summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/board-omap3beagle.c
diff options
context:
space:
mode:
authorTony Lindgren <tony@atomide.com>2010-09-27 10:19:44 -0700
committerTony Lindgren <tony@atomide.com>2010-09-27 10:19:44 -0700
commit98bb8c3e98267f2aa422bbafce3b734016e7ed02 (patch)
tree6f494fd5924d631691ec1ef73bd986ecff0539d9 /arch/arm/mach-omap2/board-omap3beagle.c
parentd58cc92bda765e62f28b12a8f4627ddee32978f0 (diff)
parent3da434acd4f7c7f5aeebd44fed42bf5ed9adfc44 (diff)
downloadop-kernel-dev-98bb8c3e98267f2aa422bbafce3b734016e7ed02.zip
op-kernel-dev-98bb8c3e98267f2aa422bbafce3b734016e7ed02.tar.gz
Merge branch 'devel-boards' into omap-for-linus
Diffstat (limited to 'arch/arm/mach-omap2/board-omap3beagle.c')
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c101
1 files changed, 99 insertions, 2 deletions
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 51493f5..7e70488 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -51,6 +51,93 @@
#define NAND_BLOCK_SIZE SZ_128K
+/*
+ * OMAP3 Beagle revision
+ * Run time detection of Beagle revision is done by reading GPIO.
+ * GPIO ID -
+ * AXBX = GPIO173, GPIO172, GPIO171: 1 1 1
+ * C1_3 = GPIO173, GPIO172, GPIO171: 1 1 0
+ * C4 = GPIO173, GPIO172, GPIO171: 1 0 1
+ * XM = GPIO173, GPIO172, GPIO171: 0 0 0
+ */
+enum {
+ OMAP3BEAGLE_BOARD_UNKN = 0,
+ OMAP3BEAGLE_BOARD_AXBX,
+ OMAP3BEAGLE_BOARD_C1_3,
+ OMAP3BEAGLE_BOARD_C4,
+ OMAP3BEAGLE_BOARD_XM,
+};
+
+static u8 omap3_beagle_version;
+
+static u8 omap3_beagle_get_rev(void)
+{
+ return omap3_beagle_version;
+}
+
+static void __init omap3_beagle_init_rev(void)
+{
+ int ret;
+ u16 beagle_rev = 0;
+
+ omap_mux_init_gpio(171, OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_gpio(172, OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_gpio(173, OMAP_PIN_INPUT_PULLUP);
+
+ ret = gpio_request(171, "rev_id_0");
+ if (ret < 0)
+ goto fail0;
+
+ ret = gpio_request(172, "rev_id_1");
+ if (ret < 0)
+ goto fail1;
+
+ ret = gpio_request(173, "rev_id_2");
+ if (ret < 0)
+ goto fail2;
+
+ gpio_direction_input(171);
+ gpio_direction_input(172);
+ gpio_direction_input(173);
+
+ beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1)
+ | (gpio_get_value(173) << 2);
+
+ switch (beagle_rev) {
+ case 7:
+ printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
+ omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
+ break;
+ case 6:
+ printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
+ omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
+ break;
+ case 5:
+ printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
+ omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
+ break;
+ case 0:
+ printk(KERN_INFO "OMAP3 Beagle Rev: xM\n");
+ omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
+ break;
+ default:
+ printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
+ omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
+ }
+
+ return;
+
+fail2:
+ gpio_free(172);
+fail1:
+ gpio_free(171);
+fail0:
+ printk(KERN_ERR "Unable to get revision detection GPIO pins\n");
+ omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
+
+ return;
+}
+
static struct mtd_partition omap3beagle_nand_partitions[] = {
/* All the partition sizes are listed in terms of NAND block size */
{
@@ -186,7 +273,10 @@ static struct gpio_led gpio_leds[];
static int beagle_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
- if (system_rev >= 0x20 && system_rev <= 0x34301000) {
+ if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
+ mmc[0].gpio_wp = -EINVAL;
+ } else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) ||
+ (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) {
omap_mux_init_gpio(23, OMAP_PIN_INPUT);
mmc[0].gpio_wp = 23;
} else {
@@ -323,13 +413,19 @@ static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
},
};
+static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
+ {
+ I2C_BOARD_INFO("eeprom", 0x50),
+ },
+};
+
static int __init omap3_beagle_i2c_init(void)
{
omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo,
ARRAY_SIZE(beagle_i2c_boardinfo));
/* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz */
- omap_register_i2c_bus(3, 100, NULL, 0);
+ omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, ARRAY_SIZE(beagle_i2c_eeprom));
return 0;
}
@@ -465,6 +561,7 @@ static struct omap_musb_board_data musb_board_data = {
static void __init omap3_beagle_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+ omap3_beagle_init_rev();
omap3_beagle_i2c_init();
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
OpenPOWER on IntegriCloud