Merge branch 'samsung/cleanup' into next/boards

Conflicts:
	arch/arm/mach-imx/mach-imx6q.c
	arch/arm/mach-omap2/board-ti8168evm.c
	arch/arm/mach-s3c64xx/Kconfig
	arch/arm/mach-tegra/Makefile
	arch/arm/mach-tegra/board-dt-tegra20.c
	arch/arm/mach-tegra/common.c

Lots of relatively simple conflicts between the board
changes and stuff from the arm tree. This pulls in
the resolution from the samsung/cleanup tree, so we
don't get conflicting merges.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

25 files changed, 515 insertions, 575 deletions

diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 4d8c489..e9dae91 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -77,6 +77,11 @@ config S3C64XX_SETUP_SDHCI_GPIO
 	help
 	  Common setup code for S3C64XX SDHCI GPIO configurations
 
+config S3C64XX_SETUP_SPI
+	bool
+	help
+	 Common setup code for SPI GPIO configurations
+
 # S36400 Macchine support
 
 config MACH_SMDK6400
@@ -276,6 +281,7 @@ config MACH_WLF_CRAGG_6410
 	select S3C64XX_SETUP_IDE
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_KEYPAD
+	select S3C64XX_SETUP_SPI
 	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_KEYPAD
 	select S3C_DEV_USB_HOST
@@ -286,7 +292,7 @@ config MACH_WLF_CRAGG_6410
 	select S3C_DEV_I2C1
 	select S3C_DEV_WDT
 	select S3C_DEV_RTC
-	select S3C64XX_DEV_SPI
+	select S3C64XX_DEV_SPI0
 	select SAMSUNG_GPIO_EXTRA128
 	select I2C
 	help
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index cfc0b99..1822ac2 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -10,54 +10,49 @@ obj-m				:=
 obj-n				:=
 obj-				:=
 
-# Core files
-obj-y				+= cpu.o
-obj-y				+= clock.o
+# Core
 
-# Core support for S3C6400 system
+obj-y				+= common.o clock.o
+
+# Core support
 
 obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
 obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
 
-obj-y				+= irq.o
-obj-y				+= irq-eint.o
+# PM
+
+obj-$(CONFIG_PM)		+= pm.o irq-pm.o sleep.o
 
 # DMA support
 
 obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
 
-# Device setup
+# Device support
 
-obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o
-obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
-obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-y				+= dev-uart.o
+obj-y				+= dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
 
-# PM
+# Device setup
 
-obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= sleep.o
-obj-$(CONFIG_PM)		+= irq-pm.o
+obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C0)	+= setup-i2c0.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C1)	+= setup-i2c1.o
+obj-$(CONFIG_S3C64XX_SETUP_IDE)		+= setup-ide.o
+obj-$(CONFIG_S3C64XX_SETUP_KEYPAD)	+= setup-keypad.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
+obj-$(CONFIG_S3C64XX_SETUP_SPI)		+= setup-spi.o
 
 # Machine support
 
-obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
-obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o
-obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
-obj-$(CONFIG_MACH_REAL6410)     += mach-real6410.o
-obj-$(CONFIG_MACH_MINI6410)     += mach-mini6410.o
-obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
-obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
-obj-$(CONFIG_MACH_SMARTQ)	+= mach-smartq.o
-obj-$(CONFIG_MACH_SMARTQ5)	+= mach-smartq5.o
-obj-$(CONFIG_MACH_SMARTQ7)	+= mach-smartq7.o
-obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
-
-# device support
-
-obj-y				+= dev-uart.o
-obj-y				+= dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
+obj-$(CONFIG_MACH_ANW6410)		+= mach-anw6410.o
+obj-$(CONFIG_MACH_HMT)			+= mach-hmt.o
+obj-$(CONFIG_MACH_MINI6410)		+= mach-mini6410.o
+obj-$(CONFIG_MACH_NCP)			+= mach-ncp.o
+obj-$(CONFIG_MACH_REAL6410)		+= mach-real6410.o
+obj-$(CONFIG_MACH_SMARTQ)		+= mach-smartq.o
+obj-$(CONFIG_MACH_SMARTQ5)		+= mach-smartq5.o
+obj-$(CONFIG_MACH_SMARTQ7)		+= mach-smartq7.o
+obj-$(CONFIG_MACH_SMDK6400)		+= mach-smdk6400.o
+obj-$(CONFIG_MACH_SMDK6410)		+= mach-smdk6410.o
+obj-$(CONFIG_MACH_WLF_CRAGG_6410)	+= mach-crag6410.o mach-crag6410-module.o
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 39c238d..31bb27d 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -184,18 +184,6 @@ static struct clk init_clocks_off[] = {
 		.enable		= s3c64xx_pclk_ctrl,
 		.ctrlbit	= S3C_CLKCON_PCLK_SPI1,
 	}, {
-		.name		= "spi_48m",
-		.devname	= "s3c64xx-spi.0",
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_SPI0_48,
-	}, {
-		.name		= "spi_48m",
-		.devname	= "s3c64xx-spi.1",
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_SPI1_48,
-	}, {
 		.name		= "48m",
 		.devname	= "s3c-sdhci.0",
 		.parent		= &clk_48m,
@@ -226,6 +214,22 @@ static struct clk init_clocks_off[] = {
 	},
 };
 
+static struct clk clk_48m_spi0 = {
+	.name		= "spi_48m",
+	.devname	= "s3c64xx-spi.0",
+	.parent		= &clk_48m,
+	.enable		= s3c64xx_sclk_ctrl,
+	.ctrlbit	= S3C_CLKCON_SCLK_SPI0_48,
+};
+
+static struct clk clk_48m_spi1 = {
+	.name		= "spi_48m",
+	.devname	= "s3c64xx-spi.1",
+	.parent		= &clk_48m,
+	.enable		= s3c64xx_sclk_ctrl,
+	.ctrlbit	= S3C_CLKCON_SCLK_SPI1_48,
+};
+
 static struct clk init_clocks[] = {
 	{
 		.name		= "lcd",
@@ -243,24 +247,6 @@ static struct clk init_clocks[] = {
 		.enable		= s3c64xx_hclk_ctrl,
 		.ctrlbit	= S3C_CLKCON_HCLK_UHOST,
 	}, {
-		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.0",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC0,
-	}, {
-		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.1",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC1,
-	}, {
-		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.2",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC2,
-	}, {
 		.name		= "otg",
 		.parent		= &clk_h,
 		.enable		= s3c64xx_hclk_ctrl,
@@ -310,6 +296,29 @@ static struct clk init_clocks[] = {
 	}
 };
 
+static struct clk clk_hsmmc0 = {
+	.name		= "hsmmc",
+	.devname	= "s3c-sdhci.0",
+	.parent		= &clk_h,
+	.enable		= s3c64xx_hclk_ctrl,
+	.ctrlbit	= S3C_CLKCON_HCLK_HSMMC0,
+};
+
+static struct clk clk_hsmmc1 = {
+	.name		= "hsmmc",
+	.devname	= "s3c-sdhci.1",
+	.parent		= &clk_h,
+	.enable		= s3c64xx_hclk_ctrl,
+	.ctrlbit	= S3C_CLKCON_HCLK_HSMMC1,
+};
+
+static struct clk clk_hsmmc2 = {
+	.name		= "hsmmc",
+	.devname	= "s3c-sdhci.2",
+	.parent		= &clk_h,
+	.enable		= s3c64xx_hclk_ctrl,
+	.ctrlbit	= S3C_CLKCON_HCLK_HSMMC2,
+};
 
 static struct clk clk_fout_apll = {
 	.name		= "fout_apll",
@@ -578,36 +587,6 @@ static struct clksrc_sources clkset_camif = {
 static struct clksrc_clk clksrcs[] = {
 	{
 		.clk	= {
-			.name		= "mmc_bus",
-			.devname	= "s3c-sdhci.0",
-			.ctrlbit        = S3C_CLKCON_SCLK_MMC0,
-			.enable		= s3c64xx_sclk_ctrl,
-		},
-		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 18, .size = 2  },
-		.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4  },
-		.sources	= &clkset_spi_mmc,
-	}, {
-		.clk	= {
-			.name		= "mmc_bus",
-			.devname	= "s3c-sdhci.1",
-			.ctrlbit        = S3C_CLKCON_SCLK_MMC1,
-			.enable		= s3c64xx_sclk_ctrl,
-		},
-		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 20, .size = 2  },
-		.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4  },
-		.sources	= &clkset_spi_mmc,
-	}, {
-		.clk	= {
-			.name		= "mmc_bus",
-			.devname	= "s3c-sdhci.2",
-			.ctrlbit        = S3C_CLKCON_SCLK_MMC2,
-			.enable		= s3c64xx_sclk_ctrl,
-		},
-		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 22, .size = 2  },
-		.reg_div 	= { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4  },
-		.sources	= &clkset_spi_mmc,
-	}, {
-		.clk	= {
 			.name		= "usb-bus-host",
 			.ctrlbit        = S3C_CLKCON_SCLK_UHOST,
 			.enable		= s3c64xx_sclk_ctrl,
@@ -617,35 +596,6 @@ static struct clksrc_clk clksrcs[] = {
 		.sources	= &clkset_uhost,
 	}, {
 		.clk	= {
-			.name		= "uclk1",
-			.ctrlbit        = S3C_CLKCON_SCLK_UART,
-			.enable		= s3c64xx_sclk_ctrl,
-		},
-		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 13, .size = 1  },
-		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4  },
-		.sources	= &clkset_uart,
-	}, {
-/* Where does UCLK0 come from? */
-		.clk	= {
-			.name		= "spi-bus",
-			.devname	= "s3c64xx-spi.0",
-			.ctrlbit        = S3C_CLKCON_SCLK_SPI0,
-			.enable		= s3c64xx_sclk_ctrl,
-		},
-		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 14, .size = 2  },
-		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4  },
-		.sources	= &clkset_spi_mmc,
-	}, {
-		.clk	= {
-			.name		= "spi-bus",
-			.devname	= "s3c64xx-spi.1",
-			.enable		= s3c64xx_sclk_ctrl,
-		},
-		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 16, .size = 2  },
-		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4  },
-		.sources	= &clkset_spi_mmc,
-	}, {
-		.clk	= {
 			.name		= "audio-bus",
 			.devname	= "samsung-i2s.0",
 			.ctrlbit        = S3C_CLKCON_SCLK_AUDIO0,
@@ -695,6 +645,78 @@ static struct clksrc_clk clksrcs[] = {
 	},
 };
 
+/* Where does UCLK0 come from? */
+static struct clksrc_clk clk_sclk_uclk = {
+	.clk	= {
+		.name		= "uclk1",
+		.ctrlbit        = S3C_CLKCON_SCLK_UART,
+		.enable		= s3c64xx_sclk_ctrl,
+	},
+	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 13, .size = 1  },
+	.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4  },
+	.sources	= &clkset_uart,
+};
+
+static struct clksrc_clk clk_sclk_mmc0 = {
+	.clk	= {
+		.name		= "mmc_bus",
+		.devname	= "s3c-sdhci.0",
+		.ctrlbit        = S3C_CLKCON_SCLK_MMC0,
+		.enable		= s3c64xx_sclk_ctrl,
+	},
+	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 18, .size = 2  },
+	.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4  },
+	.sources	= &clkset_spi_mmc,
+};
+
+static struct clksrc_clk clk_sclk_mmc1 = {
+	.clk	= {
+		.name		= "mmc_bus",
+		.devname	= "s3c-sdhci.1",
+		.ctrlbit        = S3C_CLKCON_SCLK_MMC1,
+		.enable		= s3c64xx_sclk_ctrl,
+	},
+	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 20, .size = 2  },
+	.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4  },
+	.sources	= &clkset_spi_mmc,
+};
+
+static struct clksrc_clk clk_sclk_mmc2 = {
+	.clk	= {
+		.name		= "mmc_bus",
+		.devname	= "s3c-sdhci.2",
+		.ctrlbit        = S3C_CLKCON_SCLK_MMC2,
+		.enable		= s3c64xx_sclk_ctrl,
+	},
+	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 22, .size = 2  },
+	.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4  },
+	.sources	= &clkset_spi_mmc,
+};
+
+static struct clksrc_clk clk_sclk_spi0 = {
+	.clk	= {
+		.name		= "spi-bus",
+		.devname	= "s3c64xx-spi.0",
+		.ctrlbit	= S3C_CLKCON_SCLK_SPI0,
+		.enable		= s3c64xx_sclk_ctrl,
+	},
+	.reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 },
+	.reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 },
+	.sources = &clkset_spi_mmc,
+};
+
+static struct clksrc_clk clk_sclk_spi1 = {
+	.clk	= {
+		.name		= "spi-bus",
+		.devname	= "s3c64xx-spi.1",
+		.ctrlbit	= S3C_CLKCON_SCLK_SPI1,
+		.enable		= s3c64xx_sclk_ctrl,
+	},
+	.reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 },
+	.reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 },
+	.sources = &clkset_spi_mmc,
+};
+
 /* Clock initialisation code */
 
 static struct clksrc_clk *init_parents[] = {
@@ -703,9 +725,42 @@ static struct clksrc_clk *init_parents[] = {
 	&clk_mout_mpll,
 };
 
+static struct clksrc_clk *clksrc_cdev[] = {
+	&clk_sclk_uclk,
+	&clk_sclk_mmc0,
+	&clk_sclk_mmc1,
+	&clk_sclk_mmc2,
+	&clk_sclk_spi0,
+	&clk_sclk_spi1,
+};
+
+static struct clk *clk_cdev[] = {
+	&clk_hsmmc0,
+	&clk_hsmmc1,
+	&clk_hsmmc2,
+	&clk_48m_spi0,
+	&clk_48m_spi1,
+};
+
+static struct clk_lookup s3c64xx_clk_lookup[] = {
+	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
+	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
+	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
+	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
+	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
+	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
+	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
+	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
+	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_48m_spi0),
+	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_48m_spi1),
+};
+
 #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
 
-void __init_or_cpufreq s3c6400_setup_clocks(void)
+void __init_or_cpufreq s3c64xx_setup_clocks(void)
 {
 	struct clk *xtal_clk;
 	unsigned long xtal;
@@ -804,13 +859,15 @@ static struct clk *clks[] __initdata = {
  * as ARMCLK as well as the necessary parent clocks.
  *
  * This call does not setup the clocks, which is left to the
- * s3c6400_setup_clocks() call which may be needed by the cpufreq
+ * s3c64xx_setup_clocks() call which may be needed by the cpufreq
  * or resume code to re-set the clocks if the bootloader has changed
  * them.
  */
 void __init s3c64xx_register_clocks(unsigned long xtal, 
 				    unsigned armclk_divlimit)
 {
+	unsigned int cnt;
+
 	armclk_mask = armclk_divlimit;
 
 	s3c24xx_register_baseclocks(xtal);
@@ -821,7 +878,15 @@ void __init s3c64xx_register_clocks(unsigned long xtal,
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
+	for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++)
+		s3c_disable_clocks(clk_cdev[cnt], 1);
+
 	s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1));
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	for (cnt = 0; cnt < ARRAY_SIZE(clksrc_cdev); cnt++)
+		s3c_register_clksrc(clksrc_cdev[cnt], 1);
+	clkdev_add_table(s3c64xx_clk_lookup, ARRAY_SIZE(s3c64xx_clk_lookup));
+
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s3c64xx/irq-eint.c b/arch/arm/mach-s3c64xx/common.c
index 4d203be..35182ba 100644
--- a/arch/arm/mach-s3c64xx/irq-eint.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -1,11 +1,13 @@
-/* arch/arm/plat-s3c64xx/irq-eint.c
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
  *
- * S3C64XX - Interrupt handling for IRQ_EINT(x)
+ * Common Codes for S3C64XX machines
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -13,21 +15,183 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/ioport.h>
 #include <linux/sysdev.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
 
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
 #include <asm/hardware/vic.h>
 
-#include <plat/regs-irqtype.h>
+#include <mach/map.h>
+#include <mach/hardware.h>
 #include <mach/regs-gpio.h>
-#include <plat/gpio-cfg.h>
 
-#include <mach/map.h>
 #include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
 #include <plat/pm.h>
+#include <plat/gpio-cfg.h>
+#include <plat/irq-uart.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/regs-irqtype.h>
+#include <plat/regs-serial.h>
+#include <plat/watchdog-reset.h>
+
+#include "common.h"
+
+/* uart registration process */
+
+void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
+}
+
+/* table of supported CPUs */
+
+static const char name_s3c6400[] = "S3C6400";
+static const char name_s3c6410[] = "S3C6410";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= S3C6400_CPU_ID,
+		.idmask		= S3C64XX_CPU_MASK,
+		.map_io		= s3c6400_map_io,
+		.init_clocks	= s3c6400_init_clocks,
+		.init_uarts	= s3c64xx_init_uarts,
+		.init		= s3c6400_init,
+		.name		= name_s3c6400,
+	}, {
+		.idcode		= S3C6410_CPU_ID,
+		.idmask		= S3C64XX_CPU_MASK,
+		.map_io		= s3c6410_map_io,
+		.init_clocks	= s3c6410_init_clocks,
+		.init_uarts	= s3c64xx_init_uarts,
+		.init		= s3c6410_init,
+		.name		= name_s3c6410,
+	},
+};
+
+/* minimal IO mapping */
+
+/* see notes on uart map in arch/arm/mach-s3c64xx/include/mach/debug-macro.S */
+#define UART_OFFS (S3C_PA_UART & 0xfffff)
+
+static struct map_desc s3c_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_SYSCON),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_MEM,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_SROM),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)(S3C_VA_UART + UART_OFFS),
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_TIMER,
+		.pfn		= __phys_to_pfn(S3C_PA_TIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C64XX_VA_GPIO,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C64XX_VA_MODEM,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_MODEM),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_WATCHDOG),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
+		.length		= SZ_1K,
+		.type		= MT_DEVICE,
+	},
+};
+
+struct sysdev_class s3c64xx_sysclass = {
+	.name	= "s3c64xx-core",
+};
+
+static struct sys_device s3c64xx_sysdev = {
+	.cls	= &s3c64xx_sysclass,
+};
+
+/* read cpu identification code */
+
+void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
+{
+	/* initialise the io descriptors we need for initialisation */
+	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
+	iotable_init(mach_desc, size);
+	init_consistent_dma_size(SZ_8M);
+
+	/* detect cpu id */
+	s3c64xx_init_cpu();
+
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+static __init int s3c64xx_sysdev_init(void)
+{
+	sysdev_class_register(&s3c64xx_sysclass);
+	return sysdev_register(&s3c64xx_sysdev);
+}
+core_initcall(s3c64xx_sysdev_init);
+
+/*
+ * setup the sources the vic should advertise resume
+ * for, even though it is not doing the wake
+ * (set_irq_wake needs to be valid)
+ */
+#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
+#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) |	\
+			 1 << (IRQ_PENDN - IRQ_VIC1_BASE) |	\
+			 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) |	\
+			 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) |	\
+			 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
+
+void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
+{
+	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+	/* initialise the pair of VICs */
+	vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
+	vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
+
+	/* add the timer sub-irqs */
+	s3c_init_vic_timer_irq(5, IRQ_TIMER0);
+}
 
 #define eint_offset(irq)	((irq) - IRQ_EINT(0))
 #define eint_irq_to_bit(irq)	((u32)(1 << eint_offset(irq)))
@@ -209,5 +373,13 @@ static int __init s3c64xx_init_irq_eint(void)
 
 	return 0;
 }
-
 arch_initcall(s3c64xx_init_irq_eint);
+
+void s3c64xx_restart(char mode, const char *cmd)
+{
+	if (mode != 's')
+		arch_wdt_reset();
+
+	/* if all else fails, or mode was for soft, jump to 0 */
+	soft_restart(0);
+}
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
new file mode 100644
index 0000000..8dc8ab6
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Common Header for S3C64XX machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C64XX_COMMON_H
+#define __ARCH_ARM_MACH_S3C64XX_COMMON_H
+
+void s3c64xx_init_irq(u32 vic0, u32 vic1);
+void s3c64xx_init_io(struct map_desc *mach_desc, int size);
+
+void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
+void s3c64xx_setup_clocks(void);
+
+void s3c64xx_restart(char mode, const char *cmd);
+
+extern struct syscore_ops s3c64xx_irq_syscore_ops;
+extern struct sysdev_class s3c64xx_sysclass;
+
+#ifdef CONFIG_CPU_S3C6400
+
+extern  int s3c6400_init(void);
+extern void s3c6400_init_irq(void);
+extern void s3c6400_map_io(void);
+extern void s3c6400_init_clocks(int xtal);
+
+#else
+#define s3c6400_init_clocks NULL
+#define s3c6400_map_io NULL
+#define s3c6400_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C6410
+
+extern  int s3c6410_init(void);
+extern void s3c6410_init_irq(void);
+extern void s3c6410_map_io(void);
+extern void s3c6410_init_clocks(int xtal);
+
+#else
+#define s3c6410_init_clocks NULL
+#define s3c6410_map_io NULL
+#define s3c6410_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */
diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
deleted file mode 100644
index de085b7..0000000
--- a/arch/arm/mach-s3c64xx/cpu.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/cpu.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX CPU Support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/regs-serial.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
-
-/* table of supported CPUs */
-
-static const char name_s3c6400[] = "S3C6400";
-static const char name_s3c6410[] = "S3C6410";
-
-static struct cpu_table cpu_ids[] __initdata = {
-	{
-		.idcode		= S3C6400_CPU_ID,
-		.idmask		= S3C64XX_CPU_MASK,
-		.map_io		= s3c6400_map_io,
-		.init_clocks	= s3c6400_init_clocks,
-		.init_uarts	= s3c6400_init_uarts,
-		.init		= s3c6400_init,
-		.name		= name_s3c6400,
-	}, {
-		.idcode		= S3C6410_CPU_ID,
-		.idmask		= S3C64XX_CPU_MASK,
-		.map_io		= s3c6410_map_io,
-		.init_clocks	= s3c6410_init_clocks,
-		.init_uarts	= s3c6410_init_uarts,
-		.init		= s3c6410_init,
-		.name		= name_s3c6410,
-	},
-};
-
-/* minimal IO mapping */
-
-/* see notes on uart map in arch/arm/mach-s3c6400/include/mach/debug-macro.S */
-#define UART_OFFS (S3C_PA_UART & 0xfffff)
-
-static struct map_desc s3c_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S3C_VA_SYS,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_SYSCON),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_MEM,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_SROM),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)(S3C_VA_UART + UART_OFFS),
-		.pfn		= __phys_to_pfn(S3C_PA_UART),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC0,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC0),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC1,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC1),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_TIMER,
-		.pfn		= __phys_to_pfn(S3C_PA_TIMER),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C64XX_VA_GPIO,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_GPIO),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C64XX_VA_MODEM,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_MODEM),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_WATCHDOG),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
-		.length		= SZ_1K,
-		.type		= MT_DEVICE,
-	},
-};
-
-
-struct sysdev_class s3c64xx_sysclass = {
-	.name	= "s3c64xx-core",
-};
-
-static struct sys_device s3c64xx_sysdev = {
-	.cls	= &s3c64xx_sysclass,
-};
-
-/* uart registration process */
-
-void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
-}
-
-/* read cpu identification code */
-
-void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
-{
-	/* initialise the io descriptors we need for initialisation */
-	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
-	iotable_init(mach_desc, size);
-	init_consistent_dma_size(SZ_8M);
-
-	/* detect cpu id */
-	s3c64xx_init_cpu();
-
-	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
-
-static __init int s3c64xx_sysdev_init(void)
-{
-	sysdev_class_register(&s3c64xx_sysclass);
-	return sysdev_register(&s3c64xx_sysdev);
-}
-
-core_initcall(s3c64xx_sysdev_init);
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
deleted file mode 100644
index 3341fd1..0000000
--- a/arch/arm/mach-s3c64xx/dev-spi.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/dev-spi.c
- *
- * Copyright (C) 2009 Samsung Electronics Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/spi-clocks.h>
-#include <mach/irqs.h>
-
-#include <plat/s3c64xx-spi.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-
-static char *spi_src_clks[] = {
-	[S3C64XX_SPI_SRCCLK_PCLK] = "pclk",
-	[S3C64XX_SPI_SRCCLK_SPIBUS] = "spi-bus",
-	[S3C64XX_SPI_SRCCLK_48M] = "spi_48m",
-};
-
-/* SPI Controller platform_devices */
-
-/* Since we emulate multi-cs capability, we do not touch the GPC-3,7.
- * The emulated CS is toggled by board specific mechanism, as it can
- * be either some immediate GPIO or some signal out of some other
- * chip in between ... or some yet another way.
- * We simply do not assume anything about CS.
- */
-static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev)
-{
-	unsigned int base;
-
-	switch (pdev->id) {
-	case 0:
-		base = S3C64XX_GPC(0);
-		break;
-
-	case 1:
-		base = S3C64XX_GPC(4);
-		break;
-
-	default:
-		dev_err(&pdev->dev, "Invalid SPI Controller number!");
-		return -EINVAL;
-	}
-
-	s3c_gpio_cfgall_range(base, 3,
-			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-
-	return 0;
-}
-
-static struct resource s3c64xx_spi0_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_SPI0,
-		.end   = S3C64XX_PA_SPI0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_SPI0_TX,
-		.end   = DMACH_SPI0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_SPI0_RX,
-		.end   = DMACH_SPI0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = IRQ_SPI0,
-		.end   = IRQ_SPI0,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
-	.cfg_gpio = s3c64xx_spi_cfg_gpio,
-	.fifo_lvl_mask = 0x7f,
-	.rx_lvl_offset = 13,
-	.tx_st_done = 21,
-};
-
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s3c64xx_device_spi0 = {
-	.name		  = "s3c64xx-spi",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_spi0_resource),
-	.resource	  = s3c64xx_spi0_resource,
-	.dev = {
-		.dma_mask		= &spi_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data = &s3c64xx_spi0_pdata,
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_spi0);
-
-static struct resource s3c64xx_spi1_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_SPI1,
-		.end   = S3C64XX_PA_SPI1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_SPI1_TX,
-		.end   = DMACH_SPI1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_SPI1_RX,
-		.end   = DMACH_SPI1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = IRQ_SPI1,
-		.end   = IRQ_SPI1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
-	.cfg_gpio = s3c64xx_spi_cfg_gpio,
-	.fifo_lvl_mask = 0x7f,
-	.rx_lvl_offset = 13,
-	.tx_st_done = 21,
-};
-
-struct platform_device s3c64xx_device_spi1 = {
-	.name		  = "s3c64xx-spi",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_spi1_resource),
-	.resource	  = s3c64xx_spi1_resource,
-	.dev = {
-		.dma_mask		= &spi_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data = &s3c64xx_spi1_pdata,
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_spi1);
-
-void __init s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
-{
-	struct s3c64xx_spi_info *pd;
-
-	/* Reject invalid configuration */
-	if (!num_cs || src_clk_nr < 0
-			|| src_clk_nr > S3C64XX_SPI_SRCCLK_48M) {
-		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
-		return;
-	}
-
-	switch (cntrlr) {
-	case 0:
-		pd = &s3c64xx_spi0_pdata;
-		break;
-	case 1:
-		pd = &s3c64xx_spi1_pdata;
-		break;
-	default:
-		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
-							__func__, cntrlr);
-		return;
-	}
-
-	pd->num_cs = num_cs;
-	pd->src_clk_nr = src_clk_nr;
-	pd->src_clk_name = spi_src_clks[src_clk_nr];
-}
diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
index 23a1d71..8e2097b 100644
--- a/arch/arm/mach-s3c64xx/include/mach/map.h
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -115,6 +115,8 @@
 #define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
 #define S3C_PA_RTC		S3C64XX_PA_RTC
 #define S3C_PA_WDT		S3C64XX_PA_WATCHDOG
+#define S3C_PA_SPI0		S3C64XX_PA_SPI0
+#define S3C_PA_SPI1		S3C64XX_PA_SPI1
 
 #define SAMSUNG_PA_ADC		S3C64XX_PA_ADC
 #define SAMSUNG_PA_CFCON	S3C64XX_PA_CFCON
diff --git a/arch/arm/mach-s3c64xx/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h
index d8ca578..353ed43 100644
--- a/arch/arm/mach-s3c64xx/include/mach/system.h
+++ b/arch/arm/mach-s3c64xx/include/mach/system.h
@@ -11,20 +11,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
-#include <plat/watchdog-reset.h>
-
 static void arch_idle(void)
 {
 	/* nothing here yet */
 }
 
-static void arch_reset(char mode, const char *cmd)
-{
-	if (mode != 's')
-		arch_wdt_reset();
-
-	/* if all else fails, or mode was for soft, jump to 0 */
-	soft_restart(0);
-}
-
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c
deleted file mode 100644
index b07357e..0000000
--- a/arch/arm/mach-s3c64xx/irq.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/* arch/arm/plat-s3c64xx/irq.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-#include <plat/irq-vic-timer.h>
-#include <plat/irq-uart.h>
-#include <plat/cpu.h>
-
-/* setup the sources the vic should advertise resume for, even though it
- * is not doing the wake (set_irq_wake needs to be valid) */
-#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
-#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) |	\
-			 1 << (IRQ_PENDN - IRQ_VIC1_BASE) |	\
-			 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) |	\
-			 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) |	\
-			 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
-
-void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
-{
-	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
-
-	/* initialise the pair of VICs */
-	vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
-	vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
-
-	/* add the timer sub-irqs */
-	s3c_init_vic_timer_irq(5, IRQ_TIMER0);
-}
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 2bbc14d..b86f277 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -46,13 +46,14 @@
 #include <plat/fb.h>
 #include <plat/regs-fb-v4.h>
 
-#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-modem.h>
 
+#include "common.h"
+
 /* DM9000 */
 #define ANW6410_PA_DM9000	(0x18000000)
 
@@ -241,4 +242,5 @@ MACHINE_START(ANW6410, "A&W6410")
 	.map_io		= anw6410_map_io,
 	.init_machine	= anw6410_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 799558c..25d9f0c 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -53,7 +53,6 @@
 
 #include <mach/regs-gpio-memport.h>
 
-#include <plat/s3c6410.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-fb-v4.h>
 #include <plat/fb.h>
@@ -69,6 +68,8 @@
 #include <plat/iic.h>
 #include <plat/pm.h>
 
+#include "common.h"
+
 /* serial port setup */
 
 #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
@@ -749,4 +750,5 @@ MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
 	.map_io		= crag6410_map_io,
 	.init_machine	= crag6410_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index c5955f3..521e07b 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -38,12 +38,13 @@
 #include <plat/fb.h>
 #include <plat/nand.h>
 
-#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/regs-fb-v4.h>
 
+#include "common.h"
+
 #define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
 #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
@@ -272,4 +273,5 @@ MACHINE_START(HMT, "Airgoo-HMT")
 	.map_io		= hmt_map_io,
 	.init_machine	= hmt_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 4415c85..c34c2ab 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -34,7 +34,6 @@
 #include <mach/regs-modem.h>
 #include <mach/regs-srom.h>
 
-#include <plat/s3c6410.h>
 #include <plat/adc.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -46,6 +45,8 @@
 
 #include <video/platform_lcd.h>
 
+#include "common.h"
+
 #define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
 #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
@@ -350,4 +351,5 @@ MACHINE_START(MINI6410, "MINI6410")
 	.map_io		= mini6410_map_io,
 	.init_machine	= mini6410_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 9b2c610..0efa2ba 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -40,12 +40,13 @@
 #include <plat/iic.h>
 #include <plat/fb.h>
 
-#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/regs-fb-v4.h>
 
+#include "common.h"
+
 #define UCON S3C2410_UCON_DEFAULT
 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
@@ -104,4 +105,5 @@ MACHINE_START(NCP, "NCP")
 	.map_io		= ncp_map_io,
 	.init_machine	= ncp_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index dbab49f..be2a9a2 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -35,7 +35,6 @@
 #include <mach/regs-modem.h>
 #include <mach/regs-srom.h>
 
-#include <plat/s3c6410.h>
 #include <plat/adc.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -47,6 +46,8 @@
 
 #include <video/platform_lcd.h>
 
+#include "common.h"
+
 #define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
 #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
@@ -331,4 +332,5 @@ MACHINE_START(REAL6410, "REAL6410")
 	.map_io		= real6410_map_io,
 	.init_machine	= real6410_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index cb1ebeb..ce31db1 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -40,6 +40,8 @@
 
 #include <video/platform_lcd.h>
 
+#include "common.h"
+
 #define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
 #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 0539452..3f42431 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -24,13 +24,13 @@
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/s3c6410.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 #include <plat/regs-fb-v4.h>
 
+#include "common.h"
 #include "mach-smartq.h"
 
 static struct gpio_led smartq5_leds[] = {
@@ -153,4 +153,5 @@ MACHINE_START(SMARTQ5, "SmartQ 5")
 	.map_io		= smartq_map_io,
 	.init_machine	= smartq5_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index a58d1ba..e5c09b6 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -24,13 +24,13 @@
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/s3c6410.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 #include <plat/regs-fb-v4.h>
 
+#include "common.h"
 #include "mach-smartq.h"
 
 static struct gpio_led smartq7_leds[] = {
@@ -169,4 +169,5 @@ MACHINE_START(SMARTQ7, "SmartQ 7")
 	.map_io		= smartq_map_io,
 	.init_machine	= smartq7_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index be28a59..5f09653 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -32,12 +32,13 @@
 
 #include <plat/regs-serial.h>
 
-#include <plat/s3c6400.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/iic.h>
 
+#include "common.h"
+
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
@@ -93,4 +94,5 @@ MACHINE_START(SMDK6400, "SMDK6400")
 	.map_io		= smdk6400_map_io,
 	.init_machine	= smdk6400_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 0830915..ca6fc20 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -64,7 +64,6 @@
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 
-#include <plat/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -74,6 +73,8 @@
 #include <plat/backlight.h>
 #include <plat/regs-fb-v4.h>
 
+#include "common.h"
+
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
@@ -705,4 +706,5 @@ MACHINE_START(SMDK6410, "SMDK6410")
 	.map_io		= smdk6410_map_io,
 	.init_machine	= smdk6410_machine_init,
 	.timer		= &s3c24xx_timer,
+	.restart	= s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 51c00f2..b1e1571 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -38,7 +38,8 @@
 #include <plat/sdhci.h>
 #include <plat/iic-core.h>
 #include <plat/onenand-core.h>
-#include <plat/s3c6400.h>
+
+#include "common.h"
 
 void __init s3c6400_map_io(void)
 {
@@ -60,7 +61,7 @@ void __init s3c6400_map_io(void)
 void __init s3c6400_init_clocks(int xtal)
 {
 	s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK);
-	s3c6400_setup_clocks();
+	s3c64xx_setup_clocks();
 }
 
 void __init s3c6400_init_irq(void)
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 4117003..fba71bd 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -41,8 +41,8 @@
 #include <plat/adc-core.h>
 #include <plat/iic-core.h>
 #include <plat/onenand-core.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
+
+#include "common.h"
 
 void __init s3c6410_map_io(void)
 {
@@ -66,7 +66,7 @@ void __init s3c6410_init_clocks(int xtal)
 {
 	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
 	s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK);
-	s3c6400_setup_clocks();
+	s3c64xx_setup_clocks();
 }
 
 void __init s3c6410_init_irq(void)
diff --git a/arch/arm/mach-s3c64xx/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c
deleted file mode 100644
index c75a71b..0000000
--- a/arch/arm/mach-s3c64xx/setup-sdhci.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/setup-sdhci.c
- *
- * Copyright 2008 Simtec Electronics
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C6400/S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/types.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *s3c64xx_hsmmc_clksrcs[4] = {
-	[0] = "hsmmc",
-	[1] = "hsmmc",
-	[2] = "mmc_bus",
-	/* [3] = "48m", - note not successfully used yet */
-};
diff --git a/arch/arm/mach-s3c64xx/setup-spi.c b/arch/arm/mach-s3c64xx/setup-spi.c
new file mode 100644
index 0000000..d9592ad
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-spi.c
@@ -0,0 +1,45 @@
+/* linux/arch/arm/mach-s3c64xx/setup-spi.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 13,
+	.tx_st_done	= 21,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S3C64XX_GPC(0), 3,
+				S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 13,
+	.tx_st_done	= 21,
+};
+
+int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S3C64XX_GPC(4), 3,
+				S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+	return 0;
+}
+#endif