Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

12 files changed, 334 insertions, 26 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 0104fd1..ea5137f 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -61,6 +61,7 @@ config MACH_POODLE
 	bool "Enable Sharp SL-5600 (Poodle) Support"
 	depends PXA_SHARPSL_25x
 	select SHARP_LOCOMO
+	select PXA_SSP
 
 config MACH_CORGI
 	bool "Enable Sharp SL-C700 (Corgi) Support"
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 4e8a983..1610690 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
 obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
 obj-$(CONFIG_MACH_AKITA)	+= akita-ioexp.o
-obj-$(CONFIG_MACH_POODLE)	+= poodle.o
+obj-$(CONFIG_MACH_POODLE)	+= poodle.o corgi_ssp.o
 obj-$(CONFIG_MACH_TOSA)         += tosa.o
 
 # Support for blinky lights
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index d6d7260..bf6648a 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -19,6 +19,7 @@
 #include <linux/fs.h>
 #include <linux/interrupt.h>
 #include <linux/mmc/host.h>
+#include <linux/pm.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -26,6 +27,7 @@
 #include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
+#include <asm/system.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -310,8 +312,31 @@ static struct platform_device *devices[] __initdata = {
 	&corgiled_device,
 };
 
+static void corgi_poweroff(void)
+{
+	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
+	if (!machine_is_corgi())
+		/* Green LED off tells the bootloader to halt */
+		reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
+	arm_machine_restart('h');
+}
+
+static void corgi_restart(char mode)
+{
+	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
+	if (!machine_is_corgi())
+		/* Green LED on tells the bootloader to reboot */
+		set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
+	arm_machine_restart('h');
+}
+
 static void __init corgi_init(void)
 {
+	pm_power_off = corgi_poweroff;
+	arm_pm_restart = corgi_restart;
+
 	/* setup sleep mode values */
 	PWER  = 0x00000002;
 	PFER  = 0x00000000;
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 7a1ab73..4c3de40 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -27,6 +27,13 @@
 #include <asm/arch/pxa-regs.h>
 #include "sharpsl.h"
 
+#define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
+#define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
+#define SHARPSL_CHARGE_ON_ACIN_HIGH    0x9b  /* 6V */
+#define SHARPSL_CHARGE_ON_ACIN_LOW     0x34  /* 2V */
+#define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */
+#define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */
+
 static void corgi_charger_init(void)
 {
 	pxa_gpio_mode(CORGI_GPIO_ADC_TEMP_ON | GPIO_OUT);
@@ -195,9 +202,16 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
 	.read_devdata    = corgipm_read_devdata,
 	.charger_wakeup  = corgi_charger_wakeup,
 	.should_wakeup   = corgi_should_wakeup,
-	.bat_levels      = 40,
-	.bat_levels_noac = spitz_battery_levels_noac,
-	.bat_levels_acin = spitz_battery_levels_acin,
+	.backlight_limit = corgibl_limit_intensity,
+	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
+	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
+	.charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
+	.charge_acin_low  = SHARPSL_CHARGE_ON_ACIN_LOW,
+	.fatal_acin_volt  = SHARPSL_FATAL_ACIN_VOLT,
+	.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
+	.bat_levels       = 40,
+	.bat_levels_noac  = spitz_battery_levels_noac,
+	.bat_levels_acin  = spitz_battery_levels_acin,
 	.status_high_acin = 188,
 	.status_low_acin  = 178,
 	.status_high_noac = 185,
@@ -214,6 +228,9 @@ static int __devinit corgipm_init(void)
 	if (!corgipm_device)
 		return -ENOMEM;
 
+	if (!machine_is_corgi())
+	    corgi_pm_machinfo.batfull_irq = 1;
+
 	corgipm_device->dev.platform_data = &corgi_pm_machinfo;
 	ret = platform_device_add(corgipm_device);
 
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index 8a25a1c..f942131 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -50,12 +50,14 @@ unsigned long corgi_ssp_ads7846_putget(ulong data)
 	unsigned long ret,flag;
 
 	spin_lock_irqsave(&corgi_ssp_lock, flag);
-	GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
+	if (ssp_machinfo->cs_ads7846 >= 0)
+		GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
 
 	ssp_write_word(&corgi_ssp_dev,data);
 	ret = ssp_read_word(&corgi_ssp_dev);
 
-	GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
+	if (ssp_machinfo->cs_ads7846 >= 0)
+		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
 	spin_unlock_irqrestore(&corgi_ssp_lock, flag);
 
 	return ret;
@@ -68,12 +70,14 @@ unsigned long corgi_ssp_ads7846_putget(ulong data)
 void corgi_ssp_ads7846_lock(void)
 {
 	spin_lock(&corgi_ssp_lock);
-	GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
+	if (ssp_machinfo->cs_ads7846 >= 0)
+		GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
 }
 
 void corgi_ssp_ads7846_unlock(void)
 {
-	GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
+	if (ssp_machinfo->cs_ads7846 >= 0)
+		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
 	spin_unlock(&corgi_ssp_lock);
 }
 
@@ -110,11 +114,13 @@ unsigned long corgi_ssp_dac_put(ulong data)
 	ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon));
 	ssp_enable(&corgi_ssp_dev);
 
-	GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
+	if (ssp_machinfo->cs_lcdcon >= 0)
+		GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
 	ssp_write_word(&corgi_ssp_dev,data);
 	/* Read null data back from device to prevent SSP overflow */
 	ssp_read_word(&corgi_ssp_dev);
-	GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
+	if (ssp_machinfo->cs_lcdcon >= 0)
+		GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
 
 	ssp_disable(&corgi_ssp_dev);
 	ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
@@ -147,7 +153,8 @@ int corgi_ssp_max1111_get(ulong data)
 	int voltage,voltage1,voltage2;
 
 	spin_lock_irqsave(&corgi_ssp_lock, flag);
-	GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
+	if (ssp_machinfo->cs_max1111 >= 0)
+		GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
 	ssp_disable(&corgi_ssp_dev);
 	ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111));
 	ssp_enable(&corgi_ssp_dev);
@@ -169,7 +176,8 @@ int corgi_ssp_max1111_get(ulong data)
 	ssp_disable(&corgi_ssp_dev);
 	ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
 	ssp_enable(&corgi_ssp_dev);
-	GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
+	if (ssp_machinfo->cs_max1111 >= 0)
+		GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
 	spin_unlock_irqrestore(&corgi_ssp_lock, flag);
 
 	if (voltage1 & 0xc0 || voltage2 & 0x3f)
@@ -196,9 +204,12 @@ static int __init corgi_ssp_probe(struct platform_device *dev)
 	int ret;
 
 	/* Chip Select - Disable All */
-	pxa_gpio_mode(ssp_machinfo->cs_lcdcon  | GPIO_OUT | GPIO_DFLT_HIGH);
-        pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH);
-        pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH);
+	if (ssp_machinfo->cs_lcdcon >= 0)
+		pxa_gpio_mode(ssp_machinfo->cs_lcdcon  | GPIO_OUT | GPIO_DFLT_HIGH);
+	if (ssp_machinfo->cs_max1111 >= 0)
+	        pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH);
+	if (ssp_machinfo->cs_ads7846 >= 0)
+        	pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH);
 
 	ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0);
 
@@ -229,9 +240,12 @@ static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state)
 
 static int corgi_ssp_resume(struct platform_device *dev)
 {
-	GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);  /* High - Disable LCD Control/Timing Gen */
-	GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
-	GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
+	if (ssp_machinfo->cs_lcdcon >= 0)
+		GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);  /* High - Disable LCD Control/Timing Gen */
+	if (ssp_machinfo->cs_max1111 >= 0)
+		GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
+	if (ssp_machinfo->cs_ads7846 >= 0)
+		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
 	ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
 	ssp_enable(&corgi_ssp_dev);
 
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 3e26d7c..1ab26c6 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -22,6 +22,10 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <asm/arch/pxa2xx_spi.h>
+
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
@@ -196,6 +200,78 @@ static struct resource smc91x_resources[] = {
 	},
 };
 
+/* ADS7846 is connected through SSP ... and if your board has J5 populated,
+ * you can select it to replace the ucb1400 by switching the touchscreen cable
+ * (to J5) and poking board registers (as done below).  Else it's only useful
+ * for the temperature sensors.
+ */
+static struct resource pxa_ssp_resources[] = {
+	[0] = {
+		.start	= __PREG(SSCR0_P(1)),
+		.end	= __PREG(SSCR0_P(1)) + 0x14,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_SSP,
+		.end	= IRQ_SSP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+	.ssp_type	= PXA25x_SSP,
+	.clock_enable	= CKEN3_SSP,
+	.num_chipselect	= 0,
+};
+
+static struct platform_device pxa_ssp = {
+	.name		= "pxa2xx-spi",
+	.id		= 1,
+	.resource	= pxa_ssp_resources,
+	.num_resources	= ARRAY_SIZE(pxa_ssp_resources),
+	.dev = {
+		.platform_data	= &pxa_ssp_master_info,
+	},
+};
+
+static int lubbock_ads7846_pendown_state(void)
+{
+	/* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
+	return 0;
+}
+
+static struct ads7846_platform_data ads_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,		/* internal, no cap */
+	.get_pendown_state	= lubbock_ads7846_pendown_state,
+	// .x_plate_ohms		= 500,	/* GUESS! */
+	// .y_plate_ohms		= 500,	/* GUESS! */
+};
+
+static void ads7846_cs(u32 command)
+{
+	static const unsigned	TS_nCS = 1 << 11;
+	lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS);
+}
+
+static struct pxa2xx_spi_chip ads_hw = {
+	.tx_threshold		= 1,
+	.rx_threshold		= 2,
+	.cs_control		= ads7846_cs,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = { {
+	.modalias	= "ads7846",
+	.platform_data	= &ads_info,
+	.controller_data = &ads_hw,
+	.irq		= LUBBOCK_BB_IRQ,
+	.max_speed_hz	= 120000 /* max sample rate at 3V */
+				* 26 /* command + data + overhead */,
+	.bus_num	= 1,
+	.chip_select	= 0,
+},
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= -1,
@@ -272,6 +348,7 @@ static struct platform_device *devices[] __initdata = {
 	&smc91x_device,
 	&lubbock_flash_device[0],
 	&lubbock_flash_device[1],
+	&pxa_ssp,
 };
 
 static struct pxafb_mach_info sharp_lm8v31 __initdata = {
@@ -400,6 +477,8 @@ static void __init lubbock_init(void)
 	lubbock_flash_data[flashboot^1].name = "application-flash";
 	lubbock_flash_data[flashboot].name = "boot-rom";
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 }
 
 static struct map_desc lubbock_io_desc[] __initdata = {
@@ -416,6 +495,11 @@ static void __init lubbock_map_io(void)
 	pxa_map_io();
 	iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
 
+	/* SSP data pins */
+	pxa_gpio_mode(GPIO23_SCLK_MD);
+	pxa_gpio_mode(GPIO25_STXD_MD);
+	pxa_gpio_mode(GPIO26_SRXD_MD);
+
 	/* This enables the BTUART */
 	pxa_gpio_mode(GPIO42_BTRXD_MD);
 	pxa_gpio_mode(GPIO43_BTTXD_MD);
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 02e188d..b307f11 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -493,6 +493,7 @@ static void __init mainstone_map_io(void)
 MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
 	/* Maintainer: MontaVista Software Inc. */
 	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0000100,	/* BLOB boot parameter setting */
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= mainstone_map_io,
 	.init_irq	= mainstone_init_irq,
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index a042473..9a9fa87 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -18,11 +18,14 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/fb.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
+#include <asm/system.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -34,12 +37,15 @@
 #include <asm/arch/irda.h>
 #include <asm/arch/poodle.h>
 #include <asm/arch/pxafb.h>
+#include <asm/arch/sharpsl.h>
+#include <asm/arch/ssp.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/hardware/locomo.h>
 #include <asm/mach/sharpsl_param.h>
 
 #include "generic.h"
+#include "sharpsl.h"
 
 static struct resource poodle_scoop_resources[] = {
 	[0] = {
@@ -117,13 +123,71 @@ static struct resource locomo_resources[] = {
 	},
 };
 
-static struct platform_device locomo_device = {
+struct platform_device poodle_locomo_device = {
 	.name		= "locomo",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(locomo_resources),
 	.resource	= locomo_resources,
 };
 
+EXPORT_SYMBOL(poodle_locomo_device);
+
+/*
+ * Poodle SSP Device
+ */
+
+struct platform_device poodle_ssp_device = {
+	.name		= "corgi-ssp",
+	.id		= -1,
+};
+
+struct corgissp_machinfo poodle_ssp_machinfo = {
+	.port		= 1,
+	.cs_lcdcon	= -1,
+	.cs_ads7846	= -1,
+	.cs_max1111	= -1,
+	.clk_lcdcon	= 2,
+	.clk_ads7846	= 36,
+	.clk_max1111	= 2,
+};
+
+
+/*
+ * Poodle Touch Screen Device
+ */
+static struct resource poodlets_resources[] = {
+	[0] = {
+		.start		= POODLE_IRQ_GPIO_TP_INT,
+		.end		= POODLE_IRQ_GPIO_TP_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static unsigned long poodle_get_hsync_len(void)
+{
+	return 0;
+}
+
+static void poodle_null_hsync(void)
+{
+}
+
+static struct corgits_machinfo  poodle_ts_machinfo = {
+	.get_hsync_len   = poodle_get_hsync_len,
+	.put_hsync       = poodle_null_hsync,
+	.wait_hsync      = poodle_null_hsync,
+};
+
+static struct platform_device poodle_ts_device = {
+	.name		= "corgi-ts",
+	.dev		= {
+		.platform_data	= &poodle_ts_machinfo,
+	},
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(poodlets_resources),
+	.resource	= poodlets_resources,
+};
+
 
 /*
  * MMC/SD Device
@@ -141,7 +205,9 @@ static int poodle_mci_init(struct device *dev, irqreturn_t (*poodle_detect_int)(
 	pxa_gpio_mode(GPIO6_MMCCLK_MD);
 	pxa_gpio_mode(GPIO8_MMCCS0_MD);
 	pxa_gpio_mode(POODLE_GPIO_nSD_DETECT | GPIO_IN);
+	pxa_gpio_mode(POODLE_GPIO_nSD_WP | GPIO_IN);
 	pxa_gpio_mode(POODLE_GPIO_SD_PWR | GPIO_OUT);
+	pxa_gpio_mode(POODLE_GPIO_SD_PWR1 | GPIO_OUT);
 
 	poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
@@ -160,12 +226,22 @@ static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
-	if (( 1 << vdd) & p_d->ocr_mask)
-		GPSR1 = GPIO_bit(POODLE_GPIO_SD_PWR);
-	else
-		GPCR1 = GPIO_bit(POODLE_GPIO_SD_PWR);
+	if (( 1 << vdd) & p_d->ocr_mask) {
+		GPSR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR);
+		mdelay(2);
+		GPSR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1);
+	} else {
+		GPCR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1);
+		GPCR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR);
+	}
+}
+
+static int poodle_mci_get_ro(struct device *dev)
+{
+	return GPLR(POODLE_GPIO_nSD_WP) & GPIO_bit(POODLE_GPIO_nSD_WP);
 }
 
+
 static void poodle_mci_exit(struct device *dev, void *data)
 {
 	free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data);
@@ -174,6 +250,7 @@ static void poodle_mci_exit(struct device *dev, void *data)
 static struct pxamci_platform_data poodle_mci_platform_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.init 		= poodle_mci_init,
+	.get_ro		= poodle_mci_get_ro,
 	.setpower 	= poodle_mci_setpower,
 	.exit		= poodle_mci_exit,
 };
@@ -243,14 +320,31 @@ static struct pxafb_mach_info poodle_fb_info __initdata = {
 };
 
 static struct platform_device *devices[] __initdata = {
-	&locomo_device,
+	&poodle_locomo_device,
 	&poodle_scoop_device,
+	&poodle_ssp_device,
+	&poodle_ts_device,
 };
 
+static void poodle_poweroff(void)
+{
+	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+	arm_machine_restart('h');
+}
+
+static void poodle_restart(char mode)
+{
+	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+	arm_machine_restart('h');
+}
+
 static void __init poodle_init(void)
 {
 	int ret = 0;
 
+	pm_power_off = poodle_poweroff;
+	arm_pm_restart = poodle_restart;
+
 	/* setup sleep mode values */
 	PWER  = 0x00000002;
 	PFER  = 0x00000000;
@@ -288,6 +382,7 @@ static void __init poodle_init(void)
   	GPSR1 = 0x00000000;
         GPSR2 = 0x00000000;
 
+	set_pxa_fb_parent(&poodle_locomo_device.dev);
 	set_pxa_fb_info(&poodle_fb_info);
 	pxa_gpio_mode(POODLE_GPIO_USB_PULLUP | GPIO_OUT);
 	pxa_gpio_mode(POODLE_GPIO_IR_ON | GPIO_OUT);
@@ -301,6 +396,7 @@ static void __init poodle_init(void)
 	if (ret) {
 		printk(KERN_WARNING "poodle: Unable to register LoCoMo device\n");
 	}
+	corgi_ssp_set_machinfo(&poodle_ssp_machinfo);
 }
 
 static void __init fixup_poodle(struct machine_desc *desc,
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 6d402b2..0f16487 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -128,6 +128,9 @@ struct battery_thresh  spitz_battery_levels_noac[] = {
  */
 int sharpsl_pm_pxa_read_max1111(int channel)
 {
+	if (machine_is_tosa()) // Ugly, better move this function into another module
+	    return 0;
+
 	return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
 			| MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
 }
@@ -156,7 +159,7 @@ void sharpsl_pm_pxa_init(void)
 		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING);
 	}
 
-	if (!machine_is_corgi())
+	if (sharpsl_pm.machinfo->batfull_irq)
 	{
 		/* Register interrupt handler. */
 		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, SA_INTERRUPT, "CO", sharpsl_chrg_full_isr)) {
@@ -174,6 +177,6 @@ void sharpsl_pm_pxa_remove(void)
 	if (sharpsl_pm.machinfo->gpio_fatal)
 		free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
 
-	if (!machine_is_corgi())
+	if (sharpsl_pm.machinfo->batfull_irq)
 		free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
 }
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 19b372d..eb9937f 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -20,6 +20,7 @@
 #include <linux/fs.h>
 #include <linux/interrupt.h>
 #include <linux/mmc/host.h>
+#include <linux/pm.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -27,6 +28,7 @@
 #include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
+#include <asm/system.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -371,6 +373,7 @@ static int spitz_ohci_init(struct device *dev)
 static struct pxaohci_platform_data spitz_ohci_platform_data = {
 	.port_mode	= PMM_NPS_MODE,
 	.init		= spitz_ohci_init,
+	.power_budget	= 150,
 };
 
 
@@ -431,8 +434,31 @@ static struct platform_device *devices[] __initdata = {
 	&spitzled_device,
 };
 
+static void spitz_poweroff(void)
+{
+	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
+	pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT);
+	GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET);
+
+	mdelay(1000);
+	arm_machine_restart('h');
+}
+
+static void spitz_restart(char mode)
+{
+	/* Bootloader magic for a reboot */
+	if((MSC0 & 0xffff0000) == 0x7ff00000)
+		MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
+
+	spitz_poweroff();
+}
+
 static void __init common_init(void)
 {
+	pm_power_off = spitz_poweroff;
+	arm_pm_restart = spitz_restart;
+
 	PMCR = 0x00;
 
 	/* setup sleep mode values */
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 5e5bdc8..40be833 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -27,6 +27,13 @@
 #include <asm/arch/pxa-regs.h>
 #include "sharpsl.h"
 
+#define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
+#define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
+#define SHARPSL_CHARGE_ON_ACIN_HIGH    0x9b  /* 6V */
+#define SHARPSL_CHARGE_ON_ACIN_LOW     0x34  /* 2V */
+#define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */
+#define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */
+
 static int spitz_last_ac_status;
 
 static void spitz_charger_init(void)
@@ -190,6 +197,7 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = {
 	.gpio_batlock     = SPITZ_GPIO_BAT_COVER,
 	.gpio_acin        = SPITZ_GPIO_AC_IN,
 	.gpio_batfull     = SPITZ_GPIO_CHRG_FULL,
+	.batfull_irq	  = 1,
 	.gpio_fatal       = SPITZ_GPIO_FATAL_BAT,
 	.discharge        = spitz_discharge,
 	.discharge1       = spitz_discharge1,
@@ -200,6 +208,13 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = {
 	.read_devdata     = spitzpm_read_devdata,
 	.charger_wakeup   = spitz_charger_wakeup,
 	.should_wakeup    = spitz_should_wakeup,
+        .backlight_limit  = corgibl_limit_intensity,
+	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
+	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
+	.charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
+	.charge_acin_low  = SHARPSL_CHARGE_ON_ACIN_LOW,
+	.fatal_acin_volt  = SHARPSL_FATAL_ACIN_VOLT,
+	.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
 	.bat_levels       = 40,
 	.bat_levels_noac  = spitz_battery_levels_noac,
 	.bat_levels_acin  = spitz_battery_levels_acin,
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 76c0e7f..7152bc1 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -19,12 +19,15 @@
 #include <linux/fs.h>
 #include <linux/interrupt.h>
 #include <linux/mmc/host.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
 #include <asm/hardware.h>
 #include <asm/irq.h>
+#include <asm/system.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
@@ -266,8 +269,31 @@ static struct platform_device *devices[] __initdata = {
 	&tosaled_device,
 };
 
+static void tosa_poweroff(void)
+{
+	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
+	pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT);
+	GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET);
+
+	mdelay(1000);
+	arm_machine_restart('h');
+}
+
+static void tosa_restart(char mode)
+{
+	/* Bootloader magic for a reboot */
+	if((MSC0 & 0xffff0000) == 0x7ff00000)
+		MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
+
+	tosa_poweroff();
+}
+
 static void __init tosa_init(void)
 {
+	pm_power_off = tosa_poweroff;
+	arm_pm_restart = tosa_restart;
+
 	pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN);
 	pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN);
 	pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN);