Merge tag 'omap-for-v4.10/legacy-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Legacy platform_data removal for omaps for v4.10 merge window.
We've dropped the last legacy boot board-*.c files for mach-omap2
for v4.9 so now we can start removing the unused platform_data.

All of the below has been unused since v4.9 merge window:

- Drop legacy pmic init code
- Apply seq_puts() fixes for legacy mux code, then drop it
- Drop legacy serial init
- Drop legacy i2c init
- Drop legacy PM init
- Drop legacy twl4030 platform init
- Drop legacy USB host init
- Drop legacy muxing for tusb6010, n8x0 is still using it's
  platform init via pdata-quirks.c
- Drop legacy musb init
- Drop hwmod related legacy mux code
- Drop legacy hwmod data for omap3
- Drop legacy smsc911x and smc91x init
- Drop legacy board flash init
- Drop legacy ads7846 init
- Drop legacy sdram timings

* tag 'omap-for-v4.10/legacy-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits)
  ARM: OMAP2+: Drop legacy sdram timings
  ARM: OMAP2+: Drop legacy ads7846 init
  ARM: OMAP2+: Remove legacy board-flash.c
  ARM: OMAP2+: Remove legacy smsc911x and smc91x GPMC support
  ARM: OMAP2+: Remove legacy data from hwmod for omap3
  ARM: OMAP2+: Remove legacy mux code
  ARM: OMAP2+: Remove legacy hwmod mux code
  ARM: OMAP2+: Remove legacy usb-musb.c platform init code
  ARM: OMAP2+: Remove legacy muxing for usb-tusb6010.c
  ARM: OMAP2+: Remove legacy usb-host.c platform init code
  ARM: OMAP2+: Remove legacy twl4030 platform init code
  ARM: OMAP2+: Remove legacy PM init
  ARM: OMAP2+: Remove legacy i2c.c platform init code
  ARM: OMAP2+: Remove legacy serial.c
  ARM: OMAP2+: mux: Use seq_putc() in omap_mux_dbg_signal_show()
  ARM: OMAP2+: mux: Replace three seq_printf() calls by seq_puts()
  ARM: OMAP: kill omap_pmic_init
  ARM: OMAP2: kill omap2_pmic_init
  ARM: OMAP3: kill omap3_pmic_init
  ARM: OMAP3: kill omap3_pmic_get_config and twl_{get,set}_voltage
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 1 insertions, 15 deletions

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index e37ceb8..4698940 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -6,7 +6,7 @@ ccflags-y := -I$(srctree)/$(src)/include \
 	-I$(srctree)/arch/arm/plat-omap/include
 
 # Common support
-obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
+obj-y := id.o io.o control.o devices.o fb.o timer.o pm.o \
 	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
 	 omap_device.o omap-headsmp.o sram.o drm.o
 
@@ -63,9 +63,6 @@ obj-$(CONFIG_ARCH_OMAP4)		+= omap4-restart.o
 obj-$(CONFIG_SOC_OMAP5)			+= omap4-restart.o
 obj-$(CONFIG_SOC_DRA7XX)		+= omap4-restart.o
 
-# Pin multiplexing
-obj-$(CONFIG_ARCH_OMAP3)		+= mux34xx.o
-
 # SMS/SDRC
 obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 # obj-$(CONFIG_ARCH_OMAP3)		+= sdrc3xxx.o
@@ -235,26 +232,15 @@ obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 
 # Platform specific device init code
 
-omap-flash-$(CONFIG_MTD_NAND_OMAP2)	:= board-flash.o
-omap-flash-$(CONFIG_MTD_ONENAND_OMAP2)	:= board-flash.o
-obj-y					+= $(omap-flash-y) $(omap-flash-m)
-
 omap-hsmmc-$(CONFIG_MMC_OMAP_HS)	:= hsmmc.o
 obj-y					+= $(omap-hsmmc-m) $(omap-hsmmc-y)
 
-obj-y					+= usb-musb.o
 obj-y					+= omap_phy_internal.o
 
 obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
-obj-y					+= usb-host.o
 
 onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
 obj-y					+= $(onenand-m) $(onenand-y)
 
 nand-$(CONFIG_MTD_NAND_OMAP2)		:= gpmc-nand.o
 obj-y					+= $(nand-m) $(nand-y)
-
-smsc911x-$(CONFIG_SMSC911X)		:= gpmc-smsc911x.o
-obj-y					+= $(smsc911x-m) $(smsc911x-y)
-
-obj-y					+= common-board-devices.o twl-common.o dss-common.o