diff options
| author | Rod Whitby <rod@whitby.id.au> | 2008-04-01 10:53:23 +0100 |
|---|---|---|
| committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2008-04-04 10:03:59 +0100 |
| commit | 7e36e2f5355ab87f8946041d044b34cda01e2077 (patch) | |
| tree | 634798504df6b50a1001b0ea439d3d0987c46319 /arch/arm/mach-orion5x/ts209-setup.c | |
| parent | 05dda977f2574c3341abef9b74c27d2b362e1e3a (diff) | |
| download | op-kernel-dev-7e36e2f5355ab87f8946041d044b34cda01e2077.zip op-kernel-dev-7e36e2f5355ab87f8946041d044b34cda01e2077.tar.gz | |
[ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board
The Freecom-FSG3 is a small network-attached-storage device with the
following feature set:
* Intel IXP422
* 4MB Flash (ixp4xx flash driver)
* 64MB RAM
* 4 USB 2.0 host ports (ehci and ohci drivers)
* 1 WAN (eth1) and 3 LAN (eth0) ethernet ports
* Supported by the open source ixp4xx ethernet driver
* Via VT6421 disk controller (libata and sata-via drivers)
* Internal hard disk (PATA supported, SATA not yet supported)
* External SATA port (not yet supported)
* ISL1208 RTC chip
* Winbond 83782 temp sensor and fan controller
* MiniPCI slot
The ixp4xx_defconfig is also updated to support this device (the
leds-fsg driver is to be submitted separately via the leds tree after
this initial support is merged, as it depends on header gpio defines).
Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/mach-orion5x/ts209-setup.c')
0 files changed, 0 insertions, 0 deletions
