Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "A large number of cleanups, all over the platforms.  This is dominated
  largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
  others moving code out of arch/arm into more appropriate subsystems.

  The clocksource and irqchip drivers are now abstracted to the point
  where platforms that are already cleaned up do not need to even
  specify the driver they use, it can all get configured from the device
  tree as we do for normal device drivers.  The clocksource changes
  basically touch every single platform in the process.

  We further clean up the use of platform specific header files here,
  with the goal of turning more of the platforms over to being
  "multiplatform" enabled, which implies that they cannot expose their
  headers to architecture independent code any more.

  It is expected that no functional changes are part of the cleanup.
  The overall reduction in total code lines is mostly the result of
  removing broken and obsolete code."

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
  ARM: mvebu: correct gated clock documentation
  ARM: kirkwood: add missing include for nsa310
  ARM: exynos: move exynos4210-combiner to drivers/irqchip
  mfd: db8500-prcmu: update resource passing
  drivers/db8500-cpufreq: delete dangling include
  ARM: at91: remove NEOCORE 926 board
  sunxi: Cleanup the reset code and add meaningful registers defines
  ARM: S3C24XX: header mach/regs-mem.h local
  ARM: S3C24XX: header mach/regs-power.h local
  ARM: S3C24XX: header mach/regs-s3c2412-mem.h local
  ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/
  ARM: S3C24XX: transform s3c2443 subirqs into new structure
  ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2443 irq code to irq.c
  ARM: S3C24XX: transform s3c2416 irqs into new structure
  ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2416 irq init to common irq code
  ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
  ARM: S3C24XX: Move irq syscore-ops to irq-pm
  clocksource: always define CLOCKSOURCE_OF_DECLARE
  ...

103 files changed, 6596 insertions, 1990 deletions

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 7079a70..37f513d 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -9,6 +9,15 @@
 
 if ARCH_S3C24XX
 
+config PLAT_S3C24XX
+	def_bool y
+	select ARCH_REQUIRE_GPIOLIB
+	select NO_IOPORT
+	select S3C_DEV_NAND
+	select IRQ_DOMAIN
+	help
+	  Base platform code for any Samsung S3C24XX device
+
 menu "SAMSUNG S3C24XX SoCs Support"
 
 comment "S3C24XX SoCs"
@@ -83,6 +92,17 @@ config CPU_S3C2443
 
 # common code
 
+config S3C2410_CLOCK
+	bool
+	help
+	  Clock code for the S3C2410, and similar processors which
+	  is currently includes the S3C2410, S3C2440, S3C2442.
+
+config S3C24XX_DCLK
+	bool
+	help
+	  Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
+
 config S3C24XX_SMDK
 	bool
 	help
@@ -111,6 +131,22 @@ config S3C24XX_SETUP_TS
 	help
 	  Compile in platform device definition for Samsung TouchScreen.
 
+config S3C24XX_DMA
+	bool "S3C2410 DMA support"
+	depends on ARCH_S3C24XX
+	select S3C_DMA
+	help
+	  S3C2410 DMA support. This is needed for drivers like sound which
+	  use the S3C2410's DMA system to move data to and from the
+	  peripheral blocks.
+
+config S3C2410_DMA_DEBUG
+	bool "S3C2410 DMA support debug"
+	depends on ARCH_S3C24XX && S3C2410_DMA
+	help
+	  Enable debugging output for the DMA code. This option sends info
+	  to the kernel log, at priority KERN_DEBUG.
+
 config S3C2410_DMA
 	bool
 	depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
@@ -123,10 +159,92 @@ config S3C2410_PM
 	help
 	  Power Management code common to S3C2410 and better
 
+# low-level serial option nodes
+
+config CPU_LLSERIAL_S3C2410_ONLY
+	bool
+	default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
+
+config CPU_LLSERIAL_S3C2440_ONLY
+	bool
+	default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
+
+config CPU_LLSERIAL_S3C2410
+	bool
+	help
+	  Selected if there is an S3C2410 (or register compatible) serial
+	  low-level implementation needed
+
+config CPU_LLSERIAL_S3C2440
+	bool
+	help
+	  Selected if there is an S3C2440 (or register compatible) serial
+	  low-level implementation needed
+
+# gpio configurations
+
+config S3C24XX_GPIO_EXTRA
+	int
+	default 128 if S3C24XX_GPIO_EXTRA128
+	default 64 if S3C24XX_GPIO_EXTRA64
+	default 16 if ARCH_H1940
+	default 0
+
+config S3C24XX_GPIO_EXTRA64
+	bool
+	help
+	  Add an extra 64 gpio numbers to the available GPIO pool. This is
+	  available for boards that need extra gpios for external devices.
+
+config S3C24XX_GPIO_EXTRA128
+	bool
+	help
+	  Add an extra 128 gpio numbers to the available GPIO pool. This is
+	  available for boards that need extra gpios for external devices.
+
+# cpu frequency items common between s3c2410 and s3c2440/s3c2442
+
+config S3C2410_IOTIMING
+	bool
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Internal node to select io timing code that is common to the s3c2410
+	  and s3c2440/s3c2442 cpu frequency support.
+
+config S3C2410_CPUFREQ_UTILS
+	bool
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Internal node to select timing code that is common to the s3c2410
+	  and s3c2440/s3c244 cpu frequency support.
+
+# cpu frequency support common to s3c2412, s3c2413 and s3c2442
+
+config S3C2412_IOTIMING
+	bool
+	depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+	help
+	  Intel node to select io timing code that is common to the s3c2412
+	  and the s3c2443.
+
 # cpu-specific sections
 
 if CPU_S3C2410
 
+config S3C2410_CPUFREQ
+	bool
+	depends on CPU_FREQ_S3C24XX && CPU_S3C2410
+	select S3C2410_CPUFREQ_UTILS
+	help
+	  CPU Frequency scaling support for S3C2410
+
+config S3C2410_PLL
+	bool
+	depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+	default y
+	help
+	  Select the PLL table for the S3C2410
+
 config S3C24XX_SIMTEC_NOR
 	bool
 	help
@@ -267,6 +385,14 @@ config CPU_S3C2412_ONLY
 		   !CPU_S3C2443 && CPU_S3C2412
 	default y
 
+config S3C2412_CPUFREQ
+	bool
+	depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+	default y
+	select S3C2412_IOTIMING
+	help
+	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
+
 config S3C2412_DMA
 	bool
 	help
@@ -367,11 +493,45 @@ endif	# CPU_S3C2416
 
 if CPU_S3C2440
 
+config S3C2440_CPUFREQ
+	bool "S3C2440/S3C2442 CPU Frequency scaling support"
+	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+	default y
+	select S3C2410_CPUFREQ_UTILS
+	help
+	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
 config S3C2440_DMA
 	bool
 	help
 	  Support for S3C2440 specific DMA code5A
 
+config S3C2440_XTAL_12000000
+	bool
+	help
+	  Indicate that the build needs to support 12MHz system
+	  crystal.
+
+config S3C2440_XTAL_16934400
+	bool
+	help
+	  Indicate that the build needs to support 16.9344MHz system
+	  crystal.
+
+config S3C2440_PLL_12000000
+	bool
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+	bool
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
 comment "S3C2440 Boards"
 
 #
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 0ab6ab1..af53d27 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -14,26 +14,32 @@ obj-				:=
 
 # core
 
-obj-y				+= common.o
+obj-y				+= common.o irq.o
 
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
+obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpufreq-s3c2410.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma-s3c2410.o
+obj-$(CONFIG_S3C2410_PLL)	+= pll-s3c2410.o
 obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
 
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o irq-s3c2412.o clock-s3c2412.o
+obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpufreq-s3c2412.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma-s3c2412.o
 obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
 obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
 
-obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o irq-s3c2416.o clock-s3c2416.o
+obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o clock-s3c2416.o
 obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
 
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o irq-s3c2440.o clock-s3c2440.o
 obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o irq-s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_S3C2440_CPUFREQ)	+= cpufreq-s3c2440.o
 obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
+obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
 
-obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o irq-s3c2443.o clock-s3c2443.o
+obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o clock-s3c2443.o
 
 # PM
 
@@ -41,9 +47,21 @@ obj-$(CONFIG_PM)		+= pm.o irq-pm.o sleep.o
 
 # common code
 
+obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
+obj-$(CONFIG_S3C24XX_DMA)	+= dma.o
+
+obj-$(CONFIG_S3C2410_CLOCK)	+= clock-s3c2410.o
+obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o
+
+obj-$(CONFIG_S3C2410_IOTIMING)	+= iotiming-s3c2410.o
+obj-$(CONFIG_S3C2412_IOTIMING)	+= iotiming-s3c2412.o
+
 obj-$(CONFIG_S3C2443_COMMON)	+= common-s3c2443.o
 obj-$(CONFIG_S3C2443_DMA)	+= dma-s3c2443.o
 
+obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpufreq.o
+obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpufreq-debugfs.o
+
 #
 # machine support
 # following is ordered alphabetically by option text.
diff --git a/arch/arm/mach-s3c24xx/anubis.h b/arch/arm/mach-s3c24xx/anubis.h
new file mode 100644
index 0000000..2691665
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/anubis.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * ANUBIS - CPLD control constants
+ * ANUBIS - IRQ Number definitions
+ * ANUBIS - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C24XX_ANUBIS_H
+#define __MACH_S3C24XX_ANUBIS_H __FILE__
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define ANUBIS_CTRL1_NANDSEL		(0x3)
+
+/* IDREG - revision */
+
+#define ANUBIS_IDREG_REVMASK		(0x7)
+
+/* irq */
+
+#define ANUBIS_IRQ_IDE0			IRQ_EINT2
+#define ANUBIS_IRQ_IDE1			IRQ_EINT3
+#define ANUBIS_IRQ_ASIX			IRQ_EINT1
+
+/* map */
+
+/* start peripherals off after the S3C2410 */
+
+#define ANUBIS_IOADDR(x)		(S3C2410_ADDR((x) + 0x01800000))
+
+#define ANUBIS_PA_CPLD			(S3C2410_CS1 | (1<<26))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define ANUBIS_VA_CTRL1			ANUBIS_IOADDR(0x00000000)
+#define ANUBIS_PA_CTRL1			ANUBIS_PA_CPLD
+
+#define ANUBIS_VA_IDREG			ANUBIS_IOADDR(0x00300000)
+#define ANUBIS_PA_IDREG			(ANUBIS_PA_CPLD + (3 << 23))
+
+#define ANUBIS_IDEPRI			ANUBIS_IOADDR(0x01000000)
+#define ANUBIS_IDEPRIAUX		ANUBIS_IOADDR(0x01100000)
+#define ANUBIS_IDESEC			ANUBIS_IOADDR(0x01200000)
+#define ANUBIS_IDESECAUX		ANUBIS_IOADDR(0x01300000)
+
+#endif /* __MACH_S3C24XX_ANUBIS_H */
diff --git a/arch/arm/mach-s3c24xx/bast-ide.c b/arch/arm/mach-s3c24xx/bast-ide.c
index ba02cf8..3f0288f 100644
--- a/arch/arm/mach-s3c24xx/bast-ide.c
+++ b/arch/arm/mach-s3c24xx/bast-ide.c
@@ -25,8 +25,8 @@
 #include <asm/mach/irq.h>
 
 #include <mach/map.h>
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
+
+#include "bast.h"
 
 /* IDE ports */
 
@@ -34,12 +34,10 @@ static struct pata_platform_info bast_ide_platdata = {
 	.ioport_shift	= 5,
 };
 
-#define IDE_CS	S3C2410_CS5
-
 static struct resource bast_ide0_resource[] = {
-	[0] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDEPRI, 8 * 0x20),
-	[1] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20),
-	[2] = DEFINE_RES_IRQ(IRQ_IDE0),
+	[0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRI, 8 * 0x20),
+	[1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20),
+	[2] = DEFINE_RES_IRQ(BAST_IRQ_IDE0),
 };
 
 static struct platform_device bast_device_ide0 = {
@@ -55,9 +53,9 @@ static struct platform_device bast_device_ide0 = {
 };
 
 static struct resource bast_ide1_resource[] = {
-	[0] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDESEC, 8 * 0x20),
-	[1] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20),
-	[2] = DEFINE_RES_IRQ(IRQ_IDE1),
+	[0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESEC, 8 * 0x20),
+	[1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20),
+	[2] = DEFINE_RES_IRQ(BAST_IRQ_IDE1),
 };
 
 static struct platform_device bast_device_ide1 = {
diff --git a/arch/arm/mach-s3c24xx/bast-irq.c b/arch/arm/mach-s3c24xx/bast-irq.c
index ac7b2ad..c0daa95 100644
--- a/arch/arm/mach-s3c24xx/bast-irq.c
+++ b/arch/arm/mach-s3c24xx/bast-irq.c
@@ -27,27 +27,20 @@
 #include <linux/device.h>
 #include <linux/io.h>
 
-#include <asm/mach-types.h>
-
-#include <mach/hardware.h>
 #include <asm/irq.h>
-
+#include <asm/mach-types.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/regs-irq.h>
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
 
 #include <plat/irq.h>
 
-#if 0
-#include <asm/debug-ll.h>
-#endif
+#include "bast.h"
 
 #define irqdbf(x...)
 #define irqdbf2(x...)
 
-
 /* handle PC104 ISA interrupts from the system CPLD */
 
 /* table of ISA irq nos to the relevant mask... zero means
@@ -87,7 +80,7 @@ bast_pc104_mask(struct irq_data *data)
 static void
 bast_pc104_maskack(struct irq_data *data)
 {
-	struct irq_desc *desc = irq_desc + IRQ_ISA;
+	struct irq_desc *desc = irq_desc + BAST_IRQ_ISA;
 
 	bast_pc104_mask(data);
 	desc->irq_data.chip->irq_ack(&desc->irq_data);
@@ -122,7 +115,7 @@ bast_irq_pc104_demux(unsigned int irq,
 	if (unlikely(stat == 0)) {
 		/* ack if we get an irq with nothing (ie, startup) */
 
-		desc = irq_desc + IRQ_ISA;
+		desc = irq_desc + BAST_IRQ_ISA;
 		desc->irq_data.chip->irq_ack(&desc->irq_data);
 	} else {
 		/* handle the IRQ */
@@ -147,7 +140,7 @@ static __init int bast_irq_init(void)
 
 		__raw_writeb(0x0, BAST_VA_PC104_IRQMASK);
 
-		irq_set_chained_handler(IRQ_ISA, bast_irq_pc104_demux);
+		irq_set_chained_handler(BAST_IRQ_ISA, bast_irq_pc104_demux);
 
 		/* register our IRQs */
 
diff --git a/arch/arm/mach-s3c24xx/bast.h b/arch/arm/mach-s3c24xx/bast.h
new file mode 100644
index 0000000..5c7534b
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/bast.h
@@ -0,0 +1,197 @@
+/*
+ * Copyright (c) 2003-2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * BAST - CPLD control constants
+ * BAST - IRQ Number definitions
+ * BAST - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C24XX_BAST_H
+#define __MACH_S3C24XX_BAST_H __FILE__
+
+/* CTRL1 - Audio LR routing */
+
+#define BAST_CPLD_CTRL1_LRCOFF		(0x00)
+#define BAST_CPLD_CTRL1_LRCADC		(0x01)
+#define BAST_CPLD_CTRL1_LRCDAC		(0x02)
+#define BAST_CPLD_CTRL1_LRCARM		(0x03)
+#define BAST_CPLD_CTRL1_LRMASK		(0x03)
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define BAST_CPLD_CTRL2_WNAND		(0x04)
+#define BAST_CPLD_CTLR2_IDERST		(0x08)
+
+/* CTRL3 - rom write control, CPLD identity */
+
+#define BAST_CPLD_CTRL3_IDMASK		(0x0e)
+#define BAST_CPLD_CTRL3_ROMWEN		(0x01)
+
+/* CTRL4 - 8bit LCD interface control/status */
+
+#define BAST_CPLD_CTRL4_LLAT		(0x01)
+#define BAST_CPLD_CTRL4_LCDRW		(0x02)
+#define BAST_CPLD_CTRL4_LCDCMD		(0x04)
+#define BAST_CPLD_CTRL4_LCDE2		(0x01)
+
+/* CTRL5 - DMA routing */
+
+#define BAST_CPLD_DMA0_PRIIDE		(0)
+#define BAST_CPLD_DMA0_SECIDE		(1)
+#define BAST_CPLD_DMA0_ISA15		(2)
+#define BAST_CPLD_DMA0_ISA36		(3)
+
+#define BAST_CPLD_DMA1_PRIIDE		(0 << 2)
+#define BAST_CPLD_DMA1_SECIDE		(1 << 2)
+#define BAST_CPLD_DMA1_ISA15		(2 << 2)
+#define BAST_CPLD_DMA1_ISA36		(3 << 2)
+
+/* irq numbers to onboard peripherals */
+
+#define BAST_IRQ_USBOC			IRQ_EINT18
+#define BAST_IRQ_IDE0			IRQ_EINT16
+#define BAST_IRQ_IDE1			IRQ_EINT17
+#define BAST_IRQ_PCSERIAL1		IRQ_EINT15
+#define BAST_IRQ_PCSERIAL2		IRQ_EINT14
+#define BAST_IRQ_PCPARALLEL		IRQ_EINT13
+#define BAST_IRQ_ASIX			IRQ_EINT11
+#define BAST_IRQ_DM9000			IRQ_EINT10
+#define BAST_IRQ_ISA			IRQ_EINT9
+#define BAST_IRQ_SMALERT		IRQ_EINT8
+
+/* map */
+
+/*
+ * ok, we've used up to 0x13000000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space. We also have the board's CPLD to find register space
+ * for.
+ */
+
+#define BAST_IOADDR(x)			(S3C2410_ADDR((x) + 0x01300000))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define BAST_VA_CTRL1			BAST_IOADDR(0x00000000)
+#define BAST_PA_CTRL1			(S3C2410_CS5 | 0x7800000)
+
+#define BAST_VA_CTRL2			BAST_IOADDR(0x00100000)
+#define BAST_PA_CTRL2			(S3C2410_CS1 | 0x6000000)
+
+#define BAST_VA_CTRL3			BAST_IOADDR(0x00200000)
+#define BAST_PA_CTRL3			(S3C2410_CS1 | 0x6800000)
+
+#define BAST_VA_CTRL4			BAST_IOADDR(0x00300000)
+#define BAST_PA_CTRL4			(S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define BAST_PA_PC104_IRQREQ		(S3C2410_CS5 | 0x6000000)
+#define BAST_VA_PC104_IRQREQ		BAST_IOADDR(0x00400000)
+
+#define BAST_PA_PC104_IRQRAW		(S3C2410_CS5 | 0x6800000)
+#define BAST_VA_PC104_IRQRAW		BAST_IOADDR(0x00500000)
+
+#define BAST_PA_PC104_IRQMASK		(S3C2410_CS5 | 0x7000000)
+#define BAST_VA_PC104_IRQMASK		BAST_IOADDR(0x00600000)
+
+#define BAST_PA_LCD_RCMD1		(0x8800000)
+#define BAST_VA_LCD_RCMD1		BAST_IOADDR(0x00700000)
+
+#define BAST_PA_LCD_WCMD1		(0x8000000)
+#define BAST_VA_LCD_WCMD1		BAST_IOADDR(0x00800000)
+
+#define BAST_PA_LCD_RDATA1		(0x9800000)
+#define BAST_VA_LCD_RDATA1		BAST_IOADDR(0x00900000)
+
+#define BAST_PA_LCD_WDATA1		(0x9000000)
+#define BAST_VA_LCD_WDATA1		BAST_IOADDR(0x00A00000)
+
+#define BAST_PA_LCD_RCMD2		(0xA800000)
+#define BAST_VA_LCD_RCMD2		BAST_IOADDR(0x00B00000)
+
+#define BAST_PA_LCD_WCMD2		(0xA000000)
+#define BAST_VA_LCD_WCMD2		BAST_IOADDR(0x00C00000)
+
+#define BAST_PA_LCD_RDATA2		(0xB800000)
+#define BAST_VA_LCD_RDATA2		BAST_IOADDR(0x00D00000)
+
+#define BAST_PA_LCD_WDATA2		(0xB000000)
+#define BAST_VA_LCD_WDATA2		BAST_IOADDR(0x00E00000)
+
+
+/*
+ * 0xE0000000 contains the IO space that is split by speed and
+ * whether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000  8bit,  slow
+ * 0x04000000 to 0x08000000  16bit, slow
+ * 0x08000000 to 0x0C000000  16bit, net
+ * 0x0C000000 to 0x10000000  16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x00000000 to 0x01000000 16MB ISA IO space
+ * 0x01000000 to 0x02000000 16MB ISA memory space
+ * 0x02000000 to 0x02100000 1MB  IDE primary channel
+ * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB  IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
+ * 0x02400000 to 0x02500000 1MB  ASIX ethernet controller
+ * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controller
+ * 0x02600000 to 0x02700000 1MB  PC SuperIO controller
+ *
+ * the phyiscal layout of the zones are:
+ *  nGCS2 - 8bit, slow
+ *  nGCS3 - 16bit, slow
+ *  nGCS4 - 16bit, net
+ *  nGCS5 - 16bit, fast
+ */
+
+#define BAST_VA_MULTISPACE		(0xE0000000)
+
+#define BAST_VA_ISAIO			(BAST_VA_MULTISPACE + 0x00000000)
+#define BAST_VA_ISAMEM			(BAST_VA_MULTISPACE + 0x01000000)
+#define BAST_VA_IDEPRI			(BAST_VA_MULTISPACE + 0x02000000)
+#define BAST_VA_IDEPRIAUX		(BAST_VA_MULTISPACE + 0x02100000)
+#define BAST_VA_IDESEC			(BAST_VA_MULTISPACE + 0x02200000)
+#define BAST_VA_IDESECAUX		(BAST_VA_MULTISPACE + 0x02300000)
+#define BAST_VA_ASIXNET			(BAST_VA_MULTISPACE + 0x02400000)
+#define BAST_VA_DM9000			(BAST_VA_MULTISPACE + 0x02500000)
+#define BAST_VA_SUPERIO			(BAST_VA_MULTISPACE + 0x02600000)
+
+#define BAST_VAM_CS2			(0x00000000)
+#define BAST_VAM_CS3			(0x04000000)
+#define BAST_VAM_CS4			(0x08000000)
+#define BAST_VAM_CS5			(0x0C000000)
+
+/* physical offset addresses for the peripherals */
+
+#define BAST_PA_ISAIO			(0x00000000)
+#define BAST_PA_ASIXNET			(0x01000000)
+#define BAST_PA_SUPERIO			(0x01800000)
+#define BAST_PA_IDEPRI			(0x02000000)
+#define BAST_PA_IDEPRIAUX		(0x02800000)
+#define BAST_PA_IDESEC			(0x03000000)
+#define BAST_PA_IDESECAUX		(0x03800000)
+#define BAST_PA_ISAMEM			(0x04000000)
+#define BAST_PA_DM9000			(0x05000000)
+
+/* some configurations for the peripherals */
+
+#define BAST_PCSIO			(BAST_VA_SUPERIO + BAST_VAM_CS2)
+
+#define BAST_ASIXNET_CS			BAST_VAM_CS5
+#define BAST_DM9000_CS			BAST_VAM_CS4
+
+#define BAST_IDE_CS	S3C2410_CS5
+
+#endif /* __MACH_S3C24XX_BAST_H */
diff --git a/arch/arm/mach-s3c24xx/clock-dclk.c b/arch/arm/mach-s3c24xx/clock-dclk.c
new file mode 100644
index 0000000..1edd9b2
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/clock-dclk.c
@@ -0,0 +1,195 @@
+/*
+ * Copyright (c) 2004-2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C24XX - definitions for DCLK and CLKOUT registers
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+/* clocks that could be registered by external code */
+
+static int s3c24xx_dclk_enable(struct clk *clk, int enable)
+{
+	unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
+
+	if (enable)
+		dclkcon |= clk->ctrlbit;
+	else
+		dclkcon &= ~clk->ctrlbit;
+
+	__raw_writel(dclkcon, S3C24XX_DCLKCON);
+
+	return 0;
+}
+
+static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
+{
+	unsigned long dclkcon;
+	unsigned int uclk;
+
+	if (parent == &clk_upll)
+		uclk = 1;
+	else if (parent == &clk_p)
+		uclk = 0;
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	dclkcon = __raw_readl(S3C24XX_DCLKCON);
+
+	if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
+		if (uclk)
+			dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
+		else
+			dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
+	} else {
+		if (uclk)
+			dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
+		else
+			dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
+	}
+
+	__raw_writel(dclkcon, S3C24XX_DCLKCON);
+
+	return 0;
+}
+static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate)
+{
+	unsigned long div;
+
+	if ((rate == 0) || !clk->parent)
+		return 0;
+
+	div = clk_get_rate(clk->parent) / rate;
+	if (div < 2)
+		div = 2;
+	else if (div > 16)
+		div = 16;
+
+	return div;
+}
+
+static unsigned long s3c24xx_round_dclk_rate(struct clk *clk,
+	unsigned long rate)
+{
+	unsigned long div = s3c24xx_calc_div(clk, rate);
+
+	if (div == 0)
+		return 0;
+
+	return clk_get_rate(clk->parent) / div;
+}
+
+static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long mask, data, div = s3c24xx_calc_div(clk, rate);
+
+	if (div == 0)
+		return -EINVAL;
+
+	if (clk == &s3c24xx_dclk0) {
+		mask = S3C2410_DCLKCON_DCLK0_DIV_MASK |
+			S3C2410_DCLKCON_DCLK0_CMP_MASK;
+		data = S3C2410_DCLKCON_DCLK0_DIV(div) |
+			S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2);
+	} else if (clk == &s3c24xx_dclk1) {
+		mask = S3C2410_DCLKCON_DCLK1_DIV_MASK |
+			S3C2410_DCLKCON_DCLK1_CMP_MASK;
+		data = S3C2410_DCLKCON_DCLK1_DIV(div) |
+			S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2);
+	} else
+		return -EINVAL;
+
+	clk->rate = clk_get_rate(clk->parent) / div;
+	__raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data),
+		S3C24XX_DCLKCON);
+	return clk->rate;
+}
+static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
+{
+	unsigned long mask;
+	unsigned long source;
+
+	/* calculate the MISCCR setting for the clock */
+
+	if (parent == &clk_mpll)
+		source = S3C2410_MISCCR_CLK0_MPLL;
+	else if (parent == &clk_upll)
+		source = S3C2410_MISCCR_CLK0_UPLL;
+	else if (parent == &clk_f)
+		source = S3C2410_MISCCR_CLK0_FCLK;
+	else if (parent == &clk_h)
+		source = S3C2410_MISCCR_CLK0_HCLK;
+	else if (parent == &clk_p)
+		source = S3C2410_MISCCR_CLK0_PCLK;
+	else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
+		source = S3C2410_MISCCR_CLK0_DCLK0;
+	else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
+		source = S3C2410_MISCCR_CLK0_DCLK0;
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	if (clk == &s3c24xx_clkout0)
+		mask = S3C2410_MISCCR_CLK0_MASK;
+	else {
+		source <<= 4;
+		mask = S3C2410_MISCCR_CLK1_MASK;
+	}
+
+	s3c2410_modify_misccr(mask, source);
+	return 0;
+}
+
+/* external clock definitions */
+
+static struct clk_ops dclk_ops = {
+	.set_parent	= s3c24xx_dclk_setparent,
+	.set_rate	= s3c24xx_set_dclk_rate,
+	.round_rate	= s3c24xx_round_dclk_rate,
+};
+
+struct clk s3c24xx_dclk0 = {
+	.name		= "dclk0",
+	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
+	.enable	        = s3c24xx_dclk_enable,
+	.ops		= &dclk_ops,
+};
+
+struct clk s3c24xx_dclk1 = {
+	.name		= "dclk1",
+	.ctrlbit	= S3C2410_DCLKCON_DCLK1EN,
+	.enable		= s3c24xx_dclk_enable,
+	.ops		= &dclk_ops,
+};
+
+static struct clk_ops clkout_ops = {
+	.set_parent	= s3c24xx_clkout_setparent,
+};
+
+struct clk s3c24xx_clkout0 = {
+	.name		= "clkout0",
+	.ops		= &clkout_ops,
+};
+
+struct clk s3c24xx_clkout1 = {
+	.name		= "clkout1",
+	.ops		= &clkout_ops,
+};
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c
new file mode 100644
index 0000000..641266f3
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c
@@ -0,0 +1,252 @@
+/*
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410,S3C2440,S3C2442 Clock control support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/s3c2410.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+int s3c2410_clkcon_enable(struct clk *clk, int enable)
+{
+	unsigned int clocks = clk->ctrlbit;
+	unsigned long clkcon;
+
+	clkcon = __raw_readl(S3C2410_CLKCON);
+
+	if (enable)
+		clkcon |= clocks;
+	else
+		clkcon &= ~clocks;
+
+	/* ensure none of the special function bits set */
+	clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
+
+	__raw_writel(clkcon, S3C2410_CLKCON);
+
+	return 0;
+}
+
+static int s3c2410_upll_enable(struct clk *clk, int enable)
+{
+	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
+	unsigned long orig = clkslow;
+
+	if (enable)
+		clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
+	else
+		clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
+
+	__raw_writel(clkslow, S3C2410_CLKSLOW);
+
+	/* if we started the UPLL, then allow to settle */
+
+	if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
+		udelay(200);
+
+	return 0;
+}
+
+/* standard clock definitions */
+
+static struct clk init_clocks_off[] = {
+	{
+		.name		= "nand",
+		.parent		= &clk_h,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_NAND,
+	}, {
+		.name		= "sdi",
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_SDI,
+	}, {
+		.name		= "adc",
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_ADC,
+	}, {
+		.name		= "i2c",
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_IIC,
+	}, {
+		.name		= "iis",
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_IIS,
+	}, {
+		.name		= "spi",
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_SPI,
+	}
+};
+
+static struct clk init_clocks[] = {
+	{
+		.name		= "lcd",
+		.parent		= &clk_h,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_LCDC,
+	}, {
+		.name		= "gpio",
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_GPIO,
+	}, {
+		.name		= "usb-host",
+		.parent		= &clk_h,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_USBH,
+	}, {
+		.name		= "usb-device",
+		.parent		= &clk_h,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_USBD,
+	}, {
+		.name		= "timers",
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_PWMT,
+	}, {
+		.name		= "uart",
+		.devname	= "s3c2410-uart.0",
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_UART0,
+	}, {
+		.name		= "uart",
+		.devname	= "s3c2410-uart.1",
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_UART1,
+	}, {
+		.name		= "uart",
+		.devname	= "s3c2410-uart.2",
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_UART2,
+	}, {
+		.name		= "rtc",
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_RTC,
+	}, {
+		.name		= "watchdog",
+		.parent		= &clk_p,
+		.ctrlbit	= 0,
+	}, {
+		.name		= "usb-bus-host",
+		.parent		= &clk_usb_bus,
+	}, {
+		.name		= "usb-bus-gadget",
+		.parent		= &clk_usb_bus,
+	},
+};
+
+/* s3c2410_baseclk_add()
+ *
+ * Add all the clocks used by the s3c2410 or compatible CPUs
+ * such as the S3C2440 and S3C2442.
+ *
+ * We cannot use a system device as we are needed before any
+ * of the init-calls that initialise the devices are actually
+ * done.
+*/
+
+int __init s3c2410_baseclk_add(void)
+{
+	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
+	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
+	struct clk *clkp;
+	struct clk *xtal;
+	int ret;
+	int ptr;
+
+	clk_upll.enable = s3c2410_upll_enable;
+
+	if (s3c24xx_register_clock(&clk_usb_bus) < 0)
+		printk(KERN_ERR "failed to register usb bus clock\n");
+
+	/* register clocks from clock array */
+
+	clkp = init_clocks;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+		/* ensure that we note the clock state */
+
+		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+
+	/* We must be careful disabling the clocks we are not intending to
+	 * be using at boot time, as subsystems such as the LCD which do
+	 * their own DMA requests to the bus can cause the system to lockup
+	 * if they where in the middle of requesting bus access.
+	 *
+	 * Disabling the LCD clock if the LCD is active is very dangerous,
+	 * and therefore the bootloader should be careful to not enable
+	 * the LCD clock if it is not needed.
+	*/
+
+	/* install (and disable) the clocks we do not need immediately */
+
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+	/* show the clock-slow value */
+
+	xtal = clk_get(NULL, "xtal");
+
+	printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
+	       print_mhz(clk_get_rate(xtal) /
+			 ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
+	       (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
+	       (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
+	       (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
+
+	s3c_pwmclk_init();
+	return 0;
+}
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index c2f596e..ed6276f 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -15,4 +15,6 @@
 void s3c2410_restart(char mode, const char *cmd);
 void s3c244x_restart(char mode, const char *cmd);
 
+extern struct syscore_ops s3c24xx_irq_syscore_ops;
+
 #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/mach-s3c24xx/cpufreq-debugfs.c b/arch/arm/mach-s3c24xx/cpufreq-debugfs.c
new file mode 100644
index 0000000..9b7b428
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/cpufreq-debugfs.c
@@ -0,0 +1,198 @@
+/*
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - debugfs status support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/err.h>
+
+#include <plat/cpu-freq-core.h>
+
+static struct dentry *dbgfs_root;
+static struct dentry *dbgfs_file_io;
+static struct dentry *dbgfs_file_info;
+static struct dentry *dbgfs_file_board;
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+static void show_max(struct seq_file *seq, struct s3c_freq *f)
+{
+	seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n",
+		   f->fclk, f->hclk, f->pclk, f->armclk);
+}
+
+static int board_show(struct seq_file *seq, void *p)
+{
+	struct s3c_cpufreq_config *cfg;
+	struct s3c_cpufreq_board *brd;
+
+	cfg = s3c_cpufreq_getconfig();
+	if (!cfg) {
+		seq_printf(seq, "no configuration registered\n");
+		return 0;
+	}
+
+	brd = cfg->board;
+	if (!brd) {
+		seq_printf(seq, "no board definition set?\n");
+		return 0;
+	}
+
+	seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh);
+	seq_printf(seq, "auto_io=%u\n", brd->auto_io);
+	seq_printf(seq, "need_io=%u\n", brd->need_io);
+
+	show_max(seq, &brd->max);
+
+
+	return 0;
+}
+
+static int fops_board_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, board_show, NULL);
+}
+
+static const struct file_operations fops_board = {
+	.open		= fops_board_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
+
+static int info_show(struct seq_file *seq, void *p)
+{
+	struct s3c_cpufreq_config *cfg;
+
+	cfg = s3c_cpufreq_getconfig();
+	if (!cfg) {
+		seq_printf(seq, "no configuration registered\n");
+		return 0;
+	}
+
+	seq_printf(seq, "  FCLK %ld Hz\n", cfg->freq.fclk);
+	seq_printf(seq, "  HCLK %ld Hz (%lu.%lu ns)\n",
+		   cfg->freq.hclk, print_ns(cfg->freq.hclk_tns));
+	seq_printf(seq, "  PCLK %ld Hz\n", cfg->freq.hclk);
+	seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk);
+	seq_printf(seq, "\n");
+
+	show_max(seq, &cfg->max);
+
+	seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n",
+		   cfg->divs.h_divisor, cfg->divs.p_divisor,
+		   cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off");
+	seq_printf(seq, "\n");
+
+	seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll);
+
+	return 0;
+}
+
+static int fops_info_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, info_show, NULL);
+}
+
+static const struct file_operations fops_info = {
+	.open		= fops_info_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
+
+static int io_show(struct seq_file *seq, void *p)
+{
+	void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *);
+	struct s3c_cpufreq_config *cfg;
+	struct s3c_iotimings *iot;
+	union s3c_iobank *iob;
+	int bank;
+
+	cfg = s3c_cpufreq_getconfig();
+	if (!cfg) {
+		seq_printf(seq, "no configuration registered\n");
+		return 0;
+	}
+
+	show_bank = cfg->info->debug_io_show;
+	if (!show_bank) {
+		seq_printf(seq, "no code to show bank timing\n");
+		return 0;
+	}
+
+	iot = s3c_cpufreq_getiotimings();
+	if (!iot) {
+		seq_printf(seq, "no io timings registered\n");
+		return 0;
+	}
+
+	seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns));
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		iob = &iot->bank[bank];
+
+		seq_printf(seq, "bank %d: ", bank);
+
+		if (!iob->io_2410) {
+			seq_printf(seq, "nothing set\n");
+			continue;
+		}
+
+		show_bank(seq, cfg, iob);
+	}
+
+	return 0;
+}
+
+static int fops_io_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, io_show, NULL);
+}
+
+static const struct file_operations fops_io = {
+	.open		= fops_io_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
+
+
+static int __init s3c_freq_debugfs_init(void)
+{
+	dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL);
+	if (IS_ERR(dbgfs_root)) {
+		printk(KERN_ERR "%s: error creating debugfs root\n", __func__);
+		return PTR_ERR(dbgfs_root);
+	}
+
+	dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root,
+					    NULL, &fops_io);
+
+	dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root,
+					      NULL, &fops_info);
+
+	dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root,
+					       NULL, &fops_board);
+
+	return 0;
+}
+
+late_initcall(s3c_freq_debugfs_init);
+
diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
new file mode 100644
index 0000000..cfa0dd8
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (c) 2006-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
+
+static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	u32 clkdiv = 0;
+
+	if (cfg->divs.h_divisor == 2)
+		clkdiv |= S3C2410_CLKDIVN_HDIVN;
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2410_CLKDIVN_PDIVN;
+
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+}
+
+static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long hclk, fclk, pclk;
+	unsigned int hdiv, pdiv;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	hclk_max = cfg->max.hclk;
+
+	cfg->freq.armclk = fclk;
+
+	s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n",
+		      __func__, fclk, hclk_max);
+
+	hdiv = (fclk > cfg->max.hclk) ? 2 : 1;
+	hclk = fclk / hdiv;
+
+	if (hclk > cfg->max.hclk) {
+		s3c_freq_dbg("%s: hclk too big\n", __func__);
+		return -EINVAL;
+	}
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+	pclk = hclk / pdiv;
+
+	if (pclk > cfg->max.pclk) {
+		s3c_freq_dbg("%s: pclk too big\n", __func__);
+		return -EINVAL;
+	}
+
+	pdiv *= hdiv;
+
+	/* record the result */
+	cfg->divs.p_divisor = pdiv;
+	cfg->divs.h_divisor = hdiv;
+
+	return 0;
+}
+
+static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
+	.max		= {
+		.fclk	= 200000000,
+		.hclk	= 100000000,
+		.pclk	=  50000000,
+	},
+
+	/* transition latency is about 5ms worst-case, so
+	 * set 10ms to be sure */
+	.latency	= 10000000,
+
+	.locktime_m	= 150,
+	.locktime_u	= 150,
+	.locktime_bits	= 12,
+
+	.need_pll	= 1,
+
+	.name		= "s3c2410",
+	.calc_iotiming	= s3c2410_iotiming_calc,
+	.set_iotiming	= s3c2410_iotiming_set,
+	.get_iotiming	= s3c2410_iotiming_get,
+	.resume_clocks	= s3c2410_setup_clocks,
+
+	.set_fvco	= s3c2410_set_fvco,
+	.set_refresh	= s3c2410_cpufreq_setrefresh,
+	.set_divs	= s3c2410_cpufreq_setdivs,
+	.calc_divs	= s3c2410_cpufreq_calcdivs,
+
+	.debug_io_show	= s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
+};
+
+static int s3c2410_cpufreq_add(struct device *dev,
+			       struct subsys_interface *sif)
+{
+	return s3c_cpufreq_register(&s3c2410_cpufreq_info);
+}
+
+static struct subsys_interface s3c2410_cpufreq_interface = {
+	.name		= "s3c2410_cpufreq",
+	.subsys		= &s3c2410_subsys,
+	.add_dev	= s3c2410_cpufreq_add,
+};
+
+static int __init s3c2410_cpufreq_init(void)
+{
+	return subsys_interface_register(&s3c2410_cpufreq_interface);
+}
+arch_initcall(s3c2410_cpufreq_init);
+
+static int s3c2410a_cpufreq_add(struct device *dev,
+				struct subsys_interface *sif)
+{
+	/* alter the maximum freq settings for S3C2410A. If a board knows
+	 * it only has a maximum of 200, then it should register its own
+	 * limits. */
+
+	s3c2410_cpufreq_info.max.fclk = 266000000;
+	s3c2410_cpufreq_info.max.hclk = 133000000;
+	s3c2410_cpufreq_info.max.pclk =  66500000;
+	s3c2410_cpufreq_info.name = "s3c2410a";
+
+	return s3c2410_cpufreq_add(dev, sif);
+}
+
+static struct subsys_interface s3c2410a_cpufreq_interface = {
+	.name		= "s3c2410a_cpufreq",
+	.subsys		= &s3c2410a_subsys,
+	.add_dev	= s3c2410a_cpufreq_add,
+};
+
+static int __init s3c2410a_cpufreq_init(void)
+{
+	return subsys_interface_register(&s3c2410a_cpufreq_interface);
+}
+arch_initcall(s3c2410a_cpufreq_init);
diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
new file mode 100644
index 0000000..8bf0f3a
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
@@ -0,0 +1,258 @@
+/*
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 CPU Frequency scalling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+#include "s3c2412.h"
+
+/* our clock resources. */
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned int hdiv, pdiv, armdiv, dvs;
+	unsigned long hclk, fclk, armclk, armdiv_clk;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	armclk = cfg->freq.armclk;
+	hclk_max = cfg->max.hclk;
+
+	/* We can't run hclk above armclk as at the best we have to
+	 * have armclk and hclk in dvs mode. */
+
+	if (hclk_max > armclk)
+		hclk_max = armclk;
+
+	s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n",
+		     __func__, fclk, armclk, hclk_max);
+	s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n",
+		     __func__, cfg->freq.fclk, cfg->freq.armclk,
+		     cfg->freq.hclk, cfg->freq.pclk);
+
+	armdiv = fclk / armclk;
+
+	if (armdiv < 1)
+		armdiv = 1;
+	if (armdiv > 2)
+		armdiv = 2;
+
+	cfg->divs.arm_divisor = armdiv;
+	armdiv_clk = fclk / armdiv;
+
+	hdiv = armdiv_clk / hclk_max;
+	if (hdiv < 1)
+		hdiv = 1;
+
+	cfg->freq.hclk = hclk = armdiv_clk / hdiv;
+
+	/* set dvs depending on whether we reached armclk or not. */
+	cfg->divs.dvs = dvs = armclk < armdiv_clk;
+
+	/* update the actual armclk we achieved. */
+	cfg->freq.armclk = dvs ? hclk : armdiv_clk;
+
+	s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n",
+		     __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs);
+
+	if (hdiv > 4)
+		goto invalid;
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+	if ((hclk / pdiv) > cfg->max.pclk)
+		pdiv++;
+
+	cfg->freq.pclk = hclk / pdiv;
+
+	s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+	if (pdiv > 2)
+		goto invalid;
+
+	pdiv *= hdiv;
+
+	/* store the result, and then return */
+
+	cfg->divs.h_divisor = hdiv * armdiv;
+	cfg->divs.p_divisor = pdiv * armdiv;
+
+	return 0;
+
+invalid:
+	return -EINVAL;
+}
+
+static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long clkdiv;
+	unsigned long olddiv;
+
+	olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
+
+	/* clear off current clock info */
+
+	clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN;
+	clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK;
+	clkdiv &= ~S3C2412_CLKDIVN_PDIVN;
+
+	if (cfg->divs.arm_divisor == 2)
+		clkdiv |= S3C2412_CLKDIVN_ARMDIVN;
+
+	clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1);
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2412_CLKDIVN_PDIVN;
+
+	s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+	clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	unsigned long refresh;
+
+	s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
+		     board->refresh, cfg->freq.hclk);
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * by 10 each to ensure that we do not overflow 32 bit numbers. This
+	 * should work for HCLK up to 133MHz and refresh period up to 30usec.
+	 */
+
+	refresh = (board->refresh / 10);
+	refresh *= (cfg->freq.hclk / 100);
+	refresh /= (1 * 1000 * 1000);	/* 10^6 */
+
+	s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
+	__raw_writel(refresh, S3C2412_REFRESH);
+}
+
+/* set the default cpu frequency information, based on an 200MHz part
+ * as we have no other way of detecting the speed rating in software.
+ */
+
+static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
+	.max		= {
+		.fclk	= 200000000,
+		.hclk	= 100000000,
+		.pclk	=  50000000,
+	},
+
+	.latency	= 5000000, /* 5ms */
+
+	.locktime_m	= 150,
+	.locktime_u	= 150,
+	.locktime_bits	= 16,
+
+	.name		= "s3c2412",
+	.set_refresh	= s3c2412_cpufreq_setrefresh,
+	.set_divs	= s3c2412_cpufreq_setdivs,
+	.calc_divs	= s3c2412_cpufreq_calcdivs,
+
+	.calc_iotiming	= s3c2412_iotiming_calc,
+	.set_iotiming	= s3c2412_iotiming_set,
+	.get_iotiming	= s3c2412_iotiming_get,
+
+	.resume_clocks	= s3c2412_setup_clocks,
+
+	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
+};
+
+static int s3c2412_cpufreq_add(struct device *dev,
+			       struct subsys_interface *sif)
+{
+	unsigned long fclk_rate;
+
+	hclk = clk_get(NULL, "hclk");
+	if (IS_ERR(hclk)) {
+		printk(KERN_ERR "%s: cannot find hclk clock\n", __func__);
+		return -ENOENT;
+	}
+
+	fclk = clk_get(NULL, "fclk");
+	if (IS_ERR(fclk)) {
+		printk(KERN_ERR "%s: cannot find fclk clock\n", __func__);
+		goto err_fclk;
+	}
+
+	fclk_rate = clk_get_rate(fclk);
+	if (fclk_rate > 200000000) {
+		printk(KERN_INFO
+		       "%s: fclk %ld MHz, assuming 266MHz capable part\n",
+		       __func__, fclk_rate / 1000000);
+		s3c2412_cpufreq_info.max.fclk = 266000000;
+		s3c2412_cpufreq_info.max.hclk = 133000000;
+		s3c2412_cpufreq_info.max.pclk =  66000000;
+	}
+
+	armclk = clk_get(NULL, "armclk");
+	if (IS_ERR(armclk)) {
+		printk(KERN_ERR "%s: cannot find arm clock\n", __func__);
+		goto err_armclk;
+	}
+
+	xtal = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal)) {
+		printk(KERN_ERR "%s: cannot find xtal clock\n", __func__);
+		goto err_xtal;
+	}
+
+	return s3c_cpufreq_register(&s3c2412_cpufreq_info);
+
+err_xtal:
+	clk_put(armclk);
+err_armclk:
+	clk_put(fclk);
+err_fclk:
+	clk_put(hclk);
+
+	return -ENOENT;
+}
+
+static struct subsys_interface s3c2412_cpufreq_interface = {
+	.name		= "s3c2412_cpufreq",
+	.subsys		= &s3c2412_subsys,
+	.add_dev	= s3c2412_cpufreq_add,
+};
+
+static int s3c2412_cpufreq_init(void)
+{
+	return subsys_interface_register(&s3c2412_cpufreq_interface);
+}
+arch_initcall(s3c2412_cpufreq_init);
diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
new file mode 100644
index 0000000..72b2cc8
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
@@ -0,0 +1,312 @@
+/*
+ * Copyright (c) 2006-2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@simtec.co.uk>
+ *
+ * S3C2440/S3C2442 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static inline int within_khz(unsigned long a, unsigned long b)
+{
+	long diff = a - b;
+
+	return (diff >= -1000 && diff <= 1000);
+}
+
+/**
+ * s3c2440_cpufreq_calcdivs - calculate divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Calcualte the divider values for the given frequency settings
+ * specified in @cfg. The values are stored in @cfg for later use
+ * by the relevant set routine if the request settings can be reached.
+ */
+int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned int hdiv, pdiv;
+	unsigned long hclk, fclk, armclk;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	armclk = cfg->freq.armclk;
+	hclk_max = cfg->max.hclk;
+
+	s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n",
+		     __func__, fclk, armclk, hclk_max);
+
+	if (armclk > fclk) {
+		printk(KERN_WARNING "%s: armclk > fclk\n", __func__);
+		armclk = fclk;
+	}
+
+	/* if we are in DVS, we need HCLK to be <= ARMCLK */
+	if (armclk < fclk && armclk < hclk_max)
+		hclk_max = armclk;
+
+	for (hdiv = 1; hdiv < 9; hdiv++) {
+		if (hdiv == 5 || hdiv == 7)
+			hdiv++;
+
+		hclk = (fclk / hdiv);
+		if (hclk <= hclk_max || within_khz(hclk, hclk_max))
+			break;
+	}
+
+	s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv);
+
+	if (hdiv > 8)
+		goto invalid;
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+	if ((hclk / pdiv) > cfg->max.pclk)
+		pdiv++;
+
+	s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+	if (pdiv > 2)
+		goto invalid;
+
+	pdiv *= hdiv;
+
+	/* calculate a valid armclk */
+
+	if (armclk < hclk)
+		armclk = hclk;
+
+	/* if we're running armclk lower than fclk, this really means
+	 * that the system should go into dvs mode, which means that
+	 * armclk is connected to hclk. */
+	if (armclk < fclk) {
+		cfg->divs.dvs = 1;
+		armclk = hclk;
+	} else
+		cfg->divs.dvs = 0;
+
+	cfg->freq.armclk = armclk;
+
+	/* store the result, and then return */
+
+	cfg->divs.h_divisor = hdiv;
+	cfg->divs.p_divisor = pdiv;
+
+	return 0;
+
+ invalid:
+	return -EINVAL;
+}
+
+#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \
+			   S3C2440_CAMDIVN_HCLK4_HALF)
+
+/**
+ * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Set the divisors from the settings in @cfg, which where generated
+ * during the calculation phase by s3c2440_cpufreq_calcdivs().
+ */
+static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long clkdiv, camdiv;
+
+	s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
+		     cfg->divs.h_divisor, cfg->divs.p_divisor);
+
+	clkdiv = __raw_readl(S3C2410_CLKDIVN);
+	camdiv = __raw_readl(S3C2440_CAMDIVN);
+
+	clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
+	camdiv &= ~CAMDIVN_HCLK_HALF;
+
+	switch (cfg->divs.h_divisor) {
+	case 1:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_1;
+		break;
+
+	case 2:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_2;
+		break;
+
+	case 6:
+		camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
+	case 3:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6;
+		break;
+
+	case 8:
+		camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
+	case 4:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8;
+		break;
+
+	default:
+		BUG();	/* we don't expect to get here. */
+	}
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2440_CLKDIVN_PDIVN;
+
+	/* todo - set pclk. */
+
+	/* Write the divisors first with hclk intentionally halved so that
+	 * when we write clkdiv we will under-frequency instead of over. We
+	 * then make a short delay and remove the hclk halving if necessary.
+	 */
+
+	__raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+	ndelay(20);
+	__raw_writel(camdiv, S3C2440_CAMDIVN);
+
+	clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static int run_freq_for(unsigned long max_hclk, unsigned long fclk,
+			int *divs,
+			struct cpufreq_frequency_table *table,
+			size_t table_size)
+{
+	unsigned long freq;
+	int index = 0;
+	int div;
+
+	for (div = *divs; div > 0; div = *divs++) {
+		freq = fclk / div;
+
+		if (freq > max_hclk && div != 1)
+			continue;
+
+		freq /= 1000; /* table is in kHz */
+		index = s3c_cpufreq_addfreq(table, index, table_size, freq);
+		if (index < 0)
+			break;
+	}
+
+	return index;
+}
+
+static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 };
+
+static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
+				     struct cpufreq_frequency_table *table,
+				     size_t table_size)
+{
+	int ret;
+
+	WARN_ON(cfg->info == NULL);
+	WARN_ON(cfg->board == NULL);
+
+	ret = run_freq_for(cfg->info->max.hclk,
+			   cfg->info->max.fclk,
+			   hclk_divs,
+			   table, table_size);
+
+	s3c_freq_dbg("%s: returning %d\n", __func__, ret);
+
+	return ret;
+}
+
+struct s3c_cpufreq_info s3c2440_cpufreq_info = {
+	.max		= {
+		.fclk	= 400000000,
+		.hclk	= 133333333,
+		.pclk	=  66666666,
+	},
+
+	.locktime_m	= 300,
+	.locktime_u	= 300,
+	.locktime_bits	= 16,
+
+	.name		= "s3c244x",
+	.calc_iotiming	= s3c2410_iotiming_calc,
+	.set_iotiming	= s3c2410_iotiming_set,
+	.get_iotiming	= s3c2410_iotiming_get,
+	.set_fvco	= s3c2410_set_fvco,
+
+	.set_refresh	= s3c2410_cpufreq_setrefresh,
+	.set_divs	= s3c2440_cpufreq_setdivs,
+	.calc_divs	= s3c2440_cpufreq_calcdivs,
+	.calc_freqtable	= s3c2440_cpufreq_calctable,
+
+	.resume_clocks	= s3c244x_setup_clocks,
+
+	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
+};
+
+static int s3c2440_cpufreq_add(struct device *dev,
+			       struct subsys_interface *sif)
+{
+	xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+	hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+	fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+	armclk = s3c_cpufreq_clk_get(NULL, "armclk");
+
+	if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
+		printk(KERN_ERR "%s: failed to get clocks\n", __func__);
+		return -ENOENT;
+	}
+
+	return s3c_cpufreq_register(&s3c2440_cpufreq_info);
+}
+
+static struct subsys_interface s3c2440_cpufreq_interface = {
+	.name		= "s3c2440_cpufreq",
+	.subsys		= &s3c2440_subsys,
+	.add_dev	= s3c2440_cpufreq_add,
+};
+
+static int s3c2440_cpufreq_init(void)
+{
+	return subsys_interface_register(&s3c2440_cpufreq_interface);
+}
+
+/* arch_initcall adds the clocks we need, so use subsys_initcall. */
+subsys_initcall(s3c2440_cpufreq_init);
+
+static struct subsys_interface s3c2442_cpufreq_interface = {
+	.name		= "s3c2442_cpufreq",
+	.subsys		= &s3c2442_subsys,
+	.add_dev	= s3c2440_cpufreq_add,
+};
+
+static int s3c2442_cpufreq_init(void)
+{
+	return subsys_interface_register(&s3c2442_cpufreq_interface);
+}
+subsys_initcall(s3c2442_cpufreq_init);
diff --git a/arch/arm/mach-s3c24xx/cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c
new file mode 100644
index 0000000..ddd8280
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+#include "regs-mem.h"
+
+/**
+ * s3c2410_cpufreq_setrefresh - set SDRAM refresh value
+ * @cfg: The frequency configuration
+ *
+ * Set the SDRAM refresh value appropriately for the configured
+ * frequency.
+ */
+void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	unsigned long refresh;
+	unsigned long refval;
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * down to ensure that we do not overflow 32 bit numbers.
+	 *
+	 * This should work for HCLK up to 133MHz and refresh period up
+	 * to 30usec.
+	 */
+
+	refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+	refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
+	refresh = (1 << 11) + 1 - refresh;
+
+	s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh);
+
+	refval = __raw_readl(S3C2410_REFRESH);
+	refval &= ~((1 << 12) - 1);
+	refval |= refresh;
+	__raw_writel(refval, S3C2410_REFRESH);
+}
+
+/**
+ * s3c2410_set_fvco - set the PLL value
+ * @cfg: The frequency configuration
+ */
+void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
+{
+	__raw_writel(cfg->pll.index, S3C2410_MPLLCON);
+}
diff --git a/arch/arm/mach-s3c24xx/cpufreq.c b/arch/arm/mach-s3c24xx/cpufreq.c
new file mode 100644
index 0000000..5f181e7
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/cpufreq.c
@@ -0,0 +1,715 @@
+/*
+ * Copyright (c) 2006-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/cpu.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/slab.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+#include <mach/regs-clock.h>
+
+/* note, cpufreq support deals in kHz, no Hz */
+
+static struct cpufreq_driver s3c24xx_driver;
+static struct s3c_cpufreq_config cpu_cur;
+static struct s3c_iotimings s3c24xx_iotiming;
+static struct cpufreq_frequency_table *pll_reg;
+static unsigned int last_target = ~0;
+static unsigned int ftab_size;
+static struct cpufreq_frequency_table *ftab;
+
+static struct clk *_clk_mpll;
+static struct clk *_clk_xtal;
+static struct clk *clk_fclk;
+static struct clk *clk_hclk;
+static struct clk *clk_pclk;
+static struct clk *clk_arm;
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void)
+{
+	return &cpu_cur;
+}
+
+struct s3c_iotimings *s3c_cpufreq_getiotimings(void)
+{
+	return &s3c24xx_iotiming;
+}
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */
+
+static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long fclk, pclk, hclk, armclk;
+
+	cfg->freq.fclk = fclk = clk_get_rate(clk_fclk);
+	cfg->freq.hclk = hclk = clk_get_rate(clk_hclk);
+	cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
+	cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
+
+	cfg->pll.index = __raw_readl(S3C2410_MPLLCON);
+	cfg->pll.frequency = fclk;
+
+	cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+
+	cfg->divs.h_divisor = fclk / hclk;
+	cfg->divs.p_divisor = fclk / pclk;
+}
+
+static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long pll = cfg->pll.frequency;
+
+	cfg->freq.fclk = pll;
+	cfg->freq.hclk = pll / cfg->divs.h_divisor;
+	cfg->freq.pclk = pll / cfg->divs.p_divisor;
+
+	/* convert hclk into 10ths of nanoseconds for io calcs */
+	cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+}
+
+static inline int closer(unsigned int target, unsigned int n, unsigned int c)
+{
+	int diff_cur = abs(target - c);
+	int diff_new = abs(target - n);
+
+	return (diff_new < diff_cur);
+}
+
+static void s3c_cpufreq_show(const char *pfx,
+				 struct s3c_cpufreq_config *cfg)
+{
+	s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n",
+		     pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk,
+		     cfg->freq.hclk, cfg->divs.h_divisor,
+		     cfg->freq.pclk, cfg->divs.p_divisor);
+}
+
+/* functions to wrapper the driver info calls to do the cpu specific work */
+
+static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg)
+{
+	if (cfg->info->set_iotiming)
+		(cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming);
+}
+
+static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg)
+{
+	if (cfg->info->calc_iotiming)
+		return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming);
+
+	return 0;
+}
+
+static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	(cfg->info->set_refresh)(cfg);
+}
+
+static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	(cfg->info->set_divs)(cfg);
+}
+
+static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	return (cfg->info->calc_divs)(cfg);
+}
+
+static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
+{
+	(cfg->info->set_fvco)(cfg);
+}
+
+static inline void s3c_cpufreq_resume_clocks(void)
+{
+	cpu_cur.info->resume_clocks();
+}
+
+static inline void s3c_cpufreq_updateclk(struct clk *clk,
+					 unsigned int freq)
+{
+	clk_set_rate(clk, freq);
+}
+
+static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
+				 unsigned int target_freq,
+				 struct cpufreq_frequency_table *pll)
+{
+	struct s3c_cpufreq_freqs freqs;
+	struct s3c_cpufreq_config cpu_new;
+	unsigned long flags;
+
+	cpu_new = cpu_cur;  /* copy new from current */
+
+	s3c_cpufreq_show("cur", &cpu_cur);
+
+	/* TODO - check for DMA currently outstanding */
+
+	cpu_new.pll = pll ? *pll : cpu_cur.pll;
+
+	if (pll)
+		freqs.pll_changing = 1;
+
+	/* update our frequencies */
+
+	cpu_new.freq.armclk = target_freq;
+	cpu_new.freq.fclk = cpu_new.pll.frequency;
+
+	if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
+		printk(KERN_ERR "no divisors for %d\n", target_freq);
+		goto err_notpossible;
+	}
+
+	s3c_freq_dbg("%s: got divs\n", __func__);
+
+	s3c_cpufreq_calc(&cpu_new);
+
+	s3c_freq_dbg("%s: calculated frequencies for new\n", __func__);
+
+	if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
+		if (s3c_cpufreq_calcio(&cpu_new) < 0) {
+			printk(KERN_ERR "%s: no IO timings\n", __func__);
+			goto err_notpossible;
+		}
+	}
+
+	s3c_cpufreq_show("new", &cpu_new);
+
+	/* setup our cpufreq parameters */
+
+	freqs.old = cpu_cur.freq;
+	freqs.new = cpu_new.freq;
+
+	freqs.freqs.cpu = 0;
+	freqs.freqs.old = cpu_cur.freq.armclk / 1000;
+	freqs.freqs.new = cpu_new.freq.armclk / 1000;
+
+	/* update f/h/p clock settings before we issue the change
+	 * notification, so that drivers do not need to do anything
+	 * special if they want to recalculate on CPUFREQ_PRECHANGE. */
+
+	s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency);
+	s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk);
+	s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk);
+	s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
+
+	/* start the frequency change */
+
+	if (policy)
+		cpufreq_notify_transition(&freqs.freqs, CPUFREQ_PRECHANGE);
+
+	/* If hclk is staying the same, then we do not need to
+	 * re-write the IO or the refresh timings whilst we are changing
+	 * speed. */
+
+	local_irq_save(flags);
+
+	/* is our memory clock slowing down? */
+	if (cpu_new.freq.hclk < cpu_cur.freq.hclk) {
+		s3c_cpufreq_setrefresh(&cpu_new);
+		s3c_cpufreq_setio(&cpu_new);
+	}
+
+	if (cpu_new.freq.fclk == cpu_cur.freq.fclk) {
+		/* not changing PLL, just set the divisors */
+
+		s3c_cpufreq_setdivs(&cpu_new);
+	} else {
+		if (cpu_new.freq.fclk < cpu_cur.freq.fclk) {
+			/* slow the cpu down, then set divisors */
+
+			s3c_cpufreq_setfvco(&cpu_new);
+			s3c_cpufreq_setdivs(&cpu_new);
+		} else {
+			/* set the divisors, then speed up */
+
+			s3c_cpufreq_setdivs(&cpu_new);
+			s3c_cpufreq_setfvco(&cpu_new);
+		}
+	}
+
+	/* did our memory clock speed up */
+	if (cpu_new.freq.hclk > cpu_cur.freq.hclk) {
+		s3c_cpufreq_setrefresh(&cpu_new);
+		s3c_cpufreq_setio(&cpu_new);
+	}
+
+	/* update our current settings */
+	cpu_cur = cpu_new;
+
+	local_irq_restore(flags);
+
+	/* notify everyone we've done this */
+	if (policy)
+		cpufreq_notify_transition(&freqs.freqs, CPUFREQ_POSTCHANGE);
+
+	s3c_freq_dbg("%s: finished\n", __func__);
+	return 0;
+
+ err_notpossible:
+	printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+	return -EINVAL;
+}
+
+/* s3c_cpufreq_target
+ *
+ * called by the cpufreq core to adjust the frequency that the CPU
+ * is currently running at.
+ */
+
+static int s3c_cpufreq_target(struct cpufreq_policy *policy,
+			      unsigned int target_freq,
+			      unsigned int relation)
+{
+	struct cpufreq_frequency_table *pll;
+	unsigned int index;
+
+	/* avoid repeated calls which cause a needless amout of duplicated
+	 * logging output (and CPU time as the calculation process is
+	 * done) */
+	if (target_freq == last_target)
+		return 0;
+
+	last_target = target_freq;
+
+	s3c_freq_dbg("%s: policy %p, target %u, relation %u\n",
+		     __func__, policy, target_freq, relation);
+
+	if (ftab) {
+		if (cpufreq_frequency_table_target(policy, ftab,
+						   target_freq, relation,
+						   &index)) {
+			s3c_freq_dbg("%s: table failed\n", __func__);
+			return -EINVAL;
+		}
+
+		s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__,
+			     target_freq, index, ftab[index].frequency);
+		target_freq = ftab[index].frequency;
+	}
+
+	target_freq *= 1000;  /* convert target to Hz */
+
+	/* find the settings for our new frequency */
+
+	if (!pll_reg || cpu_cur.lock_pll) {
+		/* either we've not got any PLL values, or we've locked
+		 * to the current one. */
+		pll = NULL;
+	} else {
+		struct cpufreq_policy tmp_policy;
+		int ret;
+
+		/* we keep the cpu pll table in Hz, to ensure we get an
+		 * accurate value for the PLL output. */
+
+		tmp_policy.min = policy->min * 1000;
+		tmp_policy.max = policy->max * 1000;
+		tmp_policy.cpu = policy->cpu;
+
+		/* cpufreq_frequency_table_target uses a pointer to 'index'
+		 * which is the number of the table entry, not the value of
+		 * the table entry's index field. */
+
+		ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg,
+						     target_freq, relation,
+						     &index);
+
+		if (ret < 0) {
+			printk(KERN_ERR "%s: no PLL available\n", __func__);
+			goto err_notpossible;
+		}
+
+		pll = pll_reg + index;
+
+		s3c_freq_dbg("%s: target %u => %u\n",
+			     __func__, target_freq, pll->frequency);
+
+		target_freq = pll->frequency;
+	}
+
+	return s3c_cpufreq_settarget(policy, target_freq, pll);
+
+ err_notpossible:
+	printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+	return -EINVAL;
+}
+
+static unsigned int s3c_cpufreq_get(unsigned int cpu)
+{
+	return clk_get_rate(clk_arm) / 1000;
+}
+
+struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
+{
+	struct clk *clk;
+
+	clk = clk_get(dev, name);
+	if (IS_ERR(clk))
+		printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
+
+	return clk;
+}
+
+static int s3c_cpufreq_init(struct cpufreq_policy *policy)
+{
+	printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy);
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	policy->cur = s3c_cpufreq_get(0);
+	policy->min = policy->cpuinfo.min_freq = 0;
+	policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000;
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+	/* feed the latency information from the cpu driver */
+	policy->cpuinfo.transition_latency = cpu_cur.info->latency;
+
+	if (ftab)
+		cpufreq_frequency_table_cpuinfo(policy, ftab);
+
+	return 0;
+}
+
+static __init int s3c_cpufreq_initclks(void)
+{
+	_clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll");
+	_clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+	clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+	clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+	clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk");
+	clk_arm = s3c_cpufreq_clk_get(NULL, "armclk");
+
+	if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
+	    IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
+		printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
+		return -ENOENT;
+	}
+
+	printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
+	       clk_get_rate(clk_fclk) / 1000,
+	       clk_get_rate(clk_hclk) / 1000,
+	       clk_get_rate(clk_pclk) / 1000,
+	       clk_get_rate(clk_arm) / 1000);
+
+	return 0;
+}
+
+static int s3c_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static struct cpufreq_frequency_table suspend_pll;
+static unsigned int suspend_freq;
+
+static int s3c_cpufreq_suspend(struct cpufreq_policy *policy)
+{
+	suspend_pll.frequency = clk_get_rate(_clk_mpll);
+	suspend_pll.index = __raw_readl(S3C2410_MPLLCON);
+	suspend_freq = s3c_cpufreq_get(0) * 1000;
+
+	return 0;
+}
+
+static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
+{
+	int ret;
+
+	s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy);
+
+	last_target = ~0;	/* invalidate last_target setting */
+
+	/* first, find out what speed we resumed at. */
+	s3c_cpufreq_resume_clocks();
+
+	/* whilst we will be called later on, we try and re-set the
+	 * cpu frequencies as soon as possible so that we do not end
+	 * up resuming devices and then immediately having to re-set
+	 * a number of settings once these devices have restarted.
+	 *
+	 * as a note, it is expected devices are not used until they
+	 * have been un-suspended and at that time they should have
+	 * used the updated clock settings.
+	 */
+
+	ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+#else
+#define s3c_cpufreq_resume NULL
+#define s3c_cpufreq_suspend NULL
+#endif
+
+static struct cpufreq_driver s3c24xx_driver = {
+	.flags		= CPUFREQ_STICKY,
+	.verify		= s3c_cpufreq_verify,
+	.target		= s3c_cpufreq_target,
+	.get		= s3c_cpufreq_get,
+	.init		= s3c_cpufreq_init,
+	.suspend	= s3c_cpufreq_suspend,
+	.resume		= s3c_cpufreq_resume,
+	.name		= "s3c24xx",
+};
+
+
+int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info)
+{
+	if (!info || !info->name) {
+		printk(KERN_ERR "%s: failed to pass valid information\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
+	       info->name);
+
+	/* check our driver info has valid data */
+
+	BUG_ON(info->set_refresh == NULL);
+	BUG_ON(info->set_divs == NULL);
+	BUG_ON(info->calc_divs == NULL);
+
+	/* info->set_fvco is optional, depending on whether there
+	 * is a need to set the clock code. */
+
+	cpu_cur.info = info;
+
+	/* Note, driver registering should probably update locktime */
+
+	return 0;
+}
+
+int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
+{
+	struct s3c_cpufreq_board *ours;
+
+	if (!board) {
+		printk(KERN_INFO "%s: no board data\n", __func__);
+		return -EINVAL;
+	}
+
+	/* Copy the board information so that each board can make this
+	 * initdata. */
+
+	ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL);
+	if (ours == NULL) {
+		printk(KERN_ERR "%s: no memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	*ours = *board;
+	cpu_cur.board = ours;
+
+	return 0;
+}
+
+int __init s3c_cpufreq_auto_io(void)
+{
+	int ret;
+
+	if (!cpu_cur.info->get_iotiming) {
+		printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
+		return -ENOENT;
+	}
+
+	printk(KERN_INFO "%s: working out IO settings\n", __func__);
+
+	ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
+	if (ret)
+		printk(KERN_ERR "%s: failed to get timings\n", __func__);
+
+	return ret;
+}
+
+/* if one or is zero, then return the other, otherwise return the min */
+#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b))
+
+/**
+ * s3c_cpufreq_freq_min - find the minimum settings for the given freq.
+ * @dst: The destination structure
+ * @a: One argument.
+ * @b: The other argument.
+ *
+ * Create a minimum of each frequency entry in the 'struct s3c_freq',
+ * unless the entry is zero when it is ignored and the non-zero argument
+ * used.
+ */
+static void s3c_cpufreq_freq_min(struct s3c_freq *dst,
+				 struct s3c_freq *a, struct s3c_freq *b)
+{
+	dst->fclk = do_min(a->fclk, b->fclk);
+	dst->hclk = do_min(a->hclk, b->hclk);
+	dst->pclk = do_min(a->pclk, b->pclk);
+	dst->armclk = do_min(a->armclk, b->armclk);
+}
+
+static inline u32 calc_locktime(u32 freq, u32 time_us)
+{
+	u32 result;
+
+	result = freq * time_us;
+	result = DIV_ROUND_UP(result, 1000 * 1000);
+
+	return result;
+}
+
+static void s3c_cpufreq_update_loctkime(void)
+{
+	unsigned int bits = cpu_cur.info->locktime_bits;
+	u32 rate = (u32)clk_get_rate(_clk_xtal);
+	u32 val;
+
+	if (bits == 0) {
+		WARN_ON(1);
+		return;
+	}
+
+	val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
+	val |= calc_locktime(rate, cpu_cur.info->locktime_m);
+
+	printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
+	__raw_writel(val, S3C2410_LOCKTIME);
+}
+
+static int s3c_cpufreq_build_freq(void)
+{
+	int size, ret;
+
+	if (!cpu_cur.info->calc_freqtable)
+		return -EINVAL;
+
+	kfree(ftab);
+	ftab = NULL;
+
+	size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
+	size++;
+
+	ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL);
+	if (!ftab) {
+		printk(KERN_ERR "%s: no memory for tables\n", __func__);
+		return -ENOMEM;
+	}
+
+	ftab_size = size;
+
+	ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size);
+	s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END);
+
+	return 0;
+}
+
+static int __init s3c_cpufreq_initcall(void)
+{
+	int ret = 0;
+
+	if (cpu_cur.info && cpu_cur.board) {
+		ret = s3c_cpufreq_initclks();
+		if (ret)
+			goto out;
+
+		/* get current settings */
+		s3c_cpufreq_getcur(&cpu_cur);
+		s3c_cpufreq_show("cur", &cpu_cur);
+
+		if (cpu_cur.board->auto_io) {
+			ret = s3c_cpufreq_auto_io();
+			if (ret) {
+				printk(KERN_ERR "%s: failed to get io timing\n",
+				       __func__);
+				goto out;
+			}
+		}
+
+		if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
+			printk(KERN_ERR "%s: no IO support registered\n",
+			       __func__);
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (!cpu_cur.info->need_pll)
+			cpu_cur.lock_pll = 1;
+
+		s3c_cpufreq_update_loctkime();
+
+		s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max,
+				     &cpu_cur.info->max);
+
+		if (cpu_cur.info->calc_freqtable)
+			s3c_cpufreq_build_freq();
+
+		ret = cpufreq_register_driver(&s3c24xx_driver);
+	}
+
+ out:
+	return ret;
+}
+
+late_initcall(s3c_cpufreq_initcall);
+
+/**
+ * s3c_plltab_register - register CPU PLL table.
+ * @plls: The list of PLL entries.
+ * @plls_no: The size of the PLL entries @plls.
+ *
+ * Register the given set of PLLs with the system.
+ */
+int __init s3c_plltab_register(struct cpufreq_frequency_table *plls,
+			       unsigned int plls_no)
+{
+	struct cpufreq_frequency_table *vals;
+	unsigned int size;
+
+	size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1);
+
+	vals = kmalloc(size, GFP_KERNEL);
+	if (vals) {
+		memcpy(vals, plls, size);
+		pll_reg = vals;
+
+		/* write a terminating entry, we don't store it in the
+		 * table that is stored in the kernel */
+		vals += plls_no;
+		vals->frequency = CPUFREQ_TABLE_END;
+
+		printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
+	} else
+		printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
+
+	return vals ? 0 : -ENOMEM;
+}
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2410.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c
index 4803338..25d085a 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2410.c
@@ -27,7 +27,6 @@
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
 #include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
 #include <plat/regs-iis.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2412.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c
index 38472ac..d2408ba 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2412.c
@@ -27,7 +27,6 @@
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
 #include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
 #include <plat/regs-iis.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2440.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c
index 5f0a0c8..0b86e74 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2440.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2440.c
@@ -27,7 +27,6 @@
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
 #include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
 #include <plat/regs-iis.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c
index 2d94228..0553625 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c
@@ -27,7 +27,6 @@
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
 #include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
 #include <plat/regs-iis.h>
diff --git a/arch/arm/mach-s3c24xx/dma.c b/arch/arm/mach-s3c24xx/dma.c
new file mode 100644
index 0000000..aab6490
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/dma.c
@@ -0,0 +1,1468 @@
+/*
+ * Copyright 2003-2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 DMA core
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifdef CONFIG_S3C2410_DMA_DEBUG
+#define DEBUG
+#endif
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/syscore_ops.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <mach/dma.h>
+#include <mach/map.h>
+
+#include <plat/dma-s3c24xx.h>
+#include <plat/regs-dma.h>
+
+/* io map for dma */
+static void __iomem *dma_base;
+static struct kmem_cache *dma_kmem;
+
+static int dma_channels;
+
+static struct s3c24xx_dma_selection dma_sel;
+
+
+/* debugging functions */
+
+#define BUF_MAGIC (0xcafebabe)
+
+#define dmawarn(fmt...) printk(KERN_DEBUG fmt)
+
+#define dma_regaddr(chan, reg) ((chan)->regs + (reg))
+
+#if 1
+#define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg))
+#else
+static inline void
+dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val)
+{
+	pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg);
+	writel(val, dma_regaddr(chan, reg));
+}
+#endif
+
+#define dma_rdreg(chan, reg) readl((chan)->regs + (reg))
+
+/* captured register state for debug */
+
+struct s3c2410_dma_regstate {
+	unsigned long         dcsrc;
+	unsigned long         disrc;
+	unsigned long         dstat;
+	unsigned long         dcon;
+	unsigned long         dmsktrig;
+};
+
+#ifdef CONFIG_S3C2410_DMA_DEBUG
+
+/* dmadbg_showregs
+ *
+ * simple debug routine to print the current state of the dma registers
+*/
+
+static void
+dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs)
+{
+	regs->dcsrc    = dma_rdreg(chan, S3C2410_DMA_DCSRC);
+	regs->disrc    = dma_rdreg(chan, S3C2410_DMA_DISRC);
+	regs->dstat    = dma_rdreg(chan, S3C2410_DMA_DSTAT);
+	regs->dcon     = dma_rdreg(chan, S3C2410_DMA_DCON);
+	regs->dmsktrig = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+}
+
+static void
+dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan,
+		 struct s3c2410_dma_regstate *regs)
+{
+	printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n",
+	       chan->number, fname, line,
+	       regs->dcsrc, regs->disrc, regs->dstat, regs->dmsktrig,
+	       regs->dcon);
+}
+
+static void
+dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan)
+{
+	struct s3c2410_dma_regstate state;
+
+	dmadbg_capture(chan, &state);
+
+	printk(KERN_DEBUG "dma%d: %s:%d: ls=%d, cur=%p, %p %p\n",
+	       chan->number, fname, line, chan->load_state,
+	       chan->curr, chan->next, chan->end);
+
+	dmadbg_dumpregs(fname, line, chan, &state);
+}
+
+static void
+dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
+{
+	struct s3c2410_dma_regstate state;
+
+	dmadbg_capture(chan, &state);
+	dmadbg_dumpregs(fname, line, chan, &state);
+}
+
+#define dbg_showregs(chan) dmadbg_showregs(__func__, __LINE__, (chan))
+#define dbg_showchan(chan) dmadbg_showchan(__func__, __LINE__, (chan))
+#else
+#define dbg_showregs(chan) do { } while(0)
+#define dbg_showchan(chan) do { } while(0)
+#endif /* CONFIG_S3C2410_DMA_DEBUG */
+
+/* s3c2410_dma_stats_timeout
+ *
+ * Update DMA stats from timeout info
+*/
+
+static void
+s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val)
+{
+	if (stats == NULL)
+		return;
+
+	if (val > stats->timeout_longest)
+		stats->timeout_longest = val;
+	if (val < stats->timeout_shortest)
+		stats->timeout_shortest = val;
+
+	stats->timeout_avg += val;
+}
+
+/* s3c2410_dma_waitforload
+ *
+ * wait for the DMA engine to load a buffer, and update the state accordingly
+*/
+
+static int
+s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
+{
+	int timeout = chan->load_timeout;
+	int took;
+
+	if (chan->load_state != S3C2410_DMALOAD_1LOADED) {
+		printk(KERN_ERR "dma%d: s3c2410_dma_waitforload() called in loadstate %d from line %d\n", chan->number, chan->load_state, line);
+		return 0;
+	}
+
+	if (chan->stats != NULL)
+		chan->stats->loads++;
+
+	while (--timeout > 0) {
+		if ((dma_rdreg(chan, S3C2410_DMA_DSTAT) << (32-20)) != 0) {
+			took = chan->load_timeout - timeout;
+
+			s3c2410_dma_stats_timeout(chan->stats, took);
+
+			switch (chan->load_state) {
+			case S3C2410_DMALOAD_1LOADED:
+				chan->load_state = S3C2410_DMALOAD_1RUNNING;
+				break;
+
+			default:
+				printk(KERN_ERR "dma%d: unknown load_state in s3c2410_dma_waitforload() %d\n", chan->number, chan->load_state);
+			}
+
+			return 1;
+		}
+	}
+
+	if (chan->stats != NULL) {
+		chan->stats->timeout_failed++;
+	}
+
+	return 0;
+}
+
+/* s3c2410_dma_loadbuffer
+ *
+ * load a buffer, and update the channel state
+*/
+
+static inline int
+s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
+		       struct s3c2410_dma_buf *buf)
+{
+	unsigned long reload;
+
+	if (buf == NULL) {
+		dmawarn("buffer is NULL\n");
+		return -EINVAL;
+	}
+
+	pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
+		 buf, (unsigned long)buf->data, buf->size);
+
+	/* check the state of the channel before we do anything */
+
+	if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
+		dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n");
+	}
+
+	if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) {
+		dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n");
+	}
+
+	/* it would seem sensible if we are the last buffer to not bother
+	 * with the auto-reload bit, so that the DMA engine will not try
+	 * and load another transfer after this one has finished...
+	 */
+	if (chan->load_state == S3C2410_DMALOAD_NONE) {
+		pr_debug("load_state is none, checking for noreload (next=%p)\n",
+			 buf->next);
+		reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0;
+	} else {
+		//pr_debug("load_state is %d => autoreload\n", chan->load_state);
+		reload = S3C2410_DCON_AUTORELOAD;
+	}
+
+	if ((buf->data & 0xf0000000) != 0x30000000) {
+		dmawarn("dmaload: buffer is %p\n", (void *)buf->data);
+	}
+
+	writel(buf->data, chan->addr_reg);
+
+	dma_wrreg(chan, S3C2410_DMA_DCON,
+		  chan->dcon | reload | (buf->size/chan->xfer_unit));
+
+	chan->next = buf->next;
+
+	/* update the state of the channel */
+
+	switch (chan->load_state) {
+	case S3C2410_DMALOAD_NONE:
+		chan->load_state = S3C2410_DMALOAD_1LOADED;
+		break;
+
+	case S3C2410_DMALOAD_1RUNNING:
+		chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING;
+		break;
+
+	default:
+		dmawarn("dmaload: unknown state %d in loadbuffer\n",
+			chan->load_state);
+		break;
+	}
+
+	return 0;
+}
+
+/* s3c2410_dma_call_op
+ *
+ * small routine to call the op routine with the given op if it has been
+ * registered
+*/
+
+static void
+s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op)
+{
+	if (chan->op_fn != NULL) {
+		(chan->op_fn)(chan, op);
+	}
+}
+
+/* s3c2410_dma_buffdone
+ *
+ * small wrapper to check if callback routine needs to be called, and
+ * if so, call it
+*/
+
+static inline void
+s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf,
+		     enum s3c2410_dma_buffresult result)
+{
+#if 0
+	pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n",
+		 chan->callback_fn, buf, buf->id, buf->size, result);
+#endif
+
+	if (chan->callback_fn != NULL) {
+		(chan->callback_fn)(chan, buf->id, buf->size, result);
+	}
+}
+
+/* s3c2410_dma_start
+ *
+ * start a dma channel going
+*/
+
+static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
+{
+	unsigned long tmp;
+	unsigned long flags;
+
+	pr_debug("s3c2410_start_dma: channel=%d\n", chan->number);
+
+	local_irq_save(flags);
+
+	if (chan->state == S3C2410_DMA_RUNNING) {
+		pr_debug("s3c2410_start_dma: already running (%d)\n", chan->state);
+		local_irq_restore(flags);
+		return 0;
+	}
+
+	chan->state = S3C2410_DMA_RUNNING;
+
+	/* check whether there is anything to load, and if not, see
+	 * if we can find anything to load
+	 */
+
+	if (chan->load_state == S3C2410_DMALOAD_NONE) {
+		if (chan->next == NULL) {
+			printk(KERN_ERR "dma%d: channel has nothing loaded\n",
+			       chan->number);
+			chan->state = S3C2410_DMA_IDLE;
+			local_irq_restore(flags);
+			return -EINVAL;
+		}
+
+		s3c2410_dma_loadbuffer(chan, chan->next);
+	}
+
+	dbg_showchan(chan);
+
+	/* enable the channel */
+
+	if (!chan->irq_enabled) {
+		enable_irq(chan->irq);
+		chan->irq_enabled = 1;
+	}
+
+	/* start the channel going */
+
+	tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+	tmp &= ~S3C2410_DMASKTRIG_STOP;
+	tmp |= S3C2410_DMASKTRIG_ON;
+	dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
+
+	pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp);
+
+#if 0
+	/* the dma buffer loads should take care of clearing the AUTO
+	 * reloading feature */
+	tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
+	tmp &= ~S3C2410_DCON_NORELOAD;
+	dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
+#endif
+
+	s3c2410_dma_call_op(chan, S3C2410_DMAOP_START);
+
+	dbg_showchan(chan);
+
+	/* if we've only loaded one buffer onto the channel, then chec
+	 * to see if we have another, and if so, try and load it so when
+	 * the first buffer is finished, the new one will be loaded onto
+	 * the channel */
+
+	if (chan->next != NULL) {
+		if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
+
+			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+				pr_debug("%s: buff not yet loaded, no more todo\n",
+					 __func__);
+			} else {
+				chan->load_state = S3C2410_DMALOAD_1RUNNING;
+				s3c2410_dma_loadbuffer(chan, chan->next);
+			}
+
+		} else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
+			s3c2410_dma_loadbuffer(chan, chan->next);
+		}
+	}
+
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+/* s3c2410_dma_canload
+ *
+ * work out if we can queue another buffer into the DMA engine
+*/
+
+static int
+s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
+{
+	if (chan->load_state == S3C2410_DMALOAD_NONE ||
+	    chan->load_state == S3C2410_DMALOAD_1RUNNING)
+		return 1;
+
+	return 0;
+}
+
+/* s3c2410_dma_enqueue
+ *
+ * queue an given buffer for dma transfer.
+ *
+ * id         the device driver's id information for this buffer
+ * data       the physical address of the buffer data
+ * size       the size of the buffer in bytes
+ *
+ * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART
+ * is checked, and if set, the channel is started. If this flag isn't set,
+ * then an error will be returned.
+ *
+ * It is possible to queue more than one DMA buffer onto a channel at
+ * once, and the code will deal with the re-loading of the next buffer
+ * when necessary.
+*/
+
+int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
+			dma_addr_t data, int size)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	struct s3c2410_dma_buf *buf;
+	unsigned long flags;
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: id=%p, data=%08x, size=%d\n",
+		 __func__, id, (unsigned int)data, size);
+
+	buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC);
+	if (buf == NULL) {
+		pr_debug("%s: out of memory (%ld alloc)\n",
+			 __func__, (long)sizeof(*buf));
+		return -ENOMEM;
+	}
+
+	//pr_debug("%s: new buffer %p\n", __func__, buf);
+	//dbg_showchan(chan);
+
+	buf->next  = NULL;
+	buf->data  = buf->ptr = data;
+	buf->size  = size;
+	buf->id    = id;
+	buf->magic = BUF_MAGIC;
+
+	local_irq_save(flags);
+
+	if (chan->curr == NULL) {
+		/* we've got nothing loaded... */
+		pr_debug("%s: buffer %p queued onto empty channel\n",
+			 __func__, buf);
+
+		chan->curr = buf;
+		chan->end  = buf;
+		chan->next = NULL;
+	} else {
+		pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
+			 chan->number, __func__, buf);
+
+		if (chan->end == NULL) {
+			pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
+				 chan->number, __func__, chan);
+		} else {
+			chan->end->next = buf;
+			chan->end = buf;
+		}
+	}
+
+	/* if necessary, update the next buffer field */
+	if (chan->next == NULL)
+		chan->next = buf;
+
+	/* check to see if we can load a buffer */
+	if (chan->state == S3C2410_DMA_RUNNING) {
+		if (chan->load_state == S3C2410_DMALOAD_1LOADED && 1) {
+			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+				printk(KERN_ERR "dma%d: loadbuffer:"
+				       "timeout loading buffer\n",
+				       chan->number);
+				dbg_showchan(chan);
+				local_irq_restore(flags);
+				return -EINVAL;
+			}
+		}
+
+		while (s3c2410_dma_canload(chan) && chan->next != NULL) {
+			s3c2410_dma_loadbuffer(chan, chan->next);
+		}
+	} else if (chan->state == S3C2410_DMA_IDLE) {
+		if (chan->flags & S3C2410_DMAF_AUTOSTART) {
+			s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
+					 S3C2410_DMAOP_START);
+		}
+	}
+
+	local_irq_restore(flags);
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_enqueue);
+
+static inline void
+s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf)
+{
+	int magicok = (buf->magic == BUF_MAGIC);
+
+	buf->magic = -1;
+
+	if (magicok) {
+		kmem_cache_free(dma_kmem, buf);
+	} else {
+		printk("s3c2410_dma_freebuf: buff %p with bad magic\n", buf);
+	}
+}
+
+/* s3c2410_dma_lastxfer
+ *
+ * called when the system is out of buffers, to ensure that the channel
+ * is prepared for shutdown.
+*/
+
+static inline void
+s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
+{
+#if 0
+	pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n",
+		 chan->number, chan->load_state);
+#endif
+
+	switch (chan->load_state) {
+	case S3C2410_DMALOAD_NONE:
+		break;
+
+	case S3C2410_DMALOAD_1LOADED:
+		if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+				/* flag error? */
+			printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
+			       chan->number, __func__);
+			return;
+		}
+		break;
+
+	case S3C2410_DMALOAD_1LOADED_1RUNNING:
+		/* I believe in this case we do not have anything to do
+		 * until the next buffer comes along, and we turn off the
+		 * reload */
+		return;
+
+	default:
+		pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n",
+			 chan->number, chan->load_state);
+		return;
+
+	}
+
+	/* hopefully this'll shut the damned thing up after the transfer... */
+	dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD);
+}
+
+
+#define dmadbg2(x...)
+
+static irqreturn_t
+s3c2410_dma_irq(int irq, void *devpw)
+{
+	struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw;
+	struct s3c2410_dma_buf  *buf;
+
+	buf = chan->curr;
+
+	dbg_showchan(chan);
+
+	/* modify the channel state */
+
+	switch (chan->load_state) {
+	case S3C2410_DMALOAD_1RUNNING:
+		/* TODO - if we are running only one buffer, we probably
+		 * want to reload here, and then worry about the buffer
+		 * callback */
+
+		chan->load_state = S3C2410_DMALOAD_NONE;
+		break;
+
+	case S3C2410_DMALOAD_1LOADED:
+		/* iirc, we should go back to NONE loaded here, we
+		 * had a buffer, and it was never verified as being
+		 * loaded.
+		 */
+
+		chan->load_state = S3C2410_DMALOAD_NONE;
+		break;
+
+	case S3C2410_DMALOAD_1LOADED_1RUNNING:
+		/* we'll worry about checking to see if another buffer is
+		 * ready after we've called back the owner. This should
+		 * ensure we do not wait around too long for the DMA
+		 * engine to start the next transfer
+		 */
+
+		chan->load_state = S3C2410_DMALOAD_1LOADED;
+		break;
+
+	case S3C2410_DMALOAD_NONE:
+		printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n",
+		       chan->number);
+		break;
+
+	default:
+		printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n",
+		       chan->number, chan->load_state);
+		break;
+	}
+
+	if (buf != NULL) {
+		/* update the chain to make sure that if we load any more
+		 * buffers when we call the callback function, things should
+		 * work properly */
+
+		chan->curr = buf->next;
+		buf->next  = NULL;
+
+		if (buf->magic != BUF_MAGIC) {
+			printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n",
+			       chan->number, __func__, buf);
+			return IRQ_HANDLED;
+		}
+
+		s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK);
+
+		/* free resouces */
+		s3c2410_dma_freebuf(buf);
+	} else {
+	}
+
+	/* only reload if the channel is still running... our buffer done
+	 * routine may have altered the state by requesting the dma channel
+	 * to stop or shutdown... */
+
+	/* todo: check that when the channel is shut-down from inside this
+	 * function, we cope with unsetting reload, etc */
+
+	if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) {
+		unsigned long flags;
+
+		switch (chan->load_state) {
+		case S3C2410_DMALOAD_1RUNNING:
+			/* don't need to do anything for this state */
+			break;
+
+		case S3C2410_DMALOAD_NONE:
+			/* can load buffer immediately */
+			break;
+
+		case S3C2410_DMALOAD_1LOADED:
+			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+				/* flag error? */
+				printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
+				       chan->number, __func__);
+				return IRQ_HANDLED;
+			}
+
+			break;
+
+		case S3C2410_DMALOAD_1LOADED_1RUNNING:
+			goto no_load;
+
+		default:
+			printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n",
+			       chan->number, chan->load_state);
+			return IRQ_HANDLED;
+		}
+
+		local_irq_save(flags);
+		s3c2410_dma_loadbuffer(chan, chan->next);
+		local_irq_restore(flags);
+	} else {
+		s3c2410_dma_lastxfer(chan);
+
+		/* see if we can stop this channel.. */
+		if (chan->load_state == S3C2410_DMALOAD_NONE) {
+			pr_debug("dma%d: end of transfer, stopping channel (%ld)\n",
+				 chan->number, jiffies);
+			s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
+					 S3C2410_DMAOP_STOP);
+		}
+	}
+
+ no_load:
+	return IRQ_HANDLED;
+}
+
+static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel);
+
+/* s3c2410_request_dma
+ *
+ * get control of an dma channel
+*/
+
+int s3c2410_dma_request(enum dma_ch channel,
+			struct s3c2410_dma_client *client,
+			void *dev)
+{
+	struct s3c2410_dma_chan *chan;
+	unsigned long flags;
+	int err;
+
+	pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
+		 channel, client->name, dev);
+
+	local_irq_save(flags);
+
+	chan = s3c2410_dma_map_channel(channel);
+	if (chan == NULL) {
+		local_irq_restore(flags);
+		return -EBUSY;
+	}
+
+	dbg_showchan(chan);
+
+	chan->client = client;
+	chan->in_use = 1;
+
+	if (!chan->irq_claimed) {
+		pr_debug("dma%d: %s : requesting irq %d\n",
+			 channel, __func__, chan->irq);
+
+		chan->irq_claimed = 1;
+		local_irq_restore(flags);
+
+		err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED,
+				  client->name, (void *)chan);
+
+		local_irq_save(flags);
+
+		if (err) {
+			chan->in_use = 0;
+			chan->irq_claimed = 0;
+			local_irq_restore(flags);
+
+			printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n",
+			       client->name, chan->irq, chan->number);
+			return err;
+		}
+
+		chan->irq_enabled = 1;
+	}
+
+	local_irq_restore(flags);
+
+	/* need to setup */
+
+	pr_debug("%s: channel initialised, %p\n", __func__, chan);
+
+	return chan->number | DMACH_LOW_LEVEL;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_request);
+
+/* s3c2410_dma_free
+ *
+ * release the given channel back to the system, will stop and flush
+ * any outstanding transfers, and ensure the channel is ready for the
+ * next claimant.
+ *
+ * Note, although a warning is currently printed if the freeing client
+ * info is not the same as the registrant's client info, the free is still
+ * allowed to go through.
+*/
+
+int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	unsigned long flags;
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	if (chan->client != client) {
+		printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
+		       channel, chan->client, client);
+	}
+
+	/* sort out stopping and freeing the channel */
+
+	if (chan->state != S3C2410_DMA_IDLE) {
+		pr_debug("%s: need to stop dma channel %p\n",
+		       __func__, chan);
+
+		/* possibly flush the channel */
+		s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP);
+	}
+
+	chan->client = NULL;
+	chan->in_use = 0;
+
+	if (chan->irq_claimed)
+		free_irq(chan->irq, (void *)chan);
+
+	chan->irq_claimed = 0;
+
+	if (!(channel & DMACH_LOW_LEVEL))
+		s3c_dma_chan_map[channel] = NULL;
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_free);
+
+static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
+{
+	unsigned long flags;
+	unsigned long tmp;
+
+	pr_debug("%s:\n", __func__);
+
+	dbg_showchan(chan);
+
+	local_irq_save(flags);
+
+	s3c2410_dma_call_op(chan,  S3C2410_DMAOP_STOP);
+
+	tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+	tmp |= S3C2410_DMASKTRIG_STOP;
+	//tmp &= ~S3C2410_DMASKTRIG_ON;
+	dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
+
+#if 0
+	/* should also clear interrupts, according to WinCE BSP */
+	tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
+	tmp |= S3C2410_DCON_NORELOAD;
+	dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
+#endif
+
+	/* should stop do this, or should we wait for flush? */
+	chan->state      = S3C2410_DMA_IDLE;
+	chan->load_state = S3C2410_DMALOAD_NONE;
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan)
+{
+	unsigned long tmp;
+	unsigned int timeout = 0x10000;
+
+	while (timeout-- > 0) {
+		tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+
+		if (!(tmp & S3C2410_DMASKTRIG_ON))
+			return;
+	}
+
+	pr_debug("dma%d: failed to stop?\n", chan->number);
+}
+
+
+/* s3c2410_dma_flush
+ *
+ * stop the channel, and remove all current and pending transfers
+*/
+
+static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
+{
+	struct s3c2410_dma_buf *buf, *next;
+	unsigned long flags;
+
+	pr_debug("%s: chan %p (%d)\n", __func__, chan, chan->number);
+
+	dbg_showchan(chan);
+
+	local_irq_save(flags);
+
+	if (chan->state != S3C2410_DMA_IDLE) {
+		pr_debug("%s: stopping channel...\n", __func__ );
+		s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP);
+	}
+
+	buf = chan->curr;
+	if (buf == NULL)
+		buf = chan->next;
+
+	chan->curr = chan->next = chan->end = NULL;
+
+	if (buf != NULL) {
+		for ( ; buf != NULL; buf = next) {
+			next = buf->next;
+
+			pr_debug("%s: free buffer %p, next %p\n",
+			       __func__, buf, buf->next);
+
+			s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT);
+			s3c2410_dma_freebuf(buf);
+		}
+	}
+
+	dbg_showregs(chan);
+
+	s3c2410_dma_waitforstop(chan);
+
+#if 0
+	/* should also clear interrupts, according to WinCE BSP */
+	{
+		unsigned long tmp;
+
+		tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
+		tmp |= S3C2410_DCON_NORELOAD;
+		dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
+	}
+#endif
+
+	dbg_showregs(chan);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int s3c2410_dma_started(struct s3c2410_dma_chan *chan)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	dbg_showchan(chan);
+
+	/* if we've only loaded one buffer onto the channel, then chec
+	 * to see if we have another, and if so, try and load it so when
+	 * the first buffer is finished, the new one will be loaded onto
+	 * the channel */
+
+	if (chan->next != NULL) {
+		if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
+
+			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+				pr_debug("%s: buff not yet loaded, no more todo\n",
+					 __func__);
+			} else {
+				chan->load_state = S3C2410_DMALOAD_1RUNNING;
+				s3c2410_dma_loadbuffer(chan, chan->next);
+			}
+
+		} else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
+			s3c2410_dma_loadbuffer(chan, chan->next);
+		}
+	}
+
+
+	local_irq_restore(flags);
+
+	return 0;
+
+}
+
+int
+s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	switch (op) {
+	case S3C2410_DMAOP_START:
+		return s3c2410_dma_start(chan);
+
+	case S3C2410_DMAOP_STOP:
+		return s3c2410_dma_dostop(chan);
+
+	case S3C2410_DMAOP_PAUSE:
+	case S3C2410_DMAOP_RESUME:
+		return -ENOENT;
+
+	case S3C2410_DMAOP_FLUSH:
+		return s3c2410_dma_flush(chan);
+
+	case S3C2410_DMAOP_STARTED:
+		return s3c2410_dma_started(chan);
+
+	case S3C2410_DMAOP_TIMEOUT:
+		return 0;
+
+	}
+
+	return -ENOENT;      /* unknown, don't bother */
+}
+
+EXPORT_SYMBOL(s3c2410_dma_ctrl);
+
+/* DMA configuration for each channel
+ *
+ * DISRCC -> source of the DMA (AHB,APB)
+ * DISRC  -> source address of the DMA
+ * DIDSTC -> destination of the DMA (AHB,APD)
+ * DIDST  -> destination address of the DMA
+*/
+
+/* s3c2410_dma_config
+ *
+ * xfersize:     size of unit in bytes (1,2,4)
+*/
+
+int s3c2410_dma_config(enum dma_ch channel,
+		       int xferunit)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	unsigned int dcon;
+
+	pr_debug("%s: chan=%d, xfer_unit=%d\n", __func__, channel, xferunit);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	dcon = chan->dcon & dma_sel.dcon_mask;
+	pr_debug("%s: dcon is %08x\n", __func__, dcon);
+
+	switch (chan->req_ch) {
+	case DMACH_I2S_IN:
+	case DMACH_I2S_OUT:
+	case DMACH_PCM_IN:
+	case DMACH_PCM_OUT:
+	case DMACH_MIC_IN:
+	default:
+		dcon |= S3C2410_DCON_HANDSHAKE;
+		dcon |= S3C2410_DCON_SYNC_PCLK;
+		break;
+
+	case DMACH_SDI:
+		/* note, ensure if need HANDSHAKE or not */
+		dcon |= S3C2410_DCON_SYNC_PCLK;
+		break;
+
+	case DMACH_XD0:
+	case DMACH_XD1:
+		dcon |= S3C2410_DCON_HANDSHAKE;
+		dcon |= S3C2410_DCON_SYNC_HCLK;
+		break;
+	}
+
+	switch (xferunit) {
+	case 1:
+		dcon |= S3C2410_DCON_BYTE;
+		break;
+
+	case 2:
+		dcon |= S3C2410_DCON_HALFWORD;
+		break;
+
+	case 4:
+		dcon |= S3C2410_DCON_WORD;
+		break;
+
+	default:
+		pr_debug("%s: bad transfer size %d\n", __func__, xferunit);
+		return -EINVAL;
+	}
+
+	dcon |= S3C2410_DCON_HWTRIG;
+	dcon |= S3C2410_DCON_INTREQ;
+
+	pr_debug("%s: dcon now %08x\n", __func__, dcon);
+
+	chan->dcon = dcon;
+	chan->xfer_unit = xferunit;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_config);
+
+
+/* s3c2410_dma_devconfig
+ *
+ * configure the dma source/destination hardware type and address
+ *
+ * source:    DMA_FROM_DEVICE: source is hardware
+ *            DMA_TO_DEVICE: source is memory
+ *
+ * devaddr:   physical address of the source
+*/
+
+int s3c2410_dma_devconfig(enum dma_ch channel,
+			  enum dma_data_direction source,
+			  unsigned long devaddr)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	unsigned int hwcfg;
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: source=%d, devaddr=%08lx\n",
+		 __func__, (int)source, devaddr);
+
+	chan->source = source;
+	chan->dev_addr = devaddr;
+
+	switch (chan->req_ch) {
+	case DMACH_XD0:
+	case DMACH_XD1:
+		hwcfg = 0; /* AHB */
+		break;
+
+	default:
+		hwcfg = S3C2410_DISRCC_APB;
+	}
+
+	/* always assume our peripheral desintation is a fixed
+	 * address in memory. */
+	 hwcfg |= S3C2410_DISRCC_INC;
+
+	switch (source) {
+	case DMA_FROM_DEVICE:
+		/* source is hardware */
+		pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
+			 __func__, devaddr, hwcfg);
+		dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3);
+		dma_wrreg(chan, S3C2410_DMA_DISRC,  devaddr);
+		dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0));
+
+		chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
+		break;
+
+	case DMA_TO_DEVICE:
+		/* source is memory */
+		pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n",
+			 __func__, devaddr, hwcfg);
+		dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0));
+		dma_wrreg(chan, S3C2410_DMA_DIDST,  devaddr);
+		dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3);
+
+		chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC);
+		break;
+
+	default:
+		printk(KERN_ERR "dma%d: invalid source type (%d)\n",
+		       channel, source);
+
+		return -EINVAL;
+	}
+
+	if (dma_sel.direction != NULL)
+		(dma_sel.direction)(chan, chan->map, source);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_devconfig);
+
+/* s3c2410_dma_getposition
+ *
+ * returns the current transfer points for the dma source and destination
+*/
+
+int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dst)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	if (src != NULL)
+ 		*src = dma_rdreg(chan, S3C2410_DMA_DCSRC);
+
+ 	if (dst != NULL)
+ 		*dst = dma_rdreg(chan, S3C2410_DMA_DCDST);
+
+ 	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_getposition);
+
+/* system core operations */
+
+#ifdef CONFIG_PM
+
+static void s3c2410_dma_suspend_chan(struct s3c2410_dma_chan *cp)
+{
+	printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
+
+	if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) {
+		/* the dma channel is still working, which is probably
+		 * a bad thing to do over suspend/resume. We stop the
+		 * channel and assume that the client is either going to
+		 * retry after resume, or that it is broken.
+		 */
+
+		printk(KERN_INFO "dma: stopping channel %d due to suspend\n",
+		       cp->number);
+
+		s3c2410_dma_dostop(cp);
+	}
+}
+
+static int s3c2410_dma_suspend(void)
+{
+	struct s3c2410_dma_chan *cp = s3c2410_chans;
+	int channel;
+
+	for (channel = 0; channel < dma_channels; cp++, channel++)
+		s3c2410_dma_suspend_chan(cp);
+
+	return 0;
+}
+
+static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp)
+{
+	unsigned int no = cp->number | DMACH_LOW_LEVEL;
+
+	/* restore channel's hardware configuration */
+
+	if (!cp->in_use)
+		return;
+
+	printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
+
+	s3c2410_dma_config(no, cp->xfer_unit);
+	s3c2410_dma_devconfig(no, cp->source, cp->dev_addr);
+
+	/* re-select the dma source for this channel */
+
+	if (cp->map != NULL)
+		dma_sel.select(cp, cp->map);
+}
+
+static void s3c2410_dma_resume(void)
+{
+	struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1;
+	int channel;
+
+	for (channel = dma_channels - 1; channel >= 0; cp--, channel--)
+		s3c2410_dma_resume_chan(cp);
+}
+
+#else
+#define s3c2410_dma_suspend NULL
+#define s3c2410_dma_resume  NULL
+#endif /* CONFIG_PM */
+
+struct syscore_ops dma_syscore_ops = {
+	.suspend	= s3c2410_dma_suspend,
+	.resume		= s3c2410_dma_resume,
+};
+
+/* kmem cache implementation */
+
+static void s3c2410_dma_cache_ctor(void *p)
+{
+	memset(p, 0, sizeof(struct s3c2410_dma_buf));
+}
+
+/* initialisation code */
+
+static int __init s3c24xx_dma_syscore_init(void)
+{
+	register_syscore_ops(&dma_syscore_ops);
+
+	return 0;
+}
+
+late_initcall(s3c24xx_dma_syscore_init);
+
+int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq,
+			    unsigned int stride)
+{
+	struct s3c2410_dma_chan *cp;
+	int channel;
+	int ret;
+
+	printk("S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics\n");
+
+	dma_channels = channels;
+
+	dma_base = ioremap(S3C24XX_PA_DMA, stride * channels);
+	if (dma_base == NULL) {
+		printk(KERN_ERR "dma failed to remap register block\n");
+		return -ENOMEM;
+	}
+
+	dma_kmem = kmem_cache_create("dma_desc",
+				     sizeof(struct s3c2410_dma_buf), 0,
+				     SLAB_HWCACHE_ALIGN,
+				     s3c2410_dma_cache_ctor);
+
+	if (dma_kmem == NULL) {
+		printk(KERN_ERR "dma failed to make kmem cache\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	for (channel = 0; channel < channels;  channel++) {
+		cp = &s3c2410_chans[channel];
+
+		memset(cp, 0, sizeof(struct s3c2410_dma_chan));
+
+		/* dma channel irqs are in order.. */
+		cp->number = channel;
+		cp->irq    = channel + irq;
+		cp->regs   = dma_base + (channel * stride);
+
+		/* point current stats somewhere */
+		cp->stats  = &cp->stats_store;
+		cp->stats_store.timeout_shortest = LONG_MAX;
+
+		/* basic channel configuration */
+
+		cp->load_timeout = 1<<18;
+
+		printk("DMA channel %d at %p, irq %d\n",
+		       cp->number, cp->regs, cp->irq);
+	}
+
+	return 0;
+
+ err:
+	kmem_cache_destroy(dma_kmem);
+	iounmap(dma_base);
+	dma_base = NULL;
+	return ret;
+}
+
+int __init s3c2410_dma_init(void)
+{
+	return s3c24xx_dma_init(4, IRQ_DMA0, 0x40);
+}
+
+static inline int is_channel_valid(unsigned int channel)
+{
+	return (channel & DMA_CH_VALID);
+}
+
+static struct s3c24xx_dma_order *dma_order;
+
+
+/* s3c2410_dma_map_channel()
+ *
+ * turn the virtual channel number into a real, and un-used hardware
+ * channel.
+ *
+ * first, try the dma ordering given to us by either the relevant
+ * dma code, or the board. Then just find the first usable free
+ * channel
+*/
+
+static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
+{
+	struct s3c24xx_dma_order_ch *ord = NULL;
+	struct s3c24xx_dma_map *ch_map;
+	struct s3c2410_dma_chan *dmach;
+	int ch;
+
+	if (dma_sel.map == NULL || channel > dma_sel.map_size)
+		return NULL;
+
+	ch_map = dma_sel.map + channel;
+
+	/* first, try the board mapping */
+
+	if (dma_order) {
+		ord = &dma_order->channels[channel];
+
+		for (ch = 0; ch < dma_channels; ch++) {
+			int tmp;
+			if (!is_channel_valid(ord->list[ch]))
+				continue;
+
+			tmp = ord->list[ch] & ~DMA_CH_VALID;
+			if (s3c2410_chans[tmp].in_use == 0) {
+				ch = tmp;
+				goto found;
+			}
+		}
+
+		if (ord->flags & DMA_CH_NEVER)
+			return NULL;
+	}
+
+	/* second, search the channel map for first free */
+
+	for (ch = 0; ch < dma_channels; ch++) {
+		if (!is_channel_valid(ch_map->channels[ch]))
+			continue;
+
+		if (s3c2410_chans[ch].in_use == 0) {
+			printk("mapped channel %d to %d\n", channel, ch);
+			break;
+		}
+	}
+
+	if (ch >= dma_channels)
+		return NULL;
+
+	/* update our channel mapping */
+
+ found:
+	dmach = &s3c2410_chans[ch];
+	dmach->map = ch_map;
+	dmach->req_ch = channel;
+	s3c_dma_chan_map[channel] = dmach;
+
+	/* select the channel */
+
+	(dma_sel.select)(dmach, ch_map);
+
+	return dmach;
+}
+
+static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch)
+{
+	return 0;
+}
+
+int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel)
+{
+	struct s3c24xx_dma_map *nmap;
+	size_t map_sz = sizeof(*nmap) * sel->map_size;
+	int ptr;
+
+	nmap = kmemdup(sel->map, map_sz, GFP_KERNEL);
+	if (nmap == NULL)
+		return -ENOMEM;
+
+	memcpy(&dma_sel, sel, sizeof(*sel));
+
+	dma_sel.map = nmap;
+
+	for (ptr = 0; ptr < sel->map_size; ptr++)
+		s3c24xx_dma_check_entry(nmap+ptr, ptr);
+
+	return 0;
+}
+
+int __init s3c24xx_dma_order_set(struct s3c24xx_dma_order *ord)
+{
+	struct s3c24xx_dma_order *nord = dma_order;
+
+	if (nord == NULL)
+		nord = kmalloc(sizeof(struct s3c24xx_dma_order), GFP_KERNEL);
+
+	if (nord == NULL) {
+		printk(KERN_ERR "no memory to store dma channel order\n");
+		return -ENOMEM;
+	}
+
+	dma_order = nord;
+	memcpy(nord, ord, sizeof(struct s3c24xx_dma_order));
+	return 0;
+}
diff --git a/arch/arm/mach-s3c24xx/include/mach/gta02.h b/arch/arm/mach-s3c24xx/gta02.h
index 2173934..9430a71 100644
--- a/arch/arm/mach-s3c24xx/include/mach/gta02.h
+++ b/arch/arm/mach-s3c24xx/gta02.h
@@ -1,5 +1,13 @@
-#ifndef _GTA02_H
-#define _GTA02_H
+/*
+ * GTA02 header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C24XX_GTA02_H
+#define __MACH_S3C24XX_GTA02_H __FILE__
 
 #include <mach/regs-gpio.h>
 
@@ -12,4 +20,4 @@
 
 #define GTA02_IRQ_PCF50633	IRQ_EINT9
 
-#endif /* _GTA02_H */
+#endif /* __MACH_S3C24XX_GTA02_H */
diff --git a/arch/arm/mach-s3c24xx/h1940-bluetooth.c b/arch/arm/mach-s3c24xx/h1940-bluetooth.c
index 3f40c61..5b98bfd 100644
--- a/arch/arm/mach-s3c24xx/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c24xx/h1940-bluetooth.c
@@ -19,10 +19,10 @@
 #include <linux/gpio.h>
 #include <linux/rfkill.h>
 
-#include <mach/regs-gpio.h>
 #include <mach/hardware.h>
-#include <mach/h1940-latch.h>
-#include <mach/h1940.h>
+#include <mach/regs-gpio.h>
+
+#include "h1940.h"
 
 #define DRV_NAME "h1940-bt"
 
diff --git a/arch/arm/mach-s3c24xx/include/mach/h1940-latch.h b/arch/arm/mach-s3c24xx/h1940.h
index fc897d3..2950cc4 100644
--- a/arch/arm/mach-s3c24xx/include/mach/h1940-latch.h
+++ b/arch/arm/mach-s3c24xx/h1940.h
@@ -1,20 +1,30 @@
-/* arch/arm/mach-s3c2410/include/mach/h1940-latch.h
+/*
+ * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
  *
  * Copyright (c) 2005 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
- *  iPAQ H1940 series - latch definitions
+ * iPAQ H1940 series definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_ARCH_H1940_LATCH_H
-#define __ASM_ARCH_H1940_LATCH_H
+#ifndef __MACH_S3C24XX_H1940_H
+#define __MACH_S3C24XX_H1940_H __FILE__
 
-#include <asm/gpio.h>
+#define H1940_SUSPEND_CHECKSUM		(0x30003ff8)
+#define H1940_SUSPEND_RESUMEAT		(0x30081000)
+#define H1940_SUSPEND_CHECK		(0x30080000)
+
+extern void h1940_pm_return(void);
+extern int h1940_led_blink_set(unsigned gpio, int state,
+			       unsigned long *delay_on,
+			       unsigned long *delay_off);
+
+#include <linux/gpio.h>
 
 #define H1940_LATCH_GPIO(x)		(S3C_GPIO_END + (x))
 
@@ -40,4 +50,4 @@
 #define H1940_LATCH_LED_GREEN		H1940_LATCH_GPIO(14)
 #define H1940_LATCH_LED_FLASH		H1940_LATCH_GPIO(15)
 
-#endif /* __ASM_ARCH_H1940_LATCH_H */
+#endif /* __MACH_S3C24XX_H1940_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h b/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h
deleted file mode 100644
index 1b614d5..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
- *
- * Copyright (c) 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ANUBISCPLD_H
-#define __ASM_ARCH_ANUBISCPLD_H
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define ANUBIS_CTRL1_NANDSEL		(0x3)
-
-/* IDREG - revision */
-
-#define ANUBIS_IDREG_REVMASK		(0x7)
-
-#endif /* __ASM_ARCH_ANUBISCPLD_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h b/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h
deleted file mode 100644
index a2a3281..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/anubis-irq.h
- *
- * Copyright (c) 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- *  ANUBIS - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ANUBISIRQ_H
-#define __ASM_ARCH_ANUBISIRQ_H
-
-#define IRQ_IDE0       IRQ_EINT2
-#define IRQ_IDE1       IRQ_EINT3
-#define IRQ_ASIX       IRQ_EINT1
-
-#endif /* __ASM_ARCH_ANUBISIRQ_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/anubis-map.h b/arch/arm/mach-s3c24xx/include/mach/anubis-map.h
deleted file mode 100644
index c9deb3a..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/anubis-map.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/anubis-map.h
- *
- * Copyright (c) 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-#ifndef __ASM_ARCH_ANUBISMAP_H
-#define __ASM_ARCH_ANUBISMAP_H
-
-/* start peripherals off after the S3C2410 */
-
-#define ANUBIS_IOADDR(x)	(S3C2410_ADDR((x) + 0x01800000))
-
-#define ANUBIS_PA_CPLD		(S3C2410_CS1 | (1<<26))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define ANUBIS_VA_CTRL1	    ANUBIS_IOADDR(0x00000000)	 /* 0x01800000 */
-#define ANUBIS_PA_CTRL1	    (ANUBIS_PA_CPLD)
-
-#define ANUBIS_VA_IDREG	    ANUBIS_IOADDR(0x00300000)	 /* 0x01B00000 */
-#define ANUBIS_PA_IDREG	    (ANUBIS_PA_CPLD + (3<<23))
-
-#define ANUBIS_IDEPRI	    ANUBIS_IOADDR(0x01000000)
-#define ANUBIS_IDEPRIAUX    ANUBIS_IOADDR(0x01100000)
-#define ANUBIS_IDESEC	    ANUBIS_IOADDR(0x01200000)
-#define ANUBIS_IDESECAUX    ANUBIS_IOADDR(0x01300000)
-
-#endif /* __ASM_ARCH_ANUBISMAP_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h b/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h
deleted file mode 100644
index bee2a7a..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/bast-cpld.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * BAST - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTCPLD_H
-#define __ASM_ARCH_BASTCPLD_H
-
-/* CTRL1 - Audio LR routing */
-
-#define BAST_CPLD_CTRL1_LRCOFF	    (0x00)
-#define BAST_CPLD_CTRL1_LRCADC	    (0x01)
-#define BAST_CPLD_CTRL1_LRCDAC	    (0x02)
-#define BAST_CPLD_CTRL1_LRCARM	    (0x03)
-#define BAST_CPLD_CTRL1_LRMASK	    (0x03)
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define BAST_CPLD_CTRL2_WNAND       (0x04)
-#define BAST_CPLD_CTLR2_IDERST      (0x08)
-
-/* CTRL3 - rom write control, CPLD identity */
-
-#define BAST_CPLD_CTRL3_IDMASK      (0x0e)
-#define BAST_CPLD_CTRL3_ROMWEN      (0x01)
-
-/* CTRL4 - 8bit LCD interface control/status */
-
-#define BAST_CPLD_CTRL4_LLAT	    (0x01)
-#define BAST_CPLD_CTRL4_LCDRW	    (0x02)
-#define BAST_CPLD_CTRL4_LCDCMD	    (0x04)
-#define BAST_CPLD_CTRL4_LCDE2	    (0x01)
-
-/* CTRL5 - DMA routing */
-
-#define BAST_CPLD_DMA0_PRIIDE      (0<<0)
-#define BAST_CPLD_DMA0_SECIDE      (1<<0)
-#define BAST_CPLD_DMA0_ISA15       (2<<0)
-#define BAST_CPLD_DMA0_ISA36       (3<<0)
-
-#define BAST_CPLD_DMA1_PRIIDE      (0<<2)
-#define BAST_CPLD_DMA1_SECIDE      (1<<2)
-#define BAST_CPLD_DMA1_ISA15       (2<<2)
-#define BAST_CPLD_DMA1_ISA36       (3<<2)
-
-#endif /* __ASM_ARCH_BASTCPLD_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-irq.h b/arch/arm/mach-s3c24xx/include/mach/bast-irq.h
deleted file mode 100644
index cac428c..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/bast-irq.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/bast-irq.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Machine BAST - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTIRQ_H
-#define __ASM_ARCH_BASTIRQ_H
-
-/* irq numbers to onboard peripherals */
-
-#define IRQ_USBOC      IRQ_EINT18
-#define IRQ_IDE0       IRQ_EINT16
-#define IRQ_IDE1       IRQ_EINT17
-#define IRQ_PCSERIAL1  IRQ_EINT15
-#define IRQ_PCSERIAL2  IRQ_EINT14
-#define IRQ_PCPARALLEL IRQ_EINT13
-#define IRQ_ASIX       IRQ_EINT11
-#define IRQ_DM9000     IRQ_EINT10
-#define IRQ_ISA	       IRQ_EINT9
-#define IRQ_SMALERT    IRQ_EINT8
-
-#endif /* __ASM_ARCH_BASTIRQ_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-map.h b/arch/arm/mach-s3c24xx/include/mach/bast-map.h
deleted file mode 100644
index eecea2a..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/bast-map.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/bast-map.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Machine BAST - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x13000000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space. We also have the board's CPLD to find register space
- * for.
- */
-
-#ifndef __ASM_ARCH_BASTMAP_H
-#define __ASM_ARCH_BASTMAP_H
-
-#define BAST_IOADDR(x)	   (S3C2410_ADDR((x) + 0x01300000))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define BAST_VA_CTRL1	    BAST_IOADDR(0x00000000)	 /* 0x01300000 */
-#define BAST_PA_CTRL1	    (S3C2410_CS5 | 0x7800000)
-
-#define BAST_VA_CTRL2	    BAST_IOADDR(0x00100000)	 /* 0x01400000 */
-#define BAST_PA_CTRL2	    (S3C2410_CS1 | 0x6000000)
-
-#define BAST_VA_CTRL3	    BAST_IOADDR(0x00200000)	 /* 0x01500000 */
-#define BAST_PA_CTRL3	    (S3C2410_CS1 | 0x6800000)
-
-#define BAST_VA_CTRL4	    BAST_IOADDR(0x00300000)	 /* 0x01600000 */
-#define BAST_PA_CTRL4	    (S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define BAST_PA_PC104_IRQREQ  (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
-#define BAST_VA_PC104_IRQREQ  BAST_IOADDR(0x00400000)
-
-#define BAST_PA_PC104_IRQRAW  (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
-#define BAST_VA_PC104_IRQRAW  BAST_IOADDR(0x00500000)
-
-#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
-#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000)
-
-#define BAST_PA_LCD_RCMD1     (0x8800000)
-#define BAST_VA_LCD_RCMD1     BAST_IOADDR(0x00700000)
-
-#define BAST_PA_LCD_WCMD1     (0x8000000)
-#define BAST_VA_LCD_WCMD1     BAST_IOADDR(0x00800000)
-
-#define BAST_PA_LCD_RDATA1    (0x9800000)
-#define BAST_VA_LCD_RDATA1    BAST_IOADDR(0x00900000)
-
-#define BAST_PA_LCD_WDATA1    (0x9000000)
-#define BAST_VA_LCD_WDATA1    BAST_IOADDR(0x00A00000)
-
-#define BAST_PA_LCD_RCMD2     (0xA800000)
-#define BAST_VA_LCD_RCMD2     BAST_IOADDR(0x00B00000)
-
-#define BAST_PA_LCD_WCMD2     (0xA000000)
-#define BAST_VA_LCD_WCMD2     BAST_IOADDR(0x00C00000)
-
-#define BAST_PA_LCD_RDATA2    (0xB800000)
-#define BAST_VA_LCD_RDATA2    BAST_IOADDR(0x00D00000)
-
-#define BAST_PA_LCD_WDATA2    (0xB000000)
-#define BAST_VA_LCD_WDATA2    BAST_IOADDR(0x00E00000)
-
-
-/* 0xE0000000 contains the IO space that is split by speed and
- * whether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000  8bit,  slow
- * 0x04000000 to 0x08000000  16bit, slow
- * 0x08000000 to 0x0C000000  16bit, net
- * 0x0C000000 to 0x10000000  16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x00000000 to 0x01000000 16MB ISA IO space
- * 0x01000000 to 0x02000000 16MB ISA memory space
- * 0x02000000 to 0x02100000 1MB  IDE primary channel
- * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB  IDE secondary channel
- * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
- * 0x02400000 to 0x02500000 1MB  ASIX ethernet controller
- * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controller
- * 0x02600000 to 0x02700000 1MB  PC SuperIO controller
- *
- * the phyiscal layout of the zones are:
- *  nGCS2 - 8bit, slow
- *  nGCS3 - 16bit, slow
- *  nGCS4 - 16bit, net
- *  nGCS5 - 16bit, fast
- */
-
-#define BAST_VA_MULTISPACE (0xE0000000)
-
-#define BAST_VA_ISAIO	   (BAST_VA_MULTISPACE + 0x00000000)
-#define BAST_VA_ISAMEM	   (BAST_VA_MULTISPACE + 0x01000000)
-#define BAST_VA_IDEPRI	   (BAST_VA_MULTISPACE + 0x02000000)
-#define BAST_VA_IDEPRIAUX  (BAST_VA_MULTISPACE + 0x02100000)
-#define BAST_VA_IDESEC	   (BAST_VA_MULTISPACE + 0x02200000)
-#define BAST_VA_IDESECAUX  (BAST_VA_MULTISPACE + 0x02300000)
-#define BAST_VA_ASIXNET	   (BAST_VA_MULTISPACE + 0x02400000)
-#define BAST_VA_DM9000	   (BAST_VA_MULTISPACE + 0x02500000)
-#define BAST_VA_SUPERIO	   (BAST_VA_MULTISPACE + 0x02600000)
-
-#define BAST_VA_MULTISPACE (0xE0000000)
-
-#define BAST_VAM_CS2 (0x00000000)
-#define BAST_VAM_CS3 (0x04000000)
-#define BAST_VAM_CS4 (0x08000000)
-#define BAST_VAM_CS5 (0x0C000000)
-
-/* physical offset addresses for the peripherals */
-
-#define BAST_PA_ISAIO	  (0x00000000)
-#define BAST_PA_ASIXNET	  (0x01000000)
-#define BAST_PA_SUPERIO	  (0x01800000)
-#define BAST_PA_IDEPRI	  (0x02000000)
-#define BAST_PA_IDEPRIAUX (0x02800000)
-#define BAST_PA_IDESEC	  (0x03000000)
-#define BAST_PA_IDESECAUX (0x03800000)
-#define BAST_PA_ISAMEM	  (0x04000000)
-#define BAST_PA_DM9000	  (0x05000000)
-
-/* some configurations for the peripherals */
-
-#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2)
-/*  */
-
-#define BAST_ASIXNET_CS  BAST_VAM_CS5
-#define BAST_IDE_CS	 BAST_VAM_CS5
-#define BAST_DM9000_CS	 BAST_VAM_CS4
-
-#endif /* __ASM_ARCH_BASTMAP_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h b/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h
deleted file mode 100644
index c53ad34..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <plat/gpio-fns.h>
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h
deleted file mode 100644
index 3890a05..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - GPIO bank numbering
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __MACH_GPIONRS_H
-#define __MACH_GPIONRS_H
-
-#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
-
-#define S3C2410_GPIO_BANKG   (32*6)
-#define S3C2410_GPIO_BANKH   (32*7)
-
-/* GPIO sizes for various SoCs:
- *
- *             2442
- *   2410 2412 2440 2443 2416
- *   ---- ---- ---- ---- ----
- * A 23   22   25   16   25
- * B 11   11   11   11   9
- * C 16   15   16   16   16
- * D 16   16   16   16   16
- * E 16   16   16   16   16
- * F 8    8    8    8    8
- * G 16   16   16   16   8
- * H 11   11   9    15   15
- * J --   --   13   16   --
- * K --   --   --   --   16
- * L --   --   --   15   7
- * M --   --   --   2    2
- */
-
-/* GPIO bank sizes */
-#define S3C2410_GPIO_A_NR	(32)
-#define S3C2410_GPIO_B_NR	(32)
-#define S3C2410_GPIO_C_NR	(32)
-#define S3C2410_GPIO_D_NR	(32)
-#define S3C2410_GPIO_E_NR	(32)
-#define S3C2410_GPIO_F_NR	(32)
-#define S3C2410_GPIO_G_NR	(32)
-#define S3C2410_GPIO_H_NR	(32)
-#define S3C2410_GPIO_J_NR	(32)	/* technically 16. */
-#define S3C2410_GPIO_K_NR	(32)	/* technically 16. */
-#define S3C2410_GPIO_L_NR	(32)	/* technically 15. */
-#define S3C2410_GPIO_M_NR	(32)	/* technically 2. */
-
-#if CONFIG_S3C_GPIO_SPACE != 0
-#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
-#endif
-
-#define S3C2410_GPIO_NEXT(__gpio) \
-	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
-
-#ifndef __ASSEMBLY__
-
-enum s3c_gpio_number {
-	S3C2410_GPIO_A_START = 0,
-	S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
-	S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
-	S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
-	S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
-	S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
-	S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
-	S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
-	S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H),
-	S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J),
-	S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K),
-	S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L),
-};
-
-#endif /* __ASSEMBLY__ */
-
-/* S3C2410 GPIO number definitions. */
-
-#define S3C2410_GPA(_nr)	(S3C2410_GPIO_A_START + (_nr))
-#define S3C2410_GPB(_nr)	(S3C2410_GPIO_B_START + (_nr))
-#define S3C2410_GPC(_nr)	(S3C2410_GPIO_C_START + (_nr))
-#define S3C2410_GPD(_nr)	(S3C2410_GPIO_D_START + (_nr))
-#define S3C2410_GPE(_nr)	(S3C2410_GPIO_E_START + (_nr))
-#define S3C2410_GPF(_nr)	(S3C2410_GPIO_F_START + (_nr))
-#define S3C2410_GPG(_nr)	(S3C2410_GPIO_G_START + (_nr))
-#define S3C2410_GPH(_nr)	(S3C2410_GPIO_H_START + (_nr))
-#define S3C2410_GPJ(_nr)	(S3C2410_GPIO_J_START + (_nr))
-#define S3C2410_GPK(_nr)	(S3C2410_GPIO_K_START + (_nr))
-#define S3C2410_GPL(_nr)	(S3C2410_GPIO_L_START + (_nr))
-#define S3C2410_GPM(_nr)	(S3C2410_GPIO_M_START + (_nr))
-
-#endif /* __MACH_GPIONRS_H */
-
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-track.h b/arch/arm/mach-s3c24xx/include/mach/gpio-track.h
deleted file mode 100644
index c410a07..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/gpio-track.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* arch/arm/mach-s3c24100/include/mach/gpio-core.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C2410 - GPIO core support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_CORE_H
-#define __ASM_ARCH_GPIO_CORE_H __FILE__
-
-#include <mach/regs-gpio.h>
-
-extern struct samsung_gpio_chip s3c24xx_gpios[];
-
-static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
-{
-	struct samsung_gpio_chip *chip;
-
-	if (pin > S3C_GPIO_END)
-		return NULL;
-
-	chip = &s3c24xx_gpios[pin/32];
-	return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL;
-}
-
-#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio.h b/arch/arm/mach-s3c24xx/include/mach/gpio.h
index 6fac70f..1459156 100644
--- a/arch/arm/mach-s3c24xx/include/mach/gpio.h
+++ b/arch/arm/mach-s3c24xx/include/mach/gpio.h
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/gpio.h
- *
+/*
  * Copyright (c) 2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
@@ -15,6 +14,9 @@
  * devices that need GPIO.
  */
 
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H __FILE__
+
 #ifdef CONFIG_CPU_S3C244X
 #define ARCH_NR_GPIOS	(32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA)
 #elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
@@ -23,8 +25,83 @@
 #define ARCH_NR_GPIOS	(256 + CONFIG_S3C24XX_GPIO_EXTRA)
 #endif
 
-#include <mach/gpio-nrs.h>
-#include <mach/gpio-fns.h>
+/*
+ * GPIO sizes for various SoCs:
+ *
+ *   2410 2412 2440 2443 2416
+ *             2442
+ *   ---- ---- ---- ---- ----
+ * A  23   22   25   16   25
+ * B  11   11   11   11   9
+ * C  16   15   16   16   16
+ * D  16   16   16   16   16
+ * E  16   16   16   16   16
+ * F  8    8    8    8    8
+ * G  16   16   16   16   8
+ * H  11   11   9    15   15
+ * J  --   --   13   16   --
+ * K  --   --   --   --   16
+ * L  --   --   --   15   7
+ * M  --   --   --   2    2
+ */
+
+/* GPIO bank sizes */
+
+#define S3C2410_GPIO_A_NR	(32)
+#define S3C2410_GPIO_B_NR	(32)
+#define S3C2410_GPIO_C_NR	(32)
+#define S3C2410_GPIO_D_NR	(32)
+#define S3C2410_GPIO_E_NR	(32)
+#define S3C2410_GPIO_F_NR	(32)
+#define S3C2410_GPIO_G_NR	(32)
+#define S3C2410_GPIO_H_NR	(32)
+#define S3C2410_GPIO_J_NR	(32)	/* technically 16. */
+#define S3C2410_GPIO_K_NR	(32)	/* technically 16. */
+#define S3C2410_GPIO_L_NR	(32)	/* technically 15. */
+#define S3C2410_GPIO_M_NR	(32)	/* technically 2. */
+
+#if CONFIG_S3C_GPIO_SPACE != 0
+#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
+#endif
+
+#define S3C2410_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
+
+#ifndef __ASSEMBLY__
+
+enum s3c_gpio_number {
+	S3C2410_GPIO_A_START = 0,
+	S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
+	S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
+	S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
+	S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
+	S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
+	S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
+	S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
+	S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H),
+	S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J),
+	S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K),
+	S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L),
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* S3C2410 GPIO number definitions. */
+
+#define S3C2410_GPA(_nr)	(S3C2410_GPIO_A_START + (_nr))
+#define S3C2410_GPB(_nr)	(S3C2410_GPIO_B_START + (_nr))
+#define S3C2410_GPC(_nr)	(S3C2410_GPIO_C_START + (_nr))
+#define S3C2410_GPD(_nr)	(S3C2410_GPIO_D_START + (_nr))
+#define S3C2410_GPE(_nr)	(S3C2410_GPIO_E_START + (_nr))
+#define S3C2410_GPF(_nr)	(S3C2410_GPIO_F_START + (_nr))
+#define S3C2410_GPG(_nr)	(S3C2410_GPIO_G_START + (_nr))
+#define S3C2410_GPH(_nr)	(S3C2410_GPIO_H_START + (_nr))
+#define S3C2410_GPJ(_nr)	(S3C2410_GPIO_J_START + (_nr))
+#define S3C2410_GPK(_nr)	(S3C2410_GPIO_K_START + (_nr))
+#define S3C2410_GPL(_nr)	(S3C2410_GPIO_L_START + (_nr))
+#define S3C2410_GPM(_nr)	(S3C2410_GPIO_M_START + (_nr))
+
+#include <plat/gpio-cfg.h>
 
 #ifdef CONFIG_CPU_S3C244X
 #define S3C_GPIO_END	(S3C2410_GPJ(0) + 32)
@@ -33,3 +110,5 @@
 #else
 #define S3C_GPIO_END	(S3C2410_GPH(0) + 32)
 #endif
+
+#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/h1940.h b/arch/arm/mach-s3c24xx/include/mach/h1940.h
deleted file mode 100644
index 2aa683c..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/h1940.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/h1940.h
- *
- * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
- *
- * H1940 definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_H1940_H
-#define __ASM_ARCH_H1940_H
-
-#define H1940_SUSPEND_CHECKSUM		(0x30003ff8)
-#define H1940_SUSPEND_RESUMEAT		(0x30081000)
-#define H1940_SUSPEND_CHECK		(0x30080000)
-
-extern void h1940_pm_return(void);
-extern int h1940_led_blink_set(unsigned gpio, int state,
-	unsigned long *delay_on, unsigned long *delay_off);
-
-
-#endif /* __ASM_ARCH_H1940_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/hardware.h b/arch/arm/mach-s3c24xx/include/mach/hardware.h
index aef5631..a6cc14a 100644
--- a/arch/arm/mach-s3c24xx/include/mach/hardware.h
+++ b/arch/arm/mach-s3c24xx/include/mach/hardware.h
@@ -23,12 +23,6 @@ extern int s3c2440_set_dsc(unsigned int pin, unsigned int value);
 
 #endif /* CONFIG_CPU_S3C2440 */
 
-#ifdef CONFIG_CPU_S3C2412
-
-extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
-
-#endif /* CONFIG_CPU_S3C2412 */
-
 #endif /* __ASSEMBLY__ */
 
 #include <asm/sizes.h>
diff --git a/arch/arm/mach-s3c24xx/include/mach/idle.h b/arch/arm/mach-s3c24xx/include/mach/idle.h
deleted file mode 100644
index e9ddd70..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/idle.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/idle.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 CPU Idle controls
-*/
-
-#ifndef __ASM_ARCH_IDLE_H
-#define __ASM_ARCH_IDLE_H __FILE__
-
-/* This allows the over-ride of the default idle code, in case there
- * is any other things to be done over idle (like DVS)
-*/
-
-extern void (*s3c24xx_idle)(void);
-
-extern void s3c24xx_default_idle(void);
-
-#endif /* __ASM_ARCH_IDLE_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h b/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h
deleted file mode 100644
index e9e36b0..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
- *
- * Copyright 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * OSIRIS - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_OSIRISCPLD_H
-#define __ASM_ARCH_OSIRISCPLD_H
-
-/* CTRL0 - NAND WP control */
-
-#define OSIRIS_CTRL0_NANDSEL		(0x3)
-#define OSIRIS_CTRL0_BOOT_INT		(1<<3)
-#define OSIRIS_CTRL0_PCMCIA		(1<<4)
-#define OSIRIS_CTRL0_FIX8		(1<<5)
-#define OSIRIS_CTRL0_PCMCIA_nWAIT	(1<<6)
-#define OSIRIS_CTRL0_PCMCIA_nIOIS16	(1<<7)
-
-#define OSIRIS_CTRL1_FIX8		(1<<0)
-
-#define OSIRIS_ID_REVMASK		(0x7)
-
-#endif /* __ASM_ARCH_OSIRISCPLD_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
index a11a638..c2ef016 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
@@ -14,8 +14,6 @@
 #ifndef __ASM_ARCH_REGS_GPIO_H
 #define __ASM_ARCH_REGS_GPIO_H
 
-#include <mach/gpio-nrs.h>
-
 #define S3C24XX_MISCCR		S3C24XX_GPIOREG2(0x80)
 
 /* general configuration options */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-mem.h
deleted file mode 100644
index e0c67b0..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-mem.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-mem.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Memory Control register definitions
-*/
-
-#ifndef __ASM_ARM_MEMREGS_H
-#define __ASM_ARM_MEMREGS_H
-
-#ifndef S3C2410_MEMREG
-#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
-
-/* bus width, and wait state control */
-#define S3C2410_BWSCON			S3C2410_MEMREG(0x0000)
-
-/* bank zero config - note, pinstrapped from OM pins! */
-#define S3C2410_BWSCON_DW0_16		(1<<1)
-#define S3C2410_BWSCON_DW0_32		(2<<1)
-
-/* bank one configs */
-#define S3C2410_BWSCON_DW1_8		(0<<4)
-#define S3C2410_BWSCON_DW1_16		(1<<4)
-#define S3C2410_BWSCON_DW1_32		(2<<4)
-#define S3C2410_BWSCON_WS1		(1<<6)
-#define S3C2410_BWSCON_ST1		(1<<7)
-
-/* bank 2 configurations */
-#define S3C2410_BWSCON_DW2_8		(0<<8)
-#define S3C2410_BWSCON_DW2_16		(1<<8)
-#define S3C2410_BWSCON_DW2_32		(2<<8)
-#define S3C2410_BWSCON_WS2		(1<<10)
-#define S3C2410_BWSCON_ST2		(1<<11)
-
-/* bank 3 configurations */
-#define S3C2410_BWSCON_DW3_8		(0<<12)
-#define S3C2410_BWSCON_DW3_16		(1<<12)
-#define S3C2410_BWSCON_DW3_32		(2<<12)
-#define S3C2410_BWSCON_WS3		(1<<14)
-#define S3C2410_BWSCON_ST3		(1<<15)
-
-/* bank 4 configurations */
-#define S3C2410_BWSCON_DW4_8		(0<<16)
-#define S3C2410_BWSCON_DW4_16		(1<<16)
-#define S3C2410_BWSCON_DW4_32		(2<<16)
-#define S3C2410_BWSCON_WS4		(1<<18)
-#define S3C2410_BWSCON_ST4		(1<<19)
-
-/* bank 5 configurations */
-#define S3C2410_BWSCON_DW5_8		(0<<20)
-#define S3C2410_BWSCON_DW5_16		(1<<20)
-#define S3C2410_BWSCON_DW5_32		(2<<20)
-#define S3C2410_BWSCON_WS5		(1<<22)
-#define S3C2410_BWSCON_ST5		(1<<23)
-
-/* bank 6 configurations */
-#define S3C2410_BWSCON_DW6_8		(0<<24)
-#define S3C2410_BWSCON_DW6_16		(1<<24)
-#define S3C2410_BWSCON_DW6_32		(2<<24)
-#define S3C2410_BWSCON_WS6		(1<<26)
-#define S3C2410_BWSCON_ST6		(1<<27)
-
-/* bank 7 configurations */
-#define S3C2410_BWSCON_DW7_8		(0<<28)
-#define S3C2410_BWSCON_DW7_16		(1<<28)
-#define S3C2410_BWSCON_DW7_32		(2<<28)
-#define S3C2410_BWSCON_WS7		(1<<30)
-#define S3C2410_BWSCON_ST7		(1<<31)
-
-/* accesor functions for getting BANK(n) configuration. (n != 0) */
-
-#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
-
-#define S3C2410_BWSCON_DW8		(0)
-#define S3C2410_BWSCON_DW16		(1)
-#define S3C2410_BWSCON_DW32		(2)
-#define S3C2410_BWSCON_WS		(1 << 2)
-#define S3C2410_BWSCON_ST		(1 << 3)
-
-/* memory set (rom, ram) */
-#define S3C2410_BANKCON0		S3C2410_MEMREG(0x0004)
-#define S3C2410_BANKCON1		S3C2410_MEMREG(0x0008)
-#define S3C2410_BANKCON2		S3C2410_MEMREG(0x000C)
-#define S3C2410_BANKCON3		S3C2410_MEMREG(0x0010)
-#define S3C2410_BANKCON4		S3C2410_MEMREG(0x0014)
-#define S3C2410_BANKCON5		S3C2410_MEMREG(0x0018)
-#define S3C2410_BANKCON6		S3C2410_MEMREG(0x001C)
-#define S3C2410_BANKCON7		S3C2410_MEMREG(0x0020)
-
-/* bank configuration registers */
-
-#define S3C2410_BANKCON_PMCnorm		(0x00)
-#define S3C2410_BANKCON_PMC4		(0x01)
-#define S3C2410_BANKCON_PMC8		(0x02)
-#define S3C2410_BANKCON_PMC16		(0x03)
-
-/* bank configurations for banks 0..7, note banks
- * 6 and 7 have different configurations depending on
- * the memory type bits */
-
-#define S3C2410_BANKCON_Tacp2		(0x0 << 2)
-#define S3C2410_BANKCON_Tacp3		(0x1 << 2)
-#define S3C2410_BANKCON_Tacp4		(0x2 << 2)
-#define S3C2410_BANKCON_Tacp6		(0x3 << 2)
-#define S3C2410_BANKCON_Tacp_SHIFT	(2)
-
-#define S3C2410_BANKCON_Tcah0		(0x0 << 4)
-#define S3C2410_BANKCON_Tcah1		(0x1 << 4)
-#define S3C2410_BANKCON_Tcah2		(0x2 << 4)
-#define S3C2410_BANKCON_Tcah4		(0x3 << 4)
-#define S3C2410_BANKCON_Tcah_SHIFT	(4)
-
-#define S3C2410_BANKCON_Tcoh0		(0x0 << 6)
-#define S3C2410_BANKCON_Tcoh1		(0x1 << 6)
-#define S3C2410_BANKCON_Tcoh2		(0x2 << 6)
-#define S3C2410_BANKCON_Tcoh4		(0x3 << 6)
-#define S3C2410_BANKCON_Tcoh_SHIFT	(6)
-
-#define S3C2410_BANKCON_Tacc1		(0x0 << 8)
-#define S3C2410_BANKCON_Tacc2		(0x1 << 8)
-#define S3C2410_BANKCON_Tacc3		(0x2 << 8)
-#define S3C2410_BANKCON_Tacc4		(0x3 << 8)
-#define S3C2410_BANKCON_Tacc6		(0x4 << 8)
-#define S3C2410_BANKCON_Tacc8		(0x5 << 8)
-#define S3C2410_BANKCON_Tacc10		(0x6 << 8)
-#define S3C2410_BANKCON_Tacc14		(0x7 << 8)
-#define S3C2410_BANKCON_Tacc_SHIFT	(8)
-
-#define S3C2410_BANKCON_Tcos0		(0x0 << 11)
-#define S3C2410_BANKCON_Tcos1		(0x1 << 11)
-#define S3C2410_BANKCON_Tcos2		(0x2 << 11)
-#define S3C2410_BANKCON_Tcos4		(0x3 << 11)
-#define S3C2410_BANKCON_Tcos_SHIFT	(11)
-
-#define S3C2410_BANKCON_Tacs0		(0x0 << 13)
-#define S3C2410_BANKCON_Tacs1		(0x1 << 13)
-#define S3C2410_BANKCON_Tacs2		(0x2 << 13)
-#define S3C2410_BANKCON_Tacs4		(0x3 << 13)
-#define S3C2410_BANKCON_Tacs_SHIFT	(13)
-
-#define S3C2410_BANKCON_SRAM		(0x0 << 15)
-#define S3C2410_BANKCON_SDRAM		(0x3 << 15)
-
-/* next bits only for SDRAM in 6,7 */
-#define S3C2410_BANKCON_Trcd2		(0x00 << 2)
-#define S3C2410_BANKCON_Trcd3		(0x01 << 2)
-#define S3C2410_BANKCON_Trcd4		(0x02 << 2)
-
-/* control column address select */
-#define S3C2410_BANKCON_SCANb8		(0x00 << 0)
-#define S3C2410_BANKCON_SCANb9		(0x01 << 0)
-#define S3C2410_BANKCON_SCANb10		(0x02 << 0)
-
-#define S3C2410_REFRESH			S3C2410_MEMREG(0x0024)
-#define S3C2410_BANKSIZE		S3C2410_MEMREG(0x0028)
-#define S3C2410_MRSRB6			S3C2410_MEMREG(0x002C)
-#define S3C2410_MRSRB7			S3C2410_MEMREG(0x0030)
-
-/* refresh control */
-
-#define S3C2410_REFRESH_REFEN		(1<<23)
-#define S3C2410_REFRESH_SELF		(1<<22)
-#define S3C2410_REFRESH_REFCOUNTER	((1<<11)-1)
-
-#define S3C2410_REFRESH_TRP_MASK	(3<<20)
-#define S3C2410_REFRESH_TRP_2clk	(0<<20)
-#define S3C2410_REFRESH_TRP_3clk	(1<<20)
-#define S3C2410_REFRESH_TRP_4clk	(2<<20)
-
-#define S3C2410_REFRESH_TSRC_MASK	(3<<18)
-#define S3C2410_REFRESH_TSRC_4clk	(0<<18)
-#define S3C2410_REFRESH_TSRC_5clk	(1<<18)
-#define S3C2410_REFRESH_TSRC_6clk	(2<<18)
-#define S3C2410_REFRESH_TSRC_7clk	(3<<18)
-
-
-/* mode select register(s) */
-
-#define  S3C2410_MRSRB_CL1		(0x00 << 4)
-#define  S3C2410_MRSRB_CL2		(0x02 << 4)
-#define  S3C2410_MRSRB_CL3		(0x03 << 4)
-
-/* bank size register */
-#define S3C2410_BANKSIZE_128M		(0x2 << 0)
-#define S3C2410_BANKSIZE_64M		(0x1 << 0)
-#define S3C2410_BANKSIZE_32M		(0x0 << 0)
-#define S3C2410_BANKSIZE_16M		(0x7 << 0)
-#define S3C2410_BANKSIZE_8M		(0x6 << 0)
-#define S3C2410_BANKSIZE_4M		(0x5 << 0)
-#define S3C2410_BANKSIZE_2M		(0x4 << 0)
-#define S3C2410_BANKSIZE_MASK		(0x7 << 0)
-#define S3C2410_BANKSIZE_SCLK_EN	(1<<4)
-#define S3C2410_BANKSIZE_SCKE_EN	(1<<5)
-#define S3C2410_BANKSIZE_BURST		(1<<7)
-
-#endif /* __ASM_ARM_MEMREGS_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-power.h b/arch/arm/mach-s3c24xx/include/mach/regs-power.h
deleted file mode 100644
index 4932b87..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-power.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-power.h
- *
- * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C24XX power control register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_PWR
-#define __ASM_ARM_REGS_PWR __FILE__
-
-#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2412_PWRMODECON	S3C24XX_PWRREG(0x20)
-#define S3C2412_PWRCFG		S3C24XX_PWRREG(0x24)
-
-#define S3C2412_INFORM0		S3C24XX_PWRREG(0x70)
-#define S3C2412_INFORM1		S3C24XX_PWRREG(0x74)
-#define S3C2412_INFORM2		S3C24XX_PWRREG(0x78)
-#define S3C2412_INFORM3		S3C24XX_PWRREG(0x7C)
-
-#define S3C2412_PWRCFG_BATF_IRQ			(1<<0)
-#define S3C2412_PWRCFG_BATF_IGNORE		(2<<0)
-#define S3C2412_PWRCFG_BATF_SLEEP		(3<<0)
-#define S3C2412_PWRCFG_BATF_MASK		(3<<0)
-
-#define S3C2412_PWRCFG_STANDBYWFI_IGNORE	(0<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_IDLE		(1<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_STOP		(2<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_SLEEP		(3<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_MASK		(3<<6)
-
-#define S3C2412_PWRCFG_RTC_MASKIRQ		(1<<8)
-#define S3C2412_PWRCFG_NAND_NORST		(1<<9)
-
-#endif /* __ASM_ARM_REGS_PWR */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h
deleted file mode 100644
index fb63525..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2412 memory register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_S3C2412_MEM
-#define __ASM_ARM_REGS_S3C2412_MEM
-
-#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x))
-
-#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x))
-#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o)))
-
-#define S3C2412_BANKCFG			S3C2412_MEMREG(0x00)
-#define S3C2412_BANKCON1		S3C2412_MEMREG(0x04)
-#define S3C2412_BANKCON2		S3C2412_MEMREG(0x08)
-#define S3C2412_BANKCON3		S3C2412_MEMREG(0x0C)
-
-#define S3C2412_REFRESH			S3C2412_MEMREG(0x10)
-#define S3C2412_TIMEOUT			S3C2412_MEMREG(0x14)
-
-/* EBI control registers */
-
-#define S3C2412_EBI_PR			S3C2412_EBIREG(0x00)
-#define S3C2412_EBI_BANKCFG		S3C2412_EBIREG(0x04)
-
-/* SSMC control registers */
-
-#define S3C2412_SSMC_BANK(x)		S3C2412_SSMC(x, 0x00)
-#define S3C2412_SMIDCYR(x)		S3C2412_SSMC(x, 0x00)
-#define S3C2412_SMBWSTRD(x)		S3C2412_SSMC(x, 0x04)
-#define S3C2412_SMBWSTWRR(x)		S3C2412_SSMC(x, 0x08)
-#define S3C2412_SMBWSTOENR(x)		S3C2412_SSMC(x, 0x0C)
-#define S3C2412_SMBWSTWENR(x)		S3C2412_SSMC(x, 0x10)
-#define S3C2412_SMBCR(x)		S3C2412_SSMC(x, 0x14)
-#define S3C2412_SMBSR(x)		S3C2412_SSMC(x, 0x18)
-#define S3C2412_SMBWSTBRDR(x)		S3C2412_SSMC(x, 0x1C)
-
-#endif /*  __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h
deleted file mode 100644
index aa69dc7..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
- *
- * Copyright 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2412 specific register definitions
-*/
-
-#ifndef __ASM_ARCH_REGS_S3C2412_H
-#define __ASM_ARCH_REGS_S3C2412_H "s3c2412"
-
-#define S3C2412_SWRST		(S3C24XX_VA_CLKPWR + 0x30)
-#define S3C2412_SWRST_RESET	(0x533C2412)
-
-/* see regs-power.h for the other registers in the power block. */
-
-#endif	/* __ASM_ARCH_REGS_S3C2412_H */
-
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h
deleted file mode 100644
index 2f31b74..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
- *	as part of OpenInkpot project
- * Copyright (c) 2009 Promwad Innovation Company
- *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2416 memory register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_S3C2416_MEM
-#define __ASM_ARM_REGS_S3C2416_MEM
-
-#ifndef S3C2416_MEMREG
-#define S3C2416_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
-
-#define S3C2416_BANKCFG			S3C2416_MEMREG(0x00)
-#define S3C2416_BANKCON1		S3C2416_MEMREG(0x04)
-#define S3C2416_BANKCON2		S3C2416_MEMREG(0x08)
-#define S3C2416_BANKCON3		S3C2416_MEMREG(0x0C)
-
-#define S3C2416_REFRESH			S3C2416_MEMREG(0x10)
-#define S3C2416_TIMEOUT			S3C2416_MEMREG(0x14)
-
-#endif /*  __ASM_ARM_REGS_S3C2416_MEM */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h
deleted file mode 100644
index e443167..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
- *	as part of OpenInkpot project
- * Copyright (c) 2009 Promwad Innovation Company
- *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2416 specific register definitions
-*/
-
-#ifndef __ASM_ARCH_REGS_S3C2416_H
-#define __ASM_ARCH_REGS_S3C2416_H "s3c2416"
-
-#define S3C2416_SWRST		(S3C24XX_VA_CLKPWR + 0x44)
-#define S3C2416_SWRST_RESET	(0x533C2416)
-
-/* see regs-power.h for the other registers in the power block. */
-
-#endif	/* __ASM_ARCH_REGS_S3C2416_H */
-
diff --git a/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h
deleted file mode 100644
index e411991..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
- *
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * VR1000 - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VR1000CPLD_H
-#define __ASM_ARCH_VR1000CPLD_H
-
-#define VR1000_CPLD_CTRL2_RAMWEN     (0x04)   /* SRAM Write Enable */
-
-#endif /* __ASM_ARCH_VR1000CPLD_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h
deleted file mode 100644
index 47add13..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Machine VR1000 - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VR1000IRQ_H
-#define __ASM_ARCH_VR1000IRQ_H
-
-/* irq numbers to onboard peripherals */
-
-#define IRQ_USBOC	     IRQ_EINT19
-#define IRQ_IDE0	     IRQ_EINT16
-#define IRQ_IDE1	     IRQ_EINT17
-#define IRQ_VR1000_SERIAL    IRQ_EINT12
-#define IRQ_VR1000_DM9000A   IRQ_EINT10
-#define IRQ_VR1000_DM9000N   IRQ_EINT9
-#define IRQ_SMALERT	     IRQ_EINT8
-
-#endif /* __ASM_ARCH_VR1000IRQ_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h
deleted file mode 100644
index 28376e5..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/vr1000-map.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Machine VR1000 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x13000000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space. We also have the board's CPLD to find register space
- * for.
- */
-
-#ifndef __ASM_ARCH_VR1000MAP_H
-#define __ASM_ARCH_VR1000MAP_H
-
-#include <mach/bast-map.h>
-
-#define VR1000_IOADDR(x) BAST_IOADDR(x)
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define VR1000_VA_CTRL1	    VR1000_IOADDR(0x00000000)	 /* 0x01300000 */
-#define VR1000_PA_CTRL1	    (S3C2410_CS5 | 0x7800000)
-
-#define VR1000_VA_CTRL2	    VR1000_IOADDR(0x00100000)	 /* 0x01400000 */
-#define VR1000_PA_CTRL2	    (S3C2410_CS1 | 0x6000000)
-
-#define VR1000_VA_CTRL3	    VR1000_IOADDR(0x00200000)	 /* 0x01500000 */
-#define VR1000_PA_CTRL3	    (S3C2410_CS1 | 0x6800000)
-
-#define VR1000_VA_CTRL4	    VR1000_IOADDR(0x00300000)	 /* 0x01600000 */
-#define VR1000_PA_CTRL4	    (S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define VR1000_PA_PC104_IRQREQ  (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
-#define VR1000_VA_PC104_IRQREQ  VR1000_IOADDR(0x00400000)
-
-#define VR1000_PA_PC104_IRQRAW  (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
-#define VR1000_VA_PC104_IRQRAW  VR1000_IOADDR(0x00500000)
-
-#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
-#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
-
-/* 0xE0000000 contains the IO space that is split by speed and
- * whether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000  8bit,  slow
- * 0x04000000 to 0x08000000  16bit, slow
- * 0x08000000 to 0x0C000000  16bit, net
- * 0x0C000000 to 0x10000000  16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x02000000 to 0x02100000 1MB  IDE primary channel
- * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB  IDE secondary channel
- * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
- * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controllers
- * 0x02600000 to 0x02700000 1MB
- *
- * the phyiscal layout of the zones are:
- *  nGCS2 - 8bit, slow
- *  nGCS3 - 16bit, slow
- *  nGCS4 - 16bit, net
- *  nGCS5 - 16bit, fast
- */
-
-#define VR1000_VA_MULTISPACE (0xE0000000)
-
-#define VR1000_VA_ISAIO		   (VR1000_VA_MULTISPACE + 0x00000000)
-#define VR1000_VA_ISAMEM	   (VR1000_VA_MULTISPACE + 0x01000000)
-#define VR1000_VA_IDEPRI	   (VR1000_VA_MULTISPACE + 0x02000000)
-#define VR1000_VA_IDEPRIAUX	   (VR1000_VA_MULTISPACE + 0x02100000)
-#define VR1000_VA_IDESEC	   (VR1000_VA_MULTISPACE + 0x02200000)
-#define VR1000_VA_IDESECAUX	   (VR1000_VA_MULTISPACE + 0x02300000)
-#define VR1000_VA_ASIXNET	   (VR1000_VA_MULTISPACE + 0x02400000)
-#define VR1000_VA_DM9000	   (VR1000_VA_MULTISPACE + 0x02500000)
-#define VR1000_VA_SUPERIO	   (VR1000_VA_MULTISPACE + 0x02600000)
-
-/* physical offset addresses for the peripherals */
-
-#define VR1000_PA_IDEPRI	   (0x02000000)
-#define VR1000_PA_IDEPRIAUX	   (0x02800000)
-#define VR1000_PA_IDESEC	   (0x03000000)
-#define VR1000_PA_IDESECAUX	   (0x03800000)
-#define VR1000_PA_DM9000	   (0x05000000)
-
-#define VR1000_PA_SERIAL	   (0x11800000)
-#define VR1000_VA_SERIAL	   (VR1000_IOADDR(0x00700000))
-
-/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
-#define VR1000_PA_SRAM		   (S3C2410_CS1 | 0x05000000)
-
-/* some configurations for the peripherals */
-
-#define VR1000_DM9000_CS	 VR1000_VAM_CS4
-
-#endif /* __ASM_ARCH_VR1000MAP_H */
diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c
new file mode 100644
index 0000000..4cd13ab
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c
@@ -0,0 +1,478 @@
+/*
+ * Copyright (c) 2006-2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/seq_file.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+#include "regs-mem.h"
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2410_print_timing - print bank timing data for debug purposes
+ * @pfx: The prefix to put on the output
+ * @timings: The timing inforamtion to print.
+*/
+static void s3c2410_print_timing(const char *pfx,
+				 struct s3c_iotimings *timings)
+{
+	struct s3c2410_iobank_timing *bt;
+	int bank;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = timings->bank[bank].io_2410;
+		if (!bt)
+			continue;
+
+		printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, "
+		       "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank,
+		       print_ns(bt->tacs),
+		       print_ns(bt->tcos),
+		       print_ns(bt->tacc),
+		       print_ns(bt->tcoh),
+		       print_ns(bt->tcah));
+	}
+}
+
+/**
+ * bank_reg - convert bank number to pointer to the control register.
+ * @bank: The IO bank number.
+ */
+static inline void __iomem *bank_reg(unsigned int bank)
+{
+	return S3C2410_BANKCON0 + (bank << 2);
+}
+
+/**
+ * bank_is_io - test whether bank is used for IO
+ * @bankcon: The bank control register.
+ *
+ * This is a simplistic test to see if any BANKCON[x] is not an IO
+ * bank. It currently does not take into account whether BWSCON has
+ * an illegal width-setting in it, or if the pin connected to nCS[x]
+ * is actually being handled as a chip-select.
+ */
+static inline int bank_is_io(unsigned long bankcon)
+{
+	return !(bankcon & S3C2410_BANKCON_SDRAM);
+}
+
+/**
+ * to_div - convert cycle time to divisor
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ *
+ * Convert the given cycle time into the divisor to use to obtain it from
+ * HCLK.
+*/
+static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns)
+{
+	if (cyc == 0)
+		return 0;
+
+	return DIV_ROUND_UP(cyc, hclk_tns);
+}
+
+/**
+ * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ * @shift: The shift to get to the control bits.
+ *
+ * Calculate the divisor, and turn it into the correct control bits to
+ * set in the result, @v.
+ */
+static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
+			      unsigned long *v, int shift)
+{
+	unsigned int div = to_div(cyc, hclk_tns);
+	unsigned long val;
+
+	s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n",
+		       __func__, cyc, hclk_tns, shift, div);
+
+	switch (div) {
+	case 0:
+		val = 0;
+		break;
+	case 1:
+		val = 1;
+		break;
+	case 2:
+		val = 2;
+		break;
+	case 3:
+	case 4:
+		val = 3;
+		break;
+	default:
+		return -1;
+	}
+
+	*v |= val << shift;
+	return 0;
+}
+
+int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
+{
+	/* Currently no support for Tacp calculations. */
+	return 0;
+}
+
+/**
+ * calc_tacc - calculate divisor control for tacc.
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @nwait_en: IS nWAIT enabled for this bank.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ *
+ * Calculate the divisor control for tACC, taking into account whether
+ * the bank has nWAIT enabled. The result is used to modify the value
+ * pointed to by @v.
+*/
+static int calc_tacc(unsigned int cyc, int nwait_en,
+		     unsigned long hclk_tns, unsigned long *v)
+{
+	unsigned int div = to_div(cyc, hclk_tns);
+	unsigned long val;
+
+	s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n",
+		       __func__, cyc, nwait_en, hclk_tns, div);
+
+	/* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */
+	if (nwait_en && div < 4)
+		div = 4;
+
+	switch (div) {
+	case 0:
+		val = 0;
+		break;
+
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+		val = div - 1;
+		break;
+
+	case 5:
+	case 6:
+		val = 4;
+		break;
+
+	case 7:
+	case 8:
+		val = 5;
+		break;
+
+	case 9:
+	case 10:
+		val = 6;
+		break;
+
+	case 11:
+	case 12:
+	case 13:
+	case 14:
+		val = 7;
+		break;
+
+	default:
+		return -1;
+	}
+
+	*v |= val << 8;
+	return 0;
+}
+
+/**
+ * s3c2410_calc_bank - calculate bank timing infromation
+ * @cfg: The configuration we need to calculate for.
+ * @bt: The bank timing information.
+ *
+ * Given the cycle timine for a bank @bt, calculate the new BANKCON
+ * setting for the @cfg timing. This updates the timing information
+ * ready for the cpu frequency change.
+ */
+static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg,
+			     struct s3c2410_iobank_timing *bt)
+{
+	unsigned long hclk = cfg->freq.hclk_tns;
+	unsigned long res;
+	int ret;
+
+	res  = bt->bankcon;
+	res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16);
+
+	/* tacp: 2,3,4,5 */
+	/* tcah: 0,1,2,4 */
+	/* tcoh: 0,1,2,4 */
+	/* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */
+	/* tcos: 0,1,2,4 */
+	/* tacs: 0,1,2,4 */
+
+	ret  = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT);
+	ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT);
+	ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT);
+	ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT);
+
+	if (ret)
+		return -EINVAL;
+
+	ret |= calc_tacp(bt->tacp, hclk, &res);
+	ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res);
+
+	if (ret)
+		return -EINVAL;
+
+	bt->bankcon = res;
+	return 0;
+}
+
+static unsigned int tacc_tab[] = {
+	[0]	= 1,
+	[1]	= 2,
+	[2]	= 3,
+	[3]	= 4,
+	[4]	= 6,
+	[5]	= 9,
+	[6]	= 10,
+	[7]	= 14,
+};
+
+/**
+ * get_tacc - turn tACC value into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_tacc(unsigned long hclk_tns,
+			     unsigned long val)
+{
+	val &= 7;
+	return hclk_tns * tacc_tab[val];
+}
+
+/**
+ * get_0124 - turn 0/1/2/4 divider into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_0124(unsigned long hclk_tns,
+			     unsigned long val)
+{
+	val &= 3;
+	return hclk_tns * ((val == 3) ? 4 : val);
+}
+
+/**
+ * s3c2410_iotiming_getbank - turn BANKCON into cycle time information
+ * @cfg: The frequency configuration
+ * @bt: The bank timing to fill in (uses cached BANKCON)
+ *
+ * Given the BANKCON setting in @bt and the current frequency settings
+ * in @cfg, update the cycle timing information.
+ */
+void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+			      struct s3c2410_iobank_timing *bt)
+{
+	unsigned long bankcon = bt->bankcon;
+	unsigned long hclk = cfg->freq.hclk_tns;
+
+	bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+	bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+	bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+	bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+	bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+}
+
+/**
+ * s3c2410_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+ */
+void s3c2410_iotiming_debugfs(struct seq_file *seq,
+			      struct s3c_cpufreq_config *cfg,
+			      union s3c_iobank *iob)
+{
+	struct s3c2410_iobank_timing *bt = iob->io_2410;
+	unsigned long bankcon = bt->bankcon;
+	unsigned long hclk = cfg->freq.hclk_tns;
+	unsigned int tacs;
+	unsigned int tcos;
+	unsigned int tacc;
+	unsigned int tcoh;
+	unsigned int tcah;
+
+	seq_printf(seq, "BANKCON=0x%08lx\n", bankcon);
+
+	tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+	tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+	tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+	tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+	tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+
+	seq_printf(seq,
+		   "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+		   print_ns(bt->tacs),
+		   print_ns(bt->tcos),
+		   print_ns(bt->tacc),
+		   print_ns(bt->tcoh),
+		   print_ns(bt->tcah));
+
+	seq_printf(seq,
+		   "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+		   print_ns(tacs),
+		   print_ns(tcos),
+		   print_ns(tacc),
+		   print_ns(tcoh),
+		   print_ns(tcah));
+}
+
+/**
+ * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to fill out.
+ *
+ * Calculate the new values for the banks in @iot based on the new
+ * frequency information in @cfg. This is then used by s3c2410_iotiming_set()
+ * to update the timing when necessary.
+ */
+int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2410_iobank_timing *bt;
+	unsigned long bankcon;
+	int bank;
+	int ret;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bankcon = __raw_readl(bank_reg(bank));
+		bt = iot->bank[bank].io_2410;
+
+		if (!bt)
+			continue;
+
+		bt->bankcon = bankcon;
+
+		ret = s3c2410_calc_bank(cfg, bt);
+		if (ret) {
+			printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+			       __func__, bank);
+			goto err;
+		}
+
+		s3c_freq_iodbg("%s: bank %d: con=%08lx\n",
+			       __func__, bank, bt->bankcon);
+	}
+
+	return 0;
+ err:
+	return ret;
+}
+
+/**
+ * s3c2410_iotiming_set - set the IO timings from the given setup.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to use.
+ *
+ * Set all the currently used IO bank timing information generated
+ * by s3c2410_iotiming_calc() once the core has validated that all
+ * the new values are within permitted bounds.
+ */
+void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2410_iobank_timing *bt;
+	int bank;
+
+	/* set the io timings from the specifier */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2410;
+		if (!bt)
+			continue;
+
+		__raw_writel(bt->bankcon, bank_reg(bank));
+	}
+}
+
+/**
+ * s3c2410_iotiming_get - Get the timing information from current registers.
+ * @cfg: The frequency configuration
+ * @timings: The IO timing information to fill out.
+ *
+ * Calculate the @timings timing information from the current frequency
+ * information in @cfg, and the new frequency configur
+ * through all the IO banks, reading the state and then updating @iot
+ * as necessary.
+ *
+ * This is used at the moment on initialisation to get the current
+ * configuration so that boards do not have to carry their own setup
+ * if the timings are correct on initialisation.
+ */
+
+int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+			 struct s3c_iotimings *timings)
+{
+	struct s3c2410_iobank_timing *bt;
+	unsigned long bankcon;
+	unsigned long bwscon;
+	int bank;
+
+	bwscon = __raw_readl(S3C2410_BWSCON);
+
+	/* look through all banks to see what is currently set. */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bankcon = __raw_readl(bank_reg(bank));
+
+		if (!bank_is_io(bankcon))
+			continue;
+
+		s3c_freq_iodbg("%s: bank %d: con %08lx\n",
+			       __func__, bank, bankcon);
+
+		bt = kzalloc(sizeof(struct s3c2410_iobank_timing), GFP_KERNEL);
+		if (!bt) {
+			printk(KERN_ERR "%s: no memory for bank\n", __func__);
+			return -ENOMEM;
+		}
+
+		/* find out in nWait is enabled for bank. */
+
+		if (bank != 0) {
+			unsigned long tmp  = S3C2410_BWSCON_GET(bwscon, bank);
+			if (tmp & S3C2410_BWSCON_WS)
+				bt->nwait_en = 1;
+		}
+
+		timings->bank[bank].io_2410 = bt;
+		bt->bankcon = bankcon;
+
+		s3c2410_iotiming_getbank(cfg, bt);
+	}
+
+	s3c2410_print_timing("get", timings);
+	return 0;
+}
diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
new file mode 100644
index 0000000..663436d
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
@@ -0,0 +1,285 @@
+/*
+ * Copyright (c) 2006-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412/S3C2443 (PL093 based) IO timing support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/seq_file.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#include <linux/amba/pl093.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+#include "s3c2412.h"
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2412_print_timing - print timing infromation via printk.
+ * @pfx: The prefix to print each line with.
+ * @iot: The IO timing information
+ */
+static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	unsigned int bank;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+		       "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
+		       print_ns(bt->idcy),
+		       print_ns(bt->wstrd),
+		       print_ns(bt->wstwr),
+		       print_ns(bt->wstoen),
+		       print_ns(bt->wstwen),
+		       print_ns(bt->wstbrd));
+	}
+}
+
+/**
+ * to_div - turn a cycle length into a divisor setting.
+ * @cyc_tns: The cycle time in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ */
+static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
+{
+	return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
+}
+
+/**
+ * calc_timing - calculate timing divisor value and check in range.
+ * @hwtm: The hardware timing in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ * @err: Pointer to err variable to update in event of failure.
+ */
+static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
+				unsigned int *err)
+{
+	unsigned int ret = to_div(hwtm, clk_tns);
+
+	if (ret > 0xf)
+		*err = -EINVAL;
+
+	return ret;
+}
+
+/**
+ * s3c2412_calc_bank - calculate the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @bt: The bank timing.
+ */
+static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
+			     struct s3c2412_iobank_timing *bt)
+{
+	unsigned int hclk = cfg->freq.hclk_tns;
+	int err = 0;
+
+	bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
+	bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
+	bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
+	bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
+	bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
+	bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
+
+	return err;
+}
+
+/**
+ * s3c2412_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+*/
+void s3c2412_iotiming_debugfs(struct seq_file *seq,
+			      struct s3c_cpufreq_config *cfg,
+			      union s3c_iobank *iob)
+{
+	struct s3c2412_iobank_timing *bt = iob->io_2412;
+
+	seq_printf(seq,
+		   "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+		   "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n",
+		   print_ns(bt->idcy),
+		   print_ns(bt->wstrd),
+		   print_ns(bt->wstwr),
+		   print_ns(bt->wstoen),
+		   print_ns(bt->wstwen),
+		   print_ns(bt->wstbrd));
+}
+
+/**
+ * s3c2412_iotiming_calc - calculate all the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Calculate the timing information for all the banks that are
+ * configured as IO, using s3c2412_calc_bank().
+ */
+int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	int bank;
+	int ret;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		ret = s3c2412_calc_bank(cfg, bt);
+		if (ret) {
+			printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+			       __func__, bank);
+			goto err;
+		}
+	}
+
+	return 0;
+ err:
+	return ret;
+}
+
+/**
+ * s3c2412_iotiming_set - set the timing information
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Set the IO bank information from the details calculated earlier from
+ * calling s3c2412_iotiming_calc().
+ */
+void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	void __iomem *regs;
+	int bank;
+
+	/* set the io timings from the specifier */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		regs = S3C2412_SSMC_BANK(bank);
+
+		__raw_writel(bt->smbidcyr, regs + SMBIDCYR);
+		__raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
+		__raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
+		__raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
+		__raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
+		__raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
+	}
+}
+
+static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
+{
+	return (reg & 0xf) * clock;
+}
+
+static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+				     struct s3c2412_iobank_timing *bt,
+				     unsigned int bank)
+{
+	unsigned long clk = cfg->freq.hclk_tns;  /* ssmc clock??? */
+	void __iomem *regs = S3C2412_SSMC_BANK(bank);
+
+	bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
+	bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
+	bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
+	bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
+	bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
+}
+
+/**
+ * bank_is_io - return true if bank is (possibly) IO.
+ * @bank: The bank number.
+ * @bankcfg: The value of S3C2412_EBI_BANKCFG.
+ */
+static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
+{
+	if (bank < 2)
+		return true;
+
+	return !(bankcfg & (1 << bank));
+}
+
+int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+			 struct s3c_iotimings *timings)
+{
+	struct s3c2412_iobank_timing *bt;
+	u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
+	unsigned int bank;
+
+	/* look through all banks to see what is currently set. */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		if (!bank_is_io(bank, bankcfg))
+			continue;
+
+		bt = kzalloc(sizeof(struct s3c2412_iobank_timing), GFP_KERNEL);
+		if (!bt) {
+			printk(KERN_ERR "%s: no memory for bank\n", __func__);
+			return -ENOMEM;
+		}
+
+		timings->bank[bank].io_2412 = bt;
+		s3c2412_iotiming_getbank(cfg, bt, bank);
+	}
+
+	s3c2412_print_timing("get", timings);
+	return 0;
+}
+
+/* this is in here as it is so small, it doesn't currently warrant a file
+ * to itself. We expect that any s3c24xx needing this is going to also
+ * need the iotiming support.
+ */
+void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	u32 refresh;
+
+	WARN_ON(board == NULL);
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * down to ensure that we do not overflow 32 bit numbers.
+	 *
+	 * This should work for HCLK up to 133MHz and refresh period up
+	 * to 30usec.
+	 */
+
+	refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+	refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
+	refresh &= ((1 << 16) - 1);
+
+	s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
+
+	__raw_writel(refresh, S3C2412_REFRESH);
+}
diff --git a/arch/arm/mach-s3c24xx/irq-pm.c b/arch/arm/mach-s3c24xx/irq-pm.c
index 0efb2e2..e119959 100644
--- a/arch/arm/mach-s3c24xx/irq-pm.c
+++ b/arch/arm/mach-s3c24xx/irq-pm.c
@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/syscore_ops.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
@@ -29,18 +30,18 @@
  * set bit to 1 in allow bitfield to enable the wakeup settings on it
 */
 
-unsigned long s3c_irqwake_intallow	= 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
+unsigned long s3c_irqwake_intallow	= 1L << 30 | 0xfL;
 unsigned long s3c_irqwake_eintallow	= 0x0000fff0L;
 
 int s3c_irq_wake(struct irq_data *data, unsigned int state)
 {
-	unsigned long irqbit = 1 << (data->irq - IRQ_EINT0);
+	unsigned long irqbit = 1 << data->hwirq;
 
 	if (!(s3c_irqwake_intallow & irqbit))
 		return -ENOENT;
 
-	printk(KERN_INFO "wake %s for irq %d\n",
-	       state ? "enabled" : "disabled", data->irq);
+	pr_info("wake %s for hwirq %lu\n",
+		state ? "enabled" : "disabled", data->hwirq);
 
 	if (!state)
 		s3c_irqwake_intmask |= irqbit;
@@ -64,7 +65,7 @@ static unsigned long save_extint[3];
 static unsigned long save_eintflt[4];
 static unsigned long save_eintmask;
 
-int s3c24xx_irq_suspend(void)
+static int s3c24xx_irq_suspend(void)
 {
 	unsigned int i;
 
@@ -80,7 +81,7 @@ int s3c24xx_irq_suspend(void)
 	return 0;
 }
 
-void s3c24xx_irq_resume(void)
+static void s3c24xx_irq_resume(void)
 {
 	unsigned int i;
 
@@ -93,3 +94,31 @@ void s3c24xx_irq_resume(void)
 	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
 	__raw_writel(save_eintmask, S3C24XX_EINTMASK);
 }
+
+struct syscore_ops s3c24xx_irq_syscore_ops = {
+	.suspend	= s3c24xx_irq_suspend,
+	.resume		= s3c24xx_irq_resume,
+};
+
+#ifdef CONFIG_CPU_S3C2416
+static struct sleep_save s3c2416_irq_save[] = {
+	SAVE_ITEM(S3C2416_INTMSK2),
+};
+
+static int s3c2416_irq_suspend(void)
+{
+	s3c_pm_do_save(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save));
+
+	return 0;
+}
+
+static void s3c2416_irq_resume(void)
+{
+	s3c_pm_do_restore(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save));
+}
+
+struct syscore_ops s3c2416_irq_syscore_ops = {
+	.suspend	= s3c2416_irq_suspend,
+	.resume		= s3c2416_irq_resume,
+};
+#endif
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2412.c b/arch/arm/mach-s3c24xx/irq-s3c2412.c
index e65619d..67d7631 100644
--- a/arch/arm/mach-s3c24xx/irq-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/irq-s3c2412.c
@@ -33,12 +33,13 @@
 
 #include <mach/regs-irq.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-power.h>
 
 #include <plat/cpu.h>
 #include <plat/irq.h>
 #include <plat/pm.h>
 
+#include "s3c2412-power.h"
+
 #define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
 #define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0))))
 
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2416.c b/arch/arm/mach-s3c24xx/irq-s3c2416.c
deleted file mode 100644
index ff141b0..0000000
--- a/arch/arm/mach-s3c24xx/irq-s3c2416.c
+++ /dev/null
@@ -1,348 +0,0 @@
-/* linux/arch/arm/mach-s3c2416/irq.c
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
- *	as part of OpenInkpot project
- * Copyright (c) 2009 Promwad Innovation Company
- *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
-
-static inline void s3c2416_irq_demux(unsigned int irq, unsigned int len)
-{
-	unsigned int subsrc, submsk;
-	unsigned int end;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc  &= ~submsk;
-	subsrc >>= (irq - S3C2410_IRQSUB(0));
-	subsrc  &= (1 << len)-1;
-
-	end = len + irq;
-
-	for (; irq < end && subsrc; irq++) {
-		if (subsrc & 1)
-			generic_handle_irq(irq);
-
-		subsrc >>= 1;
-	}
-}
-
-/* WDT/AC97 sub interrupts */
-
-static void s3c2416_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2416_irq_demux(IRQ_S3C2443_WDT, 4);
-}
-
-#define INTMSK_WDTAC97	(1UL << (IRQ_WDT - IRQ_EINT0))
-#define SUBMSK_WDTAC97	INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97)
-
-static void s3c2416_irq_wdtac97_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static void s3c2416_irq_wdtac97_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_WDTAC97);
-}
-
-static void s3c2416_irq_wdtac97_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static struct irq_chip s3c2416_irq_wdtac97 = {
-	.irq_mask	= s3c2416_irq_wdtac97_mask,
-	.irq_unmask	= s3c2416_irq_wdtac97_unmask,
-	.irq_ack	= s3c2416_irq_wdtac97_ack,
-};
-
-/* LCD sub interrupts */
-
-static void s3c2416_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2416_irq_demux(IRQ_S3C2443_LCD1, 4);
-}
-
-#define INTMSK_LCD	(1UL << (IRQ_LCD - IRQ_EINT0))
-#define SUBMSK_LCD	INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4)
-
-static void s3c2416_irq_lcd_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static void s3c2416_irq_lcd_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_LCD);
-}
-
-static void s3c2416_irq_lcd_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static struct irq_chip s3c2416_irq_lcd = {
-	.irq_mask	= s3c2416_irq_lcd_mask,
-	.irq_unmask	= s3c2416_irq_lcd_unmask,
-	.irq_ack	= s3c2416_irq_lcd_ack,
-};
-
-/* DMA sub interrupts */
-
-static void s3c2416_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2416_irq_demux(IRQ_S3C2443_DMA0, 6);
-}
-
-#define INTMSK_DMA	(1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))
-#define SUBMSK_DMA	INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5)
-
-
-static void s3c2416_irq_dma_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static void s3c2416_irq_dma_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_DMA);
-}
-
-static void s3c2416_irq_dma_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static struct irq_chip s3c2416_irq_dma = {
-	.irq_mask	= s3c2416_irq_dma_mask,
-	.irq_unmask	= s3c2416_irq_dma_unmask,
-	.irq_ack	= s3c2416_irq_dma_ack,
-};
-
-/* UART3 sub interrupts */
-
-static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2416_irq_demux(IRQ_S3C2443_RX3, 3);
-}
-
-#define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3	(0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
-static void s3c2416_irq_uart3_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static void s3c2416_irq_uart3_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_UART3);
-}
-
-static void s3c2416_irq_uart3_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static struct irq_chip s3c2416_irq_uart3 = {
-	.irq_mask	= s3c2416_irq_uart3_mask,
-	.irq_unmask	= s3c2416_irq_uart3_unmask,
-	.irq_ack	= s3c2416_irq_uart3_ack,
-};
-
-/* second interrupt register */
-
-static inline void s3c2416_irq_ack_second(struct irq_data *data)
-{
-	unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D);
-
-	__raw_writel(bitval, S3C2416_SRCPND2);
-	__raw_writel(bitval, S3C2416_INTPND2);
-}
-
-static void s3c2416_irq_mask_second(struct irq_data *data)
-{
-	unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D);
-	unsigned long mask;
-
-	mask = __raw_readl(S3C2416_INTMSK2);
-	mask |= bitval;
-	__raw_writel(mask, S3C2416_INTMSK2);
-}
-
-static void s3c2416_irq_unmask_second(struct irq_data *data)
-{
-	unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D);
-	unsigned long mask;
-
-	mask = __raw_readl(S3C2416_INTMSK2);
-	mask &= ~bitval;
-	__raw_writel(mask, S3C2416_INTMSK2);
-}
-
-struct irq_chip s3c2416_irq_second = {
-	.irq_ack	= s3c2416_irq_ack_second,
-	.irq_mask	= s3c2416_irq_mask_second,
-	.irq_unmask	= s3c2416_irq_unmask_second,
-};
-
-
-/* IRQ initialisation code */
-
-static int s3c2416_add_sub(unsigned int base,
-				   void (*demux)(unsigned int,
-						 struct irq_desc *),
-				   struct irq_chip *chip,
-				   unsigned int start, unsigned int end)
-{
-	unsigned int irqno;
-
-	irq_set_chip_and_handler(base, &s3c_irq_level_chip, handle_level_irq);
-	irq_set_chained_handler(base, demux);
-
-	for (irqno = start; irqno <= end; irqno++) {
-		irq_set_chip_and_handler(irqno, chip, handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	return 0;
-}
-
-static void s3c2416_irq_add_second(void)
-{
-	unsigned long pend;
-	unsigned long last;
-	int irqno;
-	int i;
-
-	/* first, clear all interrupts pending... */
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(S3C2416_INTPND2);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		__raw_writel(pend, S3C2416_SRCPND2);
-		__raw_writel(pend, S3C2416_INTPND2);
-		printk(KERN_INFO "irq: clearing pending status %08x\n",
-		       (int)pend);
-		last = pend;
-	}
-
-	for (irqno = IRQ_S3C2416_2D; irqno <= IRQ_S3C2416_I2S1; irqno++) {
-		switch (irqno) {
-		case IRQ_S3C2416_RESERVED2:
-		case IRQ_S3C2416_RESERVED3:
-			/* no IRQ here */
-			break;
-		default:
-			irq_set_chip_and_handler(irqno, &s3c2416_irq_second,
-						 handle_edge_irq);
-			set_irq_flags(irqno, IRQF_VALID);
-		}
-	}
-}
-
-static int s3c2416_irq_add(struct device *dev,
-				  struct subsys_interface *sif)
-{
-	printk(KERN_INFO "S3C2416: IRQ Support\n");
-
-	s3c2416_add_sub(IRQ_LCD, s3c2416_irq_demux_lcd, &s3c2416_irq_lcd,
-			IRQ_S3C2443_LCD2, IRQ_S3C2443_LCD4);
-
-	s3c2416_add_sub(IRQ_S3C2443_DMA, s3c2416_irq_demux_dma,
-			&s3c2416_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5);
-
-	s3c2416_add_sub(IRQ_S3C2443_UART3, s3c2416_irq_demux_uart3,
-			&s3c2416_irq_uart3,
-			IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3);
-
-	s3c2416_add_sub(IRQ_WDT, s3c2416_irq_demux_wdtac97,
-			&s3c2416_irq_wdtac97,
-			IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
-
-	s3c2416_irq_add_second();
-
-	return 0;
-}
-
-static struct subsys_interface s3c2416_irq_interface = {
-	.name		= "s3c2416_irq",
-	.subsys		= &s3c2416_subsys,
-	.add_dev	= s3c2416_irq_add,
-};
-
-static int __init s3c2416_irq_init(void)
-{
-	return subsys_interface_register(&s3c2416_irq_interface);
-}
-
-arch_initcall(s3c2416_irq_init);
-
-#ifdef CONFIG_PM
-static struct sleep_save irq_save[] = {
-	SAVE_ITEM(S3C2416_INTMSK2),
-};
-
-int s3c2416_irq_suspend(void)
-{
-	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
-
-	return 0;
-}
-
-void s3c2416_irq_resume(void)
-{
-	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
-}
-
-struct syscore_ops s3c2416_irq_syscore_ops = {
-	.suspend	= s3c2416_irq_suspend,
-	.resume		= s3c2416_irq_resume,
-};
-#endif
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2443.c b/arch/arm/mach-s3c24xx/irq-s3c2443.c
deleted file mode 100644
index 5e69109..0000000
--- a/arch/arm/mach-s3c24xx/irq-s3c2443.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/* linux/arch/arm/mach-s3c2443/irq.c
- *
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
-
-static inline void s3c2443_irq_demux(unsigned int irq, unsigned int len)
-{
-	unsigned int subsrc, submsk;
-	unsigned int end;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc  &= ~submsk;
-	subsrc >>= (irq - S3C2410_IRQSUB(0));
-	subsrc  &= (1 << len)-1;
-
-	end = len + irq;
-
-	for (; irq < end && subsrc; irq++) {
-		if (subsrc & 1)
-			generic_handle_irq(irq);
-
-		subsrc >>= 1;
-	}
-}
-
-/* WDT/AC97 sub interrupts */
-
-static void s3c2443_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2443_irq_demux(IRQ_S3C2443_WDT, 4);
-}
-
-#define INTMSK_WDTAC97	(1UL << (IRQ_WDT - IRQ_EINT0))
-#define SUBMSK_WDTAC97	INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97)
-
-static void s3c2443_irq_wdtac97_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static void s3c2443_irq_wdtac97_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_WDTAC97);
-}
-
-static void s3c2443_irq_wdtac97_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static struct irq_chip s3c2443_irq_wdtac97 = {
-	.irq_mask	= s3c2443_irq_wdtac97_mask,
-	.irq_unmask	= s3c2443_irq_wdtac97_unmask,
-	.irq_ack	= s3c2443_irq_wdtac97_ack,
-};
-
-/* LCD sub interrupts */
-
-static void s3c2443_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2443_irq_demux(IRQ_S3C2443_LCD1, 4);
-}
-
-#define INTMSK_LCD	(1UL << (IRQ_LCD - IRQ_EINT0))
-#define SUBMSK_LCD	INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4)
-
-static void s3c2443_irq_lcd_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static void s3c2443_irq_lcd_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_LCD);
-}
-
-static void s3c2443_irq_lcd_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static struct irq_chip s3c2443_irq_lcd = {
-	.irq_mask	= s3c2443_irq_lcd_mask,
-	.irq_unmask	= s3c2443_irq_lcd_unmask,
-	.irq_ack	= s3c2443_irq_lcd_ack,
-};
-
-/* DMA sub interrupts */
-
-static void s3c2443_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2443_irq_demux(IRQ_S3C2443_DMA0, 6);
-}
-
-#define INTMSK_DMA	(1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))
-#define SUBMSK_DMA	INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5)
-
-static void s3c2443_irq_dma_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static void s3c2443_irq_dma_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_DMA);
-}
-
-static void s3c2443_irq_dma_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static struct irq_chip s3c2443_irq_dma = {
-	.irq_mask	= s3c2443_irq_dma_mask,
-	.irq_unmask	= s3c2443_irq_dma_unmask,
-	.irq_ack	= s3c2443_irq_dma_ack,
-};
-
-/* UART3 sub interrupts */
-
-static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2443_irq_demux(IRQ_S3C2443_RX3, 3);
-}
-
-#define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3	(0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
-static void s3c2443_irq_uart3_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static void s3c2443_irq_uart3_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_UART3);
-}
-
-static void s3c2443_irq_uart3_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static struct irq_chip s3c2443_irq_uart3 = {
-	.irq_mask	= s3c2443_irq_uart3_mask,
-	.irq_unmask	= s3c2443_irq_uart3_unmask,
-	.irq_ack	= s3c2443_irq_uart3_ack,
-};
-
-/* CAM sub interrupts */
-
-static void s3c2443_irq_demux_cam(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2443_irq_demux(IRQ_S3C2440_CAM_C, 4);
-}
-
-#define INTMSK_CAM	(1UL << (IRQ_CAM - IRQ_EINT0))
-#define SUBMSK_CAM	INTMSK(IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P)
-
-static void s3c2443_irq_cam_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_CAM, SUBMSK_CAM);
-}
-
-static void s3c2443_irq_cam_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_CAM);
-}
-
-static void s3c2443_irq_cam_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_CAM, SUBMSK_CAM);
-}
-
-static struct irq_chip s3c2443_irq_cam = {
-	.irq_mask	= s3c2443_irq_cam_mask,
-	.irq_unmask	= s3c2443_irq_cam_unmask,
-	.irq_ack	= s3c2443_irq_cam_ack,
-};
-
-/* IRQ initialisation code */
-
-static int s3c2443_add_sub(unsigned int base,
-				   void (*demux)(unsigned int,
-						 struct irq_desc *),
-				   struct irq_chip *chip,
-				   unsigned int start, unsigned int end)
-{
-	unsigned int irqno;
-
-	irq_set_chip_and_handler(base, &s3c_irq_level_chip, handle_level_irq);
-	irq_set_chained_handler(base, demux);
-
-	for (irqno = start; irqno <= end; irqno++) {
-		irq_set_chip_and_handler(irqno, chip, handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	return 0;
-}
-
-static int s3c2443_irq_add(struct device *dev,
-				  struct subsys_interface *sif)
-{
-	printk("S3C2443: IRQ Support\n");
-
-	s3c2443_add_sub(IRQ_CAM, s3c2443_irq_demux_cam, &s3c2443_irq_cam,
-			IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P);
-
-	s3c2443_add_sub(IRQ_LCD, s3c2443_irq_demux_lcd, &s3c2443_irq_lcd,
-			IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4);
-
-	s3c2443_add_sub(IRQ_S3C2443_DMA, s3c2443_irq_demux_dma,
-			&s3c2443_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5);
-
-	s3c2443_add_sub(IRQ_S3C2443_UART3, s3c2443_irq_demux_uart3,
-			&s3c2443_irq_uart3,
-			IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3);
-
-	s3c2443_add_sub(IRQ_WDT, s3c2443_irq_demux_wdtac97,
-			&s3c2443_irq_wdtac97,
-			IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
-
-	return 0;
-}
-
-static struct subsys_interface s3c2443_irq_interface = {
-	.name		= "s3c2443_irq",
-	.subsys		= &s3c2443_subsys,
-	.add_dev	= s3c2443_irq_add,
-};
-
-static int __init s3c2443_irq_init(void)
-{
-	return subsys_interface_register(&s3c2443_irq_interface);
-}
-
-arch_initcall(s3c2443_irq_init);
-
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
new file mode 100644
index 0000000..cb9f5e0
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -0,0 +1,822 @@
+/*
+ * S3C24XX IRQ handling
+ *
+ * Copyright (c) 2003-2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/irqdomain.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/regs-irqtype.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
+
+#define S3C_IRQTYPE_NONE	0
+#define S3C_IRQTYPE_EINT	1
+#define S3C_IRQTYPE_EDGE	2
+#define S3C_IRQTYPE_LEVEL	3
+
+struct s3c_irq_data {
+	unsigned int type;
+	unsigned long parent_irq;
+
+	/* data gets filled during init */
+	struct s3c_irq_intc *intc;
+	unsigned long sub_bits;
+	struct s3c_irq_intc *sub_intc;
+};
+
+/*
+ * Sructure holding the controller data
+ * @reg_pending		register holding pending irqs
+ * @reg_intpnd		special register intpnd in main intc
+ * @reg_mask		mask register
+ * @domain		irq_domain of the controller
+ * @parent		parent controller for ext and sub irqs
+ * @irqs		irq-data, always s3c_irq_data[32]
+ */
+struct s3c_irq_intc {
+	void __iomem		*reg_pending;
+	void __iomem		*reg_intpnd;
+	void __iomem		*reg_mask;
+	struct irq_domain	*domain;
+	struct s3c_irq_intc	*parent;
+	struct s3c_irq_data	*irqs;
+};
+
+static void s3c_irq_mask(struct irq_data *data)
+{
+	struct s3c_irq_intc *intc = data->domain->host_data;
+	struct s3c_irq_intc *parent_intc = intc->parent;
+	struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq];
+	struct s3c_irq_data *parent_data;
+	unsigned long mask;
+	unsigned int irqno;
+
+	mask = __raw_readl(intc->reg_mask);
+	mask |= (1UL << data->hwirq);
+	__raw_writel(mask, intc->reg_mask);
+
+	if (parent_intc && irq_data->parent_irq) {
+		parent_data = &parent_intc->irqs[irq_data->parent_irq];
+
+		/* check to see if we need to mask the parent IRQ */
+		if ((mask & parent_data->sub_bits) == parent_data->sub_bits) {
+			irqno = irq_find_mapping(parent_intc->domain,
+					 irq_data->parent_irq);
+			s3c_irq_mask(irq_get_irq_data(irqno));
+		}
+	}
+}
+
+static void s3c_irq_unmask(struct irq_data *data)
+{
+	struct s3c_irq_intc *intc = data->domain->host_data;
+	struct s3c_irq_intc *parent_intc = intc->parent;
+	struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq];
+	unsigned long mask;
+	unsigned int irqno;
+
+	mask = __raw_readl(intc->reg_mask);
+	mask &= ~(1UL << data->hwirq);
+	__raw_writel(mask, intc->reg_mask);
+
+	if (parent_intc && irq_data->parent_irq) {
+		irqno = irq_find_mapping(parent_intc->domain,
+					 irq_data->parent_irq);
+		s3c_irq_unmask(irq_get_irq_data(irqno));
+	}
+}
+
+static inline void s3c_irq_ack(struct irq_data *data)
+{
+	struct s3c_irq_intc *intc = data->domain->host_data;
+	unsigned long bitval = 1UL << data->hwirq;
+
+	__raw_writel(bitval, intc->reg_pending);
+	if (intc->reg_intpnd)
+		__raw_writel(bitval, intc->reg_intpnd);
+}
+
+static int s3c_irqext_type_set(void __iomem *gpcon_reg,
+			       void __iomem *extint_reg,
+			       unsigned long gpcon_offset,
+			       unsigned long extint_offset,
+			       unsigned int type)
+{
+	unsigned long newvalue = 0, value;
+
+	/* Set the GPIO to external interrupt mode */
+	value = __raw_readl(gpcon_reg);
+	value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
+	__raw_writel(value, gpcon_reg);
+
+	/* Set the external interrupt to pointed trigger type */
+	switch (type)
+	{
+		case IRQ_TYPE_NONE:
+			pr_warn("No edge setting!\n");
+			break;
+
+		case IRQ_TYPE_EDGE_RISING:
+			newvalue = S3C2410_EXTINT_RISEEDGE;
+			break;
+
+		case IRQ_TYPE_EDGE_FALLING:
+			newvalue = S3C2410_EXTINT_FALLEDGE;
+			break;
+
+		case IRQ_TYPE_EDGE_BOTH:
+			newvalue = S3C2410_EXTINT_BOTHEDGE;
+			break;
+
+		case IRQ_TYPE_LEVEL_LOW:
+			newvalue = S3C2410_EXTINT_LOWLEV;
+			break;
+
+		case IRQ_TYPE_LEVEL_HIGH:
+			newvalue = S3C2410_EXTINT_HILEV;
+			break;
+
+		default:
+			pr_err("No such irq type %d", type);
+			return -EINVAL;
+	}
+
+	value = __raw_readl(extint_reg);
+	value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
+	__raw_writel(value, extint_reg);
+
+	return 0;
+}
+
+/* FIXME: make static when it's out of plat-samsung/irq.h */
+int s3c_irqext_type(struct irq_data *data, unsigned int type)
+{
+	void __iomem *extint_reg;
+	void __iomem *gpcon_reg;
+	unsigned long gpcon_offset, extint_offset;
+
+	if ((data->hwirq >= 4) && (data->hwirq <= 7)) {
+		gpcon_reg = S3C2410_GPFCON;
+		extint_reg = S3C24XX_EXTINT0;
+		gpcon_offset = (data->hwirq) * 2;
+		extint_offset = (data->hwirq) * 4;
+	} else if ((data->hwirq >= 8) && (data->hwirq <= 15)) {
+		gpcon_reg = S3C2410_GPGCON;
+		extint_reg = S3C24XX_EXTINT1;
+		gpcon_offset = (data->hwirq - 8) * 2;
+		extint_offset = (data->hwirq - 8) * 4;
+	} else if ((data->hwirq >= 16) && (data->hwirq <= 23)) {
+		gpcon_reg = S3C2410_GPGCON;
+		extint_reg = S3C24XX_EXTINT2;
+		gpcon_offset = (data->hwirq - 8) * 2;
+		extint_offset = (data->hwirq - 16) * 4;
+	} else {
+		return -EINVAL;
+	}
+
+	return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
+				   extint_offset, type);
+}
+
+static int s3c_irqext0_type(struct irq_data *data, unsigned int type)
+{
+	void __iomem *extint_reg;
+	void __iomem *gpcon_reg;
+	unsigned long gpcon_offset, extint_offset;
+
+	if ((data->hwirq >= 0) && (data->hwirq <= 3)) {
+		gpcon_reg = S3C2410_GPFCON;
+		extint_reg = S3C24XX_EXTINT0;
+		gpcon_offset = (data->hwirq) * 2;
+		extint_offset = (data->hwirq) * 4;
+	} else {
+		return -EINVAL;
+	}
+
+	return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
+				   extint_offset, type);
+}
+
+struct irq_chip s3c_irq_chip = {
+	.name		= "s3c",
+	.irq_ack	= s3c_irq_ack,
+	.irq_mask	= s3c_irq_mask,
+	.irq_unmask	= s3c_irq_unmask,
+	.irq_set_wake	= s3c_irq_wake
+};
+
+struct irq_chip s3c_irq_level_chip = {
+	.name		= "s3c-level",
+	.irq_mask	= s3c_irq_mask,
+	.irq_unmask	= s3c_irq_unmask,
+	.irq_ack	= s3c_irq_ack,
+};
+
+static struct irq_chip s3c_irqext_chip = {
+	.name		= "s3c-ext",
+	.irq_mask	= s3c_irq_mask,
+	.irq_unmask	= s3c_irq_unmask,
+	.irq_ack	= s3c_irq_ack,
+	.irq_set_type	= s3c_irqext_type,
+	.irq_set_wake	= s3c_irqext_wake
+};
+
+static struct irq_chip s3c_irq_eint0t4 = {
+	.name		= "s3c-ext0",
+	.irq_ack	= s3c_irq_ack,
+	.irq_mask	= s3c_irq_mask,
+	.irq_unmask	= s3c_irq_unmask,
+	.irq_set_wake	= s3c_irq_wake,
+	.irq_set_type	= s3c_irqext0_type,
+};
+
+static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct s3c_irq_intc *intc = desc->irq_data.domain->host_data;
+	struct s3c_irq_data *irq_data = &intc->irqs[desc->irq_data.hwirq];
+	struct s3c_irq_intc *sub_intc = irq_data->sub_intc;
+	unsigned long src;
+	unsigned long msk;
+	unsigned int n;
+
+	chained_irq_enter(chip, desc);
+
+	src = __raw_readl(sub_intc->reg_pending);
+	msk = __raw_readl(sub_intc->reg_mask);
+
+	src &= ~msk;
+	src &= irq_data->sub_bits;
+
+	while (src) {
+		n = __ffs(src);
+		src &= ~(1 << n);
+		generic_handle_irq(irq_find_mapping(sub_intc->domain, n));
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+#ifdef CONFIG_FIQ
+/**
+ * s3c24xx_set_fiq - set the FIQ routing
+ * @irq: IRQ number to route to FIQ on processor.
+ * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
+ *
+ * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
+ * @on is true, the @irq is checked to see if it can be routed and the
+ * interrupt controller updated to route the IRQ. If @on is false, the FIQ
+ * routing is cleared, regardless of which @irq is specified.
+ */
+int s3c24xx_set_fiq(unsigned int irq, bool on)
+{
+	u32 intmod;
+	unsigned offs;
+
+	if (on) {
+		offs = irq - FIQ_START;
+		if (offs > 31)
+			return -EINVAL;
+
+		intmod = 1 << offs;
+	} else {
+		intmod = 0;
+	}
+
+	__raw_writel(intmod, S3C2410_INTMOD);
+	return 0;
+}
+
+EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
+#endif
+
+static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
+							irq_hw_number_t hw)
+{
+	struct s3c_irq_intc *intc = h->host_data;
+	struct s3c_irq_data *irq_data = &intc->irqs[hw];
+	struct s3c_irq_intc *parent_intc;
+	struct s3c_irq_data *parent_irq_data;
+	unsigned int irqno;
+
+	if (!intc) {
+		pr_err("irq-s3c24xx: no controller found for hwirq %lu\n", hw);
+		return -EINVAL;
+	}
+
+	if (!irq_data) {
+		pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", hw);
+		return -EINVAL;
+	}
+
+	/* attach controller pointer to irq_data */
+	irq_data->intc = intc;
+
+	/* set handler and flags */
+	switch (irq_data->type) {
+	case S3C_IRQTYPE_NONE:
+		return 0;
+	case S3C_IRQTYPE_EINT:
+		if (irq_data->parent_irq)
+			irq_set_chip_and_handler(virq, &s3c_irqext_chip,
+						 handle_edge_irq);
+		else
+			irq_set_chip_and_handler(virq, &s3c_irq_eint0t4,
+						 handle_edge_irq);
+		break;
+	case S3C_IRQTYPE_EDGE:
+		if (irq_data->parent_irq ||
+		    intc->reg_pending == S3C2416_SRCPND2)
+			irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
+						 handle_edge_irq);
+		else
+			irq_set_chip_and_handler(virq, &s3c_irq_chip,
+						 handle_edge_irq);
+		break;
+	case S3C_IRQTYPE_LEVEL:
+		if (irq_data->parent_irq)
+			irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
+						 handle_level_irq);
+		else
+			irq_set_chip_and_handler(virq, &s3c_irq_chip,
+						 handle_level_irq);
+		break;
+	default:
+		pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type);
+		return -EINVAL;
+	}
+	set_irq_flags(virq, IRQF_VALID);
+
+	if (irq_data->parent_irq) {
+		parent_intc = intc->parent;
+		if (!parent_intc) {
+			pr_err("irq-s3c24xx: no parent controller found for hwirq %lu\n",
+			       hw);
+			goto err;
+		}
+
+		parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
+		if (!irq_data) {
+			pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n",
+			       hw);
+			goto err;
+		}
+
+		parent_irq_data->sub_intc = intc;
+		parent_irq_data->sub_bits |= (1UL << hw);
+
+		/* attach the demuxer to the parent irq */
+		irqno = irq_find_mapping(parent_intc->domain,
+					 irq_data->parent_irq);
+		if (!irqno) {
+			pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n",
+			       irq_data->parent_irq);
+			goto err;
+		}
+		irq_set_chained_handler(irqno, s3c_irq_demux);
+	}
+
+	return 0;
+
+err:
+	set_irq_flags(virq, 0);
+
+	/* the only error can result from bad mapping data*/
+	return -EINVAL;
+}
+
+static struct irq_domain_ops s3c24xx_irq_ops = {
+	.map = s3c24xx_irq_map,
+	.xlate = irq_domain_xlate_twocell,
+};
+
+static void s3c24xx_clear_intc(struct s3c_irq_intc *intc)
+{
+	void __iomem *reg_source;
+	unsigned long pend;
+	unsigned long last;
+	int i;
+
+	/* if intpnd is set, read the next pending irq from there */
+	reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending;
+
+	last = 0;
+	for (i = 0; i < 4; i++) {
+		pend = __raw_readl(reg_source);
+
+		if (pend == 0 || pend == last)
+			break;
+
+		__raw_writel(pend, intc->reg_pending);
+		if (intc->reg_intpnd)
+			__raw_writel(pend, intc->reg_intpnd);
+
+		pr_info("irq: clearing pending status %08x\n", (int)pend);
+		last = pend;
+	}
+}
+
+struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
+				       struct s3c_irq_data *irq_data,
+				       struct s3c_irq_intc *parent,
+				       unsigned long address)
+{
+	struct s3c_irq_intc *intc;
+	void __iomem *base = (void *)0xf6000000; /* static mapping */
+	int irq_num;
+	int irq_start;
+	int irq_offset;
+	int ret;
+
+	intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
+	if (!intc)
+		return ERR_PTR(-ENOMEM);
+
+	intc->irqs = irq_data;
+
+	if (parent)
+		intc->parent = parent;
+
+	/* select the correct data for the controller.
+	 * Need to hard code the irq num start and offset
+	 * to preserve the static mapping for now
+	 */
+	switch (address) {
+	case 0x4a000000:
+		pr_debug("irq: found main intc\n");
+		intc->reg_pending = base;
+		intc->reg_mask = base + 0x08;
+		intc->reg_intpnd = base + 0x10;
+		irq_num = 32;
+		irq_start = S3C2410_IRQ(0);
+		irq_offset = 0;
+		break;
+	case 0x4a000018:
+		pr_debug("irq: found subintc\n");
+		intc->reg_pending = base + 0x18;
+		intc->reg_mask = base + 0x1c;
+		irq_num = 29;
+		irq_start = S3C2410_IRQSUB(0);
+		irq_offset = 0;
+		break;
+	case 0x4a000040:
+		pr_debug("irq: found intc2\n");
+		intc->reg_pending = base + 0x40;
+		intc->reg_mask = base + 0x48;
+		intc->reg_intpnd = base + 0x50;
+		irq_num = 8;
+		irq_start = S3C2416_IRQ(0);
+		irq_offset = 0;
+		break;
+	case 0x560000a4:
+		pr_debug("irq: found eintc\n");
+		base = (void *)0xfd000000;
+
+		intc->reg_mask = base + 0xa4;
+		intc->reg_pending = base + 0x08;
+		irq_num = 20;
+		irq_start = S3C2410_IRQ(32);
+		irq_offset = 4;
+		break;
+	default:
+		pr_err("irq: unsupported controller address\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* now that all the data is complete, init the irq-domain */
+	s3c24xx_clear_intc(intc);
+	intc->domain = irq_domain_add_legacy(np, irq_num, irq_start,
+					     irq_offset, &s3c24xx_irq_ops,
+					     intc);
+	if (!intc->domain) {
+		pr_err("irq: could not create irq-domain\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	return intc;
+
+err:
+	kfree(intc);
+	return ERR_PTR(ret);
+}
+
+/* s3c24xx_init_irq
+ *
+ * Initialise S3C2410 IRQ system
+*/
+
+static struct s3c_irq_data init_base[32] = {
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* WDT */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_eint[32] = {
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
+};
+
+static struct s3c_irq_data init_subint[32] = {
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+};
+
+void __init s3c24xx_init_irq(void)
+{
+	struct s3c_irq_intc *main_intc;
+
+#ifdef CONFIG_FIQ
+	init_FIQ(FIQ_START);
+#endif
+
+	main_intc = s3c24xx_init_intc(NULL, &init_base[0], NULL, 0x4a000000);
+	if (IS_ERR(main_intc)) {
+		pr_err("irq: could not create main interrupt controller\n");
+		return;
+	}
+
+	s3c24xx_init_intc(NULL, &init_subint[0], main_intc, 0x4a000018);
+	s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+}
+
+#ifdef CONFIG_CPU_S3C2416
+static struct s3c_irq_data init_s3c2416base[32] = {
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* NAND */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+	{ .type = S3C_IRQTYPE_NONE, },
+	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_s3c2416subint[32] = {
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
+};
+
+static struct s3c_irq_data init_s3c2416_second[32] = {
+	{ .type = S3C_IRQTYPE_EDGE }, /* 2D */
+	{ .type = S3C_IRQTYPE_EDGE }, /* IIC1 */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE }, /* PCM0 */
+	{ .type = S3C_IRQTYPE_EDGE }, /* PCM1 */
+	{ .type = S3C_IRQTYPE_EDGE }, /* I2S0 */
+	{ .type = S3C_IRQTYPE_EDGE }, /* I2S1 */
+};
+
+void __init s3c2416_init_irq(void)
+{
+	struct s3c_irq_intc *main_intc;
+
+	pr_info("S3C2416: IRQ Support\n");
+
+#ifdef CONFIG_FIQ
+	init_FIQ(FIQ_START);
+#endif
+
+	main_intc = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, 0x4a000000);
+	if (IS_ERR(main_intc)) {
+		pr_err("irq: could not create main interrupt controller\n");
+		return;
+	}
+
+	s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+	s3c24xx_init_intc(NULL, &init_s3c2416subint[0], main_intc, 0x4a000018);
+
+	s3c24xx_init_intc(NULL, &init_s3c2416_second[0], NULL, 0x4a000040);
+}
+
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+static struct s3c_irq_data init_s3c2443base[32] = {
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* CFON */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* NAND */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+
+static struct s3c_irq_data init_s3c2443subint[32] = {
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
+};
+
+void __init s3c2443_init_irq(void)
+{
+	struct s3c_irq_intc *main_intc;
+
+	pr_info("S3C2443: IRQ Support\n");
+
+#ifdef CONFIG_FIQ
+	init_FIQ(FIQ_START);
+#endif
+
+	main_intc = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, 0x4a000000);
+	if (IS_ERR(main_intc)) {
+		pr_err("irq: could not create main interrupt controller\n");
+		return;
+	}
+
+	s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+	s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018);
+}
+#endif
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index f4ad99c..0e0279e 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -237,6 +237,6 @@ MACHINE_START(AML_M5900, "AML_M5900")
 	.map_io		= amlm5900_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= amlm5900_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 1ee8c46..bb595f1 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -28,17 +28,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/anubis-map.h>
-#include <mach/anubis-irq.h>
-#include <mach/anubis-cpld.h>
-
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
@@ -55,8 +50,9 @@
 #include <plat/cpu.h>
 #include <linux/platform_data/asoc-s3c24xx_simtec.h>
 
-#include "simtec.h"
+#include "anubis.h"
 #include "common.h"
+#include "simtec.h"
 
 #define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
 
@@ -237,7 +233,7 @@ static struct pata_platform_info anubis_ide_platdata = {
 static struct resource anubis_ide0_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C2410_CS3, 8 * 32),
 	[2] = DEFINE_RES_MEM(S3C2410_CS3 + (1 << 26) + (6 * 32), 32),
-	[3] = DEFINE_RES_IRQ(IRQ_IDE0),
+	[3] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
 };
 
 static struct platform_device anubis_device_ide0 = {
@@ -254,7 +250,7 @@ static struct platform_device anubis_device_ide0 = {
 static struct resource anubis_ide1_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C2410_CS4, 8 * 32),
 	[1] = DEFINE_RES_MEM(S3C2410_CS4 + (1 << 26) + (6 * 32), 32),
-	[2] = DEFINE_RES_IRQ(IRQ_IDE0),
+	[2] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
 };
 
 static struct platform_device anubis_device_ide1 = {
@@ -279,7 +275,7 @@ static struct ax_plat_data anubis_asix_platdata = {
 
 static struct resource anubis_asix_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C2410_CS5, 0x20 * 0x20),
-	[1] = DEFINE_RES_IRQ(IRQ_ASIX),
+	[1] = DEFINE_RES_IRQ(ANUBIS_IRQ_ASIX),
 };
 
 static struct platform_device anubis_device_asix = {
@@ -448,6 +444,6 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
 	.map_io		= anubis_map_io,
 	.init_machine	= anubis_init,
 	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 00381fe..b4bc60c 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -14,6 +14,7 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
 #include <linux/timer.h>
@@ -34,7 +35,6 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
@@ -210,6 +210,6 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
 	.map_io		= at2440evb_map_io,
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index 6a30ce7..ca66180 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -24,48 +24,41 @@
 #include <linux/ata_platform.h>
 #include <linux/i2c.h>
 #include <linux/io.h>
+#include <linux/serial_8250.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 
 #include <net/ax88796.h>
 
+#include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
-
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
-#include <mach/bast-cpld.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
 #include <asm/mach-types.h>
 
-//#include <asm/debug-ll.h>
-#include <plat/regs-serial.h>
+#include <mach/fb.h>
+#include <mach/hardware.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 
-#include <linux/platform_data/hwmon-s3c.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/fb.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/serial_8250.h>
-
 #include <plat/clock.h>
-#include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
+#include <plat/devs.h>
 #include <plat/gpio-cfg.h>
-#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <plat/regs-serial.h>
 
-#include "simtec.h"
+#include "bast.h"
 #include "common.h"
+#include "simtec.h"
 
 #define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
 
@@ -312,7 +305,7 @@ static struct s3c2410_platform_nand __initdata bast_nand_info = {
 static struct resource bast_dm9k_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000, 4),
 	[1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000 + 0x40, 0x40),
-	[2] = DEFINE_RES_NAMED(IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \
+	[2] = DEFINE_RES_NAMED(BAST_IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \
 					| IORESOURCE_IRQ_HIGHLEVEL),
 };
 
@@ -343,7 +336,7 @@ static struct platform_device bast_device_dm9k = {
 static struct plat_serial8250_port bast_sio_data[] = {
 	[0] = {
 		.mapbase	= SERIAL_BASE + 0x2f8,
-		.irq		= IRQ_PCSERIAL1,
+		.irq		= BAST_IRQ_PCSERIAL1,
 		.flags		= SERIAL_FLAGS,
 		.iotype		= UPIO_MEM,
 		.regshift	= 0,
@@ -351,7 +344,7 @@ static struct plat_serial8250_port bast_sio_data[] = {
 	},
 	[1] = {
 		.mapbase	= SERIAL_BASE + 0x3f8,
-		.irq		= IRQ_PCSERIAL2,
+		.irq		= BAST_IRQ_PCSERIAL2,
 		.flags		= SERIAL_FLAGS,
 		.iotype		= UPIO_MEM,
 		.regshift	= 0,
@@ -390,7 +383,7 @@ static struct ax_plat_data bast_asix_platdata = {
 static struct resource bast_asix_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET, 0x18 * 0x20),
 	[1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), 1),
-	[2] = DEFINE_RES_IRQ(IRQ_ASIX),
+	[2] = DEFINE_RES_IRQ(BAST_IRQ_ASIX),
 };
 
 static struct platform_device bast_device_asix = {
@@ -612,6 +605,6 @@ MACHINE_START(BAST, "Simtec-BAST")
 	.map_io		= bast_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= bast_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 973b87c..a25e8c5 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/arm/mach-s3c2442/mach-gta02.c
- *
  * S3C2442 Machine Support for Openmoko GTA02 / FreeRunner.
  *
  * Copyright (C) 2006-2009 by Openmoko, Inc.
@@ -23,7 +21,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
- *
  */
 
 #include <linux/kernel.h>
@@ -34,62 +31,59 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/gpio_keys.h>
 #include <linux/workqueue.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/s3c24xx.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
 
 #include <linux/mmc/host.h>
 
+#include <linux/mfd/pcf50633/adc.h>
+#include <linux/mfd/pcf50633/backlight.h>
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/gpio.h>
+#include <linux/mfd/pcf50633/mbc.h>
+#include <linux/mfd/pcf50633/pmic.h>
+
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
-#include <linux/io.h>
 
-#include <linux/i2c.h>
 #include <linux/regulator/machine.h>
 
-#include <linux/mfd/pcf50633/core.h>
-#include <linux/mfd/pcf50633/mbc.h>
-#include <linux/mfd/pcf50633/adc.h>
-#include <linux/mfd/pcf50633/gpio.h>
-#include <linux/mfd/pcf50633/pmic.h>
-#include <linux/mfd/pcf50633/backlight.h>
-
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/s3c24xx.h>
 
+#include <asm/irq.h>
+#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/irq.h>
-#include <asm/mach-types.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
 #include <mach/fb.h>
-
-#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include <mach/regs-mem.h>
 #include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-irq.h>
 
-#include <mach/gta02.h>
-
-#include <plat/regs-serial.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/pm.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <plat/devs.h>
 #include <plat/gpio-cfg.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <plat/pm.h>
+#include <plat/regs-serial.h>
 
 #include "common.h"
+#include "gta02.h"
 
 static struct pcf50633 *gta02_pcf;
 
@@ -595,6 +589,6 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
 	.map_io		= gta02_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= gta02_machine_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index b23dd1b..79bc083 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-h1940.c
- *
+/*
  * Copyright (c) 2003-2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
@@ -37,40 +36,36 @@
 #include <linux/mmc/host.h>
 #include <linux/export.h>
 
+#include <asm/irq.h>
+#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-clock.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 
-#include <mach/regs-gpio.h>
-#include <mach/gpio-fns.h>
-#include <mach/gpio-nrs.h>
+#include <sound/uda1380.h>
 
-#include <mach/h1940.h>
-#include <mach/h1940-latch.h>
 #include <mach/fb.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/i2c-s3c2410.h>
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <plat/gpio-cfg.h>
 #include <plat/clock.h>
-#include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
 #include <plat/pll.h>
 #include <plat/pm.h>
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <plat/regs-serial.h>
 
-#include <sound/uda1380.h>
 
 #include "common.h"
+#include "h1940.h"
 
 #define H1940_LATCH		((void __force __iomem *)0xF8000000)
 
@@ -746,6 +741,6 @@ MACHINE_START(H1940, "IPAQ-H1940")
 	.reserve	= h1940_reserve,
 	.init_irq	= h1940_init_irq,
 	.init_machine	= h1940_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index c9954e2..54e83c1 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -35,9 +35,7 @@
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
-#include <mach/regs-power.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/fb.h>
 
@@ -56,6 +54,8 @@
 #include <plat/pm.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
 
+#include "s3c2412-power.h"
+
 static struct map_desc jive_iodesc[] __initdata = {
 };
 
@@ -661,6 +661,6 @@ MACHINE_START(JIVE, "JIVE")
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= jive_map_io,
 	.init_machine	= jive_machine_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index a31d5b8..2865e59 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -40,7 +40,6 @@
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <linux/platform_data/leds-s3c24xx.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/irqs.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
@@ -688,6 +687,6 @@ MACHINE_START(MINI2440, "MINI2440")
 	.map_io		= mini2440_map_io,
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index c53a9bf..d9d04b2 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -589,7 +589,7 @@ MACHINE_START(N30, "Acer-N30")
 				Ben Dooks <ben-linux@fluff.org>
 	*/
 	.atag_offset	= 0x100,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.init_machine	= n30_init,
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= n30_map_io,
@@ -600,7 +600,7 @@ MACHINE_START(N35, "Acer-N35")
 	/* Maintainer: Christer Weinigel <christer@weinigel.se>
 	*/
 	.atag_offset	= 0x100,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.init_machine	= n30_init,
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= n30_map_io,
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index a2b92b0..a454e24 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -153,6 +153,6 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	.map_io		= nexcoder_map_io,
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index c52100e..ae2cbdf 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2440/mach-osiris.c
- *
+/*
  * Copyright (c) 2005-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
@@ -26,22 +25,12 @@
 
 #include <linux/i2c/tps65010.h>
 
+#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
-
-#include <mach/osiris-map.h>
-#include <mach/osiris-cpld.h>
-
-#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/mach-types.h>
 
-#include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
@@ -50,12 +39,20 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
-#include <plat/gpio-cfg.h>
 #include <plat/clock.h>
-#include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/cpu-freq.h>
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-serial.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
 #include "common.h"
+#include "osiris.h"
+#include "regs-mem.h"
 
 /* onboard perihperal map */
 
@@ -429,6 +426,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	.map_io		= osiris_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= osiris_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
index bca39f0..40a47d6 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-otom.c
+/*
  *
  * Copyright (c) 2004 Nex Vision
  *   Guillaume GOURAT <guillaume.gourat@nexvision.fr>
@@ -6,7 +6,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
  */
 
 #include <linux/kernel.h>
@@ -19,26 +18,25 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/otom-map.h>
-
 #include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/s3c2410.h>
 #include <plat/clock.h>
-#include <plat/devs.h>
-#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/regs-serial.h>
+#include <plat/s3c2410.h>
 
 #include "common.h"
+#include "otom.h"
 
 static struct map_desc otom11_iodesc[] __initdata = {
   /* Device area */
@@ -118,6 +116,6 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
 	.map_io		= otom11_map_io,
 	.init_machine	= otom11_init,
 	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 7b6ba13..56175f0 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -343,6 +343,6 @@ MACHINE_START(QT2410, "QT2410")
 	.map_io		= qt2410_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= qt2410_machine_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 0606f2f..1f9ba2a 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2440/mach-rx1950.c
- *
+/*
  * Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
  * Copyright (c) 2007-2010 Vasily Khoruzhick
  *
@@ -37,31 +36,31 @@
 
 #include <linux/mmc/host.h>
 
+#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach-types.h>
 
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+
+#include <sound/uda1380.h>
+
+#include <mach/fb.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
-#include <mach/h1940.h>
-#include <mach/fb.h>
 
 #include <plat/clock.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-iic.h>
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/devs.h>
 #include <plat/pm.h>
-#include <plat/irq.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-
-#include <sound/uda1380.h>
+#include <plat/regs-iic.h>
+#include <plat/regs-serial.h>
 
 #include "common.h"
+#include "h1940.h"
 
 #define LCD_PWM_PERIOD 192960
 #define LCD_PWM_DUTY 127353
@@ -814,6 +813,6 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
 	.reserve	= rx1950_reserve,
 	.init_irq = s3c24xx_init_irq,
 	.init_machine = rx1950_init_machine,
-	.timer = &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index dacbb9a..f20418a 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -31,27 +31,27 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
 #include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
+#include <mach/fb.h>
+#include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
-#include <mach/h1940.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <mach/fb.h>
-
 #include <plat/clock.h>
-#include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/devs.h>
 #include <plat/pm.h>
+#include <plat/regs-serial.h>
 
 #include "common.h"
+#include "h1940.h"
 
 static struct map_desc rx3715_iodesc[] __initdata = {
 	/* dump ISA space somewhere unused */
@@ -212,6 +212,6 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
 	.reserve	= rx3715_reserve,
 	.init_irq	= rx3715_init_irq,
 	.init_machine	= rx3715_init_machine,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c
index 82796b9..e184bfa 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
@@ -117,6 +117,6 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
 	.map_io		= smdk2410_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= smdk2410_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index ce99fd8..86d7847 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -37,7 +37,6 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
-#include <mach/idle.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <mach/fb.h>
@@ -133,7 +132,7 @@ MACHINE_START(S3C2413, "S3C2413")
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2412_restart,
 MACHINE_END
 
@@ -145,7 +144,7 @@ MACHINE_START(SMDK2412, "SMDK2412")
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2412_restart,
 MACHINE_END
 
@@ -157,6 +156,6 @@ MACHINE_START(SMDK2413, "SMDK2413")
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index f30d7fc..ebb2e61 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -39,7 +39,6 @@
 #include <mach/regs-lcd.h>
 #include <mach/regs-s3c2443-clock.h>
 
-#include <mach/idle.h>
 #include <linux/platform_data/leds-s3c24xx.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
@@ -251,9 +250,9 @@ MACHINE_START(SMDK2416, "SMDK2416")
 	/* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
 	.atag_offset	= 0x100,
 
-	.init_irq	= s3c24xx_init_irq,
+	.init_irq	= s3c2416_init_irq,
 	.map_io		= smdk2416_map_io,
 	.init_machine	= smdk2416_machine_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2416_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index b7ff882..08cc38c 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -35,7 +35,6 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
-#include <mach/idle.h>
 #include <mach/fb.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
@@ -182,6 +181,6 @@ MACHINE_START(S3C2440, "SMDK2440")
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2440_map_io,
 	.init_machine	= smdk2440_machine_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index 2568656..fc65d74 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -35,7 +35,6 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
-#include <mach/idle.h>
 #include <mach/fb.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
@@ -141,9 +140,9 @@ MACHINE_START(SMDK2443, "SMDK2443")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.atag_offset	= 0x100,
 
-	.init_irq	= s3c24xx_init_irq,
+	.init_irq	= s3c2443_init_irq,
 	.map_io		= smdk2443_map_io,
 	.init_machine	= smdk2443_machine_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2443_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
index 495bf5c..24b3d79 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -149,6 +149,6 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
 	.map_io		= tct_hammer_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= tct_hammer_init,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 14d5b12..ec42d1e 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-vr1000.c
- *
+/*
  * Copyright (c) 2003-2008 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
@@ -32,27 +31,25 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/bast-map.h>
-#include <mach/vr1000-map.h>
-#include <mach/vr1000-irq.h>
-#include <mach/vr1000-cpld.h>
-
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
 #include <linux/platform_data/leds-s3c24xx.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
 
 #include <plat/clock.h>
-#include <plat/devs.h>
 #include <plat/cpu.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <plat/devs.h>
+#include <plat/regs-serial.h>
 
-#include "simtec.h"
+#include "bast.h"
 #include "common.h"
+#include "simtec.h"
+#include "vr1000.h"
 
 /* macros for virtual address mods for the io space entries */
 #define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
@@ -143,7 +140,7 @@ static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = {
 static struct plat_serial8250_port serial_platform_data[] = {
 	[0] = {
 		.mapbase	= VR1000_SERIAL_MAPBASE(0),
-		.irq		= IRQ_VR1000_SERIAL + 0,
+		.irq		= VR1000_IRQ_SERIAL + 0,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
 		.iotype		= UPIO_MEM,
 		.regshift	= 0,
@@ -151,7 +148,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 	},
 	[1] = {
 		.mapbase	= VR1000_SERIAL_MAPBASE(1),
-		.irq		= IRQ_VR1000_SERIAL + 1,
+		.irq		= VR1000_IRQ_SERIAL + 1,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
 		.iotype		= UPIO_MEM,
 		.regshift	= 0,
@@ -159,7 +156,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 	},
 	[2] = {
 		.mapbase	= VR1000_SERIAL_MAPBASE(2),
-		.irq		= IRQ_VR1000_SERIAL + 2,
+		.irq		= VR1000_IRQ_SERIAL + 2,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
 		.iotype		= UPIO_MEM,
 		.regshift	= 0,
@@ -167,7 +164,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 	},
 	[3] = {
 		.mapbase	= VR1000_SERIAL_MAPBASE(3),
-		.irq		= IRQ_VR1000_SERIAL + 3,
+		.irq		= VR1000_IRQ_SERIAL + 3,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
 		.iotype		= UPIO_MEM,
 		.regshift	= 0,
@@ -189,14 +186,14 @@ static struct platform_device serial_device = {
 static struct resource vr1000_dm9k0_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000, 4),
 	[1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x40, 0x40),
-	[2] = DEFINE_RES_NAMED(IRQ_VR1000_DM9000A, 1, NULL, IORESOURCE_IRQ \
+	[2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000A, 1, NULL, IORESOURCE_IRQ \
 						| IORESOURCE_IRQ_HIGHLEVEL),
 };
 
 static struct resource vr1000_dm9k1_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x80, 4),
 	[1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0, 0x40),
-	[2] = DEFINE_RES_NAMED(IRQ_VR1000_DM9000N, 1, NULL, IORESOURCE_IRQ \
+	[2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000N, 1, NULL, IORESOURCE_IRQ \
 						| IORESOURCE_IRQ_HIGHLEVEL),
 };
 
@@ -357,6 +354,6 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
 	.map_io		= vr1000_map_io,
 	.init_machine	= vr1000_init,
 	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index f1d44ae..3e2bfdd 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -36,7 +36,6 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
-#include <mach/idle.h>
 #include <mach/fb.h>
 
 #include <linux/platform_data/i2c-s3c2410.h>
@@ -161,6 +160,6 @@ MACHINE_START(VSTMS, "VSTMS")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= vstms_init,
 	.map_io		= vstms_map_io,
-	.timer		= &s3c24xx_timer,
+	.init_time	= s3c24xx_timer_init,
 	.restart	= s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/include/mach/osiris-map.h b/arch/arm/mach-s3c24xx/osiris.h
index 17380f8..b8d5607 100644
--- a/arch/arm/mach-s3c24xx/include/mach/osiris-map.h
+++ b/arch/arm/mach-s3c24xx/osiris.h
@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c2410/include/mach/osiris-map.h
- *
+/*
  * Copyright 2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/
  *	Ben Dooks <ben@simtec.co.uk>
  *
+ * OSIRIS - CPLD control constants
  * OSIRIS - Memory map definitions
  *
  * This program is free software; you can redistribute it and/or modify
@@ -11,10 +11,21 @@
  * published by the Free Software Foundation.
 */
 
-/* needs arch/map.h including with this */
+#ifndef __MACH_S3C24XX_OSIRIS_H
+#define __MACH_S3C24XX_OSIRIS_H __FILE__
+
+/* CTRL0 - NAND WP control */
+
+#define OSIRIS_CTRL0_NANDSEL		(0x3)
+#define OSIRIS_CTRL0_BOOT_INT		(1<<3)
+#define OSIRIS_CTRL0_PCMCIA		(1<<4)
+#define OSIRIS_CTRL0_FIX8		(1<<5)
+#define OSIRIS_CTRL0_PCMCIA_nWAIT	(1<<6)
+#define OSIRIS_CTRL0_PCMCIA_nIOIS16	(1<<7)
+
+#define OSIRIS_CTRL1_FIX8		(1<<0)
 
-#ifndef __ASM_ARCH_OSIRISMAP_H
-#define __ASM_ARCH_OSIRISMAP_H
+#define OSIRIS_ID_REVMASK		(0x7)
 
 /* start peripherals off after the S3C2410 */
 
@@ -39,4 +50,4 @@
 #define OSIRIS_VA_IDREG		OSIRIS_IOADDR(0x00700000)
 #define OSIRIS_PA_IDREG		(OSIRIS_PA_CPLD + (7<<23))
 
-#endif /* __ASM_ARCH_OSIRISMAP_H */
+#endif /* __MACH_S3C24XX_OSIRIS_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/otom-map.h b/arch/arm/mach-s3c24xx/otom.h
index f9277a5..321b7be 100644
--- a/arch/arm/mach-s3c24xx/include/mach/otom-map.h
+++ b/arch/arm/mach-s3c24xx/otom.h
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/otom-map.h
- *
+/*
  * (c) 2005 Guillaume GOURAT / NexVision
  *          guillaume.gourat@nexvision.fr
  *
@@ -10,21 +9,20 @@
  * published by the Free Software Foundation.
 */
 
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x01300000, now we need to find space for the
+/*
+ * ok, we've used up to 0x01300000, now we need to find space for the
  * peripherals that live in the nGCS[x] areas, which are quite numerous
  * in their space.
  */
 
-#ifndef __ASM_ARCH_OTOMMAP_H
-#define __ASM_ARCH_OTOMMAP_H
+#ifndef __MACH_S3C24XX_OTOM_H
+#define __MACH_S3C24XX_OTOM_H __FILE__
 
-#define OTOM_PA_CS8900A_BASE       (S3C2410_CS3 + 0x01000000)	/* nGCS3 +0x01000000 */
-#define OTOM_VA_CS8900A_BASE       S3C2410_ADDR(0x04000000)		/* 0xF4000000 */
+#define OTOM_PA_CS8900A_BASE	(S3C2410_CS3 + 0x01000000)	/* nGCS3 +0x01000000 */
+#define OTOM_VA_CS8900A_BASE	S3C2410_ADDR(0x04000000)	/* 0xF4000000 */
 
 /* physical offset addresses for the peripherals */
 
-#define OTOM_PA_FLASH0_BASE        (S3C2410_CS0)				/* Bank 0 */
+#define OTOM_PA_FLASH0_BASE	(S3C2410_CS0)
 
-#endif /* __ASM_ARCH_OTOMMAP_H */
+#endif /* __MACH_S3C24XX_OTOM_H */
diff --git a/arch/arm/mach-s3c24xx/pll-s3c2410.c b/arch/arm/mach-s3c24xx/pll-s3c2410.c
new file mode 100644
index 0000000..dcf3420
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/pll-s3c2410.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright (c) 2006-2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2410 CPU PLL tables
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table pll_vals_12MHz[] = {
+    { .frequency = 34000000,  .index = PLLVAL(82, 2, 3),   },
+    { .frequency = 45000000,  .index = PLLVAL(82, 1, 3),   },
+    { .frequency = 51000000,  .index = PLLVAL(161, 3, 3),  },
+    { .frequency = 48000000,  .index = PLLVAL(120, 2, 3),  },
+    { .frequency = 56000000,  .index = PLLVAL(142, 2, 3),  },
+    { .frequency = 68000000,  .index = PLLVAL(82, 2, 2),   },
+    { .frequency = 79000000,  .index = PLLVAL(71, 1, 2),   },
+    { .frequency = 85000000,  .index = PLLVAL(105, 2, 2),  },
+    { .frequency = 90000000,  .index = PLLVAL(112, 2, 2),  },
+    { .frequency = 101000000, .index = PLLVAL(127, 2, 2),  },
+    { .frequency = 113000000, .index = PLLVAL(105, 1, 2),  },
+    { .frequency = 118000000, .index = PLLVAL(150, 2, 2),  },
+    { .frequency = 124000000, .index = PLLVAL(116, 1, 2),  },
+    { .frequency = 135000000, .index = PLLVAL(82, 2, 1),   },
+    { .frequency = 147000000, .index = PLLVAL(90, 2, 1),   },
+    { .frequency = 152000000, .index = PLLVAL(68, 1, 1),   },
+    { .frequency = 158000000, .index = PLLVAL(71, 1, 1),   },
+    { .frequency = 170000000, .index = PLLVAL(77, 1, 1),   },
+    { .frequency = 180000000, .index = PLLVAL(82, 1, 1),   },
+    { .frequency = 186000000, .index = PLLVAL(85, 1, 1),   },
+    { .frequency = 192000000, .index = PLLVAL(88, 1, 1),   },
+    { .frequency = 203000000, .index = PLLVAL(161, 3, 1),  },
+
+    /* 2410A extras */
+
+    { .frequency = 210000000, .index = PLLVAL(132, 2, 1),  },
+    { .frequency = 226000000, .index = PLLVAL(105, 1, 1),  },
+    { .frequency = 266000000, .index = PLLVAL(125, 1, 1),  },
+    { .frequency = 268000000, .index = PLLVAL(126, 1, 1),  },
+    { .frequency = 270000000, .index = PLLVAL(127, 1, 1),  },
+};
+
+static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif)
+{
+	return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
+}
+
+static struct subsys_interface s3c2410_plls_interface = {
+	.name		= "s3c2410_plls",
+	.subsys		= &s3c2410_subsys,
+	.add_dev	= s3c2410_plls_add,
+};
+
+static int __init s3c2410_pll_init(void)
+{
+	return subsys_interface_register(&s3c2410_plls_interface);
+
+}
+arch_initcall(s3c2410_pll_init);
+
+static struct subsys_interface s3c2410a_plls_interface = {
+	.name		= "s3c2410a_plls",
+	.subsys		= &s3c2410a_subsys,
+	.add_dev	= s3c2410_plls_add,
+};
+
+static int __init s3c2410a_pll_init(void)
+{
+	return subsys_interface_register(&s3c2410a_plls_interface);
+}
+arch_initcall(s3c2410a_pll_init);
diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
new file mode 100644
index 0000000..6737817
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright (c) 2006-2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (12MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
+	{ .frequency = 75000000,	.index = PLLVAL(0x75, 3, 3),  }, 	/* FVco 600.000000 */
+	{ .frequency = 80000000,	.index = PLLVAL(0x98, 4, 3),  }, 	/* FVco 640.000000 */
+	{ .frequency = 90000000,	.index = PLLVAL(0x70, 2, 3),  }, 	/* FVco 720.000000 */
+	{ .frequency = 100000000,	.index = PLLVAL(0x5c, 1, 3),  }, 	/* FVco 800.000000 */
+	{ .frequency = 110000000,	.index = PLLVAL(0x66, 1, 3),  }, 	/* FVco 880.000000 */
+	{ .frequency = 120000000,	.index = PLLVAL(0x70, 1, 3),  }, 	/* FVco 960.000000 */
+	{ .frequency = 150000000,	.index = PLLVAL(0x75, 3, 2),  }, 	/* FVco 600.000000 */
+	{ .frequency = 160000000,	.index = PLLVAL(0x98, 4, 2),  }, 	/* FVco 640.000000 */
+	{ .frequency = 170000000,	.index = PLLVAL(0x4d, 1, 2),  }, 	/* FVco 680.000000 */
+	{ .frequency = 180000000,	.index = PLLVAL(0x70, 2, 2),  }, 	/* FVco 720.000000 */
+	{ .frequency = 190000000,	.index = PLLVAL(0x57, 1, 2),  }, 	/* FVco 760.000000 */
+	{ .frequency = 200000000,	.index = PLLVAL(0x5c, 1, 2),  }, 	/* FVco 800.000000 */
+	{ .frequency = 210000000,	.index = PLLVAL(0x84, 2, 2),  }, 	/* FVco 840.000000 */
+	{ .frequency = 220000000,	.index = PLLVAL(0x66, 1, 2),  }, 	/* FVco 880.000000 */
+	{ .frequency = 230000000,	.index = PLLVAL(0x6b, 1, 2),  }, 	/* FVco 920.000000 */
+	{ .frequency = 240000000,	.index = PLLVAL(0x70, 1, 2),  }, 	/* FVco 960.000000 */
+	{ .frequency = 300000000,	.index = PLLVAL(0x75, 3, 1),  }, 	/* FVco 600.000000 */
+	{ .frequency = 310000000,	.index = PLLVAL(0x93, 4, 1),  }, 	/* FVco 620.000000 */
+	{ .frequency = 320000000,	.index = PLLVAL(0x98, 4, 1),  }, 	/* FVco 640.000000 */
+	{ .frequency = 330000000,	.index = PLLVAL(0x66, 2, 1),  }, 	/* FVco 660.000000 */
+	{ .frequency = 340000000,	.index = PLLVAL(0x4d, 1, 1),  }, 	/* FVco 680.000000 */
+	{ .frequency = 350000000,	.index = PLLVAL(0xa7, 4, 1),  }, 	/* FVco 700.000000 */
+	{ .frequency = 360000000,	.index = PLLVAL(0x70, 2, 1),  }, 	/* FVco 720.000000 */
+	{ .frequency = 370000000,	.index = PLLVAL(0xb1, 4, 1),  }, 	/* FVco 740.000000 */
+	{ .frequency = 380000000,	.index = PLLVAL(0x57, 1, 1),  }, 	/* FVco 760.000000 */
+	{ .frequency = 390000000,	.index = PLLVAL(0x7a, 2, 1),  }, 	/* FVco 780.000000 */
+	{ .frequency = 400000000,	.index = PLLVAL(0x5c, 1, 1),  }, 	/* FVco 800.000000 */
+};
+
+static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+
+	xtal_clk = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal_clk))
+		return PTR_ERR(xtal_clk);
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	if (xtal == 12000000) {
+		printk(KERN_INFO "Using PLL table for 12MHz crystal\n");
+		return s3c_plltab_register(s3c2440_plls_12,
+					   ARRAY_SIZE(s3c2440_plls_12));
+	}
+
+	return 0;
+}
+
+static struct subsys_interface s3c2440_plls12_interface = {
+	.name		= "s3c2440_plls12",
+	.subsys		= &s3c2440_subsys,
+	.add_dev	= s3c2440_plls12_add,
+};
+
+static int __init s3c2440_pll_12mhz(void)
+{
+	return subsys_interface_register(&s3c2440_plls12_interface);
+
+}
+arch_initcall(s3c2440_pll_12mhz);
+
+static struct subsys_interface s3c2442_plls12_interface = {
+	.name		= "s3c2442_plls12",
+	.subsys		= &s3c2442_subsys,
+	.add_dev	= s3c2440_plls12_add,
+};
+
+static int __init s3c2442_pll_12mhz(void)
+{
+	return subsys_interface_register(&s3c2442_plls12_interface);
+
+}
+arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
new file mode 100644
index 0000000..debfa10
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
@@ -0,0 +1,125 @@
+/*
+ * Copyright (c) 2006-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
+	{ .frequency = 78019200,	.index = PLLVAL(121, 5, 3), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 84067200,	.index = PLLVAL(131, 5, 3), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 90115200,	.index = PLLVAL(141, 5, 3), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 96163200,	.index = PLLVAL(151, 5, 3), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 102135600,	.index = PLLVAL(185, 6, 3), 	}, 	/* FVco 817.084800 */
+	{ .frequency = 108259200,	.index = PLLVAL(171, 5, 3), 	}, 	/* FVco 866.073600 */
+	{ .frequency = 114307200,	.index = PLLVAL(127, 3, 3), 	}, 	/* FVco 914.457600 */
+	{ .frequency = 120234240,	.index = PLLVAL(134, 3, 3), 	}, 	/* FVco 961.873920 */
+	{ .frequency = 126161280,	.index = PLLVAL(141, 3, 3), 	}, 	/* FVco 1009.290240 */
+	{ .frequency = 132088320,	.index = PLLVAL(148, 3, 3), 	}, 	/* FVco 1056.706560 */
+	{ .frequency = 138015360,	.index = PLLVAL(155, 3, 3), 	}, 	/* FVco 1104.122880 */
+	{ .frequency = 144789120,	.index = PLLVAL(163, 3, 3), 	}, 	/* FVco 1158.312960 */
+	{ .frequency = 150100363,	.index = PLLVAL(187, 9, 2), 	}, 	/* FVco 600.401454 */
+	{ .frequency = 156038400,	.index = PLLVAL(121, 5, 2), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 162086400,	.index = PLLVAL(126, 5, 2), 	}, 	/* FVco 648.345600 */
+	{ .frequency = 168134400,	.index = PLLVAL(131, 5, 2), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 174048000,	.index = PLLVAL(177, 7, 2), 	}, 	/* FVco 696.192000 */
+	{ .frequency = 180230400,	.index = PLLVAL(141, 5, 2), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 186278400,	.index = PLLVAL(124, 4, 2), 	}, 	/* FVco 745.113600 */
+	{ .frequency = 192326400,	.index = PLLVAL(151, 5, 2), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 198132480,	.index = PLLVAL(109, 3, 2), 	}, 	/* FVco 792.529920 */
+	{ .frequency = 204271200,	.index = PLLVAL(185, 6, 2), 	}, 	/* FVco 817.084800 */
+	{ .frequency = 210268800,	.index = PLLVAL(141, 4, 2), 	}, 	/* FVco 841.075200 */
+	{ .frequency = 216518400,	.index = PLLVAL(171, 5, 2), 	}, 	/* FVco 866.073600 */
+	{ .frequency = 222264000,	.index = PLLVAL(97, 2, 2), 	}, 	/* FVco 889.056000 */
+	{ .frequency = 228614400,	.index = PLLVAL(127, 3, 2), 	}, 	/* FVco 914.457600 */
+	{ .frequency = 234259200,	.index = PLLVAL(158, 4, 2), 	}, 	/* FVco 937.036800 */
+	{ .frequency = 240468480,	.index = PLLVAL(134, 3, 2), 	}, 	/* FVco 961.873920 */
+	{ .frequency = 246960000,	.index = PLLVAL(167, 4, 2), 	}, 	/* FVco 987.840000 */
+	{ .frequency = 252322560,	.index = PLLVAL(141, 3, 2), 	}, 	/* FVco 1009.290240 */
+	{ .frequency = 258249600,	.index = PLLVAL(114, 2, 2), 	}, 	/* FVco 1032.998400 */
+	{ .frequency = 264176640,	.index = PLLVAL(148, 3, 2), 	}, 	/* FVco 1056.706560 */
+	{ .frequency = 270950400,	.index = PLLVAL(120, 2, 2), 	}, 	/* FVco 1083.801600 */
+	{ .frequency = 276030720,	.index = PLLVAL(155, 3, 2), 	}, 	/* FVco 1104.122880 */
+	{ .frequency = 282240000,	.index = PLLVAL(92, 1, 2), 	}, 	/* FVco 1128.960000 */
+	{ .frequency = 289578240,	.index = PLLVAL(163, 3, 2), 	}, 	/* FVco 1158.312960 */
+	{ .frequency = 294235200,	.index = PLLVAL(131, 2, 2), 	}, 	/* FVco 1176.940800 */
+	{ .frequency = 300200727,	.index = PLLVAL(187, 9, 1), 	}, 	/* FVco 600.401454 */
+	{ .frequency = 306358690,	.index = PLLVAL(191, 9, 1), 	}, 	/* FVco 612.717380 */
+	{ .frequency = 312076800,	.index = PLLVAL(121, 5, 1), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 318366720,	.index = PLLVAL(86, 3, 1), 	}, 	/* FVco 636.733440 */
+	{ .frequency = 324172800,	.index = PLLVAL(126, 5, 1), 	}, 	/* FVco 648.345600 */
+	{ .frequency = 330220800,	.index = PLLVAL(109, 4, 1), 	}, 	/* FVco 660.441600 */
+	{ .frequency = 336268800,	.index = PLLVAL(131, 5, 1), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 342074880,	.index = PLLVAL(93, 3, 1), 	}, 	/* FVco 684.149760 */
+	{ .frequency = 348096000,	.index = PLLVAL(177, 7, 1), 	}, 	/* FVco 696.192000 */
+	{ .frequency = 355622400,	.index = PLLVAL(118, 4, 1), 	}, 	/* FVco 711.244800 */
+	{ .frequency = 360460800,	.index = PLLVAL(141, 5, 1), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 366206400,	.index = PLLVAL(165, 6, 1), 	}, 	/* FVco 732.412800 */
+	{ .frequency = 372556800,	.index = PLLVAL(124, 4, 1), 	}, 	/* FVco 745.113600 */
+	{ .frequency = 378201600,	.index = PLLVAL(126, 4, 1), 	}, 	/* FVco 756.403200 */
+	{ .frequency = 384652800,	.index = PLLVAL(151, 5, 1), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 391608000,	.index = PLLVAL(177, 6, 1), 	}, 	/* FVco 783.216000 */
+	{ .frequency = 396264960,	.index = PLLVAL(109, 3, 1), 	}, 	/* FVco 792.529920 */
+	{ .frequency = 402192000,	.index = PLLVAL(87, 2, 1), 	}, 	/* FVco 804.384000 */
+};
+
+static int s3c2440_plls169344_add(struct device *dev,
+				  struct subsys_interface *sif)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+
+	xtal_clk = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal_clk))
+		return PTR_ERR(xtal_clk);
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	if (xtal == 169344000) {
+		printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n");
+		return s3c_plltab_register(s3c2440_plls_169344,
+					   ARRAY_SIZE(s3c2440_plls_169344));
+	}
+
+	return 0;
+}
+
+static struct subsys_interface s3c2440_plls169344_interface = {
+	.name		= "s3c2440_plls169344",
+	.subsys		= &s3c2440_subsys,
+	.add_dev	= s3c2440_plls169344_add,
+};
+
+static int __init s3c2440_pll_16934400(void)
+{
+	return subsys_interface_register(&s3c2440_plls169344_interface);
+}
+arch_initcall(s3c2440_pll_16934400);
+
+static struct subsys_interface s3c2442_plls169344_interface = {
+	.name		= "s3c2442_plls169344",
+	.subsys		= &s3c2442_subsys,
+	.add_dev	= s3c2440_plls169344_add,
+};
+
+static int __init s3c2442_pll_16934400(void)
+{
+	return subsys_interface_register(&s3c2442_plls169344_interface);
+}
+arch_initcall(s3c2442_pll_16934400);
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2410.c b/arch/arm/mach-s3c24xx/pm-s3c2410.c
index 949ae05..2d82c4f 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2410.c
@@ -29,16 +29,16 @@
 #include <linux/gpio.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
-
 #include <asm/mach-types.h>
 
+#include <mach/hardware.h>
 #include <mach/regs-gpio.h>
-#include <mach/h1940.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
 
+#include "h1940.h"
+
 static void s3c2410_pm_prepare(void)
 {
 	/* ensure at least GSTATUS3 has the resume address */
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c
index f5dc2b2..668a78a 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c
@@ -21,19 +21,19 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
 #include <asm/cacheflush.h>
 #include <asm/irq.h>
 
-#include <mach/regs-power.h>
+#include <mach/hardware.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
-
 #include <plat/s3c2412.h>
 
+#include "regs-dsc.h"
+#include "s3c2412-power.h"
+
 extern void s3c2412_sleep_enter(void);
 
 static int s3c2412_cpu_suspend(unsigned long arg)
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2416.c b/arch/arm/mach-s3c24xx/pm-s3c2416.c
index 1a9e8dd..4492389 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2416.c
@@ -16,12 +16,13 @@
 
 #include <asm/cacheflush.h>
 
-#include <mach/regs-power.h>
 #include <mach/regs-s3c2443-clock.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
 
+#include "s3c2412-power.h"
+
 extern void s3c2412_sleep_enter(void);
 
 static int s3c2416_cpu_suspend(unsigned long arg)
diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c
index 724755f..caa5b72 100644
--- a/arch/arm/mach-s3c24xx/pm.c
+++ b/arch/arm/mach-s3c24xx/pm.c
@@ -38,7 +38,6 @@
 #include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-irq.h>
 
 #include <asm/mach/time.h>
@@ -46,6 +45,8 @@
 #include <plat/gpio-cfg.h>
 #include <plat/pm.h>
 
+#include "regs-mem.h"
+
 #define PFX "s3c24xx-pm: "
 
 static struct sleep_save core_save[] = {
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-dsc.h b/arch/arm/mach-s3c24xx/regs-dsc.h
index 98fd4a0..98fd4a0 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-dsc.h
+++ b/arch/arm/mach-s3c24xx/regs-dsc.h
diff --git a/arch/arm/mach-s3c24xx/regs-mem.h b/arch/arm/mach-s3c24xx/regs-mem.h
new file mode 100644
index 0000000..86b1258
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/regs-mem.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Memory Control register definitions
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H
+#define __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H __FILE__
+
+#define S3C2410_MEMREG(x)		(S3C24XX_VA_MEMCTRL + (x))
+
+#define S3C2410_BWSCON			S3C2410_MEMREG(0x00)
+#define S3C2410_BANKCON0		S3C2410_MEMREG(0x04)
+#define S3C2410_BANKCON1		S3C2410_MEMREG(0x08)
+#define S3C2410_BANKCON2		S3C2410_MEMREG(0x0C)
+#define S3C2410_BANKCON3		S3C2410_MEMREG(0x10)
+#define S3C2410_BANKCON4		S3C2410_MEMREG(0x14)
+#define S3C2410_BANKCON5		S3C2410_MEMREG(0x18)
+#define S3C2410_BANKCON6		S3C2410_MEMREG(0x1C)
+#define S3C2410_BANKCON7		S3C2410_MEMREG(0x20)
+#define S3C2410_REFRESH			S3C2410_MEMREG(0x24)
+#define S3C2410_BANKSIZE		S3C2410_MEMREG(0x28)
+
+#define S3C2410_BWSCON_ST1		(1 << 7)
+#define S3C2410_BWSCON_ST2		(1 << 11)
+#define S3C2410_BWSCON_ST3		(1 << 15)
+#define S3C2410_BWSCON_ST4		(1 << 19)
+#define S3C2410_BWSCON_ST5		(1 << 23)
+
+#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
+
+#define S3C2410_BWSCON_WS		(1 << 2)
+
+#define S3C2410_BANKCON_PMC16		(0x3)
+
+#define S3C2410_BANKCON_Tacp_SHIFT	(2)
+#define S3C2410_BANKCON_Tcah_SHIFT	(4)
+#define S3C2410_BANKCON_Tcoh_SHIFT	(6)
+#define S3C2410_BANKCON_Tacc_SHIFT	(8)
+#define S3C2410_BANKCON_Tcos_SHIFT	(11)
+#define S3C2410_BANKCON_Tacs_SHIFT	(13)
+
+#define S3C2410_BANKCON_SDRAM		(0x3 << 15)
+
+#define S3C2410_REFRESH_SELF		(1 << 22)
+
+#define S3C2410_BANKSIZE_MASK		(0x7 << 0)
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H */
diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c
index a3c5cb0..9ebef95 100644
--- a/arch/arm/mach-s3c24xx/s3c2410.c
+++ b/arch/arm/mach-s3c24xx/s3c2410.c
@@ -49,6 +49,8 @@
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
 
+#include "common.h"
+
 /* Initial IO mappings */
 
 static struct map_desc s3c2410_iodesc[] __initdata = {
@@ -182,8 +184,8 @@ int __init s3c2410_init(void)
 
 #ifdef CONFIG_PM
 	register_syscore_ops(&s3c2410_pm_syscore_ops);
-#endif
 	register_syscore_ops(&s3c24xx_irq_syscore_ops);
+#endif
 
 	return device_register(&s3c2410_dev);
 }
diff --git a/arch/arm/mach-s3c24xx/s3c2412-power.h b/arch/arm/mach-s3c24xx/s3c2412-power.h
new file mode 100644
index 0000000..1b02c5d
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/s3c2412-power.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H
+#define __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H __FILE__
+
+#define S3C24XX_PWRREG(x)			((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2412_PWRMODECON			S3C24XX_PWRREG(0x20)
+#define S3C2412_PWRCFG				S3C24XX_PWRREG(0x24)
+
+#define S3C2412_INFORM0				S3C24XX_PWRREG(0x70)
+#define S3C2412_INFORM1				S3C24XX_PWRREG(0x74)
+#define S3C2412_INFORM2				S3C24XX_PWRREG(0x78)
+#define S3C2412_INFORM3				S3C24XX_PWRREG(0x7C)
+
+#define S3C2412_PWRCFG_BATF_IRQ			(1 << 0)
+#define S3C2412_PWRCFG_BATF_IGNORE		(2 << 0)
+#define S3C2412_PWRCFG_BATF_SLEEP		(3 << 0)
+#define S3C2412_PWRCFG_BATF_MASK		(3 << 0)
+
+#define S3C2412_PWRCFG_STANDBYWFI_IGNORE	(0 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_IDLE		(1 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_STOP		(2 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_SLEEP		(3 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_MASK		(3 << 6)
+
+#define S3C2412_PWRCFG_RTC_MASKIRQ		(1 << 8)
+#define S3C2412_PWRCFG_NAND_NORST		(1 << 9)
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H */
diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c
index 6c5f403..0d59215 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.c
+++ b/arch/arm/mach-s3c24xx/s3c2412.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2412/s3c2412.c
- *
+/*
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
@@ -28,28 +27,31 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/hardware.h>
 #include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/system_misc.h>
 
-#include <plat/cpu-freq.h>
-
+#include <mach/hardware.h>
 #include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-power.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
-#include <plat/regs-spi.h>
-#include <mach/regs-s3c2412.h>
 
-#include <plat/s3c2412.h>
+#include <plat/clock.h>
 #include <plat/cpu.h>
+#include <plat/cpu-freq.h>
 #include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/pm.h>
-#include <plat/pll.h>
 #include <plat/nand-core.h>
+#include <plat/pll.h>
+#include <plat/pm.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-spi.h>
+#include <plat/s3c2412.h>
+
+#include "common.h"
+#include "regs-dsc.h"
+#include "s3c2412-power.h"
+
+#define S3C2412_SWRST			(S3C24XX_VA_CLKPWR + 0x30)
+#define S3C2412_SWRST_RESET		(0x533C2412)
 
 #ifndef CONFIG_CPU_S3C2412_ONLY
 void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
@@ -244,8 +246,8 @@ int __init s3c2412_init(void)
 
 #ifdef CONFIG_PM
 	register_syscore_ops(&s3c2412_pm_syscore_ops);
-#endif
 	register_syscore_ops(&s3c24xx_irq_syscore_ops);
+#endif
 
 	return device_register(&s3c2412_dev);
 }
diff --git a/arch/arm/mach-s3c24xx/s3c2412.h b/arch/arm/mach-s3c24xx/s3c2412.h
new file mode 100644
index 0000000..548ced4
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/s3c2412.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_H
+#define __ARCH_ARM_REGS_S3C24XX_S3C2412_H __FILE__
+
+#define S3C2412_MEMREG(x)		(S3C24XX_VA_MEMCTRL + (x))
+#define S3C2412_EBIREG(x)		(S3C2412_VA_EBI + (x))
+
+#define S3C2412_SSMCREG(x)		(S3C2412_VA_SSMC + (x))
+#define S3C2412_SSMC(x, o)		(S3C2412_SSMCREG((x * 0x20) + (o)))
+
+#define S3C2412_REFRESH			S3C2412_MEMREG(0x10)
+
+#define S3C2412_EBI_BANKCFG		S3C2412_EBIREG(0x4)
+
+#define S3C2412_SSMC_BANK(x)		S3C2412_SSMC(x, 0x0)
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_H */
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c
index 77ee0b7..e30476d 100644
--- a/arch/arm/mach-s3c24xx/s3c2416.c
+++ b/arch/arm/mach-s3c24xx/s3c2416.c
@@ -63,6 +63,8 @@
 #include <plat/rtc-core.h>
 #include <plat/spi-core.h>
 
+#include "common.h"
+
 static struct map_desc s3c2416_iodesc[] __initdata = {
 	IODESC_ENT(WATCHDOG),
 	IODESC_ENT(CLKPWR),
@@ -105,9 +107,9 @@ int __init s3c2416_init(void)
 
 #ifdef CONFIG_PM
 	register_syscore_ops(&s3c2416_pm_syscore_ops);
-#endif
 	register_syscore_ops(&s3c24xx_irq_syscore_ops);
 	register_syscore_ops(&s3c2416_irq_syscore_ops);
+#endif
 
 	return device_register(&s3c2416_dev);
 }
diff --git a/arch/arm/mach-s3c24xx/s3c2440.c b/arch/arm/mach-s3c24xx/s3c2440.c
index 2b3dddb..559e394 100644
--- a/arch/arm/mach-s3c24xx/s3c2440.c
+++ b/arch/arm/mach-s3c24xx/s3c2440.c
@@ -40,6 +40,8 @@
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
 
+#include "common.h"
+
 static struct device s3c2440_dev = {
 	.bus		= &s3c2440_subsys,
 };
@@ -57,9 +59,9 @@ int __init s3c2440_init(void)
 
 #ifdef CONFIG_PM
 	register_syscore_ops(&s3c2410_pm_syscore_ops);
+	register_syscore_ops(&s3c24xx_irq_syscore_ops);
 #endif
 	register_syscore_ops(&s3c244x_pm_syscore_ops);
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
 
 	/* register our system device for everything else */
 
diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c
index 22cb7c9..f732826 100644
--- a/arch/arm/mach-s3c24xx/s3c2442.c
+++ b/arch/arm/mach-s3c24xx/s3c2442.c
@@ -51,6 +51,8 @@
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
 
+#include "common.h"
+
 /* S3C2442 extended clock support */
 
 static unsigned long s3c2442_camif_upll_round(struct clk *clk,
@@ -172,9 +174,9 @@ int __init s3c2442_init(void)
 
 #ifdef CONFIG_PM
 	register_syscore_ops(&s3c2410_pm_syscore_ops);
+	register_syscore_ops(&s3c24xx_irq_syscore_ops);
 #endif
 	register_syscore_ops(&s3c244x_pm_syscore_ops);
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
 
 	return device_register(&s3c2442_dev);
 }
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c
index b0b60a1..ad2671b 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c24xx/s3c244x.c
@@ -36,7 +36,6 @@
 #include <mach/regs-clock.h>
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c244x.h>
@@ -48,6 +47,8 @@
 #include <plat/nand-core.h>
 #include <plat/watchdog-reset.h>
 
+#include "regs-dsc.h"
+
 static struct map_desc s3c244x_iodesc[] __initdata = {
 	IODESC_ENT(CLKPWR),
 	IODESC_ENT(TIMER),
diff --git a/arch/arm/mach-s3c24xx/simtec-audio.c b/arch/arm/mach-s3c24xx/simtec-audio.c
index fd0ef05..67cb512 100644
--- a/arch/arm/mach-s3c24xx/simtec-audio.c
+++ b/arch/arm/mach-s3c24xx/simtec-audio.c
@@ -17,16 +17,13 @@
 #include <linux/device.h>
 #include <linux/io.h>
 
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
-#include <mach/bast-cpld.h>
-
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 
 #include <linux/platform_data/asoc-s3c24xx_simtec.h>
 #include <plat/devs.h>
 
+#include "bast.h"
 #include "simtec.h"
 
 /* platform ops for audio */
diff --git a/arch/arm/mach-s3c24xx/simtec-nor.c b/arch/arm/mach-s3c24xx/simtec-nor.c
index 029744fc..8884bff 100644
--- a/arch/arm/mach-s3c24xx/simtec-nor.c
+++ b/arch/arm/mach-s3c24xx/simtec-nor.c
@@ -27,9 +27,8 @@
 #include <asm/mach/irq.h>
 
 #include <mach/map.h>
-#include <mach/bast-map.h>
-#include <mach/bast-cpld.h>
 
+#include "bast.h"
 #include "simtec.h"
 
 static void simtec_nor_vpp(struct platform_device *pdev, int vpp)
diff --git a/arch/arm/mach-s3c24xx/simtec-pm.c b/arch/arm/mach-s3c24xx/simtec-pm.c
index 699f931..38a2f1f 100644
--- a/arch/arm/mach-s3c24xx/simtec-pm.c
+++ b/arch/arm/mach-s3c24xx/simtec-pm.c
@@ -28,12 +28,13 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 
 #include <asm/mach-types.h>
 
 #include <plat/pm.h>
 
+#include "regs-mem.h"
+
 #define COPYRIGHT ", Copyright 2005 Simtec Electronics"
 
 /* pm_simtec_init
diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c24xx/simtec-usb.c
index ddf7a3c..2ed2e32 100644
--- a/arch/arm/mach-s3c24xx/simtec-usb.c
+++ b/arch/arm/mach-s3c24xx/simtec-usb.c
@@ -28,15 +28,13 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
-
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/devs.h>
 
+#include "bast.h"
 #include "simtec.h"
 
 /* control power and monitor over-current events on various Simtec
@@ -79,7 +77,7 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)
 	int ret;
 
 	if (on) {
-		ret = request_irq(IRQ_USBOC, usb_simtec_ocirq,
+		ret = request_irq(BAST_IRQ_USBOC, usb_simtec_ocirq,
 				  IRQF_DISABLED | IRQF_TRIGGER_RISING |
 				   IRQF_TRIGGER_FALLING,
 				  "USB Over-current", info);
@@ -87,7 +85,7 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)
 			printk(KERN_ERR "failed to request usb oc irq\n");
 		}
 	} else {
-		free_irq(IRQ_USBOC, info);
+		free_irq(BAST_IRQ_USBOC, info);
 	}
 }
 
diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2410.S b/arch/arm/mach-s3c24xx/sleep-s3c2410.S
index 65200ae..dd47c8f 100644
--- a/arch/arm/mach-s3c24xx/sleep-s3c2410.S
+++ b/arch/arm/mach-s3c24xx/sleep-s3c2410.S
@@ -31,9 +31,10 @@
 
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
-#include <mach/regs-mem.h>
 #include <plat/regs-serial.h>
 
+#include "regs-mem.h"
+
 	/* s3c2410_cpu_suspend
 	 *
 	 * put the cpu into sleep mode
diff --git a/arch/arm/mach-s3c24xx/sleep.S b/arch/arm/mach-s3c24xx/sleep.S
index c5661256..7f378b6 100644
--- a/arch/arm/mach-s3c24xx/sleep.S
+++ b/arch/arm/mach-s3c24xx/sleep.S
@@ -31,7 +31,6 @@
 
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
-#include <mach/regs-mem.h>
 #include <plat/regs-serial.h>
 
 /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
diff --git a/arch/arm/mach-s3c24xx/vr1000.h b/arch/arm/mach-s3c24xx/vr1000.h
new file mode 100644
index 0000000..7fcd2c2f
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/vr1000.h
@@ -0,0 +1,118 @@
+
+/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * VR1000 - CPLD control constants
+ * Machine VR1000 - IRQ Number definitions
+ * Machine VR1000 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C24XX_VR1000_H
+#define __MACH_S3C24XX_VR1000_H __FILE__
+
+#define VR1000_CPLD_CTRL2_RAMWEN	(0x04)	/* SRAM Write Enable */
+
+/* irq numbers to onboard peripherals */
+
+#define VR1000_IRQ_USBOC		IRQ_EINT19
+#define VR1000_IRQ_IDE0			IRQ_EINT16
+#define VR1000_IRQ_IDE1			IRQ_EINT17
+#define VR1000_IRQ_SERIAL		IRQ_EINT12
+#define VR1000_IRQ_DM9000A		IRQ_EINT10
+#define VR1000_IRQ_DM9000N		IRQ_EINT9
+#define VR1000_IRQ_SMALERT		IRQ_EINT8
+
+/* map */
+
+#define VR1000_IOADDR(x)		(S3C2410_ADDR((x) + 0x01300000))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define VR1000_VA_CTRL1			VR1000_IOADDR(0x00000000) /* 0x01300000 */
+#define VR1000_PA_CTRL1			(S3C2410_CS5 | 0x7800000)
+
+#define VR1000_VA_CTRL2			VR1000_IOADDR(0x00100000) /* 0x01400000 */
+#define VR1000_PA_CTRL2			(S3C2410_CS1 | 0x6000000)
+
+#define VR1000_VA_CTRL3			VR1000_IOADDR(0x00200000) /* 0x01500000 */
+#define VR1000_PA_CTRL3			(S3C2410_CS1 | 0x6800000)
+
+#define VR1000_VA_CTRL4			VR1000_IOADDR(0x00300000) /* 0x01600000 */
+#define VR1000_PA_CTRL4			(S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define VR1000_PA_PC104_IRQREQ		(S3C2410_CS5 | 0x6000000) /* 0x01700000 */
+#define VR1000_VA_PC104_IRQREQ		VR1000_IOADDR(0x00400000)
+
+#define VR1000_PA_PC104_IRQRAW		(S3C2410_CS5 | 0x6800000) /* 0x01800000 */
+#define VR1000_VA_PC104_IRQRAW		VR1000_IOADDR(0x00500000)
+
+#define VR1000_PA_PC104_IRQMASK		(S3C2410_CS5 | 0x7000000) /* 0x01900000 */
+#define VR1000_VA_PC104_IRQMASK		VR1000_IOADDR(0x00600000)
+
+/*
+ * 0xE0000000 contains the IO space that is split by speed and
+ * whether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000  8bit,  slow
+ * 0x04000000 to 0x08000000  16bit, slow
+ * 0x08000000 to 0x0C000000  16bit, net
+ * 0x0C000000 to 0x10000000  16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x02000000 to 0x02100000 1MB  IDE primary channel
+ * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB  IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
+ * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controllers
+ * 0x02600000 to 0x02700000 1MB
+ *
+ * the phyiscal layout of the zones are:
+ *  nGCS2 - 8bit, slow
+ *  nGCS3 - 16bit, slow
+ *  nGCS4 - 16bit, net
+ *  nGCS5 - 16bit, fast
+ */
+
+#define VR1000_VA_MULTISPACE	(0xE0000000)
+
+#define VR1000_VA_ISAIO		(VR1000_VA_MULTISPACE + 0x00000000)
+#define VR1000_VA_ISAMEM	(VR1000_VA_MULTISPACE + 0x01000000)
+#define VR1000_VA_IDEPRI	(VR1000_VA_MULTISPACE + 0x02000000)
+#define VR1000_VA_IDEPRIAUX	(VR1000_VA_MULTISPACE + 0x02100000)
+#define VR1000_VA_IDESEC	(VR1000_VA_MULTISPACE + 0x02200000)
+#define VR1000_VA_IDESECAUX	(VR1000_VA_MULTISPACE + 0x02300000)
+#define VR1000_VA_ASIXNET	(VR1000_VA_MULTISPACE + 0x02400000)
+#define VR1000_VA_DM9000	(VR1000_VA_MULTISPACE + 0x02500000)
+#define VR1000_VA_SUPERIO	(VR1000_VA_MULTISPACE + 0x02600000)
+
+/* physical offset addresses for the peripherals */
+
+#define VR1000_PA_IDEPRI	(0x02000000)
+#define VR1000_PA_IDEPRIAUX	(0x02800000)
+#define VR1000_PA_IDESEC	(0x03000000)
+#define VR1000_PA_IDESECAUX	(0x03800000)
+#define VR1000_PA_DM9000	(0x05000000)
+
+#define VR1000_PA_SERIAL	(0x11800000)
+#define VR1000_VA_SERIAL	(VR1000_IOADDR(0x00700000))
+
+/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
+#define VR1000_PA_SRAM		(S3C2410_CS1 | 0x05000000)
+
+/* some configurations for the peripherals */
+
+#define VR1000_DM9000_CS	VR1000_VAM_CS4
+
+#endif /* __MACH_S3C24XX_VR1000_H */