summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2
diff options
context:
space:
mode:
authorTony Lindgren <tony@atomide.com>2008-10-06 15:49:15 +0300
committerTony Lindgren <tony@atomide.com>2008-10-06 15:49:15 +0300
commit1835f1d720786138c43147448f4527dd380c1e33 (patch)
tree4b37f611a33d69a6a479d181b06b2ed617e7280d /arch/arm/mach-omap2
parent6e81176dc8b7ec20da9f48b9be076e83f5d7d2ec (diff)
downloadop-kernel-dev-1835f1d720786138c43147448f4527dd380c1e33.zip
op-kernel-dev-1835f1d720786138c43147448f4527dd380c1e33.tar.gz
ARM: OMAP2: Move sleep.S into sleep24xx.S
Some register offsets are different for 242x and 243x. This will allow compiling sleep code for both chips into the same kernel. Pass the addresses for SDRC_DDLA_CTRL and SDRC_POWER to the omap24xx_cpu_suspend instead of loading the values since the only. Also fix a bug to call omap2_sram_suspend with the value of SDRC_DLLA_CTRL instead of the address as that's what omap24xx_cpu_suspend expects to determine between DDR and SDR. This bug has not been noticed as the boards seem to have DDR instead of SDR. Note that some PM patches are still missing. The PM patches will be added later on once the base files are in sync with linux-omap tree. Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/mach-omap2')
-rw-r--r--arch/arm/mach-omap2/Makefile5
-rw-r--r--arch/arm/mach-omap2/sleep24xx.S (renamed from arch/arm/mach-omap2/sleep.S)32
2 files changed, 19 insertions, 18 deletions
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index e7cf1b4..800639e 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -14,7 +14,10 @@ obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o
obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o
# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
+ifeq ($(CONFIG_PM),y)
+obj-y += pm.o
+obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o
+endif
# Clock framework
obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o
diff --git a/arch/arm/mach-omap2/sleep.S b/arch/arm/mach-omap2/sleep24xx.S
index 87a706f..43336b9 100644
--- a/arch/arm/mach-omap2/sleep.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -5,6 +5,10 @@
* Texas Instruments, <www.ti.com>
* Richard Woodruff <r-woodruff2@ti.com>
*
+ * (C) Copyright 2006 Nokia Corporation
+ * Fixed idle loop sleep
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
@@ -26,6 +30,8 @@
#include <mach/io.h>
#include <mach/pm.h>
+#include <mach/omap24xx.h>
+
#include "sdrc.h"
/* First address of reserved address space? apparently valid for OMAP2 & 3 */
@@ -52,15 +58,14 @@ ENTRY(omap24xx_idle_loop_suspend_sz)
.word . - omap24xx_idle_loop_suspend
/*
- * omap242x_cpu_suspend() - Forces OMAP into deep sleep state by completing
+ * omap24xx_cpu_suspend() - Forces OMAP into deep sleep state by completing
* SDRC shutdown then ARM shutdown. Upon wake MPU is back on so just restore
* SDRC.
*
* Input:
* R0 : DLL ctrl value pre-Sleep
- * R1 : Processor+Revision
- * 2420: 0x21 = 242xES1, 0x26 = 242xES2.2
- * 2430: 0x31 = 2430ES1, 0x32 = 2430ES2
+ * R1 : SDRC_DLLA_CTRL
+ * R2 : SDRC_POWER
*
* The if the DPLL is going to AutoIdle. It seems like the DPLL may be back on
* when we get called, but the DLL probably isn't. We will wait a bit more in
@@ -80,15 +85,14 @@ ENTRY(omap24xx_idle_loop_suspend_sz)
*/
ENTRY(omap24xx_cpu_suspend)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
- mov r3, #0x0 @ clear for mrc call
+ mov r3, #0x0 @ clear for mcr call
mcr p15, 0, r3, c7, c10, 4 @ memory barrier, hope SDR/DDR finished
nop
nop
- ldr r3, A_SDRC_POWER @ addr of sdrc power
- ldr r4, [r3] @ value of sdrc power
+ ldr r4, [r2] @ read SDRC_POWER
orr r4, r4, #0x40 @ enable self refresh on idle req
mov r5, #0x2000 @ set delay (DPLL relock + DLL relock)
- str r4, [r3] @ make it so
+ str r4, [r2] @ make it so
mov r2, #0
nop
mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt
@@ -97,14 +101,13 @@ loop:
subs r5, r5, #0x1 @ awake, wait just a bit
bne loop
- /* The DPLL has on before we take the DDR out of self refresh */
+ /* The DPLL has to be on before we take the DDR out of self refresh */
bic r4, r4, #0x40 @ now clear self refresh bit.
- str r4, [r3] @ put vlaue back.
+ str r4, [r2] @ write to SDRC_POWER
ldr r4, A_SDRC0 @ make a clock happen
- ldr r4, [r4]
+ ldr r4, [r4] @ read A_SDRC0
nop @ start auto refresh only after clk ok
movs r0, r0 @ see if DDR or SDR
- ldrne r1, A_SDRC_DLLA_CTRL_S @ get addr of DLL ctrl
strne r0, [r1] @ rewrite DLLA to force DLL reload
addne r1, r1, #0x8 @ move to DLLB
strne r0, [r1] @ rewrite DLLB to force DLL reload
@@ -116,13 +119,8 @@ loop2:
/* resume*/
ldmfd sp!, {r0 - r12, pc} @ restore regs and return
-A_SDRC_POWER:
- .word OMAP242X_SDRC_REGADDR(SDRC_POWER)
A_SDRC0:
.word A_SDRC0_V
-A_SDRC_DLLA_CTRL_S:
- .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
ENTRY(omap24xx_cpu_suspend_sz)
.word . - omap24xx_cpu_suspend
-
OpenPOWER on IntegriCloud