ARM: s3c64xx: Remove legacy DMA driver

Since support for generic PL08x DMA engine driver has been added, there
is no need to keep the old legacy driver, so this patch removes it.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

1 files changed, 0 insertions, 123 deletions

diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
index 26a6bc3..059b1fc 100644
--- a/arch/arm/mach-s3c64xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -11,127 +11,6 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H __FILE__
 
-#ifdef CONFIG_S3C64XX_DMA
-
-#define S3C_DMA_CHANNELS	(16)
-
-/* see mach-s3c2410/dma.h for notes on dma channel numbers */
-
-/* Note, for the S3C64XX architecture we keep the DMACH_
- * defines in the order they are allocated to [S]DMA0/[S]DMA1
- * so that is easy to do DHACH_ -> DMA controller conversion
- */
-enum dma_ch {
-	/* DMA0/SDMA0 */
-	DMACH_UART0 = 0,
-	DMACH_UART0_SRC2,
-	DMACH_UART1,
-	DMACH_UART1_SRC2,
-	DMACH_UART2,
-	DMACH_UART2_SRC2,
-	DMACH_UART3,
-	DMACH_UART3_SRC2,
-	DMACH_PCM0_TX,
-	DMACH_PCM0_RX,
-	DMACH_I2S0_OUT,
-	DMACH_I2S0_IN,
-	DMACH_SPI0_TX,
-	DMACH_SPI0_RX,
-	DMACH_HSI_I2SV40_TX,
-	DMACH_HSI_I2SV40_RX,
-
-	/* DMA1/SDMA1 */
-	DMACH_PCM1_TX = 16,
-	DMACH_PCM1_RX,
-	DMACH_I2S1_OUT,
-	DMACH_I2S1_IN,
-	DMACH_SPI1_TX,
-	DMACH_SPI1_RX,
-	DMACH_AC97_PCMOUT,
-	DMACH_AC97_PCMIN,
-	DMACH_AC97_MICIN,
-	DMACH_PWM,
-	DMACH_IRDA,
-	DMACH_EXTERNAL,
-	DMACH_RES1,
-	DMACH_RES2,
-	DMACH_SECURITY_RX,	/* SDMA1 only */
-	DMACH_SECURITY_TX,	/* SDMA1 only */
-	DMACH_MAX		/* the end */
-};
-
-static inline bool samsung_dma_has_circular(void)
-{
-	return true;
-}
-
-static inline bool samsung_dma_is_dmadev(void)
-{
-	return false;
-}
-#define S3C2410_DMAF_CIRCULAR		(1 << 0)
-
-#include <plat/dma.h>
-
-#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
-
-struct s3c64xx_dma_buff;
-
-/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
- * @next: Pointer to next buffer in queue or ring.
- * @pw: Client provided identifier
- * @lli: Pointer to hardware descriptor this buffer is associated with.
- * @lli_dma: Hardare address of the descriptor.
- */
-struct s3c64xx_dma_buff {
-	struct s3c64xx_dma_buff *next;
-
-	void			*pw;
-	struct pl080s_lli	*lli;
-	dma_addr_t		 lli_dma;
-};
-
-struct s3c64xx_dmac;
-
-struct s3c2410_dma_chan {
-	unsigned char		 number;      /* number of this dma channel */
-	unsigned char		 in_use;      /* channel allocated */
-	unsigned char		 bit;	      /* bit for enable/disable/etc */
-	unsigned char		 hw_width;
-	unsigned char		 peripheral;
-
-	unsigned int		 flags;
-	enum dma_data_direction	 source;
-
-
-	dma_addr_t		dev_addr;
-
-	struct s3c2410_dma_client *client;
-	struct s3c64xx_dmac	*dmac;		/* pointer to controller */
-
-	void __iomem		*regs;
-
-	/* cdriver callbacks */
-	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
-	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
-
-	/* buffer list and information */
-	struct s3c64xx_dma_buff	*curr;		/* current dma buffer */
-	struct s3c64xx_dma_buff	*next;		/* next buffer to load */
-	struct s3c64xx_dma_buff	*end;		/* end of queue */
-
-	/* note, when channel is running in circular mode, curr is the
-	 * first buffer enqueued, end is the last and curr is where the
-	 * last buffer-done event is set-at. The buffers are not freed
-	 * and the last buffer hardware descriptor points back to the
-	 * first.
-	 */
-};
-
-#include <plat/dma-core.h>
-
-#else
-
 #define S3C64XX_DMA_CHAN(name)		((unsigned long)(name))
 
 /* DMA0/SDMA0 */
@@ -189,6 +68,4 @@ static inline bool samsung_dma_is_dmadev(void)
 #include <linux/amba/pl08x.h>
 #include <plat/dma-ops.h>
 
-#endif
-
 #endif /* __ASM_ARCH_IRQ_H */