Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver specific changes from Arnd Bergmann:
 "These changes are all driver specific and cross over between arm-soc
  contents and some other subsystem, in these cases cpufreq, crypto,
  dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have
  these changes merged through arm-soc.

  As we proceed to untangle the dependencies between platform code and
  driver code, the amount of changes in this category is fortunately
  shrinking, for 3.11 we have 16 branches here and 101 non-merge
  changesets, the majority of which are for the stedma40 dma engine
  driver used in the ux500 platform.  Cleaning up that code touches
  multiple subsystems, but gets rid of the dependency in the end.

  The mailbox code moved out from mach-omap2 to drivers/mailbox is an
  intermediate step and is still omap specific at the moment.  Patches
  exist to generalize the subsystem and add other drivers with the same
  API, but those did not make it for 3.11."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits)
  crypto: ux500: use dmaengine_submit API
  crypto: ux500: use dmaengine_prep_slave_sg API
  crypto: ux500: use dmaengine_device_control API
  crypto: ux500/crypt: add missing __iomem qualifiers
  crypto: ux500/hash: add missing static qualifiers
  crypto: ux500/hash: use readl on iomem addresses
  dmaengine: ste_dma40: Declare memcpy config as static
  ARM: ux500: Remove mop500_snowball_ethernet_clock_enable()
  ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO
  ARM: ux500: Provide a AB8500 GPIO Device Tree node
  gpio: rcar: fix gpio_rcar_of_table
  gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections
  gpio-rcar: Reference core gpio documentation in the DT bindings
  clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2
  ARM: dts: Update Samsung I2S documentation
  ARM: dts: add clock provider information for i2s controllers in Exynos5250
  ARM: dts: add Exynos audio subsystem clock controller node
  clk: samsung: register audio subsystem clocks using common clock framework
  ARM: dts: use #include for all device trees for Samsung
  pinctrl: s3c24xx: use correct header for chained_irq functions
  ...

9 files changed, 28 insertions, 1685 deletions

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 0adb2b8..6d9252e 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -28,7 +28,7 @@ config CPU_S3C2410
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2410
 	select S3C2410_CLOCK
-	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
+	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
 	select S3C2410_PM if PM
 	select SAMSUNG_HRT
 	select SAMSUNG_WDT_RESET
@@ -206,27 +206,38 @@ config S3C24XX_GPIO_EXTRA128
 	  Add an extra 128 gpio numbers to the available GPIO pool. This is
 	  available for boards that need extra gpios for external devices.
 
+config S3C24XX_PLL
+	bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
+	depends on ARM_S3C24XX
+	help
+	  Compile in support for changing the PLL frequency from the
+	  S3C24XX series CPUfreq driver. The PLL takes time to settle
+	  after a frequency change, so by default it is not enabled.
+
+	  This also means that the PLL tables for the selected CPU(s) will
+	  be built which may increase the size of the kernel image.
+
 # cpu frequency items common between s3c2410 and s3c2440/s3c2442
 
 config S3C2410_IOTIMING
 	bool
-	depends on CPU_FREQ_S3C24XX
+	depends on ARM_S3C24XX_CPUFREQ
 	help
 	  Internal node to select io timing code that is common to the s3c2410
 	  and s3c2440/s3c2442 cpu frequency support.
 
 config S3C2410_CPUFREQ_UTILS
-	bool
-	depends on CPU_FREQ_S3C24XX
-	help
-	  Internal node to select timing code that is common to the s3c2410
-	  and s3c2440/s3c244 cpu frequency support.
+       bool
+       depends on ARM_S3C24XX_CPUFREQ
+       help
+         Internal node to select timing code that is common to the s3c2410
+         and s3c2440/s3c244 cpu frequency support.
 
 # cpu frequency support common to s3c2412, s3c2413 and s3c2442
 
 config S3C2412_IOTIMING
 	bool
-	depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+	depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2412 || CPU_S3C2443)
 	help
 	  Intel node to select io timing code that is common to the s3c2412
 	  and the s3c2443.
@@ -235,16 +246,9 @@ config S3C2412_IOTIMING
 
 if CPU_S3C2410
 
-config S3C2410_CPUFREQ
-	bool
-	depends on CPU_FREQ_S3C24XX
-	select S3C2410_CPUFREQ_UTILS
-	help
-	  CPU Frequency scaling support for S3C2410
-
 config S3C2410_PLL
 	bool
-	depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+	depends on ARM_S3C2410_CPUFREQ && S3C24XX_PLL
 	default y
 	help
 	  Select the PLL table for the S3C2410
@@ -280,7 +284,7 @@ config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
 	select ISA
 	select MACH_BAST_IDE
-	select S3C2410_IOTIMING if S3C2410_CPUFREQ
+	select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
 	select S3C24XX_DCLK
 	select S3C24XX_SIMTEC_NOR
 	select S3C24XX_SIMTEC_PM if PM
@@ -387,14 +391,6 @@ config CPU_S3C2412_ONLY
 		   !CPU_S3C2442 && !CPU_S3C2443
 	default y
 
-config S3C2412_CPUFREQ
-	bool
-	depends on CPU_FREQ_S3C24XX
-	default y
-	select S3C2412_IOTIMING
-	help
-	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
-
 config S3C2412_DMA
 	bool
 	help
@@ -508,14 +504,6 @@ endif	# CPU_S3C2416
 
 if CPU_S3C2440
 
-config S3C2440_CPUFREQ
-	bool "S3C2440/S3C2442 CPU Frequency scaling support"
-	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
-	default y
-	select S3C2410_CPUFREQ_UTILS
-	help
-	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
-
 config S3C2440_DMA
 	bool
 	help
@@ -535,15 +523,15 @@ config S3C2440_XTAL_16934400
 
 config S3C2440_PLL_12000000
 	bool
-	depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
-	default y if CPU_FREQ_S3C24XX_PLL
+	depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+	default y if S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
 
 config S3C2440_PLL_16934400
 	bool
-	depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
-	default y if CPU_FREQ_S3C24XX_PLL
+	depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+	default y if S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
 
@@ -597,7 +585,7 @@ config MACH_NEXCODER_2440
 
 config MACH_OSIRIS
 	bool "Simtec IM2440D20 (OSIRIS) module"
-	select S3C2410_IOTIMING if S3C2440_CPUFREQ
+	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 	select S3C2440_XTAL_12000000
 	select S3C24XX_DCLK
 	select S3C24XX_GPIO_EXTRA128
@@ -669,7 +657,7 @@ config MACH_RX1950
 	bool "HP iPAQ rx1950"
 	select I2C
 	select PM_H1940 if PM
-	select S3C2410_IOTIMING if S3C2440_CPUFREQ
+	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 	select S3C2440_XTAL_16934400
 	select S3C24XX_DCLK
 	select S3C24XX_PWM
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 6de730b..7f54e5b 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -17,13 +17,11 @@ obj-				:=
 obj-y				+= common.o
 
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
-obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpufreq-s3c2410.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma-s3c2410.o
 obj-$(CONFIG_S3C2410_PLL)	+= pll-s3c2410.o
 obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
 
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o clock-s3c2412.o
-obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpufreq-s3c2412.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma-s3c2412.o
 obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
 obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
@@ -34,7 +32,6 @@ obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o clock-s3c2440.o
 obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o clock-s3c244x.o
-obj-$(CONFIG_S3C2440_CPUFREQ)	+= cpufreq-s3c2440.o
 obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
 obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
 obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
@@ -59,9 +56,6 @@ obj-$(CONFIG_S3C2412_IOTIMING)	+= iotiming-s3c2412.o
 obj-$(CONFIG_S3C2443_COMMON)	+= common-s3c2443.o
 obj-$(CONFIG_S3C2443_DMA)	+= dma-s3c2443.o
 
-obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpufreq.o
-obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpufreq-debugfs.o
-
 #
 # machine support
 # following is ordered alphabetically by option text.
diff --git a/arch/arm/mach-s3c24xx/cpufreq-debugfs.c b/arch/arm/mach-s3c24xx/cpufreq-debugfs.c
deleted file mode 100644
index 9b7b428..0000000
--- a/arch/arm/mach-s3c24xx/cpufreq-debugfs.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * Copyright (c) 2009 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX CPU Frequency scaling - debugfs status support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/err.h>
-
-#include <plat/cpu-freq-core.h>
-
-static struct dentry *dbgfs_root;
-static struct dentry *dbgfs_file_io;
-static struct dentry *dbgfs_file_info;
-static struct dentry *dbgfs_file_board;
-
-#define print_ns(x) ((x) / 10), ((x) % 10)
-
-static void show_max(struct seq_file *seq, struct s3c_freq *f)
-{
-	seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n",
-		   f->fclk, f->hclk, f->pclk, f->armclk);
-}
-
-static int board_show(struct seq_file *seq, void *p)
-{
-	struct s3c_cpufreq_config *cfg;
-	struct s3c_cpufreq_board *brd;
-
-	cfg = s3c_cpufreq_getconfig();
-	if (!cfg) {
-		seq_printf(seq, "no configuration registered\n");
-		return 0;
-	}
-
-	brd = cfg->board;
-	if (!brd) {
-		seq_printf(seq, "no board definition set?\n");
-		return 0;
-	}
-
-	seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh);
-	seq_printf(seq, "auto_io=%u\n", brd->auto_io);
-	seq_printf(seq, "need_io=%u\n", brd->need_io);
-
-	show_max(seq, &brd->max);
-
-
-	return 0;
-}
-
-static int fops_board_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, board_show, NULL);
-}
-
-static const struct file_operations fops_board = {
-	.open		= fops_board_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.owner		= THIS_MODULE,
-};
-
-static int info_show(struct seq_file *seq, void *p)
-{
-	struct s3c_cpufreq_config *cfg;
-
-	cfg = s3c_cpufreq_getconfig();
-	if (!cfg) {
-		seq_printf(seq, "no configuration registered\n");
-		return 0;
-	}
-
-	seq_printf(seq, "  FCLK %ld Hz\n", cfg->freq.fclk);
-	seq_printf(seq, "  HCLK %ld Hz (%lu.%lu ns)\n",
-		   cfg->freq.hclk, print_ns(cfg->freq.hclk_tns));
-	seq_printf(seq, "  PCLK %ld Hz\n", cfg->freq.hclk);
-	seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk);
-	seq_printf(seq, "\n");
-
-	show_max(seq, &cfg->max);
-
-	seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n",
-		   cfg->divs.h_divisor, cfg->divs.p_divisor,
-		   cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off");
-	seq_printf(seq, "\n");
-
-	seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll);
-
-	return 0;
-}
-
-static int fops_info_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, info_show, NULL);
-}
-
-static const struct file_operations fops_info = {
-	.open		= fops_info_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.owner		= THIS_MODULE,
-};
-
-static int io_show(struct seq_file *seq, void *p)
-{
-	void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *);
-	struct s3c_cpufreq_config *cfg;
-	struct s3c_iotimings *iot;
-	union s3c_iobank *iob;
-	int bank;
-
-	cfg = s3c_cpufreq_getconfig();
-	if (!cfg) {
-		seq_printf(seq, "no configuration registered\n");
-		return 0;
-	}
-
-	show_bank = cfg->info->debug_io_show;
-	if (!show_bank) {
-		seq_printf(seq, "no code to show bank timing\n");
-		return 0;
-	}
-
-	iot = s3c_cpufreq_getiotimings();
-	if (!iot) {
-		seq_printf(seq, "no io timings registered\n");
-		return 0;
-	}
-
-	seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns));
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		iob = &iot->bank[bank];
-
-		seq_printf(seq, "bank %d: ", bank);
-
-		if (!iob->io_2410) {
-			seq_printf(seq, "nothing set\n");
-			continue;
-		}
-
-		show_bank(seq, cfg, iob);
-	}
-
-	return 0;
-}
-
-static int fops_io_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, io_show, NULL);
-}
-
-static const struct file_operations fops_io = {
-	.open		= fops_io_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.owner		= THIS_MODULE,
-};
-
-
-static int __init s3c_freq_debugfs_init(void)
-{
-	dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL);
-	if (IS_ERR(dbgfs_root)) {
-		printk(KERN_ERR "%s: error creating debugfs root\n", __func__);
-		return PTR_ERR(dbgfs_root);
-	}
-
-	dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root,
-					    NULL, &fops_io);
-
-	dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root,
-					      NULL, &fops_info);
-
-	dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root,
-					       NULL, &fops_board);
-
-	return 0;
-}
-
-late_initcall(s3c_freq_debugfs_init);
-
diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
deleted file mode 100644
index cfa0dd8..0000000
--- a/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * Copyright (c) 2006-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 CPU Frequency scaling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/cpu-freq-core.h>
-
-/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
-
-static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
-{
-	u32 clkdiv = 0;
-
-	if (cfg->divs.h_divisor == 2)
-		clkdiv |= S3C2410_CLKDIVN_HDIVN;
-
-	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
-		clkdiv |= S3C2410_CLKDIVN_PDIVN;
-
-	__raw_writel(clkdiv, S3C2410_CLKDIVN);
-}
-
-static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
-{
-	unsigned long hclk, fclk, pclk;
-	unsigned int hdiv, pdiv;
-	unsigned long hclk_max;
-
-	fclk = cfg->freq.fclk;
-	hclk_max = cfg->max.hclk;
-
-	cfg->freq.armclk = fclk;
-
-	s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n",
-		      __func__, fclk, hclk_max);
-
-	hdiv = (fclk > cfg->max.hclk) ? 2 : 1;
-	hclk = fclk / hdiv;
-
-	if (hclk > cfg->max.hclk) {
-		s3c_freq_dbg("%s: hclk too big\n", __func__);
-		return -EINVAL;
-	}
-
-	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
-	pclk = hclk / pdiv;
-
-	if (pclk > cfg->max.pclk) {
-		s3c_freq_dbg("%s: pclk too big\n", __func__);
-		return -EINVAL;
-	}
-
-	pdiv *= hdiv;
-
-	/* record the result */
-	cfg->divs.p_divisor = pdiv;
-	cfg->divs.h_divisor = hdiv;
-
-	return 0;
-}
-
-static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
-	.max		= {
-		.fclk	= 200000000,
-		.hclk	= 100000000,
-		.pclk	=  50000000,
-	},
-
-	/* transition latency is about 5ms worst-case, so
-	 * set 10ms to be sure */
-	.latency	= 10000000,
-
-	.locktime_m	= 150,
-	.locktime_u	= 150,
-	.locktime_bits	= 12,
-
-	.need_pll	= 1,
-
-	.name		= "s3c2410",
-	.calc_iotiming	= s3c2410_iotiming_calc,
-	.set_iotiming	= s3c2410_iotiming_set,
-	.get_iotiming	= s3c2410_iotiming_get,
-	.resume_clocks	= s3c2410_setup_clocks,
-
-	.set_fvco	= s3c2410_set_fvco,
-	.set_refresh	= s3c2410_cpufreq_setrefresh,
-	.set_divs	= s3c2410_cpufreq_setdivs,
-	.calc_divs	= s3c2410_cpufreq_calcdivs,
-
-	.debug_io_show	= s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
-};
-
-static int s3c2410_cpufreq_add(struct device *dev,
-			       struct subsys_interface *sif)
-{
-	return s3c_cpufreq_register(&s3c2410_cpufreq_info);
-}
-
-static struct subsys_interface s3c2410_cpufreq_interface = {
-	.name		= "s3c2410_cpufreq",
-	.subsys		= &s3c2410_subsys,
-	.add_dev	= s3c2410_cpufreq_add,
-};
-
-static int __init s3c2410_cpufreq_init(void)
-{
-	return subsys_interface_register(&s3c2410_cpufreq_interface);
-}
-arch_initcall(s3c2410_cpufreq_init);
-
-static int s3c2410a_cpufreq_add(struct device *dev,
-				struct subsys_interface *sif)
-{
-	/* alter the maximum freq settings for S3C2410A. If a board knows
-	 * it only has a maximum of 200, then it should register its own
-	 * limits. */
-
-	s3c2410_cpufreq_info.max.fclk = 266000000;
-	s3c2410_cpufreq_info.max.hclk = 133000000;
-	s3c2410_cpufreq_info.max.pclk =  66500000;
-	s3c2410_cpufreq_info.name = "s3c2410a";
-
-	return s3c2410_cpufreq_add(dev, sif);
-}
-
-static struct subsys_interface s3c2410a_cpufreq_interface = {
-	.name		= "s3c2410a_cpufreq",
-	.subsys		= &s3c2410a_subsys,
-	.add_dev	= s3c2410a_cpufreq_add,
-};
-
-static int __init s3c2410a_cpufreq_init(void)
-{
-	return subsys_interface_register(&s3c2410a_cpufreq_interface);
-}
-arch_initcall(s3c2410a_cpufreq_init);
diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
deleted file mode 100644
index 8bf0f3a..0000000
--- a/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2412 CPU Frequency scalling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/cpu-freq-core.h>
-
-#include "s3c2412.h"
-
-/* our clock resources. */
-static struct clk *xtal;
-static struct clk *fclk;
-static struct clk *hclk;
-static struct clk *armclk;
-
-/* HDIV: 1, 2, 3, 4, 6, 8 */
-
-static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
-{
-	unsigned int hdiv, pdiv, armdiv, dvs;
-	unsigned long hclk, fclk, armclk, armdiv_clk;
-	unsigned long hclk_max;
-
-	fclk = cfg->freq.fclk;
-	armclk = cfg->freq.armclk;
-	hclk_max = cfg->max.hclk;
-
-	/* We can't run hclk above armclk as at the best we have to
-	 * have armclk and hclk in dvs mode. */
-
-	if (hclk_max > armclk)
-		hclk_max = armclk;
-
-	s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n",
-		     __func__, fclk, armclk, hclk_max);
-	s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n",
-		     __func__, cfg->freq.fclk, cfg->freq.armclk,
-		     cfg->freq.hclk, cfg->freq.pclk);
-
-	armdiv = fclk / armclk;
-
-	if (armdiv < 1)
-		armdiv = 1;
-	if (armdiv > 2)
-		armdiv = 2;
-
-	cfg->divs.arm_divisor = armdiv;
-	armdiv_clk = fclk / armdiv;
-
-	hdiv = armdiv_clk / hclk_max;
-	if (hdiv < 1)
-		hdiv = 1;
-
-	cfg->freq.hclk = hclk = armdiv_clk / hdiv;
-
-	/* set dvs depending on whether we reached armclk or not. */
-	cfg->divs.dvs = dvs = armclk < armdiv_clk;
-
-	/* update the actual armclk we achieved. */
-	cfg->freq.armclk = dvs ? hclk : armdiv_clk;
-
-	s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n",
-		     __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs);
-
-	if (hdiv > 4)
-		goto invalid;
-
-	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
-
-	if ((hclk / pdiv) > cfg->max.pclk)
-		pdiv++;
-
-	cfg->freq.pclk = hclk / pdiv;
-
-	s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
-
-	if (pdiv > 2)
-		goto invalid;
-
-	pdiv *= hdiv;
-
-	/* store the result, and then return */
-
-	cfg->divs.h_divisor = hdiv * armdiv;
-	cfg->divs.p_divisor = pdiv * armdiv;
-
-	return 0;
-
-invalid:
-	return -EINVAL;
-}
-
-static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
-{
-	unsigned long clkdiv;
-	unsigned long olddiv;
-
-	olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
-
-	/* clear off current clock info */
-
-	clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN;
-	clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK;
-	clkdiv &= ~S3C2412_CLKDIVN_PDIVN;
-
-	if (cfg->divs.arm_divisor == 2)
-		clkdiv |= S3C2412_CLKDIVN_ARMDIVN;
-
-	clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1);
-
-	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
-		clkdiv |= S3C2412_CLKDIVN_PDIVN;
-
-	s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
-	__raw_writel(clkdiv, S3C2410_CLKDIVN);
-
-	clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
-}
-
-static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
-{
-	struct s3c_cpufreq_board *board = cfg->board;
-	unsigned long refresh;
-
-	s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
-		     board->refresh, cfg->freq.hclk);
-
-	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
-	 * by 10 each to ensure that we do not overflow 32 bit numbers. This
-	 * should work for HCLK up to 133MHz and refresh period up to 30usec.
-	 */
-
-	refresh = (board->refresh / 10);
-	refresh *= (cfg->freq.hclk / 100);
-	refresh /= (1 * 1000 * 1000);	/* 10^6 */
-
-	s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
-	__raw_writel(refresh, S3C2412_REFRESH);
-}
-
-/* set the default cpu frequency information, based on an 200MHz part
- * as we have no other way of detecting the speed rating in software.
- */
-
-static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
-	.max		= {
-		.fclk	= 200000000,
-		.hclk	= 100000000,
-		.pclk	=  50000000,
-	},
-
-	.latency	= 5000000, /* 5ms */
-
-	.locktime_m	= 150,
-	.locktime_u	= 150,
-	.locktime_bits	= 16,
-
-	.name		= "s3c2412",
-	.set_refresh	= s3c2412_cpufreq_setrefresh,
-	.set_divs	= s3c2412_cpufreq_setdivs,
-	.calc_divs	= s3c2412_cpufreq_calcdivs,
-
-	.calc_iotiming	= s3c2412_iotiming_calc,
-	.set_iotiming	= s3c2412_iotiming_set,
-	.get_iotiming	= s3c2412_iotiming_get,
-
-	.resume_clocks	= s3c2412_setup_clocks,
-
-	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
-};
-
-static int s3c2412_cpufreq_add(struct device *dev,
-			       struct subsys_interface *sif)
-{
-	unsigned long fclk_rate;
-
-	hclk = clk_get(NULL, "hclk");
-	if (IS_ERR(hclk)) {
-		printk(KERN_ERR "%s: cannot find hclk clock\n", __func__);
-		return -ENOENT;
-	}
-
-	fclk = clk_get(NULL, "fclk");
-	if (IS_ERR(fclk)) {
-		printk(KERN_ERR "%s: cannot find fclk clock\n", __func__);
-		goto err_fclk;
-	}
-
-	fclk_rate = clk_get_rate(fclk);
-	if (fclk_rate > 200000000) {
-		printk(KERN_INFO
-		       "%s: fclk %ld MHz, assuming 266MHz capable part\n",
-		       __func__, fclk_rate / 1000000);
-		s3c2412_cpufreq_info.max.fclk = 266000000;
-		s3c2412_cpufreq_info.max.hclk = 133000000;
-		s3c2412_cpufreq_info.max.pclk =  66000000;
-	}
-
-	armclk = clk_get(NULL, "armclk");
-	if (IS_ERR(armclk)) {
-		printk(KERN_ERR "%s: cannot find arm clock\n", __func__);
-		goto err_armclk;
-	}
-
-	xtal = clk_get(NULL, "xtal");
-	if (IS_ERR(xtal)) {
-		printk(KERN_ERR "%s: cannot find xtal clock\n", __func__);
-		goto err_xtal;
-	}
-
-	return s3c_cpufreq_register(&s3c2412_cpufreq_info);
-
-err_xtal:
-	clk_put(armclk);
-err_armclk:
-	clk_put(fclk);
-err_fclk:
-	clk_put(hclk);
-
-	return -ENOENT;
-}
-
-static struct subsys_interface s3c2412_cpufreq_interface = {
-	.name		= "s3c2412_cpufreq",
-	.subsys		= &s3c2412_subsys,
-	.add_dev	= s3c2412_cpufreq_add,
-};
-
-static int s3c2412_cpufreq_init(void)
-{
-	return subsys_interface_register(&s3c2412_cpufreq_interface);
-}
-arch_initcall(s3c2412_cpufreq_init);
diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
deleted file mode 100644
index 72b2cc8..0000000
--- a/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
+++ /dev/null
@@ -1,312 +0,0 @@
-/*
- * Copyright (c) 2006-2009 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *	Vincent Sanders <vince@simtec.co.uk>
- *
- * S3C2440/S3C2442 CPU Frequency scaling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
-#include <plat/clock.h>
-
-static struct clk *xtal;
-static struct clk *fclk;
-static struct clk *hclk;
-static struct clk *armclk;
-
-/* HDIV: 1, 2, 3, 4, 6, 8 */
-
-static inline int within_khz(unsigned long a, unsigned long b)
-{
-	long diff = a - b;
-
-	return (diff >= -1000 && diff <= 1000);
-}
-
-/**
- * s3c2440_cpufreq_calcdivs - calculate divider settings
- * @cfg: The cpu frequency settings.
- *
- * Calcualte the divider values for the given frequency settings
- * specified in @cfg. The values are stored in @cfg for later use
- * by the relevant set routine if the request settings can be reached.
- */
-int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
-{
-	unsigned int hdiv, pdiv;
-	unsigned long hclk, fclk, armclk;
-	unsigned long hclk_max;
-
-	fclk = cfg->freq.fclk;
-	armclk = cfg->freq.armclk;
-	hclk_max = cfg->max.hclk;
-
-	s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n",
-		     __func__, fclk, armclk, hclk_max);
-
-	if (armclk > fclk) {
-		printk(KERN_WARNING "%s: armclk > fclk\n", __func__);
-		armclk = fclk;
-	}
-
-	/* if we are in DVS, we need HCLK to be <= ARMCLK */
-	if (armclk < fclk && armclk < hclk_max)
-		hclk_max = armclk;
-
-	for (hdiv = 1; hdiv < 9; hdiv++) {
-		if (hdiv == 5 || hdiv == 7)
-			hdiv++;
-
-		hclk = (fclk / hdiv);
-		if (hclk <= hclk_max || within_khz(hclk, hclk_max))
-			break;
-	}
-
-	s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv);
-
-	if (hdiv > 8)
-		goto invalid;
-
-	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
-
-	if ((hclk / pdiv) > cfg->max.pclk)
-		pdiv++;
-
-	s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
-
-	if (pdiv > 2)
-		goto invalid;
-
-	pdiv *= hdiv;
-
-	/* calculate a valid armclk */
-
-	if (armclk < hclk)
-		armclk = hclk;
-
-	/* if we're running armclk lower than fclk, this really means
-	 * that the system should go into dvs mode, which means that
-	 * armclk is connected to hclk. */
-	if (armclk < fclk) {
-		cfg->divs.dvs = 1;
-		armclk = hclk;
-	} else
-		cfg->divs.dvs = 0;
-
-	cfg->freq.armclk = armclk;
-
-	/* store the result, and then return */
-
-	cfg->divs.h_divisor = hdiv;
-	cfg->divs.p_divisor = pdiv;
-
-	return 0;
-
- invalid:
-	return -EINVAL;
-}
-
-#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \
-			   S3C2440_CAMDIVN_HCLK4_HALF)
-
-/**
- * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings
- * @cfg: The cpu frequency settings.
- *
- * Set the divisors from the settings in @cfg, which where generated
- * during the calculation phase by s3c2440_cpufreq_calcdivs().
- */
-static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
-{
-	unsigned long clkdiv, camdiv;
-
-	s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
-		     cfg->divs.h_divisor, cfg->divs.p_divisor);
-
-	clkdiv = __raw_readl(S3C2410_CLKDIVN);
-	camdiv = __raw_readl(S3C2440_CAMDIVN);
-
-	clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
-	camdiv &= ~CAMDIVN_HCLK_HALF;
-
-	switch (cfg->divs.h_divisor) {
-	case 1:
-		clkdiv |= S3C2440_CLKDIVN_HDIVN_1;
-		break;
-
-	case 2:
-		clkdiv |= S3C2440_CLKDIVN_HDIVN_2;
-		break;
-
-	case 6:
-		camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
-	case 3:
-		clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6;
-		break;
-
-	case 8:
-		camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
-	case 4:
-		clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8;
-		break;
-
-	default:
-		BUG();	/* we don't expect to get here. */
-	}
-
-	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
-		clkdiv |= S3C2440_CLKDIVN_PDIVN;
-
-	/* todo - set pclk. */
-
-	/* Write the divisors first with hclk intentionally halved so that
-	 * when we write clkdiv we will under-frequency instead of over. We
-	 * then make a short delay and remove the hclk halving if necessary.
-	 */
-
-	__raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
-	__raw_writel(clkdiv, S3C2410_CLKDIVN);
-
-	ndelay(20);
-	__raw_writel(camdiv, S3C2440_CAMDIVN);
-
-	clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
-}
-
-static int run_freq_for(unsigned long max_hclk, unsigned long fclk,
-			int *divs,
-			struct cpufreq_frequency_table *table,
-			size_t table_size)
-{
-	unsigned long freq;
-	int index = 0;
-	int div;
-
-	for (div = *divs; div > 0; div = *divs++) {
-		freq = fclk / div;
-
-		if (freq > max_hclk && div != 1)
-			continue;
-
-		freq /= 1000; /* table is in kHz */
-		index = s3c_cpufreq_addfreq(table, index, table_size, freq);
-		if (index < 0)
-			break;
-	}
-
-	return index;
-}
-
-static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 };
-
-static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
-				     struct cpufreq_frequency_table *table,
-				     size_t table_size)
-{
-	int ret;
-
-	WARN_ON(cfg->info == NULL);
-	WARN_ON(cfg->board == NULL);
-
-	ret = run_freq_for(cfg->info->max.hclk,
-			   cfg->info->max.fclk,
-			   hclk_divs,
-			   table, table_size);
-
-	s3c_freq_dbg("%s: returning %d\n", __func__, ret);
-
-	return ret;
-}
-
-struct s3c_cpufreq_info s3c2440_cpufreq_info = {
-	.max		= {
-		.fclk	= 400000000,
-		.hclk	= 133333333,
-		.pclk	=  66666666,
-	},
-
-	.locktime_m	= 300,
-	.locktime_u	= 300,
-	.locktime_bits	= 16,
-
-	.name		= "s3c244x",
-	.calc_iotiming	= s3c2410_iotiming_calc,
-	.set_iotiming	= s3c2410_iotiming_set,
-	.get_iotiming	= s3c2410_iotiming_get,
-	.set_fvco	= s3c2410_set_fvco,
-
-	.set_refresh	= s3c2410_cpufreq_setrefresh,
-	.set_divs	= s3c2440_cpufreq_setdivs,
-	.calc_divs	= s3c2440_cpufreq_calcdivs,
-	.calc_freqtable	= s3c2440_cpufreq_calctable,
-
-	.resume_clocks	= s3c244x_setup_clocks,
-
-	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
-};
-
-static int s3c2440_cpufreq_add(struct device *dev,
-			       struct subsys_interface *sif)
-{
-	xtal = s3c_cpufreq_clk_get(NULL, "xtal");
-	hclk = s3c_cpufreq_clk_get(NULL, "hclk");
-	fclk = s3c_cpufreq_clk_get(NULL, "fclk");
-	armclk = s3c_cpufreq_clk_get(NULL, "armclk");
-
-	if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
-		printk(KERN_ERR "%s: failed to get clocks\n", __func__);
-		return -ENOENT;
-	}
-
-	return s3c_cpufreq_register(&s3c2440_cpufreq_info);
-}
-
-static struct subsys_interface s3c2440_cpufreq_interface = {
-	.name		= "s3c2440_cpufreq",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2440_cpufreq_add,
-};
-
-static int s3c2440_cpufreq_init(void)
-{
-	return subsys_interface_register(&s3c2440_cpufreq_interface);
-}
-
-/* arch_initcall adds the clocks we need, so use subsys_initcall. */
-subsys_initcall(s3c2440_cpufreq_init);
-
-static struct subsys_interface s3c2442_cpufreq_interface = {
-	.name		= "s3c2442_cpufreq",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c2440_cpufreq_add,
-};
-
-static int s3c2442_cpufreq_init(void)
-{
-	return subsys_interface_register(&s3c2442_cpufreq_interface);
-}
-subsys_initcall(s3c2442_cpufreq_init);
diff --git a/arch/arm/mach-s3c24xx/cpufreq.c b/arch/arm/mach-s3c24xx/cpufreq.c
deleted file mode 100644
index 3c0e78e..0000000
--- a/arch/arm/mach-s3c24xx/cpufreq.c
+++ /dev/null
@@ -1,711 +0,0 @@
-/*
- * Copyright (c) 2006-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX CPU Frequency scaling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/cpu.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/sysfs.h>
-#include <linux/slab.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/cpu-freq-core.h>
-
-#include <mach/regs-clock.h>
-
-/* note, cpufreq support deals in kHz, no Hz */
-
-static struct cpufreq_driver s3c24xx_driver;
-static struct s3c_cpufreq_config cpu_cur;
-static struct s3c_iotimings s3c24xx_iotiming;
-static struct cpufreq_frequency_table *pll_reg;
-static unsigned int last_target = ~0;
-static unsigned int ftab_size;
-static struct cpufreq_frequency_table *ftab;
-
-static struct clk *_clk_mpll;
-static struct clk *_clk_xtal;
-static struct clk *clk_fclk;
-static struct clk *clk_hclk;
-static struct clk *clk_pclk;
-static struct clk *clk_arm;
-
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
-struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void)
-{
-	return &cpu_cur;
-}
-
-struct s3c_iotimings *s3c_cpufreq_getiotimings(void)
-{
-	return &s3c24xx_iotiming;
-}
-#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */
-
-static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
-{
-	unsigned long fclk, pclk, hclk, armclk;
-
-	cfg->freq.fclk = fclk = clk_get_rate(clk_fclk);
-	cfg->freq.hclk = hclk = clk_get_rate(clk_hclk);
-	cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
-	cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
-
-	cfg->pll.index = __raw_readl(S3C2410_MPLLCON);
-	cfg->pll.frequency = fclk;
-
-	cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
-
-	cfg->divs.h_divisor = fclk / hclk;
-	cfg->divs.p_divisor = fclk / pclk;
-}
-
-static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg)
-{
-	unsigned long pll = cfg->pll.frequency;
-
-	cfg->freq.fclk = pll;
-	cfg->freq.hclk = pll / cfg->divs.h_divisor;
-	cfg->freq.pclk = pll / cfg->divs.p_divisor;
-
-	/* convert hclk into 10ths of nanoseconds for io calcs */
-	cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
-}
-
-static inline int closer(unsigned int target, unsigned int n, unsigned int c)
-{
-	int diff_cur = abs(target - c);
-	int diff_new = abs(target - n);
-
-	return (diff_new < diff_cur);
-}
-
-static void s3c_cpufreq_show(const char *pfx,
-				 struct s3c_cpufreq_config *cfg)
-{
-	s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n",
-		     pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk,
-		     cfg->freq.hclk, cfg->divs.h_divisor,
-		     cfg->freq.pclk, cfg->divs.p_divisor);
-}
-
-/* functions to wrapper the driver info calls to do the cpu specific work */
-
-static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg)
-{
-	if (cfg->info->set_iotiming)
-		(cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming);
-}
-
-static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg)
-{
-	if (cfg->info->calc_iotiming)
-		return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming);
-
-	return 0;
-}
-
-static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
-{
-	(cfg->info->set_refresh)(cfg);
-}
-
-static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
-{
-	(cfg->info->set_divs)(cfg);
-}
-
-static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
-{
-	return (cfg->info->calc_divs)(cfg);
-}
-
-static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
-{
-	(cfg->info->set_fvco)(cfg);
-}
-
-static inline void s3c_cpufreq_resume_clocks(void)
-{
-	cpu_cur.info->resume_clocks();
-}
-
-static inline void s3c_cpufreq_updateclk(struct clk *clk,
-					 unsigned int freq)
-{
-	clk_set_rate(clk, freq);
-}
-
-static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
-				 unsigned int target_freq,
-				 struct cpufreq_frequency_table *pll)
-{
-	struct s3c_cpufreq_freqs freqs;
-	struct s3c_cpufreq_config cpu_new;
-	unsigned long flags;
-
-	cpu_new = cpu_cur;  /* copy new from current */
-
-	s3c_cpufreq_show("cur", &cpu_cur);
-
-	/* TODO - check for DMA currently outstanding */
-
-	cpu_new.pll = pll ? *pll : cpu_cur.pll;
-
-	if (pll)
-		freqs.pll_changing = 1;
-
-	/* update our frequencies */
-
-	cpu_new.freq.armclk = target_freq;
-	cpu_new.freq.fclk = cpu_new.pll.frequency;
-
-	if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
-		printk(KERN_ERR "no divisors for %d\n", target_freq);
-		goto err_notpossible;
-	}
-
-	s3c_freq_dbg("%s: got divs\n", __func__);
-
-	s3c_cpufreq_calc(&cpu_new);
-
-	s3c_freq_dbg("%s: calculated frequencies for new\n", __func__);
-
-	if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
-		if (s3c_cpufreq_calcio(&cpu_new) < 0) {
-			printk(KERN_ERR "%s: no IO timings\n", __func__);
-			goto err_notpossible;
-		}
-	}
-
-	s3c_cpufreq_show("new", &cpu_new);
-
-	/* setup our cpufreq parameters */
-
-	freqs.old = cpu_cur.freq;
-	freqs.new = cpu_new.freq;
-
-	freqs.freqs.old = cpu_cur.freq.armclk / 1000;
-	freqs.freqs.new = cpu_new.freq.armclk / 1000;
-
-	/* update f/h/p clock settings before we issue the change
-	 * notification, so that drivers do not need to do anything
-	 * special if they want to recalculate on CPUFREQ_PRECHANGE. */
-
-	s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency);
-	s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk);
-	s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk);
-	s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
-
-	/* start the frequency change */
-	cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_PRECHANGE);
-
-	/* If hclk is staying the same, then we do not need to
-	 * re-write the IO or the refresh timings whilst we are changing
-	 * speed. */
-
-	local_irq_save(flags);
-
-	/* is our memory clock slowing down? */
-	if (cpu_new.freq.hclk < cpu_cur.freq.hclk) {
-		s3c_cpufreq_setrefresh(&cpu_new);
-		s3c_cpufreq_setio(&cpu_new);
-	}
-
-	if (cpu_new.freq.fclk == cpu_cur.freq.fclk) {
-		/* not changing PLL, just set the divisors */
-
-		s3c_cpufreq_setdivs(&cpu_new);
-	} else {
-		if (cpu_new.freq.fclk < cpu_cur.freq.fclk) {
-			/* slow the cpu down, then set divisors */
-
-			s3c_cpufreq_setfvco(&cpu_new);
-			s3c_cpufreq_setdivs(&cpu_new);
-		} else {
-			/* set the divisors, then speed up */
-
-			s3c_cpufreq_setdivs(&cpu_new);
-			s3c_cpufreq_setfvco(&cpu_new);
-		}
-	}
-
-	/* did our memory clock speed up */
-	if (cpu_new.freq.hclk > cpu_cur.freq.hclk) {
-		s3c_cpufreq_setrefresh(&cpu_new);
-		s3c_cpufreq_setio(&cpu_new);
-	}
-
-	/* update our current settings */
-	cpu_cur = cpu_new;
-
-	local_irq_restore(flags);
-
-	/* notify everyone we've done this */
-	cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_POSTCHANGE);
-
-	s3c_freq_dbg("%s: finished\n", __func__);
-	return 0;
-
- err_notpossible:
-	printk(KERN_ERR "no compatible settings for %d\n", target_freq);
-	return -EINVAL;
-}
-
-/* s3c_cpufreq_target
- *
- * called by the cpufreq core to adjust the frequency that the CPU
- * is currently running at.
- */
-
-static int s3c_cpufreq_target(struct cpufreq_policy *policy,
-			      unsigned int target_freq,
-			      unsigned int relation)
-{
-	struct cpufreq_frequency_table *pll;
-	unsigned int index;
-
-	/* avoid repeated calls which cause a needless amout of duplicated
-	 * logging output (and CPU time as the calculation process is
-	 * done) */
-	if (target_freq == last_target)
-		return 0;
-
-	last_target = target_freq;
-
-	s3c_freq_dbg("%s: policy %p, target %u, relation %u\n",
-		     __func__, policy, target_freq, relation);
-
-	if (ftab) {
-		if (cpufreq_frequency_table_target(policy, ftab,
-						   target_freq, relation,
-						   &index)) {
-			s3c_freq_dbg("%s: table failed\n", __func__);
-			return -EINVAL;
-		}
-
-		s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__,
-			     target_freq, index, ftab[index].frequency);
-		target_freq = ftab[index].frequency;
-	}
-
-	target_freq *= 1000;  /* convert target to Hz */
-
-	/* find the settings for our new frequency */
-
-	if (!pll_reg || cpu_cur.lock_pll) {
-		/* either we've not got any PLL values, or we've locked
-		 * to the current one. */
-		pll = NULL;
-	} else {
-		struct cpufreq_policy tmp_policy;
-		int ret;
-
-		/* we keep the cpu pll table in Hz, to ensure we get an
-		 * accurate value for the PLL output. */
-
-		tmp_policy.min = policy->min * 1000;
-		tmp_policy.max = policy->max * 1000;
-		tmp_policy.cpu = policy->cpu;
-
-		/* cpufreq_frequency_table_target uses a pointer to 'index'
-		 * which is the number of the table entry, not the value of
-		 * the table entry's index field. */
-
-		ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg,
-						     target_freq, relation,
-						     &index);
-
-		if (ret < 0) {
-			printk(KERN_ERR "%s: no PLL available\n", __func__);
-			goto err_notpossible;
-		}
-
-		pll = pll_reg + index;
-
-		s3c_freq_dbg("%s: target %u => %u\n",
-			     __func__, target_freq, pll->frequency);
-
-		target_freq = pll->frequency;
-	}
-
-	return s3c_cpufreq_settarget(policy, target_freq, pll);
-
- err_notpossible:
-	printk(KERN_ERR "no compatible settings for %d\n", target_freq);
-	return -EINVAL;
-}
-
-static unsigned int s3c_cpufreq_get(unsigned int cpu)
-{
-	return clk_get_rate(clk_arm) / 1000;
-}
-
-struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
-{
-	struct clk *clk;
-
-	clk = clk_get(dev, name);
-	if (IS_ERR(clk))
-		printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
-
-	return clk;
-}
-
-static int s3c_cpufreq_init(struct cpufreq_policy *policy)
-{
-	printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy);
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	policy->cur = s3c_cpufreq_get(0);
-	policy->min = policy->cpuinfo.min_freq = 0;
-	policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000;
-	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-
-	/* feed the latency information from the cpu driver */
-	policy->cpuinfo.transition_latency = cpu_cur.info->latency;
-
-	if (ftab)
-		cpufreq_frequency_table_cpuinfo(policy, ftab);
-
-	return 0;
-}
-
-static __init int s3c_cpufreq_initclks(void)
-{
-	_clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll");
-	_clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal");
-	clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk");
-	clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk");
-	clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk");
-	clk_arm = s3c_cpufreq_clk_get(NULL, "armclk");
-
-	if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
-	    IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
-		printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
-		return -ENOENT;
-	}
-
-	printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
-	       clk_get_rate(clk_fclk) / 1000,
-	       clk_get_rate(clk_hclk) / 1000,
-	       clk_get_rate(clk_pclk) / 1000,
-	       clk_get_rate(clk_arm) / 1000);
-
-	return 0;
-}
-
-static int s3c_cpufreq_verify(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static struct cpufreq_frequency_table suspend_pll;
-static unsigned int suspend_freq;
-
-static int s3c_cpufreq_suspend(struct cpufreq_policy *policy)
-{
-	suspend_pll.frequency = clk_get_rate(_clk_mpll);
-	suspend_pll.index = __raw_readl(S3C2410_MPLLCON);
-	suspend_freq = s3c_cpufreq_get(0) * 1000;
-
-	return 0;
-}
-
-static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
-{
-	int ret;
-
-	s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy);
-
-	last_target = ~0;	/* invalidate last_target setting */
-
-	/* first, find out what speed we resumed at. */
-	s3c_cpufreq_resume_clocks();
-
-	/* whilst we will be called later on, we try and re-set the
-	 * cpu frequencies as soon as possible so that we do not end
-	 * up resuming devices and then immediately having to re-set
-	 * a number of settings once these devices have restarted.
-	 *
-	 * as a note, it is expected devices are not used until they
-	 * have been un-suspended and at that time they should have
-	 * used the updated clock settings.
-	 */
-
-	ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
-	if (ret) {
-		printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
-		return ret;
-	}
-
-	return 0;
-}
-#else
-#define s3c_cpufreq_resume NULL
-#define s3c_cpufreq_suspend NULL
-#endif
-
-static struct cpufreq_driver s3c24xx_driver = {
-	.flags		= CPUFREQ_STICKY,
-	.verify		= s3c_cpufreq_verify,
-	.target		= s3c_cpufreq_target,
-	.get		= s3c_cpufreq_get,
-	.init		= s3c_cpufreq_init,
-	.suspend	= s3c_cpufreq_suspend,
-	.resume		= s3c_cpufreq_resume,
-	.name		= "s3c24xx",
-};
-
-
-int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info)
-{
-	if (!info || !info->name) {
-		printk(KERN_ERR "%s: failed to pass valid information\n",
-		       __func__);
-		return -EINVAL;
-	}
-
-	printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
-	       info->name);
-
-	/* check our driver info has valid data */
-
-	BUG_ON(info->set_refresh == NULL);
-	BUG_ON(info->set_divs == NULL);
-	BUG_ON(info->calc_divs == NULL);
-
-	/* info->set_fvco is optional, depending on whether there
-	 * is a need to set the clock code. */
-
-	cpu_cur.info = info;
-
-	/* Note, driver registering should probably update locktime */
-
-	return 0;
-}
-
-int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
-{
-	struct s3c_cpufreq_board *ours;
-
-	if (!board) {
-		printk(KERN_INFO "%s: no board data\n", __func__);
-		return -EINVAL;
-	}
-
-	/* Copy the board information so that each board can make this
-	 * initdata. */
-
-	ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL);
-	if (ours == NULL) {
-		printk(KERN_ERR "%s: no memory\n", __func__);
-		return -ENOMEM;
-	}
-
-	*ours = *board;
-	cpu_cur.board = ours;
-
-	return 0;
-}
-
-int __init s3c_cpufreq_auto_io(void)
-{
-	int ret;
-
-	if (!cpu_cur.info->get_iotiming) {
-		printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
-		return -ENOENT;
-	}
-
-	printk(KERN_INFO "%s: working out IO settings\n", __func__);
-
-	ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
-	if (ret)
-		printk(KERN_ERR "%s: failed to get timings\n", __func__);
-
-	return ret;
-}
-
-/* if one or is zero, then return the other, otherwise return the min */
-#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b))
-
-/**
- * s3c_cpufreq_freq_min - find the minimum settings for the given freq.
- * @dst: The destination structure
- * @a: One argument.
- * @b: The other argument.
- *
- * Create a minimum of each frequency entry in the 'struct s3c_freq',
- * unless the entry is zero when it is ignored and the non-zero argument
- * used.
- */
-static void s3c_cpufreq_freq_min(struct s3c_freq *dst,
-				 struct s3c_freq *a, struct s3c_freq *b)
-{
-	dst->fclk = do_min(a->fclk, b->fclk);
-	dst->hclk = do_min(a->hclk, b->hclk);
-	dst->pclk = do_min(a->pclk, b->pclk);
-	dst->armclk = do_min(a->armclk, b->armclk);
-}
-
-static inline u32 calc_locktime(u32 freq, u32 time_us)
-{
-	u32 result;
-
-	result = freq * time_us;
-	result = DIV_ROUND_UP(result, 1000 * 1000);
-
-	return result;
-}
-
-static void s3c_cpufreq_update_loctkime(void)
-{
-	unsigned int bits = cpu_cur.info->locktime_bits;
-	u32 rate = (u32)clk_get_rate(_clk_xtal);
-	u32 val;
-
-	if (bits == 0) {
-		WARN_ON(1);
-		return;
-	}
-
-	val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
-	val |= calc_locktime(rate, cpu_cur.info->locktime_m);
-
-	printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
-	__raw_writel(val, S3C2410_LOCKTIME);
-}
-
-static int s3c_cpufreq_build_freq(void)
-{
-	int size, ret;
-
-	if (!cpu_cur.info->calc_freqtable)
-		return -EINVAL;
-
-	kfree(ftab);
-	ftab = NULL;
-
-	size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
-	size++;
-
-	ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL);
-	if (!ftab) {
-		printk(KERN_ERR "%s: no memory for tables\n", __func__);
-		return -ENOMEM;
-	}
-
-	ftab_size = size;
-
-	ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size);
-	s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END);
-
-	return 0;
-}
-
-static int __init s3c_cpufreq_initcall(void)
-{
-	int ret = 0;
-
-	if (cpu_cur.info && cpu_cur.board) {
-		ret = s3c_cpufreq_initclks();
-		if (ret)
-			goto out;
-
-		/* get current settings */
-		s3c_cpufreq_getcur(&cpu_cur);
-		s3c_cpufreq_show("cur", &cpu_cur);
-
-		if (cpu_cur.board->auto_io) {
-			ret = s3c_cpufreq_auto_io();
-			if (ret) {
-				printk(KERN_ERR "%s: failed to get io timing\n",
-				       __func__);
-				goto out;
-			}
-		}
-
-		if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
-			printk(KERN_ERR "%s: no IO support registered\n",
-			       __func__);
-			ret = -EINVAL;
-			goto out;
-		}
-
-		if (!cpu_cur.info->need_pll)
-			cpu_cur.lock_pll = 1;
-
-		s3c_cpufreq_update_loctkime();
-
-		s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max,
-				     &cpu_cur.info->max);
-
-		if (cpu_cur.info->calc_freqtable)
-			s3c_cpufreq_build_freq();
-
-		ret = cpufreq_register_driver(&s3c24xx_driver);
-	}
-
- out:
-	return ret;
-}
-
-late_initcall(s3c_cpufreq_initcall);
-
-/**
- * s3c_plltab_register - register CPU PLL table.
- * @plls: The list of PLL entries.
- * @plls_no: The size of the PLL entries @plls.
- *
- * Register the given set of PLLs with the system.
- */
-int __init s3c_plltab_register(struct cpufreq_frequency_table *plls,
-			       unsigned int plls_no)
-{
-	struct cpufreq_frequency_table *vals;
-	unsigned int size;
-
-	size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1);
-
-	vals = kmalloc(size, GFP_KERNEL);
-	if (vals) {
-		memcpy(vals, plls, size);
-		pll_reg = vals;
-
-		/* write a terminating entry, we don't store it in the
-		 * table that is stored in the kernel */
-		vals += plls_no;
-		vals->frequency = CPUFREQ_TABLE_END;
-
-		printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
-	} else
-		printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
-
-	return vals ? 0 : -ENOMEM;
-}
diff --git a/arch/arm/mach-s3c24xx/s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h
index 548ced4..548ced4 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.h
+++ b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h
diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
index 663436d..bd064c0 100644
--- a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
@@ -31,7 +31,7 @@
 #include <plat/cpu-freq-core.h>
 #include <plat/clock.h>
 
-#include "s3c2412.h"
+#include <mach/s3c2412.h>
 
 #define print_ns(x) ((x) / 10), ((x) % 10)