summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-orion5x
diff options
context:
space:
mode:
authorLennert Buytenhek <buytenh@wantstofly.org>2009-03-20 09:52:09 +0000
committerDavid S. Miller <davem@davemloft.net>2009-03-21 19:06:54 -0700
commite84665c9cb4db963393fafad6fefe5efdd7e4a09 (patch)
tree545c4a2a63a77b853e3f34609d86b346fe61baf4 /arch/arm/mach-orion5x
parent076d3e10a54caa2c148de5732c126c7a31381d48 (diff)
downloadop-kernel-dev-e84665c9cb4db963393fafad6fefe5efdd7e4a09.zip
op-kernel-dev-e84665c9cb4db963393fafad6fefe5efdd7e4a09.tar.gz
dsa: add switch chip cascading support
The initial version of the DSA driver only supported a single switch chip per network interface, while DSA-capable switch chips can be interconnected to form a tree of switch chips. This patch adds support for multiple switch chips on a network interface. An example topology for a 16-port device with an embedded CPU is as follows: +-----+ +--------+ +--------+ | |eth0 10| switch |9 10| switch | | CPU +----------+ +-------+ | | | | chip 0 | | chip 1 | +-----+ +---++---+ +---++---+ || || || || ||1000baseT ||1000baseT ||ports 1-8 ||ports 9-16 This requires a couple of interdependent changes in the DSA layer: - The dsa platform driver data needs to be extended: there is still only one netdevice per DSA driver instance (eth0 in the example above), but each of the switch chips in the tree needs its own mii_bus device pointer, MII management bus address, and port name array. (include/net/dsa.h) The existing in-tree dsa users need some small changes to deal with this. (arch/arm) - The DSA and Ethertype DSA tagging modules need to be extended to use the DSA device ID field on receive and demultiplex the packet accordingly, and fill in the DSA device ID field on transmit according to which switch chip the packet is heading to. (net/dsa/tag_{dsa,edsa}.c) - The concept of "CPU port", which is the switch chip port that the CPU is connected to (port 10 on switch chip 0 in the example), needs to be extended with the concept of "upstream port", which is the port on the switch chip that will bring us one hop closer to the CPU (port 10 for both switch chips in the example above). - The dsa platform data needs to specify which ports on which switch chips are links to other switch chips, so that we can enable DSA tagging mode on them. (For inter-switch links, we always use non-EtherType DSA tagging, since it has lower overhead. The CPU link uses dsa or edsa tagging depending on what the 'root' switch chip supports.) This is done by specifying "dsa" for the given port in the port array. - The dsa platform data needs to be extended with information on via which port to reach any given switch chip from any given switch chip. This info is specified via the per-switch chip data struct ->rtable[] array, which gives the nexthop ports for each of the other switches in the tree. For the example topology above, the dsa platform data would look something like this: static struct dsa_chip_data sw[2] = { { .mii_bus = &foo, .sw_addr = 1, .port_names[0] = "p1", .port_names[1] = "p2", .port_names[2] = "p3", .port_names[3] = "p4", .port_names[4] = "p5", .port_names[5] = "p6", .port_names[6] = "p7", .port_names[7] = "p8", .port_names[9] = "dsa", .port_names[10] = "cpu", .rtable = (s8 []){ -1, 9, }, }, { .mii_bus = &foo, .sw_addr = 2, .port_names[0] = "p9", .port_names[1] = "p10", .port_names[2] = "p11", .port_names[3] = "p12", .port_names[4] = "p13", .port_names[5] = "p14", .port_names[6] = "p15", .port_names[7] = "p16", .port_names[10] = "dsa", .rtable = (s8 []){ 10, -1, }, }, }, static struct dsa_platform_data pd = { .netdev = &foo, .nr_switches = 2, .sw = sw, }; Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'arch/arm/mach-orion5x')
-rw-r--r--arch/arm/mach-orion5x/common.c5
-rw-r--r--arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c9
-rw-r--r--arch/arm/mach-orion5x/rd88f5181l-ge-setup.c10
-rw-r--r--arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c10
-rw-r--r--arch/arm/mach-orion5x/wrt350n-v2-setup.c9
5 files changed, 34 insertions, 9 deletions
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 0a62337..a4ecf62 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -219,14 +219,17 @@ static struct platform_device orion5x_switch_device = {
void __init orion5x_eth_switch_init(struct dsa_platform_data *d, int irq)
{
+ int i;
+
if (irq != NO_IRQ) {
orion5x_switch_resources[0].start = irq;
orion5x_switch_resources[0].end = irq;
orion5x_switch_device.num_resources = 1;
}
- d->mii_bus = &orion5x_eth_shared.dev;
d->netdev = &orion5x_eth.dev;
+ for (i = 0; i < d->nr_chips; i++)
+ d->chip[i].mii_bus = &orion5x_eth_shared.dev;
orion5x_switch_device.dev.platform_data = d;
platform_device_register(&orion5x_switch_device);
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 15f5323..9c1ca41 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -94,7 +94,7 @@ static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
.duplex = DUPLEX_FULL,
};
-static struct dsa_platform_data rd88f5181l_fxo_switch_data = {
+static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = {
.port_names[0] = "lan2",
.port_names[1] = "lan1",
.port_names[2] = "wan",
@@ -103,6 +103,11 @@ static struct dsa_platform_data rd88f5181l_fxo_switch_data = {
.port_names[7] = "lan3",
};
+static struct dsa_platform_data rd88f5181l_fxo_switch_plat_data = {
+ .nr_chips = 1,
+ .chip = &rd88f5181l_fxo_switch_chip_data,
+};
+
static void __init rd88f5181l_fxo_init(void)
{
/*
@@ -117,7 +122,7 @@ static void __init rd88f5181l_fxo_init(void)
*/
orion5x_ehci0_init();
orion5x_eth_init(&rd88f5181l_fxo_eth_data);
- orion5x_eth_switch_init(&rd88f5181l_fxo_switch_data, NO_IRQ);
+ orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ);
orion5x_uart0_init();
orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 8ad3934..ee1399f 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -95,7 +95,7 @@ static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
.duplex = DUPLEX_FULL,
};
-static struct dsa_platform_data rd88f5181l_ge_switch_data = {
+static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = {
.port_names[0] = "lan2",
.port_names[1] = "lan1",
.port_names[2] = "wan",
@@ -104,6 +104,11 @@ static struct dsa_platform_data rd88f5181l_ge_switch_data = {
.port_names[7] = "lan3",
};
+static struct dsa_platform_data rd88f5181l_ge_switch_plat_data = {
+ .nr_chips = 1,
+ .chip = &rd88f5181l_ge_switch_chip_data,
+};
+
static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
I2C_BOARD_INFO("ds1338", 0x68),
};
@@ -122,7 +127,8 @@ static void __init rd88f5181l_ge_init(void)
*/
orion5x_ehci0_init();
orion5x_eth_init(&rd88f5181l_ge_eth_data);
- orion5x_eth_switch_init(&rd88f5181l_ge_switch_data, gpio_to_irq(8));
+ orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data,
+ gpio_to_irq(8));
orion5x_i2c_init();
orion5x_uart0_init();
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 262e25e..7737cf9 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -35,7 +35,7 @@ static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
.duplex = DUPLEX_FULL,
};
-static struct dsa_platform_data rd88f6183ap_ge_switch_data = {
+static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = {
.port_names[0] = "lan1",
.port_names[1] = "lan2",
.port_names[2] = "lan3",
@@ -44,6 +44,11 @@ static struct dsa_platform_data rd88f6183ap_ge_switch_data = {
.port_names[5] = "cpu",
};
+static struct dsa_platform_data rd88f6183ap_ge_switch_plat_data = {
+ .nr_chips = 1,
+ .chip = &rd88f6183ap_ge_switch_chip_data,
+};
+
static struct mtd_partition rd88f6183ap_ge_partitions[] = {
{
.name = "kernel",
@@ -89,7 +94,8 @@ static void __init rd88f6183ap_ge_init(void)
*/
orion5x_ehci0_init();
orion5x_eth_init(&rd88f6183ap_ge_eth_data);
- orion5x_eth_switch_init(&rd88f6183ap_ge_switch_data, gpio_to_irq(3));
+ orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data,
+ gpio_to_irq(3));
spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
orion5x_spi_init();
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index cc8f892..1b4ad9d 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -106,7 +106,7 @@ static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
.duplex = DUPLEX_FULL,
};
-static struct dsa_platform_data wrt350n_v2_switch_data = {
+static struct dsa_chip_data wrt350n_v2_switch_chip_data = {
.port_names[0] = "lan2",
.port_names[1] = "lan1",
.port_names[2] = "wan",
@@ -115,6 +115,11 @@ static struct dsa_platform_data wrt350n_v2_switch_data = {
.port_names[7] = "lan4",
};
+static struct dsa_platform_data wrt350n_v2_switch_plat_data = {
+ .nr_chips = 1,
+ .chip = &wrt350n_v2_switch_chip_data,
+};
+
static void __init wrt350n_v2_init(void)
{
/*
@@ -129,7 +134,7 @@ static void __init wrt350n_v2_init(void)
*/
orion5x_ehci0_init();
orion5x_eth_init(&wrt350n_v2_eth_data);
- orion5x_eth_switch_init(&wrt350n_v2_switch_data, NO_IRQ);
+ orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ);
orion5x_uart0_init();
orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
OpenPOWER on IntegriCloud