rtc: sa1100: declare irq in resource

Avoid to hard coded irq in rtc-sa1100 driver since we could share
it among arch-sa1100/arch-pxa/arch-mmp.

We still keep hard coded register address since the requirement is
enabling both rtc-sa1100 and rtc-pxa driver. The register addresses
are conflict since they're only two wrappers on the same rtc device.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 23 insertions, 5 deletions

diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 5bc1312..84f2d701 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -406,20 +406,17 @@ static struct resource pxa_rtc_resources[] = {
 	[1] = {
 		.start  = IRQ_RTC1Hz,
 		.end    = IRQ_RTC1Hz,
+		.name	= "rtc 1Hz",
 		.flags  = IORESOURCE_IRQ,
 	},
 	[2] = {
 		.start  = IRQ_RTCAlrm,
 		.end    = IRQ_RTCAlrm,
+		.name	= "rtc alarm",
 		.flags  = IORESOURCE_IRQ,
 	},
 };
 
-struct platform_device sa1100_device_rtc = {
-	.name		= "sa1100-rtc",
-	.id		= -1,
-};
-
 struct platform_device pxa_device_rtc = {
 	.name		= "pxa-rtc",
 	.id		= -1,
@@ -427,6 +424,27 @@ struct platform_device pxa_device_rtc = {
 	.resource       = pxa_rtc_resources,
 };
 
+static struct resource sa1100_rtc_resources[] = {
+	{
+		.start  = IRQ_RTC1Hz,
+		.end    = IRQ_RTC1Hz,
+		.name	= "rtc 1Hz",
+		.flags  = IORESOURCE_IRQ,
+	}, {
+		.start  = IRQ_RTCAlrm,
+		.end    = IRQ_RTCAlrm,
+		.name	= "rtc alarm",
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device sa1100_device_rtc = {
+	.name		= "sa1100-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(sa1100_rtc_resources),
+	.resource	= sa1100_rtc_resources,
+};
+
 static struct resource pxa_ac97_resources[] = {
 	[0] = {
 		.start  = 0x40500000,