ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus

On OMAP4 the i2c1 bus is dedicated for the PMIC and audio related devices.
Manufacturers can opt to use different codec than twl6040 and also can add
audio related IC to the bus (external amplifier for example on SDP4430).

Make it possible to add different set of additional devices to i2c1 bus on
OMAP4 boards.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[tony@atomide.com: updated for removal of irqs.h]
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 11 insertions, 26 deletions

diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 99be94e..af93acc 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -40,16 +40,6 @@ static struct i2c_board_info __initdata pmic_i2c_board_info = {
 	.flags		= I2C_CLIENT_WAKE,
 };
 
-static struct i2c_board_info __initdata omap4_i2c1_board_info[] = {
-	{
-		.addr		= 0x48,
-		.flags		= I2C_CLIENT_WAKE,
-	},
-	{
-		I2C_BOARD_INFO("twl6040", 0x4b),
-	},
-};
-
 #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 static int twl_set_voltage(void *data, int target_uV)
 {
@@ -79,30 +69,25 @@ void __init omap_pmic_init(int bus, u32 clkrate,
 
 void __init omap4_pmic_init(const char *pmic_type,
 		    struct twl4030_platform_data *pmic_data,
-		    struct twl6040_platform_data *twl6040_data, int twl6040_irq)
+		    struct i2c_board_info *devices, int nr_devices)
 {
 	/* PMIC part*/
 	omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
-	strncpy(omap4_i2c1_board_info[0].type, pmic_type,
-		sizeof(omap4_i2c1_board_info[0].type));
-	omap4_i2c1_board_info[0].irq = 7 + OMAP44XX_IRQ_GIC_START;
-	omap4_i2c1_board_info[0].platform_data = pmic_data;
-
-	/* TWL6040 audio IC part */
-	omap4_i2c1_board_info[1].irq = twl6040_irq;
-	omap4_i2c1_board_info[1].platform_data = twl6040_data;
-
-	omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2);
+	omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data);
 
+	/* Register additional devices on i2c1 bus if needed */
+	if (devices)
+		i2c_register_board_info(1, devices, nr_devices);
 }
 
 void __init omap_pmic_late_init(void)
 {
-	/* Init the OMAP TWL parameters (if PMIC has been registered) */
-	if (pmic_i2c_board_info.irq)
-		omap3_twl_init();
-	if (omap4_i2c1_board_info[0].irq)
-		omap4_twl_init();
+	/* Init the OMAP TWL parameters (if PMIC has been registerd) */
+	if (!pmic_i2c_board_info.irq)
+		return;
+
+	omap3_twl_init();
+	omap4_twl_init();
 }
 
 #if defined(CONFIG_ARCH_OMAP3)