diff options
author | Paul Walmsley <paul@pwsan.com> | 2010-12-21 21:05:14 -0700 |
---|---|---|
committer | Paul Walmsley <paul@pwsan.com> | 2010-12-21 21:05:14 -0700 |
commit | 2ace831ffc8feaffb8bc03da89ff43d948efdc97 (patch) | |
tree | 4a75814c417ffe94dd2505585305378b7f04b40e /arch/arm/mach-omap2/Makefile | |
parent | f0611a5c220e50dec65041b10bd2fe9484f061a6 (diff) | |
download | op-kernel-dev-2ace831ffc8feaffb8bc03da89ff43d948efdc97.zip op-kernel-dev-2ace831ffc8feaffb8bc03da89ff43d948efdc97.tar.gz |
OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
In some ways, the OMAP4 PRCM register layout is quite different than
the OMAP2/3 PRCM register layout. For example, on OMAP2/3, from a
register layout point of view, all CM instances were located in the CM
subsystem, and all PRM instances were located in the PRM subsystem.
OMAP4 changes this. Now, for example, some CM instances, such as
WKUP_CM and EMU_CM, are located in the system PRM subsystem. And a
"local PRCM" exists for the MPU - this PRCM combines registers that
would normally appear in both CM and PRM instances, but uses its own
register layout which matches neither the OMAP2/3 PRCM layout nor the
OMAP4 PRCM layout.
To try to deal with this, introduce some new functions, omap4_cminst*
and omap4_prminst*. The former is to be used when writing to a CM
instance register (no matter what subsystem or hardware module it
exists in), and the latter, similarly, with PRM instance registers.
To determine which "PRCM partition" to write to, the functions take a
PRCM instance ID argument. Subsequent patches add these partition IDs
to the OMAP4 powerdomain and clockdomain definitions.
As far as I can see, there's really no good way to handle these types
of register access inconsistencies. This patch seemed like the least
bad approach.
Moving forward, the long-term goal is to remove all direct PRCM
register access from the PM code. PRCM register access should go
through layers such as the powerdomain and clockdomain code that can
hide the details of how to interact with the specific hardware
variant.
While here, rename cm4xxx.c to cm44xx.c to match the naming convention
of the other OMAP4 PRCM files.
Thanks to Santosh Shilimkar <santosh.shilimkar@ti.com>, Rajendra Nayak
<rnayak@ti.com>, and Benoît Cousson <b-cousson@ti.com> for some comments.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Diffstat (limited to 'arch/arm/mach-omap2/Makefile')
-rw-r--r-- | arch/arm/mach-omap2/Makefile | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index b2e4f7b..1fce382 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -77,7 +77,9 @@ obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o # XXX The presence of cm2xxx_3xxx.o on the line below is temporary and # will be removed once the OMAP4 part of the codebase is converted to # use OMAP4-specific PRCM functions. -obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cm4xxx.o +obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \ + cm44xx.o prcm_mpu44xx.o \ + prminst44xx.o # OMAP powerdomain framework powerdomain-common += powerdomain.o powerdomain-common.o |