Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "This is a largeish batch of fixes, mostly because I missed -rc2 due to
  travel/vacation.  So in number these are a bit more than ideal unless
  you amortize them over two -rcs.

  Quick breakdown:
   - Defconfig updates
     - Making multi_v7_defconfig useful on more hardware to encourage
       single-image usage
     - Davinci and nomadik updates due to new code merged this merge
       window
   - Fixes for UART on Samsung platforms, both PM and clock-related
   - A handful of warning fixes from defconfig builds, including for
     max8925 backlight and pxamci (both with appropriate acks)
   - Exynos5440 fixes for LPAE configuration, PM
   - ...plus a bunch of other smaller changes all over the place

  I expect to switch to regressions-or-severe-bugs-only fixes from here
  on out"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
  mfd: max8925: fix dt code for backlight
  ARM: omap5: Only select errata 798181 if SMP
  ARM: EXYNOS: Update CONFIG_ARCH_NR_GPIO for Exynos
  ARM: EXYNOS: Fix low level debug support
  ARM: SAMSUNG: Save/restore only selected uart's registers
  ARM: SAMSUNG: Add SAMSUNG_PM config option to select pm
  ARM: S3C24XX: Add missing clkdev entries for s3c2440 UART
  ARM: multi_v7_defconfig: Select USB chipidea driver
  ARM: pxa: propagate errors from regulator_enable() to pxamci
  ARM: zynq: fix compilation warning
  ARM: keystone: fix compilation warning
  ARM: highbank: Only touch common coherency control register fields
  ARM: footbridge: fix overlapping PCI mappings
  dmaengine: shdma: fix a build failure on platforms with no DMA support
  ARM: STi: Set correct ARM ERRATAs.
  ARM: dts: STi: Fix pinconf setup for STiH416 serial2
  ARM: nomadik: configure for NO_HZ and HRTIMERS
  ARM: nomadik: update defconfig base
  ARM: nomadik: Update MMC defconfigs
  ARM: davinci: defconfig: enable EDMA driver
  ...

2 files changed, 101 insertions, 63 deletions

diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c
index 34fffdf..5645536 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c
@@ -119,66 +119,101 @@ static struct clk init_clocks_off[] = {
 	}
 };
 
-static struct clk init_clocks[] = {
-	{
-		.name		= "lcd",
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_LCDC,
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_USBD,
-	}, {
-		.name		= "timers",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_PWMT,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2410-uart.0",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2410-uart.1",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2410-uart.2",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_UART2,
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_p,
-		.ctrlbit	= 0,
-	}, {
-		.name		= "usb-bus-host",
-		.parent		= &clk_usb_bus,
-	}, {
-		.name		= "usb-bus-gadget",
-		.parent		= &clk_usb_bus,
-	},
+static struct clk clk_lcd = {
+	.name		= "lcd",
+	.parent		= &clk_h,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2410_CLKCON_LCDC,
+};
+
+static struct clk clk_gpio = {
+	.name		= "gpio",
+	.parent		= &clk_p,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2410_CLKCON_GPIO,
+};
+
+static struct clk clk_usb_host = {
+	.name		= "usb-host",
+	.parent		= &clk_h,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2410_CLKCON_USBH,
+};
+
+static struct clk clk_usb_device = {
+	.name		= "usb-device",
+	.parent		= &clk_h,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2410_CLKCON_USBD,
+};
+
+static struct clk clk_timers = {
+	.name		= "timers",
+	.parent		= &clk_p,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2410_CLKCON_PWMT,
+};
+
+struct clk s3c24xx_clk_uart0 = {
+	.name		= "uart",
+	.devname	= "s3c2410-uart.0",
+	.parent		= &clk_p,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2410_CLKCON_UART0,
+};
+
+struct clk s3c24xx_clk_uart1 = {
+	.name		= "uart",
+	.devname	= "s3c2410-uart.1",
+	.parent		= &clk_p,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2410_CLKCON_UART1,
+};
+
+struct clk s3c24xx_clk_uart2 = {
+	.name		= "uart",
+	.devname	= "s3c2410-uart.2",
+	.parent		= &clk_p,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2410_CLKCON_UART2,
+};
+
+static struct clk clk_rtc = {
+	.name		= "rtc",
+	.parent		= &clk_p,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2410_CLKCON_RTC,
+};
+
+static struct clk clk_watchdog = {
+	.name		= "watchdog",
+	.parent		= &clk_p,
+	.ctrlbit	= 0,
+};
+
+static struct clk clk_usb_bus_host = {
+	.name		= "usb-bus-host",
+	.parent		= &clk_usb_bus,
+};
+
+static struct clk clk_usb_bus_gadget = {
+	.name		= "usb-bus-gadget",
+	.parent		= &clk_usb_bus,
+};
+
+static struct clk *init_clocks[] = {
+	&clk_lcd,
+	&clk_gpio,
+	&clk_usb_host,
+	&clk_usb_device,
+	&clk_timers,
+	&s3c24xx_clk_uart0,
+	&s3c24xx_clk_uart1,
+	&s3c24xx_clk_uart2,
+	&clk_rtc,
+	&clk_watchdog,
+	&clk_usb_bus_host,
+	&clk_usb_bus_gadget,
 };
 
 /* s3c2410_baseclk_add()
@@ -195,7 +230,6 @@ int __init s3c2410_baseclk_add(void)
 {
 	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
 	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
-	struct clk *clkp;
 	struct clk *xtal;
 	int ret;
 	int ptr;
@@ -207,8 +241,9 @@ int __init s3c2410_baseclk_add(void)
 
 	/* register clocks from clock array */
 
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) {
+		struct clk *clkp = init_clocks[ptr];
+
 		/* ensure that we note the clock state */
 
 		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c
index 1069b56..aaf006d 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2440.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c
@@ -166,6 +166,9 @@ static struct clk_lookup s3c2440_clk_lookup[] = {
 	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
 	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
 	CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
+	CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0),
+	CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1),
+	CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2),
 	CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll),
 };