Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform code updates from Arnd Bergmann:
 "This branch is the culmination of 5 years of effort to bring the ARMv6
  and ARMv7 platforms together such that they can all be enabled and
  boot the same kernel.  It has been a tremendous amount of cleanup and
  refactoring by a huge number of people, and creation of several new
  (and major) subsystems to better abstract out all the platform details
  in an appropriate manner.

  The bulk of this branch is a large patchset from Arnd that brings
  several of the more minor and older platforms we have closer to
  multiplatform support.  Among these are MMP, S3C64xx, Orion5x, mv78xx0
  and realview Much of this is moving around header files from old mach
  directories, but there are also some cleanup patches of debug_ll
  (lowlevel debug per-platform options) and other parts.

  Linus Walleij also has some patchs to clean up the older ARM Realview
  platforms by finally introducing DT support, and Rob Herring has some
  for ARM Versatile which is now DT-only.  Both of these platforms are
  now multiplatform.

  Finally, a couple of patches from Russell for Dove PMU, and a fix from
  Valentin Rothberg for Exynos ADC, which were rebased on top of the
  series to avoid conflicts"

* tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
  ARM: realview: don't select SMP_ON_UP for UP builds
  ARM: s3c: simplify s3c_irqwake_{e,}intallow definition
  ARM: s3c64xx: fix pm-debug compilation
  iio: exynos-adc: fix irqf_oneshot.cocci warnings
  ARM: realview: build realview-dt SMP support only when used
  ARM: realview: select apropriate targets
  ARM: realview: clean up header files
  ARM: realview: make all header files local
  ARM: no longer make CPU targets visible separately
  ARM: integrator: use explicit core module options
  ARM: realview: enable multiplatform
  ARM: make default platform work for NOMMU
  ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location
  ARM: defconfig: use correct debug_ll settings
  ARM: versatile: convert to multi-platform
  ARM: versatile: merge mach code into a single file
  ARM: versatile: switch to DT only booting and remove legacy code
  ARM: versatile: add DT based PCI detection
  ARM: pxa: mark ezx structures as __maybe_unused
  ARM: pxa: mark raumfeld init functions as __maybe_unused
  ...

1 files changed, 30 insertions, 1 deletions

diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 28c7097..7c0c420 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -2,6 +2,26 @@
 #	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
 #
 # Licensed under GPLv2
+menuconfig ARCH_S3C64XX
+	bool "Samsung S3C64XX" if ARCH_MULTI_V6
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
+	select ARM_VIC
+	select CLKSRC_SAMSUNG_PWM
+	select COMMON_CLK_SAMSUNG
+	select GPIO_SAMSUNG if ATAGS
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select HAVE_TCM
+	select PLAT_SAMSUNG
+	select PM_GENERIC_DOMAINS if PM
+	select S3C_DEV_NAND if ATAGS
+	select S3C_GPIO_TRACK if ATAGS
+	select SAMSUNG_ATAGS if ATAGS
+	select SAMSUNG_WAKEMASK if PM
+	select SAMSUNG_WDT_RESET
+	help
+	  Samsung S3C64XX series based systems
 
 if ARCH_S3C64XX
 
@@ -90,6 +110,7 @@ config S3C64XX_SETUP_USB_PHY
 
 config MACH_SMDK6400
        bool "SMDK6400"
+	depends on ATAGS
 	select CPU_S3C6400
 	select S3C64XX_SETUP_SDHCI
 	select S3C_DEV_HSMMC1
@@ -100,6 +121,7 @@ config MACH_SMDK6400
 
 config MACH_ANW6410
 	bool "A&W6410"
+	depends on ATAGS
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C_DEV_FB
@@ -108,6 +130,7 @@ config MACH_ANW6410
 
 config MACH_MINI6410
 	bool "MINI6410"
+	depends on ATAGS
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_SDHCI
@@ -123,6 +146,7 @@ config MACH_MINI6410
 
 config MACH_REAL6410
 	bool "REAL6410"
+	depends on ATAGS
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_SDHCI
@@ -138,6 +162,7 @@ config MACH_REAL6410
 
 config MACH_SMDK6410
 	bool "SMDK6410"
+	depends on ATAGS
 	select CPU_S3C6410
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select S3C64XX_SETUP_FB_24BPP
@@ -225,6 +250,7 @@ config SMDK6410_WM1192_EV1
 
 config MACH_NCP
 	bool "NCP"
+	depends on ATAGS
 	select CPU_S3C6410
 	select S3C64XX_SETUP_I2C1
 	select S3C_DEV_HSMMC1
@@ -234,6 +260,7 @@ config MACH_NCP
 
 config MACH_HMT
 	bool "Airgoo HMT"
+	depends on ATAGS
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C_DEV_FB
@@ -265,18 +292,21 @@ config MACH_SMARTQ
 
 config MACH_SMARTQ5
 	bool "SmartQ 5"
+	depends on ATAGS
 	select MACH_SMARTQ
 	help
 	    Machine support for the SmartQ 5
 
 config MACH_SMARTQ7
 	bool "SmartQ 7"
+	depends on ATAGS
 	select MACH_SMARTQ
 	help
 	    Machine support for the SmartQ 7
 
 config MACH_WLF_CRAGG_6410
 	bool "Wolfson Cragganmore 6410"
+	depends on ATAGS
 	depends on I2C=y
 	select CPU_S3C6410
 	select LEDS_GPIO_REGISTER
@@ -310,7 +340,6 @@ config MACH_S3C64XX_DT
 	select CPU_S3C6410
 	select PINCTRL
 	select PINCTRL_S3C64XX
-	select USE_OF
 	help
 	  Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
 	  enabled.