0x02 << 16)
+#define S3C64XX_GPF8_EINT_G4_8		(0x03 << 16)
+
+#define S3C64XX_GPF9_CAMIF_YDATA4	(0x02 << 18)
+#define S3C64XX_GPF9_EINT_G4_9		(0x03 << 18)
+
+#define S3C64XX_GPF10_CAMIF_YDATA5	(0x02 << 20)
+#define S3C64XX_GPF10_EINT_G4_10	(0x03 << 20)
+
+#define S3C64XX_GPF11_CAMIF_YDATA6	(0x02 << 22)
+#define S3C64XX_GPF11_EINT_G4_11	(0x03 << 22)
+
+#define S3C64XX_GPF12_CAMIF_YDATA7	(0x02 << 24)
+#define S3C64XX_GPF12_EINT_G4_12	(0x03 << 24)
+
+#define S3C64XX_GPF13_PWM_ECLK		(0x02 << 26)
+#define S3C64XX_GPF13_EINT_G4_13	(0x03 << 26)
+
+#define S3C64XX_GPF14_PWM_TOUT0		(0x02 << 28)
+#define S3C64XX_GPF14_CLKOUT0		(0x03 << 28)
+
+#define S3C64XX_GPF15_PWM_TOUT1		(0x02 << 30)
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
new file mode 100644
index 0000000..b94954a
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
@@ -0,0 +1,42 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank G register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPGCON			(S3C64XX_GPG_BASE + 0x00)
+#define S3C64XX_GPGDAT			(S3C64XX_GPG_BASE + 0x04)
+#define S3C64XX_GPGPUD			(S3C64XX_GPG_BASE + 0x08)
+#define S3C64XX_GPGCONSLP		(S3C64XX_GPG_BASE + 0x0c)
+#define S3C64XX_GPGPUDSLP		(S3C64XX_GPG_BASE + 0x10)
+
+#define S3C64XX_GPG_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S3C64XX_GPG_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S3C64XX_GPG_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPG0_MMC0_CLK		(0x02 << 0)
+#define S3C64XX_GPG0_EINT_G5_0		(0x07 << 0)
+
+#define S3C64XX_GPG1_MMC0_CMD		(0x02 << 4)
+#define S3C64XX_GPG1_EINT_G5_1		(0x07 << 4)
+
+#define S3C64XX_GPG2_MMC0_DATA0		(0x02 << 8)
+#define S3C64XX_GPG2_EINT_G5_2		(0x07 << 8)
+
+#define S3C64XX_GPG3_MMC0_DATA1		(0x02 << 12)
+#define S3C64XX_GPG3_EINT_G5_3		(0x07 << 12)
+
+#define S3C64XX_GPG4_MMC0_DATA2		(0x02 << 16)
+#define S3C64XX_GPG4_EINT_G5_4		(0x07 << 16)
+
+#define S3C64XX_GPG5_MMC0_DATA3		(0x02 << 20)
+#define S3C64XX_GPG5_EINT_G5_5		(0x07 << 20)
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
new file mode 100644
index 0000000..5d75aaa
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
@@ -0,0 +1,74 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank H register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPHCON0			(S3C64XX_GPH_BASE + 0x00)
+#define S3C64XX_GPHCON1			(S3C64XX_GPH_BASE + 0x04)
+#define S3C64XX_GPHDAT			(S3C64XX_GPH_BASE + 0x08)
+#define S3C64XX_GPHPUD			(S3C64XX_GPH_BASE + 0x0c)
+#define S3C64XX_GPHCONSLP		(S3C64XX_GPH_BASE + 0x10)
+#define S3C64XX_GPHPUDSLP		(S3C64XX_GPH_BASE + 0x14)
+
+#define S3C64XX_GPH_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S3C64XX_GPH_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S3C64XX_GPH_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPH0_MMC1_CLK		(0x02 << 0)
+#define S3C64XX_GPH0_KP_COL0		(0x04 << 0)
+#define S3C64XX_GPH0_EINT_G6_0		(0x07 << 0)
+
+#define S3C64XX_GPH1_MMC1_CMD		(0x02 << 4)
+#define S3C64XX_GPH1_KP_COL1		(0x04 << 4)
+#define S3C64XX_GPH1_EINT_G6_1		(0x07 << 4)
+
+#define S3C64XX_GPH2_MMC1_DATA0		(0x02 << 8)
+#define S3C64XX_GPH2_KP_COL2		(0x04 << 8)
+#define S3C64XX_GPH2_EINT_G6_2		(0x07 << 8)
+
+#define S3C64XX_GPH3_MMC1_DATA1		(0x02 << 12)
+#define S3C64XX_GPH3_KP_COL3		(0x04 << 12)
+#define S3C64XX_GPH3_EINT_G6_3		(0x07 << 12)
+
+#define S3C64XX_GPH4_MMC1_DATA2		(0x02 << 16)
+#define S3C64XX_GPH4_KP_COL4		(0x04 << 16)
+#define S3C64XX_GPH4_EINT_G6_4		(0x07 << 16)
+
+#define S3C64XX_GPH5_MMC1_DATA3		(0x02 << 20)
+#define S3C64XX_GPH5_KP_COL5		(0x04 << 20)
+#define S3C64XX_GPH5_EINT_G6_5		(0x07 << 20)
+
+#define S3C64XX_GPH6_MMC1_DATA4		(0x02 << 24)
+#define S3C64XX_GPH6_MMC2_DATA0		(0x03 << 24)
+#define S3C64XX_GPH6_KP_COL6		(0x04 << 24)
+#define S3C64XX_GPH6_I2S_V40_BCLK	(0x05 << 24)
+#define S3C64XX_GPH6_ADDR_CF0		(0x06 << 24)
+#define S3C64XX_GPH6_EINT_G6_6		(0x07 << 24)
+
+#define S3C64XX_GPH7_MMC1_DATA5		(0x02 << 28)
+#define S3C64XX_GPH7_MMC2_DATA1		(0x03 << 28)
+#define S3C64XX_GPH7_KP_COL7		(0x04 << 28)
+#define S3C64XX_GPH7_I2S_V40_CDCLK	(0x05 << 28)
+#define S3C64XX_GPH7_ADDR_CF1		(0x06 << 28)
+#define S3C64XX_GPH7_EINT_G6_7		(0x07 << 28)
+
+#define S3C64XX_GPH8_MMC1_DATA6		(0x02 <<  0)
+#define S3C64XX_GPH8_MMC2_DATA2		(0x03 <<  0)
+#define S3C64XX_GPH8_I2S_V40_LRCLK	(0x05 <<  0)
+#define S3C64XX_GPH8_ADDR_CF2		(0x06 <<  0)
+#define S3C64XX_GPH8_EINT_G6_8		(0x07 <<  0)
+
+#define S3C64XX_GPH9_OUTPUT		(0x01 <<  4)
+#define S3C64XX_GPH9_MMC1_DATA7		(0x02 <<  4)
+#define S3C64XX_GPH9_MMC2_DATA3		(0x03 <<  4)
+#define S3C64XX_GPH9_I2S_V40_DI		(0x05 <<  4)
+#define S3C64XX_GPH9_EINT_G6_9		(0x07 <<  4)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
new file mode 100644
index 0000000..4ceaa60
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
@@ -0,0 +1,40 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank I register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPICON			(S3C64XX_GPI_BASE + 0x00)
+#define S3C64XX_GPIDAT			(S3C64XX_GPI_BASE + 0x04)
+#define S3C64XX_GPIPUD			(S3C64XX_GPI_BASE + 0x08)
+#define S3C64XX_GPICONSLP		(S3C64XX_GPI_BASE + 0x0c)
+#define S3C64XX_GPIPUDSLP		(S3C64XX_GPI_BASE + 0x10)
+
+#define S3C64XX_GPI_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPI_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S3C64XX_GPI_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPI0_VD0		(0x02 << 0)
+#define S3C64XX_GPI1_VD1		(0x02 << 2)
+#define S3C64XX_GPI2_VD2		(0x02 << 4)
+#define S3C64XX_GPI3_VD3		(0x02 << 6)
+#define S3C64XX_GPI4_VD4		(0x02 << 8)
+#define S3C64XX_GPI5_VD5		(0x02 << 10)
+#define S3C64XX_GPI6_VD6		(0x02 << 12)
+#define S3C64XX_GPI7_VD7		(0x02 << 14)
+#define S3C64XX_GPI8_VD8		(0x02 << 16)
+#define S3C64XX_GPI9_VD9		(0x02 << 18)
+#define S3C64XX_GPI10_VD10		(0x02 << 20)
+#define S3C64XX_GPI11_VD11		(0x02 << 22)
+#define S3C64XX_GPI12_VD12		(0x02 << 24)
+#define S3C64XX_GPI13_VD13		(0x02 << 26)
+#define S3C64XX_GPI14_VD14		(0x02 << 28)
+#define S3C64XX_GPI15_VD15		(0x02 << 30)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
new file mode 100644
index 0000000..6f25cd0
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
@@ -0,0 +1,36 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank J register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPJCON			(S3C64XX_GPJ_BASE + 0x00)
+#define S3C64XX_GPJDAT			(S3C64XX_GPJ_BASE + 0x04)
+#define S3C64XX_GPJPUD			(S3C64XX_GPJ_BASE + 0x08)
+#define S3C64XX_GPJCONSLP		(S3C64XX_GPJ_BASE + 0x0c)
+#define S3C64XX_GPJPUDSLP		(S3C64XX_GPJ_BASE + 0x10)
+
+#define S3C64XX_GPJ_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPJ_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S3C64XX_GPJ_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPJ0_VD16		(0x02 << 0)
+#define S3C64XX_GPJ1_VD17		(0x02 << 2)
+#define S3C64XX_GPJ2_VD18		(0x02 << 4)
+#define S3C64XX_GPJ3_VD19		(0x02 << 6)
+#define S3C64XX_GPJ4_VD20		(0x02 << 8)
+#define S3C64XX_GPJ5_VD21		(0x02 << 10)
+#define S3C64XX_GPJ6_VD22		(0x02 << 12)
+#define S3C64XX_GPJ7_VD23		(0x02 << 14)
+#define S3C64XX_GPJ8_LCD_HSYNC		(0x02 << 16)
+#define S3C64XX_GPJ9_LCD_VSYNC		(0x02 << 18)
+#define S3C64XX_GPJ10_LCD_VDEN		(0x02 << 20)
+#define S3C64XX_GPJ11_LCD_VCLK		(0x02 << 22)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
new file mode 100644
index 0000000..d0aeda1
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
@@ -0,0 +1,54 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank N register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPNCON			(S3C64XX_GPN_BASE + 0x00)
+#define S3C64XX_GPNDAT			(S3C64XX_GPN_BASE + 0x04)
+#define S3C64XX_GPNPUD			(S3C64XX_GPN_BASE + 0x08)
+
+#define S3C64XX_GPN_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPN_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S3C64XX_GPN_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPN0_EINT0		(0x02 << 0)
+#define S3C64XX_GPN0_KP_ROW0		(0x03 << 0)
+
+#define S3C64XX_GPN1_EINT1		(0x02 << 2)
+#define S3C64XX_GPN1_KP_ROW1		(0x03 << 2)
+
+#define S3C64XX_GPN2_EINT2		(0x02 << 4)
+#define S3C64XX_GPN2_KP_ROW2		(0x03 << 4)
+
+#define S3C64XX_GPN3_EINT3		(0x02 << 6)
+#define S3C64XX_GPN3_KP_ROW3		(0x03 << 6)
+
+#define S3C64XX_GPN4_EINT4		(0x02 << 8)
+#define S3C64XX_GPN4_KP_ROW4		(0x03 << 8)
+
+#define S3C64XX_GPN5_EINT5		(0x02 << 10)
+#define S3C64XX_GPN5_KP_ROW5		(0x03 << 10)
+
+#define S3C64XX_GPN6_EINT6		(0x02 << 12)
+#define S3C64XX_GPN6_KP_ROW6		(0x03 << 12)
+
+#define S3C64XX_GPN7_EINT7		(0x02 << 14)
+#define S3C64XX_GPN7_KP_ROW7		(0x03 << 14)
+
+#define S3C64XX_GPN8_EINT8		(0x02 << 16)
+#define S3C64XX_GPN9_EINT9		(0x02 << 18)
+#define S3C64XX_GPN10_EINT10		(0x02 << 20)
+#define S3C64XX_GPN11_EINT11		(0x02 << 22)
+#define S3C64XX_GPN12_EINT12		(0x02 << 24)
+#define S3C64XX_GPN13_EINT13		(0x02 << 26)
+#define S3C64XX_GPN14_EINT14		(0x02 << 28)
+#define S3C64XX_GPN15_EINT15		(0x02 << 30)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
new file mode 100644
index 0000000..21868fa
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank O register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPOCON			(S3C64XX_GPO_BASE + 0x00)
+#define S3C64XX_GPODAT			(S3C64XX_GPO_BASE + 0x04)
+#define S3C64XX_GPOPUD			(S3C64XX_GPO_BASE + 0x08)
+#define S3C64XX_GPOCONSLP		(S3C64XX_GPO_BASE + 0x0c)
+#define S3C64XX_GPOPUDSLP		(S3C64XX_GPO_BASE + 0x10)
+
+#define S3C64XX_GPO_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPO_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S3C64XX_GPO_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPO0_MEM0_nCS2		(0x02 << 0)
+#define S3C64XX_GPO0_EINT_G7_0		(0x03 << 0)
+
+#define S3C64XX_GPO1_MEM0_nCS3		(0x02 << 2)
+#define S3C64XX_GPO1_EINT_G7_1		(0x03 << 2)
+
+#define S3C64XX_GPO2_MEM0_nCS4		(0x02 << 4)
+#define S3C64XX_GPO2_EINT_G7_2		(0x03 << 4)
+
+#define S3C64XX_GPO3_MEM0_nCS5		(0x02 << 6)
+#define S3C64XX_GPO3_EINT_G7_3		(0x03 << 6)
+
+#define S3C64XX_GPO4_EINT_G7_4		(0x03 << 8)
+
+#define S3C64XX_GPO5_EINT_G7_5		(0x03 << 10)
+
+#define S3C64XX_GPO6_MEM0_ADDR6		(0x02 << 12)
+#define S3C64XX_GPO6_EINT_G7_6		(0x03 << 12)
+
+#define S3C64XX_GPO7_MEM0_ADDR7		(0x02 << 14)
+#define S3C64XX_GPO7_EINT_G7_7		(0x03 << 14)
+
+#define S3C64XX_GPO8_MEM0_ADDR8		(0x02 << 16)
+#define S3C64XX_GPO8_EINT_G7_8		(0x03 << 16)
+
+#define S3C64XX_GPO9_MEM0_ADDR9		(0x02 << 18)
+#define S3C64XX_GPO9_EINT_G7_9		(0x03 << 18)
+
+#define S3C64XX_GPO10_MEM0_ADDR10	(0x02 << 20)
+#define S3C64XX_GPO10_EINT_G7_10	(0x03 << 20)
+
+#define S3C64XX_GPO11_MEM0_ADDR11	(0x02 << 22)
+#define S3C64XX_GPO11_EINT_G7_11	(0x03 << 22)
+
+#define S3C64XX_GPO12_MEM0_ADDR12	(0x02 << 24)
+#define S3C64XX_GPO12_EINT_G7_12	(0x03 << 24)
+
+#define S3C64XX_GPO13_MEM0_ADDR13	(0x02 << 26)
+#define S3C64XX_GPO13_EINT_G7_13	(0x03 << 26)
+
+#define S3C64XX_GPO14_MEM0_ADDR14	(0x02 << 28)
+#define S3C64XX_GPO14_EINT_G7_14	(0x03 << 28)
+
+#define S3C64XX_GPO15_MEM0_ADDR15	(0x02 << 30)
+#define S3C64XX_GPO15_EINT_G7_15	(0x03 << 30)
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
new file mode 100644
index 0000000..46bcfb6
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
@@ -0,0 +1,69 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank P register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPPCON			(S3C64XX_GPP_BASE + 0x00)
+#define S3C64XX_GPPDAT			(S3C64XX_GPP_BASE + 0x04)
+#define S3C64XX_GPPPUD			(S3C64XX_GPP_BASE + 0x08)
+#define S3C64XX_GPPCONSLP		(S3C64XX_GPP_BASE + 0x0c)
+#define S3C64XX_GPPPUDSLP		(S3C64XX_GPP_BASE + 0x10)
+
+#define S3C64XX_GPP_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPP_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S3C64XX_GPP_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPP0_MEM0_ADDRV		(0x02 << 0)
+#define S3C64XX_GPP0_EINT_G8_0		(0x03 << 0)
+
+#define S3C64XX_GPP1_MEM0_SMCLK		(0x02 << 2)
+#define S3C64XX_GPP1_EINT_G8_1		(0x03 << 2)
+
+#define S3C64XX_GPP2_MEM0_nWAIT		(0x02 << 4)
+#define S3C64XX_GPP2_EINT_G8_2		(0x03 << 4)
+
+#define S3C64XX_GPP3_MEM0_RDY0_ALE	(0x02 << 6)
+#define S3C64XX_GPP3_EINT_G8_3		(0x03 << 6)
+
+#define S3C64XX_GPP4_MEM0_RDY1_CLE	(0x02 << 8)
+#define S3C64XX_GPP4_EINT_G8_4		(0x03 << 8)
+
+#define S3C64XX_GPP5_MEM0_INTsm0_FWE	(0x02 << 10)
+#define S3C64XX_GPP5_EINT_G8_5		(0x03 << 10)
+
+#define S3C64XX_GPP6_MEM0_(null)	(0x02 << 12)
+#define S3C64XX_GPP6_EINT_G8_6		(0x03 << 12)
+
+#define S3C64XX_GPP7_MEM0_INTsm1_FRE	(0x02 << 14)
+#define S3C64XX_GPP7_EINT_G8_7		(0x03 << 14)
+
+#define S3C64XX_GPP8_MEM0_RPn_RnB	(0x02 << 16)
+#define S3C64XX_GPP8_EINT_G8_8		(0x03 << 16)
+
+#define S3C64XX_GPP9_MEM0_ATA_RESET	(0x02 << 18)
+#define S3C64XX_GPP9_EINT_G8_9		(0x03 << 18)
+
+#define S3C64XX_GPP10_MEM0_ATA_INPACK	(0x02 << 20)
+#define S3C64XX_GPP10_EINT_G8_10	(0x03 << 20)
+
+#define S3C64XX_GPP11_MEM0_ATA_REG	(0x02 << 22)
+#define S3C64XX_GPP11_EINT_G8_11	(0x03 << 22)
+
+#define S3C64XX_GPP12_MEM0_ATA_WE	(0x02 << 24)
+#define S3C64XX_GPP12_EINT_G8_12	(0x03 << 24)
+
+#define S3C64XX_GPP13_MEM0_ATA_OE	(0x02 << 26)
+#define S3C64XX_GPP13_EINT_G8_13	(0x03 << 26)
+
+#define S3C64XX_GPP14_MEM0_ATA_CD	(0x02 << 28)
+#define S3C64XX_GPP14_EINT_G8_14	(0x03 << 28)
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
new file mode 100644
index 0000000..1712223
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
@@ -0,0 +1,46 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank Q register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPQCON			(S3C64XX_GPQ_BASE + 0x00)
+#define S3C64XX_GPQDAT			(S3C64XX_GPQ_BASE + 0x04)
+#define S3C64XX_GPQPUD			(S3C64XX_GPQ_BASE + 0x08)
+#define S3C64XX_GPQCONSLP		(S3C64XX_GPQ_BASE + 0x0c)
+#define S3C64XX_GPQPUDSLP		(S3C64XX_GPQ_BASE + 0x10)
+
+#define S3C64XX_GPQ_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPQ_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S3C64XX_GPQ_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPQ0_MEM0_ADDR18_RAS	(0x02 << 0)
+#define S3C64XX_GPQ0_EINT_G9_0		(0x03 << 0)
+
+#define S3C64XX_GPQ1_MEM0_ADDR19_CAS	(0x02 << 2)
+#define S3C64XX_GPQ1_EINT_G9_1		(0x03 << 2)
+
+#define S3C64XX_GPQ2_EINT_G9_2		(0x03 << 4)
+
+#define S3C64XX_GPQ3_EINT_G9_3		(0x03 << 6)
+
+#define S3C64XX_GPQ4_EINT_G9_4		(0x03 << 8)
+
+#define S3C64XX_GPQ5_EINT_G9_5		(0x03 << 10)
+
+#define S3C64XX_GPQ6_EINT_G9_6		(0x03 << 12)
+
+#define S3C64XX_GPQ7_MEM0_ADDR17_WENDMC	(0x02 << 14)
+#define S3C64XX_GPQ7_EINT_G9_7		(0x03 << 14)
+
+#define S3C64XX_GPQ8_MEM0_ADDR16_APDMC	(0x02 << 16)
+#define S3C64XX_GPQ8_EINT_G9_8		(0x03 << 16)
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio.h b/arch/arm/mach-s3c64xx/include/mach/gpio.h
new file mode 100644
index 0000000..e8e35e8
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio.h
@@ -0,0 +1,96 @@
+/* arch/arm/mach-s3c6400/include/mach/gpio.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* GPIO bank sizes */
+#define S3C64XX_GPIO_A_NR	(8)
+#define S3C64XX_GPIO_B_NR	(7)
+#define S3C64XX_GPIO_C_NR	(8)
+#define S3C64XX_GPIO_D_NR	(5)
+#define S3C64XX_GPIO_E_NR	(5)
+#define S3C64XX_GPIO_F_NR	(16)
+#define S3C64XX_GPIO_G_NR	(7)
+#define S3C64XX_GPIO_H_NR	(10)
+#define S3C64XX_GPIO_I_NR	(16)
+#define S3C64XX_GPIO_J_NR	(12)
+#define S3C64XX_GPIO_K_NR	(16)
+#define S3C64XX_GPIO_L_NR	(15)
+#define S3C64XX_GPIO_M_NR	(6)
+#define S3C64XX_GPIO_N_NR	(16)
+#define S3C64XX_GPIO_O_NR	(16)
+#define S3C64XX_GPIO_P_NR	(15)
+#define S3C64XX_GPIO_Q_NR	(9)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S3C64XX_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s3c_gpio_number {
+	S3C64XX_GPIO_A_START = 0,
+	S3C64XX_GPIO_B_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_A),
+	S3C64XX_GPIO_C_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_B),
+	S3C64XX_GPIO_D_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_C),
+	S3C64XX_GPIO_E_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_D),
+	S3C64XX_GPIO_F_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_E),
+	S3C64XX_GPIO_G_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_F),
+	S3C64XX_GPIO_H_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_G),
+	S3C64XX_GPIO_I_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_H),
+	S3C64XX_GPIO_J_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_I),
+	S3C64XX_GPIO_K_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_J),
+	S3C64XX_GPIO_L_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_K),
+	S3C64XX_GPIO_M_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_L),
+	S3C64XX_GPIO_N_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_M),
+	S3C64XX_GPIO_O_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_N),
+	S3C64XX_GPIO_P_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_O),
+	S3C64XX_GPIO_Q_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_P),
+};
+
+/* S3C64XX GPIO number definitions. */
+
+#define S3C64XX_GPA(_nr)	(S3C64XX_GPIO_A_START + (_nr))
+#define S3C64XX_GPB(_nr)	(S3C64XX_GPIO_B_START + (_nr))
+#define S3C64XX_GPC(_nr)	(S3C64XX_GPIO_C_START + (_nr))
+#define S3C64XX_GPD(_nr)	(S3C64XX_GPIO_D_START + (_nr))
+#define S3C64XX_GPE(_nr)	(S3C64XX_GPIO_E_START + (_nr))
+#define S3C64XX_GPF(_nr)	(S3C64XX_GPIO_F_START + (_nr))
+#define S3C64XX_GPG(_nr)	(S3C64XX_GPIO_G_START + (_nr))
+#define S3C64XX_GPH(_nr)	(S3C64XX_GPIO_H_START + (_nr))
+#define S3C64XX_GPI(_nr)	(S3C64XX_GPIO_I_START + (_nr))
+#define S3C64XX_GPJ(_nr)	(S3C64XX_GPIO_J_START + (_nr))
+#define S3C64XX_GPK(_nr)	(S3C64XX_GPIO_K_START + (_nr))
+#define S3C64XX_GPL(_nr)	(S3C64XX_GPIO_L_START + (_nr))
+#define S3C64XX_GPM(_nr)	(S3C64XX_GPIO_M_START + (_nr))
+#define S3C64XX_GPN(_nr)	(S3C64XX_GPIO_N_START + (_nr))
+#define S3C64XX_GPO(_nr)	(S3C64XX_GPIO_O_START + (_nr))
+#define S3C64XX_GPP(_nr)	(S3C64XX_GPIO_P_START + (_nr))
+#define S3C64XX_GPQ(_nr)	(S3C64XX_GPIO_Q_START + (_nr))
+
+/* the end of the S3C64XX specific gpios */
+#define S3C64XX_GPIO_END	(S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+#define S3C_GPIO_END		S3C64XX_GPIO_END
+
+/* define the number of gpios we need to the one after the GPQ() range */
+#define ARCH_NR_GPIOS	(S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s3c64xx/include/mach/hardware.h b/arch/arm/mach-s3c64xx/include/mach/hardware.h
new file mode 100644
index 0000000..862d033
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/hardware.h
@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/hardware.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - Hardware support
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
new file mode 100644
index 0000000..44bb3e4
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -0,0 +1,214 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/irqs.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - IRQ support
+ */
+
+#ifndef __ASM_MACH_S3C64XX_IRQS_H
+#define __ASM_MACH_S3C64XX_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S3C_IRQ_OFFSET	(32)
+
+#define S3C_IRQ(x)	((x) + S3C_IRQ_OFFSET)
+
+#define IRQ_VIC0_BASE	S3C_IRQ(0)
+#define IRQ_VIC1_BASE	S3C_IRQ(32)
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S3CUART_BASE0	(16)
+#define IRQ_S3CUART_BASE1	(20)
+#define IRQ_S3CUART_BASE2	(24)
+#define IRQ_S3CUART_BASE3	(28)
+
+#define UART_IRQ_RXD		(0)
+#define UART_IRQ_ERR		(1)
+#define UART_IRQ_TXD		(2)
+#define UART_IRQ_MODEM		(3)
+
+#define IRQ_S3CUART_RX0		(IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX0		(IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR0	(IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX1		(IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX1		(IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR1	(IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX2		(IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX2		(IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR2	(IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX3		(IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX3		(IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR3	(IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
+
+/* VIC based IRQs */
+
+#define S3C64XX_IRQ_VIC0(x)	(IRQ_VIC0_BASE + (x))
+#define S3C64XX_IRQ_VIC1(x)	(IRQ_VIC1_BASE + (x))
+
+/* VIC0 */
+
+#define IRQ_EINT0_3		S3C64XX_IRQ_VIC0(0)
+#define IRQ_EINT4_11		S3C64XX_IRQ_VIC0(1)
+#define IRQ_RTC_TIC		S3C64XX_IRQ_VIC0(2)
+#define IRQ_CAMIF_C		S3C64XX_IRQ_VIC0(3)
+#define IRQ_CAMIF_P		S3C64XX_IRQ_VIC0(4)
+#define IRQ_CAMIF_MC		S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIC1	S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIS		S3C64XX_IRQ_VIC0(6)
+#define IRQ_S3C6400_CAMIF_MP	S3C64XX_IRQ_VIC0(6)
+#define IRQ_CAMIF_WE_C		S3C64XX_IRQ_VIC0(7)
+#define IRQ_S3C6410_G3D		S3C64XX_IRQ_VIC0(8)
+#define IRQ_S3C6400_CAMIF_WE_P	S3C64XX_IRQ_VIC0(8)
+#define IRQ_POST0		S3C64XX_IRQ_VIC0(9)
+#define IRQ_ROTATOR		S3C64XX_IRQ_VIC0(10)
+#define IRQ_2D			S3C64XX_IRQ_VIC0(11)
+#define IRQ_TVENC		S3C64XX_IRQ_VIC0(12)
+#define IRQ_SCALER		S3C64XX_IRQ_VIC0(13)
+#define IRQ_BATF		S3C64XX_IRQ_VIC0(14)
+#define IRQ_JPEG		S3C64XX_IRQ_VIC0(15)
+#define IRQ_MFC			S3C64XX_IRQ_VIC0(16)
+#define IRQ_SDMA0		S3C64XX_IRQ_VIC0(17)
+#define IRQ_SDMA1		S3C64XX_IRQ_VIC0(18)
+#define IRQ_ARM_DMAERR		S3C64XX_IRQ_VIC0(19)
+#define IRQ_ARM_DMA		S3C64XX_IRQ_VIC0(20)
+#define IRQ_ARM_DMAS		S3C64XX_IRQ_VIC0(21)
+#define IRQ_KEYPAD		S3C64XX_IRQ_VIC0(22)
+#define IRQ_TIMER0_VIC		S3C64XX_IRQ_VIC0(23)
+#define IRQ_TIMER1_VIC		S3C64XX_IRQ_VIC0(24)
+#define IRQ_TIMER2_VIC		S3C64XX_IRQ_VIC0(25)
+#define IRQ_WDT			S3C64XX_IRQ_VIC0(26)
+#define IRQ_TIMER3_VIC		S3C64XX_IRQ_VIC0(27)
+#define IRQ_TIMER4_VIC		S3C64XX_IRQ_VIC0(28)
+#define IRQ_LCD_FIFO		S3C64XX_IRQ_VIC0(29)
+#define IRQ_LCD_VSYNC		S3C64XX_IRQ_VIC0(30)
+#define IRQ_LCD_SYSTEM		S3C64XX_IRQ_VIC0(31)
+
+/* VIC1 */
+
+#define IRQ_EINT12_19		S3C64XX_IRQ_VIC1(0)
+#define IRQ_EINT20_27		S3C64XX_IRQ_VIC1(1)
+#define IRQ_PCM0		S3C64XX_IRQ_VIC1(2)
+#define IRQ_PCM1		S3C64XX_IRQ_VIC1(3)
+#define IRQ_AC97		S3C64XX_IRQ_VIC1(4)
+#define IRQ_UART0		S3C64XX_IRQ_VIC1(5)
+#define IRQ_UART1		S3C64XX_IRQ_VIC1(6)
+#define IRQ_UART2		S3C64XX_IRQ_VIC1(7)
+#define IRQ_UART3		S3C64XX_IRQ_VIC1(8)
+#define IRQ_DMA0		S3C64XX_IRQ_VIC1(9)
+#define IRQ_DMA1		S3C64XX_IRQ_VIC1(10)
+#define IRQ_ONENAND0		S3C64XX_IRQ_VIC1(11)
+#define IRQ_ONENAND1		S3C64XX_IRQ_VIC1(12)
+#define IRQ_NFC			S3C64XX_IRQ_VIC1(13)
+#define IRQ_CFCON		S3C64XX_IRQ_VIC1(14)
+#define IRQ_USBH		S3C64XX_IRQ_VIC1(15)
+#define IRQ_SPI0		S3C64XX_IRQ_VIC1(16)
+#define IRQ_SPI1		S3C64XX_IRQ_VIC1(17)
+#define IRQ_IIC			S3C64XX_IRQ_VIC1(18)
+#define IRQ_HSItx		S3C64XX_IRQ_VIC1(19)
+#define IRQ_HSIrx		S3C64XX_IRQ_VIC1(20)
+#define IRQ_RESERVED		S3C64XX_IRQ_VIC1(21)
+#define IRQ_MSM			S3C64XX_IRQ_VIC1(22)
+#define IRQ_HOSTIF		S3C64XX_IRQ_VIC1(23)
+#define IRQ_HSMMC0		S3C64XX_IRQ_VIC1(24)
+#define IRQ_HSMMC1		S3C64XX_IRQ_VIC1(25)
+#define IRQ_HSMMC2		IRQ_SPI1	/* shared with SPI1 */
+#define IRQ_OTG			S3C64XX_IRQ_VIC1(26)
+#define IRQ_IRDA		S3C64XX_IRQ_VIC1(27)
+#define IRQ_RTC_ALARM		S3C64XX_IRQ_VIC1(28)
+#define IRQ_SEC			S3C64XX_IRQ_VIC1(29)
+#define IRQ_PENDN		S3C64XX_IRQ_VIC1(30)
+#define IRQ_TC			IRQ_PENDN
+#define IRQ_ADC			S3C64XX_IRQ_VIC1(31)
+
+#define S3C64XX_TIMER_IRQ(x)	S3C_IRQ(64 + (x))
+
+#define IRQ_TIMER0		S3C64XX_TIMER_IRQ(0)
+#define IRQ_TIMER1		S3C64XX_TIMER_IRQ(1)
+#define IRQ_TIMER2		S3C64XX_TIMER_IRQ(2)
+#define IRQ_TIMER3		S3C64XX_TIMER_IRQ(3)
+#define IRQ_TIMER4		S3C64XX_TIMER_IRQ(4)
+
+/* compatibility for device defines */
+
+#define IRQ_IIC1		IRQ_S3C6410_IIC1
+
+/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series
+ * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE
+ * which we place after the pair of VICs. */
+
+#define S3C_IRQ_EINT_BASE	S3C_IRQ(64+5)
+
+#define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
+#define IRQ_EINT(x)		S3C_EINT(x)
+#define IRQ_EINT_BIT(x)		((x) - S3C_EINT(0))
+
+/* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
+ * that they are sourced from the GPIO pins but with a different scheme for
+ * priority and source indication.
+ *
+ * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
+ * interrupts, but for historical reasons they are kept apart from these
+ * next interrupts.
+ *
+ * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
+ * machine specific support files.
+ */
+
+#define IRQ_EINT_GROUP1_NR	(15)
+#define IRQ_EINT_GROUP2_NR	(8)
+#define IRQ_EINT_GROUP3_NR	(5)
+#define IRQ_EINT_GROUP4_NR	(14)
+#define IRQ_EINT_GROUP5_NR	(7)
+#define IRQ_EINT_GROUP6_NR	(10)
+#define IRQ_EINT_GROUP7_NR	(16)
+#define IRQ_EINT_GROUP8_NR	(15)
+#define IRQ_EINT_GROUP9_NR	(9)
+
+#define IRQ_EINT_GROUP_BASE	S3C_EINT(28)
+#define IRQ_EINT_GROUP1_BASE	(IRQ_EINT_GROUP_BASE + 0x00)
+#define IRQ_EINT_GROUP2_BASE	(IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
+#define IRQ_EINT_GROUP3_BASE	(IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
+#define IRQ_EINT_GROUP4_BASE	(IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR)
+#define IRQ_EINT_GROUP5_BASE	(IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR)
+#define IRQ_EINT_GROUP6_BASE	(IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
+#define IRQ_EINT_GROUP7_BASE	(IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
+#define IRQ_EINT_GROUP8_BASE	(IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR)
+#define IRQ_EINT_GROUP9_BASE	(IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR)
+
+#define IRQ_EINT_GROUP(group, no)	(IRQ_EINT_GROUP##group##_BASE + (no))
+
+/* Define a group of interrupts for board-specific use (eg, for MFD
+ * interrupt controllers). */
+#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+#define IRQ_BOARD_NR 64
+#else
+#define IRQ_BOARD_NR 16
+#endif
+
+#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS	(IRQ_BOARD_END + 1)
+
+#endif /* __ASM_MACH_S3C64XX_IRQS_H */
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
new file mode 100644
index 0000000..801c1c0
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -0,0 +1,107 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/map.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+/*
+ * Post-mux Chip Select Regions Xm0CSn_
+ * These may be used by SROM, NAND or CF depending on settings
+ */
+
+#define S3C64XX_PA_XM0CSN0 (0x10000000)
+#define S3C64XX_PA_XM0CSN1 (0x18000000)
+#define S3C64XX_PA_XM0CSN2 (0x20000000)
+#define S3C64XX_PA_XM0CSN3 (0x28000000)
+#define S3C64XX_PA_XM0CSN4 (0x30000000)
+#define S3C64XX_PA_XM0CSN5 (0x38000000)
+
+/* HSMMC units */
+#define S3C64XX_PA_HSMMC(x)	(0x7C200000 + ((x) * 0x100000))
+#define S3C64XX_PA_HSMMC0	S3C64XX_PA_HSMMC(0)
+#define S3C64XX_PA_HSMMC1	S3C64XX_PA_HSMMC(1)
+#define S3C64XX_PA_HSMMC2	S3C64XX_PA_HSMMC(2)
+
+#define S3C_PA_UART		(0x7F005000)
+#define S3C_PA_UART0		(S3C_PA_UART + 0x00)
+#define S3C_PA_UART1		(S3C_PA_UART + 0x400)
+#define S3C_PA_UART2		(S3C_PA_UART + 0x800)
+#define S3C_PA_UART3		(S3C_PA_UART + 0xC00)
+#define S3C_UART_OFFSET		(0x400)
+
+/* See notes on UART VA mapping in debug-macro.S */
+#define S3C_VA_UARTx(x)	(S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET))
+
+#define S3C_VA_UART0		S3C_VA_UARTx(0)
+#define S3C_VA_UART1		S3C_VA_UARTx(1)
+#define S3C_VA_UART2		S3C_VA_UARTx(2)
+#define S3C_VA_UART3		S3C_VA_UARTx(3)
+
+#define S3C64XX_PA_SROM		(0x70000000)
+
+#define S3C64XX_PA_NAND		(0x70200000)
+#define S3C64XX_PA_FB		(0x77100000)
+#define S3C64XX_PA_USB_HSOTG	(0x7C000000)
+#define S3C64XX_PA_WATCHDOG	(0x7E004000)
+#define S3C64XX_PA_RTC		(0x7E005000)
+#define S3C64XX_PA_ADC		(0x7E00B000)
+#define S3C64XX_PA_SYSCON	(0x7E00F000)
+#define S3C64XX_PA_AC97		(0x7F001000)
+#define S3C64XX_PA_IIS0		(0x7F002000)
+#define S3C64XX_PA_IIS1		(0x7F003000)
+#define S3C64XX_PA_TIMER	(0x7F006000)
+#define S3C64XX_PA_IIC0		(0x7F004000)
+#define S3C64XX_PA_SPI0		(0x7F00B000)
+#define S3C64XX_PA_SPI1		(0x7F00C000)
+#define S3C64XX_PA_PCM0		(0x7F009000)
+#define S3C64XX_PA_PCM1		(0x7F00A000)
+#define S3C64XX_PA_IISV4	(0x7F00D000)
+#define S3C64XX_PA_IIC1		(0x7F00F000)
+
+#define S3C64XX_PA_GPIO		(0x7F008000)
+#define S3C64XX_VA_GPIO		S3C_ADDR_CPU(0x00000000)
+#define S3C64XX_SZ_GPIO		SZ_4K
+
+#define S3C64XX_PA_SDRAM	(0x50000000)
+#define S3C64XX_PA_VIC0		(0x71200000)
+#define S3C64XX_PA_VIC1		(0x71300000)
+
+#define S3C64XX_PA_MODEM	(0x74108000)
+#define S3C64XX_VA_MODEM	S3C_ADDR_CPU(0x00100000)
+
+#define S3C64XX_PA_USBHOST	(0x74300000)
+
+#define S3C64XX_PA_USB_HSPHY	(0x7C100000)
+#define S3C64XX_VA_USB_HSPHY	S3C_ADDR_CPU(0x00200000)
+
+/* place VICs close together */
+#define VA_VIC0			(S3C_VA_IRQ + 0x00)
+#define VA_VIC1			(S3C_VA_IRQ + 0x10000)
+
+/* compatibiltiy defines. */
+#define S3C_PA_TIMER		S3C64XX_PA_TIMER
+#define S3C_PA_HSMMC0		S3C64XX_PA_HSMMC0
+#define S3C_PA_HSMMC1		S3C64XX_PA_HSMMC1
+#define S3C_PA_HSMMC2		S3C64XX_PA_HSMMC2
+#define S3C_PA_IIC		S3C64XX_PA_IIC0
+#define S3C_PA_IIC1		S3C64XX_PA_IIC1
+#define S3C_PA_NAND		S3C64XX_PA_NAND
+#define S3C_PA_FB		S3C64XX_PA_FB
+#define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
+#define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
+#define S3C_VA_USB_HSPHY	S3C64XX_VA_USB_HSPHY
+
+#endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/memory.h b/arch/arm/mach-s3c64xx/include/mach/memory.h
new file mode 100644
index 0000000..a3ac84a
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/memory.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s3c6400/include/mach/memory.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET     UL(0x50000000)
+
+#endif
diff --git a/arch/arm/mach-s3c64xx/include/mach/pll.h b/arch/arm/mach-s3c64xx/include/mach/pll.h
new file mode 100644
index 0000000..90bbd72
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/pll.h
@@ -0,0 +1,74 @@
+/* arch/arm/plat-s3c64xx/include/plat/pll.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX PLL code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C6400_PLL_MDIV_MASK	((1 << (25-16+1)) - 1)
+#define S3C6400_PLL_PDIV_MASK	((1 << (13-8+1)) - 1)
+#define S3C6400_PLL_SDIV_MASK	((1 << (2-0+1)) - 1)
+#define S3C6400_PLL_MDIV_SHIFT	(16)
+#define S3C6400_PLL_PDIV_SHIFT	(8)
+#define S3C6400_PLL_SDIV_SHIFT	(0)
+
+#include <asm/div64.h>
+
+static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
+					    u32 pllcon)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK;
+	pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK;
+	sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+#define S3C6400_EPLL_MDIV_MASK	((1 << (23-16)) - 1)
+#define S3C6400_EPLL_PDIV_MASK	((1 << (13-8)) - 1)
+#define S3C6400_EPLL_SDIV_MASK	((1 << (2-0)) - 1)
+#define S3C6400_EPLL_MDIV_SHIFT	(16)
+#define S3C6400_EPLL_PDIV_SHIFT	(8)
+#define S3C6400_EPLL_SDIV_SHIFT	(0)
+#define S3C6400_EPLL_KDIV_MASK  (0xffff)
+
+static inline unsigned long s3c6400_get_epll(unsigned long baseclk)
+{
+	unsigned long result;
+	u32 epll0 = __raw_readl(S3C_EPLL_CON0);
+	u32 epll1 = __raw_readl(S3C_EPLL_CON1);
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (epll0 >> S3C6400_EPLL_MDIV_SHIFT) & S3C6400_EPLL_MDIV_MASK;
+	pdiv = (epll0 >> S3C6400_EPLL_PDIV_SHIFT) & S3C6400_EPLL_PDIV_MASK;
+	sdiv = (epll0 >> S3C6400_EPLL_SDIV_SHIFT) & S3C6400_EPLL_SDIV_MASK;
+	kdiv = epll1 & S3C6400_EPLL_KDIV_MASK;
+
+	/* We need to multiple baseclk by mdiv (the integer part) and kdiv
+	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
+	 * add kdiv before multiplying. The use of tmp is to avoid any
+	 * overflows before shifting bac down into result when multipling
+	 * by the mdiv and kdiv pair.
+	 */
+
+	tmp = baseclk;
+	tmp *= (mdiv << 16) + kdiv;
+	do_div(tmp, (pdiv << sdiv));
+	result = tmp >> 16;
+
+	return result;
+}
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
new file mode 100644
index 0000000..1e9f20f
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -0,0 +1,98 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/regs-gpio.h>
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+	u32 tmp = __raw_readl(S3C_PCLK_GATE);
+
+	/* As a note, since the S3C64XX UARTs generally have multiple
+	 * clock sources, we simply enable PCLK at the moment and hope
+	 * that the resume settings for the UART are suitable for the
+	 * use with PCLK.
+	 */
+
+	tmp |= S3C_CLKCON_PCLK_UART0;
+	tmp |= S3C_CLKCON_PCLK_UART1;
+	tmp |= S3C_CLKCON_PCLK_UART2;
+	tmp |= S3C_CLKCON_PCLK_UART3;
+
+	__raw_writel(tmp, S3C_PCLK_GATE);
+	udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+	/* VIC should have already been taken care of */
+
+	/* clear any pending EINT0 interrupts */
+	__raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+}
+
+/* make these defines, we currently do not have any need to change
+ * the IRQ wake controls depending on the CPU we are running on */
+
+#define s3c_irqwake_eintallow	((1 << 28) - 1)
+#define s3c_irqwake_intallow	(0)
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+					   struct pm_uart_save *save)
+{
+	u32 ucon = __raw_readl(regs + S3C2410_UCON);
+	u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+	u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
+	u32 new_ucon;
+	u32 delta;
+
+	/* S3C64XX UART blocks only support level interrupts, so ensure that
+	 * when we restore unused UART blocks we force the level interrupt
+	 * settigs. */
+	save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+	/* We have a constraint on changing the clock type of the UART
+	 * between UCLKx and PCLK, so ensure that when we restore UCON
+	 * that the CLK field is correctly modified if the bootloader
+	 * has changed anything.
+	 */
+	if (ucon_clk != save_clk) {
+		new_ucon = save->ucon;
+		delta = ucon_clk ^ save_clk;
+
+		/* change from UCLKx => wrong PCLK,
+		 * either UCLK can be tested for by a bit-test
+		 * with UCLK0 */
+		if (ucon_clk & S3C6400_UCON_UCLK0 &&
+		    !(save_clk & S3C6400_UCON_UCLK0) &&
+		    delta & S3C6400_UCON_PCLK2) {
+			new_ucon &= ~S3C6400_UCON_UCLK0;
+		} else if (delta == S3C6400_UCON_PCLK2) {
+			/* as an precaution, don't change from
+			 * PCLK2 => PCLK or vice-versa */
+			new_ucon ^= S3C6400_UCON_PCLK2;
+		}
+
+		S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+			  ucon, new_ucon, save->ucon);
+		save->ucon = new_ucon;
+	}
+}
diff --git a/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h b/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
new file mode 100644
index 0000000..b25bede
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
@@ -0,0 +1,56 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/pwm-clock.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64xx - pwm clock and timer support
+ */
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
new file mode 100644
index 0000000..3ef6274
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
@@ -0,0 +1,156 @@
+/* arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_CLOCK_H
+#define __PLAT_REGS_CLOCK_H __FILE__
+
+#define S3C_CLKREG(x)		(S3C_VA_SYS + (x))
+
+#define S3C_APLL_LOCK		S3C_CLKREG(0x00)
+#define S3C_MPLL_LOCK		S3C_CLKREG(0x04)
+#define S3C_EPLL_LOCK		S3C_CLKREG(0x08)
+#define S3C_APLL_CON		S3C_CLKREG(0x0C)
+#define S3C_MPLL_CON		S3C_CLKREG(0x10)
+#define S3C_EPLL_CON0		S3C_CLKREG(0x14)
+#define S3C_EPLL_CON1		S3C_CLKREG(0x18)
+#define S3C_CLK_SRC		S3C_CLKREG(0x1C)
+#define S3C_CLK_DIV0		S3C_CLKREG(0x20)
+#define S3C_CLK_DIV1		S3C_CLKREG(0x24)
+#define S3C_CLK_DIV2		S3C_CLKREG(0x28)
+#define S3C_CLK_OUT		S3C_CLKREG(0x2C)
+#define S3C_HCLK_GATE		S3C_CLKREG(0x30)
+#define S3C_PCLK_GATE		S3C_CLKREG(0x34)
+#define S3C_SCLK_GATE		S3C_CLKREG(0x38)
+#define S3C_MEM0_GATE		S3C_CLKREG(0x3C)
+
+/* CLKDIV0 */
+#define S3C6400_CLKDIV0_PCLK_MASK	(0xf << 12)
+#define S3C6400_CLKDIV0_PCLK_SHIFT	(12)
+#define S3C6400_CLKDIV0_HCLK2_MASK	(0x7 << 9)
+#define S3C6400_CLKDIV0_HCLK2_SHIFT	(9)
+#define S3C6400_CLKDIV0_HCLK_MASK	(0x1 << 8)
+#define S3C6400_CLKDIV0_HCLK_SHIFT	(8)
+#define S3C6400_CLKDIV0_MPLL_MASK	(0x1 << 4)
+#define S3C6400_CLKDIV0_MPLL_SHIFT	(4)
+
+#define S3C6400_CLKDIV0_ARM_MASK	(0x7 << 0)
+#define S3C6410_CLKDIV0_ARM_MASK	(0xf << 0)
+#define S3C6400_CLKDIV0_ARM_SHIFT	(0)
+
+/* HCLK GATE Registers */
+#define S3C_CLKCON_HCLK_3DSE	(1<<31)
+#define S3C_CLKCON_HCLK_UHOST	(1<<29)
+#define S3C_CLKCON_HCLK_SECUR	(1<<28)
+#define S3C_CLKCON_HCLK_SDMA1	(1<<27)
+#define S3C_CLKCON_HCLK_SDMA0	(1<<26)
+#define S3C_CLKCON_HCLK_IROM	(1<<25)
+#define S3C_CLKCON_HCLK_DDR1	(1<<24)
+#define S3C_CLKCON_HCLK_DDR0	(1<<23)
+#define S3C_CLKCON_HCLK_MEM1	(1<<22)
+#define S3C_CLKCON_HCLK_MEM0	(1<<21)
+#define S3C_CLKCON_HCLK_USB	(1<<20)
+#define S3C_CLKCON_HCLK_HSMMC2	(1<<19)
+#define S3C_CLKCON_HCLK_HSMMC1	(1<<18)
+#define S3C_CLKCON_HCLK_HSMMC0	(1<<17)
+#define S3C_CLKCON_HCLK_MDP	(1<<16)
+#define S3C_CLKCON_HCLK_DHOST	(1<<15)
+#define S3C_CLKCON_HCLK_IHOST	(1<<14)
+#define S3C_CLKCON_HCLK_DMA1	(1<<13)
+#define S3C_CLKCON_HCLK_DMA0	(1<<12)
+#define S3C_CLKCON_HCLK_JPEG	(1<<11)
+#define S3C_CLKCON_HCLK_CAMIF	(1<<10)
+#define S3C_CLKCON_HCLK_SCALER	(1<<9)
+#define S3C_CLKCON_HCLK_2D	(1<<8)
+#define S3C_CLKCON_HCLK_TV	(1<<7)
+#define S3C_CLKCON_HCLK_POST0	(1<<5)
+#define S3C_CLKCON_HCLK_ROT	(1<<4)
+#define S3C_CLKCON_HCLK_LCD	(1<<3)
+#define S3C_CLKCON_HCLK_TZIC	(1<<2)
+#define S3C_CLKCON_HCLK_INTC	(1<<1)
+#define S3C_CLKCON_HCLK_MFC	(1<<0)
+
+/* PCLK GATE Registers */
+#define S3C6410_CLKCON_PCLK_I2C1	(1<<27)
+#define S3C6410_CLKCON_PCLK_IIS2	(1<<26)
+#define S3C_CLKCON_PCLK_SKEY		(1<<24)
+#define S3C_CLKCON_PCLK_CHIPID		(1<<23)
+#define S3C_CLKCON_PCLK_SPI1		(1<<22)
+#define S3C_CLKCON_PCLK_SPI0		(1<<21)
+#define S3C_CLKCON_PCLK_HSIRX		(1<<20)
+#define S3C_CLKCON_PCLK_HSITX		(1<<19)
+#define S3C_CLKCON_PCLK_GPIO		(1<<18)
+#define S3C_CLKCON_PCLK_IIC		(1<<17)
+#define S3C_CLKCON_PCLK_IIS1		(1<<16)
+#define S3C_CLKCON_PCLK_IIS0		(1<<15)
+#define S3C_CLKCON_PCLK_AC97		(1<<14)
+#define S3C_CLKCON_PCLK_TZPC		(1<<13)
+#define S3C_CLKCON_PCLK_TSADC		(1<<12)
+#define S3C_CLKCON_PCLK_KEYPAD		(1<<11)
+#define S3C_CLKCON_PCLK_IRDA		(1<<10)
+#define S3C_CLKCON_PCLK_PCM1		(1<<9)
+#define S3C_CLKCON_PCLK_PCM0		(1<<8)
+#define S3C_CLKCON_PCLK_PWM		(1<<7)
+#define S3C_CLKCON_PCLK_RTC		(1<<6)
+#define S3C_CLKCON_PCLK_WDT		(1<<5)
+#define S3C_CLKCON_PCLK_UART3		(1<<4)
+#define S3C_CLKCON_PCLK_UART2		(1<<3)
+#define S3C_CLKCON_PCLK_UART1		(1<<2)
+#define S3C_CLKCON_PCLK_UART0		(1<<1)
+#define S3C_CLKCON_PCLK_MFC		(1<<0)
+
+/* SCLK GATE Registers */
+#define S3C_CLKCON_SCLK_UHOST		(1<<30)
+#define S3C_CLKCON_SCLK_MMC2_48		(1<<29)
+#define S3C_CLKCON_SCLK_MMC1_48		(1<<28)
+#define S3C_CLKCON_SCLK_MMC0_48		(1<<27)
+#define S3C_CLKCON_SCLK_MMC2		(1<<26)
+#define S3C_CLKCON_SCLK_MMC1		(1<<25)
+#define S3C_CLKCON_SCLK_MMC0		(1<<24)
+#define S3C_CLKCON_SCLK_SPI1_48 	(1<<23)
+#define S3C_CLKCON_SCLK_SPI0_48 	(1<<22)
+#define S3C_CLKCON_SCLK_SPI1		(1<<21)
+#define S3C_CLKCON_SCLK_SPI0		(1<<20)
+#define S3C_CLKCON_SCLK_DAC27		(1<<19)
+#define S3C_CLKCON_SCLK_TV27		(1<<18)
+#define S3C_CLKCON_SCLK_SCALER27	(1<<17)
+#define S3C_CLKCON_SCLK_SCALER		(1<<16)
+#define S3C_CLKCON_SCLK_LCD27		(1<<15)
+#define S3C_CLKCON_SCLK_LCD		(1<<14)
+#define S3C6400_CLKCON_SCLK_POST1_27	(1<<13)
+#define S3C6410_CLKCON_FIMC		(1<<13)
+#define S3C_CLKCON_SCLK_POST0_27	(1<<12)
+#define S3C6400_CLKCON_SCLK_POST1	(1<<11)
+#define S3C6410_CLKCON_SCLK_AUDIO2	(1<<11)
+#define S3C_CLKCON_SCLK_POST0		(1<<10)
+#define S3C_CLKCON_SCLK_AUDIO1		(1<<9)
+#define S3C_CLKCON_SCLK_AUDIO0		(1<<8)
+#define S3C_CLKCON_SCLK_SECUR		(1<<7)
+#define S3C_CLKCON_SCLK_IRDA		(1<<6)
+#define S3C_CLKCON_SCLK_UART		(1<<5)
+#define S3C_CLKCON_SCLK_ONENAND 	(1<<4)
+#define S3C_CLKCON_SCLK_MFC		(1<<3)
+#define S3C_CLKCON_SCLK_CAM		(1<<2)
+#define S3C_CLKCON_SCLK_JPEG		(1<<1)
+
+/* CLKSRC */
+
+#define S3C6400_CLKSRC_APLL_MOUT	(1 << 0)
+#define S3C6400_CLKSRC_MPLL_MOUT	(1 << 1)
+#define S3C6400_CLKSRC_EPLL_MOUT	(1 << 2)
+#define S3C6400_CLKSRC_APLL_MOUT_SHIFT	(0)
+#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT	(1)
+#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT	(2)
+#define S3C6400_CLKSRC_MFC		(1 << 4)
+
+#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-fb.h b/arch/arm/mach-s3c64xx/include/mach/regs-fb.h
new file mode 100644
index 0000000..f566115
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-fb.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2009 Samsung Electronics Co.
+ *
+ * Pawel Osciak <p.osciak@samsung.com>
+ * Based on plat-s3c/include/plat/regs-fb.h by Ben Dooks <ben@simtec.co.uk>
+ *
+ * Framebuffer register definitions for Samsung S3C64xx.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MACH_REGS_FB_H
+#define __ASM_ARCH_MACH_REGS_FB_H __FILE__
+
+#include <plat/regs-fb-v4.h>
+
+/* Palette registers */
+#define WIN2_PAL(_entry)			(0x300 + ((_entry) * 2))
+#define WIN3_PAL(_entry)			(0x320 + ((_entry) * 2))
+#define WIN4_PAL(_entry)			(0x340 + ((_entry) * 2))
+#define WIN0_PAL(_entry)			(0x400 + ((_entry) * 4))
+#define WIN1_PAL(_entry)			(0x800 + ((_entry) * 4))
+
+static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
+{
+	switch (window) {
+	case 0: return WIN0_PAL(reg);
+	case 1: return WIN1_PAL(reg);
+	case 2: return WIN2_PAL(reg);
+	case 3: return WIN3_PAL(reg);
+	case 4: return WIN4_PAL(reg);
+	}
+
+	BUG();
+}
+
+#endif /* __ASM_ARCH_MACH_REGS_FB_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h b/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h
new file mode 100644
index 0000000..82342f6
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio-memport.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIO memory port register definitions
+ */
+
+#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H
+#define __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__
+
+#define S3C64XX_MEM0CONSTOP	S3C64XX_GPIOREG(0x1B0)
+#define S3C64XX_MEM1CONSTOP	S3C64XX_GPIOREG(0x1B4)
+
+#define S3C64XX_MEM0CONSLP0	S3C64XX_GPIOREG(0x1C0)
+#define S3C64XX_MEM0CONSLP1	S3C64XX_GPIOREG(0x1C4)
+#define S3C64XX_MEM1CONSLP	S3C64XX_GPIOREG(0x1C8)
+
+#define S3C64XX_MEM0DRVCON	S3C64XX_GPIOREG(0x1D0)
+#define S3C64XX_MEM1DRVCON	S3C64XX_GPIOREG(0x1D4)
+
+#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H */
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h
new file mode 100644
index 0000000..81f7f6e
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h
@@ -0,0 +1,187 @@
+/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIO register definitions
+ */
+
+#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_H
+#define __ASM_PLAT_S3C64XX_REGS_GPIO_H __FILE__
+
+/* Base addresses for each of the banks */
+
+#define S3C64XX_GPIOREG(reg)	(S3C64XX_VA_GPIO + (reg))
+
+#define S3C64XX_GPA_BASE	S3C64XX_GPIOREG(0x0000)
+#define S3C64XX_GPB_BASE	S3C64XX_GPIOREG(0x0020)
+#define S3C64XX_GPC_BASE	S3C64XX_GPIOREG(0x0040)
+#define S3C64XX_GPD_BASE	S3C64XX_GPIOREG(0x0060)
+#define S3C64XX_GPE_BASE	S3C64XX_GPIOREG(0x0080)
+#define S3C64XX_GPF_BASE	S3C64XX_GPIOREG(0x00A0)
+#define S3C64XX_GPG_BASE	S3C64XX_GPIOREG(0x00C0)
+#define S3C64XX_GPH_BASE	S3C64XX_GPIOREG(0x00E0)
+#define S3C64XX_GPI_BASE	S3C64XX_GPIOREG(0x0100)
+#define S3C64XX_GPJ_BASE	S3C64XX_GPIOREG(0x0120)
+#define S3C64XX_GPK_BASE	S3C64XX_GPIOREG(0x0800)
+#define S3C64XX_GPL_BASE	S3C64XX_GPIOREG(0x0810)
+#define S3C64XX_GPM_BASE	S3C64XX_GPIOREG(0x0820)
+#define S3C64XX_GPN_BASE	S3C64XX_GPIOREG(0x0830)
+#define S3C64XX_GPO_BASE	S3C64XX_GPIOREG(0x0140)
+#define S3C64XX_GPP_BASE	S3C64XX_GPIOREG(0x0160)
+#define S3C64XX_GPQ_BASE	S3C64XX_GPIOREG(0x0180)
+
+/* SPCON */
+
+#define S3C64XX_SPCON		S3C64XX_GPIOREG(0x1A0)
+
+#define S3C64XX_SPCON_DRVCON_CAM_MASK		(0x3 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_SHIFT		(30)
+#define S3C64XX_SPCON_DRVCON_CAM_2mA		(0x0 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_4mA		(0x1 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_7mA		(0x2 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_9mA		(0x3 << 30)
+
+#define S3C64XX_SPCON_DRVCON_HSSPI_MASK		(0x3 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_SHIFT	(28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_2mA		(0x0 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_4mA		(0x1 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_7mA		(0x2 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_9mA		(0x3 << 28)
+
+#define S3C64XX_SPCON_DRVCON_HSMMC_MASK		(0x3 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_SHIFT	(26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_2mA		(0x0 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_4mA		(0x1 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_7mA		(0x2 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_9mA		(0x3 << 26)
+
+#define S3C64XX_SPCON_DRVCON_LCD_MASK		(0x3 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_SHIFT		(24)
+#define S3C64XX_SPCON_DRVCON_LCD_2mA		(0x0 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_4mA		(0x1 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_7mA		(0x2 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_9mA		(0x3 << 24)
+
+#define S3C64XX_SPCON_DRVCON_MODEM_MASK		(0x3 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_SHIFT	(22)
+#define S3C64XX_SPCON_DRVCON_MODEM_2mA		(0x0 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_4mA		(0x1 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_7mA		(0x2 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_9mA		(0x3 << 22)
+
+#define S3C64XX_SPCON_nRSTOUT_OEN		(1 << 21)
+
+#define S3C64XX_SPCON_DRVCON_SPICLK1_MASK	(0x3 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_SHIFT	(18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_2mA	(0x0 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_4mA	(0x1 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_7mA	(0x2 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_9mA	(0x3 << 18)
+
+#define S3C64XX_SPCON_MEM1_DQS_PUD_MASK		(0x3 << 16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_SHIFT	(16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_DISABLED	(0x0 << 16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_DOWN		(0x1 << 16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_UP		(0x2 << 16)
+
+#define S3C64XX_SPCON_MEM1_D_PUD1_MASK		(0x3 << 14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_SHIFT		(14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_DISABLED	(0x0 << 14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_DOWN		(0x1 << 14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_UP		(0x2 << 14)
+
+#define S3C64XX_SPCON_MEM1_D_PUD0_MASK		(0x3 << 12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_SHIFT		(12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_DISABLED	(0x0 << 12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_DOWN		(0x1 << 12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_UP		(0x2 << 12)
+
+#define S3C64XX_SPCON_MEM0_D_PUD_MASK		(0x3 << 8)
+#define S3C64XX_SPCON_MEM0_D_PUD_SHIFT		(8)
+#define S3C64XX_SPCON_MEM0_D_PUD_DISABLED	(0x0 << 8)
+#define S3C64XX_SPCON_MEM0_D_PUD_DOWN		(0x1 << 8)
+#define S3C64XX_SPCON_MEM0_D_PUD_UP		(0x2 << 8)
+
+#define S3C64XX_SPCON_USBH_DMPD			(1 << 7)
+#define S3C64XX_SPCON_USBH_DPPD			(1 << 6)
+#define S3C64XX_SPCON_USBH_PUSW2		(1 << 5)
+#define S3C64XX_SPCON_USBH_PUSW1		(1 << 4)
+#define S3C64XX_SPCON_USBH_SUSPND		(1 << 3)
+
+#define S3C64XX_SPCON_LCD_SEL_MASK		(0x3 << 0)
+#define S3C64XX_SPCON_LCD_SEL_SHIFT		(0)
+#define S3C64XX_SPCON_LCD_SEL_HOST		(0x0 << 0)
+#define S3C64XX_SPCON_LCD_SEL_RGB		(0x1 << 0)
+#define S3C64XX_SPCON_LCD_SEL_606_656		(0x2 << 0)
+
+
+/* External interrupt registers */
+
+#define S3C64XX_EINT12CON	S3C64XX_GPIOREG(0x200)
+#define S3C64XX_EINT34CON	S3C64XX_GPIOREG(0x204)
+#define S3C64XX_EINT56CON	S3C64XX_GPIOREG(0x208)
+#define S3C64XX_EINT78CON	S3C64XX_GPIOREG(0x20C)
+#define S3C64XX_EINT9CON	S3C64XX_GPIOREG(0x210)
+
+#define S3C64XX_EINT12FLTCON	S3C64XX_GPIOREG(0x220)
+#define S3C64XX_EINT34FLTCON	S3C64XX_GPIOREG(0x224)
+#define S3C64XX_EINT56FLTCON	S3C64XX_GPIOREG(0x228)
+#define S3C64XX_EINT78FLTCON	S3C64XX_GPIOREG(0x22C)
+#define S3C64XX_EINT9FLTCON	S3C64XX_GPIOREG(0x230)
+
+#define S3C64XX_EINT12MASK	S3C64XX_GPIOREG(0x240)
+#define S3C64XX_EINT34MASK	S3C64XX_GPIOREG(0x244)
+#define S3C64XX_EINT56MASK	S3C64XX_GPIOREG(0x248)
+#define S3C64XX_EINT78MASK	S3C64XX_GPIOREG(0x24C)
+#define S3C64XX_EINT9MASK	S3C64XX_GPIOREG(0x250)
+
+#define S3C64XX_EINT12PEND	S3C64XX_GPIOREG(0x260)
+#define S3C64XX_EINT34PEND	S3C64XX_GPIOREG(0x264)
+#define S3C64XX_EINT56PEND	S3C64XX_GPIOREG(0x268)
+#define S3C64XX_EINT78PEND	S3C64XX_GPIOREG(0x26C)
+#define S3C64XX_EINT9PEND	S3C64XX_GPIOREG(0x270)
+
+#define S3C64XX_PRIORITY	S3C64XX_GPIOREG(0x280)
+#define S3C64XX_PRIORITY_ARB(x)	(1 << (x))
+
+#define S3C64XX_SERVICE		S3C64XX_GPIOREG(0x284)
+#define S3C64XX_SERVICEPEND	S3C64XX_GPIOREG(0x288)
+
+#define S3C64XX_EINT0CON0	S3C64XX_GPIOREG(0x900)
+#define S3C64XX_EINT0CON1	S3C64XX_GPIOREG(0x904)
+#define S3C64XX_EINT0FLTCON0	S3C64XX_GPIOREG(0x910)
+#define S3C64XX_EINT0FLTCON1	S3C64XX_GPIOREG(0x914)
+#define S3C64XX_EINT0FLTCON2	S3C64XX_GPIOREG(0x918)
+#define S3C64XX_EINT0FLTCON3	S3C64XX_GPIOREG(0x91C)
+
+#define S3C64XX_EINT0MASK	S3C64XX_GPIOREG(0x920)
+#define S3C64XX_EINT0PEND	S3C64XX_GPIOREG(0x924)
+
+/* GPIO sleep configuration */
+
+#define S3C64XX_SPCONSLP	S3C64XX_GPIOREG(0x880)
+
+#define S3C64XX_SPCONSLP_TDO_PULLDOWN	(1 << 14)
+#define S3C64XX_SPCONSLP_CKE1INIT	(1 << 5)
+
+#define S3C64XX_SPCONSLP_RSTOUT_MASK	(0x3 << 12)
+#define S3C64XX_SPCONSLP_RSTOUT_OUT0	(0x0 << 12)
+#define S3C64XX_SPCONSLP_RSTOUT_OUT1	(0x1 << 12)
+#define S3C64XX_SPCONSLP_RSTOUT_HIZ	(0x2 << 12)
+
+#define S3C64XX_SPCONSLP_KPCOL_MASK	(0x3 << 0)
+#define S3C64XX_SPCONSLP_KPCOL_OUT0	(0x0 << 0)
+#define S3C64XX_SPCONSLP_KPCOL_OUT1	(0x1 << 0)
+#define S3C64XX_SPCONSLP_KPCOL_INP	(0x2 << 0)
+
+
+#define S3C64XX_SLPEN		S3C64XX_GPIOREG(0x930)
+
+#define S3C64XX_SLPEN_USE_xSLP		(1 << 0)
+#define S3C64XX_SLPEN_CFG_BYSLPEN	(1 << 1)
+
+#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_H */
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-irq.h b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
new file mode 100644
index 0000000..bcce68a
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
@@ -0,0 +1,20 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/regs-irq.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+
+#endif /* __ASM_ARCH_6400_REGS_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-modem.h b/arch/arm/mach-s3c64xx/include/mach/regs-modem.h
new file mode 100644
index 0000000..49f7759
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-modem.h
@@ -0,0 +1,31 @@
+/* arch/arm/plat-s3c64xx/include/plat/regs-modem.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - modem block registers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C64XX_REGS_MODEM_H
+#define __PLAT_S3C64XX_REGS_MODEM_H __FILE__
+
+#define S3C64XX_MODEMREG(x)	(S3C64XX_VA_MODEM + (x))
+
+#define S3C64XX_MODEM_INT2AP			S3C64XX_MODEMREG(0x0)
+#define S3C64XX_MODEM_INT2MODEM			S3C64XX_MODEMREG(0x4)
+#define S3C64XX_MODEM_MIFCON			S3C64XX_MODEMREG(0x8)
+#define S3C64XX_MODEM_MIFPCON			S3C64XX_MODEMREG(0xC)
+#define S3C64XX_MODEM_INTCLR			S3C64XX_MODEMREG(0x10)
+#define S3C64XX_MODEM_DMA_TXADDR		S3C64XX_MODEMREG(0x14)
+#define S3C64XX_MODEM_DMA_RXADDR		S3C64XX_MODEMREG(0x18)
+
+#define MIFPCON_INT2M_LEVEL			(1 << 4)
+#define MIFPCON_LCD_BYPASS			(1 << 3)
+
+#endif /* __PLAT_S3C64XX_REGS_MODEM_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-srom.h b/arch/arm/mach-s3c64xx/include/mach/regs-srom.h
new file mode 100644
index 0000000..756731b
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-srom.h
@@ -0,0 +1,59 @@
+/* arch/arm/plat-s3c64xx/include/plat/regs-srom.h
+ *
+ * Copyright 2009 Andy Green <andy@warmcat.com>
+ *
+ * S3C64XX SROM definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_SROM_H
+#define __PLAT_REGS_SROM_H __FILE__
+
+#define S3C64XX_SROMREG(x)	(S3C_VA_MEM + (x))
+
+#define S3C64XX_SROM_BW		S3C64XX_SROMREG(0)
+#define S3C64XX_SROM_BC0	S3C64XX_SROMREG(4)
+#define S3C64XX_SROM_BC1	S3C64XX_SROMREG(8)
+#define S3C64XX_SROM_BC2	S3C64XX_SROMREG(0xc)
+#define S3C64XX_SROM_BC3	S3C64XX_SROMREG(0x10)
+#define S3C64XX_SROM_BC4	S3C64XX_SROMREG(0x14)
+#define S3C64XX_SROM_BC5	S3C64XX_SROMREG(0x18)
+
+/*
+ * one register BW holds 5 x 4-bit packed settings for NCS0 - NCS4
+ */
+
+#define S3C64XX_SROM_BW__DATAWIDTH__SHIFT	0
+#define S3C64XX_SROM_BW__WAITENABLE__SHIFT	2
+#define S3C64XX_SROM_BW__BYTEENABLE__SHIFT	3
+#define S3C64XX_SROM_BW__CS_MASK 0xf
+
+#define S3C64XX_SROM_BW__NCS0__SHIFT	0
+#define S3C64XX_SROM_BW__NCS1__SHIFT	4
+#define S3C64XX_SROM_BW__NCS2__SHIFT	8
+#define S3C64XX_SROM_BW__NCS3__SHIFT	0xc
+#define S3C64XX_SROM_BW__NCS4__SHIFT	0x10
+
+/*
+ * applies to same to BCS0 - BCS4
+ */
+
+#define S3C64XX_SROM_BCX__PMC__SHIFT	0
+#define S3C64XX_SROM_BCX__PMC__MASK	3
+#define S3C64XX_SROM_BCX__TACP__SHIFT	4
+#define S3C64XX_SROM_BCX__TACP__MASK	0xf
+#define S3C64XX_SROM_BCX__TCAH__SHIFT	8
+#define S3C64XX_SROM_BCX__TCAH__MASK	0xf
+#define S3C64XX_SROM_BCX__TCOH__SHIFT	12
+#define S3C64XX_SROM_BCX__TCOH__MASK	0xf
+#define S3C64XX_SROM_BCX__TACC__SHIFT	16
+#define S3C64XX_SROM_BCX__TACC__MASK	0x1f
+#define S3C64XX_SROM_BCX__TCOS__SHIFT	24
+#define S3C64XX_SROM_BCX__TCOS__MASK	0xf
+#define S3C64XX_SROM_BCX__TACS__SHIFT	28
+#define S3C64XX_SROM_BCX__TACS__MASK	0xf
+
+#endif /* _PLAT_REGS_SROM_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
new file mode 100644
index 0000000..69b78d9
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
@@ -0,0 +1,28 @@
+/* arch/arm/plat-s3c64xx/include/plat/regs-sys.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX system register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_SYS_H
+#define __PLAT_REGS_SYS_H __FILE__
+
+#define S3C_SYSREG(x)		(S3C_VA_SYS + (x))
+
+#define S3C64XX_AHB_CON0	S3C_SYSREG(0x100)
+#define S3C64XX_AHB_CON1	S3C_SYSREG(0x104)
+#define S3C64XX_AHB_CON2	S3C_SYSREG(0x108)
+
+#define S3C64XX_OTHERS		S3C_SYSREG(0x900)
+
+#define S3C64XX_OTHERS_USBMASK	(1 << 16)
+
+#endif /* _PLAT_REGS_SYS_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h b/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h
new file mode 100644
index 0000000..270d96a
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h
@@ -0,0 +1,116 @@
+/* arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - syscon power and sleep control registers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C64XX_REGS_SYSCON_POWER_H
+#define __PLAT_S3C64XX_REGS_SYSCON_POWER_H __FILE__
+
+#define S3C64XX_PWR_CFG				S3C_SYSREG(0x804)
+
+#define S3C64XX_PWRCFG_OSC_OTG_DISABLE		(1 << 17)
+#define S3C64XX_PWRCFG_MMC2_DISABLE		(1 << 16)
+#define S3C64XX_PWRCFG_MMC1_DISABLE		(1 << 15)
+#define S3C64XX_PWRCFG_MMC0_DISABLE		(1 << 14)
+#define S3C64XX_PWRCFG_HSI_DISABLE		(1 << 13)
+#define S3C64XX_PWRCFG_TS_DISABLE		(1 << 12)
+#define S3C64XX_PWRCFG_RTC_TICK_DISABLE		(1 << 11)
+#define S3C64XX_PWRCFG_RTC_ALARM_DISABLE	(1 << 10)
+#define S3C64XX_PWRCFG_MSM_DISABLE		(1 << 9)
+#define S3C64XX_PWRCFG_KEY_DISABLE		(1 << 8)
+#define S3C64XX_PWRCFG_BATF_DISABLE		(1 << 7)
+
+#define S3C64XX_PWRCFG_CFG_WFI_MASK		(0x3 << 5)
+#define S3C64XX_PWRCFG_CFG_WFI_SHIFT		(5)
+#define S3C64XX_PWRCFG_CFG_WFI_IGNORE		(0x0 << 5)
+#define S3C64XX_PWRCFG_CFG_WFI_IDLE		(0x1 << 5)
+#define S3C64XX_PWRCFG_CFG_WFI_STOP		(0x2 << 5)
+#define S3C64XX_PWRCFG_CFG_WFI_SLEEP		(0x3 << 5)
+
+#define S3C64XX_PWRCFG_CFG_BATFLT_MASK		(0x3 << 3)
+#define S3C64XX_PWRCFG_CFG_BATFLT_SHIFT		(3)
+#define S3C64XX_PWRCFG_CFG_BATFLT_IGNORE	(0x0 << 3)
+#define S3C64XX_PWRCFG_CFG_BATFLT_IRQ		(0x1 << 3)
+#define S3C64XX_PWRCFG_CFG_BATFLT_SLEEP		(0x3 << 3)
+
+#define S3C64XX_PWRCFG_CFG_BAT_WAKE		(1 << 2)
+#define S3C64XX_PWRCFG_OSC27_EN			(1 << 0)
+
+#define S3C64XX_EINT_MASK			S3C_SYSREG(0x808)
+
+#define S3C64XX_NORMAL_CFG			S3C_SYSREG(0x810)
+
+#define S3C64XX_NORMALCFG_IROM_ON		(1 << 30)
+#define S3C64XX_NORMALCFG_DOMAIN_ETM_ON		(1 << 16)
+#define S3C64XX_NORMALCFG_DOMAIN_S_ON		(1 << 15)
+#define S3C64XX_NORMALCFG_DOMAIN_F_ON		(1 << 14)
+#define S3C64XX_NORMALCFG_DOMAIN_P_ON		(1 << 13)
+#define S3C64XX_NORMALCFG_DOMAIN_I_ON		(1 << 12)
+#define S3C64XX_NORMALCFG_DOMAIN_G_ON		(1 << 10)
+#define S3C64XX_NORMALCFG_DOMAIN_V_ON		(1 << 9)
+
+#define S3C64XX_STOP_CFG			S3C_SYSREG(0x814)
+
+#define S3C64XX_STOPCFG_MEMORY_ARM_ON		(1 << 29)
+#define S3C64XX_STOPCFG_TOP_MEMORY_ON		(1 << 20)
+#define S3C64XX_STOPCFG_ARM_LOGIC_ON		(1 << 17)
+#define S3C64XX_STOPCFG_TOP_LOGIC_ON		(1 << 8)
+#define S3C64XX_STOPCFG_OSC_EN			(1 << 0)
+
+#define S3C64XX_SLEEP_CFG			S3C_SYSREG(0x818)
+
+#define S3C64XX_SLEEPCFG_OSC_EN			(1 << 0)
+
+#define S3C64XX_STOP_MEM_CFG			S3C_SYSREG(0x81c)
+
+#define S3C64XX_STOPMEMCFG_MODEMIF_RETAIN	(1 << 6)
+#define S3C64XX_STOPMEMCFG_HOSTIF_RETAIN	(1 << 5)
+#define S3C64XX_STOPMEMCFG_OTG_RETAIN		(1 << 4)
+#define S3C64XX_STOPMEMCFG_HSMCC_RETAIN		(1 << 3)
+#define S3C64XX_STOPMEMCFG_IROM_RETAIN		(1 << 2)
+#define S3C64XX_STOPMEMCFG_IRDA_RETAIN		(1 << 1)
+#define S3C64XX_STOPMEMCFG_NFCON_RETAIN		(1 << 0)
+
+#define S3C64XX_OSC_STABLE			S3C_SYSREG(0x824)
+#define S3C64XX_PWR_STABLE			S3C_SYSREG(0x828)
+
+#define S3C64XX_WAKEUP_STAT			S3C_SYSREG(0x908)
+
+#define S3C64XX_WAKEUPSTAT_MMC2			(1 << 11)
+#define S3C64XX_WAKEUPSTAT_MMC1			(1 << 10)
+#define S3C64XX_WAKEUPSTAT_MMC0			(1 << 9)
+#define S3C64XX_WAKEUPSTAT_HSI			(1 << 8)
+#define S3C64XX_WAKEUPSTAT_BATFLT		(1 << 6)
+#define S3C64XX_WAKEUPSTAT_MSM			(1 << 5)
+#define S3C64XX_WAKEUPSTAT_KEY			(1 << 4)
+#define S3C64XX_WAKEUPSTAT_TS			(1 << 3)
+#define S3C64XX_WAKEUPSTAT_RTC_TICK		(1 << 2)
+#define S3C64XX_WAKEUPSTAT_RTC_ALARM		(1 << 1)
+#define S3C64XX_WAKEUPSTAT_EINT			(1 << 0)
+
+#define S3C64XX_BLK_PWR_STAT			S3C_SYSREG(0x90c)
+
+#define S3C64XX_BLKPWRSTAT_G			(1 << 7)
+#define S3C64XX_BLKPWRSTAT_ETM			(1 << 6)
+#define S3C64XX_BLKPWRSTAT_S			(1 << 5)
+#define S3C64XX_BLKPWRSTAT_F			(1 << 4)
+#define S3C64XX_BLKPWRSTAT_P			(1 << 3)
+#define S3C64XX_BLKPWRSTAT_I			(1 << 2)
+#define S3C64XX_BLKPWRSTAT_V			(1 << 1)
+#define S3C64XX_BLKPWRSTAT_TOP			(1 << 0)
+
+#define S3C64XX_INFORM0				S3C_SYSREG(0xA00)
+#define S3C64XX_INFORM1				S3C_SYSREG(0xA04)
+#define S3C64XX_INFORM2				S3C_SYSREG(0xA08)
+#define S3C64XX_INFORM3				S3C_SYSREG(0xA0C)
+
+#endif /* __PLAT_S3C64XX_REGS_SYSCON_POWER_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/s3c6400.h b/arch/arm/mach-s3c64xx/include/mach/s3c6400.h
new file mode 100644
index 0000000..f86958d
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/s3c6400.h
@@ -0,0 +1,36 @@
+/* arch/arm/mach-s3c64xx/include/macht/s3c6400.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Header file for s3c6400 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S3C6400 related SoCs */
+
+extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c6400_setup_clocks(void);
+
+extern void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
+
+#ifdef CONFIG_CPU_S3C6400
+
+extern  int s3c6400_init(void);
+extern void s3c6400_init_irq(void);
+extern void s3c6400_map_io(void);
+extern void s3c6400_init_clocks(int xtal);
+
+#define s3c6400_init_uarts s3c6400_common_init_uarts
+
+#else
+#define s3c6400_init_clocks NULL
+#define s3c6400_init_uarts NULL
+#define s3c6400_map_io NULL
+#define s3c6400_init NULL
+#endif
diff --git a/arch/arm/mach-s3c64xx/include/mach/s3c6410.h b/arch/arm/mach-s3c64xx/include/mach/s3c6410.h
new file mode 100644
index 0000000..24f1141
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/s3c6410.h
@@ -0,0 +1,29 @@
+/* arch/arm/mach-s3c64xx/include/mach/s3c6410.h
+ *
+ * Copyright 2008 Openmoko,  Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Header file for s3c6410 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C6410
+
+extern  int s3c6410_init(void);
+extern void s3c6410_init_irq(void);
+extern void s3c6410_map_io(void);
+extern void s3c6410_init_clocks(int xtal);
+
+#define s3c6410_init_uarts s3c6400_common_init_uarts
+
+#else
+#define s3c6410_init_clocks NULL
+#define s3c6410_init_uarts NULL
+#define s3c6410_map_io NULL
+#define s3c6410_init NULL
+#endif
diff --git a/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
new file mode 100644
index 0000000..9d0c43b
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
+ *
+ * Copyright (C) 2009 Samsung Electronics Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S3C64XX_PLAT_SPI_CLKS_H
+#define __S3C64XX_PLAT_SPI_CLKS_H __FILE__
+
+#define S3C64XX_SPI_SRCCLK_PCLK		0
+#define S3C64XX_SPI_SRCCLK_SPIBUS	1
+#define S3C64XX_SPI_SRCCLK_48M		2
+
+#endif /* __S3C64XX_PLAT_SPI_CLKS_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h
new file mode 100644
index 0000000..2e58cb7
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/system.h
@@ -0,0 +1,30 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/system.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - system implementation
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+#include <plat/watchdog-reset.h>
+
+static void arch_idle(void)
+{
+	/* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	if (mode != 's')
+		arch_wdt_reset();
+
+	/* if all else fails, or mode was for soft, jump to 0 */
+	cpu_reset(0);
+}
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/tick.h b/arch/arm/mach-s3c64xx/include/mach/tick.h
new file mode 100644
index 0000000..ebe18a9
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/tick.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/tick.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+/* note, the timer interrutps turn up in 2 places, the vic and then
+ * the timer block. We take the VIC as the base at the moment.
+ */
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+	return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0));
+}
+
+#define TICK_MAX	(0xffffffff)
+
+#endif /* __ASM_ARCH_6400_TICK_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/uncompress.h b/arch/arm/mach-s3c64xx/include/mach/uncompress.h
new file mode 100644
index 0000000..c6a82a2
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/uncompress.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s3c6400/include/mach/uncompress.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+	fifo_mask = S3C2440_UFSTAT_TXMASK;
+	fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s3c64xx/irq-eint.c b/arch/arm/mach-s3c64xx/irq-eint.c
new file mode 100644
index 0000000..5682d6a
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/irq-eint.c
@@ -0,0 +1,213 @@
+/* arch/arm/plat-s3c64xx/irq-eint.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling for IRQ_EINT(x)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <plat/regs-irqtype.h>
+#include <mach/regs-gpio.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/map.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#define eint_offset(irq)	((irq) - IRQ_EINT(0))
+#define eint_irq_to_bit(irq)	(1 << eint_offset(irq))
+
+static inline void s3c_irq_eint_mask(unsigned int irq)
+{
+	u32 mask;
+
+	mask = __raw_readl(S3C64XX_EINT0MASK);
+	mask |= eint_irq_to_bit(irq);
+	__raw_writel(mask, S3C64XX_EINT0MASK);
+}
+
+static void s3c_irq_eint_unmask(unsigned int irq)
+{
+	u32 mask;
+
+	mask = __raw_readl(S3C64XX_EINT0MASK);
+	mask &= ~eint_irq_to_bit(irq);
+	__raw_writel(mask, S3C64XX_EINT0MASK);
+}
+
+static inline void s3c_irq_eint_ack(unsigned int irq)
+{
+	__raw_writel(eint_irq_to_bit(irq), S3C64XX_EINT0PEND);
+}
+
+static void s3c_irq_eint_maskack(unsigned int irq)
+{
+	/* compiler should in-line these */
+	s3c_irq_eint_mask(irq);
+	s3c_irq_eint_ack(irq);
+}
+
+static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
+{
+	int offs = eint_offset(irq);
+	int pin, pin_val;
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+	void __iomem *reg;
+
+	if (offs > 27)
+		return -EINVAL;
+
+	if (offs <= 15)
+		reg = S3C64XX_EINT0CON0;
+	else
+		reg = S3C64XX_EINT0CON1;
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		printk(KERN_WARNING "No edge setting!\n");
+		break;
+
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S3C2410_EXTINT_RISEEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S3C2410_EXTINT_FALLEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S3C2410_EXTINT_BOTHEDGE;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S3C2410_EXTINT_LOWLEV;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S3C2410_EXTINT_HILEV;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -1;
+	}
+
+	if (offs <= 15)
+		shift = (offs / 2) * 4;
+	else
+		shift = ((offs - 16) / 2) * 4;
+	mask = 0x7 << shift;
+
+	ctrl = __raw_readl(reg);
+	ctrl &= ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, reg);
+
+	/* set the GPIO pin appropriately */
+
+	if (offs < 16) {
+		pin = S3C64XX_GPN(offs);
+		pin_val = S3C_GPIO_SFN(2);
+	} else if (offs < 23) {
+		pin = S3C64XX_GPL(offs + 8 - 16);
+		pin_val = S3C_GPIO_SFN(3);
+	} else {
+		pin = S3C64XX_GPM(offs - 23);
+		pin_val = S3C_GPIO_SFN(3);
+	}
+
+	s3c_gpio_cfgpin(pin, pin_val);
+
+	return 0;
+}
+
+static struct irq_chip s3c_irq_eint = {
+	.name		= "s3c-eint",
+	.mask		= s3c_irq_eint_mask,
+	.unmask		= s3c_irq_eint_unmask,
+	.mask_ack	= s3c_irq_eint_maskack,
+	.ack		= s3c_irq_eint_ack,
+	.set_type	= s3c_irq_eint_set_type,
+	.set_wake	= s3c_irqext_wake,
+};
+
+/* s3c_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into
+ * the specific handlers s3c_irq_demux_eintX_Y.
+ */
+static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
+{
+	u32 status = __raw_readl(S3C64XX_EINT0PEND);
+	u32 mask = __raw_readl(S3C64XX_EINT0MASK);
+	unsigned int irq;
+
+	status &= ~mask;
+	status >>= start;
+	status &= (1 << (end - start + 1)) - 1;
+
+	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+		if (status & 1)
+			generic_handle_irq(irq);
+
+		status >>= 1;
+	}
+}
+
+static void s3c_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(0, 3);
+}
+
+static void s3c_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(4, 11);
+}
+
+static void s3c_irq_demux_eint12_19(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(12, 19);
+}
+
+static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(20, 27);
+}
+
+static int __init s3c64xx_init_irq_eint(void)
+{
+	int irq;
+
+	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
+		set_irq_chip(irq, &s3c_irq_eint);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3);
+	set_irq_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11);
+	set_irq_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19);
+	set_irq_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27);
+
+	return 0;
+}
+
+arch_initcall(s3c64xx_init_irq_eint);
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
new file mode 100644
index 0000000..da1bec6
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -0,0 +1,111 @@
+/* arch/arm/plat-s3c64xx/irq-pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling Power Management
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+#include <plat/regs-timer.h>
+#include <mach/regs-gpio.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+/* We handled all the IRQ types in this code, to save having to make several
+ * small files to handle each different type separately. Having the EINT_GRP
+ * code here shouldn't be as much bloat as the IRQ table space needed when
+ * they are enabled. The added benefit is we ensure that these registers are
+ * in the same state as we suspended.
+ */
+
+static struct sleep_save irq_save[] = {
+	SAVE_ITEM(S3C64XX_PRIORITY),
+	SAVE_ITEM(S3C64XX_EINT0CON0),
+	SAVE_ITEM(S3C64XX_EINT0CON1),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON0),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON1),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON2),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON3),
+	SAVE_ITEM(S3C64XX_EINT0MASK),
+	SAVE_ITEM(S3C64XX_TINT_CSTAT),
+};
+
+static struct irq_grp_save {
+	u32	fltcon;
+	u32	con;
+	u32	mask;
+} eint_grp_save[5];
+
+static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static int s3c64xx_irq_pm_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: suspending IRQs\n", __func__);
+
+	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		grp->con = __raw_readl(S3C64XX_EINT12CON + (i * 4));
+		grp->mask = __raw_readl(S3C64XX_EINT12MASK + (i * 4));
+		grp->fltcon = __raw_readl(S3C64XX_EINT12FLTCON + (i * 4));
+	}
+
+	return 0;
+}
+
+static int s3c64xx_irq_pm_resume(struct sys_device *dev)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: resuming IRQs\n", __func__);
+
+	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		__raw_writel(grp->con, S3C64XX_EINT12CON + (i * 4));
+		__raw_writel(grp->mask, S3C64XX_EINT12MASK + (i * 4));
+		__raw_writel(grp->fltcon, S3C64XX_EINT12FLTCON + (i * 4));
+	}
+
+	S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
+	return 0;
+}
+
+static struct sysdev_driver s3c64xx_irq_driver = {
+	.suspend = s3c64xx_irq_pm_suspend,
+	.resume	 = s3c64xx_irq_pm_resume,
+};
+
+static int __init s3c64xx_irq_pm_init(void)
+{
+	return sysdev_driver_register(&s3c64xx_sysclass, &s3c64xx_irq_driver);
+}
+
+arch_initcall(s3c64xx_irq_pm_init);
+
diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c
new file mode 100644
index 0000000..67a145d
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/irq.c
@@ -0,0 +1,69 @@
+/* arch/arm/plat-s3c64xx/irq.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/irq-uart.h>
+#include <plat/cpu.h>
+
+static struct s3c_uart_irq uart_irqs[] = {
+	[0] = {
+		.regs		= S3C_VA_UART0,
+		.base_irq	= IRQ_S3CUART_BASE0,
+		.parent_irq	= IRQ_UART0,
+	},
+	[1] = {
+		.regs		= S3C_VA_UART1,
+		.base_irq	= IRQ_S3CUART_BASE1,
+		.parent_irq	= IRQ_UART1,
+	},
+	[2] = {
+		.regs		= S3C_VA_UART2,
+		.base_irq	= IRQ_S3CUART_BASE2,
+		.parent_irq	= IRQ_UART2,
+	},
+	[3] = {
+		.regs		= S3C_VA_UART3,
+		.base_irq	= IRQ_S3CUART_BASE3,
+		.parent_irq	= IRQ_UART3,
+	},
+};
+
+
+void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
+{
+	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+	/* initialise the pair of VICs */
+	vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, 0);
+	vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, 0);
+
+	/* add the timer sub-irqs */
+
+	s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
+	s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
+	s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2);
+	s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3);
+	s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4);
+
+	s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
+}
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
new file mode 100644
index 0000000..4a0bb24
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -0,0 +1,245 @@
+/* linux/arch/arm/mach-s3c64xx/mach-anw6410.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ * Copyright 2009 Kwangwoo Lee
+ * 	Kwangwoo Lee <kwangwoo.lee@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/dm9000.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <mach/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-modem.h>
+
+/* DM9000 */
+#define ANW6410_PA_DM9000	(0x18000000)
+
+/* A hardware buffer to control external devices is mapped at 0x30000000.
+ * It can not be read. So current status must be kept in anw6410_extdev_status.
+ */
+#define ANW6410_VA_EXTDEV	S3C_ADDR(0x02000000)
+#define ANW6410_PA_EXTDEV	(0x30000000)
+
+#define ANW6410_EN_DM9000	(1<<11)
+#define ANW6410_EN_LCD		(1<<14)
+
+static __u32 anw6410_extdev_status;
+
+static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+/* framebuffer and LCD setup. */
+static void __init anw6410_lcd_mode_set(void)
+{
+	u32 tmp;
+
+	/* set the LCD type */
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the LCD bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/* GPF1 = LCD panel power
+ * GPF4 = LCD backlight control
+ */
+static void anw6410_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power) {
+		anw6410_extdev_status |= (ANW6410_EN_LCD << 16);
+		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+		gpio_direction_output(S3C64XX_GPF(1), 1);
+		gpio_direction_output(S3C64XX_GPF(4), 1);
+	} else {
+		anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16);
+		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+		gpio_direction_output(S3C64XX_GPF(1), 0);
+		gpio_direction_output(S3C64XX_GPF(4), 0);
+	}
+}
+
+static struct plat_lcd_data anw6410_lcd_power_data = {
+	.set_power	= anw6410_lcd_power_set,
+};
+
+static struct platform_device anw6410_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &anw6410_lcd_power_data,
+};
+
+static struct s3c_fb_pd_win anw6410_fb_win0 = {
+	/* this is to ensure we use win0 */
+	.win_mode	= {
+		.pixclock	= 41094,
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &anw6410_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+static void __init anw6410_dm9000_enable(void)
+{
+	anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16);
+	__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+}
+
+static struct resource anw6410_dm9000_resource[] = {
+	[0] = {
+		.start = ANW6410_PA_DM9000,
+		.end   = ANW6410_PA_DM9000 + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = ANW6410_PA_DM9000 + 4,
+		.end   = ANW6410_PA_DM9000 + 4 + 500,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = IRQ_EINT(15),
+		.end   = IRQ_EINT(15),
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+	},
+};
+
+static struct dm9000_plat_data anw6410_dm9000_pdata = {
+	.flags	  = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+	/* dev_addr can be set to provide hwaddr. */
+};
+
+static struct platform_device anw6410_device_eth = {
+	.name	= "dm9000",
+	.id	= -1,
+	.num_resources	= ARRAY_SIZE(anw6410_dm9000_resource),
+	.resource	= anw6410_dm9000_resource,
+	.dev	= {
+		.platform_data  = &anw6410_dm9000_pdata,
+	},
+};
+
+static struct map_desc anw6410_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)ANW6410_VA_EXTDEV,
+		.pfn		= __phys_to_pfn(ANW6410_PA_EXTDEV),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct platform_device *anw6410_devices[] __initdata = {
+	&s3c_device_fb,
+	&anw6410_lcd_powerdev,
+	&anw6410_device_eth,
+};
+
+static void __init anw6410_map_io(void)
+{
+	s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
+
+	anw6410_lcd_mode_set();
+}
+
+static void __init anw6410_machine_init(void)
+{
+	s3c_fb_set_platdata(&anw6410_lcd_pdata);
+
+	gpio_request(S3C64XX_GPF(1), "panel power");
+	gpio_request(S3C64XX_GPF(4), "LCD backlight");
+
+	anw6410_dm9000_enable();
+
+	platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices));
+}
+
+MACHINE_START(ANW6410, "A&W6410")
+	/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= anw6410_map_io,
+	.init_machine	= anw6410_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
new file mode 100644
index 0000000..a6d91c3
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -0,0 +1,276 @@
+/* mach-hmt.c - Platform code for Airgoo HMT
+ *
+ * Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/pwm_backlight.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+#include <plat/nand.h>
+
+#include <mach/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+static int hmt_bl_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable");
+	if (!ret)
+		ret = gpio_direction_output(S3C64XX_GPB(4), 0);
+
+	return ret;
+}
+
+static int hmt_bl_notify(int brightness)
+{
+	/*
+	 * translate from CIELUV/CIELAB L*->brightness, E.G. from
+	 * perceived luminance to light output. Assumes range 0..25600
+	 */
+	if (brightness < 0x800) {
+		/* Y = Yn * L / 903.3 */
+		brightness = (100*256 * brightness + 231245/2) / 231245;
+	} else {
+		/* Y = Yn * ((L + 16) / 116 )^3 */
+		int t = (brightness*4 + 16*1024 + 58)/116;
+		brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000);
+	}
+
+	gpio_set_value(S3C64XX_GPB(4), brightness);
+
+	return brightness;
+}
+
+static void hmt_bl_exit(struct device *dev)
+{
+	gpio_free(S3C64XX_GPB(4));
+}
+
+static struct platform_pwm_backlight_data hmt_backlight_data = {
+	.pwm_id		= 1,
+	.max_brightness	= 100 * 256,
+	.dft_brightness	= 40 * 256,
+	.pwm_period_ns	= 1000000000 / (100 * 256 * 20),
+	.init		= hmt_bl_init,
+	.notify		= hmt_bl_notify,
+	.exit		= hmt_bl_exit,
+
+};
+
+static struct platform_device hmt_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent	= &s3c_device_timer[1].dev,
+		.platform_data = &hmt_backlight_data,
+	},
+};
+
+static struct s3c_fb_pd_win hmt_fb_win0 = {
+	.win_mode	= {
+		.pixclock	= 41094,
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata hmt_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &hmt_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct mtd_partition hmt_nand_part[] = {
+	[0] = {
+		.name	= "uboot",
+		.size	= SZ_512K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "uboot-env1",
+		.size	= SZ_256K,
+		.offset	= SZ_512K,
+	},
+	[2] = {
+		.name	= "uboot-env2",
+		.size	= SZ_256K,
+		.offset	= SZ_512K + SZ_256K,
+	},
+	[3] = {
+		.name	= "kernel",
+		.size	= SZ_2M,
+		.offset	= SZ_1M,
+	},
+	[4] = {
+		.name	= "rootfs",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= SZ_1M + SZ_2M,
+	},
+};
+
+static struct s3c2410_nand_set hmt_nand_sets[] = {
+	[0] = {
+		.name		= "nand",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(hmt_nand_part),
+		.partitions	= hmt_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand hmt_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 55,
+	.twrph1		= 40,
+	.nr_sets	= ARRAY_SIZE(hmt_nand_sets),
+	.sets		= hmt_nand_sets,
+};
+
+static struct gpio_led hmt_leds[] = {
+	{ /* left function keys */
+		.name			= "left:blue",
+		.gpio			= S3C64XX_GPO(12),
+		.default_trigger	= "default-on",
+	},
+	{ /* right function keys - red */
+		.name			= "right:red",
+		.gpio			= S3C64XX_GPO(13),
+	},
+	{ /* right function keys - green */
+		.name			= "right:green",
+		.gpio			= S3C64XX_GPO(14),
+	},
+	{ /* right function keys - blue */
+		.name			= "right:blue",
+		.gpio			= S3C64XX_GPO(15),
+		.default_trigger	= "default-on",
+	},
+};
+
+static struct gpio_led_platform_data hmt_led_data = {
+	.num_leds = ARRAY_SIZE(hmt_leds),
+	.leds = hmt_leds,
+};
+
+static struct platform_device hmt_leds_device = {
+	.name			= "leds-gpio",
+	.id			= -1,
+	.dev.platform_data	= &hmt_led_data,
+};
+
+static struct map_desc hmt_iodesc[] = {};
+
+static struct platform_device *hmt_devices[] __initdata = {
+	&s3c_device_i2c0,
+	&s3c_device_nand,
+	&s3c_device_fb,
+	&s3c_device_ohci,
+	&s3c_device_timer[1],
+	&hmt_backlight_device,
+	&hmt_leds_device,
+};
+
+static void __init hmt_map_io(void)
+{
+	s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
+}
+
+static void __init hmt_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	s3c_fb_set_platdata(&hmt_lcd_pdata);
+	s3c_nand_set_platdata(&hmt_nand_info);
+
+	gpio_request(S3C64XX_GPC(7), "usb power");
+	gpio_direction_output(S3C64XX_GPC(7), 0);
+	gpio_request(S3C64XX_GPM(0), "usb power");
+	gpio_direction_output(S3C64XX_GPM(0), 1);
+	gpio_request(S3C64XX_GPK(7), "usb power");
+	gpio_direction_output(S3C64XX_GPK(7), 1);
+	gpio_request(S3C64XX_GPF(13), "usb power");
+	gpio_direction_output(S3C64XX_GPF(13), 1);
+
+	platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
+}
+
+MACHINE_START(HMT, "Airgoo-HMT")
+	/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= hmt_map_io,
+	.init_machine	= hmt_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
new file mode 100644
index 0000000..bf65747
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -0,0 +1,107 @@
+/*
+ * linux/arch/arm/mach-s3c64xx/mach-ncp.c
+ *
+ * Copyright (C) 2008-2009 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <mach/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = {
+	/* REVISIT: NCP uses only serial 1, 2 */
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+static struct platform_device *ncp_devices[] __initdata = {
+	&s3c_device_hsmmc1,
+	&s3c_device_i2c0,
+};
+
+static struct map_desc ncp_iodesc[] __initdata = {};
+
+static void __init ncp_map_io(void)
+{
+	s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
+}
+
+static void __init ncp_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+
+	platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices));
+}
+
+MACHINE_START(NCP, "NCP")
+	/* Maintainer: Samsung Electronics */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= ncp_map_io,
+	.init_machine	= ncp_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
new file mode 100644
index 0000000..f7b1898
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -0,0 +1,96 @@
+/* linux/arch/arm/mach-s3c64xx/mach-smdk6400.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <mach/s3c6400.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk6400_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+static struct map_desc smdk6400_iodesc[] = {};
+
+static void __init smdk6400_map_io(void)
+{
+	s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
+}
+
+static struct platform_device *smdk6400_devices[] __initdata = {
+	&s3c_device_hsmmc1,
+	&s3c_device_i2c0,
+};
+
+static struct i2c_board_info i2c_devs[] __initdata = {
+	{ I2C_BOARD_INFO("wm8753", 0x1A), },
+	{ I2C_BOARD_INFO("24c08", 0x50), },
+};
+
+static void __init smdk6400_machine_init(void)
+{
+	i2c_register_board_info(0, i2c_devs, ARRAY_SIZE(i2c_devs));
+	platform_add_devices(smdk6400_devices, ARRAY_SIZE(smdk6400_devices));
+}
+
+MACHINE_START(SMDK6400, "SMDK6400")
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+
+	.init_irq	= s3c6400_init_irq,
+	.map_io		= smdk6400_map_io,
+	.init_machine	= smdk6400_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
new file mode 100644
index 0000000..fdf8f75
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -0,0 +1,491 @@
+/* linux/arch/arm/mach-s3c64xx/mach-smdk6410.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/pmic.h>
+#endif
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-modem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-srom.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[3] = {
+		.hwport	     = 3,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+/* framebuffer and LCD setup. */
+
+/* GPF15 = LCD backlight control
+ * GPF13 => Panel power
+ * GPN5 = LCD nRESET signal
+ * PWM_TOUT1 => backlight brightness
+ */
+
+static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power) {
+		gpio_direction_output(S3C64XX_GPF(13), 1);
+		gpio_direction_output(S3C64XX_GPF(15), 1);
+
+		/* fire nRESET on power up */
+		gpio_direction_output(S3C64XX_GPN(5), 0);
+		msleep(10);
+		gpio_direction_output(S3C64XX_GPN(5), 1);
+		msleep(1);
+	} else {
+		gpio_direction_output(S3C64XX_GPF(15), 0);
+		gpio_direction_output(S3C64XX_GPF(13), 0);
+	}
+}
+
+static struct plat_lcd_data smdk6410_lcd_power_data = {
+	.set_power	= smdk6410_lcd_power_set,
+};
+
+static struct platform_device smdk6410_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smdk6410_lcd_power_data,
+};
+
+static struct s3c_fb_pd_win smdk6410_fb_win0 = {
+	/* this is to ensure we use win0 */
+	.win_mode	= {
+		.pixclock	= 41094,
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &smdk6410_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/*
+ * Configuring Ethernet on SMDK6410
+ *
+ * Both CS8900A and LAN9115 chips share one chip select mediated by CFG6.
+ * The constant address below corresponds to nCS1
+ *
+ *  1) Set CFGB2 p3 ON others off, no other CFGB selects "ethernet"
+ *  2) CFG6 needs to be switched to "LAN9115" side
+ */
+
+static struct resource smdk6410_smsc911x_resources[] = {
+	[0] = {
+		.start = S3C64XX_PA_XM0CSN1,
+		.end   = S3C64XX_PA_XM0CSN1 + SZ_64K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = S3C_EINT(10),
+		.end   = S3C_EINT(10),
+		.flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW,
+	},
+};
+
+static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
+	.irq_polarity  = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type      = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags         = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+
+static struct platform_device smdk6410_smsc911x = {
+	.name          = "smsc911x",
+	.id            = -1,
+	.num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
+	.resource      = &smdk6410_smsc911x_resources[0],
+	.dev = {
+		.platform_data = &smdk6410_smsc911x_pdata,
+	},
+};
+
+#ifdef CONFIG_REGULATOR
+static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
+	{
+		/* WM8580 */
+		.supply = "PVDD",
+		.dev_name = "0-001b",
+	},
+	{
+		/* WM8580 */
+		.supply = "AVDD",
+		.dev_name = "0-001b",
+	},
+};
+
+static struct regulator_init_data smdk6410_b_pwr_5v_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
+	.consumer_supplies = smdk6410_b_pwr_5v_consumers,
+};
+
+static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
+	.supply_name = "B_PWR_5V",
+	.microvolts = 5000000,
+	.init_data = &smdk6410_b_pwr_5v_data,
+	.gpio = -EINVAL,
+};
+
+static struct platform_device smdk6410_b_pwr_5v = {
+	.name          = "reg-fixed-voltage",
+	.id            = -1,
+	.dev = {
+		.platform_data = &smdk6410_b_pwr_5v_pdata,
+	},
+};
+#endif
+
+static struct map_desc smdk6410_iodesc[] = {};
+
+static struct platform_device *smdk6410_devices[] __initdata = {
+#ifdef CONFIG_SMDK6410_SD_CH0
+	&s3c_device_hsmmc0,
+#endif
+#ifdef CONFIG_SMDK6410_SD_CH1
+	&s3c_device_hsmmc1,
+#endif
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_fb,
+	&s3c_device_ohci,
+	&s3c_device_usb_hsotg,
+
+#ifdef CONFIG_REGULATOR
+	&smdk6410_b_pwr_5v,
+#endif
+	&smdk6410_lcd_powerdev,
+
+	&smdk6410_smsc911x,
+};
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+/* S3C64xx internal logic & PLL */
+static struct regulator_init_data wm8350_dcdc1_data = {
+	.constraints = {
+		.name = "PVDD_INT/PVDD_PLL",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.always_on = 1,
+		.apply_uV = 1,
+	},
+};
+
+/* Memory */
+static struct regulator_init_data wm8350_dcdc3_data = {
+	.constraints = {
+		.name = "PVDD_MEM",
+		.min_uV = 1800000,
+		.max_uV = 1800000,
+		.always_on = 1,
+		.state_mem = {
+			 .uV = 1800000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.initial_state = PM_SUSPEND_MEM,
+	},
+};
+
+/* USB, EXT, PCM, ADC/DAC, USB, MMC */
+static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
+	{
+		/* WM8580 */
+		.supply = "DVDD",
+		.dev_name = "0-001b",
+	},
+};
+
+static struct regulator_init_data wm8350_dcdc4_data = {
+	.constraints = {
+		.name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
+		.min_uV = 3000000,
+		.max_uV = 3000000,
+		.always_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
+	.consumer_supplies = wm8350_dcdc4_consumers,
+};
+
+/* ARM core */
+static struct regulator_consumer_supply dcdc6_consumers[] = {
+	{
+		.supply = "vddarm",
+	}
+};
+
+static struct regulator_init_data wm8350_dcdc6_data = {
+	.constraints = {
+		.name = "PVDD_ARM",
+		.min_uV = 1000000,
+		.max_uV = 1300000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(dcdc6_consumers),
+	.consumer_supplies = dcdc6_consumers,
+};
+
+/* Alive */
+static struct regulator_init_data wm8350_ldo1_data = {
+	.constraints = {
+		.name = "PVDD_ALIVE",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.always_on = 1,
+		.apply_uV = 1,
+	},
+};
+
+/* OTG */
+static struct regulator_init_data wm8350_ldo2_data = {
+	.constraints = {
+		.name = "PVDD_OTG",
+		.min_uV = 3300000,
+		.max_uV = 3300000,
+		.always_on = 1,
+	},
+};
+
+/* LCD */
+static struct regulator_init_data wm8350_ldo3_data = {
+	.constraints = {
+		.name = "PVDD_LCD",
+		.min_uV = 3000000,
+		.max_uV = 3000000,
+		.always_on = 1,
+	},
+};
+
+/* OTGi/1190-EV1 HPVDD & AVDD */
+static struct regulator_init_data wm8350_ldo4_data = {
+	.constraints = {
+		.name = "PVDD_OTGI/HPVDD/AVDD",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.apply_uV = 1,
+		.always_on = 1,
+	},
+};
+
+static struct {
+	int regulator;
+	struct regulator_init_data *initdata;
+} wm1190_regulators[] = {
+	{ WM8350_DCDC_1, &wm8350_dcdc1_data },
+	{ WM8350_DCDC_3, &wm8350_dcdc3_data },
+	{ WM8350_DCDC_4, &wm8350_dcdc4_data },
+	{ WM8350_DCDC_6, &wm8350_dcdc6_data },
+	{ WM8350_LDO_1, &wm8350_ldo1_data },
+	{ WM8350_LDO_2, &wm8350_ldo2_data },
+	{ WM8350_LDO_3, &wm8350_ldo3_data },
+	{ WM8350_LDO_4, &wm8350_ldo4_data },
+};
+
+static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
+{
+	int i;
+
+	/* Configure the IRQ line */
+	s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
+
+	/* Instantiate the regulators */
+	for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
+		wm8350_register_regulator(wm8350,
+					  wm1190_regulators[i].regulator,
+					  wm1190_regulators[i].initdata);
+
+	return 0;
+}
+
+static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
+	.init = smdk6410_wm8350_init,
+	.irq_high = 1,
+	.irq_base = IRQ_BOARD_START,
+};
+#endif
+
+static struct i2c_board_info i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("24c08", 0x50), },
+	{ I2C_BOARD_INFO("wm8580", 0x1b), },
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+	{ I2C_BOARD_INFO("wm8350", 0x1a),
+	  .platform_data = &smdk6410_wm8350_pdata,
+	  .irq = S3C_EINT(12),
+	},
+#endif
+};
+
+static struct i2c_board_info i2c_devs1[] __initdata = {
+	{ I2C_BOARD_INFO("24c128", 0x57), },	/* Samsung S524AD0XD1 */
+};
+
+static void __init smdk6410_map_io(void)
+{
+	u32 tmp;
+
+	s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
+
+	/* set the LCD type */
+
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the lcd bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+static void __init smdk6410_machine_init(void)
+{
+	u32 cs1;
+
+	s3c_i2c0_set_platdata(NULL);
+	s3c_i2c1_set_platdata(NULL);
+	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+
+	/* configure nCS1 width to 16 bits */
+
+	cs1 = __raw_readl(S3C64XX_SROM_BW) &
+		    ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
+	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
+		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
+		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
+						   S3C64XX_SROM_BW__NCS1__SHIFT;
+	__raw_writel(cs1, S3C64XX_SROM_BW);
+
+	/* set timing for nCS1 suitable for ethernet chip */
+
+	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
+		     (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+		     (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+		     (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+		     (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
+		     (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+		     (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+
+	gpio_request(S3C64XX_GPN(5), "LCD power");
+	gpio_request(S3C64XX_GPF(13), "LCD power");
+	gpio_request(S3C64XX_GPF(15), "LCD power");
+
+	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
+}
+
+MACHINE_START(SMDK6410, "SMDK6410")
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= smdk6410_map_io,
+	.init_machine	= smdk6410_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
new file mode 100644
index 0000000..b8ac459
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -0,0 +1,173 @@
+/* linux/arch/arm/plat-s3c64xx/pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU PM support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/pm.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-syscon-power.h>
+#include <mach/regs-gpio-memport.h>
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+#include <mach/gpio-bank-n.h>
+
+void s3c_pm_debug_smdkled(u32 set, u32 clear)
+{
+	unsigned long flags;
+	u32 reg;
+
+	local_irq_save(flags);
+	reg = __raw_readl(S3C64XX_GPNCON);
+	reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) |
+		 S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15));
+	reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) |
+	       S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15);
+	__raw_writel(reg, S3C64XX_GPNCON);
+
+	reg = __raw_readl(S3C64XX_GPNDAT);
+	reg &= ~(clear << 12);
+	reg |= set << 12;
+	__raw_writel(reg, S3C64XX_GPNDAT);
+
+	local_irq_restore(flags);
+}
+#endif
+
+static struct sleep_save core_save[] = {
+	SAVE_ITEM(S3C_APLL_LOCK),
+	SAVE_ITEM(S3C_MPLL_LOCK),
+	SAVE_ITEM(S3C_EPLL_LOCK),
+	SAVE_ITEM(S3C_CLK_SRC),
+	SAVE_ITEM(S3C_CLK_DIV0),
+	SAVE_ITEM(S3C_CLK_DIV1),
+	SAVE_ITEM(S3C_CLK_DIV2),
+	SAVE_ITEM(S3C_CLK_OUT),
+	SAVE_ITEM(S3C_HCLK_GATE),
+	SAVE_ITEM(S3C_PCLK_GATE),
+	SAVE_ITEM(S3C_SCLK_GATE),
+	SAVE_ITEM(S3C_MEM0_GATE),
+
+	SAVE_ITEM(S3C_EPLL_CON1),
+	SAVE_ITEM(S3C_EPLL_CON0),
+
+	SAVE_ITEM(S3C64XX_MEM0DRVCON),
+	SAVE_ITEM(S3C64XX_MEM1DRVCON),
+
+#ifndef CONFIG_CPU_FREQ
+	SAVE_ITEM(S3C_APLL_CON),
+	SAVE_ITEM(S3C_MPLL_CON),
+#endif
+};
+
+static struct sleep_save misc_save[] = {
+	SAVE_ITEM(S3C64XX_AHB_CON0),
+	SAVE_ITEM(S3C64XX_AHB_CON1),
+	SAVE_ITEM(S3C64XX_AHB_CON2),
+	
+	SAVE_ITEM(S3C64XX_SPCON),
+
+	SAVE_ITEM(S3C64XX_MEM0CONSTOP),
+	SAVE_ITEM(S3C64XX_MEM1CONSTOP),
+	SAVE_ITEM(S3C64XX_MEM0CONSLP0),
+	SAVE_ITEM(S3C64XX_MEM0CONSLP1),
+	SAVE_ITEM(S3C64XX_MEM1CONSLP),
+};
+
+void s3c_pm_configure_extint(void)
+{
+	__raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
+}
+
+void s3c_pm_restore_core(void)
+{
+	__raw_writel(0, S3C64XX_EINT_MASK);
+
+	s3c_pm_debug_smdkled(1 << 2, 0);
+
+	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
+}
+
+void s3c_pm_save_core(void)
+{
+	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
+	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
+}
+
+/* since both s3c6400 and s3c6410 share the same sleep pm calls, we
+ * put the per-cpu code in here until any new cpu comes along and changes
+ * this.
+ */
+
+static void s3c64xx_cpu_suspend(void)
+{
+	unsigned long tmp;
+
+	/* set our standby method to sleep */
+
+	tmp = __raw_readl(S3C64XX_PWR_CFG);
+	tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
+	tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
+	__raw_writel(tmp, S3C64XX_PWR_CFG);
+
+	/* clear any old wakeup */
+
+	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
+		     S3C64XX_WAKEUP_STAT);
+
+	/* set the LED state to 0110 over sleep */
+	s3c_pm_debug_smdkled(3 << 1, 0xf);
+
+	/* issue the standby signal into the pm unit. Note, we
+	 * issue a write-buffer drain just in case */
+
+	tmp = 0;
+
+	asm("b 1f\n\t"
+	    ".align 5\n\t"
+	    "1:\n\t"
+	    "mcr p15, 0, %0, c7, c10, 5\n\t"
+	    "mcr p15, 0, %0, c7, c10, 4\n\t"
+	    "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
+
+	/* we should never get past here */
+
+	panic("sleep resumed to originator?");
+}
+
+static void s3c64xx_pm_prepare(void)
+{
+	/* store address of resume. */
+	__raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0);
+
+	/* ensure previous wakeup state is cleared before sleeping */
+	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
+}
+
+static int s3c64xx_pm_init(void)
+{
+	pm_cpu_prep = s3c64xx_pm_prepare;
+	pm_cpu_sleep = s3c64xx_cpu_suspend;
+	pm_uart_udivslot = 1;
+	return 0;
+}
+
+arch_initcall(s3c64xx_pm_init);
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
new file mode 100644
index 0000000..707e34e
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -0,0 +1,89 @@
+/* linux/arch/arm/mach-s3c64xx/cpu.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <mach/s3c6400.h>
+
+void __init s3c6400_map_io(void)
+{
+	/* setup SDHCI */
+
+	s3c6400_default_sdhci0();
+	s3c6400_default_sdhci1();
+	s3c6400_default_sdhci2();
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+
+	s3c_device_nand.name = "s3c6400-nand";
+}
+
+void __init s3c6400_init_clocks(int xtal)
+{
+	s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK);
+	s3c6400_setup_clocks();
+}
+
+void __init s3c6400_init_irq(void)
+{
+	/* VIC0 does not have IRQS 5..7,
+	 * VIC1 is fully populated. */
+	s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
+}
+
+struct sysdev_class s3c6400_sysclass = {
+	.name	= "s3c6400-core",
+};
+
+static struct sys_device s3c6400_sysdev = {
+	.cls	= &s3c6400_sysclass,
+};
+
+static int __init s3c6400_core_init(void)
+{
+	return sysdev_class_register(&s3c6400_sysclass);
+}
+
+core_initcall(s3c6400_core_init);
+
+int __init s3c6400_init(void)
+{
+	printk("S3C6400: Initialising architecture\n");
+
+	return sysdev_register(&s3c6400_sysdev);
+}
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
new file mode 100644
index 0000000..59635d1
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -0,0 +1,91 @@
+/* linux/arch/arm/mach-s3c64xx/s3c6410.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <mach/s3c6400.h>
+#include <mach/s3c6410.h>
+
+void __init s3c6410_map_io(void)
+{
+	/* initialise device information early */
+	s3c6410_default_sdhci0();
+	s3c6410_default_sdhci1();
+	s3c6410_default_sdhci2();
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
+
+	s3c_device_nand.name = "s3c6400-nand";
+}
+
+void __init s3c6410_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+	s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK);
+	s3c6400_setup_clocks();
+}
+
+void __init s3c6410_init_irq(void)
+{
+	/* VIC0 is missing IRQ7, VIC1 is fully populated. */
+	s3c64xx_init_irq(~0 & ~(1 << 7), ~0);
+}
+
+struct sysdev_class s3c6410_sysclass = {
+	.name	= "s3c6410-core",
+};
+
+static struct sys_device s3c6410_sysdev = {
+	.cls	= &s3c6410_sysclass,
+};
+
+static int __init s3c6410_core_init(void)
+{
+	return sysdev_class_register(&s3c6410_sysclass);
+}
+
+core_initcall(s3c6410_core_init);
+
+int __init s3c6410_init(void)
+{
+	printk("S3C6410: Initialising architecture\n");
+
+	return sysdev_register(&s3c6410_sysdev);
+}
diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
new file mode 100644
index 0000000..8e28e44
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-s3c64xx/setup-fb-24bpp.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX setup information for 24bpp LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+
+#include <mach/regs-fb.h>
+#include <mach/gpio.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+extern void s3c64xx_fb_gpio_setup_24bpp(void)
+{
+	unsigned int gpio;
+
+	for (gpio = S3C64XX_GPI(0); gpio <= S3C64XX_GPI(15); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S3C64XX_GPJ(0); gpio <= S3C64XX_GPJ(11); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}
diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c
new file mode 100644
index 0000000..d1b11e6
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-i2c0.c
@@ -0,0 +1,31 @@
+/* linux/arch/arm/plat-s3c64xx/setup-i2c0.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX I2C bus 0 gpio configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <mach/gpio-bank-b.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S3C64XX_GPB(5), S3C64XX_GPB5_I2C_SCL0);
+	s3c_gpio_cfgpin(S3C64XX_GPB(6), S3C64XX_GPB6_I2C_SDA0);
+	s3c_gpio_setpull(S3C64XX_GPB(5), S3C_GPIO_PULL_UP);
+	s3c_gpio_setpull(S3C64XX_GPB(6), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c
new file mode 100644
index 0000000..2dce57d
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-i2c1.c
@@ -0,0 +1,31 @@
+/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX I2C bus 1 gpio configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <mach/gpio-bank-b.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S3C64XX_GPB(2), S3C64XX_GPB2_I2C_SCL1);
+	s3c_gpio_cfgpin(S3C64XX_GPB(3), S3C64XX_GPB3_I2C_SDA1);
+	s3c_gpio_setpull(S3C64XX_GPB(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_setpull(S3C64XX_GPB(3), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
new file mode 100644
index 0000000..a58c0cc
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
@@ -0,0 +1,75 @@
+/* linux/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/gpio.h>
+#include <plat/gpio-cfg.h>
+
+void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPG(2 + width);
+
+	/* Set all the necessary GPG pins to special-function 0 */
+	for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+}
+
+void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPH(2 + width);
+
+	/* Set all the necessary GPG pins to special-function 0 */
+	for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+}
+
+void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPH(6 + width);
+
+	/* Set all the necessary GPH pins to special-function 1 */
+	for (gpio = S3C64XX_GPH(6); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	/* Set all the necessary GPC pins to special-function 1 */
+	for (gpio = S3C64XX_GPC(4); gpio < S3C64XX_GPC(6); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}
diff --git a/arch/arm/mach-s3c64xx/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c
new file mode 100644
index 0000000..1a94203
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-sdhci.c
@@ -0,0 +1,72 @@
+/* linux/arch/arm/mach-s3c64xx/setup-sdhci.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C6400/S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s3c64xx_hsmmc_clksrcs[4] = {
+	[0] = "hsmmc",
+	[1] = "hsmmc",
+	[2] = "mmc_bus",
+	/* [3] = "48m", - note not successfully used yet */
+};
+
+void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
+				  void __iomem *r,
+				  struct mmc_ios *ios,
+				  struct mmc_card *card)
+{
+	u32 ctrl2, ctrl3;
+
+	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+	if (ios->clock < 25 * 1000000)
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+			 S3C_SDHCI_CTRL3_FCSEL2 |
+			 S3C_SDHCI_CTRL3_FCSEL1 |
+			 S3C_SDHCI_CTRL3_FCSEL0);
+	else
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+	printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
+	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
+
+void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
+				  void __iomem *r,
+				  struct mmc_ios *ios,
+				  struct mmc_card *card)
+{
+	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+	s3c6400_setup_sdhci_cfg_card(dev, r, ios, card);
+}
diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S
new file mode 100644
index 0000000..b2ef443
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/sleep.S
@@ -0,0 +1,144 @@
+/* linux/arch/arm/plat-s3c64xx/sleep.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU sleep code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/map.h>
+
+#undef S3C64XX_VA_GPIO
+#define S3C64XX_VA_GPIO (0x0)
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-bank-n.h>
+
+#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
+
+	.text
+
+	/* s3c_cpu_save
+	 *
+	 * Save enough processor state to allow the restart of the pm.c
+	 * code after resume.
+	 *
+	 * entry:
+	 *	r0 = pointer to the save block
+	*/
+
+ENTRY(s3c_cpu_save)
+	stmfd	sp!, { r4 - r12, lr }
+
+	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
+	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
+	mrc	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
+	mrc	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
+	mrc	p15, 0, r8, c2, c0, 2	@ Translation Table Control
+	mrc	p15, 0, r9, c1, c0, 0	@ Control register
+	mrc	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
+	mrc	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
+
+	stmia	r0, { r4 - r13 }	@ Save CP registers and SP
+
+	@@ save our state to ram
+	bl	s3c_pm_cb_flushcache
+
+	@@ call final suspend code
+	ldr	r0, =pm_cpu_sleep
+	ldr	pc, [r0]
+	
+	@@ return to the caller, after the MMU is turned on.
+	@@ restore the last bits of the stack and return.
+resume_with_mmu:
+	ldmfd	sp!, { r4 - r12, pc }	@ return, from sp from s3c_cpu_save
+
+	.data
+
+	/* the next bit is code, but it requires easy access to the
+	 * s3c_sleep_save_phys data before the MMU is switched on, so
+	 * we store the code that needs this variable in the .data where
+	 * the value can be written to (the .text segment is RO).
+	*/
+
+	.global	s3c_sleep_save_phys
+s3c_sleep_save_phys:
+	.word	0
+
+	/* Sleep magic, the word before the resume entry point so that the
+	 * bootloader can check for a resumeable image. */
+
+	.word	0x2bedf00d
+
+	/* s3c_cpu_reusme
+	 *
+	 * This is the entry point, stored by whatever method the bootloader
+	 * requires to get the kernel runnign again. This code expects to be
+	 * entered with no caches live and the MMU disabled. It will then
+	 * restore the MMU and other basic CP registers saved and restart
+	 * the kernel C code to finish the resume code.
+	*/
+
+ENTRY(s3c_cpu_resume)
+	msr	cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+	ldr	r2, =LL_UART		/* for debug */
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+	/* Initialise the GPIO state if we are debugging via the SMDK LEDs,
+	 * as the uboot version supplied resets these to inputs during the
+	 * resume checks.
+	*/
+
+	ldr	r3, =S3C64XX_PA_GPIO
+	ldr	r0, [ r3, #S3C64XX_GPNCON ]
+	bic	r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \
+			  S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15))
+	orr	r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \
+			  S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15))
+	str	r0, [ r3, #S3C64XX_GPNCON ]
+
+	ldr	r0, [ r3, #S3C64XX_GPNDAT ]
+	bic	r0, r0, #0xf << 12			@ GPN12..15
+	orr	r0, r0, #1 << 15			@ GPN15
+	str	r0, [ r3, #S3C64XX_GPNDAT ]
+#endif
+
+	/* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches
+	 * are thoroughly cleaned just in case the bootloader didn't do it
+	 * for us. */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c14, 0		@ clean+invalidate D cache
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, r0, c7, c15, 0		@ clean+invalidate cache
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	@@mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
+	@@mcr	p15, 0, r0, c7, c7, 0		@ Invalidate I + D caches
+
+	ldr	r0, s3c_sleep_save_phys
+	ldmia	r0, { r4 - r13 }
+
+	mcr	p15, 0, r4, c13, c0, 0	@ FCSE/PID
+	mcr	p15, 0, r5, c3, c0, 0	@ Domain ID
+	mcr	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
+	mcr	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
+	mcr	p15, 0, r8, c2, c0, 2	@ Translation Table Control
+	mcr	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
+
+	mov	r0, #0			@ restore copro access controls
+	mcr	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
+	mcr 	p15, 0, r0, c7, c5, 4
+
+	ldr	r2, =resume_with_mmu
+	mcr	p15, 0, r9, c1, c0, 0		/* turn mmu back on */
+	nop
+	mov	pc, r2				/* jump back */
+
+	.end