diff options
author | Eric Miao <eric.miao@marvell.com> | 2009-01-20 12:06:01 +0800 |
---|---|---|
committer | Eric Miao <eric.miao@marvell.com> | 2009-03-23 10:11:31 +0800 |
commit | bd5ce4332328c1fe473690a86b2e6a4157be038f (patch) | |
tree | 785aa105d3752b2df92b1792e799e3f39e1b0411 /arch/arm/mach-pxa/include | |
parent | e2bb5befd7b0ae2d045f4413a97db52340edec13 (diff) | |
download | op-kernel-dev-bd5ce4332328c1fe473690a86b2e6a4157be038f.zip op-kernel-dev-bd5ce4332328c1fe473690a86b2e6a4157be038f.tar.gz |
[ARM] pxa: introduce plat-pxa for PXA common code and add DMA support
1. introduce folder of 'arch/arm/plat-pxa' for common code across different
PXA processor families
2. initially moved DMA code into plat-pxa
3. common code in <mach/dma.h> moved into <plat/dma.h>, new processors
should implement its own <mach/dma.h>, provide the following required
definitions and '#include <plat/dma.h>' in the end:
- DMAC_REGS_VIRT for mapped virtual address of the DMA registers'
physical I/O memory
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Diffstat (limited to 'arch/arm/mach-pxa/include')
-rw-r--r-- | arch/arm/mach-pxa/include/mach/dma.h | 83 |
1 files changed, 1 insertions, 82 deletions
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h index b0812f5..5bd5589 100644 --- a/arch/arm/mach-pxa/include/mach/dma.h +++ b/arch/arm/mach-pxa/include/mach/dma.h @@ -16,87 +16,6 @@ /* DMA Controller Registers Definitions */ #define DMAC_REGS_VIRT io_p2v(0x40000000) -#define DMAC_REG(x) (*((volatile u32 *)(DMAC_REGS_VIRT + (x)))) - -#define DCSR(n) DMAC_REG((n) << 2) -#define DALGN DMAC_REG(0x00a0) /* DMA Alignment Register */ -#define DINT DMAC_REG(0x00f0) /* DMA Interrupt Register */ -#define DDADR(n) DMAC_REG(0x0200 + ((n) << 4)) -#define DSADR(n) DMAC_REG(0x0204 + ((n) << 4)) -#define DTADR(n) DMAC_REG(0x0208 + ((n) << 4)) -#define DCMD(n) DMAC_REG(0x020c + ((n) << 4)) -#define DRCMR(n) DMAC_REG((((n) < 64) ? 0x0100 : 0x1100) + \ - (((n) & 0x3f) << 2)) - -#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ -#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ -#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ -#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ -#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ -#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ -#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ -#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ - -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) -#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ -#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ -#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ -#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ -#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ -#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ -#define DCSR_EORINTR (1 << 9) /* The end of Receive */ -#endif - -#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ -#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */ - -#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ -#define DDADR_STOP (1 << 0) /* Stop (read / write) */ - -#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ -#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ -#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ -#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ -#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ -#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ -#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ -#define DCMD_BURST8 (1 << 16) /* 8 byte burst */ -#define DCMD_BURST16 (2 << 16) /* 16 byte burst */ -#define DCMD_BURST32 (3 << 16) /* 32 byte burst */ -#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ -#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ -#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ -#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ - -/* - * Descriptor structure for PXA's DMA engine - * Note: this structure must always be aligned to a 16-byte boundary. - */ - -typedef struct pxa_dma_desc { - volatile u32 ddadr; /* Points to the next descriptor + flags */ - volatile u32 dsadr; /* DSADR value for the current transfer */ - volatile u32 dtadr; /* DTADR value for the current transfer */ - volatile u32 dcmd; /* DCMD value for the current transfer */ -} pxa_dma_desc; - -typedef enum { - DMA_PRIO_HIGH = 0, - DMA_PRIO_MEDIUM = 1, - DMA_PRIO_LOW = 2 -} pxa_dma_prio; - -/* - * DMA registration - */ - -int __init pxa_init_dma(int irq, int num_ch); - -int pxa_request_dma (char *name, - pxa_dma_prio prio, - void (*irq_handler)(int, void *), - void *data); - -void pxa_free_dma (int dma_ch); +#include <plat/dma.h> #endif /* _ASM_ARCH_DMA_H */ |