Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits)
  [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices
  [ARM] pxafb: cleanup of the timing checking code
  [ARM] pxafb: cleanup of the color format manipulation code
  [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3
  [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching
  [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset
  [ARM] pxafb: allow video memory size to be configurable
  [ARM] pxa: add document on the MFP design and how to use it
  [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad)
  [ARM] pxa: Update eseries defconfig
  [ARM] 5352/1: add w90p910-plat config file
  [ARM] s3c: S3C options should depend on PLAT_S3C
  [ARM] mv78xx0: implement GPIO and GPIO interrupt support
  [ARM] Kirkwood: implement GPIO and GPIO interrupt support
  [ARM] Orion: share GPIO IRQ handling code
  [ARM] Orion: share GPIO handling code
  [ARM] s3c: define __io using the typesafe version
  [ARM] S3C64XX: Ensure CPU_V6 is selected
  ...

71 files changed, 4055 insertions, 1133 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index a062235..8eea730 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -19,20 +19,34 @@ config CPU_PXA320
 config CPU_PXA930
 	bool "PXA930 (codename Tavor-P)"
 
+config CPU_PXA935
+	bool "PXA935 (codename Tavor-P65)"
+
 endmenu
 
 endif
 
 config ARCH_GUMSTIX
-	bool "Gumstix XScale boards"
+	bool "Gumstix XScale 255 boards"
+	select PXA25x
 	help
-	  Say Y here if you intend to run this kernel on a
-	  Gumstix Full Function Minature Computer.
+	  Say Y here if you intend to run this kernel on
+	  Basix, Connex, ws-200ax, ws-400ax systems
 
-config MACH_GUMSTIX_F
-	bool "Basix, Connex, ws-200ax, ws-400ax systems"
+choice
+	prompt "Gumstix Carrier/Expansion Board"
 	depends on ARCH_GUMSTIX
-	select PXA25x
+
+config GUMSTIX_AM200EPD
+	bool "Enable AM200EPD board support"
+
+endchoice
+
+config MACH_INTELMOTE2
+	bool "Intel Mote 2 Platform"
+	select PXA27x
+	select IWMMXT
+	select PXA_HAVE_BOARD_IRQS
 
 config ARCH_LUBBOCK
 	bool "Intel DBPXA250 Development Platform"
@@ -199,6 +213,10 @@ config MACH_E800
 config TRIZEPS_PXA
 	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
 
+config MACH_H5000
+	bool "HP iPAQ h5000"
+	select PXA25x
+
 config MACH_TRIZEPS4
 	bool "Keith und Koep Trizeps4 DIMM-Module"
 	depends on TRIZEPS_PXA
@@ -283,7 +301,6 @@ config MACH_MIOA701
 	bool "Mitac Mio A701 Support"
 	select PXA27x
 	select IWMMXT
-	select LEDS_GPIO
 	select HAVE_PWM
 	select GPIO_SYSFS
 	help
@@ -342,10 +359,6 @@ config PCM990_DISPLAY_NONE
 
 endchoice
 
-config MACH_AM200EPD
-	depends on MACH_GUMSTIX_F
-	bool "Enable AM200EPD board support"
-
 config PXA_EZX
 	bool "Motorola EZX Platform"
 	select PXA27x
@@ -386,16 +399,25 @@ endmenu
 
 config PXA25x
 	bool
+	select CPU_XSCALE
 	help
 	  Select code specific to PXA21x/25x/26x variants
 
 config PXA27x
 	bool
+	select CPU_XSCALE
 	help
 	  Select code specific to PXA27x variants
 
+config CPU_PXA26x
+	bool
+	select PXA25x
+	help
+	  Select code specific to PXA26x (codename Dalhart)
+
 config PXA3xx
 	bool
+	select CPU_XSC3
 	help
 	  Select code specific to PXA3xx variants
 
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index d64c68b..7b28bb5 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 
 # Specific board support
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
-obj-$(CONFIG_MACH_AM200EPD)	+= am200epd.o
+obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
 obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
 obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
@@ -35,6 +35,7 @@ obj-$(CONFIG_MACH_MP900C)	+= mp900.o
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
 obj-$(CONFIG_MACH_COLIBRI)	+= colibri.o
+obj-$(CONFIG_MACH_H5000)	+= h5000.o
 obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
 obj-$(CONFIG_CORGI_SSP_DEPRECATED)	+= corgi_ssp.o corgi_lcd.o
@@ -69,6 +70,8 @@ obj-$(CONFIG_MACH_ARMCORE)      += cm-x2xx.o cm-x255.o cm-x270.o
 obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
 obj-$(CONFIG_PXA_EZX)           += ezx.o
 
+obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
+
 # Support for blinky lights
 led-y := leds.o
 led-$(CONFIG_ARCH_LUBBOCK)	+= leds-lubbock.o
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index b965085..77ee80e 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -30,8 +30,12 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 
+#include <mach/gumstix.h>
+#include <mach/mfp-pxa25x.h>
 #include <mach/pxafb.h>
 
+#include "generic.h"
+
 #include <video/metronomefb.h>
 
 static unsigned int panel_type = 6;
@@ -331,7 +335,16 @@ static struct metronome_board am200_board = {
 	.cleanup		= am200_cleanup,
 };
 
-static int __init am200_init(void)
+static unsigned long am200_pin_config[] __initdata = {
+	GPIO51_GPIO,
+	GPIO49_GPIO,
+	GPIO48_GPIO,
+	GPIO32_GPIO,
+	GPIO17_GPIO,
+	GPIO16_GPIO,
+};
+
+int __init am200_init(void)
 {
 	int ret;
 
@@ -339,6 +352,8 @@ static int __init am200_init(void)
 	 * creation events */
 	fb_register_client(&am200_fb_notif);
 
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(am200_pin_config));
+
 	/* request our platform independent driver */
 	request_module("metronomefb");
 
@@ -367,8 +382,6 @@ static int __init am200_init(void)
 module_param(panel_type, uint, 0);
 MODULE_PARM_DESC(panel_type, "Select the panel type: 6, 8, 97");
 
-module_init(am200_init);
-
 MODULE_DESCRIPTION("board driver for am200 metronome epd kit");
 MODULE_AUTHOR("Jaya Kumar");
 MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index ca8e205..40b7740 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -12,53 +12,16 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 
+#include <asm/clkdev.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
 #include <mach/hardware.h>
 
 #include "devices.h"
 #include "generic.h"
 #include "clock.h"
 
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
 static DEFINE_SPINLOCK(clocks_lock);
 
-static struct clk *clk_lookup(struct device *dev, const char *id)
-{
-	struct clk *p;
-
-	list_for_each_entry(p, &clocks, node)
-		if (strcmp(id, p->name) == 0 && p->dev == dev)
-			return p;
-
-	return NULL;
-}
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-
-	mutex_lock(&clocks_mutex);
-	p = clk_lookup(dev, id);
-	if (!p)
-		p = clk_lookup(NULL, id);
-	if (p)
-		clk = p;
-	mutex_unlock(&clocks_mutex);
-
-	if (!IS_ERR(clk) && clk->ops == NULL)
-		clk = clk->other;
-
-	return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
@@ -116,37 +79,27 @@ const struct clkops clk_cken_ops = {
 	.disable	= clk_cken_disable,
 };
 
-void clks_register(struct clk *clks, size_t num)
+void clks_register(struct clk_lookup *clks, size_t num)
 {
 	int i;
 
-	mutex_lock(&clocks_mutex);
 	for (i = 0; i < num; i++)
-		list_add(&clks[i].node, &clocks);
-	mutex_unlock(&clocks_mutex);
+		clkdev_add(&clks[i]);
 }
 
 int clk_add_alias(char *alias, struct device *alias_dev, char *id,
 	struct device *dev)
 {
-	struct clk *r = clk_lookup(dev, id);
-	struct clk *new;
+	struct clk *r = clk_get(dev, id);
+	struct clk_lookup *l;
 
 	if (!r)
 		return -ENODEV;
 
-	new = kzalloc(sizeof(struct clk), GFP_KERNEL);
-
-	if (!new)
-		return -ENOMEM;
-
-	new->name = alias;
-	new->dev = alias_dev;
-	new->other = r;
-
-	mutex_lock(&clocks_mutex);
-	list_add(&new->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-
+	l = clkdev_alloc(r, alias, alias_dev ? dev_name(alias_dev) : NULL);
+	clk_put(r);
+	if (!l)
+		return -ENODEV;
+	clkdev_add(l);
 	return 0;
 }
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 73be795..4e9c613 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -1,6 +1,4 @@
-#include <linux/list.h>
-
-struct clk;
+#include <asm/clkdev.h>
 
 struct clkops {
 	void			(*enable)(struct clk *);
@@ -9,9 +7,6 @@ struct clkops {
 };
 
 struct clk {
-	struct list_head	node;
-	const char		*name;
-	struct device		*dev;
 	const struct clkops	*ops;
 	unsigned long		rate;
 	unsigned int		cken;
@@ -20,41 +15,31 @@ struct clk {
 	struct clk		*other;
 };
 
-#define INIT_CKEN(_name, _cken, _rate, _delay, _dev)	\
+#define INIT_CLKREG(_clk,_devname,_conname)		\
 	{						\
-		.name	= _name,			\
-		.dev	= _dev,				\
+		.clk		= _clk,			\
+		.dev_id		= _devname,		\
+		.con_id		= _conname,		\
+	}
+
+#define DEFINE_CKEN(_name, _cken, _rate, _delay)	\
+struct clk clk_##_name = {				\
 		.ops	= &clk_cken_ops,		\
 		.rate	= _rate,			\
 		.cken	= CKEN_##_cken,			\
 		.delay	= _delay,			\
 	}
 
-#define INIT_CK(_name, _cken, _ops, _dev)		\
-	{						\
-		.name	= _name,			\
-		.dev	= _dev,				\
+#define DEFINE_CK(_name, _cken, _ops)			\
+struct clk clk_##_name = {				\
 		.ops	= _ops,				\
 		.cken	= CKEN_##_cken,			\
 	}
 
-/*
- * This is a placeholder to alias one clock device+name pair
- * to another struct clk.
- */
-#define INIT_CKOTHER(_name, _other, _dev)		\
-	{						\
-		.name	= _name,			\
-		.dev	= _dev,				\
-		.other	= _other,			\
-	}
-
-#define INIT_CLK(_name, _ops, _rate, _delay, _dev)      \
-	{                                               \
-		.name   = _name,                        \
-		.dev    = _dev,                         \
-		.ops    = _ops,                         \
-		.rate   = _rate,                        \
+#define DEFINE_CLK(_name, _ops, _rate, _delay)		\
+struct clk clk_##_name = {				\
+		.ops	= _ops, 			\
+		.rate	= _rate,			\
 		.delay	= _delay,			\
 	}
 
@@ -64,20 +49,16 @@ void clk_cken_enable(struct clk *clk);
 void clk_cken_disable(struct clk *clk);
 
 #ifdef CONFIG_PXA3xx
-#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)	\
-	{						\
-		.name	= _name,			\
-		.dev	= _dev,				\
+#define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay)	\
+struct clk clk_##_name = {				\
 		.ops	= &clk_pxa3xx_cken_ops,		\
 		.rate	= _rate,			\
 		.cken	= CKEN_##_cken,			\
 		.delay	= _delay,			\
 	}
 
-#define PXA3xx_CK(_name, _cken, _ops, _dev)		\
-	{						\
-		.name	= _name,			\
-		.dev	= _dev,				\
+#define DEFINE_PXA3_CK(_name, _cken, _ops)		\
+struct clk clk_##_name = {				\
 		.ops	= _ops,				\
 		.cken	= CKEN_##_cken,			\
 	}
@@ -87,7 +68,7 @@ extern void clk_pxa3xx_cken_enable(struct clk *);
 extern void clk_pxa3xx_cken_disable(struct clk *);
 #endif
 
-void clks_register(struct clk *clks, size_t num);
+void clks_register(struct clk_lookup *clks, size_t num);
 int clk_add_alias(char *alias, struct device *alias_dev, char *id,
 	struct device *dev);
 
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index 0b3ce3b..d99fd9e 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -210,10 +210,8 @@ static struct pxafb_mode_info generic_stn_320x240_mode = {
 static struct pxafb_mach_info generic_stn_320x240 = {
 	.modes		= &generic_stn_320x240_mode,
 	.num_modes	= 1,
-	.lccr0		= 0,
-	.lccr3		= (LCCR3_PixClkDiv(0x03) |
-			   LCCR3_Acb(0xff) |
-			   LCCR3_PCP),
+	.lcd_conn	= LCD_COLOR_STN_8BPP | LCD_PCLK_EDGE_FALL |\
+			  LCD_AC_BIAS_FREQ(0xff),
 	.cmap_inverse	= 0,
 	.cmap_static	= 0,
 };
@@ -236,10 +234,8 @@ static struct pxafb_mode_info generic_tft_640x480_mode = {
 static struct pxafb_mach_info generic_tft_640x480 = {
 	.modes		= &generic_tft_640x480_mode,
 	.num_modes	= 1,
-	.lccr0		= (LCCR0_PAS),
-	.lccr3		= (LCCR3_PixClkDiv(0x01) |
-			   LCCR3_Acb(0xff) |
-			   LCCR3_PCP),
+	.lcd_conn	= LCD_COLOR_TFT_8BPP | LCD_PCLK_EDGE_FALL |\
+			  LCD_AC_BIAS_FREQ(0xff),
 	.cmap_inverse	= 0,
 	.cmap_static	= 0,
 };
@@ -263,9 +259,7 @@ static struct pxafb_mode_info generic_crt_640x480_mode = {
 static struct pxafb_mach_info generic_crt_640x480 = {
 	.modes		= &generic_crt_640x480_mode,
 	.num_modes	= 1,
-	.lccr0		= (LCCR0_PAS),
-	.lccr3		= (LCCR3_PixClkDiv(0x01) |
-			   LCCR3_Acb(0xff)),
+	.lcd_conn	= LCD_COLOR_TFT_8BPP | LCD_AC_BIAS_FREQ(0xff),
 	.cmap_inverse	= 0,
 	.cmap_static	= 0,
 };
@@ -289,9 +283,7 @@ static struct pxafb_mode_info generic_crt_800x600_mode = {
 static struct pxafb_mach_info generic_crt_800x600 = {
 	.modes		= &generic_crt_800x600_mode,
 	.num_modes	= 1,
-	.lccr0		= (LCCR0_PAS),
-	.lccr3		= (LCCR3_PixClkDiv(0x02) |
-			   LCCR3_Acb(0xff)),
+	.lcd_conn	= LCD_COLOR_TFT_8BPP | LCD_AC_BIAS_FREQ(0xff),
 	.cmap_inverse	= 0,
 	.cmap_static	= 0,
 };
@@ -314,10 +306,7 @@ static struct pxafb_mode_info generic_tft_320x240_mode = {
 static struct pxafb_mach_info generic_tft_320x240 = {
 	.modes		= &generic_tft_320x240_mode,
 	.num_modes	= 1,
-	.lccr0		= (LCCR0_PAS),
-	.lccr3		= (LCCR3_PixClkDiv(0x06) |
-			   LCCR3_Acb(0xff) |
-			   LCCR3_PCP),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_AC_BIAS_FREQ(0xff),
 	.cmap_inverse	= 0,
 	.cmap_static	= 0,
 };
@@ -341,9 +330,7 @@ static struct pxafb_mode_info generic_stn_640x480_mode = {
 static struct pxafb_mach_info generic_stn_640x480 = {
 	.modes		= &generic_stn_640x480_mode,
 	.num_modes	= 1,
-	.lccr0		= 0,
-	.lccr3		= (LCCR3_PixClkDiv(0x02) |
-			   LCCR3_Acb(0xff)),
+	.lcd_conn	= LCD_COLOR_STN_8BPP | LCD_AC_BIAS_FREQ(0xff),
 	.cmap_inverse	= 0,
 	.cmap_static	= 0,
 };
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index deb46cd..ff0c577 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -31,7 +31,6 @@
 #include <mach/mfp-pxa300.h>
 
 #include <mach/hardware.h>
-#include <mach/gpio.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
@@ -137,6 +136,10 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
 	GPIO82_GPIO | MFP_PULL_HIGH,	/* MMC CD */
 	GPIO85_GPIO,			/* MMC WP */
 	GPIO99_GPIO,			/* Ethernet IRQ */
+
+	/* Standard I2C */
+	GPIO21_I2C_SCL,
+	GPIO22_I2C_SDA,
 };
 
 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 65558d6..c5e28a4 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -19,6 +19,7 @@
 #include <linux/fs.h>
 #include <linux/interrupt.h>
 #include <linux/mmc/host.h>
+#include <linux/mtd/physmap.h>
 #include <linux/pm.h>
 #include <linux/gpio.h>
 #include <linux/backlight.h>
@@ -541,11 +542,42 @@ err_free_1:
 static inline void corgi_init_spi(void) {}
 #endif
 
+static struct mtd_partition sharpsl_rom_parts[] = {
+	{
+		.name	="Boot PROM Filesystem",
+		.offset	= 0x00120000,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data sharpsl_rom_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
+	.parts		= sharpsl_rom_parts,
+};
+
+static struct resource sharpsl_rom_resources[] = {
+	{
+		.start	= 0x00000000,
+		.end	= 0x007fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device sharpsl_rom_device = {
+	.name	= "physmap-flash",
+	.id	= -1,
+	.resource = sharpsl_rom_resources,
+	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
+	.dev.platform_data = &sharpsl_rom_data,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&corgiscoop_device,
 	&corgifb_device,
 	&corgikbd_device,
 	&corgiled_device,
+	&sharpsl_rom_device,
 };
 
 static void corgi_poweroff(void)
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 1f272ea..771dd4e 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -64,7 +64,7 @@ typedef struct {
 
 /* Define the refresh period in mSec for the SDRAM and the number of rows */
 #define SDRAM_TREF	64	/* standard 64ms SDRAM */
-#define SDRAM_ROWS	4096	/* 64MB=8192 32MB=4096 */
+static unsigned int sdram_rows;
 
 #define CCLKCFG_TURBO		0x1
 #define CCLKCFG_FCS		0x2
@@ -73,6 +73,9 @@ typedef struct {
 #define MDREFR_DB2_MASK		(MDREFR_K2DB2 | MDREFR_K1DB2)
 #define MDREFR_DRI_MASK		0xFFF
 
+#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3)
+#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3)
+
 /*
  * PXA255 definitions
  */
@@ -109,6 +112,10 @@ static struct cpufreq_frequency_table
 static struct cpufreq_frequency_table
 	pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
 
+static unsigned int pxa255_turbo_table;
+module_param(pxa255_turbo_table, uint, 0);
+MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)");
+
 /*
  * PXA270 definitions
  *
@@ -158,22 +165,16 @@ static struct cpufreq_frequency_table
 
 extern unsigned get_clk_frequency_khz(int info);
 
-static void find_freq_tables(struct cpufreq_policy *policy,
-			     struct cpufreq_frequency_table **freq_table,
+static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
 			     pxa_freqs_t **pxa_freqs)
 {
 	if (cpu_is_pxa25x()) {
-		if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
+		if (!pxa255_turbo_table) {
 			*pxa_freqs = pxa255_run_freqs;
 			*freq_table = pxa255_run_freq_table;
-		} else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
+		} else {
 			*pxa_freqs = pxa255_turbo_freqs;
 			*freq_table = pxa255_turbo_freq_table;
-		} else {
-			printk("CPU PXA: Unknown policy found. "
-			       "Using CPUFREQ_POLICY_PERFORMANCE\n");
-			*pxa_freqs = pxa255_run_freqs;
-			*freq_table = pxa255_run_freq_table;
 		}
 	}
 	if (cpu_is_pxa27x()) {
@@ -194,14 +195,28 @@ static void pxa27x_guess_max_freq(void)
 	}
 }
 
+static void init_sdram_rows(void)
+{
+	uint32_t mdcnfg = MDCNFG;
+	unsigned int drac2 = 0, drac0 = 0;
+
+	if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
+		drac2 = MDCNFG_DRAC2(mdcnfg);
+
+	if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
+		drac0 = MDCNFG_DRAC0(mdcnfg);
+
+	sdram_rows = 1 << (11 + max(drac0, drac2));
+}
+
 static u32 mdrefr_dri(unsigned int freq)
 {
 	u32 dri = 0;
 
 	if (cpu_is_pxa25x())
-		dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS * 32));
+		dri = ((freq * SDRAM_TREF) / (sdram_rows * 32));
 	if (cpu_is_pxa27x())
-		dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS - 31)) / 32;
+		dri = ((freq * SDRAM_TREF) / (sdram_rows - 31)) / 32;
 	return dri;
 }
 
@@ -212,7 +227,7 @@ static int pxa_verify_policy(struct cpufreq_policy *policy)
 	pxa_freqs_t *pxa_freqs;
 	int ret;
 
-	find_freq_tables(policy, &pxa_freqs_table, &pxa_freqs);
+	find_freq_tables(&pxa_freqs_table, &pxa_freqs);
 	ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
 
 	if (freq_debug)
@@ -240,7 +255,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
 
 	/* Get the current policy */
-	find_freq_tables(policy, &pxa_freqs_table, &pxa_freq_settings);
+	find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
 
 	/* Lookup the next frequency */
 	if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
@@ -329,11 +344,15 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
 {
 	int i;
 	unsigned int freq;
+	struct cpufreq_frequency_table *pxa255_freq_table;
+	pxa_freqs_t *pxa255_freqs;
 
 	/* try to guess pxa27x cpu */
 	if (cpu_is_pxa27x())
 		pxa27x_guess_max_freq();
 
+	init_sdram_rows();
+
 	/* set default policy and cpuinfo */
 	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
 	policy->cur = get_clk_frequency_khz(0);	   /* current freq */
@@ -354,6 +373,8 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
 	}
 	pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
 
+	pxa255_turbo_table = !!pxa255_turbo_table;
+
 	/* Generate the pxa27x cpufreq_frequency_table struct */
 	for (i = 0; i < NUM_PXA27x_FREQS; i++) {
 		freq = pxa27x_freqs[i].khz;
@@ -368,8 +389,12 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
 	 * Set the policy's minimum and maximum frequencies from the tables
 	 * just constructed.  This sets cpuinfo.mxx_freq, min and max.
 	 */
-	if (cpu_is_pxa25x())
-		cpufreq_frequency_table_cpuinfo(policy, pxa255_run_freq_table);
+	if (cpu_is_pxa25x()) {
+		find_freq_tables(&pxa255_freq_table, &pxa255_freqs);
+		pr_info("PXA255 cpufreq using %s frequency table\n",
+			pxa255_turbo_table ? "turbo" : "run");
+		cpufreq_frequency_table_cpuinfo(policy, pxa255_freq_table);
+	}
 	else if (cpu_is_pxa27x())
 		cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table);
 
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 35736fc..e16f8e3 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,13 +4,12 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <mach/gpio.h>
+#include <mach/pxa-regs.h>
 #include <mach/udc.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/i2c.h>
-#include <mach/mfp-pxa27x.h>
 #include <mach/ohci.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa2xx_spi.h>
@@ -156,8 +155,8 @@ void __init set_pxa_fb_parent(struct device *parent_dev)
 
 static struct resource pxa_resource_ffuart[] = {
 	{
-		.start	= __PREG(FFUART),
-		.end	= __PREG(FFUART) + 35,
+		.start	= 0x40100000,
+		.end	= 0x40100023,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= IRQ_FFUART,
@@ -175,8 +174,8 @@ struct platform_device pxa_device_ffuart= {
 
 static struct resource pxa_resource_btuart[] = {
 	{
-		.start	= __PREG(BTUART),
-		.end	= __PREG(BTUART) + 35,
+		.start	= 0x40200000,
+		.end	= 0x40200023,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= IRQ_BTUART,
@@ -194,8 +193,8 @@ struct platform_device pxa_device_btuart = {
 
 static struct resource pxa_resource_stuart[] = {
 	{
-		.start	= __PREG(STUART),
-		.end	= __PREG(STUART) + 35,
+		.start	= 0x40700000,
+		.end	= 0x40700023,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= IRQ_STUART,
@@ -213,8 +212,8 @@ struct platform_device pxa_device_stuart = {
 
 static struct resource pxa_resource_hwuart[] = {
 	{
-		.start	= __PREG(HWUART),
-		.end	= __PREG(HWUART) + 47,
+		.start	= 0x41600000,
+		.end	= 0x4160002F,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= IRQ_HWUART,
@@ -249,18 +248,53 @@ struct platform_device pxa_device_i2c = {
 	.num_resources	= ARRAY_SIZE(pxai2c_resources),
 };
 
-static unsigned long pxa27x_i2c_mfp_cfg[] = {
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-};
-
 void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
 {
-	if (cpu_is_pxa27x())
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(pxa27x_i2c_mfp_cfg));
 	pxa_register_device(&pxa_device_i2c, info);
 }
 
+#ifdef CONFIG_PXA27x
+static struct resource pxa27x_resources_i2c_power[] = {
+	{
+		.start	= 0x40f00180,
+		.end	= 0x40f001a3,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_PWRI2C,
+		.end	= IRQ_PWRI2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa27x_device_i2c_power = {
+	.name		= "pxa2xx-i2c",
+	.id		= 1,
+	.resource	= pxa27x_resources_i2c_power,
+	.num_resources	= ARRAY_SIZE(pxa27x_resources_i2c_power),
+};
+#endif
+
+#ifdef CONFIG_PXA3xx
+static struct resource pxa3xx_resources_i2c_power[] = {
+	{
+		.start  = 0x40f500c0,
+		.end    = 0x40f500d3,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_PWRI2C,
+		.end	= IRQ_PWRI2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa3xx_device_i2c_power = {
+	.name		= "pxa2xx-i2c",
+	.id		= 1,
+	.resource	= pxa3xx_resources_i2c_power,
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_i2c_power),
+};
+#endif
+
 static struct resource pxai2s_resources[] = {
 	{
 		.start	= 0x40400000,
@@ -296,11 +330,36 @@ void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
 	pxa_register_device(&pxa_device_ficp, info);
 }
 
-struct platform_device pxa_device_rtc = {
+static struct resource pxa_rtc_resources[] = {
+	[0] = {
+		.start  = 0x40900000,
+		.end	= 0x40900000 + 0x3b,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_RTC1Hz,
+		.end    = IRQ_RTC1Hz,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start  = IRQ_RTCAlrm,
+		.end    = IRQ_RTCAlrm,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device sa1100_device_rtc = {
 	.name		= "sa1100-rtc",
 	.id		= -1,
 };
 
+struct platform_device pxa_device_rtc = {
+	.name		= "pxa-rtc",
+	.id		= -1,
+	.num_resources  = ARRAY_SIZE(pxa_rtc_resources),
+	.resource       = pxa_rtc_resources,
+};
+
 static struct resource pxa_ac97_resources[] = {
 	[0] = {
 		.start  = 0x40500000,
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index bb04af4..ecc24a4 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -11,6 +11,7 @@ extern struct platform_device pxa_device_hwuart;
 extern struct platform_device pxa_device_i2c;
 extern struct platform_device pxa_device_i2s;
 extern struct platform_device pxa_device_ficp;
+extern struct platform_device sa1100_device_rtc;
 extern struct platform_device pxa_device_rtc;
 extern struct platform_device pxa_device_ac97;
 
diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c
index c0be17e..b1514fb 100644
--- a/arch/arm/mach-pxa/dma.c
+++ b/arch/arm/mach-pxa/dma.c
@@ -21,7 +21,7 @@
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
-#include <asm/dma.h>
+#include <mach/dma.h>
 
 #include <mach/pxa-regs.h>
 
diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c
index d488ede..1bd7f74 100644
--- a/arch/arm/mach-pxa/e330.c
+++ b/arch/arm/mach-pxa/e330.c
@@ -1,5 +1,5 @@
 /*
- * Hardware definitions for the Toshiba eseries PDAs
+ * Hardware definitions for the Toshiba e330 PDAs
  *
  * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
  *
@@ -12,6 +12,9 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/tc6387xb.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
@@ -19,13 +22,44 @@
 
 #include <mach/mfp-pxa25x.h>
 #include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/eseries-gpio.h>
 #include <mach/udc.h>
 
 #include "generic.h"
 #include "eseries.h"
+#include "clock.h"
+
+/* -------------------- e330 tc6387xb parameters -------------------- */
+
+static struct tc6387xb_platform_data e330_tc6387xb_info = {
+	.enable   = &eseries_tmio_enable,
+	.disable  = &eseries_tmio_disable,
+	.suspend  = &eseries_tmio_suspend,
+	.resume   = &eseries_tmio_resume,
+};
+
+static struct platform_device e330_tc6387xb_device = {
+	.name           = "tc6387xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e330_tc6387xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* --------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+	&e330_tc6387xb_device,
+};
 
 static void __init e330_init(void)
 {
+	eseries_register_clks();
+	eseries_get_tmio_gpios();
+	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_udc_info(&e7xx_udc_mach_info);
 }
 
diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c
index 8ecbc54..2511293 100644
--- a/arch/arm/mach-pxa/e350.c
+++ b/arch/arm/mach-pxa/e350.c
@@ -1,5 +1,5 @@
 /*
- * Hardware definitions for the Toshiba eseries PDAs
+ * Hardware definitions for the Toshiba e350 PDAs
  *
  * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
  *
@@ -12,20 +12,54 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/t7l66xb.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
 #include <mach/mfp-pxa25x.h>
+#include <mach/pxa-regs.h>
 #include <mach/hardware.h>
+#include <mach/eseries-gpio.h>
 #include <mach/udc.h>
 
 #include "generic.h"
 #include "eseries.h"
+#include "clock.h"
+
+/* -------------------- e350 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e350_t7l66xb_info = {
+	.irq_base               = IRQ_BOARD_START,
+	.enable                 = &eseries_tmio_enable,
+	.suspend                = &eseries_tmio_suspend,
+	.resume                 = &eseries_tmio_resume,
+};
+
+static struct platform_device e350_t7l66xb_device = {
+	.name           = "t7l66xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e350_t7l66xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+	&e350_t7l66xb_device,
+};
 
 static void __init e350_init(void)
 {
+	eseries_register_clks();
+	eseries_get_tmio_gpios();
+	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_udc_info(&e7xx_udc_mach_info);
 }
 
diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
index 544bbaa..bed0336 100644
--- a/arch/arm/mach-pxa/e400.c
+++ b/arch/arm/mach-pxa/e400.c
@@ -12,20 +12,26 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/t7l66xb.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/pxa-regs.h>
 #include <mach/mfp-pxa25x.h>
+#include <mach/pxa-regs.h>
 #include <mach/hardware.h>
-
+#include <mach/eseries-gpio.h>
 #include <mach/pxafb.h>
 #include <mach/udc.h>
 
 #include "generic.h"
 #include "eseries.h"
+#include "clock.h"
 
 /* ------------------------ E400 LCD definitions ------------------------ */
 
@@ -46,7 +52,7 @@ static struct pxafb_mode_info e400_pxafb_mode_info = {
 static struct pxafb_mach_info e400_pxafb_mach_info = {
 	.modes          = &e400_pxafb_mode_info,
 	.num_modes      = 1,
-	.lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
 	.lccr3          = 0,
 	.pxafb_backlight_power  = NULL,
 };
@@ -65,7 +71,10 @@ static unsigned long e400_pin_config[] __initdata = {
 	GPIO42_BTUART_RXD,
 	GPIO43_BTUART_TXD,
 	GPIO44_BTUART_CTS,
-	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+	/* TMIO controller */
+	GPIO19_GPIO, /* t7l66xb #PCLR */
+	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
 
 	/* wakeup */
 	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
@@ -73,10 +82,60 @@ static unsigned long e400_pin_config[] __initdata = {
 
 /* ---------------------------------------------------------------------- */
 
+static struct mtd_partition partition_a = {
+	.name = "Internal NAND flash",
+	.offset =  0,
+	.size =  MTDPART_SIZ_FULL,
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
+	.options = 0,
+	.offs = 4,
+	.len = 2,
+	.pattern = scan_ff_pattern
+};
+
+static struct tmio_nand_data e400_t7l66xb_nand_config = {
+	.num_partitions = 1,
+	.partition = &partition_a,
+	.badblock_pattern = &e400_t7l66xb_nand_bbt,
+};
+
+static struct t7l66xb_platform_data e400_t7l66xb_info = {
+	.irq_base 		= IRQ_BOARD_START,
+	.enable                 = &eseries_tmio_enable,
+	.suspend                = &eseries_tmio_suspend,
+	.resume                 = &eseries_tmio_resume,
+
+	.nand_data              = &e400_t7l66xb_nand_config,
+};
+
+static struct platform_device e400_t7l66xb_device = {
+	.name           = "t7l66xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e400_t7l66xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+	&e400_t7l66xb_device,
+};
+
 static void __init e400_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+	/* Fixme - e400 may have a switched clock */
+	eseries_register_clks();
+	eseries_get_tmio_gpios();
 	set_pxa_fb_info(&e400_pxafb_mach_info);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_udc_info(&e7xx_udc_mach_info);
 }
 
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index c57a15b..b00d670 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -15,6 +15,8 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/fb.h>
+#include <linux/clk.h>
+#include <linux/mfd/t7l66xb.h>
 
 #include <video/w100fb.h>
 
@@ -23,12 +25,16 @@
 #include <asm/mach-types.h>
 
 #include <mach/mfp-pxa25x.h>
+#include <mach/pxa-regs.h>
 #include <mach/hardware.h>
+#include <mach/eseries-gpio.h>
 #include <mach/udc.h>
+#include <mach/irda.h>
 
 #include "generic.h"
 #include "eseries.h"
-
+#include "clock.h"
+#include "devices.h"
 
 /* ------------------------ e740 video support --------------------------- */
 
@@ -116,7 +122,17 @@ static unsigned long e740_pin_config[] __initdata = {
 	GPIO42_BTUART_RXD,
 	GPIO43_BTUART_TXD,
 	GPIO44_BTUART_CTS,
-	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+	/* TMIO controller */
+	GPIO19_GPIO, /* t7l66xb #PCLR */
+	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+	/* UDC */
+	GPIO13_GPIO,
+	GPIO3_GPIO,
+
+	/* IrDA */
+	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
 	/* PC Card */
 	GPIO8_GPIO,   /* CD0 */
@@ -142,17 +158,43 @@ static unsigned long e740_pin_config[] __initdata = {
 	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
 };
 
+/* -------------------- e740 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e740_t7l66xb_info = {
+	.irq_base 		= IRQ_BOARD_START,
+	.enable                 = &eseries_tmio_enable,
+	.suspend                = &eseries_tmio_suspend,
+	.resume                 = &eseries_tmio_resume,
+};
+
+static struct platform_device e740_t7l66xb_device = {
+	.name           = "t7l66xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e740_t7l66xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
 /* ----------------------------------------------------------------------- */
 
 static struct platform_device *devices[] __initdata = {
 	&e740_fb_device,
+	&e740_t7l66xb_device,
 };
 
 static void __init e740_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+	eseries_register_clks();
+	clk_add_alias("CLK_CK48M", &e740_t7l66xb_device.dev,
+			"UDCCLK", &pxa25x_device_udc.dev),
+	eseries_get_tmio_gpios();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_udc_info(&e7xx_udc_mach_info);
+	e7xx_irda_init();
+	pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
 
 MACHINE_START(E740, "Toshiba e740")
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index 640e738..84d7c1a 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -15,6 +15,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/fb.h>
+#include <linux/mfd/tc6393xb.h>
 
 #include <video/w100fb.h>
 
@@ -23,11 +24,15 @@
 #include <asm/mach-types.h>
 
 #include <mach/mfp-pxa25x.h>
+#include <mach/pxa-regs.h>
 #include <mach/hardware.h>
+#include <mach/eseries-gpio.h>
 #include <mach/udc.h>
+#include <mach/irda.h>
 
 #include "generic.h"
 #include "eseries.h"
+#include "clock.h"
 
 /* ---------------------- E750 LCD definitions -------------------- */
 
@@ -100,16 +105,45 @@ static struct platform_device e750_fb_device = {
 	.resource       = e750_fb_resources,
 };
 
-/* ----------------------------------------------------------------------- */
+/* ----------------- e750 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e750_tc6393xb_info = {
+	.irq_base       = IRQ_BOARD_START,
+	.scr_pll2cr     = 0x0cc1,
+	.scr_gper       = 0,
+	.gpio_base      = -1,
+	.suspend        = &eseries_tmio_suspend,
+	.resume         = &eseries_tmio_resume,
+	.enable         = &eseries_tmio_enable,
+	.disable        = &eseries_tmio_disable,
+};
+
+static struct platform_device e750_tc6393xb_device = {
+	.name           = "tc6393xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e750_tc6393xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ------------------------------------------------------------- */
 
 static struct platform_device *devices[] __initdata = {
 	&e750_fb_device,
+	&e750_tc6393xb_device,
 };
 
 static void __init e750_init(void)
 {
+	clk_add_alias("CLK_CK3P6MI", &e750_tc6393xb_device.dev,
+			"GPIO11_CLK", NULL),
+	eseries_get_tmio_gpios();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_udc_info(&e7xx_udc_mach_info);
+	e7xx_irda_init();
+	pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
 
 MACHINE_START(E750, "Toshiba e750")
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
index a293e09..9a86a42 100644
--- a/arch/arm/mach-pxa/e800.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -15,6 +15,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/fb.h>
+#include <linux/mfd/tc6393xb.h>
 
 #include <video/w100fb.h>
 
@@ -23,12 +24,14 @@
 #include <asm/mach-types.h>
 
 #include <mach/mfp-pxa25x.h>
+#include <mach/pxa-regs.h>
 #include <mach/hardware.h>
 #include <mach/eseries-gpio.h>
 #include <mach/udc.h>
 
 #include "generic.h"
 #include "eseries.h"
+#include "clock.h"
 
 /* ------------------------ e800 LCD definitions ------------------------- */
 
@@ -160,14 +163,41 @@ static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
 	.gpio_pullup_inverted = 1
 };
 
+/* ----------------- e800 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e800_tc6393xb_info = {
+	.irq_base       = IRQ_BOARD_START,
+	.scr_pll2cr     = 0x0cc1,
+	.scr_gper       = 0,
+	.gpio_base      = -1,
+	.suspend        = &eseries_tmio_suspend,
+	.resume         = &eseries_tmio_resume,
+	.enable         = &eseries_tmio_enable,
+	.disable        = &eseries_tmio_disable,
+};
+
+static struct platform_device e800_tc6393xb_device = {
+	.name           = "tc6393xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e800_tc6393xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
 /* ----------------------------------------------------------------------- */
 
 static struct platform_device *devices[] __initdata = {
 	&e800_fb_device,
+	&e800_tc6393xb_device,
 };
 
 static void __init e800_init(void)
 {
+	clk_add_alias("CLK_CK3P6MI", &e800_tc6393xb_device.dev,
+			"GPIO11_CLK", NULL),
+	eseries_get_tmio_gpios();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_udc_info(&e800_udc_mach_info);
 }
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index d28849b..dfce7d5 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -12,6 +12,9 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
@@ -21,8 +24,10 @@
 #include <mach/hardware.h>
 #include <mach/eseries-gpio.h>
 #include <mach/udc.h>
+#include <mach/irda.h>
 
 #include "generic.h"
+#include "clock.h"
 
 /* Only e800 has 128MB RAM */
 void __init eseries_fixup(struct machine_desc *desc,
@@ -43,3 +48,122 @@ struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
 	.gpio_pullup_inverted = 1
 };
 
+static void e7xx_irda_transceiver_mode(struct device *dev, int mode)
+{
+	if (mode & IR_OFF) {
+		gpio_set_value(GPIO_E7XX_IR_OFF, 1);
+		pxa2xx_transceiver_mode(dev, mode);
+	} else {
+		pxa2xx_transceiver_mode(dev, mode);
+		gpio_set_value(GPIO_E7XX_IR_OFF, 0);
+	}
+}
+
+int e7xx_irda_init(void)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_E7XX_IR_OFF, "IrDA power");
+	if (ret)
+		goto out;
+
+	ret = gpio_direction_output(GPIO_E7XX_IR_OFF, 0);
+	if (ret)
+		goto out;
+
+	e7xx_irda_transceiver_mode(NULL, IR_SIRMODE | IR_OFF);
+out:
+	return ret;
+}
+
+static void e7xx_irda_shutdown(struct device *dev)
+{
+	e7xx_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
+	gpio_free(GPIO_E7XX_IR_OFF);
+}
+
+struct pxaficp_platform_data e7xx_ficp_platform_data = {
+	.transceiver_cap  = IR_SIRMODE | IR_OFF,
+	.transceiver_mode = e7xx_irda_transceiver_mode,
+	.shutdown = e7xx_irda_shutdown,
+};
+
+int eseries_tmio_enable(struct platform_device *dev)
+{
+	/* Reset - bring SUSPEND high before PCLR */
+	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
+	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
+	msleep(1);
+	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
+	msleep(1);
+	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 1);
+	msleep(1);
+	return 0;
+}
+
+int eseries_tmio_disable(struct platform_device *dev)
+{
+	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
+	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
+	return 0;
+}
+
+int eseries_tmio_suspend(struct platform_device *dev)
+{
+	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
+	return 0;
+}
+
+int eseries_tmio_resume(struct platform_device *dev)
+{
+	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
+	msleep(1);
+	return 0;
+}
+
+void eseries_get_tmio_gpios(void)
+{
+	gpio_request(GPIO_ESERIES_TMIO_SUSPEND, NULL);
+	gpio_request(GPIO_ESERIES_TMIO_PCLR, NULL);
+	gpio_direction_output(GPIO_ESERIES_TMIO_SUSPEND, 0);
+	gpio_direction_output(GPIO_ESERIES_TMIO_PCLR, 0);
+}
+
+/* TMIO controller uses the same resources on all e-series machines. */
+struct resource eseries_tmio_resources[] = {
+	[0] = {
+		.start  = PXA_CS4_PHYS,
+		.end    = PXA_CS4_PHYS + 0x1fffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ),
+		.end    = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+/* Some e-series hardware cannot control the 32K clock */
+static void clk_32k_dummy(struct clk *clk)
+{
+}
+
+static const struct clkops clk_32k_dummy_ops = {
+	.enable         = clk_32k_dummy,
+	.disable        = clk_32k_dummy,
+};
+
+static struct clk tmio_dummy_clk = {
+	.ops	= &clk_32k_dummy_ops,
+	.rate	= 32768,
+};
+
+static struct clk_lookup eseries_clkregs[] = {
+	INIT_CLKREG(&tmio_dummy_clk, NULL, "CLK_CK32K"),
+};
+
+void eseries_register_clks(void)
+{
+	clks_register(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
+}
+
diff --git a/arch/arm/mach-pxa/eseries.h b/arch/arm/mach-pxa/eseries.h
index a83f88d..5930f5e 100644
--- a/arch/arm/mach-pxa/eseries.h
+++ b/arch/arm/mach-pxa/eseries.h
@@ -2,3 +2,15 @@ void __init eseries_fixup(struct machine_desc *desc,
 	struct tag *tags, char **cmdline, struct meminfo *mi);
 
 extern struct pxa2xx_udc_mach_info e7xx_udc_mach_info;
+extern struct pxaficp_platform_data e7xx_ficp_platform_data;
+extern int e7xx_irda_init(void);
+
+extern int eseries_tmio_enable(struct platform_device *dev);
+extern int eseries_tmio_disable(struct platform_device *dev);
+extern int eseries_tmio_suspend(struct platform_device *dev);
+extern int eseries_tmio_resume(struct platform_device *dev);
+extern void eseries_get_tmio_gpios(void);
+extern struct resource eseries_tmio_resources[];
+extern struct platform_device e300_tc6387xb_device;
+extern void eseries_register_clks(void);
+
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index cc3d850..df5f822 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -16,11 +16,14 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/pwm_backlight.h>
+#include <linux/input.h>
 
 #include <asm/setup.h>
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
 #include <mach/i2c.h>
+#include <mach/hardware.h>
+#include <mach/pxa27x_keypad.h>
 
 #include <mach/mfp-pxa27x.h>
 #include <mach/pxa-regs.h>
@@ -101,120 +104,732 @@ static unsigned long ezx_pin_config[] __initdata = {
 	GPIO44_BTUART_CTS,
 	GPIO45_BTUART_RTS,
 
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
 
-	/* For A780 support (connected with Neptune GSM chip) */
-	GPIO30_USB_P3_2,	/* ICL_TXENB */
-	GPIO31_USB_P3_6,	/* ICL_VPOUT */
-	GPIO90_USB_P3_5,	/* ICL_VPIN */
-	GPIO91_USB_P3_1,	/* ICL_XRXD */
-	GPIO56_USB_P3_4,	/* ICL_VMOUT */
-	GPIO113_USB_P3_3,	/* /ICL_VMIN */
+	/* PCAP SSP */
+	GPIO29_SSP1_SCLK,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+	GPIO24_GPIO,				/* pcap chip select */
+	GPIO1_GPIO,				/* pcap interrupt */
+	GPIO4_GPIO,				/* WDI_AP */
+	GPIO55_GPIO,				/* SYS_RESTART */
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO11_GPIO,				/* mmc detect */
+
+	/* usb to external transceiver */
+	GPIO34_USB_P2_2,
+	GPIO35_USB_P2_1,
+	GPIO36_USB_P2_4,
+	GPIO39_USB_P2_6,
+	GPIO40_USB_P2_5,
+	GPIO53_USB_P2_3,
+
+	/* usb to Neptune GSM chip */
+	GPIO30_USB_P3_2,
+	GPIO31_USB_P3_6,
+	GPIO90_USB_P3_5,
+	GPIO91_USB_P3_1,
+	GPIO56_USB_P3_4,
+	GPIO113_USB_P3_3,
+};
+
+#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
+static unsigned long gen1_pin_config[] __initdata = {
+	/* flip / lockswitch */
+	GPIO12_GPIO,
+
+	/* bluetooth (bcm2035) */
+	GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
+	GPIO48_GPIO,				/* RESET */
+	GPIO28_GPIO,				/* WAKEUP */
+
+	/* Neptune handshake */
+	GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* BP_RDY */
+	GPIO57_GPIO,				/* AP_RDY */
+	GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* WDI */
+	GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* WDI2 */
+	GPIO82_GPIO,				/* RESET */
+	GPIO99_GPIO,				/* TC_MM_EN */
+
+	/* sound */
+	GPIO52_SSP3_SCLK,
+	GPIO83_SSP3_SFRM,
+	GPIO81_SSP3_TXD,
+	GPIO89_SSP3_RXD,
+
+	/* ssp2 pins to in */
+	GPIO22_GPIO,				/* SSP2_SCLK */
+	GPIO37_GPIO,				/* SSP2_SFRM */
+	GPIO38_GPIO,				/* SSP2_TXD */
+	GPIO88_GPIO,				/* SSP2_RXD */
+
+	/* camera */
+	GPIO23_CIF_MCLK,
+	GPIO54_CIF_PCLK,
+	GPIO85_CIF_LV,
+	GPIO84_CIF_FV,
+	GPIO27_CIF_DD_0,
+	GPIO114_CIF_DD_1,
+	GPIO51_CIF_DD_2,
+	GPIO115_CIF_DD_3,
+	GPIO95_CIF_DD_4,
+	GPIO94_CIF_DD_5,
+	GPIO17_CIF_DD_6,
+	GPIO108_CIF_DD_7,
+	GPIO50_GPIO,				/* CAM_EN */
+	GPIO19_GPIO,				/* CAM_RST */
+
+	/* EMU */
+	GPIO120_GPIO,				/* EMU_MUX1 */
+	GPIO119_GPIO,				/* EMU_MUX2 */
+	GPIO86_GPIO,				/* SNP_INT_CTL */
+	GPIO87_GPIO,				/* SNP_INT_IN */
+};
+#endif
+
+#if defined(CONFIG_MACH_EZX_A1200) || defined(CONFIG_MACH_EZX_A910) || \
+	defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
+static unsigned long gen2_pin_config[] __initdata = {
+	/* flip / lockswitch */
+	GPIO15_GPIO,
+
+	/* EOC */
+	GPIO10_GPIO,
+
+	/* bluetooth (bcm2045) */
+	GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
+	GPIO37_GPIO,				/* RESET */
+	GPIO57_GPIO,				/* WAKEUP */
+
+	/* Neptune handshake */
+	GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* BP_RDY */
+	GPIO96_GPIO,				/* AP_RDY */
+	GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* WDI */
+	GPIO116_GPIO,				/* RESET */
+	GPIO41_GPIO,				/* BP_FLASH */
+
+	/* sound */
+	GPIO52_SSP3_SCLK,
+	GPIO83_SSP3_SFRM,
+	GPIO81_SSP3_TXD,
+	GPIO82_SSP3_RXD,
+
+	/* ssp2 pins to in */
+	GPIO22_GPIO,				/* SSP2_SCLK */
+	GPIO14_GPIO,				/* SSP2_SFRM */
+	GPIO38_GPIO,				/* SSP2_TXD */
+	GPIO88_GPIO,				/* SSP2_RXD */
+
+	/* camera */
+	GPIO23_CIF_MCLK,
+	GPIO54_CIF_PCLK,
+	GPIO85_CIF_LV,
+	GPIO84_CIF_FV,
+	GPIO27_CIF_DD_0,
+	GPIO114_CIF_DD_1,
+	GPIO51_CIF_DD_2,
+	GPIO115_CIF_DD_3,
+	GPIO95_CIF_DD_4,
+	GPIO48_CIF_DD_5,
+	GPIO93_CIF_DD_6,
+	GPIO12_CIF_DD_7,
+	GPIO50_GPIO,				/* CAM_EN */
+	GPIO28_GPIO,				/* CAM_RST */
+	GPIO17_GPIO,				/* CAM_FLASH */
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_A780
+static unsigned long a780_pin_config[] __initdata = {
+	/* keypad */
+	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+
+	/* attenuate sound */
+	GPIO96_GPIO,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_E680
+static unsigned long e680_pin_config[] __initdata = {
+	/* keypad */
+	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO96_KP_DKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_DKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO98_KP_DKIN_5 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+
+	/* MIDI */
+	GPIO79_GPIO,				/* VA_SEL_BUL */
+	GPIO80_GPIO,				/* FLT_SEL_BUL */
+	GPIO78_GPIO,				/* MIDI_RESET */
+	GPIO33_GPIO,				/* MIDI_CS */
+	GPIO15_GPIO,				/* MIDI_IRQ */
+	GPIO49_GPIO,				/* MIDI_NPWE */
+	GPIO18_GPIO,				/* MIDI_RDY */
+
+	/* leds */
+	GPIO46_GPIO,
+	GPIO47_GPIO,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_A1200
+static unsigned long a1200_pin_config[] __initdata = {
+	/* keypad */
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_A910
+static unsigned long a910_pin_config[] __initdata = {
+	/* keypad */
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+
+	/* WLAN */
+	GPIO89_GPIO,				/* RESET */
+	GPIO33_GPIO,				/* WAKEUP */
+	GPIO94_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
+
+	/* MMC CS */
+	GPIO20_GPIO,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_E2
+static unsigned long e2_pin_config[] __initdata = {
+	/* keypad */
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
 };
+#endif
+
+#ifdef CONFIG_MACH_EZX_E6
+static unsigned long e6_pin_config[] __initdata = {
+	/* keypad */
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+};
+#endif
+
+/* KEYPAD */
+#ifdef CONFIG_MACH_EZX_A780
+static unsigned int a780_key_map[] = {
+	KEY(0, 0, KEY_SEND),
+	KEY(0, 1, KEY_BACK),
+	KEY(0, 2, KEY_END),
+	KEY(0, 3, KEY_PAGEUP),
+	KEY(0, 4, KEY_UP),
+
+	KEY(1, 0, KEY_NUMERIC_1),
+	KEY(1, 1, KEY_NUMERIC_2),
+	KEY(1, 2, KEY_NUMERIC_3),
+	KEY(1, 3, KEY_SELECT),
+	KEY(1, 4, KEY_KPENTER),
+
+	KEY(2, 0, KEY_NUMERIC_4),
+	KEY(2, 1, KEY_NUMERIC_5),
+	KEY(2, 2, KEY_NUMERIC_6),
+	KEY(2, 3, KEY_RECORD),
+	KEY(2, 4, KEY_LEFT),
+
+	KEY(3, 0, KEY_NUMERIC_7),
+	KEY(3, 1, KEY_NUMERIC_8),
+	KEY(3, 2, KEY_NUMERIC_9),
+	KEY(3, 3, KEY_HOME),
+	KEY(3, 4, KEY_RIGHT),
+
+	KEY(4, 0, KEY_NUMERIC_STAR),
+	KEY(4, 1, KEY_NUMERIC_0),
+	KEY(4, 2, KEY_NUMERIC_POUND),
+	KEY(4, 3, KEY_PAGEDOWN),
+	KEY(4, 4, KEY_DOWN),
+};
+
+static struct pxa27x_keypad_platform_data a780_keypad_platform_data = {
+	.matrix_key_rows = 5,
+	.matrix_key_cols = 5,
+	.matrix_key_map = a780_key_map,
+	.matrix_key_map_size = ARRAY_SIZE(a780_key_map),
+
+	.direct_key_map = { KEY_CAMERA },
+	.direct_key_num = 1,
+
+	.debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_A780 */
+
+#ifdef CONFIG_MACH_EZX_E680
+static unsigned int e680_key_map[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_RESERVED),
+	KEY(0, 3, KEY_SEND),
+
+	KEY(1, 0, KEY_DOWN),
+	KEY(1, 1, KEY_LEFT),
+	KEY(1, 2, KEY_PAGEUP),
+	KEY(1, 3, KEY_PAGEDOWN),
+
+	KEY(2, 0, KEY_RESERVED),
+	KEY(2, 1, KEY_RESERVED),
+	KEY(2, 2, KEY_RESERVED),
+	KEY(2, 3, KEY_KPENTER),
+};
+
+static struct pxa27x_keypad_platform_data e680_keypad_platform_data = {
+	.matrix_key_rows = 3,
+	.matrix_key_cols = 4,
+	.matrix_key_map = e680_key_map,
+	.matrix_key_map_size = ARRAY_SIZE(e680_key_map),
+
+	.direct_key_map = {
+		KEY_CAMERA,
+		KEY_RESERVED,
+		KEY_RESERVED,
+		KEY_F1,
+		KEY_CANCEL,
+		KEY_F2,
+	},
+	.direct_key_num = 6,
+
+	.debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_E680 */
+
+#ifdef CONFIG_MACH_EZX_A1200
+static unsigned int a1200_key_map[] = {
+	KEY(0, 0, KEY_RESERVED),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_PAGEDOWN),
+	KEY(0, 3, KEY_RESERVED),
+	KEY(0, 4, KEY_RESERVED),
+	KEY(0, 5, KEY_RESERVED),
+
+	KEY(1, 0, KEY_RESERVED),
+	KEY(1, 1, KEY_DOWN),
+	KEY(1, 2, KEY_CAMERA),
+	KEY(1, 3, KEY_RESERVED),
+	KEY(1, 4, KEY_RESERVED),
+	KEY(1, 5, KEY_RESERVED),
+
+	KEY(2, 0, KEY_RESERVED),
+	KEY(2, 1, KEY_KPENTER),
+	KEY(2, 2, KEY_RECORD),
+	KEY(2, 3, KEY_RESERVED),
+	KEY(2, 4, KEY_RESERVED),
+	KEY(2, 5, KEY_SELECT),
+
+	KEY(3, 0, KEY_RESERVED),
+	KEY(3, 1, KEY_UP),
+	KEY(3, 2, KEY_SEND),
+	KEY(3, 3, KEY_RESERVED),
+	KEY(3, 4, KEY_RESERVED),
+	KEY(3, 5, KEY_RESERVED),
+
+	KEY(4, 0, KEY_RESERVED),
+	KEY(4, 1, KEY_LEFT),
+	KEY(4, 2, KEY_PAGEUP),
+	KEY(4, 3, KEY_RESERVED),
+	KEY(4, 4, KEY_RESERVED),
+	KEY(4, 5, KEY_RESERVED),
+};
+
+static struct pxa27x_keypad_platform_data a1200_keypad_platform_data = {
+	.matrix_key_rows = 5,
+	.matrix_key_cols = 6,
+	.matrix_key_map = a1200_key_map,
+	.matrix_key_map_size = ARRAY_SIZE(a1200_key_map),
+
+	.debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_A1200 */
+
+#ifdef CONFIG_MACH_EZX_E6
+static unsigned int e6_key_map[] = {
+	KEY(0, 0, KEY_RESERVED),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_PAGEDOWN),
+	KEY(0, 3, KEY_RESERVED),
+	KEY(0, 4, KEY_RESERVED),
+	KEY(0, 5, KEY_NEXTSONG),
+
+	KEY(1, 0, KEY_RESERVED),
+	KEY(1, 1, KEY_DOWN),
+	KEY(1, 2, KEY_PROG1),
+	KEY(1, 3, KEY_RESERVED),
+	KEY(1, 4, KEY_RESERVED),
+	KEY(1, 5, KEY_RESERVED),
+
+	KEY(2, 0, KEY_RESERVED),
+	KEY(2, 1, KEY_ENTER),
+	KEY(2, 2, KEY_CAMERA),
+	KEY(2, 3, KEY_RESERVED),
+	KEY(2, 4, KEY_RESERVED),
+	KEY(2, 5, KEY_WWW),
+
+	KEY(3, 0, KEY_RESERVED),
+	KEY(3, 1, KEY_UP),
+	KEY(3, 2, KEY_SEND),
+	KEY(3, 3, KEY_RESERVED),
+	KEY(3, 4, KEY_RESERVED),
+	KEY(3, 5, KEY_PLAYPAUSE),
+
+	KEY(4, 0, KEY_RESERVED),
+	KEY(4, 1, KEY_LEFT),
+	KEY(4, 2, KEY_PAGEUP),
+	KEY(4, 3, KEY_RESERVED),
+	KEY(4, 4, KEY_RESERVED),
+	KEY(4, 5, KEY_PREVIOUSSONG),
+};
+
+static struct pxa27x_keypad_platform_data e6_keypad_platform_data = {
+	.matrix_key_rows = 5,
+	.matrix_key_cols = 6,
+	.matrix_key_map = e6_key_map,
+	.matrix_key_map_size = ARRAY_SIZE(e6_key_map),
 
-static void __init ezx_init(void)
+	.debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_E6 */
+
+#ifdef CONFIG_MACH_EZX_A910
+static unsigned int a910_key_map[] = {
+	KEY(0, 0, KEY_NUMERIC_6),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_PAGEDOWN),
+	KEY(0, 3, KEY_KPENTER),
+	KEY(0, 4, KEY_NUMERIC_5),
+	KEY(0, 5, KEY_CAMERA),
+
+	KEY(1, 0, KEY_NUMERIC_8),
+	KEY(1, 1, KEY_DOWN),
+	KEY(1, 2, KEY_RESERVED),
+	KEY(1, 3, KEY_F1), /* Left SoftKey */
+	KEY(1, 4, KEY_NUMERIC_STAR),
+	KEY(1, 5, KEY_RESERVED),
+
+	KEY(2, 0, KEY_NUMERIC_7),
+	KEY(2, 1, KEY_NUMERIC_9),
+	KEY(2, 2, KEY_RECORD),
+	KEY(2, 3, KEY_F2), /* Right SoftKey */
+	KEY(2, 4, KEY_BACK),
+	KEY(2, 5, KEY_SELECT),
+
+	KEY(3, 0, KEY_NUMERIC_2),
+	KEY(3, 1, KEY_UP),
+	KEY(3, 2, KEY_SEND),
+	KEY(3, 3, KEY_NUMERIC_0),
+	KEY(3, 4, KEY_NUMERIC_1),
+	KEY(3, 5, KEY_RECORD),
+
+	KEY(4, 0, KEY_NUMERIC_4),
+	KEY(4, 1, KEY_LEFT),
+	KEY(4, 2, KEY_PAGEUP),
+	KEY(4, 3, KEY_NUMERIC_POUND),
+	KEY(4, 4, KEY_NUMERIC_3),
+	KEY(4, 5, KEY_RESERVED),
+};
+
+static struct pxa27x_keypad_platform_data a910_keypad_platform_data = {
+	.matrix_key_rows = 5,
+	.matrix_key_cols = 6,
+	.matrix_key_map = a910_key_map,
+	.matrix_key_map_size = ARRAY_SIZE(a910_key_map),
+
+	.debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_A910 */
+
+#ifdef CONFIG_MACH_EZX_E2
+static unsigned int e2_key_map[] = {
+	KEY(0, 0, KEY_NUMERIC_6),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_NUMERIC_9),
+	KEY(0, 3, KEY_NEXTSONG),
+	KEY(0, 4, KEY_NUMERIC_5),
+	KEY(0, 5, KEY_F1), /* Left SoftKey */
+
+	KEY(1, 0, KEY_NUMERIC_8),
+	KEY(1, 1, KEY_DOWN),
+	KEY(1, 2, KEY_RESERVED),
+	KEY(1, 3, KEY_PAGEUP),
+	KEY(1, 4, KEY_NUMERIC_STAR),
+	KEY(1, 5, KEY_F2), /* Right SoftKey */
+
+	KEY(2, 0, KEY_NUMERIC_7),
+	KEY(2, 1, KEY_KPENTER),
+	KEY(2, 2, KEY_RECORD),
+	KEY(2, 3, KEY_PAGEDOWN),
+	KEY(2, 4, KEY_BACK),
+	KEY(2, 5, KEY_NUMERIC_0),
+
+	KEY(3, 0, KEY_NUMERIC_2),
+	KEY(3, 1, KEY_UP),
+	KEY(3, 2, KEY_SEND),
+	KEY(3, 3, KEY_PLAYPAUSE),
+	KEY(3, 4, KEY_NUMERIC_1),
+	KEY(3, 5, KEY_SOUND), /* Music SoftKey */
+
+	KEY(4, 0, KEY_NUMERIC_4),
+	KEY(4, 1, KEY_LEFT),
+	KEY(4, 2, KEY_NUMERIC_POUND),
+	KEY(4, 3, KEY_PREVIOUSSONG),
+	KEY(4, 4, KEY_NUMERIC_3),
+	KEY(4, 5, KEY_RESERVED),
+};
+
+static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
+	.matrix_key_rows = 5,
+	.matrix_key_cols = 6,
+	.matrix_key_map = e2_key_map,
+	.matrix_key_map_size = ARRAY_SIZE(e2_key_map),
+
+	.debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_EZX_E2 */
+
+#ifdef CONFIG_MACH_EZX_A780
+static void __init a780_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
+
 	pxa_set_i2c_info(NULL);
-	if (machine_is_ezx_a780() || machine_is_ezx_e680())
-		set_pxa_fb_info(&ezx_fb_info_1);
-	else
-		set_pxa_fb_info(&ezx_fb_info_2);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
+	set_pxa_fb_info(&ezx_fb_info_1);
 
-static void __init ezx_fixup(struct machine_desc *desc, struct tag *tags,
-		char **cmdline, struct meminfo *mi)
-{
-	/* We have two ram chips. First one with 32MB at 0xA0000000 and a second
-	 * 16MB one at 0xAC000000
-	 */
-	mi->nr_banks = 2;
-	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].node = 0;
-	mi->bank[0].size = (32*1024*1024);
-	mi->bank[1].start = 0xac000000;
-	mi->bank[1].node = 1;
-	mi->bank[1].size = (16*1024*1024);
+	pxa_set_keypad_info(&a780_keypad_platform_data);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
-#ifdef CONFIG_MACH_EZX_A780
 MACHINE_START(EZX_A780, "Motorola EZX A780")
 	.phys_io        = 0x40000000,
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.fixup			= ezx_fixup,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
-	.init_machine   = &ezx_init,
+	.init_machine   = a780_init,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_E680
+static struct i2c_board_info __initdata e680_i2c_board_info[] = {
+	{ I2C_BOARD_INFO("tea5767", 0x81) },
+};
+
+static void __init e680_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
+
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
+
+	set_pxa_fb_info(&ezx_fb_info_1);
+
+	pxa_set_keypad_info(&e680_keypad_platform_data);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
 MACHINE_START(EZX_E680, "Motorola EZX E680")
 	.phys_io        = 0x40000000,
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.fixup			= ezx_fixup,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
-	.init_machine   = &ezx_init,
+	.init_machine   = e680_init,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_A1200
+static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
+	{ I2C_BOARD_INFO("tea5767", 0x81) },
+};
+
+static void __init a1200_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
+
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
+
+	set_pxa_fb_info(&ezx_fb_info_2);
+
+	pxa_set_keypad_info(&a1200_keypad_platform_data);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
 MACHINE_START(EZX_A1200, "Motorola EZX A1200")
 	.phys_io        = 0x40000000,
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.fixup			= ezx_fixup,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
-	.init_machine   = &ezx_init,
+	.init_machine   = a1200_init,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_A910
+static void __init a910_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
+
+	pxa_set_i2c_info(NULL);
+
+	set_pxa_fb_info(&ezx_fb_info_2);
+
+	pxa_set_keypad_info(&a910_keypad_platform_data);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
 MACHINE_START(EZX_A910, "Motorola EZX A910")
 	.phys_io        = 0x40000000,
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.fixup			= ezx_fixup,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
-	.init_machine   = &ezx_init,
+	.init_machine   = a910_init,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_E6
+static struct i2c_board_info __initdata e6_i2c_board_info[] = {
+	{ I2C_BOARD_INFO("tea5767", 0x81) },
+};
+
+static void __init e6_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
+
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
+
+	set_pxa_fb_info(&ezx_fb_info_2);
+
+	pxa_set_keypad_info(&e6_keypad_platform_data);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
 MACHINE_START(EZX_E6, "Motorola EZX E6")
 	.phys_io        = 0x40000000,
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.fixup			= ezx_fixup,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
-	.init_machine   = &ezx_init,
+	.init_machine   = e6_init,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_E2
+static struct i2c_board_info __initdata e2_i2c_board_info[] = {
+	{ I2C_BOARD_INFO("tea5767", 0x81) },
+};
+
+static void __init e2_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
+
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
+
+	set_pxa_fb_info(&ezx_fb_info_2);
+
+	pxa_set_keypad_info(&e2_keypad_platform_data);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
 MACHINE_START(EZX_E2, "Motorola EZX E2")
 	.phys_io        = 0x40000000,
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.fixup			= ezx_fixup,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
-	.init_machine   = &ezx_init,
+	.init_machine   = e2_init,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 85ed0b3..0ccc91c 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -24,6 +24,7 @@
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
+#include <asm/mach-types.h>
 
 #include <mach/pxa-regs.h>
 #include <mach/reset.h>
@@ -39,6 +40,21 @@ void clear_reset_status(unsigned int mask)
 		pxa3xx_clear_reset_status(mask);
 }
 
+unsigned long get_clock_tick_rate(void)
+{
+	unsigned long clock_tick_rate;
+
+	if (cpu_is_pxa25x())
+		clock_tick_rate = 3686400;
+	else if (machine_is_mainstone())
+		clock_tick_rate = 3249600;
+	else
+		clock_tick_rate = 3250000;
+
+	return clock_tick_rate;
+}
+EXPORT_SYMBOL(get_clock_tick_rate);
+
 /*
  * Get the clock frequency as reflected by CCCR and the turbo flag.
  * We assume these values have been applied via a fcs.
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 14930cf..5fec1e4 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -25,6 +25,18 @@
 
 #include "generic.h"
 
+#define GPIO0_BASE	((void __iomem *)io_p2v(0x40E00000))
+#define GPIO1_BASE	((void __iomem *)io_p2v(0x40E00004))
+#define GPIO2_BASE	((void __iomem *)io_p2v(0x40E00008))
+#define GPIO3_BASE	((void __iomem *)io_p2v(0x40E00100))
+
+#define GPLR_OFFSET	0x00
+#define GPDR_OFFSET	0x0C
+#define GPSR_OFFSET	0x18
+#define GPCR_OFFSET	0x24
+#define GRER_OFFSET	0x30
+#define GFER_OFFSET	0x3C
+#define GEDR_OFFSET	0x48
 
 struct pxa_gpio_chip {
 	struct gpio_chip chip;
@@ -33,6 +45,18 @@ struct pxa_gpio_chip {
 
 int pxa_last_gpio;
 
+#ifdef CONFIG_CPU_PXA26x
+/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
+ * as well as their Alternate Function value being '1' for GPIO in GAFRx.
+ */
+static int __gpio_is_inverted(unsigned gpio)
+{
+	return cpu_is_pxa25x() && gpio > 85;
+}
+#else
+#define __gpio_is_inverted(gpio)	(0)
+#endif
+
 /*
  * Configure pins for GPIO or other functions
  */
@@ -75,7 +99,10 @@ static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 	gpdr = pxa->regbase + GPDR_OFFSET;
 	local_irq_save(flags);
 	value = __raw_readl(gpdr);
-	value &= ~mask;
+	if (__gpio_is_inverted(chip->base + offset))
+		value |= mask;
+	else
+		value &= ~mask;
 	__raw_writel(value, gpdr);
 	local_irq_restore(flags);
 
@@ -97,7 +124,10 @@ static int pxa_gpio_direction_output(struct gpio_chip *chip,
 	gpdr = pxa->regbase + GPDR_OFFSET;
 	local_irq_save(flags);
 	tmp = __raw_readl(gpdr);
-	tmp |= mask;
+	if (__gpio_is_inverted(chip->base + offset))
+		tmp &= ~mask;
+	else
+		tmp |= mask;
 	__raw_writel(tmp, gpdr);
 	local_irq_restore(flags);
 
@@ -173,10 +203,17 @@ static unsigned long GPIO_IRQ_mask[4];
  */
 static int __gpio_is_occupied(unsigned gpio)
 {
-	if (cpu_is_pxa25x() || cpu_is_pxa27x())
-		return GAFR(gpio) & (0x3 << (((gpio) & 0xf) * 2));
-	else
-		return 0;
+	if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
+		int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
+		int dir = GPDR(gpio) & GPIO_bit(gpio);
+
+		if (__gpio_is_inverted(gpio))
+			return af != 1 || dir == 0;
+		else
+			return af != 0 || dir != 0;
+	}
+
+	return 0;
 }
 
 static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
@@ -190,9 +227,8 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
 		/* Don't mess with enabled GPIOs using preconfigured edges or
 		 * GPIOs set to alternate function or to output during probe
 		 */
-		if ((GPIO_IRQ_rising_edge[idx] |
-		     GPIO_IRQ_falling_edge[idx] |
-		     GPDR(gpio)) & GPIO_bit(gpio))
+		if ((GPIO_IRQ_rising_edge[idx] & GPIO_bit(gpio)) ||
+		    (GPIO_IRQ_falling_edge[idx] & GPIO_bit(gpio)))
 			return 0;
 
 		if (__gpio_is_occupied(gpio))
@@ -201,7 +237,10 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
 		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	}
 
-	GPDR(gpio) &= ~GPIO_bit(gpio);
+	if (__gpio_is_inverted(gpio))
+		GPDR(gpio) |= GPIO_bit(gpio);
+	else
+		GPDR(gpio) &= ~GPIO_bit(gpio);
 
 	if (type & IRQ_TYPE_EDGE_RISING)
 		__set_bit(gpio, GPIO_IRQ_rising_edge);
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index d8962a0..e296ce1 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -184,15 +184,22 @@ static unsigned long gumstix_pin_config[] __initdata = {
 	GPIO6_MMC_CLK,
 	GPIO53_MMC_CLK,
 	GPIO8_MMC_CS0,
-	/* these are used by AM200EPD */
-	GPIO51_GPIO,
-	GPIO49_GPIO,
-	GPIO48_GPIO,
-	GPIO32_GPIO,
-	GPIO17_GPIO,
-	GPIO16_GPIO,
 };
 
+int __attribute__((weak)) am200_init(void)
+{
+	return 0;
+}
+
+static void __init carrier_board_init(void)
+{
+	/*
+	 * put carrier/expansion board init here if
+	 * they cannot be detected programatically
+	 */
+	am200_init();
+}
+
 static void __init gumstix_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gumstix_pin_config));
@@ -201,6 +208,7 @@ static void __init gumstix_init(void)
 	gumstix_udc_init();
 	gumstix_mmc_init();
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
+	carrier_board_init();
 }
 
 MACHINE_START(GUMSTIX, "Gumstix")
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
new file mode 100644
index 0000000..da6e442
--- /dev/null
+++ b/arch/arm/mach-pxa/h5000.c
@@ -0,0 +1,200 @@
+/*
+ * Hardware definitions for HP iPAQ h5xxx Handheld Computers
+ *
+ * Copyright 2000-2003  Hewlett-Packard Company.
+ * Copyright 2002       Jamey Hicks <jamey.hicks@hp.com>
+ * Copyright 2004-2005  Phil Blundell <pb@handhelds.org>
+ * Copyright 2007-2008  Anton Vorontsov <cbouatmailru@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/h5000.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/udc.h>
+#include "generic.h"
+
+/*
+ * Flash
+ */
+
+static struct mtd_partition h5000_flash0_partitions[] = {
+	{
+		.name = "bootldr",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_WRITEABLE,
+	},
+	{
+		.name = "root",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	},
+};
+
+static struct mtd_partition h5000_flash1_partitions[] = {
+	{
+		.name = "second root",
+		.size = SZ_16M - 0x00040000,
+		.offset = 0,
+	},
+	{
+		.name = "asset",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+		.mask_flags = MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data h5000_flash0_data = {
+	.width = 4,
+	.parts = h5000_flash0_partitions,
+	.nr_parts = ARRAY_SIZE(h5000_flash0_partitions),
+};
+
+static struct physmap_flash_data h5000_flash1_data = {
+	.width = 4,
+	.parts = h5000_flash1_partitions,
+	.nr_parts = ARRAY_SIZE(h5000_flash1_partitions),
+};
+
+static struct resource h5000_flash0_resources = {
+	.start = PXA_CS0_PHYS,
+	.end = PXA_CS0_PHYS + SZ_32M - 1,
+	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+};
+
+static struct resource h5000_flash1_resources = {
+	.start = PXA_CS0_PHYS + SZ_32M,
+	.end = PXA_CS0_PHYS + SZ_32M + SZ_16M - 1,
+	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+};
+
+static struct platform_device h5000_flash[] = {
+	{
+		.name = "physmap-flash",
+		.id = 0,
+		.resource = &h5000_flash0_resources,
+		.num_resources = 1,
+		.dev = {
+			.platform_data = &h5000_flash0_data,
+		},
+	},
+	{
+		.name = "physmap-flash",
+		.id = 1,
+		.resource = &h5000_flash1_resources,
+		.num_resources = 1,
+		.dev = {
+			.platform_data = &h5000_flash1_data,
+		},
+	},
+};
+
+/*
+ * USB Device Controller
+ */
+
+static struct pxa2xx_udc_mach_info h5000_udc_mach_info __initdata = {
+	.gpio_pullup = H5000_GPIO_USB_PULLUP,
+};
+
+/*
+ * GPIO setup
+ */
+
+static unsigned long h5000_pin_config[] __initdata = {
+	/* Crystal and Clock Signals */
+	GPIO12_32KHz,
+
+	/* SDRAM and Static Memory I/O Signals */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+
+	/* FFUART */
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+	GPIO36_FFUART_DCD,
+	GPIO37_FFUART_DSR,
+	GPIO38_FFUART_RI,
+	GPIO39_FFUART_TXD,
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+};
+
+/*
+ * Localbus setup:
+ * CS0: Flash;
+ * CS1: MediaQ chip, select 16-bit bus and vlio;
+ * CS5: SAMCOP.
+ */
+
+static void fix_msc(void)
+{
+	MSC0 = 0x129c24f2;
+	MSC1 = 0x7ff424fa;
+	MSC2 = 0x7ff47ff4;
+
+	MDREFR |= 0x02080000;
+}
+
+/*
+ * Platform devices
+ */
+
+static struct platform_device *devices[] __initdata = {
+	&h5000_flash[0],
+	&h5000_flash[1],
+};
+
+static void __init h5000_init(void)
+{
+	fix_msc();
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
+	pxa_set_udc_info(&h5000_udc_mach_info);
+	platform_add_devices(ARRAY_AND_SIZE(devices));
+}
+
+MACHINE_START(H5400, "HP iPAQ H5000")
+	.phys_io = 0x40000000,
+	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params = 0xa0000100,
+	.map_io = pxa_map_io,
+	.init_irq = pxa25x_init_irq,
+	.timer = &pxa_timer,
+	.init_machine = h5000_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
new file mode 100644
index 0000000..364c5e2
--- /dev/null
+++ b/arch/arm/mach-pxa/imote2.c
@@ -0,0 +1,575 @@
+/*
+ * linux/arch/arm/mach-pxa/imote2.c
+ *
+ * Author:	Ed C. Epp
+ * Created:	Nov 05, 2002
+ * Copyright:	Intel Corp.
+ *
+ * Modified 2008:  Jonathan Cameron
+ *
+ * The Imote2 is a wireless sensor node platform sold
+ * by Crossbow (www.xbow.com).
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/mfd/da903x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/i2c.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/regs-ssp.h>
+#include <mach/udc.h>
+#include <mach/mmc.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/pxa27x-udc.h>
+
+#include "devices.h"
+#include "generic.h"
+
+static unsigned long imote2_pin_config[] __initdata = {
+
+	/* Device Identification for wakeup*/
+	GPIO102_GPIO,
+
+	/* Button */
+	GPIO91_GPIO,
+
+	/* DA9030 */
+	GPIO1_GPIO,
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	/* 802.15.4 radio - driver out of mainline */
+	GPIO22_GPIO,			/* CC_RSTN */
+	GPIO114_GPIO,			/* CC_FIFO */
+	GPIO116_GPIO,			/* CC_CCA */
+	GPIO0_GPIO,			/* CC_FIFOP */
+	GPIO16_GPIO,			/* CCSFD */
+	GPIO39_GPIO,			/* CSn */
+	GPIO115_GPIO,			/* Power enable */
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* SSP 3 - 802.15.4 radio */
+	GPIO39_GPIO, 			/* Chip Select */
+	GPIO34_SSP3_SCLK,
+	GPIO35_SSP3_TXD,
+	GPIO41_SSP3_RXD,
+
+	/* SSP 2 - to daughter boards */
+	GPIO37_GPIO,			/* Chip Select */
+	GPIO36_SSP2_SCLK,
+	GPIO38_SSP2_TXD,
+	GPIO11_SSP2_RXD,
+
+	/* SSP 1 - to daughter boards */
+	GPIO24_GPIO,			/* Chip Select */
+	GPIO23_SSP1_SCLK,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+
+	/* BTUART Basic Connector*/
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART Serial console via debug board*/
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* Basic sensor board */
+	GPIO96_GPIO,	/* accelerometer interrupt */
+	GPIO99_GPIO,	/* ADC interrupt */
+
+	/* Connector pins specified as gpios */
+	GPIO94_GPIO, /* large basic connector pin 14 */
+	GPIO10_GPIO, /* large basic connector pin 23 */
+
+	/* LEDS */
+	GPIO103_GPIO, /* red led */
+	GPIO104_GPIO, /* green led */
+	GPIO105_GPIO, /* blue led */
+};
+
+static struct gpio_led imote2_led_pins[] = {
+	{
+		.name       =  "imote2:red",
+		.gpio       = 103,
+		.active_low = 1,
+	}, {
+		.name       = "imote2:green",
+		.gpio       = 104,
+		.active_low = 1,
+	}, {
+		.name       = "imote2:blue",
+		.gpio       = 105,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data imote2_led_data = {
+	.num_leds = ARRAY_SIZE(imote2_led_pins),
+	.leds     = imote2_led_pins,
+};
+
+static struct platform_device imote2_leds = {
+	.name = "leds-gpio",
+	.id   = -1,
+	.dev = {
+		.platform_data = &imote2_led_data,
+	},
+};
+
+/* Reverse engineered partly from Platformx drivers */
+enum imote2_ldos{
+	vcc_vref,
+	vcc_cc2420,
+	vcc_mica,
+	vcc_bt,
+	/* The two voltages available to sensor boards */
+	vcc_sensor_1_8,
+	vcc_sensor_3,
+
+	vcc_sram_ext, /* directly connected to the pxa271 */
+	vcc_pxa_pll,
+	vcc_pxa_usim, /* Reference voltage for certain gpios */
+	vcc_pxa_mem,
+	vcc_pxa_flash,
+	vcc_pxa_core, /*Dc-Dc buck not yet supported */
+	vcc_lcd,
+	vcc_bb,
+	vcc_bbio,
+	vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
+};
+
+/* The values of the various regulator constraints are obviously dependent
+ * on exactly what is wired to each ldo.  Unfortunately this information is
+ * not generally available.  More information has been requested from Xbow
+ * but as of yet they haven't been forthcoming.
+ *
+ * Some of these are clearly Stargate 2 related (no way of plugging
+ * in an lcd on the IM2 for example!).
+ */
+static struct regulator_init_data imote2_ldo_init_data[] = {
+	[vcc_bbio] = {
+		.constraints = { /* board default 1.8V */
+			.name = "vcc_bbio",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+	[vcc_bb] = {
+		.constraints = { /* board default 2.8V */
+			.name = "vcc_bb",
+			.min_uV = 2700000,
+			.max_uV = 3000000,
+		},
+	},
+	[vcc_pxa_flash] = {
+		.constraints = {/* default is 1.8V */
+			.name = "vcc_pxa_flash",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+	[vcc_cc2420] = { /* also vcc_io */
+		.constraints = {
+			/* board default is 2.8V */
+			.name = "vcc_cc2420",
+			.min_uV = 2700000,
+			.max_uV = 3300000,
+		},
+	},
+	[vcc_vref] = { /* Reference for what? */
+		.constraints = { /* default 1.8V */
+			.name = "vcc_vref",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+	[vcc_sram_ext] = {
+		.constraints = { /* default 2.8V */
+			.name = "vcc_sram_ext",
+			.min_uV = 2800000,
+			.max_uV = 2800000,
+		},
+	},
+	[vcc_mica] = {
+		.constraints = { /* default 2.8V */
+			.name = "vcc_mica",
+			.min_uV = 2800000,
+			.max_uV = 2800000,
+		},
+	},
+	[vcc_bt] = {
+		.constraints = { /* default 2.8V */
+			.name = "vcc_bt",
+			.min_uV = 2800000,
+			.max_uV = 2800000,
+		},
+	},
+	[vcc_lcd] = {
+		.constraints = { /* default 2.8V */
+			.name = "vcc_lcd",
+			.min_uV = 2700000,
+			.max_uV = 3300000,
+		},
+	},
+	[vcc_io] = { /* Same or higher than everything
+			  * bar vccbat and vccusb */
+		.constraints = { /* default 2.8V */
+			.name = "vcc_io",
+			.min_uV = 2692000,
+			.max_uV = 3300000,
+		},
+	},
+	[vcc_sensor_1_8] = {
+		.constraints = { /* default 1.8V */
+			.name = "vcc_sensor_1_8",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+	[vcc_sensor_3] = { /* curiously default 2.8V */
+		.constraints = {
+			.name = "vcc_sensor_3",
+			.min_uV = 2800000,
+			.max_uV = 3000000,
+		},
+	},
+	[vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
+		.constraints = {
+			.name = "vcc_pxa_pll",
+			.min_uV = 1170000,
+			.max_uV = 1430000,
+		},
+	},
+	[vcc_pxa_usim] = {
+		.constraints = { /* default 1.8V */
+			.name = "vcc_pxa_usim",
+			.min_uV = 1710000,
+			.max_uV = 2160000,
+		},
+	},
+	[vcc_pxa_mem] = {
+		.constraints = { /* default 1.8V */
+			.name = "vcc_pxa_mem",
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+		},
+	},
+};
+
+static struct da903x_subdev_info imote2_da9030_subdevs[] = {
+	{
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO2,
+		.platform_data = &imote2_ldo_init_data[vcc_bbio],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO3,
+		.platform_data = &imote2_ldo_init_data[vcc_bb],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO4,
+		.platform_data = &imote2_ldo_init_data[vcc_pxa_flash],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO5,
+		.platform_data = &imote2_ldo_init_data[vcc_cc2420],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO6,
+		.platform_data = &imote2_ldo_init_data[vcc_vref],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO7,
+		.platform_data = &imote2_ldo_init_data[vcc_sram_ext],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO8,
+		.platform_data = &imote2_ldo_init_data[vcc_mica],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO9,
+		.platform_data = &imote2_ldo_init_data[vcc_bt],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO10,
+		.platform_data = &imote2_ldo_init_data[vcc_sensor_1_8],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO11,
+		.platform_data = &imote2_ldo_init_data[vcc_sensor_3],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO12,
+		.platform_data = &imote2_ldo_init_data[vcc_lcd],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO15,
+		.platform_data = &imote2_ldo_init_data[vcc_pxa_pll],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO17,
+		.platform_data = &imote2_ldo_init_data[vcc_pxa_usim],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO18,
+		.platform_data = &imote2_ldo_init_data[vcc_io],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO19,
+		.platform_data = &imote2_ldo_init_data[vcc_pxa_mem],
+	},
+};
+
+static struct da903x_platform_data imote2_da9030_pdata = {
+	.num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs),
+	.subdevs = imote2_da9030_subdevs,
+};
+
+/* As the the imote2 doesn't currently have a conventional SD slot
+ * there is no option to hotplug cards, making all this rather simple
+ */
+static int imote2_mci_get_ro(struct device *dev)
+{
+	return 0;
+}
+
+/* Rather simple case as hotplugging not possible */
+static struct pxamci_platform_data imote2_mci_platform_data = {
+	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
+	.get_ro = imote2_mci_get_ro,
+};
+
+static struct mtd_partition imote2flash_partitions[] = {
+	{
+		.name = "Bootloader",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name = "Kernel",
+		.size = 0x00200000,
+		.offset = 0x00040000,
+		.mask_flags = 0,
+	}, {
+		.name = "Filesystem",
+		.size = 0x01DC0000,
+		.offset = 0x00240000,
+		.mask_flags = 0,
+	},
+};
+
+static struct resource flash_resources = {
+	.start = PXA_CS0_PHYS,
+	.end = PXA_CS0_PHYS + SZ_32M - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct flash_platform_data imote2_flash_data = {
+	.map_name = "cfi_probe",
+	.parts = imote2flash_partitions,
+	.nr_parts = ARRAY_SIZE(imote2flash_partitions),
+	.name = "PXA27xOnChipROM",
+	.width = 2,
+};
+
+static struct platform_device imote2_flash_device = {
+	.name = "pxa2xx-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &imote2_flash_data,
+	},
+	.resource = &flash_resources,
+	.num_resources = 1,
+};
+
+/* Some of the drivers here are out of kernel at the moment (parts of IIO)
+ * and it may be a while before they are in the mainline.
+ */
+static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
+	{ /* UCAM sensor board */
+		.type = "max1238",
+		.addr = 0x35,
+	}, { /* ITS400 Sensor board only */
+		.type = "max1363",
+		.addr = 0x34,
+		/* Through a nand gate - Also beware, on V2 sensor board the
+		 * pull up resistors are missing.
+		 */
+		.irq = IRQ_GPIO(99),
+	}, { /* ITS400 Sensor board only */
+		.type = "tsl2561",
+		.addr = 0x49,
+		/* Through a nand gate - Also beware, on V2 sensor board the
+		 * pull up resistors are missing.
+		 */
+		.irq = IRQ_GPIO(99),
+	}, { /* ITS400 Sensor board only */
+		.type = "tmp175",
+		.addr = 0x4A,
+		.irq = IRQ_GPIO(96),
+	},
+};
+
+static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
+	{
+		.type = "da9030",
+		.addr = 0x49,
+		.platform_data = &imote2_da9030_pdata,
+		.irq = gpio_to_irq(1),
+	},
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
+	.num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
+	.num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
+	.num_chipselect = 1,
+};
+
+/* Patch posted by Eric Miao <eric.miao@marvell.com> will remove
+ * the need for these functions.
+ */
+static void spi1control(u32 command)
+{
+	gpio_set_value(24, command & PXA2XX_CS_ASSERT ? 0 : 1);
+};
+
+static void spi3control(u32 command)
+{
+	gpio_set_value(39, command & PXA2XX_CS_ASSERT ? 0 : 1);
+};
+
+static struct pxa2xx_spi_chip staccel_chip_info = {
+	.tx_threshold = 8,
+	.rx_threshold = 8,
+	.dma_burst_size = 8,
+	.timeout = 235,
+	.cs_control = spi1control,
+};
+
+static struct pxa2xx_spi_chip cc2420_info = {
+	.tx_threshold = 8,
+	.rx_threshold = 8,
+	.dma_burst_size = 8,
+	.timeout = 235,
+	.cs_control = spi3control,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+	{ /* Driver in IIO */
+		.modalias = "lis3l02dq",
+		.max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
+		.bus_num = 1,
+		.chip_select = 0,
+		.controller_data = &staccel_chip_info,
+		.irq = IRQ_GPIO(96),
+	}, { /* Driver out of kernel as it needs considerable rewriting */
+		.modalias = "cc2420",
+		.max_speed_hz = 6500000,
+		.bus_num = 3,
+		.chip_select = 0,
+		.controller_data = &cc2420_info,
+	},
+};
+
+static void im2_udc_command(int cmd)
+{
+	switch (cmd) {
+	case PXA2XX_UDC_CMD_CONNECT:
+		UP2OCR |=  UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE;
+		break;
+	case PXA2XX_UDC_CMD_DISCONNECT:
+		UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE);
+		break;
+	}
+}
+
+static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
+	.udc_command		= im2_udc_command,
+};
+
+static struct platform_device *imote2_devices[] = {
+	&imote2_flash_device,
+	&imote2_leds,
+};
+
+static struct i2c_pxa_platform_data i2c_pwr_pdata = {
+	.fast_mode = 1,
+};
+
+static struct i2c_pxa_platform_data i2c_pdata = {
+	.fast_mode = 1,
+};
+
+static void __init imote2_init(void)
+{
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
+	/* SPI chip select directions - all other directions should
+	 * be handled by drivers.*/
+	gpio_direction_output(37, 0);
+	gpio_direction_output(24, 0);
+	gpio_direction_output(39, 0);
+
+	platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
+
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
+	pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
+	pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
+
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+	i2c_register_board_info(0, imote2_i2c_board_info,
+				ARRAY_SIZE(imote2_i2c_board_info));
+	i2c_register_board_info(1, imote2_pwr_i2c_board_info,
+				ARRAY_SIZE(imote2_pwr_i2c_board_info));
+
+	pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
+	pxa_set_i2c_info(&i2c_pdata);
+
+	pxa_set_mci_info(&imote2_mci_platform_data);
+	pxa_set_udc_info(&imote2_udc_info);
+}
+
+MACHINE_START(INTELMOTE2, "IMOTE 2")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= imote2_init,
+	.boot_params	= 0xA0000100,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/clkdev.h b/arch/arm/mach-pxa/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
index 955bfe6..7804637 100644
--- a/arch/arm/mach-pxa/include/mach/dma.h
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -30,10 +30,6 @@ typedef enum {
 	DMA_PRIO_LOW = 2
 } pxa_dma_prio;
 
-#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-#define HAVE_ARCH_PCI_SET_DMA_MASK	1
-#endif
-
 /*
  * DMA registration
  */
diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
index 4c90b13..efbd2aa 100644
--- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
@@ -43,8 +43,10 @@
 #define GPIO_E800_PCMCIA_PWR1    73
 
 /* e7xx IrDA power control */
-#define GPIO_E7XX_IR_ON          38
+#define GPIO_E7XX_IR_OFF         38
 
 /* ASIC related GPIOs */
 #define GPIO_ESERIES_TMIO_IRQ        5
+#define GPIO_ESERIES_TMIO_PCLR      19
+#define GPIO_ESERIES_TMIO_SUSPEND   45
 #define GPIO_E800_ANGELX_IRQ      8
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
index 42ee195..099f54a 100644
--- a/arch/arm/mach-pxa/include/mach/gumstix.h
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -94,3 +94,7 @@ has detected a cable insertion; driven low otherwise. */
 #define GPIO26_PRDY_nBSY_MD		(GPIO26_PRDY_nBSY | GPIO_IN)
 #define GPIO27_PRDY_nBSY_MD		(GPIO27_PRDY_nBSY | GPIO_IN)
 #define GPIO36_nCD_MD			(GPIO36_nCD | GPIO_IN)
+
+/* for expansion boards that can't be programatically detected */
+extern int am200_init(void);
+
diff --git a/arch/arm/mach-pxa/include/mach/h5000.h b/arch/arm/mach-pxa/include/mach/h5000.h
new file mode 100644
index 0000000..2a5ae38
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/h5000.h
@@ -0,0 +1,113 @@
+/*
+ * Hardware definitions for HP iPAQ h5xxx Handheld Computers
+ *
+ * Copyright(20)02 Hewlett-Packard Company.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks
+ */
+
+#ifndef __ASM_ARCH_H5000_H
+#define __ASM_ARCH_H5000_H
+
+#include <mach/mfp-pxa25x.h>
+
+/*
+ * CPU GPIOs
+ */
+
+#define H5000_GPIO_POWER_BUTTON   (0)
+#define H5000_GPIO_RESET_BUTTON_N (1)
+#define H5000_GPIO_OPT_INT        (2)
+#define H5000_GPIO_BACKUP_POWER   (3)
+#define H5000_GPIO_ACTION_BUTTON  (4)
+#define H5000_GPIO_COM_DCD_SOMETHING  (5) /* what is this really ? */
+/* 6 not connected */
+#define H5000_GPIO_RESET_BUTTON_AGAIN_N (7) /* connected to gpio 1 as well */
+/* 8 not connected */
+#define H5000_GPIO_RSO_N          (9)       /* reset output from max1702 which regulates 3.3 and 2.5 */
+#define H5000_GPIO_ASIC_INT_N   (10)       /* from companion asic */
+#define H5000_GPIO_BT_ENV_0     (11)       /* to LMX9814, set to 1 according to regdump */
+/*(12) not connected */
+#define H5000_GPIO_BT_ENV_1     (13)       /* to LMX9814, set to 1 according to regdump */
+#define H5000_GPIO_BT_WU        (14)       /* from LMX9814, Defined as HOST_WAKEUP in the LMX9820 data sheet */
+/*(15) is CS1# */
+/*(16) not connected */
+/*(17) not connected */
+/*(18) is pcmcia ready */
+/*(19) is dreq1 */
+/*(20) is dreq0 */
+#define H5000_GPIO_OE_RD_NWR	(21)       /* output enable on rd/nwr signal to companion asic */
+/*(22) is not connected */
+#define H5000_GPIO_OPT_SPI_CLK  (23)       /* to extension pack */
+#define H5000_GPIO_OPT_SPI_CS_N (24)       /* to extension pack */
+#define H5000_GPIO_OPT_SPI_DOUT (25)       /* to extension pack */
+#define H5000_GPIO_OPT_SPI_DIN  (26)       /* to extension pack */
+/*(27) not connected */
+#define H5000_GPIO_I2S_BITCLK   (28)       /* connected to AC97 codec */
+#define H5000_GPIO_I2S_DATAOUT  (29)       /* connected to AC97 codec */
+#define H5000_GPIO_I2S_DATAIN   (30)       /* connected to AC97 codec */
+#define H5000_GPIO_I2S_LRCLK    (31)       /* connected to AC97 codec */
+#define H5000_GPIO_I2S_SYSCLK   (32)       /* connected to AC97 codec */
+/*(33) is CS5# */
+#define H5000_GPIO_COM_RXD      (34)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_CTS      (35)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DCD      (36)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DSR      (37)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_RI       (38)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_TXD      (39)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DTR      (40)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_RTS      (41)       /* connected to cradle/cable connector */
+
+#define H5000_GPIO_BT_RXD       (42)       /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_TXD       (43)       /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_CTS       (44)       /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_RTS       (45)       /* connected to BT (LMX9814) */
+
+#define H5000_GPIO_IRDA_RXD     (46)
+#define H5000_GPIO_IRDA_TXD     (47)
+
+#define H5000_GPIO_POE_N        (48)       /* used for pcmcia */
+#define H5000_GPIO_PWE_N        (49)       /* used for pcmcia */
+#define H5000_GPIO_PIOR_N       (50)       /* used for pcmcia */
+#define H5000_GPIO_PIOW_N       (51)       /* used for pcmcia */
+#define H5000_GPIO_PCE1_N       (52)       /* used for pcmcia */
+#define H5000_GPIO_PCE2_N       (53)       /* used for pcmcia */
+#define H5000_GPIO_PSKTSEL      (54)       /* used for pcmcia */
+#define H5000_GPIO_PREG_N       (55)       /* used for pcmcia */
+#define H5000_GPIO_PWAIT_N      (56)       /* used for pcmcia */
+#define H5000_GPIO_IOIS16_N     (57)       /* used for pcmcia */
+
+#define H5000_GPIO_IRDA_SD      (58)       /* to hsdl3002 sd */
+/*(59) not connected */
+#define H5000_GPIO_POWER_SD_N   (60)       /* controls power to SD */
+#define H5000_GPIO_POWER_RS232_N	(61)       /* inverted FORCEON to rs232 transceiver */
+#define H5000_GPIO_POWER_ACCEL_N	(62)       /* controls power to accel */
+/*(63) is not connected */
+#define H5000_GPIO_OPT_NVRAM    (64)       /* controls power to expansion pack */
+#define H5000_GPIO_CHG_EN       (65)       /* to sc801 en */
+#define H5000_GPIO_USB_PULLUP   (66)       /* USB d+ pullup via 1.5K resistor */
+#define H5000_GPIO_BT_2V8_N     (67)       /* 2.8V used by bluetooth */
+#define H5000_GPIO_EXT_CHG_RATE (68)       /* enables external charging rate */
+/*(69) is not connected */
+#define H5000_GPIO_CIR_RESET    (70)       /* consumer IR reset */
+#define H5000_GPIO_POWER_LIGHT_SENSOR_N	(71)
+#define H5000_GPIO_BT_M_RESET   (72)
+#define H5000_GPIO_STD_CHG_RATE (73)
+#define H5000_GPIO_SD_WP_N      (74)
+#define H5000_GPIO_MOTOR_ON_N   (75)       /* external pullup on this */
+#define H5000_GPIO_HEADPHONE_DETECT	(76)
+#define H5000_GPIO_USB_CHG_RATE (77)       /* select rate for charging via usb */
+/*(78) is CS2# */
+/*(79) is CS3# */
+/*(80) is CS4# */
+
+#endif /* __ASM_ARCH_H5000_H */
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index a582a6d..16ab795 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -102,6 +102,9 @@
  *  PXA930	B0	0x69056835	0x5E643013
  *  PXA930	B1	0x69056837	0x7E643013
  *  PXA930	B2	0x69056838	0x8E643013
+ *
+ *  PXA935	A0	0x56056931	0x1E653013
+ *  PXA935	B0	0x56056936	0x6E653013
  */
 #ifdef CONFIG_PXA25x
 #define __cpu_is_pxa210(id)				\
@@ -178,12 +181,22 @@
 #define __cpu_is_pxa930(id)				\
 	({						\
 		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x683;		\
+		_id == 0x683;				\
 	 })
 #else
 #define __cpu_is_pxa930(id)	(0)
 #endif
 
+#ifdef CONFIG_CPU_PXA935
+#define __cpu_is_pxa935(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x693;				\
+	 })
+#else
+#define __cpu_is_pxa935(id)	(0)
+#endif
+
 #define cpu_is_pxa210()					\
 	({						\
 		__cpu_is_pxa210(read_cpuid_id());	\
@@ -204,8 +217,6 @@
 		__cpu_is_pxa25x(read_cpuid_id());	\
 	})
 
-extern int cpu_is_pxa26x(void);
-
 #define cpu_is_pxa27x()					\
 	({						\
 		__cpu_is_pxa27x(read_cpuid_id());	\
@@ -232,6 +243,12 @@ extern int cpu_is_pxa26x(void);
 		__cpu_is_pxa930(id);			\
 	 })
 
+#define cpu_is_pxa935()					\
+	({						\
+		unsigned int id = read_cpuid(CPUID_ID);	\
+		__cpu_is_pxa935(id);			\
+	 })
+
 /*
  * CPUID Core Generation Bit
  * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
@@ -249,6 +266,12 @@ extern int cpu_is_pxa26x(void);
 		_id == 0x3;				\
 	 })
 
+#define __cpu_is_pxa9xx(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x683 || _id == 0x693;		\
+	 })
+
 #define cpu_is_pxa2xx()					\
 	({						\
 		__cpu_is_pxa2xx(read_cpuid_id());	\
@@ -259,32 +282,25 @@ extern int cpu_is_pxa26x(void);
 		__cpu_is_pxa3xx(read_cpuid_id());	\
 	 })
 
-/*
- * Handy routine to set GPIO alternate functions
- */
-extern int pxa_gpio_mode( int gpio_mode );
-
-/*
- * Return GPIO level, nonzero means high, zero is low
- */
-extern int pxa_gpio_get_value(unsigned gpio);
-
-/*
- * Set output GPIO level
- */
-extern void pxa_gpio_set_value(unsigned gpio, int value);
-
+#define cpu_is_pxa9xx()					\
+	({						\
+		__cpu_is_pxa9xx(read_cpuid_id());	\
+	 })
 /*
  * return current memory and LCD clock frequency in units of 10kHz
  */
 extern unsigned int get_memclk_frequency_10khz(void);
 
+/* return the clock tick rate of the OS timer */
+extern unsigned long get_clock_tick_rate(void);
 #endif
 
 #if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
 #define PCIBIOS_MIN_IO		0
 #define PCIBIOS_MIN_MEM		0
 #define pcibios_assign_all_busses()	1
+#define HAVE_ARCH_PCI_SET_DMA_MASK	1
 #endif
 
+
 #endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h
index 600fd4f..262691f 100644
--- a/arch/arm/mach-pxa/include/mach/io.h
+++ b/arch/arm/mach-pxa/include/mach/io.h
@@ -6,15 +6,13 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <mach/hardware.h>
-
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
  * We don't actually have real ISA nor PCI buses, but there is so many
  * drivers out there that might just work if we fake them...
  */
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
index 5c4e320..6c9b21c 100644
--- a/arch/arm/mach-pxa/include/mach/littleton.h
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -1,8 +1,13 @@
-#ifndef __ASM_ARCH_ZYLONITE_H
-#define __ASM_ARCH_ZYLONITE_H
+#ifndef __ASM_ARCH_LITTLETON_H
+#define __ASM_ARCH_LITTLETON_H
+
+#include <mach/gpio.h>
 
 #define LITTLETON_ETH_PHYS	0x30000000
 
 #define LITTLETON_GPIO_LCD_CS	(17)
 
-#endif /* __ASM_ARCH_ZYLONITE_H */
+#define EXT0_GPIO_BASE	(NR_BUILTIN_GPIO)
+#define EXT0_GPIO(x)	(EXT0_GPIO_BASE + (x))
+
+#endif /* __ASM_ARCH_LITTLETON_H */
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
index 59aef89..f626730 100644
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -18,16 +18,6 @@
 #define PHYS_OFFSET	UL(0xa0000000)
 
 /*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	 __virt_to_phys(x)
-#define __bus_to_virt(x)	 __phys_to_virt(x)
-
-/*
  * The nodes are matched with the physical SDRAM banks as follows:
  *
  * 	node 0:  0xa0000000-0xa3ffffff	-->  0xc0000000-0xc3ffffff
@@ -47,6 +37,7 @@ void cmx2xx_pci_adjust_zones(int node, unsigned long *size,
 	cmx2xx_pci_adjust_zones(node, size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_64M - 1)
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
 #endif
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index 617cab2..a72869b 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -158,4 +158,35 @@
 #define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
 #define GPIO77_LCD_BIAS		MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
 
+#ifdef CONFIG_CPU_PXA26x
+/* GPIO */
+#define GPIO85_GPIO		MFP_CFG_IN(GPIO85, AF0)
+#define GPIO86_GPIO		MFP_CFG_IN(GPIO86, AF1)
+#define GPIO87_GPIO		MFP_CFG_IN(GPIO87, AF1)
+#define GPIO88_GPIO		MFP_CFG_IN(GPIO88, AF1)
+#define GPIO89_GPIO		MFP_CFG_IN(GPIO89, AF1)
+
+/* SDRAM */
+#define GPIO86_nSDCS2		MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH)
+#define GPIO87_nSDCS3		MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH)
+#define GPIO88_RDnWR		MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH)
+#define GPIO89_nACRESET		MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
+
+/* USB */
+#define GPIO9_USB_RCV		MFP_CFG_IN(GPIO9, AF1)
+#define GPIO32_USB_VP		MFP_CFG_IN(GPIO32, AF2)
+#define GPIO34_USB_VM		MFP_CFG_IN(GPIO34, AF2)
+#define GPIO39_USB_VPO		MFP_CFG_OUT(GPIO39, AF3, DRIVE_LOW)
+#define GPIO56_USB_VMO		MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
+#define GPIO57_USB_nOE		MFP_CFG_OUT(GPIO57, AF1, DRIVE_HIGH)
+
+/* ASSP */
+#define GPIO28_ASSP_BITCLK_IN	MFP_CFG_IN(GPIO28, AF3)
+#define GPIO28_ASSP_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF3, DRIVE_LOW)
+#define GPIO29_ASSP_RXD		MFP_CFG_IN(GPIO29, AF3)
+#define GPIO30_ASSP_TXD		MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
+#define GPIO31_ASSP_SFRM_IN	MFP_CFG_IN(GPIO31, AF1)
+#define GPIO31_ASSP_SFRM_OUT	MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
+#endif
+
 #endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index 122bdbd..da4f85a 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -11,6 +11,12 @@
 #include <mach/mfp.h>
 #include <mach/mfp-pxa2xx.h>
 
+/* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
+ * bit is set, regardless of the GPIO configuration
+ */
+#define GPIO3_GPIO		MFP_CFG_IN(GPIO3, AF0)
+#define GPIO4_GPIO		MFP_CFG_IN(GPIO4, AF0)
+
 /* GPIO */
 #define GPIO85_GPIO		MFP_CFG_IN(GPIO85, AF0)
 #define GPIO86_GPIO		MFP_CFG_IN(GPIO86, AF0)
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
index fabd9b4..fa73f56 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
@@ -421,6 +421,7 @@
 #define GPIO20_PWM0		MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
 #define GPIO21_PWM2		MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
 #define GPIO22_PWM3		MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
+#define GPIO32_PWM0		MFP_CFG_LPM(GPIO32, AF4, PULL_LOW)
 
 /* CIR */
 #define GPIO46_CIR_OUT		MFP_CFG(GPIO46, AF1)
diff --git a/arch/arm/mach-pxa/include/mach/mioa701.h b/arch/arm/mach-pxa/include/mach/mioa701.h
index 8483cb5..0286844 100644
--- a/arch/arm/mach-pxa/include/mach/mioa701.h
+++ b/arch/arm/mach-pxa/include/mach/mioa701.h
@@ -10,12 +10,14 @@
 	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
 
 /* Global GPIOs */
-#define GPIO9_CHARGE_nEN			9
+#define GPIO9_CHARGE_EN				9
 #define GPIO18_POWEROFF				18
 #define GPIO87_LCD_POWER			87
+#define GPIO96_AC_DETECT			96
+#define GPIO80_MAYBE_CHARGE_VDROP		80	/* Drop of 88mV */
 
 /* USB */
-#define GPIO13_USB_DETECT			13
+#define GPIO13_nUSB_DETECT			13
 #define GPIO22_USB_ENABLE			22
 
 /* SDIO bits */
@@ -24,7 +26,10 @@
 #define GPIO91_SDIO_EN				91
 
 /* Bluetooth */
+#define GPIO14_BT_nACTIVITY			14
 #define GPIO83_BT_ON				83
+#define GPIO77_BT_UNKNOWN1			77
+#define GPIO86_BT_MAYBE_nRESET			86
 
 /* GPS */
 #define GPIO23_GPS_UNKNOWN1			23
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
index 4d452fc..cfca815 100644
--- a/arch/arm/mach-pxa/include/mach/mtd-xip.h
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -15,6 +15,7 @@
 #ifndef __ARCH_PXA_MTD_XIP_H__
 #define __ARCH_PXA_MTD_XIP_H__
 
+#include <mach/hardware.h>
 #include <mach/pxa-regs.h>
 
 #define xip_irqpending()	(ICIP & ICMR)
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
index 15295d9..31d615a 100644
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -13,6 +13,7 @@
 #ifndef __PXA_REGS_H
 #define __PXA_REGS_H
 
+#include <mach/hardware.h>
 
 /*
  * PXA Chip selects
@@ -123,298 +124,6 @@
 #define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
 #define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
 
-
-/*
- * UARTs
- */
-
-/* Full Function UART (FFUART) */
-#define FFUART		FFRBR
-#define FFRBR		__REG(0x40100000)  /* Receive Buffer Register (read only) */
-#define FFTHR		__REG(0x40100000)  /* Transmit Holding Register (write only) */
-#define FFIER		__REG(0x40100004)  /* Interrupt Enable Register (read/write) */
-#define FFIIR		__REG(0x40100008)  /* Interrupt ID Register (read only) */
-#define FFFCR		__REG(0x40100008)  /* FIFO Control Register (write only) */
-#define FFLCR		__REG(0x4010000C)  /* Line Control Register (read/write) */
-#define FFMCR		__REG(0x40100010)  /* Modem Control Register (read/write) */
-#define FFLSR		__REG(0x40100014)  /* Line Status Register (read only) */
-#define FFMSR		__REG(0x40100018)  /* Modem Status Register (read only) */
-#define FFSPR		__REG(0x4010001C)  /* Scratch Pad Register (read/write) */
-#define FFISR		__REG(0x40100020)  /* Infrared Selection Register (read/write) */
-#define FFDLL		__REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define FFDLH		__REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Bluetooth UART (BTUART) */
-#define BTUART		BTRBR
-#define BTRBR		__REG(0x40200000)  /* Receive Buffer Register (read only) */
-#define BTTHR		__REG(0x40200000)  /* Transmit Holding Register (write only) */
-#define BTIER		__REG(0x40200004)  /* Interrupt Enable Register (read/write) */
-#define BTIIR		__REG(0x40200008)  /* Interrupt ID Register (read only) */
-#define BTFCR		__REG(0x40200008)  /* FIFO Control Register (write only) */
-#define BTLCR		__REG(0x4020000C)  /* Line Control Register (read/write) */
-#define BTMCR		__REG(0x40200010)  /* Modem Control Register (read/write) */
-#define BTLSR		__REG(0x40200014)  /* Line Status Register (read only) */
-#define BTMSR		__REG(0x40200018)  /* Modem Status Register (read only) */
-#define BTSPR		__REG(0x4020001C)  /* Scratch Pad Register (read/write) */
-#define BTISR		__REG(0x40200020)  /* Infrared Selection Register (read/write) */
-#define BTDLL		__REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define BTDLH		__REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Standard UART (STUART) */
-#define STUART		STRBR
-#define STRBR		__REG(0x40700000)  /* Receive Buffer Register (read only) */
-#define STTHR		__REG(0x40700000)  /* Transmit Holding Register (write only) */
-#define STIER		__REG(0x40700004)  /* Interrupt Enable Register (read/write) */
-#define STIIR		__REG(0x40700008)  /* Interrupt ID Register (read only) */
-#define STFCR		__REG(0x40700008)  /* FIFO Control Register (write only) */
-#define STLCR		__REG(0x4070000C)  /* Line Control Register (read/write) */
-#define STMCR		__REG(0x40700010)  /* Modem Control Register (read/write) */
-#define STLSR		__REG(0x40700014)  /* Line Status Register (read only) */
-#define STMSR		__REG(0x40700018)  /* Reserved */
-#define STSPR		__REG(0x4070001C)  /* Scratch Pad Register (read/write) */
-#define STISR		__REG(0x40700020)  /* Infrared Selection Register (read/write) */
-#define STDLL		__REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define STDLH		__REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Hardware UART (HWUART) */
-#define HWUART		HWRBR
-#define HWRBR		__REG(0x41600000)  /* Receive Buffer Register (read only) */
-#define HWTHR		__REG(0x41600000)  /* Transmit Holding Register (write only) */
-#define HWIER		__REG(0x41600004)  /* Interrupt Enable Register (read/write) */
-#define HWIIR		__REG(0x41600008)  /* Interrupt ID Register (read only) */
-#define HWFCR		__REG(0x41600008)  /* FIFO Control Register (write only) */
-#define HWLCR		__REG(0x4160000C)  /* Line Control Register (read/write) */
-#define HWMCR		__REG(0x41600010)  /* Modem Control Register (read/write) */
-#define HWLSR		__REG(0x41600014)  /* Line Status Register (read only) */
-#define HWMSR		__REG(0x41600018)  /* Modem Status Register (read only) */
-#define HWSPR		__REG(0x4160001C)  /* Scratch Pad Register (read/write) */
-#define HWISR		__REG(0x41600020)  /* Infrared Selection Register (read/write) */
-#define HWFOR		__REG(0x41600024)  /* Receive FIFO Occupancy Register (read only) */
-#define HWABR		__REG(0x41600028)  /* Auto-Baud Control Register (read/write) */
-#define HWACR		__REG(0x4160002C)  /* Auto-Baud Count Register (read only) */
-#define HWDLL		__REG(0x41600000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define HWDLH		__REG(0x41600004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-#define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
-#define IER_UUE		(1 << 6)	/* UART Unit Enable */
-#define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
-#define IER_RTIOE	(1 << 4)	/* Receiver Time Out Interrupt Enable */
-#define IER_MIE		(1 << 3)	/* Modem Interrupt Enable */
-#define IER_RLSE	(1 << 2)	/* Receiver Line Status Interrupt Enable */
-#define IER_TIE		(1 << 1)	/* Transmit Data request Interrupt Enable */
-#define IER_RAVIE	(1 << 0)	/* Receiver Data Available Interrupt Enable */
-
-#define IIR_FIFOES1	(1 << 7)	/* FIFO Mode Enable Status */
-#define IIR_FIFOES0	(1 << 6)	/* FIFO Mode Enable Status */
-#define IIR_TOD		(1 << 3)	/* Time Out Detected */
-#define IIR_IID2	(1 << 2)	/* Interrupt Source Encoded */
-#define IIR_IID1	(1 << 1)	/* Interrupt Source Encoded */
-#define IIR_IP		(1 << 0)	/* Interrupt Pending (active low) */
-
-#define FCR_ITL2	(1 << 7)	/* Interrupt Trigger Level */
-#define FCR_ITL1	(1 << 6)	/* Interrupt Trigger Level */
-#define FCR_RESETTF	(1 << 2)	/* Reset Transmitter FIFO */
-#define FCR_RESETRF	(1 << 1)	/* Reset Receiver FIFO */
-#define FCR_TRFIFOE	(1 << 0)	/* Transmit and Receive FIFO Enable */
-#define FCR_ITL_1	(0)
-#define FCR_ITL_8	(FCR_ITL1)
-#define FCR_ITL_16	(FCR_ITL2)
-#define FCR_ITL_32	(FCR_ITL2|FCR_ITL1)
-
-#define LCR_DLAB	(1 << 7)	/* Divisor Latch Access Bit */
-#define LCR_SB		(1 << 6)	/* Set Break */
-#define LCR_STKYP	(1 << 5)	/* Sticky Parity */
-#define LCR_EPS		(1 << 4)	/* Even Parity Select */
-#define LCR_PEN		(1 << 3)	/* Parity Enable */
-#define LCR_STB		(1 << 2)	/* Stop Bit */
-#define LCR_WLS1	(1 << 1)	/* Word Length Select */
-#define LCR_WLS0	(1 << 0)	/* Word Length Select */
-
-#define LSR_FIFOE	(1 << 7)	/* FIFO Error Status */
-#define LSR_TEMT	(1 << 6)	/* Transmitter Empty */
-#define LSR_TDRQ	(1 << 5)	/* Transmit Data Request */
-#define LSR_BI		(1 << 4)	/* Break Interrupt */
-#define LSR_FE		(1 << 3)	/* Framing Error */
-#define LSR_PE		(1 << 2)	/* Parity Error */
-#define LSR_OE		(1 << 1)	/* Overrun Error */
-#define LSR_DR		(1 << 0)	/* Data Ready */
-
-#define MCR_LOOP	(1 << 4)
-#define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
-#define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
-#define MCR_RTS		(1 << 1)	/* Request to Send */
-#define MCR_DTR		(1 << 0)	/* Data Terminal Ready */
-
-#define MSR_DCD		(1 << 7)	/* Data Carrier Detect */
-#define MSR_RI		(1 << 6)	/* Ring Indicator */
-#define MSR_DSR		(1 << 5)	/* Data Set Ready */
-#define MSR_CTS		(1 << 4)	/* Clear To Send */
-#define MSR_DDCD	(1 << 3)	/* Delta Data Carrier Detect */
-#define MSR_TERI	(1 << 2)	/* Trailing Edge Ring Indicator */
-#define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
-#define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */
-
-/*
- * IrSR (Infrared Selection Register)
- */
-#define STISR_RXPL      (1 << 4)        /* Receive Data Polarity */
-#define STISR_TXPL      (1 << 3)        /* Transmit Data Polarity */
-#define STISR_XMODE     (1 << 2)        /* Transmit Pulse Width Select */
-#define STISR_RCVEIR    (1 << 1)        /* Receiver SIR Enable */
-#define STISR_XMITIR    (1 << 0)        /* Transmitter SIR Enable */
-
-
-/*
- * I2C registers - moved into drivers/i2c/busses/i2c-pxa.c
- */
-
-/*
- * Serial Audio Controller - moved into sound/soc/pxa/pxa2xx-i2s.c
- */
-
-/*
- * AC97 Controller registers
- */
-
-#define POCR		__REG(0x40500000)  /* PCM Out Control Register */
-#define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define POCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define PICR		__REG(0x40500004)  /* PCM In Control Register */
-#define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define PICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MCCR		__REG(0x40500008)  /* Mic In Control Register */
-#define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define MCCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define GCR		__REG(0x4050000C)  /* Global Control Register */
-#ifdef CONFIG_PXA3xx
-#define GCR_CLKBPB	(1 << 31)	/* Internal clock enable */
-#endif
-#define GCR_nDMAEN	(1 << 24)	/* non DMA Enable */
-#define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */
-#define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */
-#define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */
-#define GCR_PRIRDY_IEN	(1 << 8)	/* Primary Ready Interrupt Enable */
-#define GCR_SECRES_IEN	(1 << 5)	/* Secondary Resume Interrupt Enable */
-#define GCR_PRIRES_IEN	(1 << 4)	/* Primary Resume Interrupt Enable */
-#define GCR_ACLINK_OFF	(1 << 3)	/* AC-link Shut Off */
-#define GCR_WARM_RST	(1 << 2)	/* AC97 Warm Reset */
-#define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */
-#define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */
-
-#define POSR		__REG(0x40500010)  /* PCM Out Status Register */
-#define POSR_FIFOE	(1 << 4)	/* FIFO error */
-#define POSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define PISR		__REG(0x40500014)  /* PCM In Status Register */
-#define PISR_FIFOE	(1 << 4)	/* FIFO error */
-#define PISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define PISR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MCSR		__REG(0x40500018)  /* Mic In Status Register */
-#define MCSR_FIFOE	(1 << 4)	/* FIFO error */
-#define MCSR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define MCSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define GSR		__REG(0x4050001C)  /* Global Status Register */
-#define GSR_CDONE	(1 << 19)	/* Command Done */
-#define GSR_SDONE	(1 << 18)	/* Status Done */
-#define GSR_RDCS	(1 << 15)	/* Read Completion Status */
-#define GSR_BIT3SLT12	(1 << 14)	/* Bit 3 of slot 12 */
-#define GSR_BIT2SLT12	(1 << 13)	/* Bit 2 of slot 12 */
-#define GSR_BIT1SLT12	(1 << 12)	/* Bit 1 of slot 12 */
-#define GSR_SECRES	(1 << 11)	/* Secondary Resume Interrupt */
-#define GSR_PRIRES	(1 << 10)	/* Primary Resume Interrupt */
-#define GSR_SCR		(1 << 9)	/* Secondary Codec Ready */
-#define GSR_PCR		(1 << 8)	/*  Primary Codec Ready */
-#define GSR_MCINT	(1 << 7)	/* Mic In Interrupt */
-#define GSR_POINT	(1 << 6)	/* PCM Out Interrupt */
-#define GSR_PIINT	(1 << 5)	/* PCM In Interrupt */
-#define GSR_ACOFFD	(1 << 3)	/* AC-link Shut Off Done */
-#define GSR_MOINT	(1 << 2)	/* Modem Out Interrupt */
-#define GSR_MIINT	(1 << 1)	/* Modem In Interrupt */
-#define GSR_GSCI	(1 << 0)	/* Codec GPI Status Change Interrupt */
-
-#define CAR		__REG(0x40500020)  /* CODEC Access Register */
-#define CAR_CAIP	(1 << 0)	/* Codec Access In Progress */
-
-#define PCDR		__REG(0x40500040)  /* PCM FIFO Data Register */
-#define MCDR		__REG(0x40500060)  /* Mic-in FIFO Data Register */
-
-#define MOCR		__REG(0x40500100)  /* Modem Out Control Register */
-#define MOCR_FEIE	(1 << 3)	/* FIFO Error */
-#define MOCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MICR		__REG(0x40500108)  /* Modem In Control Register */
-#define MICR_FEIE	(1 << 3)	/* FIFO Error */
-#define MICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MOSR		__REG(0x40500110)  /* Modem Out Status Register */
-#define MOSR_FIFOE	(1 << 4)	/* FIFO error */
-#define MOSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MISR		__REG(0x40500118)  /* Modem In Status Register */
-#define MISR_FIFOE	(1 << 4)	/* FIFO error */
-#define MISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define MISR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MODR		__REG(0x40500140)  /* Modem FIFO Data Register */
-
-#define PAC_REG_BASE	__REG(0x40500200)  /* Primary Audio Codec */
-#define SAC_REG_BASE	__REG(0x40500300)  /* Secondary Audio Codec */
-#define PMC_REG_BASE	__REG(0x40500400)  /* Primary Modem Codec */
-#define SMC_REG_BASE	__REG(0x40500500)  /* Secondary Modem Codec */
-
-
-/*
- * Fast Infrared Communication Port
- */
-
-#define FICP		__REG(0x40800000)  /* Start of FICP area */
-#define ICCR0		__REG(0x40800000)  /* ICP Control Register 0 */
-#define ICCR1		__REG(0x40800004)  /* ICP Control Register 1 */
-#define ICCR2		__REG(0x40800008)  /* ICP Control Register 2 */
-#define ICDR		__REG(0x4080000c)  /* ICP Data Register */
-#define ICSR0		__REG(0x40800014)  /* ICP Status Register 0 */
-#define ICSR1		__REG(0x40800018)  /* ICP Status Register 1 */
-
-#define ICCR0_AME	(1 << 7)	/* Address match enable */
-#define ICCR0_TIE	(1 << 6)	/* Transmit FIFO interrupt enable */
-#define ICCR0_RIE	(1 << 5)	/* Recieve FIFO interrupt enable */
-#define ICCR0_RXE	(1 << 4)	/* Receive enable */
-#define ICCR0_TXE	(1 << 3)	/* Transmit enable */
-#define ICCR0_TUS	(1 << 2)	/* Transmit FIFO underrun select */
-#define ICCR0_LBM	(1 << 1)	/* Loopback mode */
-#define ICCR0_ITR	(1 << 0)	/* IrDA transmission */
-
-#define ICCR2_RXP       (1 << 3)	/* Receive Pin Polarity select */
-#define ICCR2_TXP       (1 << 2)	/* Transmit Pin Polarity select */
-#define ICCR2_TRIG	(3 << 0)	/* Receive FIFO Trigger threshold */
-#define ICCR2_TRIG_8    (0 << 0)	/* 	>= 8 bytes */
-#define ICCR2_TRIG_16   (1 << 0)	/*	>= 16 bytes */
-#define ICCR2_TRIG_32   (2 << 0)	/*	>= 32 bytes */
-
-#ifdef CONFIG_PXA27x
-#define ICSR0_EOC	(1 << 6)	/* DMA End of Descriptor Chain */
-#endif
-#define ICSR0_FRE	(1 << 5)	/* Framing error */
-#define ICSR0_RFS	(1 << 4)	/* Receive FIFO service request */
-#define ICSR0_TFS	(1 << 3)	/* Transnit FIFO service request */
-#define ICSR0_RAB	(1 << 2)	/* Receiver abort */
-#define ICSR0_TUR	(1 << 1)	/* Trunsmit FIFO underun */
-#define ICSR0_EIF	(1 << 0)	/* End/Error in FIFO */
-
-#define ICSR1_ROR	(1 << 6)	/* Receiver FIFO underrun  */
-#define ICSR1_CRE	(1 << 5)	/* CRC error */
-#define ICSR1_EOF	(1 << 4)	/* End of frame */
-#define ICSR1_TNF	(1 << 3)	/* Transmit FIFO not full */
-#define ICSR1_RNE	(1 << 2)	/* Receive FIFO not empty */
-#define ICSR1_TBY	(1 << 1)	/* Tramsmiter busy flag */
-#define ICSR1_RSY	(1 << 0)	/* Recevier synchronized flag */
-
-
 /*
  * Real Time Clock
  */
@@ -463,19 +172,6 @@
 
 
 /*
- * Pulse Width Modulator
- */
-
-#define PWM_CTRL0	__REG(0x40B00000)  /* PWM 0 Control Register */
-#define PWM_PWDUTY0	__REG(0x40B00004)  /* PWM 0 Duty Cycle Register */
-#define PWM_PERVAL0	__REG(0x40B00008)  /* PWM 0 Period Control Register */
-
-#define PWM_CTRL1	__REG(0x40C00000)  /* PWM 1Control Register */
-#define PWM_PWDUTY1	__REG(0x40C00004)  /* PWM 1 Duty Cycle Register */
-#define PWM_PERVAL1	__REG(0x40C00008)  /* PWM 1 Period Control Register */
-
-
-/*
  * Interrupt Controller
  */
 
@@ -496,19 +192,6 @@
  * General Purpose I/O
  */
 
-#define GPIO0_BASE	((void __iomem *)io_p2v(0x40E00000))
-#define GPIO1_BASE	((void __iomem *)io_p2v(0x40E00004))
-#define GPIO2_BASE	((void __iomem *)io_p2v(0x40E00008))
-#define GPIO3_BASE	((void __iomem *)io_p2v(0x40E00100))
-
-#define GPLR_OFFSET	0x00
-#define GPDR_OFFSET	0x0C
-#define GPSR_OFFSET	0x18
-#define GPCR_OFFSET	0x24
-#define GRER_OFFSET	0x30
-#define GFER_OFFSET	0x3C
-#define GEDR_OFFSET	0x48
-
 #define GPLR0		__REG(0x40E00000)  /* GPIO Pin-Level Register GPIO<31:0> */
 #define GPLR1		__REG(0x40E00004)  /* GPIO Pin-Level Register GPIO<63:32> */
 #define GPLR2		__REG(0x40E00008)  /* GPIO Pin-Level Register GPIO<80:64> */
@@ -558,10 +241,6 @@
 
 #define GPIO_bit(x)	(1 << ((x) & 0x1f))
 
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-
-/* Interrupt Controller */
-
 #define _GPLR(x)	__REG2(0x40E00000, ((x) & 0x60) >> 3)
 #define _GPDR(x)	__REG2(0x40E0000C, ((x) & 0x60) >> 3)
 #define _GPSR(x)	__REG2(0x40E00018, ((x) & 0x60) >> 3)
@@ -580,189 +259,5 @@
 #define GEDR(x)		(*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
 #define GAFR(x)		(*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
 			 ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
-#else
-
-#define GPLR(x)		__REG2(0x40E00000, ((x) & 0x60) >> 3)
-#define GPDR(x)		__REG2(0x40E0000C, ((x) & 0x60) >> 3)
-#define GPSR(x)		__REG2(0x40E00018, ((x) & 0x60) >> 3)
-#define GPCR(x)		__REG2(0x40E00024, ((x) & 0x60) >> 3)
-#define GRER(x)		__REG2(0x40E00030, ((x) & 0x60) >> 3)
-#define GFER(x)		__REG2(0x40E0003C, ((x) & 0x60) >> 3)
-#define GEDR(x)		__REG2(0x40E00048, ((x) & 0x60) >> 3)
-#define GAFR(x)		__REG2(0x40E00054, ((x) & 0x70) >> 2)
-
-#endif
-
-/*
- * Power Manager - see pxa2xx-regs.h
- */
-
-/*
- * SSP Serial Port Registers - see arch/arm/mach-pxa/include/mach/regs-ssp.h
- */
-
-/*
- * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h
- */
-
-/*
- * Core Clock - see arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
- */
-
-#ifdef CONFIG_PXA27x
-
-/* Camera Interface */
-#define CICR0		__REG(0x50000000)
-#define CICR1		__REG(0x50000004)
-#define CICR2		__REG(0x50000008)
-#define CICR3		__REG(0x5000000C)
-#define CICR4		__REG(0x50000010)
-#define CISR		__REG(0x50000014)
-#define CIFR		__REG(0x50000018)
-#define CITOR		__REG(0x5000001C)
-#define CIBR0		__REG(0x50000028)
-#define CIBR1		__REG(0x50000030)
-#define CIBR2		__REG(0x50000038)
-
-#define CICR0_DMAEN	(1 << 31)	/* DMA request enable */
-#define CICR0_PAR_EN	(1 << 30)	/* Parity enable */
-#define CICR0_SL_CAP_EN	(1 << 29)	/* Capture enable for slave mode */
-#define CICR0_ENB	(1 << 28)	/* Camera interface enable */
-#define CICR0_DIS	(1 << 27)	/* Camera interface disable */
-#define CICR0_SIM	(0x7 << 24)	/* Sensor interface mode mask */
-#define CICR0_TOM	(1 << 9)	/* Time-out mask */
-#define CICR0_RDAVM	(1 << 8)	/* Receive-data-available mask */
-#define CICR0_FEM	(1 << 7)	/* FIFO-empty mask */
-#define CICR0_EOLM	(1 << 6)	/* End-of-line mask */
-#define CICR0_PERRM	(1 << 5)	/* Parity-error mask */
-#define CICR0_QDM	(1 << 4)	/* Quick-disable mask */
-#define CICR0_CDM	(1 << 3)	/* Disable-done mask */
-#define CICR0_SOFM	(1 << 2)	/* Start-of-frame mask */
-#define CICR0_EOFM	(1 << 1)	/* End-of-frame mask */
-#define CICR0_FOM	(1 << 0)	/* FIFO-overrun mask */
-
-#define CICR1_TBIT	(1 << 31)	/* Transparency bit */
-#define CICR1_RGBT_CONV	(0x3 << 29)	/* RGBT conversion mask */
-#define CICR1_PPL	(0x7ff << 15)	/* Pixels per line mask */
-#define CICR1_RGB_CONV	(0x7 << 12)	/* RGB conversion mask */
-#define CICR1_RGB_F	(1 << 11)	/* RGB format */
-#define CICR1_YCBCR_F	(1 << 10)	/* YCbCr format */
-#define CICR1_RGB_BPP	(0x7 << 7)	/* RGB bis per pixel mask */
-#define CICR1_RAW_BPP	(0x3 << 5)	/* Raw bis per pixel mask */
-#define CICR1_COLOR_SP	(0x3 << 3)	/* Color space mask */
-#define CICR1_DW	(0x7 << 0)	/* Data width mask */
-
-#define CICR2_BLW	(0xff << 24)	/* Beginning-of-line pixel clock
-					   wait count mask */
-#define CICR2_ELW	(0xff << 16)	/* End-of-line pixel clock
-					   wait count mask */
-#define CICR2_HSW	(0x3f << 10)	/* Horizontal sync pulse width mask */
-#define CICR2_BFPW	(0x3f << 3)	/* Beginning-of-frame pixel clock
-					   wait count mask */
-#define CICR2_FSW	(0x7 << 0)	/* Frame stabilization
-					   wait count mask */
-
-#define CICR3_BFW	(0xff << 24)	/* Beginning-of-frame line clock
-					   wait count mask */
-#define CICR3_EFW	(0xff << 16)	/* End-of-frame line clock
-					   wait count mask */
-#define CICR3_VSW	(0x3f << 10)	/* Vertical sync pulse width mask */
-#define CICR3_BFPW	(0x3f << 3)	/* Beginning-of-frame pixel clock
-					   wait count mask */
-#define CICR3_LPF	(0x7ff << 0)	/* Lines per frame mask */
-
-#define CICR4_MCLK_DLY	(0x3 << 24)	/* MCLK Data Capture Delay mask */
-#define CICR4_PCLK_EN	(1 << 23)	/* Pixel clock enable */
-#define CICR4_PCP	(1 << 22)	/* Pixel clock polarity */
-#define CICR4_HSP	(1 << 21)	/* Horizontal sync polarity */
-#define CICR4_VSP	(1 << 20)	/* Vertical sync polarity */
-#define CICR4_MCLK_EN	(1 << 19)	/* MCLK enable */
-#define CICR4_FR_RATE	(0x7 << 8)	/* Frame rate mask */
-#define CICR4_DIV	(0xff << 0)	/* Clock divisor mask */
-
-#define CISR_FTO	(1 << 15)	/* FIFO time-out */
-#define CISR_RDAV_2	(1 << 14)	/* Channel 2 receive data available */
-#define CISR_RDAV_1	(1 << 13)	/* Channel 1 receive data available */
-#define CISR_RDAV_0	(1 << 12)	/* Channel 0 receive data available */
-#define CISR_FEMPTY_2	(1 << 11)	/* Channel 2 FIFO empty */
-#define CISR_FEMPTY_1	(1 << 10)	/* Channel 1 FIFO empty */
-#define CISR_FEMPTY_0	(1 << 9)	/* Channel 0 FIFO empty */
-#define CISR_EOL	(1 << 8)	/* End of line */
-#define CISR_PAR_ERR	(1 << 7)	/* Parity error */
-#define CISR_CQD	(1 << 6)	/* Camera interface quick disable */
-#define CISR_CDD	(1 << 5)	/* Camera interface disable done */
-#define CISR_SOF	(1 << 4)	/* Start of frame */
-#define CISR_EOF	(1 << 3)	/* End of frame */
-#define CISR_IFO_2	(1 << 2)	/* FIFO overrun for Channel 2 */
-#define CISR_IFO_1	(1 << 1)	/* FIFO overrun for Channel 1 */
-#define CISR_IFO_0	(1 << 0)	/* FIFO overrun for Channel 0 */
-
-#define CIFR_FLVL2	(0x7f << 23)	/* FIFO 2 level mask */
-#define CIFR_FLVL1	(0x7f << 16)	/* FIFO 1 level mask */
-#define CIFR_FLVL0	(0xff << 8)	/* FIFO 0 level mask */
-#define CIFR_THL_0	(0x3 << 4)	/* Threshold Level for Channel 0 FIFO */
-#define CIFR_RESET_F	(1 << 3)	/* Reset input FIFOs */
-#define CIFR_FEN2	(1 << 2)	/* FIFO enable for channel 2 */
-#define CIFR_FEN1	(1 << 1)	/* FIFO enable for channel 1 */
-#define CIFR_FEN0	(1 << 0)	/* FIFO enable for channel 0 */
-
-#define SRAM_SIZE		0x40000 /* 4x64K  */
-
-#define SRAM_MEM_PHYS		0x5C000000
-
-#define IMPMCR		__REG(0x58000000) /* IM Power Management Control Reg */
-#define IMPMSR		__REG(0x58000008) /* IM Power Management Status Reg */
-
-#define IMPMCR_PC3		(0x3 << 22) /* Bank 3 Power Control */
-#define IMPMCR_PC3_RUN_MODE	(0x0 << 22) /*   Run mode */
-#define IMPMCR_PC3_STANDBY_MODE	(0x1 << 22) /*   Standby mode */
-#define IMPMCR_PC3_AUTO_MODE	(0x3 << 22) /*   Automatically controlled */
-
-#define IMPMCR_PC2		(0x3 << 20) /* Bank 2 Power Control */
-#define IMPMCR_PC2_RUN_MODE	(0x0 << 20) /*   Run mode */
-#define IMPMCR_PC2_STANDBY_MODE	(0x1 << 20) /*   Standby mode */
-#define IMPMCR_PC2_AUTO_MODE	(0x3 << 20) /*   Automatically controlled */
-
-#define IMPMCR_PC1		(0x3 << 18) /* Bank 1 Power Control */
-#define IMPMCR_PC1_RUN_MODE	(0x0 << 18) /*   Run mode */
-#define IMPMCR_PC1_STANDBY_MODE	(0x1 << 18) /*   Standby mode */
-#define IMPMCR_PC1_AUTO_MODE	(0x3 << 18) /*   Automatically controlled */
-
-#define IMPMCR_PC0		(0x3 << 16) /* Bank 0 Power Control */
-#define IMPMCR_PC0_RUN_MODE	(0x0 << 16) /*   Run mode */
-#define IMPMCR_PC0_STANDBY_MODE	(0x1 << 16) /*   Standby mode */
-#define IMPMCR_PC0_AUTO_MODE	(0x3 << 16) /*   Automatically controlled */
-
-#define IMPMCR_AW3		(1 << 11) /* Bank 3 Automatic Wake-up enable */
-#define IMPMCR_AW2		(1 << 10) /* Bank 2 Automatic Wake-up enable */
-#define IMPMCR_AW1		(1 << 9)  /* Bank 1 Automatic Wake-up enable */
-#define IMPMCR_AW0		(1 << 8)  /* Bank 0 Automatic Wake-up enable */
-
-#define IMPMCR_DST		(0xFF << 0) /* Delay Standby Time, ms */
-
-#define IMPMSR_PS3		(0x3 << 6) /* Bank 3 Power Status: */
-#define IMPMSR_PS3_RUN_MODE	(0x0 << 6) /*    Run mode */
-#define IMPMSR_PS3_STANDBY_MODE	(0x1 << 6) /*    Standby mode */
-
-#define IMPMSR_PS2		(0x3 << 4) /* Bank 2 Power Status: */
-#define IMPMSR_PS2_RUN_MODE	(0x0 << 4) /*    Run mode */
-#define IMPMSR_PS2_STANDBY_MODE	(0x1 << 4) /*    Standby mode */
-
-#define IMPMSR_PS1		(0x3 << 2) /* Bank 1 Power Status: */
-#define IMPMSR_PS1_RUN_MODE	(0x0 << 2) /*    Run mode */
-#define IMPMSR_PS1_STANDBY_MODE	(0x1 << 2) /*    Standby mode */
-
-#define IMPMSR_PS0		(0x3 << 0) /* Bank 0 Power Status: */
-#define IMPMSR_PS0_RUN_MODE	(0x0 << 0) /*    Run mode */
-#define IMPMSR_PS0_STANDBY_MODE	(0x1 << 0) /*    Standby mode */
-
-#endif
-
-/* PWRMODE register M field values */
-
-#define PWRMODE_IDLE		0x1
-#define PWRMODE_STANDBY		0x2
-#define PWRMODE_SLEEP		0x3
-#define PWRMODE_DEEPSLEEP	0x7
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
index 6ef1dd0..d83393e 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
@@ -365,4 +365,9 @@
 #define GPIO117_I2CSCL_MD	(117 | GPIO_ALT_FN_1_IN)
 #define GPIO118_I2CSDA_MD	(118 | GPIO_ALT_FN_1_IN)
 
+/*
+ * Handy routine to set GPIO alternate functions
+ */
+extern int pxa_gpio_mode( int gpio_mode );
+
 #endif /* __ASM_ARCH_PXA2XX_GPIO_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
index 806ecfe..77102d6 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -49,6 +49,11 @@
 #define MECR_NOS	(1 << 0)	/* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
 #define MECR_CIT	(1 << 1)	/* Card Is There: 0 -> no card, 1 -> card inserted */
 
+#define MDCNFG_DE0	(1 << 0)	/* SDRAM Bank 0 Enable */
+#define MDCNFG_DE1	(1 << 1)	/* SDRAM Bank 1 Enable */
+#define MDCNFG_DE2	(1 << 16)	/* SDRAM Bank 2 Enable */
+#define MDCNFG_DE3	(1 << 17)	/* SDRAM Bank 3 Enable */
+
 #define MDREFR_K0DB4	(1 << 29)	/* SDCLK0 Divide by 4 Control/Status */
 #define MDREFR_K2FREE	(1 << 25)	/* SDRAM Free-Running Control */
 #define MDREFR_K1FREE	(1 << 24)	/* SDRAM Free-Running Control */
@@ -243,4 +248,11 @@
 #define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
 #define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
 
+/* PWRMODE register M field values */
+
+#define PWRMODE_IDLE		0x1
+#define PWRMODE_STANDBY		0x2
+#define PWRMODE_SLEEP		0x3
+#define PWRMODE_DEEPSLEEP	0x7
+
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index cbda4d3..6932720 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -48,6 +48,7 @@
 #define LCD_MONO_DSTN_8BPP	((8  << 4) | LCD_TYPE_MONO_DSTN)
 #define LCD_COLOR_STN_8BPP	((8  << 4) | LCD_TYPE_COLOR_STN)
 #define LCD_COLOR_DSTN_16BPP	((16 << 4) | LCD_TYPE_COLOR_DSTN)
+#define LCD_COLOR_TFT_8BPP	((8  << 4) | LCD_TYPE_COLOR_TFT)
 #define LCD_COLOR_TFT_16BPP	((16 << 4) | LCD_TYPE_COLOR_TFT)
 #define LCD_COLOR_TFT_18BPP	((18 << 4) | LCD_TYPE_COLOR_TFT)
 #define LCD_SMART_PANEL_8BPP	((8  << 4) | LCD_TYPE_SMART_PANEL)
@@ -94,6 +95,10 @@ struct pxafb_mode_info {
 	 *    in pxa27x and pxa3xx, initialize them to the same value or
 	 *    the larger one will be used
 	 * 3. same to {rd,wr}_pulse_width
+	 *
+	 * 4. LCD_PCLK_EDGE_{RISE,FALL} controls the L_PCLK_WR polarity
+	 * 5. sync & FB_SYNC_HOR_HIGH_ACT controls the L_LCLK_A0
+	 * 6. sync & FB_SYNC_VERT_HIGH_ACT controls the L_LCLK_RD
 	 */
 	unsigned	a0csrd_set_hld;	/* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
 	unsigned	a0cswr_set_hld;	/* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
@@ -108,6 +113,7 @@ struct pxafb_mach_info {
 	unsigned int num_modes;
 
 	unsigned int	lcd_conn;
+	unsigned long	video_mem_size;
 
 	u_int		fixed_modes:1,
 			cmap_inverse:1,
diff --git a/arch/arm/mach-pxa/include/mach/regs-ac97.h b/arch/arm/mach-pxa/include/mach/regs-ac97.h
new file mode 100644
index 0000000..e41b9d2
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-ac97.h
@@ -0,0 +1,99 @@
+#ifndef __ASM_ARCH_REGS_AC97_H
+#define __ASM_ARCH_REGS_AC97_H
+
+/*
+ * AC97 Controller registers
+ */
+
+#define POCR		__REG(0x40500000)  /* PCM Out Control Register */
+#define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define POCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define PICR		__REG(0x40500004)  /* PCM In Control Register */
+#define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define PICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MCCR		__REG(0x40500008)  /* Mic In Control Register */
+#define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define MCCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define GCR		__REG(0x4050000C)  /* Global Control Register */
+#ifdef CONFIG_PXA3xx
+#define GCR_CLKBPB	(1 << 31)	/* Internal clock enable */
+#endif
+#define GCR_nDMAEN	(1 << 24)	/* non DMA Enable */
+#define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */
+#define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */
+#define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */
+#define GCR_PRIRDY_IEN	(1 << 8)	/* Primary Ready Interrupt Enable */
+#define GCR_SECRES_IEN	(1 << 5)	/* Secondary Resume Interrupt Enable */
+#define GCR_PRIRES_IEN	(1 << 4)	/* Primary Resume Interrupt Enable */
+#define GCR_ACLINK_OFF	(1 << 3)	/* AC-link Shut Off */
+#define GCR_WARM_RST	(1 << 2)	/* AC97 Warm Reset */
+#define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */
+#define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */
+
+#define POSR		__REG(0x40500010)  /* PCM Out Status Register */
+#define POSR_FIFOE	(1 << 4)	/* FIFO error */
+#define POSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define PISR		__REG(0x40500014)  /* PCM In Status Register */
+#define PISR_FIFOE	(1 << 4)	/* FIFO error */
+#define PISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define PISR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MCSR		__REG(0x40500018)  /* Mic In Status Register */
+#define MCSR_FIFOE	(1 << 4)	/* FIFO error */
+#define MCSR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define MCSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define GSR		__REG(0x4050001C)  /* Global Status Register */
+#define GSR_CDONE	(1 << 19)	/* Command Done */
+#define GSR_SDONE	(1 << 18)	/* Status Done */
+#define GSR_RDCS	(1 << 15)	/* Read Completion Status */
+#define GSR_BIT3SLT12	(1 << 14)	/* Bit 3 of slot 12 */
+#define GSR_BIT2SLT12	(1 << 13)	/* Bit 2 of slot 12 */
+#define GSR_BIT1SLT12	(1 << 12)	/* Bit 1 of slot 12 */
+#define GSR_SECRES	(1 << 11)	/* Secondary Resume Interrupt */
+#define GSR_PRIRES	(1 << 10)	/* Primary Resume Interrupt */
+#define GSR_SCR		(1 << 9)	/* Secondary Codec Ready */
+#define GSR_PCR		(1 << 8)	/*  Primary Codec Ready */
+#define GSR_MCINT	(1 << 7)	/* Mic In Interrupt */
+#define GSR_POINT	(1 << 6)	/* PCM Out Interrupt */
+#define GSR_PIINT	(1 << 5)	/* PCM In Interrupt */
+#define GSR_ACOFFD	(1 << 3)	/* AC-link Shut Off Done */
+#define GSR_MOINT	(1 << 2)	/* Modem Out Interrupt */
+#define GSR_MIINT	(1 << 1)	/* Modem In Interrupt */
+#define GSR_GSCI	(1 << 0)	/* Codec GPI Status Change Interrupt */
+
+#define CAR		__REG(0x40500020)  /* CODEC Access Register */
+#define CAR_CAIP	(1 << 0)	/* Codec Access In Progress */
+
+#define PCDR		__REG(0x40500040)  /* PCM FIFO Data Register */
+#define MCDR		__REG(0x40500060)  /* Mic-in FIFO Data Register */
+
+#define MOCR		__REG(0x40500100)  /* Modem Out Control Register */
+#define MOCR_FEIE	(1 << 3)	/* FIFO Error */
+#define MOCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MICR		__REG(0x40500108)  /* Modem In Control Register */
+#define MICR_FEIE	(1 << 3)	/* FIFO Error */
+#define MICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MOSR		__REG(0x40500110)  /* Modem Out Status Register */
+#define MOSR_FIFOE	(1 << 4)	/* FIFO error */
+#define MOSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MISR		__REG(0x40500118)  /* Modem In Status Register */
+#define MISR_FIFOE	(1 << 4)	/* FIFO error */
+#define MISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define MISR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MODR		__REG(0x40500140)  /* Modem FIFO Data Register */
+
+#define PAC_REG_BASE	__REG(0x40500200)  /* Primary Audio Codec */
+#define SAC_REG_BASE	__REG(0x40500300)  /* Secondary Audio Codec */
+#define PMC_REG_BASE	__REG(0x40500400)  /* Primary Modem Codec */
+#define SMC_REG_BASE	__REG(0x40500500)  /* Secondary Modem Codec */
+
+#endif /* __ASM_ARCH_REGS_AC97_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-lcd.h b/arch/arm/mach-pxa/include/mach/regs-lcd.h
index c689c4e..f82dcea 100644
--- a/arch/arm/mach-pxa/include/mach/regs-lcd.h
+++ b/arch/arm/mach-pxa/include/mach/regs-lcd.h
@@ -12,27 +12,29 @@
 #define LCCR3		(0x00C)	/* LCD Controller Control Register 3 */
 #define LCCR4		(0x010)	/* LCD Controller Control Register 4 */
 #define LCCR5		(0x014)	/* LCD Controller Control Register 5 */
-#define DFBR0		(0x020)	/* DMA Channel 0 Frame Branch Register */
-#define DFBR1		(0x024)	/* DMA Channel 1 Frame Branch Register */
-#define LCSR		(0x038)	/* LCD Controller Status Register */
+#define LCSR		(0x038)	/* LCD Controller Status Register 0 */
+#define LCSR1		(0x034)	/* LCD Controller Status Register 1 */
 #define LIIDR		(0x03C)	/* LCD Controller Interrupt ID Register */
 #define TMEDRGBR	(0x040)	/* TMED RGB Seed Register */
 #define TMEDCR		(0x044)	/* TMED Control Register */
 
+#define FBR0		(0x020)	/* DMA Channel 0 Frame Branch Register */
+#define FBR1		(0x024)	/* DMA Channel 1 Frame Branch Register */
+#define FBR2		(0x028) /* DMA Channel 2 Frame Branch Register */
+#define FBR3		(0x02C) /* DMA Channel 2 Frame Branch Register */
+#define FBR4		(0x030) /* DMA Channel 2 Frame Branch Register */
+#define FBR5		(0x110) /* DMA Channel 2 Frame Branch Register */
+#define FBR6		(0x114) /* DMA Channel 2 Frame Branch Register */
+
+#define OVL1C1		(0x050)	/* Overlay 1 Control Register 1 */
+#define OVL1C2		(0x060)	/* Overlay 1 Control Register 2 */
+#define OVL2C1		(0x070)	/* Overlay 2 Control Register 1 */
+#define OVL2C2		(0x080)	/* Overlay 2 Control Register 2 */
+
 #define CMDCR		(0x100)	/* Command Control Register */
 #define PRSR		(0x104)	/* Panel Read Status Register */
 
-#define LCCR3_1BPP	(0 << 24)
-#define LCCR3_2BPP	(1 << 24)
-#define LCCR3_4BPP	(2 << 24)
-#define LCCR3_8BPP	(3 << 24)
-#define LCCR3_16BPP	(4 << 24)
-#define LCCR3_18BPP	(5 << 24)
-#define LCCR3_18BPP_P	(6 << 24)
-#define LCCR3_19BPP	(7 << 24)
-#define LCCR3_19BPP_P	(1 << 29)
-#define LCCR3_24BPP	((1 << 29) | (1 << 24))
-#define LCCR3_25BPP	((1 << 29) | (2 << 24))
+#define LCCR3_BPP(x)	((((x) & 0x7) << 24) | (((x) & 0x8) ? (1 << 29) : 0))
 
 #define LCCR3_PDFOR_0	(0 << 30)
 #define LCCR3_PDFOR_1	(1 << 30)
@@ -42,19 +44,16 @@
 #define LCCR4_PAL_FOR_0	(0 << 15)
 #define LCCR4_PAL_FOR_1	(1 << 15)
 #define LCCR4_PAL_FOR_2	(2 << 15)
+#define LCCR4_PAL_FOR_3	(3 << 15)
 #define LCCR4_PAL_FOR_MASK	(3 << 15)
 
 #define FDADR0		(0x200)	/* DMA Channel 0 Frame Descriptor Address Register */
-#define FSADR0		(0x204)	/* DMA Channel 0 Frame Source Address Register */
-#define FIDR0		(0x208)	/* DMA Channel 0 Frame ID Register */
-#define LDCMD0		(0x20C)	/* DMA Channel 0 Command Register */
 #define FDADR1		(0x210)	/* DMA Channel 1 Frame Descriptor Address Register */
-#define FSADR1		(0x214)	/* DMA Channel 1 Frame Source Address Register */
-#define FIDR1		(0x218)	/* DMA Channel 1 Frame ID Register */
-#define LDCMD1		(0x21C)	/* DMA Channel 1 Command Register */
+#define FDADR2		(0x220)	/* DMA Channel 2 Frame Descriptor Address Register */
+#define FDADR3		(0x230)	/* DMA Channel 3 Frame Descriptor Address Register */
+#define FDADR4		(0x240)	/* DMA Channel 4 Frame Descriptor Address Register */
+#define FDADR5		(0x250)	/* DMA Channel 5 Frame Descriptor Address Register */
 #define FDADR6		(0x260) /* DMA Channel 6 Frame Descriptor Address Register */
-#define FSADR6		(0x264) /* DMA Channel 6 Frame Source Address Register */
-#define FIDR6		(0x268) /* DMA Channel 6 Frame ID Register */
 
 #define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
 #define LCCR0_CMS	(1 << 1)	/* Color/Monochrome Display Select */
@@ -126,9 +125,6 @@
 #define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor */
 #define LCCR3_PixClkDiv(Div)	(((Div) << FShft (LCCR3_PCD)))
 
-#define LCCR3_BPP	Fld (3, 24)	/* Bit Per Pixel */
-#define LCCR3_Bpp(Bpp)	(((Bpp) << FShft (LCCR3_BPP)))
-
 #define LCCR3_ACB	Fld (8, 8)	/* AC Bias */
 #define LCCR3_Acb(Acb)	(((Acb) << FShft (LCCR3_ACB)))
 
@@ -157,8 +153,22 @@
 #define LCSR_RD_ST	(1 << 11)	/* read status */
 #define LCSR_CMD_INT	(1 << 12)	/* command interrupt */
 
+#define LCSR1_IU(x)	(1 << ((x) + 23)) /* Input FIFO underrun */
+#define LCSR1_BS(x)	(1 << ((x) + 15)) /* Branch Status */
+#define LCSR1_EOF(x)	(1 << ((x) + 7))  /* End of Frame Status */
+#define LCSR1_SOF(x)	(1 << ((x) - 1))  /* Start of Frame Status */
+
 #define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
 
+/* overlay control registers */
+#define OVLxC1_PPL(x)	((((x) - 1) & 0x3ff) << 0)	/* Pixels Per Line */
+#define OVLxC1_LPO(x)	((((x) - 1) & 0x3ff) << 10)	/* Number of Lines */
+#define OVLxC1_BPP(x)	(((x) & 0xf) << 20)	/* Bits Per Pixel */
+#define OVLxC1_OEN	(1 << 31)		/* Enable bit for Overlay */
+#define OVLxC2_XPOS(x)	(((x) & 0x3ff) << 0)	/* Horizontal Position */
+#define OVLxC2_YPOS(x)	(((x) & 0x3ff) << 10)	/* Vertical Position */
+#define OVL2C2_PFOR(x)	(((x) & 0x7) << 20)	/* Pixel Format */
+
 /* smartpanel related */
 #define PRSR_DATA(x)	((x) & 0xff)	/* Panel Data */
 #define PRSR_A0		(1 << 8)	/* Read Data Source */
@@ -177,4 +187,11 @@
 
 #define SMART_CMD(x)	(SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
 #define SMART_DAT(x)	(SMART_CMD_WRITE_DATA | ((x) & 0xff))
+
+/* SMART_DELAY() is introduced for software controlled delay primitive which
+ * can be inserted between command sequences, unused command 0x6 is used here
+ * and delay ranges from 0ms ~ 255ms
+ */
+#define SMART_CMD_DELAY		(0x6 << 9)
+#define SMART_DELAY(ms)		(SMART_CMD_DELAY | ((ms) & 0xff))
 #endif /* __ASM_ARCH_REGS_LCD_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-uart.h b/arch/arm/mach-pxa/include/mach/regs-uart.h
new file mode 100644
index 0000000..55aeb7f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-uart.h
@@ -0,0 +1,143 @@
+#ifndef __ASM_ARCH_REGS_UART_H
+#define __ASM_ARCH_REGS_UART_H
+
+/*
+ * UARTs
+ */
+
+/* Full Function UART (FFUART) */
+#define FFUART		FFRBR
+#define FFRBR		__REG(0x40100000)  /* Receive Buffer Register (read only) */
+#define FFTHR		__REG(0x40100000)  /* Transmit Holding Register (write only) */
+#define FFIER		__REG(0x40100004)  /* Interrupt Enable Register (read/write) */
+#define FFIIR		__REG(0x40100008)  /* Interrupt ID Register (read only) */
+#define FFFCR		__REG(0x40100008)  /* FIFO Control Register (write only) */
+#define FFLCR		__REG(0x4010000C)  /* Line Control Register (read/write) */
+#define FFMCR		__REG(0x40100010)  /* Modem Control Register (read/write) */
+#define FFLSR		__REG(0x40100014)  /* Line Status Register (read only) */
+#define FFMSR		__REG(0x40100018)  /* Modem Status Register (read only) */
+#define FFSPR		__REG(0x4010001C)  /* Scratch Pad Register (read/write) */
+#define FFISR		__REG(0x40100020)  /* Infrared Selection Register (read/write) */
+#define FFDLL		__REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define FFDLH		__REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Bluetooth UART (BTUART) */
+#define BTUART		BTRBR
+#define BTRBR		__REG(0x40200000)  /* Receive Buffer Register (read only) */
+#define BTTHR		__REG(0x40200000)  /* Transmit Holding Register (write only) */
+#define BTIER		__REG(0x40200004)  /* Interrupt Enable Register (read/write) */
+#define BTIIR		__REG(0x40200008)  /* Interrupt ID Register (read only) */
+#define BTFCR		__REG(0x40200008)  /* FIFO Control Register (write only) */
+#define BTLCR		__REG(0x4020000C)  /* Line Control Register (read/write) */
+#define BTMCR		__REG(0x40200010)  /* Modem Control Register (read/write) */
+#define BTLSR		__REG(0x40200014)  /* Line Status Register (read only) */
+#define BTMSR		__REG(0x40200018)  /* Modem Status Register (read only) */
+#define BTSPR		__REG(0x4020001C)  /* Scratch Pad Register (read/write) */
+#define BTISR		__REG(0x40200020)  /* Infrared Selection Register (read/write) */
+#define BTDLL		__REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define BTDLH		__REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Standard UART (STUART) */
+#define STUART		STRBR
+#define STRBR		__REG(0x40700000)  /* Receive Buffer Register (read only) */
+#define STTHR		__REG(0x40700000)  /* Transmit Holding Register (write only) */
+#define STIER		__REG(0x40700004)  /* Interrupt Enable Register (read/write) */
+#define STIIR		__REG(0x40700008)  /* Interrupt ID Register (read only) */
+#define STFCR		__REG(0x40700008)  /* FIFO Control Register (write only) */
+#define STLCR		__REG(0x4070000C)  /* Line Control Register (read/write) */
+#define STMCR		__REG(0x40700010)  /* Modem Control Register (read/write) */
+#define STLSR		__REG(0x40700014)  /* Line Status Register (read only) */
+#define STMSR		__REG(0x40700018)  /* Reserved */
+#define STSPR		__REG(0x4070001C)  /* Scratch Pad Register (read/write) */
+#define STISR		__REG(0x40700020)  /* Infrared Selection Register (read/write) */
+#define STDLL		__REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define STDLH		__REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Hardware UART (HWUART) */
+#define HWUART		HWRBR
+#define HWRBR		__REG(0x41600000)  /* Receive Buffer Register (read only) */
+#define HWTHR		__REG(0x41600000)  /* Transmit Holding Register (write only) */
+#define HWIER		__REG(0x41600004)  /* Interrupt Enable Register (read/write) */
+#define HWIIR		__REG(0x41600008)  /* Interrupt ID Register (read only) */
+#define HWFCR		__REG(0x41600008)  /* FIFO Control Register (write only) */
+#define HWLCR		__REG(0x4160000C)  /* Line Control Register (read/write) */
+#define HWMCR		__REG(0x41600010)  /* Modem Control Register (read/write) */
+#define HWLSR		__REG(0x41600014)  /* Line Status Register (read only) */
+#define HWMSR		__REG(0x41600018)  /* Modem Status Register (read only) */
+#define HWSPR		__REG(0x4160001C)  /* Scratch Pad Register (read/write) */
+#define HWISR		__REG(0x41600020)  /* Infrared Selection Register (read/write) */
+#define HWFOR		__REG(0x41600024)  /* Receive FIFO Occupancy Register (read only) */
+#define HWABR		__REG(0x41600028)  /* Auto-Baud Control Register (read/write) */
+#define HWACR		__REG(0x4160002C)  /* Auto-Baud Count Register (read only) */
+#define HWDLL		__REG(0x41600000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define HWDLH		__REG(0x41600004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+#define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
+#define IER_UUE		(1 << 6)	/* UART Unit Enable */
+#define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
+#define IER_RTIOE	(1 << 4)	/* Receiver Time Out Interrupt Enable */
+#define IER_MIE		(1 << 3)	/* Modem Interrupt Enable */
+#define IER_RLSE	(1 << 2)	/* Receiver Line Status Interrupt Enable */
+#define IER_TIE		(1 << 1)	/* Transmit Data request Interrupt Enable */
+#define IER_RAVIE	(1 << 0)	/* Receiver Data Available Interrupt Enable */
+
+#define IIR_FIFOES1	(1 << 7)	/* FIFO Mode Enable Status */
+#define IIR_FIFOES0	(1 << 6)	/* FIFO Mode Enable Status */
+#define IIR_TOD		(1 << 3)	/* Time Out Detected */
+#define IIR_IID2	(1 << 2)	/* Interrupt Source Encoded */
+#define IIR_IID1	(1 << 1)	/* Interrupt Source Encoded */
+#define IIR_IP		(1 << 0)	/* Interrupt Pending (active low) */
+
+#define FCR_ITL2	(1 << 7)	/* Interrupt Trigger Level */
+#define FCR_ITL1	(1 << 6)	/* Interrupt Trigger Level */
+#define FCR_RESETTF	(1 << 2)	/* Reset Transmitter FIFO */
+#define FCR_RESETRF	(1 << 1)	/* Reset Receiver FIFO */
+#define FCR_TRFIFOE	(1 << 0)	/* Transmit and Receive FIFO Enable */
+#define FCR_ITL_1	(0)
+#define FCR_ITL_8	(FCR_ITL1)
+#define FCR_ITL_16	(FCR_ITL2)
+#define FCR_ITL_32	(FCR_ITL2|FCR_ITL1)
+
+#define LCR_DLAB	(1 << 7)	/* Divisor Latch Access Bit */
+#define LCR_SB		(1 << 6)	/* Set Break */
+#define LCR_STKYP	(1 << 5)	/* Sticky Parity */
+#define LCR_EPS		(1 << 4)	/* Even Parity Select */
+#define LCR_PEN		(1 << 3)	/* Parity Enable */
+#define LCR_STB		(1 << 2)	/* Stop Bit */
+#define LCR_WLS1	(1 << 1)	/* Word Length Select */
+#define LCR_WLS0	(1 << 0)	/* Word Length Select */
+
+#define LSR_FIFOE	(1 << 7)	/* FIFO Error Status */
+#define LSR_TEMT	(1 << 6)	/* Transmitter Empty */
+#define LSR_TDRQ	(1 << 5)	/* Transmit Data Request */
+#define LSR_BI		(1 << 4)	/* Break Interrupt */
+#define LSR_FE		(1 << 3)	/* Framing Error */
+#define LSR_PE		(1 << 2)	/* Parity Error */
+#define LSR_OE		(1 << 1)	/* Overrun Error */
+#define LSR_DR		(1 << 0)	/* Data Ready */
+
+#define MCR_LOOP	(1 << 4)
+#define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
+#define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
+#define MCR_RTS		(1 << 1)	/* Request to Send */
+#define MCR_DTR		(1 << 0)	/* Data Terminal Ready */
+
+#define MSR_DCD		(1 << 7)	/* Data Carrier Detect */
+#define MSR_RI		(1 << 6)	/* Ring Indicator */
+#define MSR_DSR		(1 << 5)	/* Data Set Ready */
+#define MSR_CTS		(1 << 4)	/* Clear To Send */
+#define MSR_DDCD	(1 << 3)	/* Delta Data Carrier Detect */
+#define MSR_TERI	(1 << 2)	/* Trailing Edge Ring Indicator */
+#define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
+#define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */
+
+/*
+ * IrSR (Infrared Selection Register)
+ */
+#define STISR_RXPL      (1 << 4)        /* Receive Data Polarity */
+#define STISR_TXPL      (1 << 3)        /* Transmit Data Polarity */
+#define STISR_XMODE     (1 << 2)        /* Transmit Pulse Width Select */
+#define STISR_RCVEIR    (1 << 1)        /* Receiver SIR Enable */
+#define STISR_XMITIR    (1 << 0)        /* Transmitter SIR Enable */
+
+#endif /* __ASM_ARCH_REGS_UART_H */
diff --git a/arch/arm/mach-pxa/include/mach/timex.h b/arch/arm/mach-pxa/include/mach/timex.h
index b05fc66..af6760a 100644
--- a/arch/arm/mach-pxa/include/mach/timex.h
+++ b/arch/arm/mach-pxa/include/mach/timex.h
@@ -10,6 +10,14 @@
  * published by the Free Software Foundation.
  */
 
+/* Various drivers are still using the constant of CLOCK_TICK_RATE, for
+ * those drivers to at least work, the definition is provided here.
+ *
+ * NOTE: this is no longer accurate when multiple processors and boards
+ * are selected, newer drivers should not depend on this any more.  Use
+ * either the clocksource/clockevent or get this at run-time by calling
+ * get_clock_tick_rate() (as defined in generic.c).
+ */
 
 #if defined(CONFIG_PXA25x)
 /* PXA250/210 timer base */
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index 21e3e89..f4b029c 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -10,7 +10,7 @@
  */
 
 #include <linux/serial_reg.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-uart.h>
 #include <asm/mach-types.h>
 
 #define __REG(x)       ((volatile unsigned long *)x)
@@ -35,7 +35,7 @@ static inline void flush(void)
 
 static inline void arch_decomp_setup(void)
 {
-	if (machine_is_littleton())
+	if (machine_is_littleton() || machine_is_intelmote2())
 		UART = STUART;
 }
 
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index b4d00ab..31da7f3 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -20,8 +20,13 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/smc91x.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/mfd/da903x.h>
+#include <linux/i2c/max732x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -36,10 +41,10 @@
 
 #include <mach/pxa-regs.h>
 #include <mach/mfp-pxa300.h>
-#include <mach/gpio.h>
 #include <mach/pxafb.h>
 #include <mach/ssp.h>
 #include <mach/pxa2xx_spi.h>
+#include <mach/i2c.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa3xx_nand.h>
 #include <mach/littleton.h>
@@ -314,6 +319,73 @@ static void __init littleton_init_nand(void)
 static inline void littleton_init_nand(void) {}
 #endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
 
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct led_info littleton_da9034_leds[] = {
+	[0] = {
+		.name	= "littleton:keypad1",
+		.flags	= DA9034_LED_RAMP,
+	},
+	[1] = {
+		.name	= "littleton:keypad2",
+		.flags	= DA9034_LED_RAMP,
+	},
+	[2] = {
+		.name	= "littleton:vibra",
+		.flags	= 0,
+	},
+};
+
+static struct da903x_subdev_info littleton_da9034_subdevs[] = {
+	{
+		.name		= "da903x-led",
+		.id		= DA9034_ID_LED_1,
+		.platform_data	= &littleton_da9034_leds[0],
+	}, {
+		.name		= "da903x-led",
+		.id		= DA9034_ID_LED_2,
+		.platform_data	= &littleton_da9034_leds[1],
+	}, {
+		.name		= "da903x-led",
+		.id		= DA9034_ID_VIBRA,
+		.platform_data	= &littleton_da9034_leds[2],
+	}, {
+		.name		= "da903x-backlight",
+		.id		= DA9034_ID_WLED,
+	},
+};
+
+static struct da903x_platform_data littleton_da9034_info = {
+	.num_subdevs	= ARRAY_SIZE(littleton_da9034_subdevs),
+	.subdevs	= littleton_da9034_subdevs,
+};
+
+static struct max732x_platform_data littleton_max7320_info = {
+	.gpio_base	= EXT0_GPIO_BASE,
+};
+
+static struct i2c_board_info littleton_i2c_info[] = {
+	[0] = {
+		.type		= "da9034",
+		.addr		= 0x34,
+		.platform_data	= &littleton_da9034_info,
+		.irq		= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO18)),
+	},
+	[1] = {
+		.type		= "max7320",
+		.addr		= 0x50,
+		.platform_data	= &littleton_max7320_info,
+	},
+};
+
+static void __init littleton_init_i2c(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(littleton_i2c_info));
+}
+#else
+static inline void littleton_init_i2c(void) {}
+#endif /* CONFIG_I2C_PXA || CONFIG_I2C_PXA_MODULE */
+
 static void __init littleton_init(void)
 {
 	/* initialize MFP configurations */
@@ -326,6 +398,7 @@ static void __init littleton_init(void)
 	platform_device_register(&smc91x_device);
 
 	littleton_init_spi();
+	littleton_init_i2c();
 	littleton_init_lcd();
 	littleton_init_keypad();
 	littleton_init_nand();
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 519138b..21b821e 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -123,6 +123,10 @@ static unsigned long magician_pin_config[] __initdata = {
 	GPIO107_GPIO,	/* DS1WM_IRQ */
 	GPIO108_GPIO,	/* GSM_READY */
 	GPIO115_GPIO,	/* nPEN_IRQ */
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
 };
 
 /*
@@ -332,8 +336,7 @@ static struct pxafb_mach_info toppoly_info = {
 	.modes           = toppoly_modes,
 	.num_modes       = 1,
 	.fixed_modes     = 1,
-	.lccr0           = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3           = LCCR3_PixRsEdg,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
 	.pxafb_lcd_power = toppoly_lcd_power,
 };
 
@@ -341,8 +344,8 @@ static struct pxafb_mach_info samsung_info = {
 	.modes           = samsung_modes,
 	.num_modes       = 1,
 	.fixed_modes     = 1,
-	.lccr0           = LCCR0_LDDALT | LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3           = LCCR3_PixFlEdg,
+	.lcd_conn	 = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |\
+			   LCD_ALTERNATE_MAPPING,
 	.pxafb_lcd_power = samsung_lcd_power,
 };
 
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index f2c7ad8..5f22496 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -128,6 +128,10 @@ static unsigned long mainstone_pin_config[] = {
 	GPIO108_KP_MKOUT_5,
 	GPIO96_KP_MKOUT_6,
 
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
 	/* GPIO */
 	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
 };
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 2061c00..33626de 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -38,12 +38,13 @@ struct gpio_desc {
 	unsigned	valid		: 1;
 	unsigned	can_wakeup	: 1;
 	unsigned	keypad_gpio	: 1;
+	unsigned	dir_inverted	: 1;
 	unsigned int	mask; /* bit mask in PWER or PKWR */
+	unsigned int	mux_mask; /* bit mask of muxed gpio bits, 0 if no mux */
 	unsigned long	config;
 };
 
 static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
-static int gpio_nr;
 
 static unsigned long gpdr_lpm[4];
 
@@ -54,7 +55,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 	int uorl = !!(gpio & 0x10); /* GAFRx_U or GAFRx_L ? */
 	int shft = (gpio & 0xf) << 1;
 	int fn = MFP_AF(c);
-	int dir = c & MFP_DIR_OUT;
+	int is_out = (c & MFP_DIR_OUT) ? 1 : 0;
 
 	if (fn > 3)
 		return -EINVAL;
@@ -68,7 +69,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 	else
 		GAFR_U(bank) = gafr;
 
-	if (dir == MFP_DIR_OUT)
+	if (is_out ^ gpio_desc[gpio].dir_inverted)
 		GPDR(gpio) |= mask;
 	else
 		GPDR(gpio) &= ~mask;
@@ -77,11 +78,11 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 	switch (c & MFP_LPM_STATE_MASK) {
 	case MFP_LPM_DRIVE_HIGH:
 		PGSR(bank) |= mask;
-		dir = MFP_DIR_OUT;
+		is_out = 1;
 		break;
 	case MFP_LPM_DRIVE_LOW:
 		PGSR(bank) &= ~mask;
-		dir = MFP_DIR_OUT;
+		is_out = 1;
 		break;
 	case MFP_LPM_DEFAULT:
 		break;
@@ -92,7 +93,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 		break;
 	}
 
-	if (dir == MFP_DIR_OUT)
+	if (is_out ^ gpio_desc[gpio].dir_inverted)
 		gpdr_lpm[bank] |= mask;
 	else
 		gpdr_lpm[bank] &= ~mask;
@@ -106,7 +107,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 		return -EINVAL;
 	}
 
-	if ((c & MFP_LPM_CAN_WAKEUP) && (dir == MFP_DIR_OUT)) {
+	if ((c & MFP_LPM_CAN_WAKEUP) && is_out) {
 		pr_warning("%s: output GPIO%d unable to wakeup\n",
 				__func__, gpio);
 		return -EINVAL;
@@ -169,7 +170,7 @@ void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
 int gpio_set_wake(unsigned int gpio, unsigned int on)
 {
 	struct gpio_desc *d;
-	unsigned long c;
+	unsigned long c, mux_taken;
 
 	if (gpio > mfp_to_gpio(MFP_PIN_GPIO127))
 		return -EINVAL;
@@ -183,9 +184,13 @@ int gpio_set_wake(unsigned int gpio, unsigned int on)
 	if (d->keypad_gpio)
 		return -EINVAL;
 
+	mux_taken = (PWER & d->mux_mask) & (~d->mask);
+	if (on && mux_taken)
+		return -EBUSY;
+
 	if (d->can_wakeup && (c & MFP_LPM_CAN_WAKEUP)) {
 		if (on) {
-			PWER |= d->mask;
+			PWER = (PWER & ~d->mux_mask) | d->mask;
 
 			if (c & MFP_LPM_EDGE_RISE)
 				PRER |= d->mask;
@@ -210,7 +215,7 @@ static void __init pxa25x_mfp_init(void)
 {
 	int i;
 
-	for (i = 0; i <= 84; i++)
+	for (i = 0; i <= pxa_last_gpio; i++)
 		gpio_desc[i].valid = 1;
 
 	for (i = 0; i <= 15; i++) {
@@ -218,7 +223,11 @@ static void __init pxa25x_mfp_init(void)
 		gpio_desc[i].mask = GPIO_bit(i);
 	}
 
-	gpio_nr = 85;
+	/* PXA26x has additional 4 GPIOs (86/87/88/89) which has the
+	 * direction bit inverted in GPDR2. See PXA26x DM 4.1.1.
+	 */
+	for (i = 86; i <= pxa_last_gpio; i++)
+		gpio_desc[i].dir_inverted = 1;
 }
 #else
 static inline void pxa25x_mfp_init(void) {}
@@ -251,11 +260,27 @@ int keypad_set_wake(unsigned int on)
 	return 0;
 }
 
+#define PWER_WEMUX2_GPIO38	(1 << 16)
+#define PWER_WEMUX2_GPIO53	(2 << 16)
+#define PWER_WEMUX2_GPIO40	(3 << 16)
+#define PWER_WEMUX2_GPIO36	(4 << 16)
+#define PWER_WEMUX2_MASK	(7 << 16)
+#define PWER_WEMUX3_GPIO31	(1 << 19)
+#define PWER_WEMUX3_GPIO113	(2 << 19)
+#define PWER_WEMUX3_MASK	(3 << 19)
+
+#define INIT_GPIO_DESC_MUXED(mux, gpio)				\
+do {								\
+	gpio_desc[(gpio)].can_wakeup = 1;			\
+	gpio_desc[(gpio)].mask = PWER_ ## mux ## _GPIO ##gpio;	\
+	gpio_desc[(gpio)].mux_mask = PWER_ ## mux ## _MASK;	\
+} while (0)
+
 static void __init pxa27x_mfp_init(void)
 {
 	int i, gpio;
 
-	for (i = 0; i <= 120; i++) {
+	for (i = 0; i <= pxa_last_gpio; i++) {
 		/* skip GPIO2, 5, 6, 7, 8, they are not
 		 * valid pins allow configuration
 		 */
@@ -286,7 +311,12 @@ static void __init pxa27x_mfp_init(void)
 	gpio_desc[35].can_wakeup = 1;
 	gpio_desc[35].mask = PWER_WE35;
 
-	gpio_nr = 121;
+	INIT_GPIO_DESC_MUXED(WEMUX3, 31);
+	INIT_GPIO_DESC_MUXED(WEMUX3, 113);
+	INIT_GPIO_DESC_MUXED(WEMUX2, 38);
+	INIT_GPIO_DESC_MUXED(WEMUX2, 53);
+	INIT_GPIO_DESC_MUXED(WEMUX2, 40);
+	INIT_GPIO_DESC_MUXED(WEMUX2, 36);
 }
 #else
 static inline void pxa27x_mfp_init(void) {}
@@ -300,7 +330,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
 {
 	int i;
 
-	for (i = 0; i <= gpio_to_bank(gpio_nr); i++) {
+	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
 
 		saved_gafr[0][i] = GAFR_L(i);
 		saved_gafr[1][i] = GAFR_U(i);
@@ -315,7 +345,7 @@ static int pxa2xx_mfp_resume(struct sys_device *d)
 {
 	int i;
 
-	for (i = 0; i <= gpio_to_bank(gpio_nr); i++) {
+	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
 		GAFR_L(i) = saved_gafr[0][i];
 		GAFR_U(i) = saved_gafr[1][i];
 		GPDR(i * 32) = saved_gpdr[i];
@@ -348,7 +378,7 @@ static int __init pxa2xx_mfp_init(void)
 		pxa27x_mfp_init();
 
 	/* initialize gafr_run[], pgsr_lpm[] from existing values */
-	for (i = 0; i <= gpio_to_bank(gpio_nr); i++)
+	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
 		gpdr_lpm[i] = GPDR(i * 32);
 
 	return sysdev_class_register(&pxa2xx_mfp_sysclass);
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 782903f..2b427e0 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -34,7 +34,7 @@
 #include <linux/irq.h>
 #include <linux/pda_power.h>
 #include <linux/power_supply.h>
-#include <linux/wm97xx.h>
+#include <linux/wm97xx_batt.h>
 #include <linux/mtd/physmap.h>
 
 #include <asm/mach-types.h>
@@ -46,6 +46,9 @@
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/pxa27x-udc.h>
+#include <mach/i2c.h>
+#include <mach/camera.h>
+#include <media/soc_camera.h>
 
 #include <mach/mioa701.h>
 
@@ -54,10 +57,11 @@
 
 static unsigned long mioa701_pin_config[] = {
 	/* Mio global */
-	MIO_CFG_OUT(GPIO9_CHARGE_nEN, AF0, DRIVE_LOW),
+	MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW),
 	MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
 	MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
 	MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
+	MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0),
 
 	/* Backlight PWM 0 */
 	GPIO16_PWM0_OUT,
@@ -74,7 +78,7 @@ static unsigned long mioa701_pin_config[] = {
 	MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
 
 	/* USB */
-	MIO_CFG_IN(GPIO13_USB_DETECT, AF0),
+	MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0),
 	MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
 
 	/* LCD */
@@ -98,12 +102,29 @@ static unsigned long mioa701_pin_config[] = {
 	GPIO75_LCD_LCLK,
 	GPIO76_LCD_PCLK,
 
+	/* QCI */
+	GPIO12_CIF_DD_7,
+	GPIO17_CIF_DD_6,
+	GPIO50_CIF_DD_3,
+	GPIO51_CIF_DD_2,
+	GPIO52_CIF_DD_4,
+	GPIO53_CIF_MCLK,
+	GPIO54_CIF_PCLK,
+	GPIO55_CIF_DD_1,
+	GPIO81_CIF_DD_0,
+	GPIO82_CIF_DD_5,
+	GPIO84_CIF_FV,
+	GPIO85_CIF_LV,
+
 	/* Bluetooth */
+	MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
 	GPIO44_BTUART_CTS,
 	GPIO42_BTUART_RXD,
 	GPIO45_BTUART_RTS,
 	GPIO43_BTUART_TXD,
 	MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
+	MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH),
+	MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH),
 
 	/* GPS */
 	MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
@@ -151,16 +172,16 @@ static unsigned long mioa701_pin_config[] = {
 	GPIO104_KP_MKOUT_1,
 	GPIO105_KP_MKOUT_2,
 
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
 	/* Unknown */
-	MFP_CFG_IN(GPIO14, AF0),
 	MFP_CFG_IN(GPIO20, AF0),
 	MFP_CFG_IN(GPIO21, AF0),
 	MFP_CFG_IN(GPIO33, AF0),
 	MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
 	MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
-	MFP_CFG_OUT(GPIO77, AF0, DRIVE_HIGH),
-	MFP_CFG_IN(GPIO80, AF0),
-	MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH),
 	MFP_CFG_IN(GPIO96, AF0),
 	MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
 };
@@ -407,7 +428,7 @@ static void udc_power_command(int cmd)
 
 static int is_usb_connected(void)
 {
-	return !!gpio_get_value(GPIO13_USB_DETECT);
+	return !gpio_get_value(GPIO13_nUSB_DETECT);
 }
 
 static struct pxa2xx_udc_mach_info mioa701_udc_info = {
@@ -659,13 +680,19 @@ static char *supplicants[] = {
 	"mioa701_battery"
 };
 
+static int is_ac_connected(void)
+{
+	return gpio_get_value(GPIO96_AC_DETECT);
+}
+
 static void mioa701_set_charge(int flags)
 {
-	gpio_set_value(GPIO9_CHARGE_nEN, !flags);
+	gpio_set_value(GPIO9_CHARGE_EN, (flags == PDA_POWER_CHARGE_USB));
 }
 
 static struct pda_power_pdata power_pdata = {
-	.is_ac_online	= is_usb_connected,
+	.is_ac_online	= is_ac_connected,
+	.is_usb_online	= is_usb_connected,
 	.set_charge = mioa701_set_charge,
 	.supplied_to = supplicants,
 	.num_supplicants = ARRAY_SIZE(supplicants),
@@ -674,8 +701,15 @@ static struct pda_power_pdata power_pdata = {
 static struct resource power_resources[] = {
 	[0] = {
 		.name	= "ac",
-		.start	= gpio_to_irq(GPIO13_USB_DETECT),
-		.end	= gpio_to_irq(GPIO13_USB_DETECT),
+		.start	= gpio_to_irq(GPIO96_AC_DETECT),
+		.end	= gpio_to_irq(GPIO96_AC_DETECT),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+		IORESOURCE_IRQ_LOWEDGE,
+	},
+	[1] = {
+		.name	= "usb",
+		.start	= gpio_to_irq(GPIO13_nUSB_DETECT),
+		.end	= gpio_to_irq(GPIO13_nUSB_DETECT),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
 		IORESOURCE_IRQ_LOWEDGE,
 	},
@@ -691,120 +725,43 @@ static struct platform_device power_dev = {
 	},
 };
 
-#if defined(CONFIG_PDA_POWER) && defined(CONFIG_TOUCHSCREEN_WM97XX)
-static struct wm97xx *battery_wm;
-
-static enum power_supply_property battery_props[] = {
-	POWER_SUPPLY_PROP_STATUS,
-	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
-	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
-	POWER_SUPPLY_PROP_VOLTAGE_NOW,
-	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,	/* Necessary for apm */
+static struct wm97xx_batt_info mioa701_battery_data = {
+	.batt_aux	= WM97XX_AUX_ID1,
+	.temp_aux	= -1,
+	.charge_gpio	= -1,
+	.min_voltage	= 0xc00,
+	.max_voltage	= 0xfc0,
+	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LION,
+	.batt_div	= 1,
+	.batt_mult	= 1,
+	.batt_name	= "mioa701_battery",
 };
 
-static int get_battery_voltage(void)
-{
-	int adc = -1;
-
-	if (battery_wm)
-		adc = wm97xx_read_aux_adc(battery_wm, WM97XX_AUX_ID1);
-	return adc;
-}
-
-static int get_battery_status(struct power_supply *b)
-{
-	int status;
-
-	if (is_usb_connected())
-		status = POWER_SUPPLY_STATUS_CHARGING;
-	else
-		status = POWER_SUPPLY_STATUS_DISCHARGING;
-
-	return status;
-}
-
-static int get_property(struct power_supply *b,
-			enum power_supply_property psp,
-			union power_supply_propval *val)
-{
-	int rc = 0;
-
-	switch (psp) {
-	case POWER_SUPPLY_PROP_STATUS:
-		val->intval = get_battery_status(b);
-		break;
-	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
-		val->intval = 0xfd0;
-		break;
-	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
-		val->intval = 0xc00;
-		break;
-	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
-		val->intval = get_battery_voltage();
-		break;
-	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
-		val->intval = 100;
-		break;
-	default:
-		val->intval = -1;
-		rc = -1;
-	}
-
-	return rc;
+/*
+ * Camera interface
+ */
+struct pxacamera_platform_data mioa701_pxacamera_platform_data = {
+	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz = 5000,
 };
 
-static struct power_supply battery_ps = {
-	.name = "mioa701_battery",
-	.type = POWER_SUPPLY_TYPE_BATTERY,
-	.get_property = get_property,
-	.properties = battery_props,
-	.num_properties = ARRAY_SIZE(battery_props),
+static struct soc_camera_link iclink = {
+	.bus_id	= 0, /* Must match id in pxa27x_device_camera in device.c */
 };
 
-static int battery_probe(struct platform_device *pdev)
-{
-	struct wm97xx *wm = platform_get_drvdata(pdev);
-	int rc;
-
-	battery_wm = wm;
-
-	rc = power_supply_register(NULL, &battery_ps);
-	if (rc)
-		dev_err(&pdev->dev,
-		"Could not register mioa701 battery -> %d\n", rc);
-	return rc;
-}
-
-static int battery_remove(struct platform_device *pdev)
-{
-	battery_wm = NULL;
-	return 0;
-}
-
-static struct platform_driver mioa701_battery_driver = {
-	.driver = {
-		.name = "wm97xx-battery",
+/* Board I2C devices. */
+static struct i2c_board_info __initdata mioa701_i2c_devices[] = {
+	{
+		/* Must initialize before the camera(s) */
+		I2C_BOARD_INFO("mt9m111", 0x5d),
+		.platform_data = &iclink,
 	},
-	.probe = battery_probe,
-	.remove = battery_remove
 };
 
-static int __init mioa701_battery_init(void)
-{
-	int rc;
-
-	rc = platform_driver_register(&mioa701_battery_driver);
-	if (rc)
-		printk(KERN_ERR "Could not register mioa701 battery driver\n");
-	return rc;
-}
-
-#else
-static int __init mioa701_battery_init(void)
-{
-	return 0;
-}
-#endif
+struct i2c_pxa_platform_data i2c_pdata = {
+	.fast_mode = 1,
+};
 
 /*
  * Mio global
@@ -851,17 +808,17 @@ static void mioa701_machine_exit(void);
 static void mioa701_poweroff(void)
 {
 	mioa701_machine_exit();
-	gpio_set_value(GPIO18_POWEROFF, 1);
+	arm_machine_restart('s');
 }
 
 static void mioa701_restart(char c)
 {
 	mioa701_machine_exit();
-	arm_machine_restart(c);
+	arm_machine_restart('s');
 }
 
 struct gpio_ress global_gpios[] = {
-	MIO_GPIO_OUT(GPIO9_CHARGE_nEN, 1, "Charger enable"),
+	MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
 	MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
 	MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
 };
@@ -879,12 +836,16 @@ static void __init mioa701_machine_init(void)
 	set_pxa_fb_info(&mioa701_pxafb_info);
 	pxa_set_mci_info(&mioa701_mci_info);
 	pxa_set_keypad_info(&mioa701_keypad_info);
+	wm97xx_bat_set_pdata(&mioa701_battery_data);
 	udc_init();
 	pm_power_off = mioa701_poweroff;
 	arm_pm_restart = mioa701_restart;
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	gsm_init();
-	mioa701_battery_init();
+
+	pxa_set_i2c_info(&i2c_pdata);
+	pxa_set_camera_info(&mioa701_pxacamera_platform_data);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices));
 }
 
 static void mioa701_machine_exit(void)
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index b36cec5c..34841c7 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -55,6 +55,10 @@ static unsigned long pcm990_pin_config[] __initdata = {
 	GPIO89_USBH1_PEN,
 	/* PWM0 */
 	GPIO16_PWM0_OUT,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
 };
 
 /*
@@ -100,8 +104,7 @@ static struct pxafb_mode_info fb_info_sharp_lq084v1dg21 = {
 static struct pxafb_mach_info pcm990_fbinfo __initdata = {
 	.modes			= &fb_info_sharp_lq084v1dg21,
 	.num_modes		= 1,
-	.lccr0			= LCCR0_PAS,
-	.lccr3			= LCCR3_PCP,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 	.pxafb_lcd_power	= pcm990_lcd_power,
 };
 #elif defined(CONFIG_PCM990_DISPLAY_NEC)
@@ -123,8 +126,7 @@ struct pxafb_mode_info fb_info_nec_nl6448bc20_18d = {
 static struct pxafb_mach_info pcm990_fbinfo __initdata = {
 	.modes			= &fb_info_nec_nl6448bc20_18d,
 	.num_modes		= 1,
-	.lccr0			= LCCR0_Act,
-	.lccr3			= LCCR3_PixFlEdg,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 	.pxafb_lcd_power	= pcm990_lcd_power,
 };
 #endif
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 2e3bd8b..ae88855 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -20,6 +20,7 @@
 #include <linux/fb.h>
 #include <linux/pm.h>
 #include <linux/delay.h>
+#include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -413,9 +414,40 @@ static struct pxafb_mach_info poodle_fb_info = {
 	.lcd_conn	= LCD_COLOR_TFT_16BPP,
 };
 
+static struct mtd_partition sharpsl_rom_parts[] = {
+	{
+		.name	="Boot PROM Filesystem",
+		.offset	= 0x00120000,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data sharpsl_rom_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
+	.parts		= sharpsl_rom_parts,
+};
+
+static struct resource sharpsl_rom_resources[] = {
+	{
+		.start	= 0x00000000,
+		.end	= 0x007fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device sharpsl_rom_device = {
+	.name	= "physmap-flash",
+	.id	= -1,
+	.resource = sharpsl_rom_resources,
+	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
+	.dev.platform_data = &sharpsl_rom_data,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&poodle_locomo_device,
 	&poodle_scoop_device,
+	&sharpsl_rom_device,
 };
 
 static void poodle_poweroff(void)
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c
index 74e2ead..3ca7ffc6 100644
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/mach-pxa/pwm.c
@@ -173,7 +173,7 @@ static struct pwm_device *pwm_probe(struct platform_device *pdev,
 		return ERR_PTR(-ENOMEM);
 	}
 
-	pwm->clk = clk_get(&pdev->dev, "PWMCLK");
+	pwm->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(pwm->clk)) {
 		ret = PTR_ERR(pwm->clk);
 		goto err_free;
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 25d17a1..6c57522 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -36,12 +36,6 @@
 #include "devices.h"
 #include "clock.h"
 
-int cpu_is_pxa26x(void)
-{
-	return cpu_is_pxa250() && ((BOOT_DEF & 0x8) == 0);
-}
-EXPORT_SYMBOL_GPL(cpu_is_pxa26x);
-
 /*
  * Various clock factors driven by the CCCR register.
  */
@@ -167,36 +161,51 @@ static const struct clkops clk_pxa25x_gpio11_ops = {
  * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
  * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly)
  */
-static struct clk pxa25x_hwuart_clk =
-	INIT_CKEN("UARTCLK", HWUART, 14745600, 1, &pxa_device_hwuart.dev)
-;
+static DEFINE_CKEN(pxa25x_hwuart, HWUART, 14745600, 1);
+
+static struct clk_lookup pxa25x_hwuart_clkreg =
+	INIT_CLKREG(&clk_pxa25x_hwuart, "pxa2xx-uart.3", NULL);
 
 /*
  * PXA 2xx clock declarations.
  */
-static struct clk pxa25x_clks[] = {
-	INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev),
-	INIT_CKEN("UARTCLK", FFUART, 14745600, 1, &pxa_device_ffuart.dev),
-	INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
-	INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL),
-	INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa25x_device_udc.dev),
-	INIT_CLK("GPIO11_CLK", &clk_pxa25x_gpio11_ops, 3686400, 0, NULL),
-	INIT_CLK("GPIO12_CLK", &clk_pxa25x_gpio12_ops, 32768, 0, NULL),
-	INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
-	INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
-
-	INIT_CKEN("SSPCLK",  SSP, 3686400, 0, &pxa25x_device_ssp.dev),
-	INIT_CKEN("SSPCLK", NSSP, 3686400, 0, &pxa25x_device_nssp.dev),
-	INIT_CKEN("SSPCLK", ASSP, 3686400, 0, &pxa25x_device_assp.dev),
-	INIT_CKEN("PWMCLK", PWM0, 3686400, 0, &pxa25x_device_pwm0.dev),
-	INIT_CKEN("PWMCLK", PWM1, 3686400, 0, &pxa25x_device_pwm1.dev),
-
-	INIT_CKEN("AC97CLK",     AC97,     24576000, 0, NULL),
-
-	/*
-	INIT_CKEN("I2SCLK",  I2S,  14745600, 0, NULL),
-	*/
-	INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
+static DEFINE_CK(pxa25x_lcd, LCD, &clk_pxa25x_lcd_ops);
+static DEFINE_CKEN(pxa25x_ffuart, FFUART, 14745600, 1);
+static DEFINE_CKEN(pxa25x_btuart, BTUART, 14745600, 1);
+static DEFINE_CKEN(pxa25x_stuart, STUART, 14745600, 1);
+static DEFINE_CKEN(pxa25x_usb, USB, 47923000, 5);
+static DEFINE_CLK(pxa25x_gpio11, &clk_pxa25x_gpio11_ops, 3686400, 0);
+static DEFINE_CLK(pxa25x_gpio12, &clk_pxa25x_gpio12_ops, 32768, 0);
+static DEFINE_CKEN(pxa25x_mmc, MMC, 19169000, 0);
+static DEFINE_CKEN(pxa25x_i2c, I2C, 31949000, 0);
+static DEFINE_CKEN(pxa25x_ssp, SSP, 3686400, 0);
+static DEFINE_CKEN(pxa25x_nssp, NSSP, 3686400, 0);
+static DEFINE_CKEN(pxa25x_assp, ASSP, 3686400, 0);
+static DEFINE_CKEN(pxa25x_pwm0, PWM0, 3686400, 0);
+static DEFINE_CKEN(pxa25x_pwm1, PWM1, 3686400, 0);
+static DEFINE_CKEN(pxa25x_ac97, AC97, 24576000, 0);
+static DEFINE_CKEN(pxa25x_i2s, I2S, 14745600, 0);
+static DEFINE_CKEN(pxa25x_ficp, FICP, 47923000, 0);
+
+static struct clk_lookup pxa25x_clkregs[] = {
+	INIT_CLKREG(&clk_pxa25x_lcd, "pxa2xx-fb", NULL),
+	INIT_CLKREG(&clk_pxa25x_ffuart, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_pxa25x_btuart, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_pxa25x_stuart, "pxa2xx-uart.2", NULL),
+	INIT_CLKREG(&clk_pxa25x_usb, "pxa25x-udc", NULL),
+	INIT_CLKREG(&clk_pxa25x_mmc, "pxa2xx-mci.0", NULL),
+	INIT_CLKREG(&clk_pxa25x_i2c, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_pxa25x_ssp, "pxa25x-ssp.0", NULL),
+	INIT_CLKREG(&clk_pxa25x_nssp, "pxa25x-nssp.1", NULL),
+	INIT_CLKREG(&clk_pxa25x_assp, "pxa25x-nssp.2", NULL),
+	INIT_CLKREG(&clk_pxa25x_pwm0, "pxa25x-pwm.0", NULL),
+	INIT_CLKREG(&clk_pxa25x_pwm1, "pxa25x-pwm.1", NULL),
+	INIT_CLKREG(&clk_pxa25x_i2s, "pxa2xx-i2s", NULL),
+	INIT_CLKREG(&clk_pxa25x_stuart, "pxa2xx-ir", "UARTCLK"),
+	INIT_CLKREG(&clk_pxa25x_ficp, "pxa2xx-ir", "FICPCLK"),
+	INIT_CLKREG(&clk_pxa25x_ac97, NULL, "AC97CLK"),
+	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
+	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
 };
 
 #ifdef CONFIG_PM
@@ -304,13 +313,21 @@ void __init pxa25x_init_irq(void)
 	pxa_init_gpio(85, pxa25x_set_wake);
 }
 
+#ifdef CONFIG_CPU_PXA26x
+void __init pxa26x_init_irq(void)
+{
+	pxa_init_irq(32, pxa25x_set_wake);
+	pxa_init_gpio(90, pxa25x_set_wake);
+}
+#endif
+
 static struct platform_device *pxa25x_devices[] __initdata = {
 	&pxa25x_device_udc,
 	&pxa_device_ffuart,
 	&pxa_device_btuart,
 	&pxa_device_stuart,
 	&pxa_device_i2s,
-	&pxa_device_rtc,
+	&sa1100_device_rtc,
 	&pxa25x_device_ssp,
 	&pxa25x_device_nssp,
 	&pxa25x_device_assp,
@@ -336,7 +353,7 @@ static int __init pxa25x_init(void)
 
 		reset_status = RCSR;
 
-		clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks));
+		clks_register(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs));
 
 		if ((ret = pxa_init_dma(16)))
 			return ret;
@@ -356,8 +373,8 @@ static int __init pxa25x_init(void)
 	}
 
 	/* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
-	if (cpu_is_pxa255() || cpu_is_pxa26x()) {
-		clks_register(&pxa25x_hwuart_clk, 1);
+	if (cpu_is_pxa255()) {
+		clks_register(&pxa25x_hwuart_clkreg, 1);
 		ret = platform_device_register(&pxa_device_hwuart);
 	}
 
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 3e4ab22..411bec5 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -144,40 +144,59 @@ static const struct clkops clk_pxa27x_lcd_ops = {
 	.getrate	= clk_pxa27x_lcd_getrate,
 };
 
-static struct clk pxa27x_clks[] = {
-	INIT_CK("LCDCLK", LCD,    &clk_pxa27x_lcd_ops, &pxa_device_fb.dev),
-	INIT_CK("CAMCLK", CAMERA, &clk_pxa27x_lcd_ops, NULL),
-
-	INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev),
-	INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev),
-	INIT_CKEN("UARTCLK", STUART, 14857000, 1, NULL),
-
-	INIT_CKEN("I2SCLK",  I2S,  14682000, 0, &pxa_device_i2s.dev),
-	INIT_CKEN("I2CCLK",  I2C,  32842000, 0, &pxa_device_i2c.dev),
-	INIT_CKEN("UDCCLK",  USB,  48000000, 5, &pxa27x_device_udc.dev),
-	INIT_CKEN("MMCCLK",  MMC,  19500000, 0, &pxa_device_mci.dev),
-	INIT_CKEN("FICPCLK", FICP, 48000000, 0, &pxa_device_ficp.dev),
-
-	INIT_CKEN("USBCLK", USBHOST, 48000000, 0, &pxa27x_device_ohci.dev),
-	INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev),
-	INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, &pxa27x_device_keypad.dev),
-
-	INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
-	INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
-	INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
-	INIT_CKEN("PWMCLK", PWM0, 13000000, 0, &pxa27x_device_pwm0.dev),
-	INIT_CKEN("PWMCLK", PWM1, 13000000, 0, &pxa27x_device_pwm1.dev),
-
-	INIT_CKEN("AC97CLK",     AC97,     24576000, 0, NULL),
-	INIT_CKEN("AC97CONFCLK", AC97CONF, 24576000, 0, NULL),
-
-	/*
-	INIT_CKEN("MSLCLK",  MSL,  48000000, 0, NULL),
-	INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL),
-	INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL),
-	INIT_CKEN("IMCLK",   IM,   0, 0, NULL),
-	INIT_CKEN("MEMCLK",  MEMC, 0, 0, NULL),
-	*/
+static DEFINE_CK(pxa27x_lcd, LCD, &clk_pxa27x_lcd_ops);
+static DEFINE_CK(pxa27x_camera, CAMERA, &clk_pxa27x_lcd_ops);
+static DEFINE_CKEN(pxa27x_ffuart, FFUART, 14857000, 1);
+static DEFINE_CKEN(pxa27x_btuart, BTUART, 14857000, 1);
+static DEFINE_CKEN(pxa27x_stuart, STUART, 14857000, 1);
+static DEFINE_CKEN(pxa27x_i2s, I2S, 14682000, 0);
+static DEFINE_CKEN(pxa27x_i2c, I2C, 32842000, 0);
+static DEFINE_CKEN(pxa27x_usb, USB, 48000000, 5);
+static DEFINE_CKEN(pxa27x_mmc, MMC, 19500000, 0);
+static DEFINE_CKEN(pxa27x_ficp, FICP, 48000000, 0);
+static DEFINE_CKEN(pxa27x_usbhost, USBHOST, 48000000, 0);
+static DEFINE_CKEN(pxa27x_pwri2c, PWRI2C, 13000000, 0);
+static DEFINE_CKEN(pxa27x_keypad, KEYPAD, 32768, 0);
+static DEFINE_CKEN(pxa27x_ssp1, SSP1, 13000000, 0);
+static DEFINE_CKEN(pxa27x_ssp2, SSP2, 13000000, 0);
+static DEFINE_CKEN(pxa27x_ssp3, SSP3, 13000000, 0);
+static DEFINE_CKEN(pxa27x_pwm0, PWM0, 13000000, 0);
+static DEFINE_CKEN(pxa27x_pwm1, PWM1, 13000000, 0);
+static DEFINE_CKEN(pxa27x_ac97, AC97, 24576000, 0);
+static DEFINE_CKEN(pxa27x_ac97conf, AC97CONF, 24576000, 0);
+static DEFINE_CKEN(pxa27x_msl, MSL, 48000000, 0);
+static DEFINE_CKEN(pxa27x_usim, USIM, 48000000, 0);
+static DEFINE_CKEN(pxa27x_memstk, MEMSTK, 19500000, 0);
+static DEFINE_CKEN(pxa27x_im, IM, 0, 0);
+static DEFINE_CKEN(pxa27x_memc, MEMC, 0, 0);
+
+static struct clk_lookup pxa27x_clkregs[] = {
+	INIT_CLKREG(&clk_pxa27x_lcd, "pxa2xx-fb", NULL),
+	INIT_CLKREG(&clk_pxa27x_camera, "pxa27x-camera.0", NULL),
+	INIT_CLKREG(&clk_pxa27x_ffuart, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_pxa27x_btuart, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_pxa27x_stuart, "pxa2xx-uart.2", NULL),
+	INIT_CLKREG(&clk_pxa27x_i2s, "pxa2xx-i2s", NULL),
+	INIT_CLKREG(&clk_pxa27x_i2c, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_pxa27x_usb, "pxa27x-udc", NULL),
+	INIT_CLKREG(&clk_pxa27x_mmc, "pxa2xx-mci.0", NULL),
+	INIT_CLKREG(&clk_pxa27x_stuart, "pxa2xx-ir", "UARTCLK"),
+	INIT_CLKREG(&clk_pxa27x_ficp, "pxa2xx-ir", "FICPCLK"),
+	INIT_CLKREG(&clk_pxa27x_usbhost, "pxa27x-ohci", NULL),
+	INIT_CLKREG(&clk_pxa27x_pwri2c, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_pxa27x_keypad, "pxa27x-keypad", NULL),
+	INIT_CLKREG(&clk_pxa27x_ssp1, "pxa27x-ssp.0", NULL),
+	INIT_CLKREG(&clk_pxa27x_ssp2, "pxa27x-ssp.1", NULL),
+	INIT_CLKREG(&clk_pxa27x_ssp3, "pxa27x-ssp.2", NULL),
+	INIT_CLKREG(&clk_pxa27x_pwm0, "pxa27x-pwm.0", NULL),
+	INIT_CLKREG(&clk_pxa27x_pwm1, "pxa27x-pwm.1", NULL),
+	INIT_CLKREG(&clk_pxa27x_ac97, NULL, "AC97CLK"),
+	INIT_CLKREG(&clk_pxa27x_ac97conf, NULL, "AC97CONFCLK"),
+	INIT_CLKREG(&clk_pxa27x_msl, NULL, "MSLCLK"),
+	INIT_CLKREG(&clk_pxa27x_usim, NULL, "USIMCLK"),
+	INIT_CLKREG(&clk_pxa27x_memstk, NULL, "MSTKCLK"),
+	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
+	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
 };
 
 #ifdef CONFIG_PM
@@ -313,38 +332,18 @@ static int pxa27x_set_wake(unsigned int irq, unsigned int on)
 void __init pxa27x_init_irq(void)
 {
 	pxa_init_irq(34, pxa27x_set_wake);
-	pxa_init_gpio(128, pxa27x_set_wake);
+	pxa_init_gpio(121, pxa27x_set_wake);
 }
 
 /*
  * device registration specific to PXA27x.
  */
-
-static struct resource i2c_power_resources[] = {
-	{
-		.start	= 0x40f00180,
-		.end	= 0x40f001a3,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PWRI2C,
-		.end	= IRQ_PWRI2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa27x_device_i2c_power = {
-	.name		= "pxa2xx-i2c",
-	.id		= 1,
-	.resource	= i2c_power_resources,
-	.num_resources	= ARRAY_SIZE(i2c_power_resources),
-};
-
 void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 {
 	local_irq_disable();
 	PCFR |= PCFR_PI2CEN;
 	local_irq_enable();
-	pxa27x_device_i2c_power.dev.platform_data = info;
+	pxa_register_device(&pxa27x_device_i2c_power, info);
 }
 
 static struct platform_device *devices[] __initdata = {
@@ -353,8 +352,8 @@ static struct platform_device *devices[] __initdata = {
 	&pxa_device_btuart,
 	&pxa_device_stuart,
 	&pxa_device_i2s,
+	&sa1100_device_rtc,
 	&pxa_device_rtc,
-	&pxa27x_device_i2c_power,
 	&pxa27x_device_ssp1,
 	&pxa27x_device_ssp2,
 	&pxa27x_device_ssp3,
@@ -380,7 +379,7 @@ static int __init pxa27x_init(void)
 
 		reset_status = RCSR;
 
-		clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks));
+		clks_register(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs));
 
 		if ((ret = pxa_init_dma(32)))
 			return ret;
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 9adc7fc..f735e58 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -85,14 +85,16 @@ static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
 	MFP_ADDR_END,
 };
 
-static struct clk common_clks[] = {
-	PXA3xx_CKEN("NANDCLK", NAND, 156000000, 0, &pxa3xx_device_nand.dev),
+static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0);
+
+static struct clk_lookup common_clkregs[] = {
+	INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", "NANDCLK"),
 };
 
-static struct clk pxa310_clks[] = {
-#ifdef CONFIG_CPU_PXA310
-	PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
-#endif
+static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);
+
+static struct clk_lookup pxa310_clkregs[] = {
+	INIT_CLKREG(&clk_pxa310_mmc3, "pxa2xx-mci.2", "MMCCLK"),
 };
 
 static int __init pxa300_init(void)
@@ -100,12 +102,12 @@ static int __init pxa300_init(void)
 	if (cpu_is_pxa300() || cpu_is_pxa310()) {
 		pxa3xx_init_mfp();
 		pxa3xx_mfp_init_addr(pxa300_mfp_addr_map);
-		clks_register(ARRAY_AND_SIZE(common_clks));
+		clks_register(ARRAY_AND_SIZE(common_clkregs));
 	}
 
 	if (cpu_is_pxa310()) {
 		pxa3xx_mfp_init_addr(pxa310_mfp_addr_map);
-		clks_register(ARRAY_AND_SIZE(pxa310_clks));
+		clks_register(ARRAY_AND_SIZE(pxa310_clkregs));
 	}
 
 	return 0;
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 016eb18..effe408 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -80,8 +80,10 @@ static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 	MFP_ADDR_END,
 };
 
-static struct clk pxa320_clks[] = {
-	PXA3xx_CKEN("NANDCLK", NAND, 104000000, 0, &pxa3xx_device_nand.dev),
+static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0);
+
+static struct clk_lookup pxa320_clkregs[] = {
+	INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", "NANDCLK"),
 };
 
 static int __init pxa320_init(void)
@@ -89,7 +91,7 @@ static int __init pxa320_init(void)
 	if (cpu_is_pxa320()) {
 		pxa3xx_init_mfp();
 		pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
-		clks_register(ARRAY_AND_SIZE(pxa320_clks));
+		clks_register(ARRAY_AND_SIZE(pxa320_clkregs));
 	}
 
 	return 0;
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index b3cd5d0..4908938 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -29,6 +29,7 @@
 #include <mach/pm.h>
 #include <mach/dma.h>
 #include <mach/ssp.h>
+#include <mach/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -216,43 +217,58 @@ static const struct clkops clk_dummy_ops = {
 	.disable	= clk_dummy_disable,
 };
 
-static struct clk pxa3xx_clks[] = {
-	{
-		.name           = "CLK_POUT",
-		.ops            = &clk_pout_ops,
-		.rate           = 13000000,
-		.delay          = 70,
-	},
-
-	/* Power I2C clock is always on */
-	{
-		.name		= "I2CCLK",
-		.ops		= &clk_dummy_ops,
-		.dev		= &pxa3xx_device_i2c_power.dev,
-	},
-
-	PXA3xx_CK("LCDCLK",  LCD,    &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev),
-	PXA3xx_CK("CAMCLK",  CAMERA, &clk_pxa3xx_hsio_ops, NULL),
-	PXA3xx_CK("AC97CLK", AC97,   &clk_pxa3xx_ac97_ops, NULL),
-
-	PXA3xx_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev),
-	PXA3xx_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev),
-	PXA3xx_CKEN("UARTCLK", STUART, 14857000, 1, NULL),
-
-	PXA3xx_CKEN("I2CCLK", I2C,  32842000, 0, &pxa_device_i2c.dev),
-	PXA3xx_CKEN("UDCCLK", UDC,  48000000, 5, &pxa27x_device_udc.dev),
-	PXA3xx_CKEN("USBCLK", USBH, 48000000, 0, &pxa27x_device_ohci.dev),
-	PXA3xx_CKEN("KBDCLK", KEYPAD,  32768, 0, &pxa27x_device_keypad.dev),
+static struct clk clk_pxa3xx_pout = {
+	.ops		= &clk_pout_ops,
+	.rate		= 13000000,
+	.delay		= 70,
+};
 
-	PXA3xx_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
-	PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
-	PXA3xx_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
-	PXA3xx_CKEN("SSPCLK", SSP4, 13000000, 0, &pxa3xx_device_ssp4.dev),
-	PXA3xx_CKEN("PWMCLK", PWM0, 13000000, 0, &pxa27x_device_pwm0.dev),
-	PXA3xx_CKEN("PWMCLK", PWM1, 13000000, 0, &pxa27x_device_pwm1.dev),
+static struct clk clk_dummy = {
+	.ops		= &clk_dummy_ops,
+};
 
-	PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev),
-	PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev),
+static DEFINE_PXA3_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops);
+static DEFINE_PXA3_CK(pxa3xx_camera, CAMERA, &clk_pxa3xx_hsio_ops);
+static DEFINE_PXA3_CK(pxa3xx_ac97, AC97, &clk_pxa3xx_ac97_ops);
+static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1);
+static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1);
+static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1);
+static DEFINE_PXA3_CKEN(pxa3xx_i2c, I2C, 32842000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_udc, UDC, 48000000, 5);
+static DEFINE_PXA3_CKEN(pxa3xx_usbh, USBH, 48000000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_keypad, KEYPAD, 32768, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_ssp1, SSP1, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_ssp2, SSP2, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_ssp3, SSP3, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_ssp4, SSP4, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_pwm0, PWM0, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_pwm1, PWM1, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_mmc1, MMC1, 19500000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
+
+static struct clk_lookup pxa3xx_clkregs[] = {
+	INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
+	/* Power I2C clock is always on */
+	INIT_CLKREG(&clk_dummy, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
+	INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
+	INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),
+	INIT_CLKREG(&clk_pxa3xx_ffuart, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_pxa3xx_btuart, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-uart.2", NULL),
+	INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-ir", "UARTCLK"),
+	INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL),
+	INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL),
+	INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL),
+	INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa27x-ssp.0", NULL),
+	INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa27x-ssp.1", NULL),
+	INIT_CLKREG(&clk_pxa3xx_ssp3, "pxa27x-ssp.2", NULL),
+	INIT_CLKREG(&clk_pxa3xx_ssp4, "pxa27x-ssp.3", NULL),
+	INIT_CLKREG(&clk_pxa3xx_pwm0, "pxa27x-pwm.0", NULL),
+	INIT_CLKREG(&clk_pxa3xx_pwm1, "pxa27x-pwm.1", NULL),
+	INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL),
+	INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL),
 };
 
 #ifdef CONFIG_PM
@@ -529,28 +545,9 @@ void __init pxa3xx_init_irq(void)
  * device registration specific to PXA3xx.
  */
 
-static struct resource i2c_power_resources[] = {
-	{
-		.start  = 0x40f500c0,
-		.end    = 0x40f500d3,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PWRI2C,
-		.end	= IRQ_PWRI2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa3xx_device_i2c_power = {
-	.name		= "pxa2xx-i2c",
-	.id		= 1,
-	.resource	= i2c_power_resources,
-	.num_resources	= ARRAY_SIZE(i2c_power_resources),
-};
-
 void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 {
-	pxa3xx_device_i2c_power.dev.platform_data = info;
+	pxa_register_device(&pxa3xx_device_i2c_power, info);
 }
 
 static struct platform_device *devices[] __initdata = {
@@ -559,6 +556,7 @@ static struct platform_device *devices[] __initdata = {
 	&pxa_device_btuart,
 	&pxa_device_stuart,
 	&pxa_device_i2s,
+	&sa1100_device_rtc,
 	&pxa_device_rtc,
 	&pxa27x_device_ssp1,
 	&pxa27x_device_ssp2,
@@ -566,7 +564,6 @@ static struct platform_device *devices[] __initdata = {
 	&pxa3xx_device_ssp4,
 	&pxa27x_device_pwm0,
 	&pxa27x_device_pwm1,
-	&pxa3xx_device_i2c_power,
 };
 
 static struct sys_device pxa3xx_sysdev[] = {
@@ -595,7 +592,7 @@ static int __init pxa3xx_init(void)
 		 */
 		ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
 
-		clks_register(pxa3xx_clks, ARRAY_SIZE(pxa3xx_clks));
+		clks_register(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs));
 
 		if ((ret = pxa_init_dma(32)))
 			return ret;
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index e7ea91c..5d02a73 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -17,19 +17,44 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/i2c.h>
 #include <linux/smc91x.h>
+#include <linux/mfd/da903x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/hardware.h>
 #include <mach/pxa3xx-regs.h>
 #include <mach/mfp-pxa930.h>
+#include <mach/i2c.h>
+#include <mach/regs-lcd.h>
+#include <mach/pxafb.h>
 
 #include "devices.h"
 #include "generic.h"
 
+#define GPIO_LCD_RESET	(16)
+
 /* SAAR MFP configurations */
 static mfp_cfg_t saar_mfp_cfg[] __initdata = {
+	/* LCD */
+	GPIO23_LCD_DD0,
+	GPIO24_LCD_DD1,
+	GPIO25_LCD_DD2,
+	GPIO26_LCD_DD3,
+	GPIO27_LCD_DD4,
+	GPIO28_LCD_DD5,
+	GPIO29_LCD_DD6,
+	GPIO44_LCD_DD7,
+	GPIO21_LCD_CS,
+	GPIO22_LCD_VSYNC,
+	GPIO17_LCD_FCLK_RD,
+	GPIO18_LCD_LCLK_A0,
+	GPIO19_LCD_PCLK_WR,
+	GPIO16_GPIO, /* LCD reset */
+
 	/* Ethernet */
 	DF_nCS1_nCS3,
 	GPIO97_GPIO,
@@ -64,12 +89,408 @@ static struct platform_device smc91x_device = {
 	},
 };
 
+#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULE)
+static uint16_t lcd_power_on[] = {
+	/* single frame */
+	SMART_CMD_NOOP,
+	SMART_CMD(0x00),
+	SMART_DELAY(0),
+
+	SMART_CMD_NOOP,
+	SMART_CMD(0x00),
+	SMART_DELAY(0),
+
+	SMART_CMD_NOOP,
+	SMART_CMD(0x00),
+	SMART_DELAY(0),
+
+	SMART_CMD_NOOP,
+	SMART_CMD(0x00),
+	SMART_DELAY(10),
+
+	/* calibration control */
+	SMART_CMD(0x00),
+	SMART_CMD(0xA4),
+	SMART_DAT(0x80),
+	SMART_DAT(0x01),
+	SMART_DELAY(150),
+
+	/*Power-On Init sequence*/
+	SMART_CMD(0x00),	/* output ctrl */
+	SMART_CMD(0x01),
+	SMART_DAT(0x01),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00),	/* wave ctrl */
+	SMART_CMD(0x02),
+	SMART_DAT(0x07),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00),
+	SMART_CMD(0x03),	/* entry mode */
+	SMART_DAT(0xD0),
+	SMART_DAT(0x30),
+	SMART_CMD(0x00),
+	SMART_CMD(0x08),	/* display ctrl 2 */
+	SMART_DAT(0x08),
+	SMART_DAT(0x08),
+	SMART_CMD(0x00),
+	SMART_CMD(0x09),	/* display ctrl 3 */
+	SMART_DAT(0x04),
+	SMART_DAT(0x2F),
+	SMART_CMD(0x00),
+	SMART_CMD(0x0A),	/* display ctrl 4 */
+	SMART_DAT(0x00),
+	SMART_DAT(0x08),
+	SMART_CMD(0x00),
+	SMART_CMD(0x0D),	/* Frame Marker position */
+	SMART_DAT(0x00),
+	SMART_DAT(0x08),
+	SMART_CMD(0x00),
+	SMART_CMD(0x60),	/* Driver output control */
+	SMART_DAT(0x27),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00),
+	SMART_CMD(0x61),	/* Base image display control */
+	SMART_DAT(0x00),
+	SMART_DAT(0x01),
+	SMART_CMD(0x00),
+	SMART_CMD(0x30),	/* Y settings 30h-3Dh */
+	SMART_DAT(0x07),
+	SMART_DAT(0x07),
+	SMART_CMD(0x00),
+	SMART_CMD(0x31),
+	SMART_DAT(0x00),
+	SMART_DAT(0x07),
+	SMART_CMD(0x00),
+	SMART_CMD(0x32),	/* Timing(3), ASW HOLD=0.5CLK */
+	SMART_DAT(0x04),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00),
+	SMART_CMD(0x33),	/* Timing(4), CKV ST=0CLK, CKV ED=1CLK */
+	SMART_DAT(0x03),
+	SMART_DAT(0x03),
+	SMART_CMD(0x00),
+	SMART_CMD(0x34),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00),
+	SMART_CMD(0x35),
+	SMART_DAT(0x02),
+	SMART_DAT(0x05),
+	SMART_CMD(0x00),
+	SMART_CMD(0x36),
+	SMART_DAT(0x1F),
+	SMART_DAT(0x1F),
+	SMART_CMD(0x00),
+	SMART_CMD(0x37),
+	SMART_DAT(0x07),
+	SMART_DAT(0x07),
+	SMART_CMD(0x00),
+	SMART_CMD(0x38),
+	SMART_DAT(0x00),
+	SMART_DAT(0x07),
+	SMART_CMD(0x00),
+	SMART_CMD(0x39),
+	SMART_DAT(0x04),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00),
+	SMART_CMD(0x3A),
+	SMART_DAT(0x03),
+	SMART_DAT(0x03),
+	SMART_CMD(0x00),
+	SMART_CMD(0x3B),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00),
+	SMART_CMD(0x3C),
+	SMART_DAT(0x02),
+	SMART_DAT(0x05),
+	SMART_CMD(0x00),
+	SMART_CMD(0x3D),
+	SMART_DAT(0x1F),
+	SMART_DAT(0x1F),
+	SMART_CMD(0x00),	/* Display control 1 */
+	SMART_CMD(0x07),
+	SMART_DAT(0x00),
+	SMART_DAT(0x01),
+	SMART_CMD(0x00),	/* Power control 5 */
+	SMART_CMD(0x17),
+	SMART_DAT(0x00),
+	SMART_DAT(0x01),
+	SMART_CMD(0x00),	/* Power control 1 */
+	SMART_CMD(0x10),
+	SMART_DAT(0x10),
+	SMART_DAT(0xB0),
+	SMART_CMD(0x00),	/* Power control 2 */
+	SMART_CMD(0x11),
+	SMART_DAT(0x01),
+	SMART_DAT(0x30),
+	SMART_CMD(0x00),	/* Power control 3 */
+	SMART_CMD(0x12),
+	SMART_DAT(0x01),
+	SMART_DAT(0x9E),
+	SMART_CMD(0x00),	/* Power control 4 */
+	SMART_CMD(0x13),
+	SMART_DAT(0x17),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00),	/* Power control 3 */
+	SMART_CMD(0x12),
+	SMART_DAT(0x01),
+	SMART_DAT(0xBE),
+	SMART_DELAY(100),
+
+	/* display mode : 240*320 */
+	SMART_CMD(0x00),	/* RAM address set(H) 0*/
+	SMART_CMD(0x20),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00),	/* RAM address set(V)   4*/
+	SMART_CMD(0x21),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00),	/* Start of Window RAM address set(H) 8*/
+	SMART_CMD(0x50),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00), 	/* End of Window RAM address set(H) 12*/
+	SMART_CMD(0x51),
+	SMART_DAT(0x00),
+	SMART_DAT(0xEF),
+	SMART_CMD(0x00),	/* Start of Window RAM address set(V) 16*/
+	SMART_CMD(0x52),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00),	/* End of Window RAM address set(V) 20*/
+	SMART_CMD(0x53),
+	SMART_DAT(0x01),
+	SMART_DAT(0x3F),
+	SMART_CMD(0x00), 	/* Panel interface control 1 */
+	SMART_CMD(0x90),
+	SMART_DAT(0x00),
+	SMART_DAT(0x1A),
+	SMART_CMD(0x00), 	/* Panel interface control 2 */
+	SMART_CMD(0x92),
+	SMART_DAT(0x04),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00), 	/* Panel interface control 3 */
+	SMART_CMD(0x93),
+	SMART_DAT(0x00),
+	SMART_DAT(0x05),
+	SMART_DELAY(20),
+};
+
+static uint16_t lcd_panel_on[] = {
+	SMART_CMD(0x00),
+	SMART_CMD(0x07),
+	SMART_DAT(0x00),
+	SMART_DAT(0x21),
+	SMART_DELAY(1),
+
+	SMART_CMD(0x00),
+	SMART_CMD(0x07),
+	SMART_DAT(0x00),
+	SMART_DAT(0x61),
+	SMART_DELAY(100),
+
+	SMART_CMD(0x00),
+	SMART_CMD(0x07),
+	SMART_DAT(0x01),
+	SMART_DAT(0x73),
+	SMART_DELAY(1),
+};
+
+static uint16_t lcd_panel_off[] = {
+	SMART_CMD(0x00),
+	SMART_CMD(0x07),
+	SMART_DAT(0x00),
+	SMART_DAT(0x72),
+	SMART_DELAY(40),
+
+	SMART_CMD(0x00),
+	SMART_CMD(0x07),
+	SMART_DAT(0x00),
+	SMART_DAT(0x01),
+	SMART_DELAY(1),
+
+	SMART_CMD(0x00),
+	SMART_CMD(0x07),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_DELAY(1),
+};
+
+static uint16_t lcd_power_off[] = {
+	SMART_CMD(0x00),
+	SMART_CMD(0x10),
+	SMART_DAT(0x00),
+	SMART_DAT(0x80),
+
+	SMART_CMD(0x00),
+	SMART_CMD(0x11),
+	SMART_DAT(0x01),
+	SMART_DAT(0x60),
+
+	SMART_CMD(0x00),
+	SMART_CMD(0x12),
+	SMART_DAT(0x01),
+	SMART_DAT(0xAE),
+	SMART_DELAY(40),
+
+	SMART_CMD(0x00),
+	SMART_CMD(0x10),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+};
+
+static uint16_t update_framedata[] = {
+	/* set display ram: 240*320 */
+	SMART_CMD(0x00), /* RAM address set(H) 0*/
+	SMART_CMD(0x20),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00), /* RAM address set(V) 4*/
+	SMART_CMD(0x21),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00), /* Start of Window RAM address set(H) 8 */
+	SMART_CMD(0x50),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00), /* End of Window RAM address set(H) 12 */
+	SMART_CMD(0x51),
+	SMART_DAT(0x00),
+	SMART_DAT(0xEF),
+	SMART_CMD(0x00), /* Start of Window RAM address set(V) 16 */
+	SMART_CMD(0x52),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00), /* End of Window RAM address set(V) 20 */
+	SMART_CMD(0x53),
+	SMART_DAT(0x01),
+	SMART_DAT(0x3F),
+
+	/* wait for vsync cmd before transferring frame data */
+	SMART_CMD_WAIT_FOR_VSYNC,
+
+	/* write ram */
+	SMART_CMD(0x00),
+	SMART_CMD(0x22),
+
+	/* write frame data */
+	SMART_CMD_WRITE_FRAME,
+};
+
+static void ltm022a97a_lcd_power(int on, struct fb_var_screeninfo *var)
+{
+	static int pin_requested = 0;
+	struct fb_info *info = container_of(var, struct fb_info, var);
+	int err;
+
+	if (!pin_requested) {
+		err = gpio_request(GPIO_LCD_RESET, "lcd reset");
+		if (err) {
+			pr_err("failed to request gpio for LCD reset\n");
+			return;
+		}
+
+		gpio_direction_output(GPIO_LCD_RESET, 0);
+		pin_requested = 1;
+	}
+
+	if (on) {
+		gpio_set_value(GPIO_LCD_RESET, 0); msleep(100);
+		gpio_set_value(GPIO_LCD_RESET, 1); msleep(10);
+
+		pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_on));
+		pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_on));
+	} else {
+		pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_off));
+		pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_off));
+	}
+
+	err = pxafb_smart_flush(info);
+	if (err)
+		pr_err("%s: timed out\n", __func__);
+}
+
+static void ltm022a97a_update(struct fb_info *info)
+{
+	pxafb_smart_queue(info, ARRAY_AND_SIZE(update_framedata));
+	pxafb_smart_flush(info);
+}
+
+static struct pxafb_mode_info toshiba_ltm022a97a_modes[] = {
+	[0] = {
+		.xres			= 240,
+		.yres			= 320,
+		.bpp			= 16,
+		.a0csrd_set_hld		= 30,
+		.a0cswr_set_hld		= 30,
+		.wr_pulse_width		= 30,
+		.rd_pulse_width 	= 30,
+		.op_hold_time 		= 30,
+		.cmd_inh_time		= 60,
+
+		/* L_LCLK_A0 and L_LCLK_RD active low */
+		.sync			= FB_SYNC_HOR_HIGH_ACT |
+					  FB_SYNC_VERT_HIGH_ACT,
+	},
+};
+
+static struct pxafb_mach_info saar_lcd_info = {
+	.modes			= toshiba_ltm022a97a_modes,
+	.num_modes		= 1,
+	.lcd_conn		= LCD_SMART_PANEL_8BPP | LCD_PCLK_EDGE_FALL,
+	.pxafb_lcd_power	= ltm022a97a_lcd_power,
+	.smart_update		= ltm022a97a_update,
+};
+
+static void __init saar_init_lcd(void)
+{
+	set_pxa_fb_info(&saar_lcd_info);
+}
+#else
+static inline void saar_init_lcd(void) {}
+#endif
+
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct da903x_subdev_info saar_da9034_subdevs[] = {
+	[0] = {
+		.name		= "da903x-backlight",
+		.id		= DA9034_ID_WLED,
+	},
+};
+
+static struct da903x_platform_data saar_da9034_info = {
+	.num_subdevs	= ARRAY_SIZE(saar_da9034_subdevs),
+	.subdevs	= saar_da9034_subdevs,
+};
+
+static struct i2c_board_info saar_i2c_info[] = {
+	[0] = {
+		.type		= "da9034",
+		.addr		= 0x34,
+		.platform_data	= &saar_da9034_info,
+		.irq		= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+	},
+};
+
+static void __init saar_init_i2c(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(saar_i2c_info));
+}
+#else
+static inline void saar_init_i2c(void) {}
+#endif
 static void __init saar_init(void)
 {
 	/* initialize MFP configurations */
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
 
 	platform_device_register(&smc91x_device);
+
+	saar_init_i2c();
+	saar_init_lcd();
 }
 
 MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c
index ad346ad..d6f6904 100644
--- a/arch/arm/mach-pxa/smemc.c
+++ b/arch/arm/mach-pxa/smemc.c
@@ -8,6 +8,8 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 
+#include <mach/hardware.h>
+
 #define SMEMC_PHYS_BASE	(0x4A000000)
 #define SMEMC_PHYS_SIZE	(0x90)
 
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 3be76ee..7299d87 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -22,6 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <linux/mmc/host.h>
+#include <linux/mtd/physmap.h>
 #include <linux/pm.h>
 #include <linux/backlight.h>
 #include <linux/io.h>
@@ -122,6 +123,10 @@ static unsigned long spitz_pin_config[] __initdata = {
 	GPIO105_GPIO,	/* SPITZ_GPIO_CF_IRQ */
 	GPIO106_GPIO,	/* SPITZ_GPIO_CF2_IRQ */
 
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
 	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
 };
 
@@ -609,10 +614,41 @@ static struct pxafb_mach_info spitz_pxafb_info = {
 };
 
 
+static struct mtd_partition sharpsl_rom_parts[] = {
+	{
+		.name	="Boot PROM Filesystem",
+		.offset	= 0x00140000,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data sharpsl_rom_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
+	.parts		= sharpsl_rom_parts,
+};
+
+static struct resource sharpsl_rom_resources[] = {
+	{
+		.start	= 0x00000000,
+		.end	= 0x007fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device sharpsl_rom_device = {
+	.name	= "physmap-flash",
+	.id	= -1,
+	.resource = sharpsl_rom_resources,
+	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
+	.dev.platform_data = &sharpsl_rom_data,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&spitzscoop_device,
 	&spitzkbd_device,
 	&spitzled_device,
+	&sharpsl_rom_device,
 };
 
 static void spitz_poweroff(void)
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 2c31ec7..6f42004 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -356,7 +356,7 @@ static int __devinit ssp_probe(struct platform_device *pdev, int type)
 	}
 	ssp->pdev = pdev;
 
-	ssp->clk = clk_get(&pdev->dev, "SSPCLK");
+	ssp->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(ssp->clk)) {
 		ret = PTR_ERR(ssp->clk);
 		goto err_free;
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 589d32b..58ef08a 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -18,12 +18,15 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/smc91x.h>
+#include <linux/pwm_backlight.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/hardware.h>
 #include <mach/pxa3xx-regs.h>
 #include <mach/mfp-pxa930.h>
+#include <mach/pxafb.h>
+#include <mach/pxa27x_keypad.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -33,6 +36,45 @@ static mfp_cfg_t tavorevb_mfp_cfg[] __initdata = {
 	/* Ethernet */
 	DF_nCS1_nCS3,
 	GPIO47_GPIO,
+
+	/* LCD */
+	GPIO23_LCD_DD0,
+	GPIO24_LCD_DD1,
+	GPIO25_LCD_DD2,
+	GPIO26_LCD_DD3,
+	GPIO27_LCD_DD4,
+	GPIO28_LCD_DD5,
+	GPIO29_LCD_DD6,
+	GPIO44_LCD_DD7,
+	GPIO21_LCD_CS,
+	GPIO22_LCD_CS2,
+
+	GPIO17_LCD_FCLK_RD,
+	GPIO18_LCD_LCLK_A0,
+	GPIO19_LCD_PCLK_WR,
+
+	/* LCD Backlight */
+	GPIO43_PWM3,	/* primary backlight */
+	GPIO32_PWM0,	/* secondary backlight */
+
+	/* Keypad */
+	GPIO0_KP_MKIN_0,
+	GPIO2_KP_MKIN_1,
+	GPIO4_KP_MKIN_2,
+	GPIO6_KP_MKIN_3,
+	GPIO8_KP_MKIN_4,
+	GPIO10_KP_MKIN_5,
+	GPIO12_KP_MKIN_6,
+	GPIO1_KP_MKOUT_0,
+	GPIO3_KP_MKOUT_1,
+	GPIO5_KP_MKOUT_2,
+	GPIO7_KP_MKOUT_3,
+	GPIO9_KP_MKOUT_4,
+	GPIO11_KP_MKOUT_5,
+	GPIO13_KP_MKOUT_6,
+
+	GPIO14_KP_DKIN_2,
+	GPIO15_KP_DKIN_3,
 };
 
 #define TAVOREVB_ETH_PHYS	(0x14000000)
@@ -64,12 +106,382 @@ static struct platform_device smc91x_device = {
 	},
 };
 
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static unsigned int tavorevb_matrix_key_map[] = {
+	/* KEY(row, col, key_code) */
+	KEY(0, 4, KEY_A), KEY(0, 5, KEY_B), KEY(0, 6, KEY_C),
+	KEY(1, 4, KEY_E), KEY(1, 5, KEY_F), KEY(1, 6, KEY_G),
+	KEY(2, 4, KEY_I), KEY(2, 5, KEY_J), KEY(2, 6, KEY_K),
+	KEY(3, 4, KEY_M), KEY(3, 5, KEY_N), KEY(3, 6, KEY_O),
+	KEY(4, 5, KEY_R), KEY(4, 6, KEY_S),
+	KEY(5, 4, KEY_U), KEY(5, 4, KEY_V), KEY(5, 6, KEY_W),
+
+	KEY(6, 4, KEY_Y), KEY(6, 5, KEY_Z),
+
+	KEY(0, 3, KEY_0), KEY(2, 0, KEY_1), KEY(2, 1, KEY_2), KEY(2, 2, KEY_3),
+	KEY(2, 3, KEY_4), KEY(1, 0, KEY_5), KEY(1, 1, KEY_6), KEY(1, 2, KEY_7),
+	KEY(1, 3, KEY_8), KEY(0, 2, KEY_9),
+
+	KEY(6, 6, KEY_SPACE),
+	KEY(0, 0, KEY_KPASTERISK), 	/* * */
+	KEY(0, 1, KEY_KPDOT), 		/* # */
+
+	KEY(4, 1, KEY_UP),
+	KEY(4, 3, KEY_DOWN),
+	KEY(4, 0, KEY_LEFT),
+	KEY(4, 2, KEY_RIGHT),
+	KEY(6, 0, KEY_HOME),
+	KEY(3, 2, KEY_END),
+	KEY(6, 1, KEY_DELETE),
+	KEY(5, 2, KEY_BACK),
+	KEY(6, 3, KEY_CAPSLOCK),	/* KEY_LEFTSHIFT), */
+
+	KEY(4, 4, KEY_ENTER),		/* scroll push */
+	KEY(6, 2, KEY_ENTER),		/* keypad action */
+
+	KEY(3, 1, KEY_SEND),
+	KEY(5, 3, KEY_RECORD),
+	KEY(5, 0, KEY_VOLUMEUP),
+	KEY(5, 1, KEY_VOLUMEDOWN),
+
+	KEY(3, 0, KEY_F22),	/* soft1 */
+	KEY(3, 3, KEY_F23),	/* soft2 */
+};
+
+static struct pxa27x_keypad_platform_data tavorevb_keypad_info = {
+	.matrix_key_rows	= 7,
+	.matrix_key_cols	= 7,
+	.matrix_key_map		= tavorevb_matrix_key_map,
+	.matrix_key_map_size	= ARRAY_SIZE(tavorevb_matrix_key_map),
+	.debounce_interval	= 30,
+};
+
+static void __init tavorevb_init_keypad(void)
+{
+	pxa_set_keypad_info(&tavorevb_keypad_info);
+}
+#else
+static inline void tavorevb_init_keypad(void) {}
+#endif /* CONFIG_KEYBOARD_PXA27x || CONFIG_KEYBOARD_PXA27x_MODULE */
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct platform_pwm_backlight_data tavorevb_backlight_data[] = {
+	[0] = {
+		/* primary backlight */
+		.pwm_id		= 2,
+		.max_brightness	= 100,
+		.dft_brightness	= 100,
+		.pwm_period_ns	= 100000,
+	},
+	[1] = {
+		/* secondary backlight */
+		.pwm_id		= 0,
+		.max_brightness	= 100,
+		.dft_brightness	= 100,
+		.pwm_period_ns	= 100000,
+	},
+};
+
+static struct platform_device tavorevb_backlight_devices[] = {
+	[0] = {
+		.name		= "pwm-backlight",
+		.id		= 0,
+		.dev		= {
+			.platform_data = &tavorevb_backlight_data[0],
+		},
+	},
+	[1] = {
+		.name		= "pwm-backlight",
+		.id		= 1,
+		.dev		= {
+			.platform_data = &tavorevb_backlight_data[1],
+		},
+	},
+};
+
+static uint16_t panel_init[] = {
+	/* DSTB OUT */
+	SMART_CMD(0x00),
+	SMART_CMD_NOOP,
+	SMART_DELAY(1),
+
+	SMART_CMD(0x00),
+	SMART_CMD_NOOP,
+	SMART_DELAY(1),
+
+	SMART_CMD(0x00),
+	SMART_CMD_NOOP,
+	SMART_DELAY(1),
+
+	/* STB OUT */
+	SMART_CMD(0x00),
+	SMART_CMD(0x1D),
+	SMART_DAT(0x00),
+	SMART_DAT(0x05),
+	SMART_DELAY(1),
+
+	/* P-ON Init sequence */
+	SMART_CMD(0x00), /* OSC ON */
+	SMART_CMD(0x00),
+	SMART_DAT(0x00),
+	SMART_DAT(0x01),
+	SMART_CMD(0x00),
+	SMART_CMD(0x01), /* SOURCE DRIVER SHIFT DIRECTION and display RAM setting */
+	SMART_DAT(0x01),
+	SMART_DAT(0x27),
+	SMART_CMD(0x00),
+	SMART_CMD(0x02), /* LINE INV */
+	SMART_DAT(0x02),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00),
+	SMART_CMD(0x03), /* IF mode(1) */
+	SMART_DAT(0x01), /* 8bit smart mode(8-8),high speed write mode */
+	SMART_DAT(0x30),
+	SMART_CMD(0x07),
+	SMART_CMD(0x00), /* RAM Write Mode */
+	SMART_DAT(0x00),
+	SMART_DAT(0x03),
+	SMART_CMD(0x00),
+
+	/* DISPLAY Setting,  262K, fixed(NO scroll), no split screen */
+	SMART_CMD(0x07),
+	SMART_DAT(0x40), /* 16/18/19 BPP */
+	SMART_DAT(0x00),
+	SMART_CMD(0x00),
+	SMART_CMD(0x08), /* BP, FP Seting, BP=2H, FP=3H */
+	SMART_DAT(0x03),
+	SMART_DAT(0x02),
+	SMART_CMD(0x00),
+	SMART_CMD(0x0C), /* IF mode(2), using internal clock & MPU */
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00),
+	SMART_CMD(0x0D), /* Frame setting, 1Min. Frequence, 16CLK */
+	SMART_DAT(0x00),
+	SMART_DAT(0x10),
+	SMART_CMD(0x00),
+	SMART_CMD(0x12), /* Timing(1),ASW W=4CLK, ASW ST=1CLK */
+	SMART_DAT(0x03),
+	SMART_DAT(0x02),
+	SMART_CMD(0x00),
+	SMART_CMD(0x13), /* Timing(2),OEV ST=0.5CLK, OEV ED=1CLK */
+	SMART_DAT(0x01),
+	SMART_DAT(0x02),
+	SMART_CMD(0x00),
+	SMART_CMD(0x14), /* Timing(3), ASW HOLD=0.5CLK */
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00),
+	SMART_CMD(0x15), /* Timing(4), CKV ST=0CLK, CKV ED=1CLK */
+	SMART_DAT(0x20),
+	SMART_DAT(0x00),
+	SMART_CMD(0x00),
+	SMART_CMD(0x1C),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x03),
+	SMART_CMD(0x00),
+	SMART_DAT(0x04),
+	SMART_DAT(0x03),
+	SMART_CMD(0x03),
+	SMART_CMD(0x01),
+	SMART_DAT(0x03),
+	SMART_DAT(0x04),
+	SMART_CMD(0x03),
+	SMART_CMD(0x02),
+	SMART_DAT(0x04),
+	SMART_DAT(0x03),
+	SMART_CMD(0x03),
+	SMART_CMD(0x03),
+	SMART_DAT(0x03),
+	SMART_DAT(0x03),
+	SMART_CMD(0x03),
+	SMART_CMD(0x04),
+	SMART_DAT(0x01),
+	SMART_DAT(0x01),
+	SMART_CMD(0x03),
+	SMART_CMD(0x05),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x04),
+	SMART_CMD(0x02),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x04),
+	SMART_CMD(0x03),
+	SMART_DAT(0x01),
+	SMART_DAT(0x3F),
+	SMART_DELAY(0),
+
+	/* DISP RAM setting: 240*320 */
+	SMART_CMD(0x04), /* HADDR, START 0 */
+	SMART_CMD(0x06),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00), /* x1,3 */
+	SMART_CMD(0x04), /* HADDR,  END   4 */
+	SMART_CMD(0x07),
+	SMART_DAT(0x00),
+	SMART_DAT(0xEF), /* x2, 7 */
+	SMART_CMD(0x04), /* VADDR, START 8 */
+	SMART_CMD(0x08),
+	SMART_DAT(0x00), /* y1, 10 */
+	SMART_DAT(0x00), /* y1, 11 */
+	SMART_CMD(0x04), /* VADDR, END 12 */
+	SMART_CMD(0x09),
+	SMART_DAT(0x01), /* y2, 14 */
+	SMART_DAT(0x3F), /* y2, 15 */
+	SMART_CMD(0x02), /* RAM ADDR SETTING 16 */
+	SMART_CMD(0x00),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00), /* x1, 19 */
+	SMART_CMD(0x02), /* RAM ADDR SETTING 20 */
+	SMART_CMD(0x01),
+	SMART_DAT(0x00), /* y1, 22 */
+	SMART_DAT(0x00), /* y1, 23 */
+};
+
+static uint16_t panel_on[] = {
+	/* Power-IC ON */
+	SMART_CMD(0x01),
+	SMART_CMD(0x02),
+	SMART_DAT(0x07),
+	SMART_DAT(0x7D),
+	SMART_CMD(0x01),
+	SMART_CMD(0x03),
+	SMART_DAT(0x00),
+	SMART_DAT(0x05),
+	SMART_CMD(0x01),
+	SMART_CMD(0x04),
+	SMART_DAT(0x00),
+	SMART_DAT(0x00),
+	SMART_CMD(0x01),
+	SMART_CMD(0x05),
+	SMART_DAT(0x00),
+	SMART_DAT(0x15),
+	SMART_CMD(0x01),
+	SMART_CMD(0x00),
+	SMART_DAT(0xC0),
+	SMART_DAT(0x10),
+	SMART_DELAY(30),
+
+	/* DISP ON */
+	SMART_CMD(0x01),
+	SMART_CMD(0x01),
+	SMART_DAT(0x00),
+	SMART_DAT(0x01),
+	SMART_CMD(0x01),
+	SMART_CMD(0x00),
+	SMART_DAT(0xFF),
+	SMART_DAT(0xFE),
+	SMART_DELAY(150),
+};
+
+static uint16_t panel_off[] = {
+	SMART_CMD(0x00),
+	SMART_CMD(0x1E),
+	SMART_DAT(0x00),
+	SMART_DAT(0x0A),
+	SMART_CMD(0x01),
+	SMART_CMD(0x00),
+	SMART_DAT(0xFF),
+	SMART_DAT(0xEE),
+	SMART_CMD(0x01),
+	SMART_CMD(0x00),
+	SMART_DAT(0xF8),
+	SMART_DAT(0x12),
+	SMART_CMD(0x01),
+	SMART_CMD(0x00),
+	SMART_DAT(0xE8),
+	SMART_DAT(0x11),
+	SMART_CMD(0x01),
+	SMART_CMD(0x00),
+	SMART_DAT(0xC0),
+	SMART_DAT(0x11),
+	SMART_CMD(0x01),
+	SMART_CMD(0x00),
+	SMART_DAT(0x40),
+	SMART_DAT(0x11),
+	SMART_CMD(0x01),
+	SMART_CMD(0x00),
+	SMART_DAT(0x00),
+	SMART_DAT(0x10),
+};
+
+static uint16_t update_framedata[] = {
+	/* write ram */
+	SMART_CMD(0x02),
+	SMART_CMD(0x02),
+
+	/* write frame data */
+	SMART_CMD_WRITE_FRAME,
+};
+
+static void ltm020d550_lcd_power(int on, struct fb_var_screeninfo *var)
+{
+	struct fb_info *info = container_of(var, struct fb_info, var);
+
+	if (on) {
+		pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_init));
+		pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_on));
+	} else {
+		pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_off));
+	}
+
+	if (pxafb_smart_flush(info))
+		pr_err("%s: timed out\n", __func__);
+}
+
+static void ltm020d550_update(struct fb_info *info)
+{
+	pxafb_smart_queue(info, ARRAY_AND_SIZE(update_framedata));
+	pxafb_smart_flush(info);
+}
+
+static struct pxafb_mode_info toshiba_ltm020d550_modes[] = {
+	[0] = {
+		.xres			= 240,
+		.yres			= 320,
+		.bpp			= 16,
+		.a0csrd_set_hld		= 30,
+		.a0cswr_set_hld		= 30,
+		.wr_pulse_width		= 30,
+		.rd_pulse_width 	= 170,
+		.op_hold_time 		= 30,
+		.cmd_inh_time		= 60,
+
+		/* L_LCLK_A0 and L_LCLK_RD active low */
+		.sync			= FB_SYNC_HOR_HIGH_ACT |
+					  FB_SYNC_VERT_HIGH_ACT,
+	},
+};
+
+static struct pxafb_mach_info tavorevb_lcd_info = {
+	.modes			= toshiba_ltm020d550_modes,
+	.num_modes		= 1,
+	.lcd_conn		= LCD_SMART_PANEL_8BPP | LCD_PCLK_EDGE_FALL,
+	.pxafb_lcd_power	= ltm020d550_lcd_power,
+	.smart_update		= ltm020d550_update,
+};
+
+static void __init tavorevb_init_lcd(void)
+{
+	platform_device_register(&tavorevb_backlight_devices[0]);
+	platform_device_register(&tavorevb_backlight_devices[1]);
+	set_pxa_fb_info(&tavorevb_lcd_info);
+}
+#else
+static inline void tavorevb_init_lcd(void) {}
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
+
 static void __init tavorevb_init(void)
 {
 	/* initialize MFP configurations */
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
 
 	platform_device_register(&smc91x_device);
+
+	tavorevb_init_lcd();
+	tavorevb_init_keypad();
 }
 
 MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index f8a9a62..0016241 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -22,8 +22,8 @@
 #include <asm/div64.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
+#include <mach/hardware.h>
 #include <mach/pxa-regs.h>
-#include <asm/mach-types.h>
 
 /*
  * This is PXA's sched_clock implementation. This has a resolution
@@ -150,18 +150,11 @@ static struct irqaction pxa_ost0_irq = {
 
 static void __init pxa_timer_init(void)
 {
-	unsigned long clock_tick_rate;
+	unsigned long clock_tick_rate = get_clock_tick_rate();
 
 	OIER = 0;
 	OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
 
-	if (cpu_is_pxa25x())
-		clock_tick_rate = 3686400;
-	else if (machine_is_mainstone())
-		clock_tick_rate = 3249600;
-	else
-		clock_tick_rate = 3250000;
-
 	set_oscr2ns_scale(clock_tick_rate);
 
 	ckevt_pxa_osmr0.mult =
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 224897a..3332e5d 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -25,6 +25,7 @@
 #include <linux/mfd/tmio.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/pm.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
@@ -733,6 +734,45 @@ static void tosa_tc6393xb_teardown(struct platform_device *dev)
 	gpio_free(TOSA_GPIO_CARD_VCC_ON);
 }
 
+#ifdef CONFIG_MFD_TC6393XB
+static struct fb_videomode tosa_tc6393xb_lcd_mode[] = {
+	{
+		.xres = 480,
+		.yres = 640,
+		.pixclock = 0x002cdf00,/* PLL divisor */
+		.left_margin = 0x004c,
+		.right_margin = 0x005b,
+		.upper_margin = 0x0001,
+		.lower_margin = 0x000d,
+		.hsync_len = 0x0002,
+		.vsync_len = 0x0001,
+		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode = FB_VMODE_NONINTERLACED,
+	},{
+		.xres = 240,
+		.yres = 320,
+		.pixclock = 0x00e7f203,/* PLL divisor */
+		.left_margin = 0x0024,
+		.right_margin = 0x002f,
+		.upper_margin = 0x0001,
+		.lower_margin = 0x000d,
+		.hsync_len = 0x0002,
+		.vsync_len = 0x0001,
+		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode = FB_VMODE_NONINTERLACED,
+	}
+};
+
+static struct tmio_fb_data tosa_tc6393xb_fb_config = {
+	.lcd_set_power	= tc6393xb_lcd_set_power,
+	.lcd_mode	= tc6393xb_lcd_mode,
+	.num_modes	= ARRAY_SIZE(tosa_tc6393xb_lcd_mode),
+	.modes		= &tosa_tc6393xb_lcd_mode[0],
+	.height		= 82,
+	.width		= 60,
+};
+#endif
+
 static struct tc6393xb_platform_data tosa_tc6393xb_data = {
 	.scr_pll2cr	= 0x0cc1,
 	.scr_gper	= 0x3300,
@@ -748,6 +788,9 @@ static struct tc6393xb_platform_data tosa_tc6393xb_data = {
 	.resume		= tosa_tc6393xb_resume,
 
 	.nand_data	= &tosa_tc6393xb_nand_config,
+#ifdef CONFIG_MFD_TC6393XB
+	.fb_data	= &tosa_tc6393xb_fb_config,
+#endif
 
 	.resume_restore = 1,
 };
@@ -789,6 +832,36 @@ static struct spi_board_info spi_board_info[] __initdata = {
 	},
 };
 
+static struct mtd_partition sharpsl_rom_parts[] = {
+	{
+		.name	="Boot PROM Filesystem",
+		.offset	= 0x00160000,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data sharpsl_rom_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
+	.parts		= sharpsl_rom_parts,
+};
+
+static struct resource sharpsl_rom_resources[] = {
+	{
+		.start	= 0x00000000,
+		.end	= 0x007fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device sharpsl_rom_device = {
+	.name	= "physmap-flash",
+	.id	= -1,
+	.resource = sharpsl_rom_resources,
+	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
+	.dev.platform_data = &sharpsl_rom_data,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&tosascoop_device,
 	&tosascoop_jc_device,
@@ -798,6 +871,7 @@ static struct platform_device *devices[] __initdata = {
 	&tosa_gpio_keys_device,
 	&tosaled_device,
 	&tosa_bt_device,
+	&sharpsl_rom_device,
 };
 
 static void tosa_poweroff(void)
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 8138044..218d200 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -18,6 +18,7 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 #include <linux/pwm_backlight.h>
 #include <linux/smc91x.h>
 
@@ -25,7 +26,6 @@
 #include <asm/mach/arch.h>
 #include <mach/hardware.h>
 #include <mach/audio.h>
-#include <mach/gpio.h>
 #include <mach/pxafb.h>
 #include <mach/zylonite.h>
 #include <mach/mmc.h>
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 0f24474..28e4e62 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -16,8 +16,8 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 
-#include <mach/gpio.h>
 #include <mach/mfp-pxa320.h>
 #include <mach/zylonite.h>