summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/serial.c
diff options
context:
space:
mode:
authorNishanth Menon <nm@ti.com>2010-08-02 13:18:12 +0300
committerTony Lindgren <tony@atomide.com>2010-08-02 13:18:12 +0300
commit5a927b36f56c2a937e67f0947f233f723660f690 (patch)
tree5dba76203c4da869632c511b7175187497ff2242 /arch/arm/mach-omap2/serial.c
parentbfe6977ac7b96e5a6665546c0efd733cd290d0ca (diff)
downloadop-kernel-dev-5a927b36f56c2a937e67f0947f233f723660f690.zip
op-kernel-dev-5a927b36f56c2a937e67f0947f233f723660f690.tar.gz
omap2/3/4: serial: introduce errata handling
introduce silicon specific quirks as a errata handling mechanism as a start UART_ERRATA_FIFO_FULL_ABORT is used to handle the override for fifo full condition for rx and tx. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/mach-omap2/serial.c')
-rw-r--r--arch/arm/mach-omap2/serial.c15
1 files changed, 10 insertions, 5 deletions
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 584a2ed..009b63f 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -37,6 +37,8 @@
#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52
#define UART_OMAP_WER 0x17 /* Wake-up enable register */
+#define UART_ERRATA_FIFO_FULL_ABORT (0x1 << 0)
+
/*
* NOTE: By default the serial timeout is disabled as it causes lost characters
* over the serial ports. This means that the UART clocks will stay on until
@@ -64,6 +66,7 @@ struct omap_uart_state {
struct list_head node;
struct platform_device pdev;
+ u32 errata;
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
int context_valid;
@@ -756,11 +759,13 @@ void __init omap_serial_init_port(int port)
* omap3xxx: Never read empty UART fifo on UARTs
* with IP rev >=0x52
*/
- if (cpu_is_omap44xx()) {
- uart->p->serial_in = serial_in_override;
- uart->p->serial_out = serial_out_override;
- } else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF)
- >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) {
+ if (cpu_is_omap44xx())
+ uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
+ else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF)
+ >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV)
+ uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
+
+ if (uart->errata & UART_ERRATA_FIFO_FULL_ABORT) {
uart->p->serial_in = serial_in_override;
uart->p->serial_out = serial_out_override;
}
OpenPOWER on IntegriCloud