diff options
author | Paul Walmsley <paul@pwsan.com> | 2012-12-30 10:15:48 -0700 |
---|---|---|
committer | Paul Walmsley <paul@pwsan.com> | 2013-02-06 13:48:14 -0700 |
commit | 088e8806c411f76216002a8b37c7eb8563614822 (patch) | |
tree | bb6a6096a73515e6223a5dba9be7aa17d13b91bc /arch/arm/mach-omap2/sleep24xx.S | |
parent | 88b62b915b0b7e25870eb0604ed9a92ba4bfc9f7 (diff) | |
download | op-kernel-dev-088e8806c411f76216002a8b37c7eb8563614822.zip op-kernel-dev-088e8806c411f76216002a8b37c7eb8563614822.tar.gz |
ARM: OMAP2xxx: PM: enter WFI via inline asm if CORE stays active
There shouldn't be any need to jump to SRAM code if the OMAP CORE
clockdomain (and consequently the SDRAM controller and CORE PLL) stays
active during MPU WFI. The SRAM code should only be needed when the RAM
enters self-refresh. So in the case where CORE stays active, just call
WFI directly from the mach-omap2/pm24xx.c code. This removes some
unnecessary SRAM code.
This second version replaces the inline WFI with the corresponding
coprocessor register call, using tlbflush.h as an example. This is
because the assembler doesn't recognize WFI as a valid ARMv6
instruction.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Diffstat (limited to 'arch/arm/mach-omap2/sleep24xx.S')
-rw-r--r-- | arch/arm/mach-omap2/sleep24xx.S | 19 |
1 files changed, 0 insertions, 19 deletions
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S index ce0ccd26..1d3cb25 100644 --- a/arch/arm/mach-omap2/sleep24xx.S +++ b/arch/arm/mach-omap2/sleep24xx.S @@ -37,25 +37,6 @@ .text /* - * Forces OMAP into idle state - * - * omap24xx_idle_loop_suspend() - This bit of code just executes the WFI - * for normal idles. - * - * Note: This code get's copied to internal SRAM at boot. When the OMAP - * wakes up it continues execution at the point it went to sleep. - */ - .align 3 -ENTRY(omap24xx_idle_loop_suspend) - stmfd sp!, {r0, lr} @ save registers on stack - mov r0, #0 @ clear for mcr setup - mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt - ldmfd sp!, {r0, pc} @ restore regs and return - -ENTRY(omap24xx_idle_loop_suspend_sz) - .word . - omap24xx_idle_loop_suspend - -/* * omap24xx_cpu_suspend() - Forces OMAP into deep sleep state by completing * SDRC shutdown then ARM shutdown. Upon wake MPU is back on so just restore * SDRC. |