Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Merge the BIOS workarounds from 2.6.32, and the swiotlb fallback on failure.

5 files changed, 71 insertions, 20 deletions

diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
index 98f8e7e..34b80b7 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -73,4 +73,9 @@
 #define REALVIEW_PB1176_GIC_DIST_BASE		0x10041000 /* GIC distributor, on FPGA */
 #define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
 
+/*
+ * Control register SYS_RESETCTL is set to 1 to force a soft reset
+ */
+#define REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL    0x0100
+
 #endif	/* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h
index f0d68e0..7abf918 100644
--- a/arch/arm/mach-realview/include/mach/board-pb11mp.h
+++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h
@@ -81,4 +81,16 @@
 #define REALVIEW_TC11MP_GIC_DIST_BASE		0x1F001000	/* Test chip interrupt controller distributor */
 #define REALVIEW_TC11MP_L220_BASE		0x1F002000	/* L220 registers */
 
+ /*
+ * Values for REALVIEW_SYS_RESET_CTRL
+ */
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR    0x01
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGINIT   0x02
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_DLLRESET     0x03
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_PLLRESET     0x04
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_POR          0x05
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_DoC          0x06
+
+#define REALVIEW_PB11MP_SYS_CTRL_LED         (1 << 0)
+
 #endif	/* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
index 293c300..2417bbc 100644
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -29,4 +29,53 @@
 #define PHYS_OFFSET		UL(0x00000000)
 #endif
 
+#if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA)
+extern void realview_adjust_zones(int node, unsigned long *size,
+				  unsigned long *hole);
+#define arch_adjust_zones(node, size, hole) \
+	realview_adjust_zones(node, size, hole)
+
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_256M - 1)
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_256M)
+#endif
+
+#ifdef CONFIG_SPARSEMEM
+
+/*
+ * Sparsemem definitions for RealView PBX.
+ *
+ * The RealView PBX board has another block of 512MB of RAM at 0x20000000,
+ * however only the block at 0x70000000 (or the 256MB mirror at 0x00000000)
+ * may be used for DMA.
+ *
+ * The macros below define a section size of 256MB and a non-linear virtual to
+ * physical mapping:
+ *
+ * 256MB @ 0x00000000 -> PAGE_OFFSET
+ * 512MB @ 0x20000000 -> PAGE_OFFSET + 0x10000000
+ * 256MB @ 0x80000000 -> PAGE_OFFSET + 0x30000000
+ */
+#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
+#error "SPARSEMEM not available with REALVIEW_HIGH_PHYS_OFFSET"
+#endif
+
+#define MAX_PHYSMEM_BITS	32
+#define SECTION_SIZE_BITS	28
+
+/* bank page offsets */
+#define PAGE_OFFSET1	(PAGE_OFFSET + 0x10000000)
+#define PAGE_OFFSET2	(PAGE_OFFSET + 0x30000000)
+
+#define __phys_to_virt(phys)						\
+	((phys) >= 0x80000000 ?	(phys) - 0x80000000 + PAGE_OFFSET2 :	\
+	 (phys) >= 0x20000000 ?	(phys) - 0x20000000 + PAGE_OFFSET1 :	\
+	 (phys) + PAGE_OFFSET)
+
+#define __virt_to_phys(virt)						\
+	 ((virt) >= PAGE_OFFSET2 ? (virt) - PAGE_OFFSET2 + 0x80000000 :	\
+	  (virt) >= PAGE_OFFSET1 ? (virt) - PAGE_OFFSET1 + 0x20000000 :	\
+	  (virt) - PAGE_OFFSET)
+
+#endif	/* CONFIG_SPARSEMEM */
+
 #endif
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h
index c8f5083..4f46bf7 100644
--- a/arch/arm/mach-realview/include/mach/platform.h
+++ b/arch/arm/mach-realview/include/mach/platform.h
@@ -119,19 +119,6 @@
 #define REALVIEW_SYS_TEST_OSC3               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
 #define REALVIEW_SYS_TEST_OSC4               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
 
-/* 
- * Values for REALVIEW_SYS_RESET_CTRL
- */
-#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR    0x01
-#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT   0x02
-#define REALVIEW_SYS_CTRL_RESET_DLLRESET     0x03
-#define REALVIEW_SYS_CTRL_RESET_PLLRESET     0x04
-#define REALVIEW_SYS_CTRL_RESET_POR          0x05
-#define REALVIEW_SYS_CTRL_RESET_DoC          0x06
-
-#define REALVIEW_SYS_CTRL_LED         (1 << 0)
-
-
 /* ------------------------------------------------------------------------
  *  RealView control registers
  * ------------------------------------------------------------------------
@@ -153,7 +140,7 @@
  *     SYS_CLD, SYS_BOOTCS
  */
 #define REALVIEW_SYS_LOCK_LOCKED    (1 << 16)
-#define REALVIEW_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
+#define REALVIEW_SYS_LOCKVAL_MASK	0xA05F	       /* Enable write access */
 
 /*
  * REALVIEW_SYS_FLASH
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
index 1a15a44..a30f2e3 100644
--- a/arch/arm/mach-realview/include/mach/system.h
+++ b/arch/arm/mach-realview/include/mach/system.h
@@ -25,6 +25,8 @@
 #include <mach/hardware.h>
 #include <mach/platform.h>
 
+void (*realview_reset)(char mode);
+
 static inline void arch_idle(void)
 {
 	/*
@@ -36,16 +38,12 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET;
-	unsigned int val;
-
 	/*
 	 * To reset, we hit the on-board reset register
 	 * in the system FPGA
 	 */
-	val = __raw_readl(hdr_ctrl);
-	val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR;
-	__raw_writel(val, hdr_ctrl);
+	if (realview_reset)
+		realview_reset(mode);
 }
 
 #endif