Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (172 commits)
  USB: Add support for SuperSpeed isoc endpoints
  xhci: Clean up cycle bit math used during stalls.
  xhci: Fix cycle bit calculation during stall handling.
  xhci: Update internal dequeue pointers after stalls.
  USB: Disable auto-suspend for USB 3.0 hubs.
  USB: Remove bogus USB_PORT_STAT_SUPER_SPEED symbol.
  xhci: Return canceled URBs immediately when host is halted.
  xhci: Fixes for suspend/resume of shared HCDs.
  xhci: Fix re-init on power loss after resume.
  xhci: Make roothub functions deal with device removal.
  xhci: Limit roothub ports to 15 USB3 & 31 USB2 ports.
  xhci: Return a USB 3.0 hub descriptor for USB3 roothub.
  xhci: Register second xHCI roothub.
  xhci: Change xhci_find_slot_id_by_port() API.
  xhci: Refactor bus suspend state into a struct.
  xhci: Index with a port array instead of PORTSC addresses.
  USB: Set usb_hcd->state and flags for shared roothubs.
  usb: Make core allocate resources per PCI-device.
  usb: Store bus type in usb_hcd, not in driver flags.
  usb: Change usb_hcd->bandwidth_mutex to a pointer.
  ...

1 files changed, 1 insertions, 23 deletions

diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index f62bb4c..d80f129 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -97,26 +97,8 @@ static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
 
 /* USB device UDC support */
 
-static void mini2440_udc_pullup(enum s3c2410_udc_cmd_e cmd)
-{
-	pr_debug("udc: pullup(%d)\n", cmd);
-
-	switch (cmd) {
-		case S3C2410_UDC_P_ENABLE :
-			gpio_set_value(S3C2410_GPC(5), 1);
-			break;
-		case S3C2410_UDC_P_DISABLE :
-			gpio_set_value(S3C2410_GPC(5), 0);
-			break;
-		case S3C2410_UDC_P_RESET :
-			break;
-		default:
-			break;
-	}
-}
-
 static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
-	.udc_command		= mini2440_udc_pullup,
+	.pullup_pin = S3C2410_GPC(5),
 };
 
 
@@ -644,10 +626,6 @@ static void __init mini2440_init(void)
 	s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
 	s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
 
-	/* Make sure the D+ pullup pin is output */
-	WARN_ON(gpio_request(S3C2410_GPC(5), "udc pup"));
-	gpio_direction_output(S3C2410_GPC(5), 0);
-
 	/* mark the key as input, without pullups (there is one on the board) */
 	for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
 		s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);