summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2013-05-06 23:43:45 +0200
committerArnd Bergmann <arnd@arndb.de>2013-05-06 23:43:45 +0200
commit442a33ebce9e02a2dd6662f16c9f2aad834d0115 (patch)
treeca8654a286f61da917318645cab9e061095ecdba /arch/arm/mach-omap2
parenta94d236dc355f374857ee4e6e78b7dec8a0f29e3 (diff)
parentf31c2f1c68aff83277eddc6798adf3438e9c680a (diff)
downloadop-kernel-dev-442a33ebce9e02a2dd6662f16c9f2aad834d0115.zip
op-kernel-dev-442a33ebce9e02a2dd6662f16c9f2aad834d0115.tar.gz
Merge branch 'late/clksrc' into late/cleanup
There is no reason to keep the clksrc cleanups separate from the other cleanups, and this resolves some merge conflicts. Conflicts: arch/arm/mach-spear/spear13xx.c drivers/irqchip/Makefile
Diffstat (limited to 'arch/arm/mach-omap2')
-rw-r--r--arch/arm/mach-omap2/board-3430sdp.c21
-rw-r--r--arch/arm/mach-omap2/board-3630sdp.c21
-rw-r--r--arch/arm/mach-omap2/board-am3517crane.c24
-rw-r--r--arch/arm/mach-omap2/board-am3517evm.c17
-rw-r--r--arch/arm/mach-omap2/board-cm-t35.c20
-rw-r--r--arch/arm/mach-omap2/board-cm-t3517.c22
-rw-r--r--arch/arm/mach-omap2/board-devkit8000.c8
-rw-r--r--arch/arm/mach-omap2/board-generic.c2
-rw-r--r--arch/arm/mach-omap2/board-igep0020.c32
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c34
-rw-r--r--arch/arm/mach-omap2/board-omap3evm.c25
-rw-r--r--arch/arm/mach-omap2/board-omap3pandora.c21
-rw-r--r--arch/arm/mach-omap2/board-omap3stalker.c17
-rw-r--r--arch/arm/mach-omap2/board-omap3touchbook.c17
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c55
-rw-r--r--arch/arm/mach-omap2/board-overo.c16
-rw-r--r--arch/arm/mach-omap2/board-zoom.c16
-rw-r--r--arch/arm/mach-omap2/clock.c2
-rw-r--r--arch/arm/mach-omap2/common.h3
-rw-r--r--arch/arm/mach-omap2/gpmc-nand.c42
-rw-r--r--arch/arm/mach-omap2/gpmc-onenand.c122
-rw-r--r--arch/arm/mach-omap2/gpmc-smc91x.c30
-rw-r--r--arch/arm/mach-omap2/gpmc.c548
-rw-r--r--arch/arm/mach-omap2/gpmc.h43
-rw-r--r--arch/arm/mach-omap2/omap_device.c13
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c4
-rw-r--r--arch/arm/mach-omap2/pm-debug.c6
-rw-r--r--arch/arm/mach-omap2/powerdomain.c2
-rw-r--r--arch/arm/mach-omap2/timer.c133
-rw-r--r--arch/arm/mach-omap2/usb-host.c160
-rw-r--r--arch/arm/mach-omap2/usb-tusb6010.c62
-rw-r--r--arch/arm/mach-omap2/usb.h9
32 files changed, 1014 insertions, 533 deletions
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 594c633..23b004a 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -428,16 +428,23 @@ static void enable_board_wakeup_source(void)
OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = 57,
+ .vcc_gpio = -EINVAL,
+ },
+ {
+ .port = 2,
+ .reset_gpio = 61,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = 57,
- .reset_gpio_port[1] = 61,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
@@ -589,6 +596,8 @@ static void __init omap_3430sdp_init(void)
board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
sdp3430_display_init();
enable_board_wakeup_source();
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 67447bd..20d6d81 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -53,16 +53,23 @@ static void enable_board_wakeup_source(void)
OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = 126,
+ .vcc_gpio = -EINVAL,
+ },
+ {
+ .port = 2,
+ .reset_gpio = 61,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = 126,
- .reset_gpio_port[1] = 61,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
@@ -199,6 +206,8 @@ static void __init omap_sdp_init(void)
board_smc91x_init();
board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
enable_board_wakeup_source();
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 7d3358b..fc53911 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -47,15 +47,17 @@ static struct omap_board_mux board_mux[] __initdata = {
};
#endif
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = GPIO_USB_NRESET,
+ .vcc_gpio = GPIO_USB_POWER,
+ .vcc_polarity = 1,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = GPIO_USB_NRESET,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
};
static struct mtd_partition crane_nand_partitions[] = {
@@ -131,13 +133,7 @@ static void __init am3517_crane_init(void)
return;
}
- ret = gpio_request_one(GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH,
- "usb_ehci_enable");
- if (ret < 0) {
- pr_err("Can not request GPIO %d\n", GPIO_USB_POWER);
- return;
- }
-
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
}
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 2b9eb3d..d63f14b 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -213,6 +213,14 @@ static __init void am3517_evm_mcbsp1_init(void)
omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0);
}
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = 57,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
@@ -221,12 +229,6 @@ static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
#else
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
#endif
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = 57,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
@@ -288,7 +290,6 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
-
static void __init am3517_evm_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -300,6 +301,8 @@ static void __init am3517_evm_init(void)
/* Configure GPIO for EHCI port */
omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 710e99d..ee6218c 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -376,15 +376,22 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = OMAP_MAX_GPIO_LINES + 6,
+ .vcc_gpio = -EINVAL,
+ },
+ {
+ .port = 2,
+ .reset_gpio = OMAP_MAX_GPIO_LINES + 7,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = OMAP_MAX_GPIO_LINES + 6,
- .reset_gpio_port[1] = OMAP_MAX_GPIO_LINES + 7,
- .reset_gpio_port[2] = -EINVAL
};
static void __init cm_t35_init_usbh(void)
@@ -401,6 +408,7 @@ static void __init cm_t35_init_usbh(void)
msleep(1);
}
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index a66da80..4eb5e6f 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -188,15 +188,22 @@ static inline void cm_t3517_init_rtc(void) {}
#define HSUSB2_RESET_GPIO (147)
#define USB_HUB_RESET_GPIO (152)
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = HSUSB1_RESET_GPIO,
+ .vcc_gpio = -EINVAL,
+ },
+ {
+ .port = 2,
+ .reset_gpio = HSUSB2_RESET_GPIO,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data cm_t3517_ehci_pdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = HSUSB1_RESET_GPIO,
- .reset_gpio_port[1] = HSUSB2_RESET_GPIO,
- .reset_gpio_port[2] = -EINVAL,
};
static int __init cm_t3517_init_usbh(void)
@@ -213,6 +220,7 @@ static int __init cm_t3517_init_usbh(void)
msleep(1);
}
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&cm_t3517_ehci_pdata);
return 0;
@@ -324,6 +332,6 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
.handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t3517_init,
.init_late = am35xx_init_late,
- .init_time = omap3_gp_gptimer_timer_init,
+ .init_time = omap3_gptimer_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 34944cf..5764205 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -415,15 +415,7 @@ static struct platform_device *devkit8000_devices[] __initdata = {
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index e54a480..78813b3 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -140,7 +140,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)")
.init_irq = omap_intc_of_init,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_generic_init,
- .init_time = omap3_am33xx_gptimer_timer_init,
+ .init_time = omap3_gptimer_timer_init,
.dt_compat = am33xx_boards_compat,
.restart = am33xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index e979d48..b54562d 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -527,26 +527,28 @@ static void __init igep_i2c_init(void)
omap3_pmic_init("twl4030", &igep_twldata);
}
+static struct usbhs_phy_data igep2_phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = IGEP2_GPIO_USBH_NRESET,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
+static struct usbhs_phy_data igep3_phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = IGEP3_GPIO_USBH_NRESET,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL,
};
static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET,
- .reset_gpio_port[2] = -EINVAL,
};
#ifdef CONFIG_OMAP_MUX
@@ -642,8 +644,10 @@ static void __init igep_init(void)
if (machine_is_igep0020()) {
omap_display_init(&igep2_dss_data);
igep2_init_smsc911x();
+ usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data));
usbhs_init(&igep2_usbhs_bdata);
} else {
+ usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data));
usbhs_init(&igep3_usbhs_bdata);
}
}
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 0ce91af..6de7860 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -33,6 +33,7 @@
#include <linux/mtd/nand.h>
#include <linux/mmc/host.h>
#include <linux/usb/phy.h>
+#include <linux/usb/nop-usb-xceiv.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
@@ -277,6 +278,21 @@ static struct regulator_consumer_supply beagle_vsim_supply[] = {
static struct gpio_led gpio_leds[];
+/* PHY's VCC regulator might be added later, so flag that we need it */
+static struct nop_usb_xceiv_platform_data hsusb2_phy_data = {
+ .needs_vcc = true,
+};
+
+static struct usbhs_phy_data phy_data[] = {
+ {
+ .port = 2,
+ .reset_gpio = 147,
+ .vcc_gpio = -1, /* updated in beagle_twl_gpio_setup */
+ .vcc_polarity = 1, /* updated in beagle_twl_gpio_setup */
+ .platform_data = &hsusb2_phy_data,
+ },
+};
+
static int beagle_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
@@ -318,9 +334,11 @@ static int beagle_twl_gpio_setup(struct device *dev,
}
dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
- gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
- "nEN_USB_PWR");
+ /* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */
+ phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX;
+ phy_data[0].vcc_polarity = beagle_config.usb_pwr_level;
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
return 0;
}
@@ -453,15 +471,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = {
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 147,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
@@ -479,7 +489,7 @@ static int __init beagle_opp_init(void)
/* Initialize the omap3 opp table if not already created. */
r = omap3_opp_init();
- if (IS_ERR_VALUE(r) && (r != -EEXIST)) {
+ if (r < 0 && (r != -EEXIST)) {
pr_err("%s: opp default init failed\n", __func__);
return r;
}
@@ -543,7 +553,9 @@ static void __init omap3_beagle_init(void)
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
+
usbhs_init(&usbhs_bdata);
+
board_nand_init(omap3beagle_nand_partitions,
ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
NAND_BUSWIDTH_16, NULL);
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 5eecc17..f76d0de 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -466,7 +466,7 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = {
REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"), /* OMAP ISP */
REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"), /* OMAP ISP */
- REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
+ REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */
REGULATOR_SUPPLY("vaux2", NULL),
};
@@ -509,17 +509,16 @@ static int __init omap3_evm_i2c_init(void)
return 0;
}
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = -1, /* set at runtime */
+ .vcc_gpio = -EINVAL,
+ },
+};
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- /* PHY reset GPIO will be runtime programmed based on EVM version */
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
@@ -695,7 +694,7 @@ static void __init omap3_evm_init(void)
/* setup EHCI phy reset config */
omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
- usbhs_bdata.reset_gpio_port[1] = 21;
+ phy_data[0].reset_gpio = 21;
/* EVM REV >= E can supply 500mA with EXTVBUS programming */
musb_board_data.power = 500;
@@ -703,10 +702,12 @@ static void __init omap3_evm_init(void)
} else {
/* setup EHCI phy reset on MDC */
omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
- usbhs_bdata.reset_gpio_port[1] = 135;
+ phy_data[0].reset_gpio = 135;
}
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(&musb_board_data);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
board_nand_init(omap3evm_nand_partitions,
ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 533180f..28133d5 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -351,7 +351,7 @@ static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
};
static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
- REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
+ REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */
};
/* ads7846 on SPI and 2 nub controllers on I2C */
@@ -566,6 +566,14 @@ fail:
printk(KERN_ERR "wl1251 board initialisation failed\n");
}
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = 16,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct platform_device *omap3pandora_devices[] __initdata = {
&pandora_leds_gpio,
&pandora_keys_gpio,
@@ -574,15 +582,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 16,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
@@ -606,7 +606,10 @@ static void __init omap3pandora_init(void)
spi_register_board_info(omap3pandora_spi_board_info,
ARRAY_SIZE(omap3pandora_spi_board_info));
omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
+
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
gpmc_nand_init(&pandora_nand_data, NULL);
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 5e63f07..d37e6b1 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -346,19 +346,20 @@ static int __init omap3_stalker_i2c_init(void)
#define OMAP3_STALKER_TS_GPIO 175
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = 21,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct platform_device *omap3_stalker_devices[] __initdata = {
&keys_gpio,
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 21,
- .reset_gpio_port[2] = -EINVAL,
};
#ifdef CONFIG_OMAP_MUX
@@ -395,6 +396,8 @@ static void __init omap3_stalker_init(void)
omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index bcd44fb..7da48bc 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -305,21 +305,22 @@ static struct omap_board_mux board_mux[] __initdata = {
};
#endif
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = 147,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct platform_device *omap3_touchbook_devices[] __initdata = {
&leds_gpio,
&keys_gpio,
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 147,
- .reset_gpio_port[2] = -EINVAL
};
static void omap3_touchbook_poweroff(void)
@@ -368,6 +369,8 @@ static void __init omap3_touchbook_init(void)
omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
board_nand_init(omap3touchbook_nand_partitions,
ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index b02c2f0..a71ad34 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -31,6 +31,7 @@
#include <linux/ti_wilink_st.h>
#include <linux/usb/musb.h>
#include <linux/usb/phy.h>
+#include <linux/usb/nop-usb-xceiv.h>
#include <linux/wl12xx.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/omap-abe-twl6040.h>
@@ -132,6 +133,22 @@ static struct platform_device btwilink_device = {
.id = -1,
};
+/* PHY device on HS USB Port 1 i.e. nop_usb_xceiv.1 */
+static struct nop_usb_xceiv_platform_data hsusb1_phy_data = {
+ /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
+ .clk_rate = 19200000,
+};
+
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = GPIO_HUB_NRESET,
+ .vcc_gpio = GPIO_HUB_POWER,
+ .vcc_polarity = 1,
+ .platform_data = &hsusb1_phy_data,
+ },
+};
+
static struct platform_device *panda_devices[] __initdata = {
&leds_gpio,
&wl1271_device,
@@ -142,49 +159,19 @@ static struct platform_device *panda_devices[] __initdata = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
- .phy_reset = false,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
-};
-
-static struct gpio panda_ehci_gpios[] __initdata = {
- { GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" },
- { GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" },
};
static void __init omap4_ehci_init(void)
{
int ret;
- struct clk *phy_ref_clk;
/* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
- phy_ref_clk = clk_get(NULL, "auxclk3_ck");
- if (IS_ERR(phy_ref_clk)) {
- pr_err("Cannot request auxclk3\n");
- return;
- }
- clk_set_rate(phy_ref_clk, 19200000);
- clk_prepare_enable(phy_ref_clk);
-
- /* disable the power to the usb hub prior to init and reset phy+hub */
- ret = gpio_request_array(panda_ehci_gpios,
- ARRAY_SIZE(panda_ehci_gpios));
- if (ret) {
- pr_err("Unable to initialize EHCI power/reset\n");
- return;
- }
-
- gpio_export(GPIO_HUB_POWER, 0);
- gpio_export(GPIO_HUB_NRESET, 0);
- gpio_set_value(GPIO_HUB_NRESET, 1);
+ ret = clk_add_alias("main_clk", "nop_usb_xceiv.1", "auxclk3_ck", NULL);
+ if (ret)
+ pr_err("Failed to add main_clk alias to auxclk3_ck\n");
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
-
- /* enable power to hub */
- gpio_set_value(GPIO_HUB_POWER, 1);
}
static struct omap_musb_board_data musb_board_data = {
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index f790ce5..4ca6b68 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -428,14 +428,16 @@ static int __init overo_spi_init(void)
return 0;
}
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = OVERO_GPIO_USBH_NRESET,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
@@ -472,6 +474,8 @@ static void __init overo_init(void)
ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
overo_spi_init();
overo_init_smsc911x();
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 5e4d4c9..1a3dd86 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -92,14 +92,16 @@ static struct mtd_partition zoom_nand_partitions[] = {
},
};
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = ZOOM3_EHCI_RESET_GPIO,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = ZOOM3_EHCI_RESET_GPIO,
- .reset_gpio_port[2] = -EINVAL,
};
static void __init omap_zoom_init(void)
@@ -109,6 +111,8 @@ static void __init omap_zoom_init(void)
} else if (machine_is_omap_zoom3()) {
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index e4ec3a6..2191f25 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -596,7 +596,7 @@ int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name)
return -ENOENT;
r = clk_set_rate(mpurate_ck, mpurate);
- if (IS_ERR_VALUE(r)) {
+ if (r < 0) {
WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n",
mpurate_ck_name, mpurate, r);
clk_put(mpurate_ck);
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index d6ba13e..272490e 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -82,8 +82,7 @@ extern void omap2_init_common_infrastructure(void);
extern void omap2_sync32k_timer_init(void);
extern void omap3_sync32k_timer_init(void);
extern void omap3_secure_sync32k_timer_init(void);
-extern void omap3_gp_gptimer_timer_init(void);
-extern void omap3_am33xx_gptimer_timer_init(void);
+extern void omap3_gptimer_timer_init(void);
extern void omap4_local_timer_init(void);
extern void omap5_realtime_timer_init(void);
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index afc1e8c..d9c2719 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -74,14 +74,6 @@ static int omap2_nand_gpmc_retime(
t.cs_wr_off = gpmc_t->cs_wr_off;
t.wr_cycle = gpmc_t->wr_cycle;
- /* Configure GPMC */
- if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
- gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 1);
- else
- gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0);
- gpmc_cs_configure(gpmc_nand_data->cs,
- GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND);
- gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0);
err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
if (err)
return err;
@@ -115,14 +107,18 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
struct gpmc_timings *gpmc_t)
{
int err = 0;
+ struct gpmc_settings s;
struct device *dev = &gpmc_nand_device.dev;
+ memset(&s, 0, sizeof(struct gpmc_settings));
+
gpmc_nand_device.dev.platform_data = gpmc_nand_data;
err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
(unsigned long *)&gpmc_nand_resource[0].start);
if (err < 0) {
- dev_err(dev, "Cannot request GPMC CS\n");
+ dev_err(dev, "Cannot request GPMC CS %d, error %d\n",
+ gpmc_nand_data->cs, err);
return err;
}
@@ -140,11 +136,31 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
dev_err(dev, "Unable to set gpmc timings: %d\n", err);
return err;
}
- }
- /* Enable RD PIN Monitoring Reg */
- if (gpmc_nand_data->dev_ready) {
- gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1);
+ if (gpmc_nand_data->of_node) {
+ gpmc_read_settings_dt(gpmc_nand_data->of_node, &s);
+ } else {
+ s.device_nand = true;
+
+ /* Enable RD PIN Monitoring Reg */
+ if (gpmc_nand_data->dev_ready) {
+ s.wait_on_read = true;
+ s.wait_on_write = true;
+ }
+ }
+
+ if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
+ s.device_width = GPMC_DEVWIDTH_16BIT;
+ else
+ s.device_width = GPMC_DEVWIDTH_8BIT;
+
+ err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s);
+ if (err < 0)
+ goto out_free_cs;
+
+ err = gpmc_configure(GPMC_CONFIG_WP, 0);
+ if (err < 0)
+ goto out_free_cs;
}
gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index fadd8743..64b5a83 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -47,11 +47,23 @@ static struct platform_device gpmc_onenand_device = {
.resource = &gpmc_onenand_resource,
};
-static struct gpmc_timings omap2_onenand_calc_async_timings(void)
+static struct gpmc_settings onenand_async = {
+ .device_width = GPMC_DEVWIDTH_16BIT,
+ .mux_add_data = GPMC_MUX_AD,
+};
+
+static struct gpmc_settings onenand_sync = {
+ .burst_read = true,
+ .burst_wrap = true,
+ .burst_len = GPMC_BURST_16,
+ .device_width = GPMC_DEVWIDTH_16BIT,
+ .mux_add_data = GPMC_MUX_AD,
+ .wait_pin = 0,
+};
+
+static void omap2_onenand_calc_async_timings(struct gpmc_timings *t)
{
struct gpmc_device_timings dev_t;
- struct gpmc_timings t;
-
const int t_cer = 15;
const int t_avdp = 12;
const int t_aavdh = 7;
@@ -64,7 +76,6 @@ static struct gpmc_timings omap2_onenand_calc_async_timings(void)
memset(&dev_t, 0, sizeof(dev_t));
- dev_t.mux = true;
dev_t.t_avdp_r = max_t(int, t_avdp, t_cer) * 1000;
dev_t.t_avdp_w = dev_t.t_avdp_r;
dev_t.t_aavdh = t_aavdh * 1000;
@@ -76,19 +87,7 @@ static struct gpmc_timings omap2_onenand_calc_async_timings(void)
dev_t.t_wpl = t_wpl * 1000;
dev_t.t_wph = t_wph * 1000;
- gpmc_calc_timings(&t, &dev_t);
-
- return t;
-}
-
-static int gpmc_set_async_mode(int cs, struct gpmc_timings *t)
-{
- /* Configure GPMC for asynchronous read */
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
- GPMC_CONFIG1_DEVICESIZE_16 |
- GPMC_CONFIG1_MUXADDDATA);
-
- return gpmc_cs_set_timings(cs, t);
+ gpmc_calc_timings(t, &onenand_async, &dev_t);
}
static void omap2_onenand_set_async_mode(void __iomem *onenand_base)
@@ -158,12 +157,11 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg,
return freq;
}
-static struct gpmc_timings
-omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg,
- int freq)
+static void omap2_onenand_calc_sync_timings(struct gpmc_timings *t,
+ unsigned int flags,
+ int freq)
{
struct gpmc_device_timings dev_t;
- struct gpmc_timings t;
const int t_cer = 15;
const int t_avdp = 12;
const int t_cez = 20; /* max of t_cez, t_oez */
@@ -172,9 +170,9 @@ omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg,
int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
int div, gpmc_clk_ns;
- if (cfg->flags & ONENAND_SYNC_READ)
+ if (flags & ONENAND_SYNC_READ)
onenand_flags = ONENAND_FLAG_SYNCREAD;
- else if (cfg->flags & ONENAND_SYNC_READWRITE)
+ else if (flags & ONENAND_SYNC_READWRITE)
onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE;
switch (freq) {
@@ -239,10 +237,11 @@ omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg,
/* Set synchronous read timings */
memset(&dev_t, 0, sizeof(dev_t));
- dev_t.mux = true;
- dev_t.sync_read = true;
+ if (onenand_flags & ONENAND_FLAG_SYNCREAD)
+ onenand_sync.sync_read = true;
if (onenand_flags & ONENAND_FLAG_SYNCWRITE) {
- dev_t.sync_write = true;
+ onenand_sync.sync_write = true;
+ onenand_sync.burst_write = true;
} else {
dev_t.t_avdp_w = max(t_avdp, t_cer) * 1000;
dev_t.t_wpl = t_wpl * 1000;
@@ -265,32 +264,7 @@ omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg,
dev_t.cyc_aavdh_oe = 1;
dev_t.t_rdyo = t_rdyo * 1000 + min_gpmc_clk_period;
- gpmc_calc_timings(&t, &dev_t);
-
- return t;
-}
-
-static int gpmc_set_sync_mode(int cs, struct gpmc_timings *t)
-{
- unsigned sync_read = onenand_flags & ONENAND_FLAG_SYNCREAD;
- unsigned sync_write = onenand_flags & ONENAND_FLAG_SYNCWRITE;
-
- /* Configure GPMC for synchronous read */
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
- GPMC_CONFIG1_WRAPBURST_SUPP |
- GPMC_CONFIG1_READMULTIPLE_SUPP |
- (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) |
- (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) |
- (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) |
- GPMC_CONFIG1_PAGE_LEN(2) |
- (cpu_is_omap34xx() ? 0 :
- (GPMC_CONFIG1_WAIT_READ_MON |
- GPMC_CONFIG1_WAIT_PIN_SEL(0))) |
- GPMC_CONFIG1_DEVICESIZE_16 |
- GPMC_CONFIG1_DEVICETYPE_NOR |
- GPMC_CONFIG1_MUXADDDATA);
-
- return gpmc_cs_set_timings(cs, t);
+ gpmc_calc_timings(t, &onenand_sync, &dev_t);
}
static int omap2_onenand_setup_async(void __iomem *onenand_base)
@@ -298,12 +272,20 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
struct gpmc_timings t;
int ret;
+ if (gpmc_onenand_data->of_node)
+ gpmc_read_settings_dt(gpmc_onenand_data->of_node,
+ &onenand_async);
+
omap2_onenand_set_async_mode(onenand_base);
- t = omap2_onenand_calc_async_timings();
+ omap2_onenand_calc_async_timings(&t);
+
+ ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async);
+ if (ret < 0)
+ return ret;
- ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t);
- if (IS_ERR_VALUE(ret))
+ ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t);
+ if (ret < 0)
return ret;
omap2_onenand_set_async_mode(onenand_base);
@@ -322,10 +304,26 @@ static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr)
set_onenand_cfg(onenand_base);
}
- t = omap2_onenand_calc_sync_timings(gpmc_onenand_data, freq);
+ if (gpmc_onenand_data->of_node) {
+ gpmc_read_settings_dt(gpmc_onenand_data->of_node,
+ &onenand_sync);
+ } else {
+ /*
+ * FIXME: Appears to be legacy code from initial ONENAND commit.
+ * Unclear what boards this is for and if this can be removed.
+ */
+ if (!cpu_is_omap34xx())
+ onenand_sync.wait_on_read = true;
+ }
+
+ omap2_onenand_calc_sync_timings(&t, gpmc_onenand_data->flags, freq);
- ret = gpmc_set_sync_mode(gpmc_onenand_data->cs, &t);
- if (IS_ERR_VALUE(ret))
+ ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_sync);
+ if (ret < 0)
+ return ret;
+
+ ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t);
+ if (ret < 0)
return ret;
set_onenand_cfg(onenand_base);
@@ -359,6 +357,7 @@ static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr)
void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
{
int err;
+ struct device *dev = &gpmc_onenand_device.dev;
gpmc_onenand_data = _onenand_data;
gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
@@ -366,7 +365,7 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
if (cpu_is_omap24xx() &&
(gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) {
- printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n");
+ dev_warn(dev, "OneNAND using only SYNC_READ on 24xx\n");
gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE;
gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
}
@@ -379,7 +378,8 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE,
(unsigned long *)&gpmc_onenand_resource.start);
if (err < 0) {
- pr_err("%s: Cannot request GPMC CS\n", __func__);
+ dev_err(dev, "Cannot request GPMC CS %d, error %d\n",
+ gpmc_onenand_data->cs, err);
return;
}
@@ -387,7 +387,7 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
ONENAND_IO_SIZE - 1;
if (platform_device_register(&gpmc_onenand_device) < 0) {
- pr_err("%s: Unable to register OneNAND device\n", __func__);
+ dev_err(dev, "Unable to register OneNAND device\n");
gpmc_cs_free(gpmc_onenand_data->cs);
return;
}
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
index 11d0b75..61a0635 100644
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -49,6 +49,10 @@ static struct platform_device gpmc_smc91x_device = {
.resource = gpmc_smc91x_resources,
};
+static struct gpmc_settings smc91x_settings = {
+ .device_width = GPMC_DEVWIDTH_16BIT,
+};
+
/*
* Set the gpmc timings for smc91c96. The timings are taken
* from the data sheet available at:
@@ -67,18 +71,6 @@ static int smc91c96_gpmc_retime(void)
const int t7 = 5; /* Figure 12.4 write */
const int t8 = 5; /* Figure 12.4 write */
const int t20 = 185; /* Figure 12.2 read and 12.4 write */
- u32 l;
-
- l = GPMC_CONFIG1_DEVICESIZE_16;
- if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
- l |= GPMC_CONFIG1_MUXADDDATA;
- if (gpmc_cfg->flags & GPMC_READ_MON)
- l |= GPMC_CONFIG1_WAIT_READ_MON;
- if (gpmc_cfg->flags & GPMC_WRITE_MON)
- l |= GPMC_CONFIG1_WAIT_WRITE_MON;
- if (gpmc_cfg->wait_pin)
- l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin);
- gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l);
/*
* FIXME: Calculate the address and data bus muxed timings.
@@ -104,7 +96,7 @@ static int smc91c96_gpmc_retime(void)
dev_t.t_cez_w = t4_w * 1000;
dev_t.t_wr_cycle = (t20 - t3) * 1000;
- gpmc_calc_timings(&t, &dev_t);
+ gpmc_calc_timings(&t, &smc91x_settings, &dev_t);
return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
}
@@ -133,6 +125,18 @@ void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
+ if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+ smc91x_settings.mux_add_data = GPMC_MUX_AD;
+ if (gpmc_cfg->flags & GPMC_READ_MON)
+ smc91x_settings.wait_on_read = true;
+ if (gpmc_cfg->flags & GPMC_WRITE_MON)
+ smc91x_settings.wait_on_write = true;
+ if (gpmc_cfg->wait_pin)
+ smc91x_settings.wait_pin = gpmc_cfg->wait_pin;
+ ret = gpmc_cs_program_settings(gpmc_cfg->cs, &smc91x_settings);
+ if (ret < 0)
+ goto free1;
+
if (gpmc_cfg->retime) {
ret = gpmc_cfg->retime();
if (ret != 0)
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 410e1ba..ed946df 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -26,6 +26,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_mtd.h>
#include <linux/of_device.h>
#include <linux/mtd/nand.h>
@@ -91,9 +92,7 @@
#define GPMC_CS_SIZE 0x30
#define GPMC_BCH_SIZE 0x10
-#define GPMC_MEM_START 0x00000000
#define GPMC_MEM_END 0x3FFFFFFF
-#define BOOT_ROM_SPACE 0x100000 /* 1MB */
#define GPMC_CHUNK_SHIFT 24 /* 16 MB */
#define GPMC_SECTION_SHIFT 28 /* 128 MB */
@@ -107,6 +106,9 @@
#define GPMC_HAS_WR_ACCESS 0x1
#define GPMC_HAS_WR_DATA_MUX_BUS 0x2
+#define GPMC_HAS_MUX_AAD 0x4
+
+#define GPMC_NR_WAITPINS 4
/* XXX: Only NAND irq has been considered,currently these are the only ones used
*/
@@ -153,6 +155,7 @@ static struct resource gpmc_cs_mem[GPMC_CS_NUM];
static DEFINE_SPINLOCK(gpmc_mem_lock);
/* Define chip-selects as reserved by default until probe completes */
static unsigned int gpmc_cs_map = ((1 << GPMC_CS_NUM) - 1);
+static unsigned int gpmc_nr_waitpins;
static struct device *gpmc_dev;
static int gpmc_irq;
static resource_size_t phys_base, mem_size;
@@ -181,7 +184,7 @@ void gpmc_cs_write_reg(int cs, int idx, u32 val)
__raw_writel(val, reg_addr);
}
-u32 gpmc_cs_read_reg(int cs, int idx)
+static u32 gpmc_cs_read_reg(int cs, int idx)
{
void __iomem *reg_addr;
@@ -190,7 +193,7 @@ u32 gpmc_cs_read_reg(int cs, int idx)
}
/* TODO: Add support for gpmc_fck to clock framework and use it */
-unsigned long gpmc_get_fclk_period(void)
+static unsigned long gpmc_get_fclk_period(void)
{
unsigned long rate = clk_get_rate(gpmc_l3_clk);
@@ -205,7 +208,7 @@ unsigned long gpmc_get_fclk_period(void)
return rate;
}
-unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
+static unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
{
unsigned long tick_ps;
@@ -215,7 +218,7 @@ unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
return (time_ns * 1000 + tick_ps - 1) / tick_ps;
}
-unsigned int gpmc_ps_to_ticks(unsigned int time_ps)
+static unsigned int gpmc_ps_to_ticks(unsigned int time_ps)
{
unsigned long tick_ps;
@@ -230,13 +233,6 @@ unsigned int gpmc_ticks_to_ns(unsigned int ticks)
return ticks * gpmc_get_fclk_period() / 1000;
}
-unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns)
-{
- unsigned long ticks = gpmc_ns_to_ticks(time_ns);
-
- return ticks * gpmc_get_fclk_period() / 1000;
-}
-
static unsigned int gpmc_ticks_to_ps(unsigned int ticks)
{
return ticks * gpmc_get_fclk_period();
@@ -405,11 +401,18 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
return 0;
}
-static void gpmc_cs_enable_mem(int cs, u32 base, u32 size)
+static int gpmc_cs_enable_mem(int cs, u32 base, u32 size)
{
u32 l;
u32 mask;
+ /*
+ * Ensure that base address is aligned on a
+ * boundary equal to or greater than size.
+ */
+ if (base & (size - 1))
+ return -EINVAL;
+
mask = (1 << GPMC_SECTION_SHIFT) - size;
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
l &= ~0x3f;
@@ -418,6 +421,8 @@ static void gpmc_cs_enable_mem(int cs, u32 base, u32 size)
l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8;
l |= GPMC_CONFIG7_CSVALID;
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
+
+ return 0;
}
static void gpmc_cs_disable_mem(int cs)
@@ -448,22 +453,14 @@ static int gpmc_cs_mem_enabled(int cs)
return l & GPMC_CONFIG7_CSVALID;
}
-int gpmc_cs_set_reserved(int cs, int reserved)
+static void gpmc_cs_set_reserved(int cs, int reserved)
{
- if (cs > GPMC_CS_NUM)
- return -ENODEV;
-
gpmc_cs_map &= ~(1 << cs);
gpmc_cs_map |= (reserved ? 1 : 0) << cs;
-
- return 0;
}
-int gpmc_cs_reserved(int cs)
+static bool gpmc_cs_reserved(int cs)
{
- if (cs > GPMC_CS_NUM)
- return -ENODEV;
-
return gpmc_cs_map & (1 << cs);
}
@@ -510,6 +507,39 @@ static int gpmc_cs_delete_mem(int cs)
return r;
}
+/**
+ * gpmc_cs_remap - remaps a chip-select physical base address
+ * @cs: chip-select to remap
+ * @base: physical base address to re-map chip-select to
+ *
+ * Re-maps a chip-select to a new physical base address specified by
+ * "base". Returns 0 on success and appropriate negative error code
+ * on failure.
+ */
+static int gpmc_cs_remap(int cs, u32 base)
+{
+ int ret;
+ u32 old_base, size;
+
+ if (cs > GPMC_CS_NUM)
+ return -ENODEV;
+ gpmc_cs_get_memconf(cs, &old_base, &size);
+ if (base == old_base)
+ return 0;
+ gpmc_cs_disable_mem(cs);
+ ret = gpmc_cs_delete_mem(cs);
+ if (ret < 0)
+ return ret;
+ ret = gpmc_cs_insert_mem(cs, base, size);
+ if (ret < 0)
+ return ret;
+ ret = gpmc_cs_enable_mem(cs, base, size);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
{
struct resource *res = &gpmc_cs_mem[cs];
@@ -535,7 +565,12 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
if (r < 0)
goto out;
- gpmc_cs_enable_mem(cs, res->start, resource_size(res));
+ r = gpmc_cs_enable_mem(cs, res->start, resource_size(res));
+ if (r < 0) {
+ release_resource(res);
+ goto out;
+ }
+
*base = res->start;
gpmc_cs_set_reserved(cs, 1);
out:
@@ -561,16 +596,14 @@ void gpmc_cs_free(int cs)
EXPORT_SYMBOL(gpmc_cs_free);
/**
- * gpmc_cs_configure - write request to configure gpmc
- * @cs: chip select number
+ * gpmc_configure - write request to configure gpmc
* @cmd: command type
* @wval: value to write
* @return status of the operation
*/
-int gpmc_cs_configure(int cs, int cmd, int wval)
+int gpmc_configure(int cmd, int wval)
{
- int err = 0;
- u32 regval = 0;
+ u32 regval;
switch (cmd) {
case GPMC_ENABLE_IRQ:
@@ -590,43 +623,14 @@ int gpmc_cs_configure(int cs, int cmd, int wval)
gpmc_write_reg(GPMC_CONFIG, regval);
break;
- case GPMC_CONFIG_RDY_BSY:
- regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
- if (wval)
- regval |= WR_RD_PIN_MONITORING;
- else
- regval &= ~WR_RD_PIN_MONITORING;
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
- break;
-
- case GPMC_CONFIG_DEV_SIZE:
- regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
- /* clear 2 target bits */
- regval &= ~GPMC_CONFIG1_DEVICESIZE(3);
-
- /* set the proper value */
- regval |= GPMC_CONFIG1_DEVICESIZE(wval);
-
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
- break;
-
- case GPMC_CONFIG_DEV_TYPE:
- regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
- regval |= GPMC_CONFIG1_DEVICETYPE(wval);
- if (wval == GPMC_DEVICETYPE_NOR)
- regval |= GPMC_CONFIG1_MUXADDDATA;
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
- break;
-
default:
- printk(KERN_ERR "gpmc_configure_cs: Not supported\n");
- err = -EINVAL;
+ pr_err("%s: command not supported\n", __func__);
+ return -EINVAL;
}
- return err;
+ return 0;
}
-EXPORT_SYMBOL(gpmc_cs_configure);
+EXPORT_SYMBOL(gpmc_configure);
void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
{
@@ -716,7 +720,7 @@ static int gpmc_setup_irq(void)
return -EINVAL;
gpmc_irq_start = irq_alloc_descs(-1, 0, GPMC_NR_IRQ, 0);
- if (IS_ERR_VALUE(gpmc_irq_start)) {
+ if (gpmc_irq_start < 0) {
pr_err("irq_alloc_descs failed\n");
return gpmc_irq_start;
}
@@ -781,16 +785,16 @@ static void gpmc_mem_exit(void)
}
-static int gpmc_mem_init(void)
+static void gpmc_mem_init(void)
{
- int cs, rc;
- unsigned long boot_rom_space = 0;
+ int cs;
- /* never allocate the first page, to facilitate bug detection;
- * even if we didn't boot from ROM.
+ /*
+ * The first 1MB of GPMC address space is typically mapped to
+ * the internal ROM. Never allocate the first page, to
+ * facilitate bug detection; even if we didn't boot from ROM.
*/
- boot_rom_space = BOOT_ROM_SPACE;
- gpmc_mem_root.start = GPMC_MEM_START + boot_rom_space;
+ gpmc_mem_root.start = SZ_1M;
gpmc_mem_root.end = GPMC_MEM_END;
/* Reserve all regions that has been set up by bootloader */
@@ -800,16 +804,12 @@ static int gpmc_mem_init(void)
if (!gpmc_cs_mem_enabled(cs))
continue;
gpmc_cs_get_memconf(cs, &base, &size);
- rc = gpmc_cs_insert_mem(cs, base, size);
- if (IS_ERR_VALUE(rc)) {
- while (--cs >= 0)
- if (gpmc_cs_mem_enabled(cs))
- gpmc_cs_delete_mem(cs);
- return rc;
+ if (gpmc_cs_insert_mem(cs, base, size)) {
+ pr_warn("%s: disabling cs %d mapped at 0x%x-0x%x\n",
+ __func__, cs, base, base + size);
+ gpmc_cs_disable_mem(cs);
}
}
-
- return 0;
}
static u32 gpmc_round_ps_to_sync_clk(u32 time_ps, u32 sync_clk)
@@ -825,9 +825,9 @@ static u32 gpmc_round_ps_to_sync_clk(u32 time_ps, u32 sync_clk)
/* XXX: can the cycles be avoided ? */
static int gpmc_calc_sync_read_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t)
+ struct gpmc_device_timings *dev_t,
+ bool mux)
{
- bool mux = dev_t->mux;
u32 temp;
/* adv_rd_off */
@@ -880,9 +880,9 @@ static int gpmc_calc_sync_read_timings(struct gpmc_timings *gpmc_t,
}
static int gpmc_calc_sync_write_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t)
+ struct gpmc_device_timings *dev_t,
+ bool mux)
{
- bool mux = dev_t->mux;
u32 temp;
/* adv_wr_off */
@@ -942,9 +942,9 @@ static int gpmc_calc_sync_write_timings(struct gpmc_timings *gpmc_t,
}
static int gpmc_calc_async_read_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t)
+ struct gpmc_device_timings *dev_t,
+ bool mux)
{
- bool mux = dev_t->mux;
u32 temp;
/* adv_rd_off */
@@ -982,9 +982,9 @@ static int gpmc_calc_async_read_timings(struct gpmc_timings *gpmc_t,
}
static int gpmc_calc_async_write_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t)
+ struct gpmc_device_timings *dev_t,
+ bool mux)
{
- bool mux = dev_t->mux;
u32 temp;
/* adv_wr_off */
@@ -1054,7 +1054,8 @@ static int gpmc_calc_sync_common_timings(struct gpmc_timings *gpmc_t,
}
static int gpmc_calc_common_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t)
+ struct gpmc_device_timings *dev_t,
+ bool sync)
{
u32 temp;
@@ -1068,7 +1069,7 @@ static int gpmc_calc_common_timings(struct gpmc_timings *gpmc_t,
gpmc_t->cs_on + dev_t->t_ce_avd);
gpmc_t->adv_on = gpmc_round_ps_to_ticks(temp);
- if (dev_t->sync_write || dev_t->sync_read)
+ if (sync)
gpmc_calc_sync_common_timings(gpmc_t, dev_t);
return 0;
@@ -1103,21 +1104,29 @@ static void gpmc_convert_ps_to_ns(struct gpmc_timings *t)
}
int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t)
+ struct gpmc_settings *gpmc_s,
+ struct gpmc_device_timings *dev_t)
{
+ bool mux = false, sync = false;
+
+ if (gpmc_s) {
+ mux = gpmc_s->mux_add_data ? true : false;
+ sync = (gpmc_s->sync_read || gpmc_s->sync_write);
+ }
+
memset(gpmc_t, 0, sizeof(*gpmc_t));
- gpmc_calc_common_timings(gpmc_t, dev_t);
+ gpmc_calc_common_timings(gpmc_t, dev_t, sync);
- if (dev_t->sync_read)
- gpmc_calc_sync_read_timings(gpmc_t, dev_t);
+ if (gpmc_s && gpmc_s->sync_read)
+ gpmc_calc_sync_read_timings(gpmc_t, dev_t, mux);
else
- gpmc_calc_async_read_timings(gpmc_t, dev_t);
+ gpmc_calc_async_read_timings(gpmc_t, dev_t, mux);
- if (dev_t->sync_write)
- gpmc_calc_sync_write_timings(gpmc_t, dev_t);
+ if (gpmc_s && gpmc_s->sync_write)
+ gpmc_calc_sync_write_timings(gpmc_t, dev_t, mux);
else
- gpmc_calc_async_write_timings(gpmc_t, dev_t);
+ gpmc_calc_async_write_timings(gpmc_t, dev_t, mux);
/* TODO: remove, see function definition */
gpmc_convert_ps_to_ns(gpmc_t);
@@ -1125,6 +1134,90 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
return 0;
}
+/**
+ * gpmc_cs_program_settings - programs non-timing related settings
+ * @cs: GPMC chip-select to program
+ * @p: pointer to GPMC settings structure
+ *
+ * Programs non-timing related settings for a GPMC chip-select, such as
+ * bus-width, burst configuration, etc. Function should be called once
+ * for each chip-select that is being used and must be called before
+ * calling gpmc_cs_set_timings() as timing parameters in the CONFIG1
+ * register will be initialised to zero by this function. Returns 0 on
+ * success and appropriate negative error code on failure.
+ */
+int gpmc_cs_program_settings(int cs, struct gpmc_settings *p)
+{
+ u32 config1;
+
+ if ((!p->device_width) || (p->device_width > GPMC_DEVWIDTH_16BIT)) {
+ pr_err("%s: invalid width %d!", __func__, p->device_width);
+ return -EINVAL;
+ }
+
+ /* Address-data multiplexing not supported for NAND devices */
+ if (p->device_nand && p->mux_add_data) {
+ pr_err("%s: invalid configuration!\n", __func__);
+ return -EINVAL;
+ }
+
+ if ((p->mux_add_data > GPMC_MUX_AD) ||
+ ((p->mux_add_data == GPMC_MUX_AAD) &&
+ !(gpmc_capability & GPMC_HAS_MUX_AAD))) {
+ pr_err("%s: invalid multiplex configuration!\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Page/burst mode supports lengths of 4, 8 and 16 bytes */
+ if (p->burst_read || p->burst_write) {
+ switch (p->burst_len) {
+ case GPMC_BURST_4:
+ case GPMC_BURST_8:
+ case GPMC_BURST_16:
+ break;
+ default:
+ pr_err("%s: invalid page/burst-length (%d)\n",
+ __func__, p->burst_len);
+ return -EINVAL;
+ }
+ }
+
+ if ((p->wait_on_read || p->wait_on_write) &&
+ (p->wait_pin > gpmc_nr_waitpins)) {
+ pr_err("%s: invalid wait-pin (%d)\n", __func__, p->wait_pin);
+ return -EINVAL;
+ }
+
+ config1 = GPMC_CONFIG1_DEVICESIZE((p->device_width - 1));
+
+ if (p->sync_read)
+ config1 |= GPMC_CONFIG1_READTYPE_SYNC;
+ if (p->sync_write)
+ config1 |= GPMC_CONFIG1_WRITETYPE_SYNC;
+ if (p->wait_on_read)
+ config1 |= GPMC_CONFIG1_WAIT_READ_MON;
+ if (p->wait_on_write)
+ config1 |= GPMC_CONFIG1_WAIT_WRITE_MON;
+ if (p->wait_on_read || p->wait_on_write)
+ config1 |= GPMC_CONFIG1_WAIT_PIN_SEL(p->wait_pin);
+ if (p->device_nand)
+ config1 |= GPMC_CONFIG1_DEVICETYPE(GPMC_DEVICETYPE_NAND);
+ if (p->mux_add_data)
+ config1 |= GPMC_CONFIG1_MUXTYPE(p->mux_add_data);
+ if (p->burst_read)
+ config1 |= GPMC_CONFIG1_READMULTIPLE_SUPP;
+ if (p->burst_write)
+ config1 |= GPMC_CONFIG1_WRITEMULTIPLE_SUPP;
+ if (p->burst_read || p->burst_write) {
+ config1 |= GPMC_CONFIG1_PAGE_LEN(p->burst_len >> 3);
+ config1 |= p->burst_wrap ? GPMC_CONFIG1_WRAPBURST_SUPP : 0;
+ }
+
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, config1);
+
+ return 0;
+}
+
#ifdef CONFIG_OF
static struct of_device_id gpmc_dt_ids[] = {
{ .compatible = "ti,omap2420-gpmc" },
@@ -1136,70 +1229,110 @@ static struct of_device_id gpmc_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, gpmc_dt_ids);
+/**
+ * gpmc_read_settings_dt - read gpmc settings from device-tree
+ * @np: pointer to device-tree node for a gpmc child device
+ * @p: pointer to gpmc settings structure
+ *
+ * Reads the GPMC settings for a GPMC child device from device-tree and
+ * stores them in the GPMC settings structure passed. The GPMC settings
+ * structure is initialised to zero by this function and so any
+ * previously stored settings will be cleared.
+ */
+void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p)
+{
+ memset(p, 0, sizeof(struct gpmc_settings));
+
+ p->sync_read = of_property_read_bool(np, "gpmc,sync-read");
+ p->sync_write = of_property_read_bool(np, "gpmc,sync-write");
+ p->device_nand = of_property_read_bool(np, "gpmc,device-nand");
+ of_property_read_u32(np, "gpmc,device-width", &p->device_width);
+ of_property_read_u32(np, "gpmc,mux-add-data", &p->mux_add_data);
+
+ if (!of_property_read_u32(np, "gpmc,burst-length", &p->burst_len)) {
+ p->burst_wrap = of_property_read_bool(np, "gpmc,burst-wrap");
+ p->burst_read = of_property_read_bool(np, "gpmc,burst-read");
+ p->burst_write = of_property_read_bool(np, "gpmc,burst-write");
+ if (!p->burst_read && !p->burst_write)
+ pr_warn("%s: page/burst-length set but not used!\n",
+ __func__);
+ }
+
+ if (!of_property_read_u32(np, "gpmc,wait-pin", &p->wait_pin)) {
+ p->wait_on_read = of_property_read_bool(np,
+ "gpmc,wait-on-read");
+ p->wait_on_write = of_property_read_bool(np,
+ "gpmc,wait-on-write");
+ if (!p->wait_on_read && !p->wait_on_write)
+ pr_warn("%s: read/write wait monitoring not enabled!\n",
+ __func__);
+ }
+}
+
static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
struct gpmc_timings *gpmc_t)
{
- u32 val;
+ struct gpmc_bool_timings *p;
+
+ if (!np || !gpmc_t)
+ return;
memset(gpmc_t, 0, sizeof(*gpmc_t));
/* minimum clock period for syncronous mode */
- if (!of_property_read_u32(np, "gpmc,sync-clk", &val))
- gpmc_t->sync_clk = val;
+ of_property_read_u32(np, "gpmc,sync-clk-ps", &gpmc_t->sync_clk);
/* chip select timtings */
- if (!of_property_read_u32(np, "gpmc,cs-on", &val))
- gpmc_t->cs_on = val;
-
- if (!of_property_read_u32(np, "gpmc,cs-rd-off", &val))
- gpmc_t->cs_rd_off = val;
-
- if (!of_property_read_u32(np, "gpmc,cs-wr-off", &val))
- gpmc_t->cs_wr_off = val;
+ of_property_read_u32(np, "gpmc,cs-on-ns", &gpmc_t->cs_on);
+ of_property_read_u32(np, "gpmc,cs-rd-off-ns", &gpmc_t->cs_rd_off);
+ of_property_read_u32(np, "gpmc,cs-wr-off-ns", &gpmc_t->cs_wr_off);
/* ADV signal timings */
- if (!of_property_read_u32(np, "gpmc,adv-on", &val))
- gpmc_t->adv_on = val;
-
- if (!of_property_read_u32(np, "gpmc,adv-rd-off", &val))
- gpmc_t->adv_rd_off = val;
-
- if (!of_property_read_u32(np, "gpmc,adv-wr-off", &val))
- gpmc_t->adv_wr_off = val;
+ of_property_read_u32(np, "gpmc,adv-on-ns", &gpmc_t->adv_on);
+ of_property_read_u32(np, "gpmc,adv-rd-off-ns", &gpmc_t->adv_rd_off);
+ of_property_read_u32(np, "gpmc,adv-wr-off-ns", &gpmc_t->adv_wr_off);
/* WE signal timings */
- if (!of_property_read_u32(np, "gpmc,we-on", &val))
- gpmc_t->we_on = val;
-
- if (!of_property_read_u32(np, "gpmc,we-off", &val))
- gpmc_t->we_off = val;
+ of_property_read_u32(np, "gpmc,we-on-ns", &gpmc_t->we_on);
+ of_property_read_u32(np, "gpmc,we-off-ns", &gpmc_t->we_off);
/* OE signal timings */
- if (!of_property_read_u32(np, "gpmc,oe-on", &val))
- gpmc_t->oe_on = val;
-
- if (!of_property_read_u32(np, "gpmc,oe-off", &val))
- gpmc_t->oe_off = val;
+ of_property_read_u32(np, "gpmc,oe-on-ns", &gpmc_t->oe_on);
+ of_property_read_u32(np, "gpmc,oe-off-ns", &gpmc_t->oe_off);
/* access and cycle timings */
- if (!of_property_read_u32(np, "gpmc,page-burst-access", &val))
- gpmc_t->page_burst_access = val;
-
- if (!of_property_read_u32(np, "gpmc,access", &val))
- gpmc_t->access = val;
-
- if (!of_property_read_u32(np, "gpmc,rd-cycle", &val))
- gpmc_t->rd_cycle = val;
-
- if (!of_property_read_u32(np, "gpmc,wr-cycle", &val))
- gpmc_t->wr_cycle = val;
-
- /* only for OMAP3430 */
- if (!of_property_read_u32(np, "gpmc,wr-access", &val))
- gpmc_t->wr_access = val;
-
- if (!of_property_read_u32(np, "gpmc,wr-data-mux-bus", &val))
- gpmc_t->wr_data_mux_bus = val;
+ of_property_read_u32(np, "gpmc,page-burst-access-ns",
+ &gpmc_t->page_burst_access);
+ of_property_read_u32(np, "gpmc,access-ns", &gpmc_t->access);
+ of_property_read_u32(np, "gpmc,rd-cycle-ns", &gpmc_t->rd_cycle);
+ of_property_read_u32(np, "gpmc,wr-cycle-ns", &gpmc_t->wr_cycle);
+ of_property_read_u32(np, "gpmc,bus-turnaround-ns",
+ &gpmc_t->bus_turnaround);
+ of_property_read_u32(np, "gpmc,cycle2cycle-delay-ns",
+ &gpmc_t->cycle2cycle_delay);
+ of_property_read_u32(np, "gpmc,wait-monitoring-ns",
+ &gpmc_t->wait_monitoring);
+ of_property_read_u32(np, "gpmc,clk-activation-ns",
+ &gpmc_t->clk_activation);
+
+ /* only applicable to OMAP3+ */
+ of_property_read_u32(np, "gpmc,wr-access-ns", &gpmc_t->wr_access);
+ of_property_read_u32(np, "gpmc,wr-data-mux-bus-ns",
+ &gpmc_t->wr_data_mux_bus);
+
+ /* bool timing parameters */
+ p = &gpmc_t->bool_timings;
+
+ p->cycle2cyclediffcsen =
+ of_property_read_bool(np, "gpmc,cycle2cycle-diffcsen");
+ p->cycle2cyclesamecsen =
+ of_property_read_bool(np, "gpmc,cycle2cycle-samecsen");
+ p->we_extra_delay = of_property_read_bool(np, "gpmc,we-extra-delay");
+ p->oe_extra_delay = of_property_read_bool(np, "gpmc,oe-extra-delay");
+ p->adv_extra_delay = of_property_read_bool(np, "gpmc,adv-extra-delay");
+ p->cs_extra_delay = of_property_read_bool(np, "gpmc,cs-extra-delay");
+ p->time_para_granularity =
+ of_property_read_bool(np, "gpmc,time-para-granularity");
}
#ifdef CONFIG_MTD_NAND
@@ -1295,6 +1428,81 @@ static int gpmc_probe_onenand_child(struct platform_device *pdev,
}
#endif
+/**
+ * gpmc_probe_generic_child - configures the gpmc for a child device
+ * @pdev: pointer to gpmc platform device
+ * @child: pointer to device-tree node for child device
+ *
+ * Allocates and configures a GPMC chip-select for a child device.
+ * Returns 0 on success and appropriate negative error code on failure.
+ */
+static int gpmc_probe_generic_child(struct platform_device *pdev,
+ struct device_node *child)
+{
+ struct gpmc_settings gpmc_s;
+ struct gpmc_timings gpmc_t;
+ struct resource res;
+ unsigned long base;
+ int ret, cs;
+
+ if (of_property_read_u32(child, "reg", &cs) < 0) {
+ dev_err(&pdev->dev, "%s has no 'reg' property\n",
+ child->full_name);
+ return -ENODEV;
+ }
+
+ if (of_address_to_resource(child, 0, &res) < 0) {
+ dev_err(&pdev->dev, "%s has malformed 'reg' property\n",
+ child->full_name);
+ return -ENODEV;
+ }
+
+ ret = gpmc_cs_request(cs, resource_size(&res), &base);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs);
+ return ret;
+ }
+
+ /*
+ * FIXME: gpmc_cs_request() will map the CS to an arbitary
+ * location in the gpmc address space. When booting with
+ * device-tree we want the NOR flash to be mapped to the
+ * location specified in the device-tree blob. So remap the
+ * CS to this location. Once DT migration is complete should
+ * just make gpmc_cs_request() map a specific address.
+ */
+ ret = gpmc_cs_remap(cs, res.start);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot remap GPMC CS %d to 0x%x\n",
+ cs, res.start);
+ goto err;
+ }
+
+ gpmc_read_settings_dt(child, &gpmc_s);
+
+ ret = of_property_read_u32(child, "bank-width", &gpmc_s.device_width);
+ if (ret < 0)
+ goto err;
+
+ ret = gpmc_cs_program_settings(cs, &gpmc_s);
+ if (ret < 0)
+ goto err;
+
+ gpmc_read_timings_dt(child, &gpmc_t);
+ gpmc_cs_set_timings(cs, &gpmc_t);
+
+ if (of_platform_device_create(child, NULL, &pdev->dev))
+ return 0;
+
+ dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name);
+ ret = -ENODEV;
+
+err:
+ gpmc_cs_free(cs);
+
+ return ret;
+}
+
static int gpmc_probe_dt(struct platform_device *pdev)
{
int ret;
@@ -1305,6 +1513,13 @@ static int gpmc_probe_dt(struct platform_device *pdev)
if (!of_id)
return 0;
+ ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-waitpins",
+ &gpmc_nr_waitpins);
+ if (ret < 0) {
+ pr_err("%s: number of wait pins not found!\n", __func__);
+ return ret;
+ }
+
for_each_node_by_name(child, "nand") {
ret = gpmc_probe_nand_child(pdev, child);
if (ret < 0) {
@@ -1320,6 +1535,23 @@ static int gpmc_probe_dt(struct platform_device *pdev)
return ret;
}
}
+
+ for_each_node_by_name(child, "nor") {
+ ret = gpmc_probe_generic_child(pdev, child);
+ if (ret < 0) {
+ of_node_put(child);
+ return ret;
+ }
+ }
+
+ for_each_node_by_name(child, "ethernet") {
+ ret = gpmc_probe_generic_child(pdev, child);
+ if (ret < 0) {
+ of_node_put(child);
+ return ret;
+ }
+ }
+
return 0;
}
#else
@@ -1364,25 +1596,37 @@ static int gpmc_probe(struct platform_device *pdev)
gpmc_dev = &pdev->dev;
l = gpmc_read_reg(GPMC_REVISION);
+
+ /*
+ * FIXME: Once device-tree migration is complete the below flags
+ * should be populated based upon the device-tree compatible
+ * string. For now just use the IP revision. OMAP3+ devices have
+ * the wr_access and wr_data_mux_bus register fields. OMAP4+
+ * devices support the addr-addr-data multiplex protocol.
+ *
+ * GPMC IP revisions:
+ * - OMAP24xx = 2.0
+ * - OMAP3xxx = 5.0
+ * - OMAP44xx/54xx/AM335x = 6.0
+ */
if (GPMC_REVISION_MAJOR(l) > 0x4)
gpmc_capability = GPMC_HAS_WR_ACCESS | GPMC_HAS_WR_DATA_MUX_BUS;
+ if (GPMC_REVISION_MAJOR(l) > 0x5)
+ gpmc_capability |= GPMC_HAS_MUX_AAD;
dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l),
GPMC_REVISION_MINOR(l));
- rc = gpmc_mem_init();
- if (IS_ERR_VALUE(rc)) {
- clk_disable_unprepare(gpmc_l3_clk);
- clk_put(gpmc_l3_clk);
- dev_err(gpmc_dev, "failed to reserve memory\n");
- return rc;
- }
+ gpmc_mem_init();
- if (IS_ERR_VALUE(gpmc_setup_irq()))
+ if (gpmc_setup_irq() < 0)
dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
/* Now the GPMC is initialised, unreserve the chip-selects */
gpmc_cs_map = 0;
+ if (!pdev->dev.of_node)
+ gpmc_nr_waitpins = GPMC_NR_WAITPINS;
+
rc = gpmc_probe_dt(pdev);
if (rc < 0) {
clk_disable_unprepare(gpmc_l3_clk);
diff --git a/arch/arm/mach-omap2/gpmc.h b/arch/arm/mach-omap2/gpmc.h
index fe0a844..707f6d5 100644
--- a/arch/arm/mach-omap2/gpmc.h
+++ b/arch/arm/mach-omap2/gpmc.h
@@ -58,7 +58,7 @@
#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1)
#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10)
#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0)
-#define GPMC_CONFIG1_MUXADDDATA (1 << 9)
+#define GPMC_CONFIG1_MUXTYPE(val) ((val & 3) << 8)
#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4)
#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3)
#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1))
@@ -73,6 +73,13 @@
#define GPMC_IRQ_FIFOEVENTENABLE 0x01
#define GPMC_IRQ_COUNT_EVENT 0x02
+#define GPMC_BURST_4 4 /* 4 word burst */
+#define GPMC_BURST_8 8 /* 8 word burst */
+#define GPMC_BURST_16 16 /* 16 word burst */
+#define GPMC_DEVWIDTH_8BIT 1 /* 8-bit device width */
+#define GPMC_DEVWIDTH_16BIT 2 /* 16-bit device width */
+#define GPMC_MUX_AAD 1 /* Addr-Addr-Data multiplex */
+#define GPMC_MUX_AD 2 /* Addr-Data multiplex */
/* bool type time settings */
struct gpmc_bool_timings {
@@ -178,10 +185,6 @@ struct gpmc_device_timings {
u8 cyc_wpl; /* write deassertion time in cycles */
u32 cyc_iaa; /* initial access time in cycles */
- bool mux; /* address & data muxed */
- bool sync_write;/* synchronous write */
- bool sync_read; /* synchronous read */
-
/* extra delays */
bool ce_xdelay;
bool avd_xdelay;
@@ -189,28 +192,40 @@ struct gpmc_device_timings {
bool we_xdelay;
};
+struct gpmc_settings {
+ bool burst_wrap; /* enables wrap bursting */
+ bool burst_read; /* enables read page/burst mode */
+ bool burst_write; /* enables write page/burst mode */
+ bool device_nand; /* device is NAND */
+ bool sync_read; /* enables synchronous reads */
+ bool sync_write; /* enables synchronous writes */
+ bool wait_on_read; /* monitor wait on reads */
+ bool wait_on_write; /* monitor wait on writes */
+ u32 burst_len; /* page/burst length */
+ u32 device_width; /* device bus width (8 or 16 bit) */
+ u32 mux_add_data; /* multiplex address & data */
+ u32 wait_pin; /* wait-pin to be used */
+};
+
extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t);
+ struct gpmc_settings *gpmc_s,
+ struct gpmc_device_timings *dev_t);
extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
extern int gpmc_get_client_irq(unsigned irq_config);
-extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
-extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps);
extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
-extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
-extern unsigned long gpmc_get_fclk_period(void);
extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
-extern u32 gpmc_cs_read_reg(int cs, int idx);
extern int gpmc_calc_divider(unsigned int sync_clk);
extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
+extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p);
extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
extern void gpmc_cs_free(int cs);
-extern int gpmc_cs_set_reserved(int cs, int reserved);
-extern int gpmc_cs_reserved(int cs);
extern void omap3_gpmc_save_context(void);
extern void omap3_gpmc_restore_context(void);
-extern int gpmc_cs_configure(int cs, int cmd, int wval);
+extern int gpmc_configure(int cmd, int wval);
+extern void gpmc_read_settings_dt(struct device_node *np,
+ struct gpmc_settings *p);
#endif
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 381be7a..eeea4fa 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -131,7 +131,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
int oh_cnt, i, ret = 0;
oh_cnt = of_property_count_strings(node, "ti,hwmods");
- if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) {
+ if (oh_cnt <= 0) {
dev_dbg(&pdev->dev, "No 'hwmods' to build omap_device\n");
return -ENODEV;
}
@@ -815,20 +815,17 @@ struct device *omap_device_get_by_hwmod_name(const char *oh_name)
}
oh = omap_hwmod_lookup(oh_name);
- if (IS_ERR_OR_NULL(oh)) {
+ if (!oh) {
WARN(1, "%s: no hwmod for %s\n", __func__,
oh_name);
- return ERR_PTR(oh ? PTR_ERR(oh) : -ENODEV);
+ return ERR_PTR(-ENODEV);
}
- if (IS_ERR_OR_NULL(oh->od)) {
+ if (!oh->od) {
WARN(1, "%s: no omap_device for %s\n", __func__,
oh_name);
- return ERR_PTR(oh->od ? PTR_ERR(oh->od) : -ENODEV);
+ return ERR_PTR(-ENODEV);
}
- if (IS_ERR_OR_NULL(oh->od->pdev))
- return ERR_PTR(oh->od->pdev ? PTR_ERR(oh->od->pdev) : -ENODEV);
-
return &oh->od->pdev->dev;
}
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 5f33c2d..3f50f68 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1662,7 +1662,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
return -ENOSYS;
ret = _lookup_hardreset(oh, name, &ohri);
- if (IS_ERR_VALUE(ret))
+ if (ret < 0)
return ret;
if (oh->clkdm) {
@@ -2412,7 +2412,7 @@ static int __init _init(struct omap_hwmod *oh, void *data)
_init_mpu_rt_base(oh, NULL);
r = _init_clocks(oh, NULL);
- if (IS_ERR_VALUE(r)) {
+ if (r < 0) {
WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh->name);
return -EINVAL;
}
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 1edd000..0b33986 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -217,7 +217,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir)
return 0;
d = debugfs_create_dir(pwrdm->name, (struct dentry *)dir);
- if (!(IS_ERR_OR_NULL(d)))
+ if (d)
(void) debugfs_create_file("suspend", S_IRUGO|S_IWUSR, d,
(void *)pwrdm, &pwrdm_suspend_fops);
@@ -261,8 +261,8 @@ static int __init pm_dbg_init(void)
return 0;
d = debugfs_create_dir("pm_debug", NULL);
- if (IS_ERR_OR_NULL(d))
- return PTR_ERR(d);
+ if (!d)
+ return -EINVAL;
(void) debugfs_create_file("count", S_IRUGO,
d, (void *)DEBUG_FILE_COUNTERS, &debug_fops);
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 89cad4a..86babd7 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -1180,7 +1180,7 @@ bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm)
{
int i;
- if (IS_ERR_OR_NULL(pwrdm)) {
+ if (!pwrdm) {
pr_debug("powerdomain: %s: invalid powerdomain pointer\n",
__func__);
return 1;
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index d00d89c..fdf1c03 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -46,7 +46,6 @@
#include <asm/smp_twd.h>
#include <asm/sched_clock.h>
-#include <asm/arch_timer.h>
#include "omap_hwmod.h"
#include "omap_device.h"
#include <plat/counter-32k.h>
@@ -57,16 +56,6 @@
#include "common.h"
#include "powerdomain.h"
-/* Parent clocks, eventually these will come from the clock framework */
-
-#define OMAP2_MPU_SOURCE "sys_ck"
-#define OMAP3_MPU_SOURCE OMAP2_MPU_SOURCE
-#define OMAP4_MPU_SOURCE "sys_clkin_ck"
-#define OMAP5_MPU_SOURCE "sys_clkin"
-#define OMAP2_32K_SOURCE "func_32k_ck"
-#define OMAP3_32K_SOURCE "omap_32k_fck"
-#define OMAP4_32K_SOURCE "sys_32k_ck"
-
#define REALTIME_COUNTER_BASE 0x48243200
#define INCREMENTER_NUMERATOR_OFFSET 0x10
#define INCREMENTER_DENUMERATOR_RELOAD_OFFSET 0x14
@@ -130,7 +119,6 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
}
static struct clock_event_device clockevent_gpt = {
- .name = "gp_timer",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.rating = 300,
.set_next_event = omap2_gp_timer_set_next_event,
@@ -171,6 +159,12 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match,
if (property && !of_get_property(np, property, NULL))
continue;
+ if (!property && (of_get_property(np, "ti,timer-alwon", NULL) ||
+ of_get_property(np, "ti,timer-dsp", NULL) ||
+ of_get_property(np, "ti,timer-pwm", NULL) ||
+ of_get_property(np, "ti,timer-secure", NULL)))
+ continue;
+
of_add_property(np, &device_disabled);
return np;
}
@@ -215,16 +209,17 @@ static u32 __init omap_dm_timer_get_errata(void)
}
static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
- int gptimer_id,
- const char *fck_source,
- const char *property,
- int posted)
+ const char *fck_source,
+ const char *property,
+ const char **timer_name,
+ int posted)
{
char name[10]; /* 10 = sizeof("gptXX_Xck0") */
const char *oh_name;
struct device_node *np;
struct omap_hwmod *oh;
struct resource irq, mem;
+ struct clk *src;
int r = 0;
if (of_have_populated_dt()) {
@@ -244,10 +239,10 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
of_node_put(np);
} else {
- if (omap_dm_timer_reserve_systimer(gptimer_id))
+ if (omap_dm_timer_reserve_systimer(timer->id))
return -ENODEV;
- sprintf(name, "timer%d", gptimer_id);
+ sprintf(name, "timer%d", timer->id);
oh_name = name;
}
@@ -255,6 +250,8 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
if (!oh)
return -ENODEV;
+ *timer_name = oh->name;
+
if (!of_have_populated_dt()) {
r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL,
&irq);
@@ -277,24 +274,24 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
/* After the dmtimer is using hwmod these clocks won't be needed */
timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh));
if (IS_ERR(timer->fclk))
- return -ENODEV;
+ return PTR_ERR(timer->fclk);
- /* FIXME: Need to remove hard-coded test on timer ID */
- if (gptimer_id != 12) {
- struct clk *src;
-
- src = clk_get(NULL, fck_source);
- if (IS_ERR(src)) {
- r = -EINVAL;
- } else {
- r = clk_set_parent(timer->fclk, src);
- if (IS_ERR_VALUE(r))
- pr_warn("%s: %s cannot set source\n",
- __func__, oh->name);
+ src = clk_get(NULL, fck_source);
+ if (IS_ERR(src))
+ return PTR_ERR(src);
+
+ if (clk_get_parent(timer->fclk) != src) {
+ r = clk_set_parent(timer->fclk, src);
+ if (r < 0) {
+ pr_warn("%s: %s cannot set source\n", __func__,
+ oh->name);
clk_put(src);
+ return r;
}
}
+ clk_put(src);
+
omap_hwmod_setup_one(oh_name);
omap_hwmod_enable(oh);
__omap_dm_timer_init_regs(timer);
@@ -318,6 +315,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
{
int res;
+ clkev.id = gptimer_id;
clkev.errata = omap_dm_timer_get_errata();
/*
@@ -327,8 +325,8 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
*/
__omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767);
- res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source, property,
- OMAP_TIMER_POSTED);
+ res = omap_dm_timer_init_one(&clkev, fck_source, property,
+ &clockevent_gpt.name, OMAP_TIMER_POSTED);
BUG_ON(res);
omap2_gp_timer_irq.dev_id = &clkev;
@@ -342,8 +340,8 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
3, /* Timer internal resynch latency */
0xffffffff);
- pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n",
- gptimer_id, clkev.rate);
+ pr_info("OMAP clockevent source: %s at %lu Hz\n", clockevent_gpt.name,
+ clkev.rate);
}
/* Clocksource code */
@@ -360,7 +358,6 @@ static cycle_t clocksource_read_cycles(struct clocksource *cs)
}
static struct clocksource clocksource_gpt = {
- .name = "gp_timer",
.rating = 300,
.read = clocksource_read_cycles,
.mask = CLOCKSOURCE_MASK(32),
@@ -443,13 +440,16 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
}
static void __init omap2_gptimer_clocksource_init(int gptimer_id,
- const char *fck_source)
+ const char *fck_source,
+ const char *property)
{
int res;
+ clksrc.id = gptimer_id;
clksrc.errata = omap_dm_timer_get_errata();
- res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source, NULL,
+ res = omap_dm_timer_init_one(&clksrc, fck_source, property,
+ &clocksource_gpt.name,
OMAP_TIMER_NONPOSTED);
BUG_ON(res);
@@ -462,8 +462,8 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id,
pr_err("Could not register clocksource %s\n",
clocksource_gpt.name);
else
- pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n",
- gptimer_id, clksrc.rate);
+ pr_info("OMAP clocksource: %s at %lu Hz\n",
+ clocksource_gpt.name, clksrc.rate);
}
#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
@@ -488,7 +488,7 @@ static void __init realtime_counter_init(void)
pr_err("%s: ioremap failed\n", __func__);
return;
}
- sys_clk = clk_get(NULL, OMAP5_MPU_SOURCE);
+ sys_clk = clk_get(NULL, "sys_clkin");
if (IS_ERR(sys_clk)) {
pr_err("%s: failed to get system clock handle\n", __func__);
iounmap(base);
@@ -545,18 +545,19 @@ static inline void __init realtime_counter_init(void)
#endif
#define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \
- clksrc_nr, clksrc_src) \
+ clksrc_nr, clksrc_src, clksrc_prop) \
void __init omap##name##_gptimer_timer_init(void) \
{ \
if (omap_clk_init) \
omap_clk_init(); \
omap_dmtimer_init(); \
omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
- omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src); \
+ omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \
+ clksrc_prop); \
}
#define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \
- clksrc_nr, clksrc_src) \
+ clksrc_nr, clksrc_src, clksrc_prop) \
void __init omap##name##_sync32k_timer_init(void) \
{ \
if (omap_clk_init) \
@@ -565,33 +566,35 @@ void __init omap##name##_sync32k_timer_init(void) \
omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
/* Enable the use of clocksource="gp_timer" kernel parameter */ \
if (use_gptimer_clksrc) \
- omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src);\
+ omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \
+ clksrc_prop); \
else \
omap2_sync32k_clocksource_init(); \
}
#ifdef CONFIG_ARCH_OMAP2
-OMAP_SYS_32K_TIMER_INIT(2, 1, OMAP2_32K_SOURCE, "ti,timer-alwon",
- 2, OMAP2_MPU_SOURCE);
+OMAP_SYS_32K_TIMER_INIT(2, 1, "timer_32k_ck", "ti,timer-alwon",
+ 2, "timer_sys_ck", NULL);
#endif /* CONFIG_ARCH_OMAP2 */
#ifdef CONFIG_ARCH_OMAP3
-OMAP_SYS_32K_TIMER_INIT(3, 1, OMAP3_32K_SOURCE, "ti,timer-alwon",
- 2, OMAP3_MPU_SOURCE);
-OMAP_SYS_32K_TIMER_INIT(3_secure, 12, OMAP3_32K_SOURCE, "ti,timer-secure",
- 2, OMAP3_MPU_SOURCE);
-OMAP_SYS_GP_TIMER_INIT(3_gp, 1, OMAP3_MPU_SOURCE, "ti,timer-alwon",
- 2, OMAP3_MPU_SOURCE);
+OMAP_SYS_32K_TIMER_INIT(3, 1, "timer_32k_ck", "ti,timer-alwon",
+ 2, "timer_sys_ck", NULL);
+OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure",
+ 2, "timer_sys_ck", NULL);
#endif /* CONFIG_ARCH_OMAP3 */
-#ifdef CONFIG_SOC_AM33XX
-OMAP_SYS_GP_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, "ti,timer-alwon",
- 2, OMAP4_MPU_SOURCE);
-#endif /* CONFIG_SOC_AM33XX */
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
+OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL,
+ 1, "timer_sys_ck", "ti,timer-alwon");
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon",
+ 2, "sys_clkin_ck", NULL);
+#endif
#ifdef CONFIG_ARCH_OMAP4
-OMAP_SYS_32K_TIMER_INIT(4, 1, OMAP4_32K_SOURCE, "ti,timer-alwon",
- 2, OMAP4_MPU_SOURCE);
#ifdef CONFIG_LOCAL_TIMERS
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29);
void __init omap4_local_timer_init(void)
@@ -602,7 +605,7 @@ void __init omap4_local_timer_init(void)
int err;
if (of_have_populated_dt()) {
- twd_local_timer_of_register();
+ clocksource_of_init();
return;
}
@@ -620,18 +623,12 @@ void __init omap4_local_timer_init(void)
#endif /* CONFIG_ARCH_OMAP4 */
#ifdef CONFIG_SOC_OMAP5
-OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon",
- 2, OMAP5_MPU_SOURCE);
void __init omap5_realtime_timer_init(void)
{
- int err;
-
- omap5_sync32k_timer_init();
+ omap4_sync32k_timer_init();
realtime_counter_init();
- err = arch_timer_of_register();
- if (err)
- pr_err("%s: arch_timer_register failed %d\n", __func__, err);
+ clocksource_of_init();
}
#endif /* CONFIG_SOC_OMAP5 */
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 5706bdc..aa27d7f 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -22,8 +22,12 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
-
-#include <asm/io.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/usb/phy.h>
#include "soc.h"
#include "omap_device.h"
@@ -526,3 +530,155 @@ void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
}
#endif
+
+/* Template for PHY regulators */
+static struct fixed_voltage_config hsusb_reg_config = {
+ /* .supply_name filled later */
+ .microvolts = 3300000,
+ .gpio = -1, /* updated later */
+ .startup_delay = 70000, /* 70msec */
+ .enable_high = 1, /* updated later */
+ .enabled_at_boot = 0, /* keep in RESET */
+ /* .init_data filled later */
+};
+
+static const char *nop_name = "nop_usb_xceiv"; /* NOP PHY driver */
+static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */
+
+/**
+ * usbhs_add_regulator - Add a gpio based fixed voltage regulator device
+ * @name: name for the regulator
+ * @dev_id: device id of the device this regulator supplies power to
+ * @dev_supply: supply name that the device expects
+ * @gpio: GPIO number
+ * @polarity: 1 - Active high, 0 - Active low
+ */
+static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply,
+ int gpio, int polarity)
+{
+ struct regulator_consumer_supply *supplies;
+ struct regulator_init_data *reg_data;
+ struct fixed_voltage_config *config;
+ struct platform_device *pdev;
+ int ret;
+
+ supplies = kzalloc(sizeof(*supplies), GFP_KERNEL);
+ if (!supplies)
+ return -ENOMEM;
+
+ supplies->supply = dev_supply;
+ supplies->dev_name = dev_id;
+
+ reg_data = kzalloc(sizeof(*reg_data), GFP_KERNEL);
+ if (!reg_data)
+ return -ENOMEM;
+
+ reg_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
+ reg_data->consumer_supplies = supplies;
+ reg_data->num_consumer_supplies = 1;
+
+ config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config),
+ GFP_KERNEL);
+ if (!config)
+ return -ENOMEM;
+
+ config->supply_name = name;
+ config->gpio = gpio;
+ config->enable_high = polarity;
+ config->init_data = reg_data;
+
+ /* create a regulator device */
+ pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
+ if (!pdev)
+ return -ENOMEM;
+
+ pdev->id = PLATFORM_DEVID_AUTO;
+ pdev->name = reg_name;
+ pdev->dev.platform_data = config;
+
+ ret = platform_device_register(pdev);
+ if (ret)
+ pr_err("%s: Failed registering regulator %s for %s\n",
+ __func__, name, dev_id);
+
+ return ret;
+}
+
+int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
+{
+ char *rail_name;
+ int i, len;
+ struct platform_device *pdev;
+ char *phy_id;
+
+ /* the phy_id will be something like "nop_usb_xceiv.1" */
+ len = strlen(nop_name) + 3; /* 3 -> ".1" and NULL terminator */
+
+ for (i = 0; i < num_phys; i++) {
+
+ if (!phy->port) {
+ pr_err("%s: Invalid port 0. Must start from 1\n",
+ __func__);
+ continue;
+ }
+
+ /* do we need a NOP PHY device ? */
+ if (!gpio_is_valid(phy->reset_gpio) &&
+ !gpio_is_valid(phy->vcc_gpio))
+ continue;
+
+ /* create a NOP PHY device */
+ pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
+ if (!pdev)
+ return -ENOMEM;
+
+ pdev->id = phy->port;
+ pdev->name = nop_name;
+ pdev->dev.platform_data = phy->platform_data;
+
+ phy_id = kmalloc(len, GFP_KERNEL);
+ if (!phy_id)
+ return -ENOMEM;
+
+ scnprintf(phy_id, len, "nop_usb_xceiv.%d\n",
+ pdev->id);
+
+ if (platform_device_register(pdev)) {
+ pr_err("%s: Failed to register device %s\n",
+ __func__, phy_id);
+ continue;
+ }
+
+ usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id);
+
+ /* Do we need RESET regulator ? */
+ if (gpio_is_valid(phy->reset_gpio)) {
+
+ rail_name = kmalloc(13, GFP_KERNEL);
+ if (!rail_name)
+ return -ENOMEM;
+
+ scnprintf(rail_name, 13, "hsusb%d_reset", phy->port);
+
+ usbhs_add_regulator(rail_name, phy_id, "reset",
+ phy->reset_gpio, 1);
+ }
+
+ /* Do we need VCC regulator ? */
+ if (gpio_is_valid(phy->vcc_gpio)) {
+
+ rail_name = kmalloc(13, GFP_KERNEL);
+ if (!rail_name)
+ return -ENOMEM;
+
+ scnprintf(rail_name, 13, "hsusb%d_vcc", phy->port);
+
+ usbhs_add_regulator(rail_name, phy_id, "vcc",
+ phy->vcc_gpio, phy->vcc_polarity);
+ }
+
+ phy++;
+ }
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index c5a3c6f..e832bc7 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -8,6 +8,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/err.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/errno.h>
@@ -26,6 +27,24 @@
static u8 async_cs, sync_cs;
static unsigned refclk_psec;
+static struct gpmc_settings tusb_async = {
+ .wait_on_read = true,
+ .wait_on_write = true,
+ .device_width = GPMC_DEVWIDTH_16BIT,
+ .mux_add_data = GPMC_MUX_AD,
+};
+
+static struct gpmc_settings tusb_sync = {
+ .burst_read = true,
+ .burst_write = true,
+ .sync_read = true,
+ .sync_write = true,
+ .wait_on_read = true,
+ .wait_on_write = true,
+ .burst_len = GPMC_BURST_16,
+ .device_width = GPMC_DEVWIDTH_16BIT,
+ .mux_add_data = GPMC_MUX_AD,
+};
/* NOTE: timings are from tusb 6010 datasheet Rev 1.8, 12-Sept 2006 */
@@ -37,8 +56,6 @@ static int tusb_set_async_mode(unsigned sysclk_ps)
memset(&dev_t, 0, sizeof(dev_t));
- dev_t.mux = true;
-
dev_t.t_ceasu = 8 * 1000;
dev_t.t_avdasu = t_acsnh_advnh - 7000;
dev_t.t_ce_avd = 1000;
@@ -52,7 +69,7 @@ static int tusb_set_async_mode(unsigned sysclk_ps)
dev_t.t_wpl = 300;
dev_t.cyc_aavdh_we = 1;
- gpmc_calc_timings(&t, &dev_t);
+ gpmc_calc_timings(&t, &tusb_async, &dev_t);
return gpmc_cs_set_timings(async_cs, &t);
}
@@ -65,10 +82,6 @@ static int tusb_set_sync_mode(unsigned sysclk_ps)
memset(&dev_t, 0, sizeof(dev_t));
- dev_t.mux = true;
- dev_t.sync_read = true;
- dev_t.sync_write = true;
-
dev_t.clk = 11100;
dev_t.t_bacc = 1000;
dev_t.t_ces = 1000;
@@ -84,7 +97,7 @@ static int tusb_set_sync_mode(unsigned sysclk_ps)
dev_t.cyc_wpl = 6;
dev_t.t_ce_rdyz = 7000;
- gpmc_calc_timings(&t, &dev_t);
+ gpmc_calc_timings(&t, &tusb_sync, &dev_t);
return gpmc_cs_set_timings(sync_cs, &t);
}
@@ -165,18 +178,12 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
return status;
}
tusb_resources[0].end = tusb_resources[0].start + 0x9ff;
+ tusb_async.wait_pin = waitpin;
async_cs = async;
- gpmc_cs_write_reg(async, GPMC_CS_CONFIG1,
- GPMC_CONFIG1_PAGE_LEN(2)
- | GPMC_CONFIG1_WAIT_READ_MON
- | GPMC_CONFIG1_WAIT_WRITE_MON
- | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin)
- | GPMC_CONFIG1_READTYPE_ASYNC
- | GPMC_CONFIG1_WRITETYPE_ASYNC
- | GPMC_CONFIG1_DEVICESIZE_16
- | GPMC_CONFIG1_DEVICETYPE_NOR
- | GPMC_CONFIG1_MUXADDDATA);
+ status = gpmc_cs_program_settings(async_cs, &tusb_async);
+ if (status < 0)
+ return status;
/* SYNC region, primarily for DMA */
status = gpmc_cs_request(sync, SZ_16M, (unsigned long *)
@@ -186,21 +193,12 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
return status;
}
tusb_resources[1].end = tusb_resources[1].start + 0x9ff;
+ tusb_sync.wait_pin = waitpin;
sync_cs = sync;
- gpmc_cs_write_reg(sync, GPMC_CS_CONFIG1,
- GPMC_CONFIG1_READMULTIPLE_SUPP
- | GPMC_CONFIG1_READTYPE_SYNC
- | GPMC_CONFIG1_WRITEMULTIPLE_SUPP
- | GPMC_CONFIG1_WRITETYPE_SYNC
- | GPMC_CONFIG1_PAGE_LEN(2)
- | GPMC_CONFIG1_WAIT_READ_MON
- | GPMC_CONFIG1_WAIT_WRITE_MON
- | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin)
- | GPMC_CONFIG1_DEVICESIZE_16
- | GPMC_CONFIG1_DEVICETYPE_NOR
- | GPMC_CONFIG1_MUXADDDATA
- /* fclk divider gets set later */
- );
+
+ status = gpmc_cs_program_settings(sync_cs, &tusb_sync);
+ if (status < 0)
+ return status;
/* IRQ */
status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq");
diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h
index 3319f5c..e7261eb 100644
--- a/arch/arm/mach-omap2/usb.h
+++ b/arch/arm/mach-omap2/usb.h
@@ -53,8 +53,17 @@
#define USBPHY_OTGSESSEND_EN (1 << 20)
#define USBPHY_DATA_POLARITY (1 << 23)
+struct usbhs_phy_data {
+ int port; /* 1 indexed port number */
+ int reset_gpio;
+ int vcc_gpio;
+ bool vcc_polarity; /* 1 active high, 0 active low */
+ void *platform_data;
+};
+
extern void usb_musb_init(struct omap_musb_board_data *board_data);
extern void usbhs_init(struct usbhs_omap_platform_data *pdata);
+extern int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys);
extern void am35x_musb_reset(void);
extern void am35x_musb_phy_power(u8 on);
OpenPOWER on IntegriCloud