[ARM] Orion: fix ->map_irq() PCIe bus number check

The current orion5x board ->map_irq() routines check whether a
given bus number lives on the PCIe controller by comparing it with
the PCIe controller's primary bus number.  This doesn't work in
case there are multiple buses in the PCIe domain, i.e. if there
exists a PCIe bridge on the primary PCIe bus.

This patch adds a helper function (orion5x_pci_map_irq()) that
returns the IRQ number for the given PCI device if that device has
a hard-wired IRQ, or -1 otherwise, and makes each board's
->map_irq() function use this helper function.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>

1 files changed, 10 insertions, 4 deletions

diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 9141345..36cf763 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -120,13 +120,19 @@ static struct platform_device kurobox_pro_nor_flash = {
 
 static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
 	/*
 	 * PCI isn't used on the Kuro
 	 */
-	if (dev->bus->number == orion5x_pcie_local_bus_nr())
-		return IRQ_ORION5X_PCIE0_INT;
-	else
-		printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n");
+	printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n");
 
 	return -1;
 }